Georgia Trail Riders Forum

CLASSIFIEDS => Drivetrain => Topic started by: FishWagon on June 01, 2011, 09:16:25 AM

Title: BBC Cutler EFI system, with Haltech controller
Post by: FishWagon on June 01, 2011, 09:16:25 AM

I have a BBC Cutler EFI system. 1000 cfm throttle body, I have the intake (square port), fuel rails, throttle body, all wiring, etc....
It will need injectors as it does not have any.
ECM is a Haltech F9. I do not have the software (lost it) but Haltech will send you free of charge.

$800 (obo) + the ride, will take partial/full trades on man items, mig welder, International Scout stuff. Could really use a Scout D300 with auto bullgear, hydro assist/full hydro, 8 lug beadlocks (16.5 and above), 40" + tires, whatever...

I'm in Dacula, GA

(http://www.petersenfamily.net/Cutler BBC 1000 CFM EFI intake Throttle body.jpg)

Title: Re: BBC Cutler EFI system, with Haltech controller
Post by: FishWagon on June 05, 2011, 11:18:09 PM

Realized I was overpriced due to no injectors, so I'm lowering down to $800. That's a good deal since you get the Haltech controller with it.

Title: Re: BBC Cutler EFI system, with Haltech controller
Post by: FishWagon on June 23, 2011, 08:09:21 PM

Sold!!