Georgia Trail Riders Forum
MEMBERS DISCUSSION AREA => General Discussion => Topic started by: Jimmy on May 19, 2008, 07:47:28 PM
-
I figured with a new craigslist find getting posted every few days one thread for everyone to post CL finds in would make it easier.
Anyway, here's mine for the day:
2 week old Smittybuilt 8k winch w/ TJ winch plate $350. Bet you could talk him down since you can get them new for less.
http://augusta.craigslist.org/pts/685489241.html
-
WHAT?!! NO PICS! :D Pics help sell em!!!
-
Here are some Cherokee parts that I can pick up for anybody.
http://atlanta.craigslist.org/pts/672109924.html
-
Anybody want to buy a parts ZJ for $500? I asked the guy about the rear axle and he wants almost as much as what he would be selling the Jeep for.
http://atlanta.craigslist.org/pts/658117386.html
-
Anybody want to buy a parts ZJ for $500? I asked the guy about the rear axle and he wants almost as much as what he would be selling the Jeep for.
http://atlanta.craigslist.org/pts/658117386.html
Attention Matt: Ditch the 4 banger and go v8 ;D
Haha, you should do it Matt.
But seriously, I would love to buy it and part it out but I have no where to put it and I'm going back up to Tennessee for summer classes. If someone wanted to buy it, I would split the cost with them if I can just get that rear axle.
-
http://atlanta.craigslist.org/pts/642328766.html (http://atlanta.craigslist.org/pts/642328766.html)
JK rear bumper, no tire carrier
-
Hey Ben, you still looking for a rear end?
http://www.southernjeeps.org/phpbb/viewtopic.php?t=26653
-
Hey Ben, you still looking for a rear end?
http://www.southernjeeps.org/phpbb/viewtopic.php?t=26653
http://www.gatrailriders.com/GTRForums/index.php?topic=227.0 :P
oh.... right..... :D Nice job Ben! I don't know how I missed that. ::)
-
Too much drinky drinky this summer? ;D
-
Yep, already got one and for the same price as that one but I didn't have to drive to Augusta to get it.
-
Too much drinky drinky this summer? ;D
Maybe a little.... ::) ha
Hey, are you in Augusta or Macon for the summer?
-
Too much drinky drinky this summer? ;D
Maybe a little.... ::) ha
Hey, are you in Augusta or Macon for the summer?
Macon. Coming to Milledgeville anytime?
-
Too much drinky drinky this summer? ;D
Maybe a little.... ::) ha
Hey, are you in Augusta or Macon for the summer?
Macon. Coming to Milledgeville anytime?
Yeah, I was supposed to go back and ride Memorial Day weekend, but... yeah I didn't make it. I'll probably go in a few weeks, party at my buddy's place and maybe ride on a saturday at RIver Rock or something. No promises though. :D it costs a good bit to get over there. Hopefully we'll have a GATR ride there in the next few months.... ::)
-
I saw that someone on JF reserved 4th of July weekend at River Rock...you should come that weekend.
-
{btt}http://atlanta.craigslist.org/pts/696967143.html
-
{btt}
http://atlanta.craigslist.org/pts/696967143.html
Try again.
-
I saw that someone on JF reserved 4th of July weekend at River Rock...you should come that weekend.
US Jeeps and Pirate 4x4.... I'll see if I can make it over :)
-
http://atlanta.craigslist.org/pts/695320353.html
http://atlanta.craigslist.org/pts/695015358.html
-
good deal on tires
http://atlanta.craigslist.org/pts/698523292.html
-
Aweome deal on a dedicated trail rig, or driver :o...
http://atlanta.craigslist.org/pts/699113022.html
-
Aweome deal on a dedicated trail rig, or driver :o...
http://atlanta.craigslist.org/pts/699113022.html
$800! Now that's a price I could take a saw and a grinder to, and never shed a tear! There's a buggy in there somewhere.
-
Dang skippy!
-
Dang skippy!
Nice Avatar, where?
Who is skippy?
-
That would be Helicopter at Tellico. Skippy, he's my buddy! Dang him.
-
That would be Helicopter at Tellico. Skippy, he's my buddy! Dang him.
LMAO! :D Doug, please tell me you've heard that before :) ....
-
Will, don;t embarrass the man! :D
-
Will, don;t embarrass the man! :D
All that says is we're more redneck. WE should be embarrassed ! :D
-
http://atlanta.craigslist.org/pts/703985822.html
-
http://atlanta.craigslist.org/pts/705209506.html good spares.
http://atlanta.craigslist.org/pts/705155751.html Motor
http://atlanta.craigslist.org/pts/705105020.html spare wheels, tires
http://atlanta.craigslist.org/pts/704811025.html Locker
http://atlanta.craigslist.org/pts/704508893.html spare axle
http://atlanta.craigslist.org/pts/704499904.html built 35
http://atlanta.craigslist.org/pts/704497987.html tires and wheels
-
Good finds guys!
-
Could u guys PLZ keep a lookout for tires 33' OR 35' either anything 400$ or under with at least 60% tread.. email me at tomstanding@charter.net!! thank you so much it would mean alot to me..
-J33pLover / Tom
-
how many tires? Might be a little hard to find 5 tires with atleast 60% tread for under $400. What size wheel also?
sorry I am a craigslist junky, just must links get posted before I can
-
33' 4 o f them
-
33' 4 o f them
Maybe I can sell you 4 315/75/R16 Pro Comp Xterrains with 25k miles and 1 spair with 0 miles on it for about that amount... I would include wheels for a little more but they are 5x5 bolt so probably wouldn't work for you.
-
Maybe idk
-
Not Craigslist but a sweet site for cheap stuff.
http://www.govliquidation.com/index.html
-
http://atlanta.craigslist.org/car/710493923.html (http://atlanta.craigslist.org/car/710493923.html)
-
http://atlanta.craigslist.org/pts/676869187.html
-
Nice find Jimmy. I think I am gonna check on me some 35s
-
1999 Jeep Cherokee 33x10.50 BFG mud terrains 5 inch lift - $4000 (Newnan, GA)
http://atlanta.craigslist.org/car/711915093.html (http://atlanta.craigslist.org/car/711915093.html)
(http://images.craigslist.org/011512010305011607200806070c786fc8cf66b3366c009131.jpg)
-
Jeremy: click the dang link.
http://atlanta.craigslist.org/search/pts?query=jeep&minAsk=min&maxAsk=max
-
Here ya go Adam. Get this and give me yours.
http://atlanta.craigslist.org/pts/718997680.html
-
Jeremy: click the dang link.
http://atlanta.craigslist.org/search/pts?query=jeep&minAsk=min&maxAsk=max
huh?
-
Jeremy: click the dang link.
http://atlanta.craigslist.org/search/pts?query=jeep&minAsk=min&maxAsk=max
huh?
http://atlanta.craigslist.org/pts/718934157.html
Sorry, my Ctrl-C and Ctrl-V skills are lacking :-[
-
I sent him this link and never got a response. Maybe it's him? ;) Dude, great deal and he has been up there for awhile now. JERM, DO IT!
-
I sent him this link and never got a response. Maybe it's him? ;) Dude, great deal and he has been up there for awhile now. JERM, DO IT!
Offer him $400 and see what happens?
-
I sent him this link and never got a response. Maybe it's him? ;) Dude, great deal and he has been up there for awhile now. JERM, DO IT!
sorry I kept meaning to send you a reply!
I think I am gonna leave it as is right now fellas. If the guy keeps coming down in price maybe but for now I have spent enough money lately on the bikes, lol.
-
Jerm, buy those, take those tires and mount them on your current rims and sell the Rubi wheels for almost as much as the tires and wheels cost together.
-
PEER PRESSURE!!!!!!!!!! :P
-
PEER PRESSURE!!!!!!!!!! :P
DDDDOOOOOOOOOOO IIIIIIITTTTTTT!!!!!!!!
-
HEA HEA HEA, HE SAID DO IT. HEA HEA. :D
-
http://atlanta.craigslist.org/pts/733495430.html
-
Chromolly shafts for TJ or YJ. Might be able to talk him down a little...
http://www.southernjeeps.org/phpbb/viewtopic.php?t=27199
-
and these. Purdy...
http://atlanta.craigslist.org/pts/746829595.html
-
http://atlanta.craigslist.org/pts/746680049.html
-
http://atlanta.craigslist.org/pts/746680049.html
seems like a pretty dang good deal. IT's the Fabtech bumper with a massive stinger on it.
-
ill give this a shot. Hopefully not a re-post
http://atlanta.craigslist.org/pts/746013362.html
bumper, winch and recovery gear for a TJ
-
Dang, that's a lot of good stuff.
-
Not craigslist and dont know if its a good deal but
http://forum.gon.com/showthread.php?t=212251
-
Chris's old jeep, Doug's soon to be old jeep i guess...
http://atlanta.craigslist.org/car/751159882.html
-
Chris's old jeep, Doug's soon to be old jeep i guess...
http://atlanta.craigslist.org/car/751159882.html
This is going to turn into Georgia Unlimited JK Rubicon Riders, lol.
-
Chris's old jeep, Doug's soon to be old jeep i guess...
http://atlanta.craigslist.org/car/751159882.html
This is going to turn into Georgia Unlimited JK Rubicon Riders, lol.
Well somebody better buy me one. ;)
-
Chris's old jeep, Doug's soon to be old jeep i guess...
http://atlanta.craigslist.org/car/751159882.html
This is going to turn into Georgia Unlimited JK Rubicon Riders, lol.
Jimmy dont be sippin on that Haterade
-
Chris's old jeep, Doug's soon to be old jeep i guess...
http://atlanta.craigslist.org/car/751159882.html
This is going to turn into Georgia Unlimited JK Rubicon Riders, lol.
Jimmy dont be sippin on that Haterade
Haterade? I'm jealous! What is cooler than an XJ that comes from the factory with removable doors and roof, 44's, lockers, and the ability to fit big tires without trimming the fenders or having an I'm-insecure-about-my-manhood lift kit?
-
I for one will NEVER sell mine!
-
Haterade, you know Gatorade for those who hate.
Could be worse, he could buy a white XJ
-
lol, I said I wasn't hatin'. White is the heaviest of all colors though, if it was another color it wouldn't have happened!
-
OOOPPPSSSS! I COULD SEE THAT ONE COMIN. AND NO WINCH! :P
-
I for one will NEVER sell mine!
Never is a very long time! ;D
-
Yes, it is. But I know I have a good thing. I have too many memories, busted knuckles, sweat, tears and $$$$ to ever give it up. I LOVE MY JEEP! I will be driving it when I am 80, towin it behind my camper! :D
-
lol, I said I wasn't hatin'. White is the heaviest of all colors though, if it was another color it wouldn't have happened!
Does a pound of white paint weigh more than a pound of black paint in MACON? :D
-
lol, I said I wasn't hatin'. White is the heaviest of all colors though, if it was another color it wouldn't have happened!
Does a pound of white paint weigh more than a pound of black paint in MACON? :D
No, the amount of black paint just far outnumbers the amount of white paint.
-
lol, I said I wasn't hatin'. White is the heaviest of all colors though, if it was another color it wouldn't have happened!
Does a pound of white paint weigh more than a pound of black paint in MACON? :D
No, the amount of black paint just far outnumbers the amount of white paint.
LOL! :D :D
-
Jimmy needs a gun permit ;)
Before he gets his ankle cut
-
not a bad deal on a buggy, especially if it runs well, hard to tell by the pics
http://chattanooga.craigslist.org/cto/816123595.html
-
Man, that thing is UGLY!
-
not sure what the deal is with this, but I hope someone took advantage of it..
http://atlanta.craigslist.org/cto/832426471.html
-
PLEASE REMOVE THE 8==D 3" BL!
-
JK Unlimited Rubicon sliders for $100
http://atlanta.craigslist.org/pts/844948123.html
-
Locked HP30/8.8/4.88's for XJ....$500
http://atlanta.craigslist.org/pts/861446081.html
-
Locked HP30/8.8/4.88's for XJ....$500
http://atlanta.craigslist.org/pts/861446081.html
HOLY CRAP!!! Nice find Jimmy
-
Locked HP30/8.8/4.88's for XJ....$500
http://atlanta.craigslist.org/pts/861446081.html
HOLY CRAP!!! Nice find Jimmy
Yeah, freaking steal. Someone buy them before I get the itchin' to.
