SHOP TALK > Wrench Day
Coilover Install
TravisMac:
I’m traveling for work next week but you’re welcome to borrow my nitrogen setup. I’m not far from the Home Depot on 92
tcdawg:
--- Quote from: 8lugLJ on December 14, 2022, 04:15:02 PM ---
--- Quote from: Trailabite on December 14, 2022, 03:57:34 PM ---I should be receiving my coilovers and bump stops, hopefully, next week. Anyone in the Roswell area familiar installing these and has a bottle of nitrogen and can help set them up? I will provide beer and pizza.
--- End quote ---
All you really need is nitrogen and a gauge setup that goes past 200psi
and jacks, and a lift, and 8 hands to hold spacers, and lots of patience. And beers. lots of beers.
--- End quote ---
I do love those spacers.
Jduck:
Goatbilt has this tool that makes it much easier to install 2.0 shocks. https://goatbuilt.com/product/shock-spacer-install-tool/
Or buy 2.5 shocks and not worry about it since the spacers slide into the shock eyes
Trailabite:
--- Quote from: Jduck on December 14, 2022, 09:52:09 PM ---Goatbilt has this tool that makes it much easier to install 2.0 shocks. https://goatbuilt.com/product/shock-spacer-install-tool/
Or buy 2.5 shocks and not worry about it since the spacers slide into the shock eyes
--- End quote ---
They are 2.5. Also, these are not new ones. I took them off and had them rebuilt by Wizzo. So I have all the hardware to put them back on.
Sent from my SM-S901U using Tapatalk
Raisinhead:
Let me know when it’s going down and I’ll let you know if I can swing by
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version