Extreme Metal Products

[DOUG]

Heres the same one for 97-02.  It's what Skippy has on his yellow TJ.

http://www.4wheelerssupply.com/catalog/product_info.php/products_id/71488

Skippy?  ???   ;D ()()

[Will]

I got dibs on your old woody!

His might use bigger U-joints I believe. But you can easily fix that with a bigger yoke when you buy an sye and an adapter at the rear end. It might just be the axle U-joints that are bigger on the Rubis.

[Krawler00]

Chris, I sent an email over to the guys selling that red skid about the disclaimer saying you need to buy the trans mount and the trans shifter bracket. He said the OE trans mount is replaced and the bracket was for the linkage... ok, no problem. So he also says it will need the lowering kit... what? Did you lower yours? So anyway, grand total out the door would be 485.36! I can go get the 33 engineering one for less than that. Just curious as to if you needed the extras. I know I will need the trans bracket for sure, cheaper through advanced probabaly. But anyway, I think I will go with 33 engineering just because it is a 2 piece design and would sure help out being able to remove the skid.