BECOME A CORE MEMBER HERE

Author Topic: GenRight JKU Cage install  (Read 4691 times)

Offline Mortalis5509

  • C.O.R.E MEMBER
  • *
  • Posts: 3615
  • KARMA : +70/-639
Re: GenRight JKU Cage install
« Reply #12 on: August 17, 2016, 09:06:56 PM »
I know who's rig this is

Sent from my SM-G935V using Tapatalk

Go DAWGS

Skinny Pedal Racing

Online Anvilsam

  • Sam
  • C.O.R.E MEMBER
  • *
  • Posts: 1447
  • KARMA : +114/-1555
Re: GenRight JKU Cage install
« Reply #13 on: August 17, 2016, 09:11:02 PM »
Just sayin. It's @Raisinhead idol

Online Doug

  • GATR SENIOR STAFF
  • *
  • Posts: 20693
  • KARMA : +112/-656
Re: GenRight JKU Cage install
« Reply #14 on: August 17, 2016, 09:24:45 PM »
B pillar delete purely aesthetic?

Not for those that will run full doors at times or daily drivers with full tops?

Helluva show rig.

So the upright B pillar is gone in comparison?

« Last Edit: August 17, 2016, 09:26:44 PM by Doug »

Online Raisinhead

  • Paco De Gallo
  • GATR STAFF
  • *
  • Posts: 5760
  • KARMA : +52/-93
    • My Build Thread
Re: GenRight JKU Cage install
« Reply #15 on: August 17, 2016, 10:04:34 PM »
B pillar delete purely aesthetic?

Not for those that will run full doors at times or daily drivers with full tops?

Helluva show rig.

So the upright B pillar is gone in comparison?



No, not purely aesthetic. It can be taken off or reattached it I understand correctly. Retain stock functionality, but be able to put it into a tree without hesitation. I can think of a handful of trails (2 hardcore trails) that would make this beneficial for the 4 door guys - upper helderado, lions den, mason jar, etc. I'm jealous of the possibilities for sure.


Sent from my iPhone using Tapatalk
Jay
2011 JKU

"Sometimes you have to go home now, in order to go big later" - someone that understands life

Online patman

  • C.O.R.E MEMBER
  • *
  • Posts: 2699
  • KARMA : +32/-40
Re: GenRight JKU Cage install
« Reply #16 on: August 18, 2016, 07:40:52 AM »
Looks sweet. The JCPenny parking lot won't know what hit it
Patrick

Online BigMike

  • C.O.R.E MEMBER
  • *
  • Posts: 2891
  • KARMA : +31/-77
Re: GenRight JKU Cage install
« Reply #17 on: August 18, 2016, 07:44:43 AM »
It must be getting pretty rough at the mall to need a cage like that!  //BEER//
« Last Edit: August 18, 2016, 07:45:09 AM by BigMike »

Offline tcdawg

  • Anthony Smooth
  • GATR STAFF
  • *
  • Posts: 10628
  • KARMA : +81/-81
Re: GenRight JKU Cage install
« Reply #18 on: August 18, 2016, 07:50:23 AM »
Looks sweet. The JCPenny parking lot won't know what hit it

it's Jacques Penne, pronunciation is everything

Offline tcdawg

  • Anthony Smooth
  • GATR STAFF
  • *
  • Posts: 10628
  • KARMA : +81/-81
Re: GenRight JKU Cage install
« Reply #19 on: August 18, 2016, 08:01:23 AM »
here is the tie-in question answered directly from Genright

"We tie into the body right above each body mount, so it leaves the rubber mounted body mount for comfort and quietness, but almost as good as a direct mounted urethane mount.

 We found the direct or rigid mounting of the cage to the frame, causes cracks in the body and other things after about 3 years."

Offline Blue J

  • C.O.R.E MEMBER
  • *
  • Posts: 1730
  • KARMA : +19/-133
  • Jimbo
Re: GenRight JKU Cage install
« Reply #20 on: August 18, 2016, 08:23:32 AM »
So then is the body reinforced at the cage mount? to transfer the Load to the Body mount? it seems like the energy would not transfer to the body mount, unless it was tied in directly.
Jimbo
'13 True Blue JKU

Online Raisinhead

  • Paco De Gallo
  • GATR STAFF
  • *
  • Posts: 5760
  • KARMA : +52/-93
    • My Build Thread
Re: GenRight JKU Cage install
« Reply #21 on: August 18, 2016, 09:04:27 AM »
here is the tie-in question answered directly from Genright

"We tie into the body right above each body mount, so it leaves the rubber mounted body mount for comfort and quietness, but almost as good as a direct mounted urethane mount.

 We found the direct or rigid mounting of the cage to the frame, causes cracks in the body and other things after about 3 years."

Have any of you read anything about body cracks from frame tie in? I have not. Frame tie in was one of the driving factors for picking the one I did.


Sent from my iPhone using Tapatalk
Jay
2011 JKU

"Sometimes you have to go home now, in order to go big later" - someone that understands life

Online BigMike

  • C.O.R.E MEMBER
  • *
  • Posts: 2891
  • KARMA : +31/-77
Re: GenRight JKU Cage install
« Reply #22 on: August 18, 2016, 09:27:11 AM »
here is the tie-in question answered directly from Genright

"We tie into the body right above each body mount, so it leaves the rubber mounted body mount for comfort and quietness, but almost as good as a direct mounted urethane mount.

 We found the direct or rigid mounting of the cage to the frame, causes cracks in the body and other things after about 3 years."

Have any of you read anything about body cracks from frame tie in? I have not. Frame tie in was one of the driving factors for picking the one I did.


Sent from my iPhone using Tapatalk

Check back in 3 years  //cheers2//

Online Raisinhead

  • Paco De Gallo
  • GATR STAFF
  • *
  • Posts: 5760
  • KARMA : +52/-93
    • My Build Thread
Re: GenRight JKU Cage install
« Reply #23 on: August 18, 2016, 09:28:24 AM »
here is the tie-in question answered directly from Genright

"We tie into the body right above each body mount, so it leaves the rubber mounted body mount for comfort and quietness, but almost as good as a direct mounted urethane mount.

 We found the direct or rigid mounting of the cage to the frame, causes cracks in the body and other things after about 3 years."

Have any of you read anything about body cracks from frame tie in? I have not. Frame tie in was one of the driving factors for picking the one I did.


Sent from my iPhone using Tapatalk

Check back in 3 years  //cheers2//

Haha, will do


Sent from my iPhone using Tapatalk
Jay
2011 JKU

"Sometimes you have to go home now, in order to go big later" - someone that understands life