-
http://atlanta.craigslist.org/cto/869354843.html
-
Dang, here's a well built rig for a very good price
http://www.southernjeeps.org/phpbb/viewtopic.php?t=28161
[attachment deleted by admin]
-
Mike, go ahead and grab these 40's ;D Ill snag your 37's and have no choice but to lift
http://atlanta.craigslist.org/pts/892105942.html
-
Here are 4 KMs's for $800
http://atlanta.craigslist.org/pts/900220360.html
-
Here are 4 KMs's for $800
http://atlanta.craigslist.org/pts/900220360.html
I just priced them on 4 Wheel parts with an in store pick up for $793.47 brand new. And I'm guessing that we can we could get another 10% off of that, which would put it around $718.61. I don't know if they have them in stock or not.
-
If anyone is looking for an adjustable front track bar for a TJ. . . Here is a killer deal.
Rubicon Express $50
http://atlanta.craigslist.org/pts/878290879.html
-
A very good deal on a nice Jeep. Look a this list!!!
http://atlanta.craigslist.org/cto/922075898.html (http://atlanta.craigslist.org/cto/922075898.html)
Year: 1999
Make: Jeep
Model: Wrangler Sport
Miles: 54,720 actual miles
Engine: Inline 6 (4.0L)
Transmission: Manual 5 Speed (NP241 transfer case)
* Full Steel Doors
* New Softop With Tinted Windows
* Dana 44 Rear w/ 33 Spline Superior Axles, 4.56 Gears, Teraflex Disc Brake Conversion & ARB Air Locker
* Dana 30 Front w/ 30 Spline Superior Axles, 4.56 Gears, ARB Air Locker, HD Front Hubs
* Heavy Duty Dana 30 Diff Cover
* RockCrusher Dana 44 Diff Cover
* OffRoad Only U Turn Steering
* Redneck Ram Hyrdo Steering (currently have stock gear box on with modified pump, but hydro steer kit is in box ready for quick reinstall)
* TeraLow 4:1 Ratio Transfer Case Lowering Kit
* Custom SYE (Slip Yoke Eliminator) & Dana Spicer Drive Shaft
* Currie AntiRock Front Sway Bar w/ Aluminum Arms
* JKS 1.25" Body Lift Kit
* Rubicon Express Long Arm Tri-Link 5.5" Suspension Lift w/ Adjustable Rear Track Bar
* Rubicon Express Monotube Shocks
* FabTech S8006 Steering Stabilizer
* Extended Bump Stops
* JKS Bar Pin Eliminators on Front/Rear Shocks
* K&N Fuel Injection Performance Kit
* Banks Stinger Monster Exhaust
* Banks Torque Tube (intake manifold)
* Rubicon Express 62mm Throttle Body
* Rubicon Express Billet Aluminum Throttle Body Spacer
* Rock Crawler Series 97 Black 15x8 5on4.5 Wheels
* Interco Super Swamper iROK Radial Tires (37x12.50R15)
* Locking Lug Nuts
* Power Slot Brake Rotors & Hawk Performance Pads
* 46" Jeeperman Winch Ready Rock Crawler Front Bumper w/ Shackle Mounts
* Warn 9000 Power Plant Winch w/ Built-in Air Compressor
* Grant4x4 Rock Crawler Rear Bumper with Hitch Receiver, Swing Out Tire Carrier, Shackle Mounts, Jack Mount & CB Antenna Mount
* Skid Row Control Arm Skids
* Warn Steering Box Skid Plate
* Warn Gas Tank Skid Plate
* Rock Sliders (bolt on frame)
* Poison Spyder Tube Fenders (front)
* Line-X Truck Bed Liner Spray Full Inner Tub (Black)
* Tuffy Series II Security Console
* Tuffy Security Glove Box
* Bestop Extenda Trunk
* Neoprene Seat Covers (Front & Rear)
* Bestop Safari Bikini Top
* Bestop Duster Deck Cover
* Bestop Windjammer
* Heavy Duty Deep Cycle Offroad Battery
* Full Size Door Covers
* Full Monty Custom Jeep Cover
* Crime Guard 745i4 Alarm System w/ Motion Detector
* IPF Halogen Light Upgrade
* Mirror Relocation Brackets
* Procomp 6" Round Offroad Lights
* D-Ring Shackles
* OffRoad Rollbar Grab Handles
* Masterpull 5/16"x125' Synthetic Winch Rope
* Cobra 75WXST CB Radio
* 48" HighLift Jack
(http://images.craigslist.org/1261331g23n23me3o58bg35d65c885b0219bf.jpg)
-
Anybody need any "GOODWRENCH" Mud terrains for a steal in 17's x 37?? :D :D :D :D
http://atlanta.craigslist.org/pts/925030094.html (http://atlanta.craigslist.org/pts/925030094.html)
-
Nah I'm looking for the GMGoodrich ;)
-
Apparently 4Wheel Parts is having a BFG sale.... :-\
I was just checking prices for 35s and here they are for the KMs and KM2s.
http://www.4wheelparts.com/shoppingcart.aspx
-
Do we get another 10% off for club members?
-
Do we get another 10% off for club members?
I don't believe so. Not with 4 Wheel Parts at least. I'm pretty sure they promised free stuff for big rides each year though. Matt will have to chime in on this one.
-
Club members get a minimum of 5% with 4wp. If you want on the list, speak to Adam.
-
yeah, i was there 2 days ago for my bracket, and told mark i was with gatr, and he put a 10% off i think.
-
Albert told me that we would get any from 5 to 10% depending on what it is. He said tires barley have any mark up so those get a very minimal discount.
-
I bought new tires on Friday and they couldn't give me any club discounts on them because of the discount already applied by the manufacturer but, they did give me $10 off on the no questions asked warranty and another $10 off on the front end alignment so I can't complain.
-
I bought new tires on Friday and they couldn't give me any club discounts on them because of the discount already applied by the manufacturer but, they did give me $10 off on the no questions asked warranty and another $10 off on the front end alignment so I can't complain.
So what tires did you buy?????
-
km2
-
Not craigs but a great deal
http://forum.gon.com/showthread.php?t=264613
-
so i could get 10% off for being a GATR member and another 10% off for being in the military??? that would be cool if that could happen... hell anyone in need of parts come get me... we get ya 20% off...hahahaha
-
I bought new tires on Friday and they couldn't give me any club discounts on them because of the discount already applied by the manufacturer but, they did give me $10 off on the no questions asked warranty and another $10 off on the front end alignment so I can't complain.
So what tires did you buy?????
What Matt said, "KM2" and they need to be tested................................
-
3/4 tons I think?? http://augusta.craigslist.org/pts/934221950.html
-
That d44 is a 1/2 ton but with 3/4 ton outers.
-
So, are all "3/4 ton" 44's just 1/2 tons wth 3/4 ton outers? Or is there a true 3/4 ton 44?
-
I dont know I just know thats what the fords are. I think some have bigger axles. I just want a hp60. ;D
-
I just want a hp60. ;D
I looked at the Pull-A-Part today and couldn't find any! It was a bad day anyway. I couldn't find a d44 shaft for you, I couldn't find a big u-joint d30 shaft for Will, and I couldn't find a driveshaft for myself. I did find a v8 ZJ tie rod though {cool}
-
So, are all "3/4 ton" 44's just 1/2 tons wth 3/4 ton outers? Or is there a true 3/4 ton 44?
There is no 3/4 ton 44. The one found in the 3/4 tons just use bigger brakes and hubs from the D60.
-
sweet built rig..sounds like a good price to me..
http://atlanta.craigslist.org/cto/934137311.html
-
You could probably buy this, part it out, and come out with some free 60's http://forum.gon.com/showthread.php?t=267436&highlight=mud+truck
-
http://forum.gon.com/showthread.php?t=269773
and can someone tell me what is up with the front tie rod..
-
Some sort of hideous skid plate and no lockers?!
-
http://www.southernjeeps.org/phpbb/viewtopic.php?t=28829
-
http://atlanta.craigslist.org/pts/972650655.html
-
DAMN! I should have waited before I jumped into getting my new truck.....I could have bought this instead. It would have been $1000 less even!
http://atlanta.craigslist.org/cto/967993551.html
-
DAMN! I should have waited before I jumped into getting my new truck.....I could have bought this instead. It would have been $1000 less even!
http://atlanta.craigslist.org/cto/967993551.html
You would have been the Man of Macongo in that.
-
I don't think it has enough shocks :o
And it needs a steel plate in front of the batteries in case of explosions!
-
Wow...
(http://i120.photobucket.com/albums/o200/soulseeka/99%20Navigator/a67dffec.jpg)
and OH MY...
(http://i120.photobucket.com/albums/o200/soulseeka/99%20Navigator/dc74ae27.jpg)
almost forgot...
(http://i120.photobucket.com/albums/o200/soulseeka/99%20Navigator/59f868a0.jpg)
-
yikes.
-
http://atlanta.craigslist.org/cto/974636323.html
-
http://atlanta.craigslist.org/cto/974636323.html
I want that!
-
Someone make me an offer on my Jeep so I can go buy this thing and help it continue downs its path to a long, slow death ;D
http://atlanta.craigslist.org/cto/978955697.html
-
$4900
http://atlanta.craigslist.org/cto/982592196.html (http://atlanta.craigslist.org/cto/982592196.html)
(http://images.craigslist.org/3k63ob3l61fc128144916869586cdac961f55.jpg)
-
never installed Kilby gas tank skid for a TJ, only 150, in Cumming. I really want this for myself but can't do it right now....http://atlanta.craigslist.org/pts/979948204.html (http://atlanta.craigslist.org/pts/979948204.html)
-
http://atlanta.craigslist.org/cto/987268880.html (http://atlanta.craigslist.org/cto/987268880.html)
(http://images.craigslist.org/3n03m83o41f114b13891adb275d7554be1987.jpg)
-
Someone make me an offer on my Jeep so I can go buy this thing and help it continue downs its path to a long, slow death ;D
http://atlanta.craigslist.org/cto/978955697.html
anyone have a trailer and a tow pig i can use to pick this thing up...
just joking i didnt buy it so Jimmy its still yours
-
http://cgi.ebay.com/ebaymotors/2007-Jeep-Wrangler-JK-Rock-Crawler-Lifted-4x4-4-door-NR_W0QQitemZ250355344232QQihZ015QQcategoryZ6285QQssPageNameZWDVWQQrdZ1QQcmdZViewItem (http://cgi.ebay.com/ebaymotors/2007-Jeep-Wrangler-JK-Rock-Crawler-Lifted-4x4-4-door-NR_W0QQitemZ250355344232QQihZ015QQcategoryZ6285QQssPageNameZWDVWQQrdZ1QQcmdZViewItem)
Mike L will enjoy these pictures (a lot more with detail shots of everything in the thread) of a JK on 47's with an Atlas, Rock Jock 60's, ARB's, Coil Overs with air bump stops, Exo-Cage.
(http://i280.photobucket.com/albums/kk175/luxurymotorcars/Jeep%20JK/jeep001.jpg)
(http://i280.photobucket.com/albums/kk175/luxurymotorcars/Jeep%20JK/jeep008.jpg)
-
DDDDRRRROOOOOLLLLLLL!!!!!!!!!!!!!!!!!! :P
-
The impressive thing is that cage. It's like $800 worth of tubing :D
-
You gotta be kidding me, CTM U-joints! I've never actually seen a Jeep with those on there. :D
-
Sweet, it's a Sahara.
-
Its kind of in rough shape, diff fluid everywhere, me likey!!!
-
http://forum.gon.com/showthread.php?t=284659
-
http://forum.gon.com/showthread.php?t=283097
-
Not Sure if this is a real listing can't check it from work, but funny all the same
http://savannah.craigslist.org/rnr/982078099.html
From the above link...
