Took the jeep for a little trip

[06trailrig]

can I get a link this company's website?  ;D...but seriously, what'd you do? I missed it i guess

Check the projects section and look for his build and you'll see it

[Alex]

When i pushed the axle back 3 inches, i didnt move the spring perch.  It is at a very extreme angle haha.  I will more than likly loss a coil or to on the trail next weekend.

[Will]

When i pushed the axle back 3 inches, i didnt move the spring perch.  It is at a very extreme angle haha.  I will more than likly loss a coil or to on the trail next weekend.

You mean the frame perch? 

[Jimmy]

I will more than likly loss a coil or to on the trail next weekend.

Hopefully I don't fall in a mud pit this time!

[Alex]

HAHA i forgot about that.  We have to go on that trail first...what day and time are yall getting there on Friday?  Anyone have an extra sleeping bag?

[lt99ls1]

Looks good.

[Matt]

So, do you have an estimate that it cost you for the long arms.

[Krawler00]

Hope you don't pop the spring out all day! That thing must be seriously out of whack!!

[Alex]

Matt i would say

130 for 24 feet of 2x2x.250 wall square tubing

i already had the joints but they run $35 each so 7 of them.

Re sleeve bushings.  6 of them for $8 each.

Already had 6 stock lower control arm bushings so free.

My and a friend made all the brackets for $80.  Can all be bought for under 200 easily.

So it can be done under $500 if you can come up with a design yourself it is easy.  I just studied everyone's suspension and went from there.

[Sasquatch]

I can get you that 2 x 2 x 1/4 x 24 for $110.

If you can use 3/16 I can get it for $85.

Also I can cut it to length for you, just give me sizes.  I can do that free of charge. 

Give me a a couple days notice and I can have it ready.  Anything under 10' I'll put in the back of my truck.  Just would need to know where to meet you after that.

[Will]

I can get you that 2 x 2 x 1/4 x 24 for $110.

If you can use 3/16 I can get it for $85.

Also I can cut it to length for you, just give me sizes.  I can do that free of charge. 

Give me a a couple days notice and I can have it ready.  Anything under 10' I'll put in the back of my truck.  Just would need to know where to meet you after that.

holy crap, you really are our new best friend! 

[Matt]

I can get you that 2 x 2 x 1/4 x 24 for $110.

If you can use 3/16 I can get it for $85.

Also I can cut it to length for you, just give me sizes.  I can do that free of charge. 

Give me a a couple days notice and I can have it ready.  Anything under 10' I'll put in the back of my truck.  Just would need to know where to meet you after that.

We will be talking soon