BECOME A CORE MEMBER HERE

Author Topic: Morning Coffee  (Read 156821 times)

Offline tcdawg

  • Anthony Smooth
  • GATR STAFF
  • *
  • Posts: 13890
  • KARMA : +85/-84
Re: Morning Coffee
« Reply #3552 on: September 17, 2018, 07:42:59 PM »
That's a very cool "truck ".
Easy conversion. 1/2 cab top & rear door fillers. Is that it?

i think; it has a goofy "sport cage" that is more appearance, from what I have seen. But, yeah; it is a molded line thing. I would build/have built an actual cage that looked like that but had a halo over top. This is long term but pretty conf change. I am lookin at a CL welder at moment tryin to bring guy down.
 this kit aint cheap ; might be cheaper than the possible damage that a newb fabricator like me tryin to do this to his JKU as a first big project burnin metal (It'd take me a bit to save this -nearly rediculous https://dv8offroad.com/collections/jk-conversions/products/hammertruck-conversion -kinda bread-up.
There is a cool JKT conversion goin on on jkowners ...guy is converting to a truck & is good with his MIG

Check out this guys JKU conversion. I follow him on Instagram and he has been through a few changes on that Jeep. He is selling it now incase you just want a turn key one ton jeep.

https://www.facebook.com/BlackWidowJK/posts/1787269988020589?__tn__=K-R

That is a hack job of a build. 

Offline TravisMac

  • C.O.R.E MEMBER
  • *
  • Posts: 3148
  • KARMA : +4/-3
Re: Morning Coffee
« Reply #3553 on: September 18, 2018, 08:44:37 AM »
That's a very cool "truck ".
Easy conversion. 1/2 cab top & rear door fillers. Is that it?

i think; it has a goofy "sport cage" that is more appearance, from what I have seen. But, yeah; it is a molded line thing. I would build/have built an actual cage that looked like that but had a halo over top. This is long term but pretty conf change. I am lookin at a CL welder at moment tryin to bring guy down.
 this kit aint cheap ; might be cheaper than the possible damage that a newb fabricator like me tryin to do this to his JKU as a first big project burnin metal (It'd take me a bit to save this -nearly rediculous https://dv8offroad.com/collections/jk-conversions/products/hammertruck-conversion -kinda bread-up.
There is a cool JKT conversion goin on on jkowners ...guy is converting to a truck & is good with his MIG

Check out this guys JKU conversion. I follow him on Instagram and he has been through a few changes on that Jeep. He is selling it now incase you just want a turn key one ton jeep.

https://www.facebook.com/BlackWidowJK/posts/1787269988020589?__tn__=K-R

That is a hack job of a build.

Are there any cluster lights he DOESN'T have on?
Travis Macdonald
Crossthreading is nature's locktite

Offline 8lugLJ

  • C.O.R.E MEMBER
  • *
  • Posts: 3842
  • KARMA : +27/-55
  • Dont go away mad, just go away.
Re: Morning Coffee
« Reply #3554 on: September 18, 2018, 11:18:53 AM »
That's a very cool "truck ".
Easy conversion. 1/2 cab top & rear door fillers. Is that it?

i think; it has a goofy "sport cage" that is more appearance, from what I have seen. But, yeah; it is a molded line thing. I would build/have built an actual cage that looked like that but had a halo over top. This is long term but pretty conf change. I am lookin at a CL welder at moment tryin to bring guy down.
 this kit aint cheap ; might be cheaper than the possible damage that a newb fabricator like me tryin to do this to his JKU as a first big project burnin metal (It'd take me a bit to save this -nearly rediculous https://dv8offroad.com/collections/jk-conversions/products/hammertruck-conversion -kinda bread-up.
There is a cool JKT conversion goin on on jkowners ...guy is converting to a truck & is good with his MIG

Check out this guys JKU conversion. I follow him on Instagram and he has been through a few changes on that Jeep. He is selling it now incase you just want a turn key one ton jeep.

https://www.facebook.com/BlackWidowJK/posts/1787269988020589?__tn__=K-R

That is a hack job of a build.

Are there any cluster lights he DOESN'T have on?

i thought that was a just a JK thing?
"The ones that matter dont mind and the ones that mind dont matter" -- Dr Seuss

"He's a man with an LJ. And thats all that really matters." -- JC79

Offline patman

  • C.O.R.E MEMBER
  • *
  • Posts: 6608
  • KARMA : +39/-69
Re: Morning Coffee
« Reply #3555 on: September 18, 2018, 11:22:55 AM »
That's a very cool "truck ".
Easy conversion. 1/2 cab top & rear door fillers. Is that it?

i think; it has a goofy "sport cage" that is more appearance, from what I have seen. But, yeah; it is a molded line thing. I would build/have built an actual cage that looked like that but had a halo over top. This is long term but pretty conf change. I am lookin at a CL welder at moment tryin to bring guy down.
 this kit aint cheap ; might be cheaper than the possible damage that a newb fabricator like me tryin to do this to his JKU as a first big project burnin metal (It'd take me a bit to save this -nearly rediculous https://dv8offroad.com/collections/jk-conversions/products/hammertruck-conversion -kinda bread-up.
There is a cool JKT conversion goin on on jkowners ...guy is converting to a truck & is good with his MIG

Check out this guys JKU conversion. I follow him on Instagram and he has been through a few changes on that Jeep. He is selling it now incase you just want a turn key one ton jeep.

https://www.facebook.com/BlackWidowJK/posts/1787269988020589?__tn__=K-R

That is a hack job of a build.

Are there any cluster lights he DOESN'T have on?

i thought that was a just a JK thing?

Warning lights are for sissies.

