Georgia Trail Riders Forum

CLASSIFIEDS => Drivetrain => Topic started by: vonschlick on March 30, 2016, 08:18:17 AM

Title: Wanted..4.0 Jeep cylinder head
Post by: vonschlick on March 30, 2016, 08:18:17 AM

looking for a 2000 and newer 4.0 cylinder head..pm me

Title: Re: Wanted..4.0 Jeep cylinder head
Post by: 94xjsport94 on March 30, 2016, 09:09:07 AM

What casting number?

Title: Re: Wanted..4.0 Jeep cylinder head
Post by: vonschlick on March 31, 2016, 07:36:07 AM

0331 if its not cracked....or 312

Title: Re: Wanted..4.0 Jeep cylinder head
Post by: 94xjsport94 on March 31, 2016, 04:41:16 PM

Was going to say I have some older ones from 98-99's if you just want to plug the sender in the back of the head.

Title: Re: Wanted..4.0 Jeep cylinder head
Post by: Big Dave on March 31, 2016, 07:18:14 PM

And not worry that it will crack.

Title: Re: Wanted..4.0 Jeep cylinder head
Post by: 94xjsport94 on March 31, 2016, 08:56:44 PM

..!.. :D ..!..

Title: Re: Wanted..4.0 Jeep cylinder head
Post by: vonschlick on April 04, 2016, 04:36:33 PM

thanks for the reply, ill keep you in mind when i need an early style head.. un fortunately it wonk work on this on, needs coil rail mounting pedestals and ports are different.. thanks again

Title: Re: Wanted..4.0 Jeep cylinder head
Post by: 94xjsport94 on April 04, 2016, 05:32:08 PM

You can use a 0630 head just fine. Same dowel alignment pins. Just need a matching exhaust manifold and to build tabs off the valve cover studs. Got one that has like 130k on it and a different one that was rebuilt, put on, and the bottom end went out on on start up so 0 miles. Also have a exhaust manifold but it's cracked and needs to be weldered up.

(http://uploads.tapatalk-cdn.com/20160404/cbf28d0e3b65d421f4083edd2cf9c13e.jpg)
(http://uploads.tapatalk-cdn.com/20160404/611862fa035ed6d6b7044636bc64df76.jpg)

Title: Re: Wanted..4.0 Jeep cylinder head
Post by: 94xjsport94 on April 04, 2016, 05:37:27 PM

Also assuming it's not a California emissions with 14 cats on it.