Georgia Trail Riders Forum
CLASSIFIEDS => Drivetrain => Topic started by: biscuit88 on May 02, 2018, 10:14:10 AM
-
Front Dana 44 from a 1977 Early Bronco. WHEELS AND TIRES HAVE ALREADY BEEN SOLD!!!!
3.55 Richmond gears, hardened Yukon axles, Eaton Electric locker, heavy duty diff cover, Warn hubs, flat top knuckles with one high steer arm for cross over steering, Chevy brake caliper setup, heavy duty drag link, heavy duty tie rod with hiems, panhard bar with hiems, and tabs for hydraulic ram assist.
Rear Ford 9 Inch from a 1977 early Bronco.
3.55 Richmond gears, Strange nodular 3rd member, Strange full spool, and 35 spline hardened Yukon axles.
Both axles have the spring perches welded at the width for a CJ7 frame. The only upgrade that I haven't done is rear disk brakes only because the drums worked and I never wore them out.
Price $2000 nego.
Axles located in Powder Springs, Ga.
cell number 678-618-4663 text is the best way to reach me.
-
Bump for a great deal.
-
bump over patman.
-
bump over patman.
Dammit man. I need my sale...
-
Still for sale. Make offer.
-
Do you know the wms to wms?
-
Do you know the wms to wms?
@TravisMac sorry it took me so long to get this for you. I have been traveling a lot for work. The WMS should be around 58" for the front and the rear. I will put a tape measure on it to make sure and let you know.
-
Do you know the wms to wms?
@TravisMac sorry it took me so long to get this for you. I have been traveling a lot for work. The WMS should be around 58" for the front and the rear. I will put a tape measure on it to make sure and let you know.
No worries. I think I’m going to go another direction anyways so no need to measure for me
Sent from my iPhone using Tapatalk