CLASSIFIEDS > Suspension & Steering

Psc steering pumps

(1/3) > >>

Jduck:
I have a couple steering pumps I’m not going to use.  1 is a hi flow TC pump $150, the other is cbr race pump with external pressure regulator $275 for the pump/regulator.  Pulleys are for a jeep 4.0.  Both pumps have -12 feed and -8 pressure fittings, in good working condition just going with a higher flowing pump.  Both of these will work well with an orbital under 200mL.

Cbr setup sold

tcdawg:
Is the bolt pattern totally different on the TC pump vs the Pump?

I have wanted to swap from my current P pump out

tcdawg:

--- Quote from: tcdawg on September 17, 2023, 02:27:29 PM ---Is the bolt pattern totally different on the TC pump vs the Pump?

I have wanted to swap from my current P pump out

--- End quote ---
Nevermind.  I see now that my goatbuilt accessory bracket is specifically for the P pump. 

Mortalis5509:

--- Quote from: tcdawg on September 17, 2023, 02:30:18 PM ---
--- Quote from: tcdawg on September 17, 2023, 02:27:29 PM ---Is the bolt pattern totally different on the TC pump vs the Pump?

I have wanted to swap from my current P pump out

--- End quote ---
Nevermind.  I see now that my goatbuilt accessory bracket is specifically for the P pump. 

--- End quote ---
CBR and TC will mount on the same bracket. It's the difference of the spacers being in the front or the back. P pump only works for p as you stated.

Raisinhead:
I’ll take the CBR pump

Navigation

[0] Message Index

[#] Next page

Go to full version