Georgia Trail Riders Forum
CLASSIFIEDS => Drivetrain => Topic started by: Scott F. on November 20, 2020, 09:41:02 PM
-
This is for a kingpin 60. Single arm for attaching the drag link to the passenger side knuckle. I used this when I had hydro assist steering. I had the tie rod on heims on top of the factory knuckle spots with a the assist ram going from the axle tube to the tie rod. The bolt size is 5/8” for running a 5/8” x 3/4” heim on the drag link. It is angled to counteract the angle of the top of the knuckle.
Free