MAR 7-9 2014 GOLDEN MOUNTAIN PHOTOS

[clark123456]

Carnage Report:

- Kell broke another finger nail - Solution is to cut finger nails shorter
- Bent front driver's side fender due to full flex/stuff - Solution will likely be to get/make new fenders with slightly more clearance
- Scratched several things - Solution will be to paint things
- CB antenna mount (aluminum) finally gave up its support - Solution will be to weld a mount (steel) to the rear bumper

[cru9]

Lets see, my carnage went as follows:
Rocker scars
Mangled front axle arm mounts (hung down too low anyways)
Pinched frame side front arm mount bushing between mount
Broke off zerk fitting on rear arm
Rear pinion seal is gone
Rear bumper nicked from backing into a tree (oops)
Really need to notch frame and push bumper forward about 1/8" for front tire clearance as they are rubbing
Rear driveshaft is rubbing on evap skid at full flex (may have caused rear pinion seal failure)
Broke plastic tag bracket by backing into another tree (I see a pattern here, don't get behind me)

I might still have my tag bracket if you want it. I will have to look tonight

[PyratM]

Lets see, my carnage went as follows:
Rocker scars
Mangled front axle arm mounts (hung down too low anyways)
Pinched frame side front arm mount bushing between mount
Broke off zerk fitting on rear arm
Rear pinion seal is gone
Rear bumper nicked from backing into a tree (oops)
Really need to notch frame and push bumper forward about 1/8" for front tire clearance as they are rubbing
Rear driveshaft is rubbing on evap skid at full flex (may have caused rear pinion seal failure)
Broke plastic tag bracket by backing into another tree (I see a pattern here, don't get behind me)

I might still have my tag bracket if you want it. I will have to look tonight

I'm putting on the PS Tramp Stamp, so the bracket was coming off anyways. Thanks for the offer though.

[BeerIAm]

Damn.  It sounds like Allsouth needs to open up a shop inside the park.  Could charge a premium!

[jgerhard]

Damn.  It sounds like Allsouth needs to open up a shop inside the park.  Could charge a premium!

We roll with extra parts and trailers, water and food.  If you have the part someone needs (tie rod, axle) then you get to charge the premium  //LMAO//.

Blue Wes has nice power tools too.  If someone had a portable welder, that would be the nuts.

[Krawler00]

 //:'(// I was stuck in FL for work. Would have loved to see the place. Atleast now I can get a guided tour next trip

[Raisinhead]

Ben, it was your kind of park. You'll love it. I'd like to go back before next year.

Sent from my SAMSUNG-SGH-I537 using Tapatalk

[Krawler00]

Ben, it was your kind of park. You'll love it. I'd like to go back before next year.

Sent from my SAMSUNG-SGH-I537 using Tapatalk

Doug sent me a text. rocks rocks rocks rocks. So yes, my kind of park  //;D// the more technical the better

[lt99ls1]

Damn.  It sounds like Allsouth needs to open up a shop inside the park.  Could charge a premium!

We roll with extra parts and trailers, water and food.  If you have the part someone needs (tie rod, axle) then you get to charge the premium  //LMAO//.

Blue Wes has nice power tools too.  If someone had a portable welder, that would be the nuts.

I all ways have a welder back at camp on the 3 day wheeling trips. Had to carry a generator and welder to Mason jar in Harlan to weld the ram mount back on the old Tj one time.  //:hlp//

[Krawler00]

Damn.  It sounds like Allsouth needs to open up a shop inside the park.  Could charge a premium!

We roll with extra parts and trailers, water and food.  If you have the part someone needs (tie rod, axle) then you get to charge the premium  //LMAO//.

Blue Wes has nice power tools too.  If someone had a portable welder, that would be the nuts.

I all ways have a welder back at camp on the 3 day wheeling trips. Had to carry a generator and welder to Mason jar in Harlan to weld the ram mount back on the old Tj one time.  //:hlp//

 //letseat// great trip.

[Kennisau]

[jgerhard]

awesome pics brant!