Georgia Trail Riders Forum

CLASSIFIEDS => Wanted => Topic started by: DOUG on September 04, 2008, 04:32:00 PM

Title: Wanted: Dana 30 and 35 3.73 or 4.11 gears
Post by: DOUG on September 04, 2008, 04:32:00 PM: I am looking for a matched set of TJ axles, Dana 30 and 35 with factory 3.73 or 4.11 gearing, that you have removed from your TJ when installing those 44's or 60's. I prefer a rear with Limited Slip and disc brakes, but PM me with what you have. Thanks!
Title: Re: Wanted: Dana 30 and 35 3.73 or 4.11 gears
Post by: Krawler00 on September 04, 2008, 08:49:40 PM: I'll trade for 60's or 44's. ;)
Title: Re: Wanted: Dana 30 and 35 3.73 or 4.11 gears
Post by: Matt on September 04, 2008, 09:39:03 PM: $1500 for the pair of mine....4.11s
Title: Re: Wanted: Dana 30 and 35 3.73 or 4.11 gears
Post by: DOUG on September 04, 2008, 09:52:22 PM: Quote from: Matt on September 04, 2008, 09:39:03 PM
$1500 for the pair of mine....4.11s

I want them, but the target is $500 since there are lots of them collecting dust. Thanks Matt.
Title: Re: Wanted: Dana 30 and 35 3.73 or 4.11 gears
Post by: Matt on September 04, 2008, 10:08:20 PM: did I mention Lock Right.... ;)
Title: Re: Wanted: Dana 30 and 35 3.73 or 4.11 gears
Post by: DOUG on September 04, 2008, 10:17:55 PM: Quote from: Matt on September 04, 2008, 10:08:20 PM
did I mention Lock Right.... ;)

No need in this one, this is for daily driver comfort, 3.08's are too tall!
Title: Re: Wanted: Dana 30 and 35 3.73 or 4.11 gears
Post by: 06trailrig on September 04, 2008, 10:51:52 PM: Here ya go Doug

http://www.southernjeeps.org/phpbb/viewtopic.php?t=27887
Title: Re: Wanted: Dana 30 and 35 3.73 or 4.11 gears
Post by: DOUG on September 05, 2008, 07:35:59 AM: Quote from: 06trailrig on September 04, 2008, 10:51:52 PM
Here ya go Doug

http://www.southernjeeps.org/phpbb/viewtopic.php?t=27887

That's an XJ, my ad asked for TJ, keep looking!
Title: Re: Wanted: Dana 30 and 35 3.73 or 4.11 gears
Post by: Krawler00 on September 05, 2008, 11:21:05 AM: It'll work.
Title: Re: Wanted: Dana 30 and 35 3.73 or 4.11 gears
Post by: DOUG on September 05, 2008, 02:00:37 PM: Quote from: Krawler00 on September 05, 2008, 11:21:05 AM
It'll work.

Both axles are bolt in?
Title: Re: Wanted: Dana 30 and 35 3.73 or 4.11 gears
Post by: Chris Hyde on September 05, 2008, 02:51:29 PM: No. XJ is leaf sprung in the rear.
Title: Re: Wanted: Dana 30 and 35 3.73 or 4.11 gears
Post by: Krawler00 on September 05, 2008, 03:14:56 PM: Brackets.
Title: Re: Wanted: Dana 30 and 35 3.73 or 4.11 gears
Post by: DOUG on September 05, 2008, 03:17:18 PM: Looking for TJ bolt in, should be lots laying around.
Title: Re: Wanted: Dana 30 and 35 3.73 or 4.11 gears
Post by: Chris Hyde on September 05, 2008, 03:21:08 PM: Umm, don't you live like 30 seconds from Pull-A-Part where these axles are $80 each? ???
Title: Re: Wanted: Dana 30 and 35 3.73 or 4.11 gears
Post by: Krawler00 on September 05, 2008, 03:23:24 PM: I check the website from time to time and it seems like they never have any XJ. TJ stuff.