Georgia Trail Riders Forum

CLASSIFIEDS => Barter => Topic started by: CopperCrawler on August 23, 2011, 12:02:22 PM

Title: Adjustable Track Bar
Post by: CopperCrawler on August 23, 2011, 12:02:22 PM

Since I know a lot of you guys are lowering your Jeeps for the LCOG, maybe one of you would be interested in a Track Bar trade.

I have a Superlift adjustable trackbar designed for lifts between 2" and 4".  Looking for an adjustable trackbar for 4" - 6" lift so i can re-center my front axle.

Thanks,
Chuck

Title: Re: Adjustable Track Bar
Post by: tjsahara00 on August 23, 2011, 04:14:45 PM

You could drill the hole 3/4'' over and be done with it.
Thats what Justin at OffRoad Outfitters told me to do.
I did it and haven't had any problems.

Title: Re: Adjustable Track Bar
Post by: CopperCrawler on August 23, 2011, 04:20:52 PM

Quote from: tjsahara00 on August 23, 2011, 04:14:45 PM

You could drill the hole 3/4'' over and be done with it.
Thats what Justin at OffRoad Outfitters told me to do.
I did it and haven't had any problems.

The PO already drilled the hole, but didn't drill it straight, so now if you use the hole he drilled you can't get the trackbar to fully tighten. 

I have a HP D30 I am getting ready to swap in.  When I do the swap, if no one wants to trade for the 2" - 4" adj Trackbar that I have, I will probably drill the HP D30.

Title: Re: Adjustable Track Bar
Post by: tjsahara00 on August 23, 2011, 04:28:50 PM

Yea I could see that. I made sure I went through straight...