To the Guy Who Mugged Me Downtown (Downtown, Savannah )
I was the white guy with the black Burrberry jacket that you demanded I hand over shortly after you pulled the knife on me and my girlfriend. You also asked for my girlfriend's purse and earrings. I hope you somehow come across this message. I'd like to apologize.
I didn't expect you to crap your pants when I drew my pistol after you took my jacket. Truth is, I was wearing the jacket for a reason that evening, and it wasn't that cold outside. You see, my girlfriend had just bought me that Kimber 1911 .45 ACP pistol for Christmas, and we had just picked up a shoulder holster for it that evening. Beautiful pistol, eh? It's a very intimidating weapon when pointed at your head, isn't it?
I know it probably wasn't a great deal of fun walking back to wherever you'd come from with that brown sludge flopping about in your pants. I'm sure it was even worse since you also ended up leaving your shoes, cellphone, and wallet with me. I couldn't have you calling up any of your buddies to come help you try to mug us again. I took the liberty of calling your mother, or "Momma" as you had her listed in your cell, and explaining to her your situation. I also bought myself some gas on your card. I gave your shoes to one of the homeless guys over by Vinnie Van Go Go's, along with all of the cash in your wallet, then I threw the wallet itself in a dumpster.
I called a bunch of phone sex numbers from your cell. They'll be on your bill in case you'd like to know which ones. Alltel recently shut down the line, and I've only had the phone for a little over a day now, so I don't know what's going on with that. I hope they haven't permanently cut off your service. I was about to make some threatening phone calls to the DA's office with it. Oh well.
So, about your pants. I know that I was a little rough on you when you did this whole attempted mugging thing, so I'd like to make it up to you. I'm sure you've already washed your pants, so I'd like to help you out. I'd like to reimburse you for the detergent you used on the pants. What brand did you use, and was it liquid or powder? I'd also like to apologize for not killing you and instead making you walk back home humiliated. I'm hoping that you'll reconsider your choice of path in life. Next time you might not be so lucky. If you read this message, email me and we'll do lunch and laundry. Peace! - Alex
-
cruisin craig's & found these nice 34x9.50 ..decent price too... http://chattanooga.craigslist.org/pts/983132725.html (http://chattanooga.craigslist.org/pts/983132725.html)
also found this crawler..awful cheap...
http://chattanooga.craigslist.org/rvs/986849489.html
-
Bumpers for sale at Nates.... http://www.nates4x4.com/catalog/index.php?cPath=33&osCsid=837ed7649da785fc64e7622a2e4fdff5
-
1993 jeep grand cherokee 4x4 - $900
http://atlanta.craigslist.org/cto/998281080.html (http://atlanta.craigslist.org/cto/998281080.html)
-
Hey Mark,
That's funny as heck! I'm not sure if it really happened or not but I would hope that I could be that calm and react like that if it ever happened to me ;D
-
Bumpers for sale at Nates.... http://www.nates4x4.com/catalog/index.php?cPath=33&osCsid=837ed7649da785fc64e7622a2e4fdff5
Ughh... The bumper I want when I have no money...
-
(http://1.media.collegehumor.com/collegehumor/ch6/c/6/collegehumor.50fdc9bc8efe82109f8f18e6d4b7049a.jpg)
-
There are a ton of those on the list! I always read them for laughs!
-
seems I remember reading that someone is in need of a 31x10.50..
here's 4 pro comps for $165.00 70% tread...
http://atlanta.craigslist.org/pts/1000467028.html (http://atlanta.craigslist.org/pts/1000467028.html)
-
(http://1.media.collegehumor.com/collegehumor/ch6/c/6/collegehumor.50fdc9bc8efe82109f8f18e6d4b7049a.jpg)
That last sentence is awesome.
-
seems there may be several on here that might need this..lol
new HD tie rod.. only $50.00, retails over $160.00.. good buy..
NIB .... JEEP CHROMOLY TIE ROD
http://atlanta.craigslist.org/pts/999150547.html (http://atlanta.craigslist.org/pts/999150547.html)
-
TJ Trail Rig for $3200
http://atlanta.craigslist.org/cto/997918229.html
-
http://forum.gon.com/showthread.php?t=283097
Holy crap somebody buy these!
:o
-
Josh theres some tires!
-
not sure if this has been posted yet or not
http://orlando.craigslist.org/pts/993784548.html
-
5" suspension lift and 3" body lift, side and rear corner rock guards, 33" tires,Dana 30/35 axles
WTF!
-
http://macon.craigslist.org/pts/998090121.html
-
who needs a CHEAP winch?
http://macon.craigslist.org/pts/994696294.html
-
http://macon.craigslist.org/pts/994678300.html
-
http://macon.craigslist.org/pts/984722450.html
-
http://macon.craigslist.org/pts/994678300.html
Damn! 8.8 with discs for $95. I work down that way, pay for my diesel and I'll pick it up for ya!
-
Thats better price than pap. Good deal
-
http://macon.craigslist.org/pts/998090121.html
will, i thought that was your jeep...haha. we neeed to find him and get some of that stuff.
-
I actually like that grill guard. Kyle, buy all of it and sell me the guard ;D
-
I actually like that grill guard.
{:CH} 8==D
-
Truggy, for sale,.. not to bad a price.. bet he has a lot more in it...
http://atlanta.craigslist.org/cto/1001209362.html (http://atlanta.craigslist.org/cto/1001209362.html)
-
5 Brand New BFG M/T Tires $100.00 each..
http://atlanta.craigslist.org/pts/1003153869.html (http://atlanta.craigslist.org/pts/1003153869.html)
----------------------
"GOOD DEAL HERE!!" if nothing but spares!
$25.00 for 4 MT Baja's 11/32 of tread left!!
http://athensga.craigslist.org/pts/1000179448.html
-
Here you go Jimmy
http://macon.craigslist.org/pts/1004737042.html
-
I need a tow pig! >:(
-
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=190263642723#ebayphotohosting
-
yea i know but what a nice deal... all you XJ guys are like WTF????
http://honolulu.craigslist.org/oah/cto/999855638.html
-
check out the springs on this thing haha
http://atlanta.craigslist.org/cto/995956866.html
-
Pretty nice TJ on 35s.. Jimmy you remember this guy. It's come a long way since he brought it to River Rock to break the 35 :)
http://www.southernjeeps.org/phpbb/viewtopic.php?t=29347
-
Pretty nice TJ on 35s.. Jimmy you remember this guy. It's come a long way since he brought it to River Rock to break the 35 :)
http://www.southernjeeps.org/phpbb/viewtopic.php?t=29347
LOL, I was about to PM that very link to you. It looks pretty pimp.
-
Would make a good trail rig.... http://macon.craigslist.org/pts/1009025016.html
-
http://atlanta.craigslist.org/pts/984095057.html
did this come from mancongo?
-
37"s anybody?
http://www.mallcrawlin.com/forum/showthread.php?p=232007#post232007
-
Jimmy, make money and buy those! ;D
-
Rubi for $9500! For someone getting started, a great buy.
http://cgi.ebay.com/ebaymotors/Wrangler-Rubicon-2003-Soft-Top-Great-Buy_W0QQitemZ230323127959QQihZ013QQcategoryZ6285QQssPageNameZWDVWQQrdZ1QQcmdZViewItem (http://cgi.ebay.com/ebaymotors/Wrangler-Rubicon-2003-Soft-Top-Great-Buy_W0QQitemZ230323127959QQihZ013QQcategoryZ6285QQssPageNameZWDVWQQrdZ1QQcmdZViewItem)
(http://i4.ebayimg.com/01/i/001/2f/7c/8346_1.JPG)
-
damn doug you should get that... thats about the same price you sold that TJ for wasnt it...
-
:o :o http://atlanta.craigslist.org/pts/1017842877.html
-
damn doug you should get that... thats about the same price you sold that TJ for wasnt it...
lol! Man, I wish. Made a littlel but not a lot.
-
Good start
http://forum.gon.com/showthread.php?t=297916
-
Hell of a deal!!!!
http://atlanta.craigslist.org/pts/1019847881.html
-
Hell of a deal!!!!
http://atlanta.craigslist.org/pts/1019847881.html
Stay away! {no} [hammer] {:CH} {;-(} :fu( ~>}
-
tRAIL 4 AND WET. {no}
-
http://atlanta.craigslist.org/pts/1027151704.html Freakin steal!!!!!!!!!!!!!!!!!
-
http://atlanta.craigslist.org/pts/1027151704.html Freakin steal!!!!!!!!!!!!!!!!!
I need those but have to sit on my $$$ till my other deals work themselves out.
-
http://atlanta.craigslist.org/pts/1028513040.html
A little high priced, depending on what's inside them.
-
http://columbia.craigslist.org/pts/1026955311.html
-
# Utility, 1990 Jeep Wrangler, 350 motor, AT, half ton axles, 35” tires, new soft top, new headers & Flowmaster muffler, work in progress, GC, $2,500,478-957-9744
Listed on local credit union bulletin.
-
http://forum.gon.com/showthread.php?t=305974
-
here you go a nice jeep cheap...
http://washingtondc.craigslist.org/nva/ctd/1038439218.html
-
If it was lifted and full width, it would be road trip. {letseat}
-
$600 RE long arms and crossmember for XJ: http://www.naxja.org/forum/showthread.php?t=986113
-
Rubi Rear DS
http://clarksville.craigslist.org/pts/1050777564.html
-
Rubi Rear DS
http://clarksville.craigslist.org/pts/1050777564.html
I will sell anyone interested a '06 rubicon driveshaft with about 5k miles for $50.00
-
Rubi Rear DS
http://clarksville.craigslist.org/pts/1050777564.html
I will sell anyone interested a '06 rubicon driveshaft with about 5k miles for $50.00
I think I can use that as a spare with my Rubi 4:1 case. {letseat}
EDIT: No I can't! No CV
-
http://atlanta.craigslist.org/pts/1101534510.html
Dana 60 Bolt in for YJ
-
There is one on CL for $175! ;)
-
Tow Pig Camper
http://atlanta.craigslist.org/cto/1096535097.html
-
This sounds too good to be true, so it probably is. I don't have the money to buy it, but she sounds like a lot of Jeep for 10K.
http://atlanta.craigslist.org/cto/1164120568.html
-
This sounds too good to be true, so it probably is. I don't have the money to buy it, but she sounds like a lot of Jeep for 10K.
http://atlanta.craigslist.org/cto/1164120568.html
If it is real, and those axles are stock, you'd have to spend a good bit to make them hold up to 37's and a 350. You think he'd include pictures of the engine though. I want a v8 Jeep {cool}
-
This sounds too good to be true, so it probably is. I don't have the money to buy it, but she sounds like a lot of Jeep for 10K.
http://atlanta.craigslist.org/cto/1164120568.html
If it is real, and those axles are stock, you'd have to spend a good bit to make them hold up to 37's and a 350. You think he'd include pictures of the engine though. I want a v8 Jeep {cool}
Mall Crawler.
-
Yeah this Jeeps been on there awhile. It started out somewhere around $12,000 to $13,000.
-
This sounds too good to be true, so it probably is. I don't have the money to buy it, but she sounds like a lot of Jeep for 10K.
http://atlanta.craigslist.org/cto/1164120568.html
If it is real, and those axles are stock, you'd have to spend a good bit to make them hold up to 37's and a 350. You think he'd include pictures of the engine though. I want a v8 Jeep {cool}
I have a V8 Jeep I'd sell ya.
-
May be a mall crawler, but it's got a good start. Axles and a stretch would be my plan. I just want a v8.
-
Set of Waggy 44's for $350 in NC. http://naxja.org/forum/showthread.php?t=994948
-
waggy 44 front $150:
http://atlanta.craigslist.org/pts/1166044209.html (http://atlanta.craigslist.org/pts/1166044209.html)
-
waggy 44 front $150:
http://atlanta.craigslist.org/pts/1166044209.html (http://atlanta.craigslist.org/pts/1166044209.html)
No good for most of us, passenger drop.
-
Woops, I thought it said driver. Oh well.
-
I seen where Jimmy put his ride up for sale..
http://macon.craigslist.org/cto/1166479926.html
-
Thanks for showing off my awesome fab skills!
