Georgia Trail Riders Forum
MEMBERS DISCUSSION AREA => General Discussion => Topic started by: Cannonballkev on September 14, 2020, 08:02:51 PM
-
Looking to go this route soon. Inexpensive, but safe?
Whatcha got?
-
I'm looking to do the same but after I fix the overheating issue.
A guy at work has one in his XJ.
The adapter was $90 & the steering wheel is free or $$$.
I'll ask him the next time I see him the exact model number.
It was off of Ebay.
-
Looking to go this route soon. Inexpensive, but safe?
Whatcha got?
I used an nrg. You can see it a few pages back on my build page (I think around October of last year)
-
No suede and nothing cheap from eBay. Those wheels will bend super easy. Suede gets destroyed fast by dirt and oils in your hands.
NRG makes the best quality hubs/quick releases I’ve seen. Zero play/slop. A ball bearing QR is better than a hex that welds on to the steering shaft
-
No suede and nothing cheap from eBay. Those wheels will bend super easy. Suede gets destroyed fast by dirt and oils in your hands.
NRG makes the best quality hubs/quick releases I’ve seen. Zero play/slop. A ball bearing QR is better than a hex that welds on to the steering shaft
I have the hex and he is exactly right. The weld on part is steel and the QR is aluminum. It make them want to stick. I wish i had spent a little extra and got the ball bearing type.
-
All good info, thanks
-
More fitting for an XJ
(https://uploads.tapatalk-cdn.com/20200915/8b82810297e2ce5faaca18aec724d971.jpg)
-
More fitting for an XJ
(https://uploads.tapatalk-cdn.com/20200915/8b82810297e2ce5faaca18aec724d971.jpg)
Dave, you gonna let him get away with that? I drive a ZJ, or I would help you out
-
More fitting for an XJ
(https://uploads.tapatalk-cdn.com/20200915/8b82810297e2ce5faaca18aec724d971.jpg)
Dave, you gonna let him get away with that? I drive a ZJ, or I would help you out
I was actually thinking of going that route.
Weld a steering wheel to the vise grips.
Done
-
More fitting for an XJ
(https://uploads.tapatalk-cdn.com/20200915/8b82810297e2ce5faaca18aec724d971.jpg)
Dave, you gonna let him get away with that? I drive a ZJ, or I would help you out
I was actually thinking of going that route.
Weld a steering wheel to the vise grips.
Done
Do it!
Sent from my SM-G960U using Tapatalk