CLASSIFIEDS > Drivetrain

FREE- Dana 60 high steer arm

(1/1)

Scott F.:
This is for a kingpin 60.  Single arm for attaching the drag link to the passenger side knuckle.  I used this when I had hydro assist steering. I had the tie rod on heims on top of the factory knuckle spots with a the assist ram going from the axle tube to the tie rod.  The bolt size is 5/8” for running a 5/8” x 3/4” heim on the drag link. It is angled to counteract the angle of the top of the knuckle.

Free

Navigation

[0] Message Index