-
lol...i wonder how well that thing would handle trails
-
http://atlanta.craigslist.org/pts/1177052790.html
-
http://forum.gon.com/showthread.php?t=351619
-
http://forum.gon.com/showthread.php?t=351909
-
http://forum.gon.com/showthread.php?t=351909
Buy it Will, then you could mall crawl the White Wrangler like I do mine.
-
Why would you post a picture of a vehicle overheating while you are trying to sell it? lol
-
Why would you post a picture of a vehicle overheating while you are trying to sell it? lol
That's what I was thinking, overheating and sitting in nasty freakin mud. ::)
Mark, if I could find a deal on an XJ like yours I would :P
-
http://atlanta.craigslist.org/cto/1208443457.html
-
http://atlanta.craigslist.org/cto/1209022184.html
-
http://forum.gon.com/showthread.php?t=358347
-
http://atlanta.craigslist.org/cto/1209505210.html
-
http://atlanta.craigslist.org/cto/1199347966.html
-
http://atlanta.craigslist.org/cto/1199347966.html
This truck could be a beast!
-
http://atlanta.craigslist.org/cto/1199347966.html
This truck could be a beast!
Or a source for a free axle.
-
http://atlanta.craigslist.org/cto/1199347966.html
This truck could be a beast!
Or a source for a free axle.
Yep, that thought crossed my mind also!
-
WOW!
http://houston.craigslist.org/pts/1204682032.html (http://houston.craigslist.org/pts/1204682032.html)
-
WOW!
http://houston.craigslist.org/pts/1204682032.html (http://houston.craigslist.org/pts/1204682032.html)
These must be titanium gears.
-
WOW!
http://houston.craigslist.org/pts/1204682032.html (http://houston.craigslist.org/pts/1204682032.html)
These must be titanium gears.
Post was deleted. What was it?
-
It was an advertisement for a installing gears in a JK for $650.
-
WOW!
http://houston.craigslist.org/pts/1204682032.html (http://houston.craigslist.org/pts/1204682032.html)
These must be titanium gears.
Post was deleted. What was it?
Awww, cookies!
JEEP JK JEEP JK GEARS - $650 (HOUSTON)
Reply to:sale-sgpna-1204682032@craigslist.org
Date: 2009-06-04, 6:56AM CDT
JEEP JK GEARS INSTALLED 650.00
THIS PRICE INCLUCEDS FRONT AND REAR RING AND PINIONS AND THE LABOR TO INSTALL
ALL OR WORK COMES WITH A 2YEAR 24000 MILE WARRENTY
THESE GEARS ARE THE BEST ON THE MARKET
CK OUT OR WORK ON JUST ABOUT EVERY JEEP FORUM AROUND
WE OR PROUD SUPPORTS OF THE SOUTHERN HIGH ROLLERS OFF ROAD CLUB
HOUSTON JEEP PEOPLE MEET UP AND MANY OTHERS
CK OUT OR WEB SITE @ http://www.249drivetrain.com
OR CALL ME ALLEN @281-999-6592 THANKS
-
http://atlanta.craigslist.org/pts/1213379737.html
TJ BDS 4" lift
-
"COST OVER 1800.00 NEW"
:bs)
-
cheep 4cyl TJ
http://atlanta.craigslist.org/cto/1216178505.html
-
cheep 4cyl TJ
http://atlanta.craigslist.org/cto/1216178505.html
deleted dude-
-
cheep 4cyl TJ
http://atlanta.craigslist.org/cto/1216178505.html
deleted dude-
too slow.
-
Dana 60 rearend!-- http://atlanta.craigslist.org/pts/1177249756.html
-
http://atlanta.craigslist.org/pts/1219404215.html ----another dana 60 with a locker.
-
link bar form tractor supply? what? {ehm} check out the photobucket
http://knoxville.craigslist.org/pts/1218157625.html
-
good deal http://greenville.craigslist.org/ctd/1198782193.html
-
good deal http://greenville.craigslist.org/ctd/1198782193.html
Thats all you just sell all your other projects and get it. ;D
-
u get it and let kelli have urs
-
link bar form tractor supply? what? {ehm} check out the photobucket
http://knoxville.craigslist.org/pts/1218157625.html
I dont think the double weld would be to safe.
(http://i152.photobucket.com/albums/s181/siloped/Little%20Suzi/DSCF1511.jpg)
And I see the 3 point tractor bars in there also.
-
In one picture it looks like the steering is coming off the passenger side? Or is the picture flipped?
I don't even see jam nuts on the links. I guess it flexes better this way. ;D
-
Jimmy I just seen that it dont have jam nuts. Look in the pic I posted.
Guess I dont need them.
I have a set of 4 Jam nuts forsale 20.00 obo :bs)
-
Looks like he forgot about the pinion angle on the rear axle. :o Or I could be wrong and he wants it to run parallel with the ground. {hihi} I would be afraid of losing everything I got if I sold that to someone.
-
i keep looking at the pics doing this {ehm} r u for real {ehm} {:CH}
-
Found the perfect job for Will or Kyle, lolololol
http://macon.craigslist.org/wan/1225823159.html
-
Found the perfect job for Will or Kyle, lolololol
http://macon.craigslist.org/wan/1225823159.html
Hahahahahahahahahaha. I rarely openly laugh when I see something on the internet but this has me balling.
-
Found the perfect job for Will or Kyle, lolololol
http://macon.craigslist.org/wan/1225823159.html
That's some funny $hit, but it's not right.................
-
Open minded and it pays well. Maybe a little of this {bang}.
Damn Jimmy to bad you are not in good shape. ;D
-
{hihi}
-
Damn Jimmy to bad you are not in good shape. ;D
I'm glad! haha. Beth saw it and said "perfect for Will".
-
LMAO! {hardlaugh} {hardlaugh} {hardlaugh}
-
thats gotta be the funniest posting i've seen on craigslist {hardlaugh} {hardlaugh}
-
{hihi} LMAO {hihi}
Will's in Lagrange for the summer, go a head Kyle you need some extra flow for the Heep, we won't tell.
:bs)
-
{hardlaugh}
-
8==D 8==D 8==D 8==D 8==D
-
{hihi} LMAO {hihi}
Will's in Lagrange for the summer, go a head Kyle you need some extra flow for the Heep, we won't tell.
:bs)
nah, already have too many "customers". where do you think i make my money? valet-ing? yeah right.
{nln}
-
Found the perfect job for Will or Kyle, lolololol
That's great! Unless something really funny comes along, that one already took the laugh of the day for me! Man.. I needed that. Great find Jimmy.
where do you think i make my money?
But Kyle, it's only for the summer and I'm sure it won't interfere with the wheeling you can't do right now. Hell, it might even speed the process of getting you back on the trails. A little extra money never hurt anyone. He might even let you do Herbert's voice the whole time. I'd say go for it! :D
-
"...hey there mr muscley arms...just lookin for some good news."
wouldnt he be playing the role of herbert tho?
wonder how long it will be before will sees this.
-
wouldnt he be playing the role of herbert tho?
I suppose so, but still it'd be funny. Plus Will probably can't do Herbert's voice as well. That's why you're the man for the job.
wonder how long it will be before will sees this.
Not sure, but I'll bet for a little extra cash, Will would be more than happy to drive to cut some grass... and possibly a little something else. The guy wasn't too clear as to why the college student should be open minded... {ehm}.... {bang}
-
"...hey there mr muscley arms...just lookin for some good news."
wouldnt he be playing the role of herbert tho?
wonder how long it will be before will sees this.
"I got some Popsicles in the basement."
-
lol, Daniel, remember when we were banned from talking on CB because we were talking like Herbert all day? lol
-
lol, Daniel, remember when we were banned from talking on CB because we were talking like Herbert all day? lol
"You're startin' to piss me off, you piggly son of a bitch!
Call Me!!!"
-
lol, perfect. I was waiting for the Call Me, I knew you wouldn't let me down Ben.
-
lol, Daniel, remember when we were banned from talking on CB because we were talking like Herbert all day? lol
"You're startin' to piss me off, you piggly son of a bitch!
"Got a nice tip for you in my pocket"
Call Me!!!"
-
http://atlanta.craigslist.org/pts/1227799790.html
-
http://atlanta.craigslist.org/pts/1227799790.html
That ain't a bad deal right there. Plus tires too.
But you would need a strong-armed paper boy to move it I bet.
-
Anyone who maybe interested:There is a 1979 F350 Dana 60 front end on Craigslist in upstate SC.I don't know how to post you a link to it but here is the phone number 864-328-4474.It sez he also has the matching rear also.
Jon
-
Open minded and it pays well. Maybe a little of this {bang}.
Damn Jimmy to bad you are not in good shape. ;D
funny shit----
-
http://greenville.craigslist.org/pts/1209109684.html (http://greenville.craigslist.org/pts/1209109684.html)
-
Found the perfect job for Will or Kyle, lolololol
http://macon.craigslist.org/wan/1225823159.html
Jimmy,
Are you saying that you think Will is a nice young hot muscular college boy?
-
Found the perfect job for Will or Kyle, lolololol
http://macon.craigslist.org/wan/1225823159.html
Jimmy,
Are you saying that you think Will is a nice young hot muscular college boy?
Negatory. I'm just saying he might be down with that sort of thing.
-
Found the perfect job for Will or Kyle, lolololol
http://macon.craigslist.org/wan/1225823159.html
Jimmy,
Are you saying that you think Will is a nice young hot muscular college boy?
Negatory. I'm just saying he might be down with that sort of thing.
~>}
{popcorn}
-
Ha ha, just checking ;D
-
lol, Daniel, remember when we were banned from talking on CB because we were talking like Herbert all day? lol
Oh yeah, I sure do. You know, if you ever get you Jeep running again, I think next trip we should do it again!!
Have you seen one of the newer episodes where Stewie takes over the paper route and I forget what Herbert says to him, but Stewie says something smart ass-y back to him and drives off on his big wheel and Herbert goes "we got a fighter." I got the DVD so I had to watch that part like 6 times. He kills me.
-
"Hmm, looks like we got ourselves a new paperboy to bring me some good news"
"Piss off you creepy old pervert"
I think something like that?
Anyway, back on topic:
Could make a good trailer for a shorter rig with a little work:
http://macon.craigslist.org/grd/1230856659.html
Same guy:
http://macon.craigslist.org/grd/1228423349.html
-
"Hmm, looks like we got ourselves a new paperboy to bring me some good news"
"Piss off you creepy old pervert"
I think something like that?
Anyway, back on topic:
Could make a good trailer for a shorter rig with a little work:
http://macon.craigslist.org/grd/1230856659.html
Same guy:
http://macon.craigslist.org/grd/1228423349.html
Both of them done got themselves deleted.
-
Damn that was quick. Both were equipment trailers. First was 14', triple axle (all with brakes) for $675. Second was 20', double axle (all with brakes) for $1150.
-
2nd was 16 {nln}
the link still works for me
-
2nd was 16 {nln}
the link still works for me
That's the cache/cookies trick. Hit refresh and say bye bye. ;)
-
http://atlanta.craigslist.org/zip/1232699554.html
-
http://atlanta.craigslist.org/zip/1232699554.html
d-d-d-deleted.
-
It was 2 big tool boxes full of tools for free. It was listed today around 3. I knew it wouldnt last long
-
http://atlanta.craigslist.org/pts/1233164249.html
-
COOL!
-
that is pretty sweet-- if you look at the last pic- you can see a rig in the back- i saw that rig at river rock during sping crawl- cant rember the guy though.-- but very good prices!!
-
that is pretty sweet-- if you look at the last pic- you can see a rig in the back- i saw that rig at river rock during sping crawl- cant rember the guy though.-- but very good prices!!
the rig in the background is Jerry's. I believe the guy selling the chassis built that rig as well.
-
http://knoxville.craigslist.org/pts/1235155498.html
http://knoxville.craigslist.org/pts/1201707872.html
-
http://atlanta.craigslist.org/cto/1248031595.html
-
That looks like it might have come straight out of Jeepers Creepers. :o
-
http://atlanta.craigslist.org/cto/1248031595.html
Yes..... Uh.... I'll take the trailer for $200 please!
