CLASSIFIEDS > Barter

Adjustable Track Bar

(1/1)

CopperCrawler:
Since I know a lot of you guys are lowering your Jeeps for the LCOG, maybe one of you would be interested in a Track Bar trade.

I have a Superlift adjustable trackbar designed for lifts between 2" and 4".  Looking for an adjustable trackbar for 4" - 6" lift so i can re-center my front axle.

Thanks,
Chuck

tjsahara00:
You could drill the hole 3/4'' over and be done with it.
Thats what Justin at OffRoad Outfitters told me to do.
I did it and haven't had any problems.

CopperCrawler:

--- Quote from: tjsahara00 on August 23, 2011, 04:14:45 PM ---You could drill the hole 3/4'' over and be done with it.
Thats what Justin at OffRoad Outfitters told me to do.
I did it and haven't had any problems.

--- End quote ---

The PO already drilled the hole, but didn't drill it straight, so now if you use the hole he drilled you can't get the trackbar to fully tighten. 

I have a HP D30 I am getting ready to swap in.  When I do the swap, if no one wants to trade for the 2" - 4" adj Trackbar that I have, I will probably drill the HP D30.

tjsahara00:
Yea I could see that. I made sure I went through straight...

Navigation

[0] Message Index