Georgia Trail Riders Forum
CLASSIFIEDS => Drivetrain => Topic started by: vonschlick on March 30, 2016, 08:18:17 AM
-
looking for a 2000 and newer 4.0 cylinder head..pm me
-
What casting number?
-
0331 if its not cracked....or 312
-
Was going to say I have some older ones from 98-99's if you just want to plug the sender in the back of the head.
-
And not worry that it will crack.
-
..!.. :D ..!..
-
thanks for the reply, ill keep you in mind when i need an early style head.. un fortunately it wonk work on this on, needs coil rail mounting pedestals and ports are different.. thanks again
-
You can use a 0630 head just fine. Same dowel alignment pins. Just need a matching exhaust manifold and to build tabs off the valve cover studs. Got one that has like 130k on it and a different one that was rebuilt, put on, and the bottom end went out on on start up so 0 miles. Also have a exhaust manifold but it's cracked and needs to be weldered up.
(http://uploads.tapatalk-cdn.com/20160404/cbf28d0e3b65d421f4083edd2cf9c13e.jpg)
(http://uploads.tapatalk-cdn.com/20160404/611862fa035ed6d6b7044636bc64df76.jpg)
-
Also assuming it's not a California emissions with 14 cats on it.