Georgia Trail Riders Forum

CLASSIFIEDS => Wanted => Topic started by: BigPrince on April 04, 2017, 05:05:59 PM

Title: JKU Soft top bracket
Post by: BigPrince on April 04, 2017, 05:05:59 PM
................
Title: Re: JKU Soft top bracket
Post by: DOUG on April 04, 2017, 05:30:10 PM
Try Bestop direct?  Jeep Junkyard?

Sent from my Pixel XL using Tapatalk

Title: Re: JKU Soft top bracket
Post by: Anvilsam on April 04, 2017, 05:55:31 PM
We can probably tap the holes out. You may have mentioned that but that's a lot to read


Sent from my iPhone using Tapatalk
Title: Re: JKU Soft top bracket
Post by: DOUG on April 04, 2017, 06:09:45 PM
Bestop is the mfr of all oem soft tops so their cs might be able to help.

Edit i see the part you need that the arms connect to and in the newer models it hangs onto the brackets you bought
Title: Re: JKU Soft top bracket
Post by: Jango on April 04, 2017, 11:40:39 PM
Would a 2012 one work? probably gonna throw my original soft top away because its covered in red clay stains and rattles a ton and has a small hole. So would this part just unbolt? I can just give it to you at the Morris ride in may or mail it you on your dime if you think this could work.
Title: Re: JKU Soft top bracket
Post by: Blue J on April 05, 2017, 08:41:30 AM
I had the same issue with part number 11 pictured above where the nut would just spin. I popped it out and ran a new bolt through...my previous fix before that was 3 zip ties.
Title: Re: JKU Soft top bracket
Post by: 8lugLJ on April 05, 2017, 11:04:07 AM
Try Bestop direct?  Jeep Junkyard?

Sent from my Pixel XL using Tapatalk



Hoped to find a part number I can order before trying PAP.

I have an OEM soft top.

@BigPrince shoot me a PM with the VIN, i can run it and get you a part # if it is OEM
Title: Re: JKU Soft top bracket
Post by: 8lugLJ on April 06, 2017, 02:54:18 PM
Try Bestop direct?  Jeep Junkyard?

Sent from my Pixel XL using Tapatalk



Hoped to find a part number I can order before trying PAP.

I have an OEM soft top.

@BigPrince shoot me a PM with the VIN, i can run it and get you a part # if it is OEM

sent you a pm .. can probly have it overnight and bring it to Hale... correction 2 days out.