Author Topic: Random Pictures...Yours Only! (Read 5101 times)

Will · « **Reply #84 on:** October 16, 2008, 11:33:13 PM »

Mike has a point, he came down a long time ago for bumper measurements

Mike I talked to him about that for the longest time and it never got to the top of his priorities with all the other stuff he has going on there. If I remember correctly he wants to charge you around $1000 for whatever you told him you wanted then, but he shouldn't have a problem with me using the tools and making it for you. I hope you haven't held anything against me all this time

I had you thinking you were getting a bumper $:-\$

Wait a second... dude aren't you related to somebody in the steel business? Bring that crap down and let's make you a bumper!

RotorHead · « **Reply #85 on:** October 16, 2008, 11:50:58 PM »

Quote from: Will on October 16, 2008, 11:33:13 PM

Mike has a point, he came down a long time ago for bumper measurements

Mike I talked to him about that for the longest time and it never got to the top of his priorities with all the other stuff he has going on there. If I remember correctly he wants to charge you around $1000 for whatever you told him you wanted then, but he shouldn't have a problem with me using the tools and making it for you. I hope you haven't held anything against me all this time I had you thinking you were getting a bumper $:-\$

Wait a second... dude aren't you related to somebody in the steel business? Bring that crap down and let's make you a bumper!

I can get the steel, and no I didn't hold anything against you. It's not like I just have an extra grand laying around with nothing to spend it on. {toast}

ghostdancer308 · « **Reply #86 on:** October 17, 2008, 05:46:09 AM »

If you guys are serious, I would like to have a cage for the JK built. I can leave it with you guys. Experimental JK is cool with me!!

urdaddyjeep · « **Reply #87 on:** October 17, 2008, 08:43:58 AM »

hahaha me tooo with an exo-skeleton as well

Krawler00 · « **Reply #88 on:** October 17, 2008, 09:13:35 AM »

Will, make the date! {toast}

ghostdancer308 · « **Reply #89 on:** October 17, 2008, 12:46:02 PM »

Mike-
Your gonna look mighty funny road-marching to work with 60lbs. on your back!

You might get that 2 miler in under 13mins.HAHAhahhaha

Will · « **Reply #90 on:** October 17, 2008, 01:54:09 PM »

Quote from: Krawler00 on October 17, 2008, 09:13:35 AM

Will, make the date! {toast}

Let me talk to my cousin about it. It would be around Christmas. Don't count on it. He may not have any space for us, but I'll do what I can.

Eventually I'll have my own shop and you guys can hang out and bum my tools whenever you want {toast}

DOUG · « **Reply #91 on:** October 17, 2008, 03:30:38 PM »

Now there's a good use for a group fund project, a good GATR tube bender.

Blue Flame ProFormer II Digital Exhaust Pipe Bender - $3500 (Atlanta, GA)

TJBrad04 · « **Reply #92 on:** October 17, 2008, 07:42:40 PM »

on to the pics as promised....

Beep Beep!!!

Six Piston Mono Block Calipers that fit inside a 15" steel wheel. Baer made them just for this project instead of us using the Alcon brakes..... seems like a good upgrade for the jeeps!!!

I'm sure you could fit a few golf clubs in there

Factory door panels, except the window cranks rachet so you can roll down the window while belted in.

Factory Headliner

A-Pillars are fully welded to the cage

These keep your feet out of the cage in case of emergency

Auto Meter Colbalt Gauges, they match the Petty Blue paint

Dash plaque for us and Bill Goldberg who initiated the project in the first place

Rated at about 800hp on PUMP GAS, but we run C16 in it anyways. This is a 08' Cup engine donated from Evernham Motorsports. They pretty much built one of their cup engines to run on pump gas along with a tranny..... engine tranny package is valued at $105,000.00. The porting job on the manifold and amazing and the block has enough iron in it so that the surface shines like it's painted, roller cam bearings, yada yada yada. Headers built my Mark McDonald and it has single chamber flowmasters to keep it "reasonable" :bs)