BECOME A CORE MEMBER HERE

Author Topic: Wanted..4.0 Jeep cylinder head  (Read 2353 times)

Offline vonschlick

  • Visitor
  • Posts: 11
  • KARMA : +1/-1
Wanted..4.0 Jeep cylinder head
« on: March 30, 2016, 08:18:17 AM »
looking for a 2000 and newer 4.0 cylinder head..pm me
Bill

The best journeys answer questions that in the beginning you never even thought to ask........

Offline 94xjsport94

  • Visitor
  • Posts: 3023
  • KARMA : +39/-65
  • Cherocar
Re: Wanted..4.0 Jeep cylinder head
« Reply #1 on: March 30, 2016, 09:09:07 AM »
What casting number?
Will

94 seXj

Offline vonschlick

  • Visitor
  • Posts: 11
  • KARMA : +1/-1
Re: Wanted..4.0 Jeep cylinder head
« Reply #2 on: March 31, 2016, 07:36:07 AM »
0331 if its not cracked....or 312
Bill

The best journeys answer questions that in the beginning you never even thought to ask........

Offline 94xjsport94

  • Visitor
  • Posts: 3023
  • KARMA : +39/-65
  • Cherocar
Re: Wanted..4.0 Jeep cylinder head
« Reply #3 on: March 31, 2016, 04:41:16 PM »
Was going to say I have some older ones from 98-99's if you just want to plug the sender in the back of the head.
Will

94 seXj

Offline Big Dave

  • C.O.R.E MEMBER
  • *
  • Posts: 5573
  • KARMA : +26/-56
Re: Wanted..4.0 Jeep cylinder head
« Reply #4 on: March 31, 2016, 07:18:14 PM »
And not worry that it will crack.

Offline 94xjsport94

  • Visitor
  • Posts: 3023
  • KARMA : +39/-65
  • Cherocar
Re: Wanted..4.0 Jeep cylinder head
« Reply #5 on: March 31, 2016, 08:56:44 PM »
..!.. :D ..!..
Will

94 seXj

Offline vonschlick

  • Visitor
  • Posts: 11
  • KARMA : +1/-1
Re: Wanted..4.0 Jeep cylinder head
« Reply #6 on: April 04, 2016, 04:36:33 PM »
thanks for the reply, ill keep you in mind when i need an early style head.. un fortunately it wonk work on this on, needs coil rail mounting pedestals and ports are different.. thanks again
Bill

The best journeys answer questions that in the beginning you never even thought to ask........

Offline 94xjsport94

  • Visitor
  • Posts: 3023
  • KARMA : +39/-65
  • Cherocar
Re: Wanted..4.0 Jeep cylinder head
« Reply #7 on: April 04, 2016, 05:32:08 PM »
You can use a 0630 head just fine. Same dowel alignment pins. Just need a matching exhaust manifold and to build tabs off the valve cover studs. Got one that has like 130k on it and a different one that was rebuilt, put on, and the bottom end went out on on start up so 0 miles. Also have a exhaust manifold but it's cracked and needs to be weldered up.


Will

94 seXj

Offline 94xjsport94

  • Visitor
  • Posts: 3023
  • KARMA : +39/-65
  • Cherocar
Re: Wanted..4.0 Jeep cylinder head
« Reply #8 on: April 04, 2016, 05:37:27 PM »
Also assuming it's not a California emissions with 14 cats on it.
Will

94 seXj

 



BECOME A CORE MEMBER HERE

CHECK OUT OUR CLUB WEBSITE

JOIN US ON FACEBOOK

JOIN US ON INSTAGRAM