NP231 - 23 SPLINE from 03 Wrangler - SOLD

[Matt]

As the title states. This transfer case is out of a 03 wrangler with 4.0l & 5 speed. Approx 100k on it. I have opened it up and everything looks good on the inside. I bought it to take the SYE off and install on my 21 spline case, which  I did.

SOLD

[rabunjeeper]

Will this fit a 94 cherokee wih a aw4? My bros is bad.

[Matt]

I was thinking the AW4 is 21 spline. Can anyone confirm or deny?

[Do Work 93 YJ]

Will this fit a 94 cherokee wih a aw4? My bros is bad.

Is it closed cooling system ,coolent bottle on fire wall, or open meaning radiator cap up front?

[mdo817]

'94 should be 23 spline ( I think), I was thinking all the AW4's behind the HO motors were 23 spline, but I'm still learning this XJ stuff.

[rabunjeeper]

Will this fit a 94 cherokee wih a aw4? My bros is bad.

Is it closed cooling system ,coolent bottle on fire wall, or open meaning radiator cap up front?

I dont know if it matters but it has a cap on the radiator.  {ehm}

[ranger11]

Thats when they changed to the h.o engine

[Do Work 93 YJ]

Will this fit a 94 cherokee wih a aw4? My bros is bad.

Is it closed cooling system ,coolent bottle on fire wall, or open meaning radiator cap up front?

I dont know if it matters but it has a cap on the radiator.  {ehm}

Then it should be 23 spline.

[rabunjeeper]

Will this fit a 94 cherokee wih a aw4? My bros is bad.

Is it closed cooling system ,coolent bottle on fire wall, or open meaning radiator cap up front?

I dont know if it matters but it has a cap on the radiator.  {ehm}

Then it should be 23 spline.

Ok thanks. ill see if he will buy it.  {toast}

[rabunjeeper]

He said he will take it. Not this saturday but next saturday the 7th he has to go Atl for bike show and he said he will come by and pick it p then. I'll pm you when it gets closer to then. Thanks!  {toast}

[rabunjeeper]

Oh, one more question. You did put the stock output shaft back in it didnt you?

[Matt]

It is apart at the moment, but yes it has the stock output shaft, it will be back together before he picks it up, unless he wants me to leave it open so he can check it out or is installing an SYE. It only takes about 10 minutes to assemble. Let me know.