Georgia Trail Riders Forum
CLASSIFIEDS => Wanted => Topic started by: rabunjeeper on June 02, 2010, 05:19:54 PM
-
Im looking for a set of 16x10 wheels for a 8 lug, can't be for 99 up ford. Chevy or Dodge pattern will fit. Wagon spokes, Rock Crawlers, Chrome, Aluminum, It don't matter as long as they are cheap.
-
;D if it were a ford i would have you covered for a set, for real cheap, come and get them and they are yours cheap
-
;D if it were a ford i would have you covered for a set, for real cheap, come and get them and they are yours cheap
Ford will work as long as it is under a 99 model.
-
I have no clue what year model they belong 2, how do i check?
-
I need 8 on 6.5 pattern and 99 newer is 8 on 170.
-
I have no clue what year model they belong 2, how do i check?
Easiest thing for you to do would be to go measure you're dad's and then measure the spares, if they're the same you're good. Or I'll be in town tomorrow evening, I can swing by and measure them.
-
They are "supposed" to fit the 7.3...... But i dont know for sure.
A guy gave them to me about a week ago so he didnt have to look at them,
i dont need them because all im gonna do is look at them.
But its a 95 model so i'll check tomm on lunch or somthing to see if they fit and if they do they are all yours
-
:-[ Tried the rims on our 95 7.3L they dont fit. Looks like they are the 8 on 170.
Sorry, i tried, it would have been better for the both of us if they would have fitten.
-
Thanks for checkin, I do appreciate it. Ill find some, I aint in no hurry. Ive had the truck for 19 yrs, lol!
-
I found out the other day that my old chevy 8 luggers won't fit the 79 ford D-60 rear axle. Darn hub opening is too small. I was gonnna roll the axle over to the XJ so I could get it installed. Bolt pattern is acceptable, but that does me no good, lol.
-
I found out the other day that my old chevy 8 luggers won't fit the 79 ford D-60 rear axle. Darn hub opening is too small. I was gonnna roll the axle over to the XJ so I could get it installed. Bolt pattern is acceptable, but that does me no good, lol.
Got a dremel tool? Open that sucker up.
-
I found out the other day that my old chevy 8 luggers won't fit the 79 ford D-60 rear axle. Darn hub opening is too small. I was gonnna roll the axle over to the XJ so I could get it installed. Bolt pattern is acceptable, but that does me no good, lol.
Got a dremel tool? Open that sucker up.
or a plasma will do the trick {hihi}
-
I doubt he needs to take that much off.
-
Hell... I only wish I had a plasma cutter, LOL... maybe 1/16 ish of an inch. I do, however, have a dremel tool... might be worth a shot. They're only stock steel wheels.. good for rolling around the shop.
-
well, thats all i had to do to mine was use a dremel, but i was short on time and the plasma did the trick, steady hands man, steady! {hihi}
-
LOL. .. I guess so. My neighbor is trying to get on with Airgas, and he would have access to the goodies, but well have to wait and see if that works out.
-
You could adapt a metric bolt circle to 8x6.5 by drilling 8 additional holes.
I actually did that for my Jeep's spare adapting a 5x5.5 steel wheel to 8x6.5, so now it will fit either pattern.