CLASSIFIEDS > Interior

TJ/LJ Harness Bar

(1/3) > >>

TravisMac:
Anyone need a TJ/LJ Harness bar? Bought it without thinking about the difference in diameter for the stock cage & PSC cage. Let's say $100 if you come pick it up
https://www.northridge4x4.com/part/harness-bars/rh1004-rock-hard-4x4-straight-harness-bar-bare-metal

tjsahara00:
Good luck Travis. I hadn't been able to sell mine either.

TravisMac:

--- Quote from: tjsahara00 on January 10, 2019, 07:27:47 PM ---Good luck Travis. I hadn't been able to sell mine either.

--- End quote ---

I figured worst case scenario I’ll just cut some tube and weld it to the inside of the clamps to reduce it down to fit the PSC cage

tcdawg:

--- Quote from: TravisMac on January 10, 2019, 08:37:53 PM ---
--- Quote from: tjsahara00 on January 10, 2019, 07:27:47 PM ---Good luck Travis. I hadn't been able to sell mine either.

--- End quote ---

I figured worst case scenario I’ll just cut some tube and weld it to the inside of the clamps to reduce it down to fit the PSC cage

--- End quote ---

PSC cage doesn’t come w a harness bar?

tjsahara00:
I could measure mine and let you know what size it is?

Navigation

[0] Message Index

[#] Next page