Offline TravisMac

  • C.O.R.E MEMBER
  • *
  • Posts: 3148
  • KARMA : +4/-3
Re: Morning Coffee
« Reply #3556 on: September 18, 2018, 11:24:09 AM »
That's a very cool "truck ".
Easy conversion. 1/2 cab top & rear door fillers. Is that it?

i think; it has a goofy "sport cage" that is more appearance, from what I have seen. But, yeah; it is a molded line thing. I would build/have built an actual cage that looked like that but had a halo over top. This is long term but pretty conf change. I am lookin at a CL welder at moment tryin to bring guy down.
 this kit aint cheap ; might be cheaper than the possible damage that a newb fabricator like me tryin to do this to his JKU as a first big project burnin metal (It'd take me a bit to save this -nearly rediculous https://dv8offroad.com/collections/jk-conversions/products/hammertruck-conversion -kinda bread-up.
There is a cool JKT conversion goin on on jkowners ...guy is converting to a truck & is good with his MIG

Check out this guys JKU conversion. I follow him on Instagram and he has been through a few changes on that Jeep. He is selling it now incase you just want a turn key one ton jeep.

https://www.facebook.com/BlackWidowJK/posts/1787269988020589?__tn__=K-R

That is a hack job of a build.

Are there any cluster lights he DOESN'T have on?

i thought that was a just a JK thing?

It’s like he doesn’t have any black tape


Sent from my iPhone using Tapatalk
Travis Macdonald
Crossthreading is nature's locktite

Offline tjsahara00

  • GATR STAFF
  • *
  • Posts: 7721
  • KARMA : +52/-44
  • Staying on the porch now days!
Re: Morning Coffee
« Reply #3557 on: September 18, 2018, 11:48:34 AM »
 lmao....that's what covers mine
Kevin Pool
2016 JKU Sport
2000 TJ Sahara (RIP)

Offline BigPrince

  • Visitor
  • Posts: 1650
  • KARMA : +54/-122
Re: Morning Coffee
« Reply #3558 on: September 18, 2018, 11:51:32 AM »
Thats what half assing an axle swap and seat swap look like

Online Anvilsam

  • Rowdy
  • Visitor
  • Posts: 2729
  • KARMA : +119/-1582
Re: Morning Coffee
« Reply #3559 on: September 18, 2018, 12:38:23 PM »
Thats what half assing an axle swap and seat swap look like
Or a #kustom hemi swap. Fml


Sent from my iPhone using Tapatalk

Offline 8lugLJ

  • C.O.R.E MEMBER
  • *
  • Posts: 3842
  • KARMA : +27/-55
  • Dont go away mad, just go away.
Re: Morning Coffee
« Reply #3560 on: September 18, 2018, 04:08:24 PM »
Thats what half assing an axle swap and seat swap look like
Or a #kustom hemi swap. Fml


Sent from my iPhone using Tapatalk

dont kid, we all know your dash dont even light up anymore
"The ones that matter dont mind and the ones that mind dont matter" -- Dr Seuss

"He's a man with an LJ. And thats all that really matters." -- JC79

Online Anvilsam

  • Rowdy
  • Visitor
  • Posts: 2729
  • KARMA : +119/-1582
Re: Morning Coffee
« Reply #3561 on: September 18, 2018, 04:10:47 PM »
Thats what half assing an axle swap and seat swap look like
Or a #kustom hemi swap. Fml


Sent from my iPhone using Tapatalk

dont kid, we all know your dash dont even light up anymore

ok im done. I will be back when its running.

Offline patman

  • C.O.R.E MEMBER
  • *
  • Posts: 6608
  • KARMA : +39/-69
Re: Morning Coffee
« Reply #3562 on: September 18, 2018, 04:19:29 PM »
Thats what half assing an axle swap and seat swap look like
Or a #kustom hemi swap. Fml


Sent from my iPhone using Tapatalk

dont kid, we all know your dash dont even light up anymore

ok im done. I will be back when its running.

It was nice knowing you

Offline j3ff3ry_j33p

  • Visitor
  • Posts: 1392
  • KARMA : +3/-3
Re: Morning Coffee
« Reply #3563 on: September 18, 2018, 04:23:26 PM »
That's a very cool "truck ".
Easy conversion. 1/2 cab top & rear door fillers. Is that it?

i think; it has a goofy "sport cage" that is more appearance, from what I have seen. But, yeah; it is a molded line thing. I would build/have built an actual cage that looked like that but had a halo over top. This is long term but pretty conf change. I am lookin at a CL welder at moment tryin to bring guy down.
 this kit aint cheap ; might be cheaper than the possible damage that a newb fabricator like me tryin to do this to his JKU as a first big project burnin metal (It'd take me a bit to save this -nearly rediculous https://dv8offroad.com/collections/jk-conversions/products/hammertruck-conversion -kinda bread-up.
There is a cool JKT conversion goin on on jkowners ...guy is converting to a truck & is good with his MIG

Check out this guys JKU conversion. I follow him on Instagram and he has been through a few changes on that Jeep. He is selling it now incase you just want a turn key one ton jeep.

https://www.facebook.com/BlackWidowJK/posts/1787269988020589?__tn__=K-R

That is a hack job of a build.

Are there any cluster lights he DOESN'T have on?

I know, right?
I actually do not think that it's really 111 degrees Fahrenheit wherever he took the image; I think that's the freakin Jeep throwin it's hand-up in the air ,givin'-up ... [embarrassed]
Jeffery
ºlllllllº '11 JKUs
▀lllllll▀ '95 XJ

 



BECOME A CORE MEMBER HERE

CHECK OUT OUR CLUB WEBSITE

JOIN US ON FACEBOOK

JOIN US ON INSTAGRAM