BECOME A CORE MEMBER HERE

Author Topic: Stock 2017 Rubicon Recon Drive Shafts/Yokes/Flanges  (Read 1002 times)

Offline FlyinDuck998

  • Visitor
  • Posts: 78
  • KARMA : +0/-0
Stock 2017 Rubicon Recon Drive Shafts/Yokes/Flanges
« on: May 02, 2018, 06:30:25 PM »
I've got front and rear drive shafts. Includes flanges, yokes, u-joint, and hardware.

Taken off at 7K (with in the last week).

Make an offer or lets discuss a trade.

Located in Dawsonville, Ga.

 //cheers2//

Offline FlyinDuck998

  • Visitor
  • Posts: 78
  • KARMA : +0/-0
Re: Stock 2017 Rubicon Recon Drive Shafts/Yokes/Flanges
« Reply #1 on: May 02, 2018, 06:38:40 PM »



Sent from my iPhone using Tapatalk Pro

Online Big Dave

  • C.O.R.E MEMBER
  • *
  • Posts: 5573
  • KARMA : +26/-56
Re: Stock 2017 Rubicon Recon Drive Shafts/Yokes/Flanges
« Reply #2 on: May 02, 2018, 07:16:58 PM »
What are your plans in case you ruin one?

Offline FlyinDuck998

  • Visitor
  • Posts: 78
  • KARMA : +0/-0
Re: Stock 2017 Rubicon Recon Drive Shafts/Yokes/Flanges
« Reply #3 on: May 02, 2018, 07:41:40 PM »
What are your plans in case you ruin one?

We are running a 3.5” RK lift and I put Tom Woods drive shafts under our rig. So I can’t really use these. At least I thought.

Educate me if I’m wrong. Still new to this sport.


Sent from my iPhone using Tapatalk Pro

Online Big Dave

  • C.O.R.E MEMBER
  • *
  • Posts: 5573
  • KARMA : +26/-56
Re: Stock 2017 Rubicon Recon Drive Shafts/Yokes/Flanges
« Reply #4 on: May 02, 2018, 07:49:52 PM »
Never had a JK but I'm guessing you could use the stock shaft to get you back home.
Right?

Offline cru9

  • Nautical Wizard
  • Visitor
  • Posts: 8749
  • KARMA : +56/-76
Re: Stock 2017 Rubicon Recon Drive Shafts/Yokes/Flanges
« Reply #5 on: May 02, 2018, 07:51:32 PM »
Once you change to an aftermarket shaft on a JK the stock ones are no good unless you changed the yoke/Flange


Sent from my iPhone using Tapatalk
Bobby

Offline FlyinDuck998

  • Visitor
  • Posts: 78
  • KARMA : +0/-0
Stock 2017 Rubicon Recon Drive Shafts/Yokes/Flanges
« Reply #6 on: May 02, 2018, 07:56:57 PM »
Never had a JK but I'm guessing you could use the stock shaft to get you back home.
Right?

We changed from flanges to yokes all the way around. So in order to swap back we would have to swap out yokes and install flanges again.


Sent from my iPhone using Tapatalk Pro
« Last Edit: May 02, 2018, 07:58:03 PM by FlyinDuck998 »

Offline FlyinDuck998

  • Visitor
  • Posts: 78
  • KARMA : +0/-0
Re: Stock 2017 Rubicon Recon Drive Shafts/Yokes/Flanges
« Reply #7 on: May 02, 2018, 07:59:09 PM »
Once you change to an aftermarket shaft on a JK the stock ones are no good unless you changed the yoke/Flange


Sent from my iPhone using Tapatalk

Exactly. Though I’d hate for good parts to go to waste if someone might be able to use them.


Sent from my iPhone using Tapatalk Pro

Online Big Dave

  • C.O.R.E MEMBER
  • *
  • Posts: 5573
  • KARMA : +26/-56
Re: Stock 2017 Rubicon Recon Drive Shafts/Yokes/Flanges
« Reply #8 on: May 02, 2018, 08:35:19 PM »
#educated

Offline filco

  • Visitor
  • Posts: 50
  • KARMA : +0/-0
Re: Stock 2017 Rubicon Recon Drive Shafts/Yokes/Flanges
« Reply #9 on: May 02, 2018, 08:44:29 PM »
I’d be interested in the front one, but I believe stock jk driveshafts have multiple different lengths depending on what model, year, options you have. I have a 2010 2 dr rubi.


Sent from my iPhone using Tapatalk

Offline FlyinDuck998

  • Visitor
  • Posts: 78
  • KARMA : +0/-0
Re: Stock 2017 Rubicon Recon Drive Shafts/Yokes/Flanges
« Reply #10 on: May 02, 2018, 09:15:05 PM »
@filco the front shaft is 34 5/8 compressed and 39 3/4 extended as much as I felt comfortable to do.

This is with out the flanges attached on each end. Just the front shaft measurement.

Hope this helps.
« Last Edit: May 02, 2018, 09:20:41 PM by FlyinDuck998 »

 



BECOME A CORE MEMBER HERE

CHECK OUT OUR CLUB WEBSITE

JOIN US ON FACEBOOK

JOIN US ON INSTAGRAM