BECOME A CORE MEMBER HERE

Author Topic: Jeep 4.0 engine and 2.5in exhaust with goodies!!  (Read 1380 times)

Offline Huntingman2706217

  • Visitor
  • Posts: 439
  • KARMA : +0/-0
  • Project Frugal II
    • My build
Jeep 4.0 engine and 2.5in exhaust with goodies!!
« on: April 08, 2010, 03:58:17 PM »
its a 96 HO motor with a 99+intake manifold and ford 5.0 injectors... its currently in my 89 XJ and has been converted and rewired to run in a Renix model XJ... all the parts go with it to make this happen if you choose... drove and ran great! still does... i just pulled the tranny so cant start it anymore unless we can figure something out with the starter and hook my exhaust back up... doing a motor swap so just dont need it... $500 get everything... and more

exhaust i just had put on like 2 months ago.... i was still able to take the nuts off the U bolts with my fingers its so new... 2.5in pipe with a spun (small so no clearance issue) high flow converter and single chamber muffler... $250 and i paid more then that for the pipe and install...

678-588-6661
95 2 door I6, 2006 F250 axles... 5.38's and welded F&R... custom Y linked front... leafs (for now) in the rear... H1 double beadlocks and rock rings with 40's

Build Page:
www.cherokeeforum.com/f46/frugal-ii-poor-mans-story-73061/

Offline DILYSI Dave

  • Visitor
  • Posts: 453
  • KARMA : +1/-1
Re: Jeep 4.0 engine and 2.5in exhaust with goodies!!
« Reply #1 on: April 09, 2010, 09:38:24 AM »
Mileage? 

Leaks?

Offline Huntingman2706217

  • Visitor
  • Posts: 439
  • KARMA : +0/-0
  • Project Frugal II
    • My build
Re: Jeep 4.0 engine and 2.5in exhaust with goodies!!
« Reply #2 on: April 09, 2010, 07:32:28 PM »
no leaks... milage is unknown to be honest... it was installed when i got the jeep already and the buy paid someone else to do it and never knew... but its runs out fine and never has had any leak so i dont think its that many...
95 2 door I6, 2006 F250 axles... 5.38's and welded F&R... custom Y linked front... leafs (for now) in the rear... H1 double beadlocks and rock rings with 40's

Build Page:
www.cherokeeforum.com/f46/frugal-ii-poor-mans-story-73061/

Offline DILYSI Dave

  • Visitor
  • Posts: 453
  • KARMA : +1/-1
Re: Jeep 4.0 engine and 2.5in exhaust with goodies!!
« Reply #3 on: April 09, 2010, 10:32:09 PM »
Well now I know you're lying, because ALL jeeps leak.  :)

Offline tjl1388

  • Visitor
  • Posts: 96
  • KARMA : +0/-0
Re: Jeep 4.0 engine and 2.5in exhaust with goodies!!
« Reply #4 on: April 09, 2010, 10:46:47 PM »
Well now I know you're lying, because ALL jeeps leak.  :)


I had some tire work done at a local shop and they called me freaking out that my Jeep leaked like a sieve... {popcorn}

My response..  "Yup it does...that's how I know it has oil in it...just fix the friggin tire." 
Just another grocery getter with some lockers....
It is all about the U

Offline Huntingman2706217

  • Visitor
  • Posts: 439
  • KARMA : +0/-0
  • Project Frugal II
    • My build
Re: Jeep 4.0 engine and 2.5in exhaust with goodies!!
« Reply #5 on: April 09, 2010, 11:07:00 PM »
nope... doesnt leave a drop in the driveway... ill be finishing pulling the tranny tomorrow and ill double double check!! lol... leak or seep? lol... no leak... maybe alittle seepage... lol
95 2 door I6, 2006 F250 axles... 5.38's and welded F&R... custom Y linked front... leafs (for now) in the rear... H1 double beadlocks and rock rings with 40's

Build Page:
www.cherokeeforum.com/f46/frugal-ii-poor-mans-story-73061/

Offline Huntingman2706217

  • Visitor
  • Posts: 439
  • KARMA : +0/-0
  • Project Frugal II
    • My build
Re: Jeep 4.0 engine and 2.5in exhaust with goodies!!
« Reply #6 on: April 11, 2010, 09:11:09 AM »
finished pulling the tranny yesterday... does have alittle seepage from the rear main and alittle around the oil filter mount... but thats it... the rest of the motors dry... cant really tell if its the oil pan or the RMS... but either way theres nothin to them when the motors already out... i started pulling it yesterday...
95 2 door I6, 2006 F250 axles... 5.38's and welded F&R... custom Y linked front... leafs (for now) in the rear... H1 double beadlocks and rock rings with 40's

Build Page:
www.cherokeeforum.com/f46/frugal-ii-poor-mans-story-73061/

 



BECOME A CORE MEMBER HERE

CHECK OUT OUR CLUB WEBSITE

JOIN US ON FACEBOOK

JOIN US ON INSTAGRAM