-
http://atlanta.craigslist.org/cto/1248031595.html
Yes..... Uh.... I'll take the trailer for $200 please!
But Doug, it's a Bad Boy!
-
I couldn't find the craigslist posting so I dumped it here!
http://stlouis.craigslist.org/pts/1234853367.html
-
http://atlanta.craigslist.org/pts/1252455394.html Dodge Gooseneck - $300
-
heres a hemi for you jeep guys http://atlanta.craigslist.org/pts/1253051188.html
-
http://savannah.craigslist.org/cto/1253249259.html
-
http://forum.gon.com/showthread.php?t=370714
-
Nice truck, but must be made of gold for the price... http://forum.gon.com/showthread.php?t=370850
-
yeah I seen that. :D
-
somebody needs this
http://atlanta.craigslist.org/cto/1253321388.html
-
http://atlanta.craigslist.org/pts/1254125190.html
-
That XJ would be pretty nice if it ran.
-
Then it wouldnt be 400 :D
-
http://forum.gon.com/showthread.php?t=371288
-
http://atlanta.craigslist.org/pts/1254501860.html
-
http://atlanta.craigslist.org/pts/1254174401.html
-
http://atlanta.craigslist.org/cto/1252048589.html
-
Hey guys Im looking for a Zuk, XJ, or toyota 4x4 truck if yall see any on craigslist that might be interested in trading a 90 Ford Bronco 4x4 XLT. Only needs a tranny.
If the posting looks like they might want it let me know plz. Thanks.
-
Just a couple of quick finds...
http://savannah.craigslist.org/pts/1255104699.html
Somebody has to want this for Moab.
http://savannah.craigslist.org/pts/1255098381.html
I think someone here was looking for a lighter trailer, although I don't know the weight rating for this one.
-
They were both the same link.
-
Will I found you a mud toy.
http://macon.craigslist.org/cto/1254572079.html
-
http://atlanta.craigslist.org/pts/1256462323.html
-
Dude we have been finding some deals. :o
I hope yall are buying {letseat}
-
Richard and I can pick up any parts in Atlanta or north for $20 this weekend :D
-
Wasn't someone looking for a laptop mount? http://knoxville.craigslist.org/pts/1256681102.html
-
They were both the same link.
Thanks for the heads up Richard. Link is fixed now.
-
Richard and I can pick up any parts in Atlanta or north for $20 this weekend :D
I think thats why I been looking so hard. :D
-
http://atlanta.craigslist.org/pts/1258306297.html
-
http://atlanta.craigslist.org/pts/1258213415.html
-
http://savannah.craigslist.org/cto/1258548520.html
I'm tempted to buy this and swap the rearends out, just doubt I could sit on it til it resales.
-
http://savannah.craigslist.org/cto/1258548520.html
I'm tempted to buy this and swap the rearends out, just doubt I could sit on it til it resales.
Do it and drop the price $100, and consider yourself to have bought a D44 for $100., Put a PAP water pump in and you shouldn't have any problem getting $400 out of it.
-
http://savannah.craigslist.org/cto/1258548520.html
I'm tempted to buy this and swap the rearends out, just doubt I could sit on it til it resales.
Do it and drop the price $100, and consider yourself to have bought a D44 for $100., Put a PAP water pump in and you shouldn't have any problem getting $400 out of it.
I think I may go look at it today, but before I do. Does anyone know what gear ratio came in the 44's? that will end up making or breaking the budget for me.
-
Since its a 6 cylinder auto, it should be 3.55s.
-
agreed!!!!!!-- do it man
-
BAHAHAHAHA, saw this posted on NAXJA. Ryan, want to get rid of your tires? HAHAHAHAHAHAHA
http://charlotte.craigslist.org/pts/1257050406.html
-
BAHAHAHAHA, saw this posted on NAXJA. Ryan, want to get rid of your tires? HAHAHAHAHAHAHA
http://charlotte.craigslist.org/pts/1257050406.html
Dude, that's just creepy.
-
That was wrong Jimmy ;D
-
that's some nasty stuff haha
-
{no} {nln} jimmy!!!!!!!!!!!!!!!
-
http://atlanta.craigslist.org/pts/1259471614.html
-
BAHAHAHAHA, saw this posted on NAXJA. Ryan, want to get rid of your tires? HAHAHAHAHAHAHA
http://charlotte.craigslist.org/pts/1257050406.html
Ryan, don't try that trade thing with me when you come to pick up this hitch {no} {no}
I agree with Richard.
-
I wonder if he mows lawns?
-
haha...probably
-
http://savannah.craigslist.org/cto/1258548520.html
I'm tempted to buy this and swap the rearends out, just doubt I could sit on it til it resales.
going to look at it this afternoon.
-
Sweet!
-
its agood deal if it runs well-- then youll have a second jeep to F up or a good parts jeep--
-
its agood deal if it runs well-- then youll have a second jeep to F up or a good parts jeep--
screw that, hopefully I'll be able to get my money back out of it... definately will have my ccw on me though, it's located in the ghetto.
-
37" MTRs w/ 10 miles for $650: http://atlanta.craigslist.org/pts/1260092221.html
-
37" MTRs w/ 10 miles for $650: http://atlanta.craigslist.org/pts/1260092221.html
hey jim how bout you find me some M/T 31x10.50x15s? ;D
-
its agood deal if it runs well-- then youll have a second jeep to F up or a good parts jeep--
screw that, hopefully I'll be able to get my money back out of it... definately will have my ccw on me though, it's located in the ghetto.
To follow up...
It does have the 44 rear. It needs a water pump, the wiring fixed and the engine is knocking... I'm going to pass on it due to lack of funds and time.
-
I'll keep my eye out on a 44 for ya at the PAPs, Logan.
-
I'll keep my eye out on a 44 for ya at the PAPs, Logan.
Every PAP I've been in that has an 87-89 XJ either has a 30 or no rearend at all. Go figure, I looked for a few years for the YJ before I decided on the 8.8.
-
I found one in Augusta once, but thats all.
-
http://cgi.ebay.com/ebaymotors/super-swamper-tsls-and-rock-crawler-rims_W0QQcmdZViewItemQQ_trkparmsZ65Q3a7Q7c66Q3a1Q7c39Q3a1Q7c293Q3a1Q7c294Q3a25QQ_trksidZp3286Q2ec0Q2em14QQhashZitem4a9904af87QQitemZ320394801031QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
-
37" MTRs w/ 10 miles for $650: http://atlanta.craigslist.org/pts/1260092221.html
hey jim how bout you find me some M/T 31x10.50x15s? ;D
Find me some cheap 33"s and I got your 31"s.
-
Do it by this weekend and I'll deliver, lol.
-
http://chattanooga.craigslist.org/pts/1252749724.html
-
I'll keep my eye out on a 44 for ya at the PAPs, Logan.
Thanks man. I'm not really dead set on a 44, it's just it would have been a nice upgrade if it was something I could turn over easily.
-
Sounds like a decent deal.
http://www.southernjeeps.org/phpbb/viewtopic.php?t=30997&highlight=
-
http://nashville.craigslist.org/pts/1260993243.html
-
http://knoxville.craigslist.org/pts/1260410411.html
-
http://knoxville.craigslist.org/pts/1259908298.html
-
Scoping out the TN craigslists there, aren't ya Jimbo?
-
Yeah, I have been checking Chattanooga and Knoxville every day this week since we are coming up tomorrow, lol.
-
here you go...
http://bham.craigslist.org/cto/1259698562.html
http://bham.craigslist.org/cto/1259544201.html
-
http://atlanta.craigslist.org/cto/1266380404.html
-
don't know if anybody is running 18" wheels, but if so.
http://atlanta.craigslist.org/pts/1266077098.html
-
http://atlanta.craigslist.org/cto/1269489102.html
-
OH DADDY WANT!!!!!!!!!!
-
Great engine choice. ;D
-
Great engine choice. ;D
I was thinking the same thing!
-
http://atlanta.craigslist.org/pts/1279404398.html
Somebody was looking for these!
-
mailto:sale-bfeww-1278276800@craigslist.org?subject=toyota%20straight%20axls%20-%20%24500%20(cartersville)
This is a good deal if someone had a sammy or wanted to start a buggy build.
-
mailto:sale-bfeww-1278276800@craigslist.org?subject=toyota%20straight%20axls%20-%20%24500%20(cartersville)
This is a good deal if someone had a sammy or wanted to start a buggy build.
this will help
http://atlanta.craigslist.org/cto/1278276800.html
-
Oops wasn't even paying attention. {;-(}
-
http://www.pirate4x4.com/forum/showthread.php?t=801568
-
JUST BOUGHT MINE-- sweet deal!!!!!!! {toast}
-
http://www.southernjeeps.org/phpbb/viewtopic.php?t=31207&highlight=&sid=6d69307ba8b65fd1376613d48ef6545f (http://www.southernjeeps.org/phpbb/viewtopic.php?t=31207&highlight=&sid=6d69307ba8b65fd1376613d48ef6545f)
Body Armor - TNT Custom Rear TJ Corner Guards with Flares
Just Paid $600 in March '09. Yours for $450. Call Brad 678-360-5474
http://www.gotreks.com/page.asp?pageid=234
The radius is pressed in a singular motion with precision dies, for superior fit.
Stock wheel opening accepts stock TJ plastic flare (drilling of mounting hols required).
Fabricated of 3/16" steel plate, same as our rock sliders.
Our corner guards are pre-punched for 3/8" SS button head fasteners - 11 bolts per side
Protect the side of your TJ with our 3/16" steel Body Armor! Add rugged good looks by adding one of our welded tubular flares - 3". Our flares are welded to the corner blanks, no light duty bolt on flares are available. Welding the flares ensures they are just as strong as the rest of our body armor - ready to take whatever the trail gives you.
Our corners bolt on through 11 pre-punched mounting holes, using with 3/8" stainless steel button head fasteners - giving a clean functional look. Mounting holes are pre-cut for a simple install of your OEM tail lights or Lite DOTS. Our corners do not use tail gate hinge cut outs as our competitors do, the hinges bolt on top of the corner - giving a clean professional install. (spacers are provided for under the door side of the hinge).
(http://www.southernjeeps.org/phpbb/files/img00027-20090410-1943.jpg)
-
you craigslisters keep an eye out for some 37's for a 15'' wheel for me
-
I have 3
o never mind they are for a 17
-
I have 3
o never mind they are for a 17
Yeah bull shit.
-
:D :D :D :D :D :D :D
-
good deal
http://hardlinecrawlers.com/forums/index.php?topic=6373.0
-
http://www.southernjeeps.org/phpbb/viewtopic.php?t=31288
-
http://www.pirate4x4.com/forum/showthread.php?t=804874&highlight=1991+red+yj+hp60+14+welded+38s+banger+5speed+1983 (http://www.pirate4x4.com/forum/showthread.php?t=804874&highlight=1991+red+yj+hp60+14+welded+38s+banger+5speed+1983)
-
Man what a deal. :o
-
http://atlanta.craigslist.org/pts/1293881341.html
-
http://atlanta.craigslist.org/pts/1293881341.html
I'll just wait until he goes to $150, lol
-
http://columbusga.craigslist.org/pts/1291288603.html
-
http://columbusga.craigslist.org/pts/1291288603.html
Done got deleted.
-
Dang, it was a set of 35" Geolander MTs for $100.
-
Dang, it was a set of 35" Geolander MTs for $100.
4-Yokohama MT+ Tires 35x12.5x15 - $100
-
http://atlanta.craigslist.org/pts/1302126674.html
-
Thats only for 2
-
Damn, wasn't paying attention, they must be made of gold then!
-
I know somebody needs a good tow rig... http://forum.gon.com/showthread.php?t=385741
-
good deal on a tow pig
-
A good start http://atlanta.craigslist.org/cto/1303278965.html
-
http://atlanta.craigslist.org/cto/1303237144.html
-
http://honolulu.craigslist.org/oah/pts/1286126420.html
http://salem.craigslist.org/cto/1261945323.html
just a few that i have found first one is kinda iffy ...
second one is just weird
-
:D :D :D on the first one
Dana 37 wow. :bs)
-
"or i can do something else in return ..."
nice.
