Georgia Trail Riders Forum
CLASSIFIEDS => Interior => Topic started by: TravisMac on January 10, 2019, 02:14:51 PM
-
Anyone need a TJ/LJ Harness bar? Bought it without thinking about the difference in diameter for the stock cage & PSC cage. Let's say $100 if you come pick it up
https://www.northridge4x4.com/part/harness-bars/rh1004-rock-hard-4x4-straight-harness-bar-bare-metal
(https://images.northridge4x4.com/image/private/s--y78kfgO0--/f_auto,t_auto_product_nr/v1459275397/product_images/rkhrh1004_1)
-
Good luck Travis. I hadn't been able to sell mine either.
-
Good luck Travis. I hadn't been able to sell mine either.
I figured worst case scenario I’ll just cut some tube and weld it to the inside of the clamps to reduce it down to fit the PSC cage
-
Good luck Travis. I hadn't been able to sell mine either.
I figured worst case scenario I’ll just cut some tube and weld it to the inside of the clamps to reduce it down to fit the PSC cage
PSC cage doesn’t come w a harness bar?
-
I could measure mine and let you know what size it is?
-
Good luck Travis. I hadn't been able to sell mine either.
I figured worst case scenario I’ll just cut some tube and weld it to the inside of the clamps to reduce it down to fit the PSC cage
PSC cage doesn’t come w a harness bar?
It’s a weld in. I wanted adjustable/removable
Sent from my iPhone using Tapatalk
-
Looks like mine tightens down to 2 1/4 " across the inside
-
Looks like mine tightens down to 2 1/4 " across the inside
Yeah mine too. Cage is 1.75 so I’m trying to find a piece of 0.25” wall 2.25” OD
-
Ok gotcha....
-
I'm interested in the rear harness bar! PM me if it's still available.
Thanks,
Keith
-
You first Travis...your thread.
If Travis doesn't have his still....I have one
-
I'm interested in the rear harness bar! PM me if it's still available.
Thanks,
Keith
Hey Keith - I found some 1/4" wall DOM so I have a solution for mine. @tjsahara00 has one though!
-
Thanks for the reply. TJSahara PM'ed me so thanks for the reference!