Georgia Trail Riders Forum
CLASSIFIEDS => Drivetrain => Topic started by: BlueJew on January 03, 2019, 06:11:11 PM
-
I have a set of Dynatrac D44 and D60 axles. I bought these to put under my TJ but something else came up and I no longer need These. Here is a basic listing of specs and I have the full build sheet for them. The gears were replaced (4:56 - 5:13 after the axles were purchased in 2014). These are in great shape and ready to drop in your TJ or JK. They can handle up to 39-40" tires with no issue. No leaks and very low mileage on the set (less than 1k is my estimate). These were originally owned by John and then by Clark. Short runs on each rig and I have had no runtime on them.
Width - 68.5" (full JK width but mounting is for TJ)
Front - 30 spline RCV - ARB Air Locker and 5:13 Gears - Uses stock TJ knuckles which are not included
Rear - 35 spline chromo semi-float - ARB 5:13 Gears - Trussed and ready for 4 link
TJ wheels bolt right up as the bolt pattern is 5x4.5
$5,000 GATR Price.
-
Wes. I'm interested. Will contact you tomorrow.
Sent from my SM-G965U using Tapatalk
-
And ALLSOUTH did the re-gear with Yukon gears. Those axles served me and Clark well. Will be awesome to keep them in the family.
-
Killer deal
-
damn what a deal
-
Man this is a great deal. Hope your doing well @Jeepson33s
-
SOLD
-
Those went FAST
-
Man this is a great deal. Hope your doing well @Jeepson33s
Same. I assumed when he said "but something else came up and I no longer need These" he meant "I am buying someone's UD60s and no longer need these"?
-
Man this is a great deal. Hope your doing well @Jeepson33s
Same. I assumed when he said "but something else came up and I no longer need These" he meant "I am buying someone's UD60s and no longer need these"?
I heard he sold the blue beast and was getting a JKUR for the family.
-
Man this is a great deal. Hope your doing well @Jeepson33s
Same. I assumed when he said "but something else came up and I no longer need These" he meant "I am buying someone's UD60s and no longer need these"?
I heard he sold the blue beast and was getting a JKUR for the family.
Nobody sells a TJ for a JKUR around here...
-
Man this is a great deal. Hope your doing well @Jeepson33s
Same. I assumed when he said "but something else came up and I no longer need These" he meant "I am buying someone's UD60s and no longer need these"?
I heard he sold the blue beast and was getting a JKUR for the family.
Nobody sells a TJ for a JKUR around here...
Thatll be the next trend once all these jku guys figure out they are too soft for a tj/Lj.
-
Thatll be the next trend once all these jku guys figure out they are too soft for a tj/Lj.
hahahaha
-
Man this is a great deal. Hope your doing well @Jeepson33s
Same. I assumed when he said "but something else came up and I no longer need These" he meant "I am buying someone's UD60s and no longer need these"?
I heard he sold the blue beast and was getting a JKUR for the family.
Nobody sells a TJ for a JKUR around here...
I did in 2011
-
At least you came back into the fold.
-
Stop jack'n my, err Wes's thread!
Sent from my SM-G965U using Tapatalk
-
Stop jack'n my, err Wes's thread!
Sent from my SM-G965U using Tapatalk
Solid upgrade. What tires do you plan on running?
-
Bigger swampers please!
-
Bigger swampers please!
^^ Those axles are good for at least 43's!
-
Bigger swampers please!
^^ Those axles are good for at least 43's!
A D44?
-
Bigger swampers please!
^^ Those axles are good for at least 43's!
A D44?
Just piling on to Jay's comment and trying to tempt Mark into going big with the Swampers... lol
-
Bigger swampers please!
^^ Those axles are good for at least 43's!
A D44?
Just piling on to Jay's comment and trying to tempt Mark into going big with the Swampers... lol
They do make TSL SXIIs in 42x15/17....
-
And it’s a built 44 on a pretty light Jeep.
-
And it’s a built 44 on a pretty light Jeep.
Good points. No reason to go less than 42 swamper... it would basically be irresponsible.
-
Y'all are funny! Honestly not sure what tires will be next. While I was working on a plan for a front axle upgrade this kind of came out of the blue. It will likely be a 37 for a while. Anything bigger will require a lot of rework at the rear of the Jeep.
With that said I have been wheeling 36's fairly hard on a locked 30 for 3 years without issue. So there's that! lmao
(probably going to regret saying that last part out loud)
-
...
With that said I have been wheeling 36's fairly hard on a locked 30 for 3 years without issue. So there's that! ...
Amen to that ,brother . All that being said , nice upgrades! Someday I hope to acquire similar axles. I doubt I'll find 'em for that price,tho' ...
-
@Michigunman since these are the Dynatrac high clearance housings, you are going to have good forums clearance with 37s.
-
Y'all are funny! Honestly not sure what tires will be next. While I was working on a plan for a front axle upgrade this kind of came out of the blue. It will likely be a 37 for a while. Anything bigger will require a lot of rework at the rear of the Jeep.
With that said I have been wheeling 36's fairly hard on a locked 30 for 3 years without issue. So there's that! lmao
(probably going to regret saying that last part out loud)
For sure Mark. I still remember that day you and I were doing 56 or one of the trails in the right side on AOP that is no joke and it was dry and we had a great run that day.
-
Bigger swampers please!
^^ Those axles are good for at least 43's!
A D44?
Just piling on to Jay's comment and trying to tempt Mark into going big with the Swampers... lol
They do make TSL SXIIs in 42x15/17....
have you seen them in stock?? tell me where if so, i could not find them when i finished mine, thats what i wanted to run.
-
@Michigunman since these are the Dynatrac high clearance housings, you are going to have good forums clearance with 37s.
Good to hear, this is my hope. @Scott F.
-
Stock wheels and your current tires for the street, pick up some 37 stickies and your current beadlocks for the trail!
-
Y'all are funny! Honestly not sure what tires will be next. While I was working on a plan for a front axle upgrade this kind of came out of the blue. It will likely be a 37 for a while. Anything bigger will require a lot of rework at the rear of the Jeep.
With that said I have been wheeling 36's fairly hard on a locked 30 for 3 years without issue. So there's that! lmao
(probably going to regret saying that last part out loud)
For sure Mark. I still remember that day you and I were doing 56 or one of the trails in the right side on AOP that is no joke and it was dry and we had a great run that day.
I think it was 43, but yeah what a blast.
-
Stock wheels and your current tires for the street, pick up some 37 stickies and your current beadlocks for the trail!
Sounds like a plan!
-
...
With that said I have been wheeling 36's fairly hard on a locked 30 for 3 years without issue. So there's that! ...
Amen to that ,brother . All that being said , nice upgrades! Someday I hope to acquire similar axles. I doubt I'll find 'em for that price,tho' ...
Good to hear. This gives me some hope for my 30.
-
David when are you wheeling next?
-
David when are you wheeling next?
Looks like CFR.