-
http://forum.gon.com/showthread.php?t=387251
-
http://atlanta.craigslist.org/pts/1307951953.html
-
http://atlanta.craigslist.org/pts/1307746790.html
-
http://forum.gon.com/showthread.php?t=387251
Dude has some camber issues!
-
Attention Ryan:
http://forum.gon.com/showthread.php?t=387374
-
http://atlanta.craigslist.org/pts/1308879952.html
-
http://atlanta.craigslist.org/pts/1308879952.html
i smell some free 8.8s...
-
edit: SCREW YOU JIMMY. {no}
-
http://seattle.craigslist.org/skc/rvs/1309574769.html
http://www.craigslist.org/about/best/nsh/1211169953.html
http://www.craigslist.org/about/best/wma/1251516061.html
-
Dibs on the swing! {hihi}
-
http://forum.gon.com/showthread.php?t=387374
Jimmy beat you to it. {toast}
-
http://macon.craigslist.org/pts/1314499146.html
-
http://macon.craigslist.org/pts/1314499146.html
wow really? thats crap. :bs)
-
http://atlanta.craigslist.org/eat/cto/1316697599.html
-
Dang, that would make a sweet project!
-
http://atlanta.craigslist.org/nat/pts/1317325461.html
http://atlanta.craigslist.org/nat/pts/1316722388.html
http://atlanta.craigslist.org/nat/pts/1316613446.html
http://atlanta.craigslist.org/pts/1316280541.html
http://atlanta.craigslist.org/pts/1315857357.html
-
Perfect...
http://atlanta.craigslist.org/ctd/1311816988.html
http://atlanta.craigslist.org/cto/1310526539.html
-
Dang, that would make a sweet project!
Yeah I wish I had the extra cash I would so love to cut into that thing.
-
http://atlanta.craigslist.org/cto/1277761622.html
-
http://atlanta.craigslist.org/cto/1277761622.html
"this jeep will do anything you ask it to"
LOL!!!
-
I like the fact that I could get it and finally have my own possy toi follow me around! "possy rear end" :D
-
I like the fact that I could get it and finally have my own possy toi follow me around! "possy rear end" :D
The guys that hung around rough customs were a "special" breed. That being said, I did let them do some work to my Jeep right after I bought it.
-
http://atlanta.craigslist.org/nat/pts/1317510607.html {drool}
-
lol, what a moron... http://chattanooga.craigslist.org/pts/1318978800.html
I am the 4x4 Guru. E-mail me and tell me what you need for your 4x4 and I
guarantee you that I will find the best one out there for the cheapest price. I
am talking about anything: complete drive shafts, drive shaft parts, universal joints,
axle joints, axle shafts, lockers, spider gears, differentials, ring gears and pinions,
complete axles, tires, wheels, hubs, wheel spacers, transfer cases, suspension parts, etc.
Here is what you do. E-mail me what you are looking for. I will track
it down and and get back to you as soon as I can, usually within 24-48 hours.
If you don't want what I have found, just say no, or I need it different,
or whatever you want.
For an example, e-mail me and say "Hey, I need a u-joint for the pinion
yoke on my Dana 44 front shaft in a 1995 Jeep Grand Cherokee." I will
go through all my connections and at the end of the day, I will let you
know, "I got one, its $15.00" or "I tried like hell and I just cannot find it."
Once I do find the part you need, if it is a used part, I will try my
best to get you some pictures of it before I get back to you.
I am like a rolling 4 Wheel Parts store, except I know what I
am talking about, and I know where to find the best used stuff around. So,
give me a hollar and try me out.
E-mail me at: 4x4guru@gmail.com and let me know what you need.
Someone needs to email him and mess with him.
-
I seen that and was thinking the same thing
-
I seen that and was thinking the same thing
X2
-
I will post up his reply when I get it.
-
I will post up his reply when I get it.
lol, what did you ask him to find?
-
I will post up his reply when I get it.
lol, what did you ask him to find?
yea. Post up your email to him, if you don't mind.
-
Well hell, I was gonna suggest for you to email him Jimmy, but I'm sure Richard's is pretty good too. We'll see.........if he ever posts it.
-
Someone needs to email him and mess with him.
Like "Hey, I need a u-joint for the pinion yoke on my Dana 44 front shaft in a 1995 Jeep Grand Cherokee."
-
ha ha!
-
8.8, $50.00!!!!! :o http://atlanta.craigslist.org/nat/pts/1320152869.html
-
4.0 HO $175
http://atlanta.craigslist.org/nat/pts/1318328216.html
Hopefully Larry will see this, his cousin was talking about needing one this afternoon.
-
4.0 HO $175
http://atlanta.craigslist.org/nat/pts/1318328216.html
Hopefully Larry will see this, his cousin was talking about needing one this afternoon.
On it like white on rice
-
good deal on diy beadlocks set of 4
http://www.atozfabrication.com/store/catalog/Weld-On-Bead-Lock-Kits-for-Steel-Wheels-p-16169.html
-
good deal on diy beadlocks set of 4
http://www.atozfabrication.com/store/catalog/Weld-On-Bead-Lock-Kits-for-Steel-Wheels-p-16169.html
That is a good deal. Other than them wanting $100 dollars for the hardware. {ehm} Might have to give them a call to see if they will work on that hardware price.
-
good deal on diy beadlocks set of 4
http://www.atozfabrication.com/store/catalog/Weld-On-Bead-Lock-Kits-for-Steel-Wheels-p-16169.html
That is a good deal. Other than them wanting $100 dollars for the hardware. {ehm} Might have to give them a call to see if they will work on that hardware price.
I just priced it out on Fastenal. Using Grade 8 stuff its $120 for nylock nuts, bolts, and washers. Grade 5 was right around $100. So depending on the grading of the hardware, its fair.
-
http://www.summitracing.com/parts/AEO-54-500007/ I wasn't sure never really priced the hardware. I was just comparing it to these.
-
That kit only has 18 bolts per rim, but thats not a bad price. 18 bolts would probably be enough, thats what most drag race beadlocks use.
-
Yeah thats the ones the guys that I ride with run. They love them and not so many bolts to torx.
-
Yeah, sitting there and bolting down 128 bolts would suck.
-
The summit ones do come out cheaper with tax it like 225 for a set of 4. I just hate yellow guess you could paint them. I prob get the a to z diy kit and just take my bolts from work cheaper for me
-
The summit ones do come out cheaper with tax it like 225 for a set of 4. I just hate yellow guess you could paint them. I prob get the a to z diy kit and just take my bolts from work cheaper for me
I will be sure a let Chris know. {nln} ;D
-
Would make a good tow pig http://atlanta.craigslist.org/sat/cto/1316675128.html
-
http://atlanta.craigslist.org/nat/cto/1322912058.html
-
Bet you could get it for 2 grand cash.
You should buy it michael and ud have the tires you want for the jeep too
-
http://atlanta.craigslist.org/nat/cto/1322912058.html
$500 with no title, a bad transmission, and electrical problems? And the guy is firm on the price, yet needs it gone today? I think that'll sit in his yard for a while.
-
Would make a good tow pig http://atlanta.craigslist.org/sat/cto/1316675128.html
The exact truck I want... Damn being in college and being broke. :bs)
-
dude , im out of college and still broke!
-
I call :bs) on the XJ. I bet that is not the Jeep.
-
http://atlanta.craigslist.org/atl/cto/1322549375.html
I know someone wants to buy this for the Moab trip.
-
http://atlanta.craigslist.org/nat/pts/1326813327.html
-
http://atlanta.craigslist.org/nat/pts/1326813327.html
{ehm} {popcorn}
-
I figured Ryan would want them. :D
-
I figured Ryan would want them. :D
The perfect vehicle for Ryan was over at my house tonight. My roommates friend has a Silverado with 14 inches of lift and 39's ::)
-
http://atlanta.craigslist.org/atl/cto/1322549375.html
I know someone wants to buy this for the Moab trip.
DOUG
-
http://atlanta.craigslist.org/atl/cto/1322549375.html
I know someone wants to buy this for the Moab trip.
DOUG
Most definitely, but I'll need Alberts dually and air bags to haul that one. it would be perfect, and oh what a deal! All I have is a gas Tahoe and a Mini Van. :hlp
-
I figured Ryan would want them. :D
The perfect vehicle for Ryan was over at my house tonight. My roommates friend has a Silverado with 14 inches of lift and 39's ::)
{nln}
-
I figured Ryan would want them. :D
The perfect vehicle for Ryan was over at my house tonight. My roommates friend has a Silverado with 14 inches of lift and 39's ::)
{nln}
{hardlaugh} {hardlaugh} {hardlaugh} {hardlaugh}
-
http://atlanta.craigslist.org/atl/cto/1322549375.html
I know someone wants to buy this for the Moab trip.
DOUG
Most definitely, but I'll need Alberts dually and air bags to haul that one. it would be perfect, and oh what a deal! All I have is a gas Tahoe and a Mini Van. :hlp
you might need a medium duty just to be legal with the weight rating on that thing...esp with 3 heavy jeeps on it
-
http://atlanta.craigslist.org/atl/pts/1327362680.html
http://atlanta.craigslist.org/nat/pts/1327290838.html :o
-
http://atlanta.craigslist.org/atl/pts/1320911289.html
-
A good budy of mine is selling his jeep.
http://atlanta.craigslist.org/nat/cto/1331210159.html
-
{eek} MAN THAT IS WORTH IT ALL DAY!!!!!!!!!!
-
x2 Thats a ton of rig for the money.
-
I wish I had the money
-
Me too! Man, what a deal! :'(
-
http://atlanta.craigslist.org/nat/pts/1332015655.html
-
http://atlanta.craigslist.org/nat/pts/1332015655.html
:PV {drool} {bling}{letseat}
-
Someone email this guy, if he accidentally put an extra zero behind the price, buy it and I will buy it from you next may for $1000 :D
http://forum.gon.com/showthread.php?t=395375
I know fastbacks are getting harder to find, but this man must be smoking some killer herb to think that jalopy is worth 8 grand.
-
w/o engine & trans, no thanks! Still needs to spend a year in a body shop too.
-
he has the same type shop I do. :D
-
Looks like it would make a good conversation piece thats about it. :o
-
I have all the other stuff to swap onto it, that body is just in better shape than mine.
-
$3000 top offer.
-
http://atlanta.craigslist.org/atl/pts/1333923090.html
perfect builder!!!!!!!!
-
Killer motor swap potential: http://forum.gon.com/showthread.php?t=395918
-
theres a guy on naxja hes located in NC and is giving away a 96 XJ. no motor rear axle ratty inside big hole in flor i assume its rust. its free and he needs it gone by the first. i guess you can get in touch with me and i'll pass on his info for you.
and heres another XJ that someone is parting out
http://atlanta.craigslist.org/nat/pts/1334456269.html
-
http://macon.craigslist.org/pts/1335589703.html
-
http://macon.craigslist.org/pts/1335589703.html
Daniel
-
http://macon.craigslist.org/pts/1335589703.html
There is a 44 in SC for $250.if anyone is interested.
-
http://pirate4x4.com/forum/showthread.php?t=813919
-
http://macon.craigslist.org/pts/1335589703.html
Daniel
You wanna get it for me Mark? ;D Then I'll pay ya back.
