1.25" spacers 5 on 5

[Krawler00]

Aluminum spacers, 1.25" 5 on 5 bolt pattern JK, Chevy. $75 for the pair. Used for about 20 miles and removed. Swapped wheels and don't need.

Off Grid Post

[Krawler00]

NOBODY? Man, with all the JK guys I figured this would be gone by now. BUMP

[Raisinhead]

Good luck with sale. I've already got a set that I still need to install

Sent from my SAMSUNG-SGH-I537 using Tapatalk

[gint2]

Not to rain on the parade but you may want to check, the JK requires Hubcentric spacers and those do not look to be. Then again, I may be wrong.

[Krawler00]

Nope. They are hub centric or so Jeremy told me when I bought them jeepforum is next.

Off Grid Post

[gint2]

Ok...I didn't see a shoulder on them but it could be the glare.  //cheers2//

[Krawler00]

Well after looking at some Google pics I may be wrong. Does it have to have the lip to be HC?

Off Grid Post

[gint2]

Yes, that is what centers it on the hub, the way yours are uses the lugs to center it.

Non hub centric can cause a wobble on a rig that requires HC

[Krawler00]

Hmmmm. Well, guess I will try some Chevy sites. None of my Fronts were hub centric then. Maybe why I had an issue on the why????

Off Grid Post

[BlueJew]

I "think" hub centric has the lip on the hub hole and that is what lines up the rim.  Peep the spidertrax spacers for the tj and you will see it.

[clark123456]

...
Maybe why I had an issue on the why????

Off Grid Post

That makes sense, to me.  A good lesson that everyone could learn from.

[Krawler00]

Well, I still have the old spacer from "the incident" and it does not have a lip. Could that have really caused the wheel to come off? If so, I was sold the wrong spacers. Need to dig a little on this as I still wonder what the hell happened that day. //popcorn//