SHOP TALK > Wrench Day

Welding/ lift install help

(1/3) > >>

Grizzly4x4:
Hello,
If there are any welders out there who would be willing to give up a day or two to help me, I would be willing to pay you for your time ( food and drink of choice too of course  //cheers2//).

I have ordered a spoa lift for my samurai that involves welding new spring perches and shock mounts on. I do not have a welder nor experience with one so I am looking for help.

LUVNMY06TJ:
There are a few guys on here who definitely have the experience, but alas I am not one. Good luck!

clark123456:
I have the tools, but not the time.  I recommend you get a welder and start learning how to weld.  I went with a very nice 120v flux core mig welder, but if I had it to do again I'd go with an average 220v welder with gas instead of flux core.  Once you have a welder you will use it a bunch.  Craigslist is a good place to find a welder, but be sure to get forum feedback before buying one to make sure it is a value.

Good luck.

- Torg

patman:
How far do you want to go? I have a friend in Trenton, SC who may be up for it

Mortalis5509:
I have a Hobart 220v that works nicely. Not very expensive.

Navigation

[0] Message Index

[#] Next page