-
Here you go Ryan.
http://atlanta.craigslist.org/eat/pts/1337178189.html
-
V8 {letseat}
http://atlanta.craigslist.org/nat/cto/1338839149.html (http://atlanta.craigslist.org/nat/cto/1338839149.html)
-
rockwells: http://www.southernjeeps.org/phpbb/viewtopic.php?t=31648 (http://www.southernjeeps.org/phpbb/viewtopic.php?t=31648)
{drool}
-
V8 {letseat}
http://atlanta.craigslist.org/nat/cto/1338839149.html (http://atlanta.craigslist.org/nat/cto/1338839149.html)
No short cuts taken {ehm} D30 & D35 {no} {no} {no} {no} {no}
-
I was thinking the same thing Mark. Can you say exploded. {hihi}
-
I was thinking the same thing Mark. Can you say exploded. {hihi}
The first few minutes would be a blast though. ;D {hihi} ;D
-
http://www.southernjeeps.org/phpbb/viewtopic.php?t=31673
-
That v8 cherokee don't put out that much power... 305 :P But, why put all that into it and leave the drivetrain? {ehm}
-
http://bb.tennesseeoffroad.com/ubb/ultimatebb.php?ubb=get_topic;f=42;t=008830
-
http://bb.tennesseeoffroad.com/ubb/ultimatebb.php?ubb=get_topic;f=42;t=008830
its a secret unless you are a member...
-
http://bb.tennesseeoffroad.com/ubb/ultimatebb.php?ubb=get_topic;f=42;t=008830
its a secret unless you are a member...
It's free, join. {nln}
http://atlanta.craigslist.org/wat/pts/1342331470.html
-
14 BOLT!!!!!!
http://atlanta.craigslist.org/nat/pts/1345895674.html
-
14 BOLT!!!!!!
http://atlanta.craigslist.org/nat/pts/1345895674.html
That thing must be made of gold! You can find them all day long at the PAPs & on Pirate for $150.
-
By the time I drove to a pap and back home or paid for shipping to my house I would have over 325 in one.
-
I call :bs) on the XJ. I bet that is not the Jeep.
How much?
-
By the time I drove to a pap and back home or paid for shipping to my house I would have over 325 in one.
Not everybody lives out in the sticks {nln} :D
And if it takes you $175 in fuel to get to Norcross and back, then those Duramaxes are crappier than I thought {nln2}
I like the multiple flip off smileys now, I can be sarcastic in a post twice without getting repetitive!
-
I call :bs) on the XJ. I bet that is not the Jeep.
How much?
I'll get in on that! I'll put down a bill.
-
hey jimmy here you go since you forgot about this one,....
{nln2} {nln} {nln1}
-
Not everybody lives out in the sticks {nln} :D
And if it takes you $175 in fuel to get to Norcross and back, then those Duramaxes are crappier than I thought {nln2}
I like the multiple flip off smileys now, I can be sarcastic in a post twice without getting repetitive!
OK it is only 202 miles round trip. $28 in fuel. {nln2} I was happy in my delusion that the PAP was realy far away now I am going to have to go down there and roam around. :hlp
-
haha, you're welcome Larry!
-
Rubi 44s cheaper than I will ever sell mine ;)
http://www.jeepforum.com/forum/f126/front-rear-rubicon-44s-800288/
-
http://cgi.ebay.com/ebaymotors/Complete-1979-Ford-Dana-60-Front-Axle-Jeep-YJ-TJ-OHIO_W0QQitemZ120462995516QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item1c0c27703c&_trksid=p4506.c0.m245
-
Look at his questions, classic!
Q: how much the shipping to laredo,tx. 78040? thanks
A: I have determined that $1,437.69 is the best I can do regarding shipping it. Learn to read...it will save you from future insults. Thanks, Roy
Q: is this axle shortened to fit a TJ and dose it have the correct brackets for direct bolt up
A: No. Please stop breathing my air.
-
Look at his questions, classic!
Q: how much the shipping to laredo,tx. 78040? thanks
A: I have determined that $1,437.69 is the best I can do regarding shipping it. Learn to read...it will save you from future insults. Thanks, Roy
Q: is this axle shortened to fit a TJ and dose it have the correct brackets for direct bolt up
A: No. Please stop breathing my air.
He is saying what we have all wanted to at sometime! ;D
-
Couldn't have guessed where he hangs out before this post, huh? I like this guy :D
Q: What is the WMS to WMS?
A: 69.25" This is a good resource for Dana 60 sepcifications: http://www.pirate4x4.com/tech/billavista/60_front/ Thanks, Roy
-
Detroit EZ Lockers $100 each! http://www.pirate4x4.com/forum/showthread.php?t=804210
I know someone here needs them for the 8.8 or 44!
-
Dana44 FW
http://www.southernjeeps.org/phpbb/viewtopic.php?t=31774&highlight=
-
http://atlanta.craigslist.org/atl/cto/1354783354.html
-
http://atlanta.craigslist.org/atl/cto/1354783354.html
I've seen that rig in person. {peek} I wouldn't give him $1000 for it. I was scared just standing close to it. {hihi}
-
http://atlanta.craigslist.org/nat/pts/1359088748.html
-
MJ
http://gadsden.craigslist.org/cto/1355328919.html
-
http://www.georgiapacking.org/forum/viewtopic.php?f=32&t=32435
Sounds like a quick cheap fix.
-
37x12.50x16.5 for $75 ea:
http://pirate4x4.com/forum/showthread.php?t=779576 (http://pirate4x4.com/forum/showthread.php?t=779576)
-
Ryan, your dream Jeep!
"-rear suspension, Skyjacker 6" RR springs, 2" Daystar shackles, 3" blocks "
http://atlanta.craigslist.org/atl/cto/1379853031.html
-
Ryan, your dream Jeep!
"-rear suspension, Skyjacker 6" RR springs, 2" Daystar shackles, 3" blocks "
http://atlanta.craigslist.org/atl/cto/1379853031.html
dude-- i'd wheel the $h1t out of that thing!!!!! {letseat} and then flop! {boohoo}
-
Only $105,000. Wait, no, that's correct.
http://www.pirate4x4.com/forum/showthread.php?t=817931 (http://www.pirate4x4.com/forum/showthread.php?t=817931)
(http://www.pirate4x4.com/forum/attachment.php?attachmentid=464674&stc=1&d=1252348297)
-
Only $105,000. Wait, no, that's correct.
http://www.pirate4x4.com/forum/showthread.php?t=817931 (http://www.pirate4x4.com/forum/showthread.php?t=817931)
(http://www.pirate4x4.com/forum/attachment.php?attachmentid=464674&stc=1&d=1252348297)
{bling} {bling} {bling} I WANT!!!!!... Wonder if I can get a student loan for it? :D
-
Only $105,000. Wait, no, that's correct.
http://www.pirate4x4.com/forum/showthread.php?t=817931 (http://www.pirate4x4.com/forum/showthread.php?t=817931)
(http://www.pirate4x4.com/forum/attachment.php?attachmentid=464674&stc=1&d=1252348297)
bad ass. worth every penny.
-
Think he'd take organs as a trade? I've got an extra kidney I don't need at the moment.
-
I dont think its worth the money.. Its bad ass and all but not 105,000 bad ass.. Regardless of how much it cost to build.. Just my .02.
I'll take my ranger and the cash. {toast}
-
http://macon.craigslist.org/pts/1383466457.html {popcorn}
-
HAHAHA. I hope someone buys it.
-
http://chattanooga.craigslist.org/cto/1372956926.html
Cheap axle and transfer case upgrade...
-
http://atlanta.craigslist.org/nat/rvs/1391155543.html
Someone buy that for me. I'll even go pick it up...
-
Hot damn, how much did he pay for it new? :o
-
Ad says $70k
-
::) alotta dough for some aluminum. Nice, but no thanks!
-
http://atlanta.craigslist.org/atl/pts/1389413328.html TJ full soft doors
http://atlanta.craigslist.org/atl/pts/1389026380.html wheels and tires, good deal!
http://atlanta.craigslist.org/atl/pts/1388535617.html great soft top deal!
-
Here ya go, my next door neighbors truck.
http://statesboro.craigslist.org/cto/1386791967.html
Complete with front and rear lift blocks and enough axle wrap that every time you romp on it it blows a u-joint.
-
http://macon.craigslist.org/pts/1395547597.html {popcorn} {popcorn} {popcorn} {popcorn}
-
http://macon.craigslist.org/pts/1394940930.html
-
http://macon.craigslist.org/cto/1397111838.html
-
http://macon.craigslist.org/cto/1396986681.html
-
http://macon.craigslist.org/cto/1396460296.html
-
http://macon.craigslist.org/cto/1396176668.html
-
http://macon.craigslist.org/cto/1395913274.html price seems high
-
http://denver.craigslist.org/bar/1398158266.html
-
http://denver.craigslist.org/bar/1398158266.html
Not sure if I should say "what?" or "Awesome!". You know you want him in your fraternity house Ben!
-
http://denver.craigslist.org/bar/1398158266.html
Not sure if I should say "what?" or "Awesome!". You know you want him in your fraternity house Ben!
We got enough pets. Plus, I'm not sure if this guy is serious or not.
-
http://atlanta.craigslist.org/atl/cto/1398879199.html
-
Might already be on here, but don't feel like looking
http://atlanta.craigslist.org/atl/cto/1395376116.html
-
cheap axles {letseat} http://tallahassee.craigslist.org/cto/1399349952.html
-
http://forum.gon.com/showthread.php?t=417466
-
http://forum.gon.com/showthread.php?t=417466
its ugly, but bad ass.
-
thats what my wife said.. I would buy it in a heart beat
-
http://atlanta.craigslist.org/atl/cto/1399007727.html
-
http://atlanta.craigslist.org/atl/cto/1400527977.html
-
i've seen this a billion times, on CL and its still for sale. i might have to buy me a waggy :P
http://atlanta.craigslist.org/nat/cto/1379579463.html
-
HEY WILL !! ;D
http://atlanta.craigslist.org/atl/pts/1408657726.html
-
HEY WILL !! ;D
http://atlanta.craigslist.org/atl/pts/1408657726.html
Very funny ;D
-
HEY WILL !! ;D
http://atlanta.craigslist.org/atl/pts/1408657726.html
Very funny ;D
I haven't picked at you in a while. See ya Friday. ;D
-
http://atlanta.craigslist.org/atl/cto/1409353368.html {letseat}
-
http://atlanta.craigslist.org/atl/cto/1409353368.html {letseat}
That's freakin' awesome. Those seats look like total comfort....
I don't even get to wheel what I have ???
-
http://atlanta.craigslist.org/atl/cto/1413339704.html
-
http://atlanta.craigslist.org/atl/cto/1413339704.html
Seen that at Morris Mountain a time or two, cool beast!
-
http://atlanta.craigslist.org/atl/cto/1413339704.html
$230,000? ROFLMAO!
-
^ I'd say he accidently through an extra 0 on the end.
-
http://atlanta.craigslist.org/sat/pts/1418369198.html
-
http://atlanta.craigslist.org/eat/bar/1420915115.html
76 f100 4x4 $1000
D44/9"
-
Good Deal on a Millermatic
http://atlanta.craigslist.org/atl/tls/1415539288.html
-
http://forum.gon.com/showthread.php?t=425907
-
here you go jimmy good price
http://forum.gon.com/showthread.php?t=425932
-
here you go jimmy good price
http://forum.gon.com/showthread.php?t=425932
Damn I don't need anymore projects, but that is tempting.
-
purdy! I still got one to fix though!
-
purdy! I still got one to fix though!
If I wasn't worried about losing my shop in the divorce, I'd prob. go look at it in the morning.
-
hahahaha right Mark...
-
http://atlanta.craigslist.org/wat/pts/1423794322.html (http://atlanta.craigslist.org/wat/pts/1423794322.html)
D44 $250
-
http://forum.gon.com/showthread.php?t=425907
he doesnt have a number
-
http://forum.gon.com/showthread.php?t=425907
he doesnt have a number
pm him I can pick them up for you if you paypal me the money
-
im not a member, i think i should join though
-
I went to look at this jeep yesterday and was gonna trade for it until I seen it in person. It does a 44 rear but has 30 front and it's in the worst condition of any jeep I've ever seen. It's only worth about 3500. Big rust holes, ripped top, no needles or cover on the gauge cluster, rock rash everywhere, pouring axle dope, no front driveshaft, no front bumper, stock brakelines and control arms, the body lift has nearly been beaten through the floors, black tape over the warning lights, and would barely even crank. http://atlanta.craigslist.org/nat/cto/1406737951.html
-
Millermatic 185
http://atlanta.craigslist.org/atl/tls/1431432440.html
-
TUBE BENDER!!!
