MAY 24TH - 26TH : HALE OHV PARK : DISCUSSION

[TravisMac]

Made some good progress today! Getting pumped for the ride!




Sent from my iPhone using Tapatalk

I see two major items remaining.

Sent from my SM-G960U using Tapatalk

I'm more worried about personally not having any Submarine Belts... am I supposed to?
If so, I may have been doing this wrong this whole time....

I actually couldn’t use mine without dropping the transfer case so they’re on hold for now. Four points should be fine


Sent from my iPhone using Tapatalk

5pt is where it's at... if you have the provisions for the sub belt, 100% run it

I’d love to - I just don’t see a way to get a bolt through the tub without dropping the transfer case. I thought about running a bar from the seat mounting points across and bolting to that but doesn’t seem like it would be strong enough. I’ll eventually have to either drop the case or weld a plate to the floor with the bolt already through

[tcdawg]

Made some good progress today! Getting pumped for the ride!




Sent from my iPhone using Tapatalk

I see two major items remaining.

Sent from my SM-G960U using Tapatalk

I'm more worried about personally not having any Submarine Belts... am I supposed to?
If so, I may have been doing this wrong this whole time....

I actually couldn’t use mine without dropping the transfer case so they’re on hold for now. Four points should be fine


Sent from my iPhone using Tapatalk

5pt is where it's at... if you have the provisions for the sub belt, 100% run it

I’d love to - I just don’t see a way to get a bolt through the tub without dropping the transfer case. I thought about running a bar from the seat mounting points across and bolting to that but doesn’t seem like it would be strong enough. I’ll eventually have to either drop the case or weld a plate to the floor with the bolt already through

Pull the seat and weld a tab on the tub. Bolt the sub belt to the tab.

Edit for a pic. This is angle iron that I cut and drilled.  It’s on the raised section of the tub

[TravisMac]

Made some good progress today! Getting pumped for the ride!




Sent from my iPhone using Tapatalk

I see two major items remaining.

Sent from my SM-G960U using Tapatalk

I'm more worried about personally not having any Submarine Belts... am I supposed to?
If so, I may have been doing this wrong this whole time....

I actually couldn’t use mine without dropping the transfer case so they’re on hold for now. Four points should be fine


Sent from my iPhone using Tapatalk

5pt is where it's at... if you have the provisions for the sub belt, 100% run it

I’d love to - I just don’t see a way to get a bolt through the tub without dropping the transfer case. I thought about running a bar from the seat mounting points across and bolting to that but doesn’t seem like it would be strong enough. I’ll eventually have to either drop the case or weld a plate to the floor with the bolt already through

Pull the seat and weld a tab on the tub. Bolt the sub belt to the tab.

Edit for a pic. This is angle iron that I cut and drilled.  It’s on the raised section of the tub

Good idea. Thanks for the pic!


Sent from my iPhone using Tapatalk

[tcdawg]

Made some good progress today! Getting pumped for the ride!




Sent from my iPhone using Tapatalk

I see two major items remaining.

Sent from my SM-G960U using Tapatalk

I'm more worried about personally not having any Submarine Belts... am I supposed to?
If so, I may have been doing this wrong this whole time....

I actually couldn’t use mine without dropping the transfer case so they’re on hold for now. Four points should be fine


Sent from my iPhone using Tapatalk

5pt is where it's at... if you have the provisions for the sub belt, 100% run it

I’d love to - I just don’t see a way to get a bolt through the tub without dropping the transfer case. I thought about running a bar from the seat mounting points across and bolting to that but doesn’t seem like it would be strong enough. I’ll eventually have to either drop the case or weld a plate to the floor with the bolt already through

Pull the seat and weld a tab on the tub. Bolt the sub belt to the tab.

Edit for a pic. This is angle iron that I cut and drilled.  It’s on the raised section of the tub

Good idea. Thanks for the pic!


Sent from my iPhone using Tapatalk

Ghetto Fab Productions...patent pending

 

[j3ff3ry_j33p]

Made some good progress today! Getting pumped for the ride!




Sent from my iPhone using Tapatalk

I see two major items remaining.

Sent from my SM-G960U using Tapatalk

I'm more worried about personally not having any Submarine Belts... am I supposed to?
If so, I may have been doing this wrong this whole time....

I actually couldn’t use mine without dropping the transfer case so they’re on hold for now. Four points should be fine


Sent from my iPhone using Tapatalk

5pt is where it's at... if you have the provisions for the sub belt, 100% run it

I’d love to - I just don’t see a way to get a bolt through the tub without dropping the transfer case. I thought about running a bar from the seat mounting points across and bolting to that but doesn’t seem like it would be strong enough. I’ll eventually have to either drop the case or weld a plate to the floor with the bolt already through

Pull the seat and weld a tab on the tub. Bolt the sub belt to the tab.

Edit for a pic. This is angle iron that I cut and drilled.  It’s on the raised section of the tub

Good idea. Thanks for the pic!


Sent from my iPhone using Tapatalk

Ghetto Fab Productions...patent pending

It's pretty awesome.

[8lugLJ]

@TravisMac you can also go to the seat frame itself, just find a mount in the center and drill it. easy peasy.

[TravisMac]

@TravisMac you can also go to the seat frame itself, just find a mount in the center and drill it. easy peasy.

I can get to the seat frame easily - I just wasn’t sure if it was strong enough. That will probably be my temporary solution until I can copy Tony


Sent from my iPhone using Tapatalk

[8lugLJ]

@TravisMac you can also go to the seat frame itself, just find a mount in the center and drill it. easy peasy.

I can get to the seat frame easily - I just wasn’t sure if it was strong enough. That will probably be my temporary solution until I can copy Tony


Sent from my iPhone using Tapatalk

if the seat frame isnt stout enough you have bigger problems lol

[tj05world]

Decent weather at night for camping.

Stupid baseball game.

Yeah, but those highs are high!  I'll be taking a shower of some sort (whore's bath???)  before hitting the sack...maybe.  I hope it's overcast.

You can come to my hotel room for a bath.

Hmm...that's too nice of you, like seriously, way too nice.  I think I'll stay at camp since I don't trust you.

I am wondering what happened that last night at Rausch...wasn't it Pat that stayed with you?

Sent from my SM-G960U using Tapatalk

hahaha


Sent from my iPhone using Tapatalk

[kvom]

Booked a hotel in Huntsville for Friday night.  Looking forward to the ride.

[tcdawg]

Booked a hotel in Huntsville for Friday night.  Looking forward to the ride.

Is your starter fixed?

And whatever other issue you were having?

[kvom]

Tim diagnosed it and fixed the issue.  Nothing to do with the starter; something electrical.