OPEN RIDES & EVENTS > Past Rides : Pictures, Discussion, & Carnage
JULY 15TH-17TH : Hale Mtn Pictures and Stories
kent10sne1:
--- Quote from: Doug on July 18, 2016, 09:49:20 AM ---
--- Quote from: kent10sne1 on July 18, 2016, 08:43:53 AM ---I'm sure, just my luck. going to head to Allsouth today or tomorrow to pick up my MC rear Adj sway bar i got from Don.
--- End quote ---
Track bar?
--- End quote ---
ya ya.. i was in a hurry.. sorry..
DOUG:
--- Quote from: Jeeptrk on July 18, 2016, 09:28:05 AM ---had to bail out Saturday morning and cmon home, late friday evening my fan got into the shroud and overheated. tore the plastic outta the way and kept wheeling before i knew what had actually caused it. Checked it Saturday morning when we got to the parking lot and realized all 3 of the bolts on the driver side had worked loose and 2 of them had sheared off at the block, letting the motor and drivetrain shift, causing the fan to destroy the shroud. I had already hooked up the trailer and was planning to head out Saturday afternoon, so i just went ahead and loaded the LJ and headed out... Just couldnt force myself to take the time to fix it in a parking lot and it 90* out. It will involve pulling the motor more than likely, sucks because it was avoidable with a simple check before heading out, i just missed it.
Other than that, had a blast. and yes the Chiggars were horrible, im probly bit 50 or so times.
--- End quote ---
Well if you have to pull the motor might as well put a better one in...
8lugLJ:
--- Quote from: Doug on July 18, 2016, 09:50:49 AM ---
--- Quote from: Jeeptrk on July 18, 2016, 09:28:05 AM ---had to bail out Saturday morning and cmon home, late friday evening my fan got into the shroud and overheated. tore the plastic outta the way and kept wheeling before i knew what had actually caused it. Checked it Saturday morning when we got to the parking lot and realized all 3 of the bolts on the driver side had worked loose and 2 of them had sheared off at the block, letting the motor and drivetrain shift, causing the fan to destroy the shroud. I had already hooked up the trailer and was planning to head out Saturday afternoon, so i just went ahead and loaded the LJ and headed out... Just couldnt force myself to take the time to fix it in a parking lot and it 90* out. It will involve pulling the motor more than likely, sucks because it was avoidable with a simple check before heading out, i just missed it.
Other than that, had a blast. and yes the Chiggars were horrible, im probly bit 50 or so times.
--- End quote ---
Well if you have to pull the motor might as well put a better one in...
--- End quote ---
thats a big nope.. they guys were already talking that smack when i was loading up. I want to build a 4.7 stroker for it before i do some swap thats gonna cost retarded money. i have the spare motor to do it, so i wont be down for an extended amount of time.
patman:
--- Quote from: Jeeptrk on July 18, 2016, 09:28:05 AM ---had to bail out Saturday morning and cmon home, late friday evening my fan got into the shroud and overheated. tore the plastic outta the way and kept wheeling before i knew what had actually caused it. Checked it Saturday morning when we got to the parking lot and realized all 3 of the bolts on the driver side had worked loose and 2 of them had sheared off at the block, letting the motor and drivetrain shift, causing the fan to destroy the shroud. I had already hooked up the trailer and was planning to head out Saturday afternoon, so i just went ahead and loaded the LJ and headed out... Just couldnt force myself to take the time to fix it in a parking lot and it 90* out. It will involve pulling the motor more than likely, sucks because it was avoidable with a simple check before heading out, i just missed it.
Other than that, had a blast. and yes the Chiggars were horrible, im probly bit 50 or so times.
--- End quote ---
Bummed I didn't get to wheel with y'all. Hopefully GATR fest...
And all of y'all must have scared off the chiggers, I didn't get a single bite from anything this wekend (no poison ivy either!)
clark123456:
--- Quote from: Jeeptrk on July 18, 2016, 10:17:38 AM ---
--- Quote from: Doug on July 18, 2016, 09:50:49 AM ---
--- Quote from: Jeeptrk on July 18, 2016, 09:28:05 AM ---had to bail out Saturday morning and cmon home, late friday evening my fan got into the shroud and overheated. tore the plastic outta the way and kept wheeling before i knew what had actually caused it. Checked it Saturday morning when we got to the parking lot and realized all 3 of the bolts on the driver side had worked loose and 2 of them had sheared off at the block, letting the motor and drivetrain shift, causing the fan to destroy the shroud. I had already hooked up the trailer and was planning to head out Saturday afternoon, so i just went ahead and loaded the LJ and headed out... Just couldnt force myself to take the time to fix it in a parking lot and it 90* out. It will involve pulling the motor more than likely, sucks because it was avoidable with a simple check before heading out, i just missed it.
Other than that, had a blast. and yes the Chiggars were horrible, im probly bit 50 or so times.
--- End quote ---
Well if you have to pull the motor might as well put a better one in...
--- End quote ---
thats a big nope.. they guys were already talking that smack when i was loading up. I want to build a 4.7 stroker for it before i do some swap thats gonna cost retarded money. i have the spare motor to do it, so i wont be down for an extended amount of time.
--- End quote ---
Do you have a good stroke shop? I might be interested.
Sent from my XT1254 using Tapatalk
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version