Georgia Trail Riders Forum
MEMBERS DISCUSSION AREA => General Discussion => Topic started by: Alex on March 25, 2008, 11:32:46 PM
-
Well after saying it for a long time i have decided to start buying the parts. I am going to three link the front and triangulate the rear uppers and push it back maybe an inch or two. I sold my canyons, 2 bf at's and i have 2 guys coming to look at my soft doors this week so i will be ordering parts hopefully this week. I am getting all brackets from Ballistic Fabrication. And because i am poor the front arms will be made out of 2x2x.250 wall square tubing and the rear uppers will be made out of 1.5x1.5x.125 square tubing. I will actually try and do a little writeup as i go along so i will be updating as the stuff starts.
-
Take lots of pics.
-
schweet! And square tube is cooler anyway.
-
Take lots of pics.
X2