BECOME A CORE MEMBER HERE

Author Topic: ARB Deal at JCWhitney - Am I reading this correctly..?  (Read 1874 times)

Offline 94xjsport94

  • Visitor
  • Posts: 3023
  • KARMA : +39/-65
  • Cherocar
Re: Am I reading this correctly..?
« Reply #24 on: January 21, 2014, 04:58:01 PM »
That's what I'm about to do.
Will

94 seXj

Offline 94xjsport94

  • Visitor
  • Posts: 3023
  • KARMA : +39/-65
  • Cherocar
Re: Am I reading this correctly..?
« Reply #25 on: January 21, 2014, 05:20:23 PM »
They dont have an ARB for a 14B with anything higher than 4.10's... Or the Sterling 10.5 rear. Only 60's... Damn it.
Will

94 seXj

Offline Mortalis5509

  • C.O.R.E MEMBER
  • *
  • Posts: 4444
  • KARMA : +70/-640
Re: Am I reading this correctly..?
« Reply #26 on: January 21, 2014, 06:03:28 PM »
They dont have an ARB for a 14B with anything higher than 4.10's... Or the Sterling 10.5 rear. Only 60's... Damn it.

I looked into that last night and found the same thing.
Go DAWGS

Skinny Pedal Racing

Offline 94xjsport94

  • Visitor
  • Posts: 3023
  • KARMA : +39/-65
  • Cherocar
Re: Am I reading this correctly..?
« Reply #27 on: January 21, 2014, 06:11:27 PM »
Front would be nice, but it has manual hubs so being welded shouldnt be a big deal. Oh well, life goes on.

Everyone who can should take advantage of this, I'm not even charging a fee!
Will

94 seXj

Online Big Dave

  • C.O.R.E MEMBER
  • *
  • Posts: 5574
  • KARMA : +26/-56
Re: Am I reading this correctly..?
« Reply #28 on: January 21, 2014, 06:11:36 PM »
You can't use the 10% with the ARB, I guess they figured they are discounted enough. LOL.

Offline BlueJew

  • C.O.R.E MEMBER
  • *
  • Posts: 990
  • KARMA : +16/-34
Re: Am I reading this correctly..?
« Reply #29 on: January 21, 2014, 06:13:16 PM »
For the rubi locker, it says 373 and down ratio...it was too good to be true.
Blue Wes

Offline 94xjsport94

  • Visitor
  • Posts: 3023
  • KARMA : +39/-65
  • Cherocar
Re: Am I reading this correctly..?
« Reply #30 on: January 21, 2014, 06:15:43 PM »
Use thick cut gears.
Will

94 seXj

Offline DOUG

  • Visitor
  • Posts: 21029
  • KARMA : +112/-657
Re: Re: Re: Am I reading this correctly..?
« Reply #31 on: January 21, 2014, 06:43:12 PM »
For the rubi locker, it says 373 and down ratio...it was too good to be true.

Use it with thick gears.  Done. Same trippy is doing.

Sent off camber

Offline Mortalis5509

  • C.O.R.E MEMBER
  • *
  • Posts: 4444
  • KARMA : +70/-640
Re: Am I reading this correctly..?
« Reply #32 on: January 21, 2014, 07:02:39 PM »
For the rubi locker, it says 373 and down ratio...it was too good to be true.

Get RD117 for the TJ rubi. The rear locker is weak. The fronts are actually pretty good. Many people put the front in the rear. I bought 2 at that price. I could sell my rubi lockers and compressor and break even with a better set up.
Go DAWGS

Skinny Pedal Racing

Offline clark123456

  • C.O.R.E MEMBER
  • *
  • Posts: 16606
  • KARMA : +276/-792
Re: Am I reading this correctly..?
« Reply #33 on: January 21, 2014, 07:08:58 PM »
For the rubi locker, it says 373 and down ratio...it was too good to be true.

You can get RD116, which is the bigger carrier, for cheaper than all other sites I found via google shopping ($624 vs $1K).  I like the idea of the smaller carrier with thick cut gears.
Clark
1998 TJ Sahara

Offline BlueJew

  • C.O.R.E MEMBER
  • *
  • Posts: 990
  • KARMA : +16/-34
Re: Am I reading this correctly..?
« Reply #34 on: January 21, 2014, 07:46:14 PM »
For the rubi locker, it says 373 and down ratio...it was too good to be true.

Get RD117 for the TJ rubi. The rear locker is weak. The fronts are actually pretty good. Many people put the front in the rear. I bought 2 at that price. I could sell my rubi lockers and compressor and break even with a better set up.

Just did the same thing.  Ordered two and called it a day.
Blue Wes

Offline ATLSRT8

  • Visitor
  • Posts: 757
  • KARMA : +14/-20
Re: Am I reading this correctly..?
« Reply #35 on: January 21, 2014, 09:42:55 PM »
I feel like I am taking crazy pills, I can't figure the site out for the life of me. I want to order 2 for my xj but I have no clue what my D70 came out of in rear and I can't search by axle type only vehicle type. Also have a kingpin 60 front, but whenever I search 78-79f250 it just shows me D44 options. This is frustrating haha

 



BECOME A CORE MEMBER HERE

CHECK OUT OUR CLUB WEBSITE

JOIN US ON FACEBOOK

JOIN US ON INSTAGRAM