BECOME A CORE MEMBER HERE

Author Topic: Undercover fab works skid plate  (Read 4805 times)

Offline tjvineyard

  • Visitor
  • Posts: 121
  • KARMA : +0/-0
Undercover fab works skid plate
« on: March 20, 2013, 01:53:33 PM »
This is the one. http://www.undercoverfab.com/transfer-case-skid-plates/11-hd-transfer-case-skid-plate-for-97-02-jeep-wrangler-tj-carbon.html

Its practically new, was installed for around 40 miles but was causing my pinion angle to be off so I went back to factory skid. This thing makes quite the difference in ground clearance compared to factory. Skid plate only you will need to provide your own hardware.

240.00 obo txt 7069137454 for pics.
Nathan Vineyard
2000 TJ 4.0 Manual
If I wanted a HUMMER I'd ask your sister (OIIIIIIO)

Offline Skandalous

  • Visitor
  • Posts: 981
  • KARMA : +6/-5
Re: Undercover fab works skid plate
« Reply #1 on: March 20, 2013, 03:51:02 PM »
Ive been looking at picking up one of these lately.  I just ordered my SYE and Tom woods driveshaft from ALLSOUTH just for this purpose.  If you can hold it for a week or two I would most likely be interested if I dont decide to fab one myself.
Thomas ,  Annie , Gibson and Baily and Tonkacon.

Offline Skandalous

  • Visitor
  • Posts: 981
  • KARMA : +6/-5
Re: Undercover fab works skid plate
« Reply #2 on: March 20, 2013, 03:52:17 PM »
CRAP never mind just realized it was for up to 02 and mine is a 06  ::) ::) ::)
Thomas ,  Annie , Gibson and Baily and Tonkacon.

Offline tjvineyard

  • Visitor
  • Posts: 121
  • KARMA : +0/-0
Re: Undercover fab works skid plate
« Reply #3 on: March 26, 2013, 11:14:07 AM »
Will take 200.00 cash
Nathan Vineyard
2000 TJ 4.0 Manual
If I wanted a HUMMER I'd ask your sister (OIIIIIIO)

Offline tjvineyard

  • Visitor
  • Posts: 121
  • KARMA : +0/-0
Re: Undercover fab works skid plate
« Reply #4 on: March 30, 2013, 05:43:31 PM »
figured this would be an easy sell, any offers out there?
Nathan Vineyard
2000 TJ 4.0 Manual
If I wanted a HUMMER I'd ask your sister (OIIIIIIO)

Offline tjvineyard

  • Visitor
  • Posts: 121
  • KARMA : +0/-0
Re: Undercover fab works skid plate
« Reply #5 on: April 04, 2013, 04:41:00 PM »
200.00
Nathan Vineyard
2000 TJ 4.0 Manual
If I wanted a HUMMER I'd ask your sister (OIIIIIIO)

Online lt99ls1

  • C.O.R.E MEMBER
  • *
  • Posts: 5444
  • KARMA : +16/-19
Re: Undercover fab works skid plate
« Reply #6 on: April 05, 2013, 08:20:33 AM »
These skids are tough as nails.
Larry

05 LJ
20 BabyMax

BigJerm

  • Guest
Re: Undercover fab works skid plate
« Reply #7 on: April 05, 2013, 08:46:12 AM »
These skids are tough as nails.

X2. I have the no lift skid and it takes some serious hits with me being so low. Has cracked quite a few rocks

Offline Skandalous

  • Visitor
  • Posts: 981
  • KARMA : +6/-5
Re: Undercover fab works skid plate
« Reply #8 on: April 06, 2013, 11:22:57 PM »
Any idea what the difference between this and the 06 version would be?
Thomas ,  Annie , Gibson and Baily and Tonkacon.

Online lt99ls1

  • C.O.R.E MEMBER
  • *
  • Posts: 5444
  • KARMA : +16/-19
Re: Undercover fab works skid plate
« Reply #9 on: April 07, 2013, 08:28:06 AM »
Any idea what the difference between this and the 06 version would be?
 
Bolt holes locations are different.
Larry

05 LJ
20 BabyMax

Offline tjvineyard

  • Visitor
  • Posts: 121
  • KARMA : +0/-0
Re: Undercover fab works skid plate
« Reply #10 on: April 16, 2013, 02:36:20 PM »
offers??
Nathan Vineyard
2000 TJ 4.0 Manual
If I wanted a HUMMER I'd ask your sister (OIIIIIIO)

Offline Skandalous

  • Visitor
  • Posts: 981
  • KARMA : +6/-5
Re: Undercover fab works skid plate
« Reply #11 on: April 16, 2013, 02:41:26 PM »
is it just the mounting bolts that are different or the TC as well?  I have been trying to figure this out but have not been able to.  If its just the mounting holes to the frame rails that can be rectified but if the TC mounting holes are different thats another story. 
Thomas ,  Annie , Gibson and Baily and Tonkacon.

 



BECOME A CORE MEMBER HERE

CHECK OUT OUR CLUB WEBSITE

JOIN US ON FACEBOOK

JOIN US ON INSTAGRAM