MARK!!! CALL JOHN NOW!!
WE NEED THIS!!!!
http://www.southernjeeps.org/phpbb/viewtopic.php?t=32262&highlight=&sid=0c80237380f63fc967ca28515372d1f3 (http://www.southernjeeps.org/phpbb/viewtopic.php?t=32262&highlight=&sid=0c80237380f63fc967ca28515372d1f3)
-
TUBE BENDER!!!
MARK!!! CALL JOHN NOW!!
WE NEED THIS!!!!
http://www.southernjeeps.org/phpbb/viewtopic.php?t=32262&highlight=&sid=0c80237380f63fc967ca28515372d1f3 (http://www.southernjeeps.org/phpbb/viewtopic.php?t=32262&highlight=&sid=0c80237380f63fc967ca28515372d1f3)
Sold, I guess that means I won't get to borrow it. What's up John, you going to stick to midlife crisis cars or get another Heep?
{toast}
-
TUBE BENDER!!!
MARK!!! CALL JOHN NOW!!
WE NEED THIS!!!!
http://www.southernjeeps.org/phpbb/viewtopic.php?t=32262&highlight=&sid=0c80237380f63fc967ca28515372d1f3 (http://www.southernjeeps.org/phpbb/viewtopic.php?t=32262&highlight=&sid=0c80237380f63fc967ca28515372d1f3)
Sold, I guess that means I won't get to borrow it. What's up John, you going to stick to midlife crisis cars or get another Heep?
{toast}
Oh well. Allsouth has a brand new one, but it's not Hydraulic like John's was. ???
-
Oh well. Allsoouth has a brand new one, but it's not Hydraulic like John's was. ???
[/quote]
{no} -- DUDE, you are obsessed with allsouth, whats the deal {ehm} -- 3:)
-
{no} -- DUDE, you are obsessed with allsouth, whats the deal {ehm} -- 3:)
:D I've been living there lately!
{btt}
http://atlanta.craigslist.org/nat/ctd/1434565743.html (http://atlanta.craigslist.org/nat/ctd/1434565743.html)
-
http://atlanta.craigslist.org/sat/cto/1440831773.html
Part it out and you could end up with a set of 1/2tons for next to nothing.
-
Truggy
http://atlanta.craigslist.org/atl/cto/1440694742.html
-
Truggy
http://atlanta.craigslist.org/atl/cto/1440694742.html
HUH???
This trail rig and was done right............
front axle is Dana 60 with 488 gears Lincoln locked, rear axle is 14 bolt with 513 gears Detroit lockers,
wheels are Bart’s bead lock, front tires are 42 inch tsl crosscut, rear tires are 44 inch boggers
-
Truggy
http://atlanta.craigslist.org/atl/cto/1440694742.html
HUH???
This trail rig and was done right............
front axle is Dana 60 with 488 gears Lincoln locked, rear axle is 14 bolt with 513 gears Detroit lockers,
wheels are Bart’s bead lock, front tires are 42 inch tsl crosscut, rear tires are 44 inch boggers
{hihi} {hardlaugh} {hihi} {hardlaugh}
it mght work out to where the gear ratio for a 42 on 4.88s is the same as a 44 on 5.13s but thats still funny.
-
Truggy
http://atlanta.craigslist.org/atl/cto/1440694742.html
HUH???
This trail rig and was done right............
front axle is Dana 60 with 488 gears Lincoln locked, rear axle is 14 bolt with 513 gears Detroit lockers,
wheels are Bart’s bead lock, front tires are 42 inch tsl crosscut, rear tires are 44 inch boggers
{hihi} {hardlaugh} {hihi} {hardlaugh}
it mght work out to where the gear ratio for a 42 on 4.88s is the same as a 44 on 5.13s but thats still funny.
Yeah thats what alot of people are doing on there buggies. The guy that rides with us in the one ton red buggy had his buggy setup like that for a long time. Until a few months ago when he matched the gears and put 44 all the way around it. Doing that just helps with weight and stress on the front axle when there hitting rocks and climbs hard all the time and bouncing the front ends.
-
Think back to Tellico Doug, the one weekend I got to ride it I saw a handfull of them up on the Mountain. It's a common practice.
-
Think back to Tellico Doug, the one weekend I got to ride it I saw a handfull of them up on the Mountain. It's a common practice.
Really. Hmmmm. Didn't notice. Was focused on somebody's rear driveshaft and tug a war up the mountain! :D :D
-
Mark, I remember. Those things were tearing up the ground like crazy. >:( It was a good day though. Anyday at tellico was a good day! :'(
-
Think back to Tellico Doug, the one weekend I got to ride it I saw a handfull of them up on the Mountain. It's a common practice.
Really. Hmmmm. Didn't notice. Was focused on somebody's rear driveshaft and tug a war up the mountain! :D :D
Yea, I had plenty of time to look around, Mile Markers are good but slow! ;D
-
http://atlanta.craigslist.org/sat/pts/1422531124.html
Drivers drop 44 housing and knuckles for $50
-
http://atlanta.craigslist.org/nat/pts/1449400481.html
-
http://atlanta.craigslist.org/sat/pts/1451788536.html {ehm}
-
http://atlanta.craigslist.org/sat/pts/1451788536.html {ehm}
what a F***TARD.
wonder how long before this post gets deleted...
-
http://atlanta.craigslist.org/sat/pts/1451788536.html {ehm}
If someone buys that, I have some beach from property in Idaho for sale!
-
http://atlanta.craigslist.org/sat/pts/1451788536.html {ehm}
If someone buys that, I have some beach from property in Idaho for sale!
REALLY!?!?!?
i'll take them both. {hihi}
-
Glad I'm not the only one that got a kick out it when I read it this morning. {hihi} He also posted it on GON. {;-(}
-
What he read was probably someone mocking it.
-
But it's rare right? {hihi}
-
http://atlanta.craigslist.org/sat/pts/1451788536.html {ehm}
thats the most rhetorical thing i've read on CL to date.
-
http://atlanta.craigslist.org/atl/cto/1446524125.html
-
http://atlanta.craigslist.org/atl/cto/1446524125.html
Isn't that "big94yj" that went on a ride or two with us? Looks like a GATR banner on the windshield.
-
http://atlanta.craigslist.org/atl/cto/1446524125.html
Isn't that "big94yj" that went on a ride or two with us? Looks like a GATR banner on the windshield.
I'm not for sure whose YJ it is, I just know it had the GATR Banner so I figured I'd post it here.
-
http://atlanta.craigslist.org/atl/cto/1446524125.html
Isn't that "big94yj" that went on a ride or two with us? Looks like a GATR banner on the windshield.
i think that is justin's jeep.
-
didn't jk's have 3.8's?
http://atlanta.craigslist.org/atl/ctd/1458969065.html
-
didn't jk's have 3.8's?
http://atlanta.craigslist.org/atl/ctd/1458969065.html
That guy is a friend of Ryan's, now it should make since. ;D
-
A good deal http://atlanta.craigslist.org/atl/cto/1460055544.html
-
Atlas II http://www.rockhardxj.com/viewtopic.php?f=9&t=3061
-
Richard !! These are calling you: http://www.rockhardxj.com/viewtopic.php?f=9&t=3059
-
A good deal http://atlanta.craigslist.org/atl/cto/1460055544.html
You don't want to touch this one. {no} I was on a ride before and seen this rig and I didn't even like being on the same trials as this rig. This thing was pieced together with duct tape and zipties. {;-(}
-
A good deal http://atlanta.craigslist.org/atl/cto/1460055544.html
You don't want to touch this one. {no} I was on a ride before and seen this rig and I didn't even like being on the same trials as this rig. This thing was pieced together with duct tape and zipties. {;-(}
If it sounds to good to be true, it usually is. thanks for the info on it.
-
http://atlanta.craigslist.org/atl/rvs/1462041216.html
-
A good deal http://atlanta.craigslist.org/atl/cto/1460055544.html
You don't want to touch this one. {no} I was on a ride before and seen this rig and I didn't even like being on the same trials as this rig. This thing was pieced together with duct tape and zipties. {;-(}
Hmmm. I might have to go against ya on that one. If it runs and drives, it's cheaper than a good golf cart! :D :D
-
A good deal http://atlanta.craigslist.org/atl/cto/1460055544.html
You don't want to touch this one. {no} I was on a ride before and seen this rig and I didn't even like being on the same trials as this rig. This thing was pieced together with duct tape and zipties. {;-(}
Hmmm. I might have to go against ya on that one. If it runs and drives, it's cheaper than a good golf cart! :D :D
Yeah but trust me Doug you would feel much safer in a golf cart. {hihi}
-
Richard !! These are calling you: http://www.rockhardxj.com/viewtopic.php?f=9&t=3059
I will sign up over there and see where hes located
-
http://chattanooga.craigslist.org/cto/1476982119.html
I most be over looking something on this rig. {ehm} Maybe its a custom Boyd Coddington camo paint job. :bs) {hihi}
-
^
^
^
^
^
linkie no workie
-
^
^
^
^
^
linkie no workie
i dont think it matters when i looked at the ad yesterday it was deleted
-
http://forum.gon.com/showthread.php?t=446861
-
http://forum.gon.com/showthread.php?t=446861
Good price.
-
half doors
http://atlanta.craigslist.org/atl/pts/1486975065.html (http://atlanta.craigslist.org/atl/pts/1486975065.html)
beadlocks
http://atlanta.craigslist.org/nat/pts/1486780670.html (http://atlanta.craigslist.org/nat/pts/1486780670.html)
sahara seats
http://atlanta.craigslist.org/atl/pts/1485923601.html (http://atlanta.craigslist.org/atl/pts/1485923601.html)
jk44 diff covers
http://atlanta.craigslist.org/nat/pts/1485857844.html (http://atlanta.craigslist.org/nat/pts/1485857844.html)
warn 8000i
http://atlanta.craigslist.org/wat/pts/1477634463.html (http://atlanta.craigslist.org/wat/pts/1477634463.html)
-
http://atlanta.craigslist.org/atl/cto/1490658156.html
30' 2 car bumper trailer $3500
-
Oh snap...
http://atlanta.craigslist.org/atl/cto/1320359098.html (http://"http://smouch.net/lol/")
-
beadlocks
http://atlanta.craigslist.org/nat/pts/1486780670.html (http://atlanta.craigslist.org/nat/pts/1486780670.html)
Awesome, right deal at the right time. I'll now be rocking a set of bead locks after Christmas. {toast}
-
Not craigslist, but still pretty cool...
http://hennessympg.com/inventory/detailsused.aspx?s=u&id=NLGA0005.1/GV27678&d=Chevrolet&m=D30&y=1986 (http://hennessympg.com/inventory/detailsused.aspx?s=u&id=NLGA0005.1/GV27678&d=Chevrolet&m=D30&y=1986)
1986 D30 Diesel 4x4
And they've got more stuff similar to it. I've test drove one of these- they run and drive well.
-
i like how they show the OD and say it only has 65k miles or on 1 it has 12k miles on it... try like 200k+ miles on it.. that thing is over 20yrs old and trust me it has rolled over atleast once...
And I cant believe they are selling these things... the EIU that you have to sign after buying them at action.. (Military can not trade) at a dealership. Maybe I should make a phone call... hmmm
-
Man Id love to have one of them old trucks. I can picture it one mean fullsize truggy couldn't see paying 3 grand for it but would still like to have one. {letseat}
-
Man Id love to have one of them old trucks. I can picture it one mean fullsize truggy couldn't see paying 3 grand for it but would still like to have one. {letseat}
My thoughts exactly
-
UNBELIEVABLE! Needs work, but a rig for $800!
http://www.southernjeeps.org/phpbb/viewtopic.php?t=32167&postdays=0&postorder=asc&start=10 (http://www.southernjeeps.org/phpbb/viewtopic.php?t=32167&postdays=0&postorder=asc&start=10)
-
http://atlanta.craigslist.org/atl/cto/1492791166.html
-
http://atlanta.craigslist.org/atl/cto/1492791166.html
That's Do Work's Buddy.
-
I think those axles have been under 3 different XJs over the last few months too, lol.
-
Yeah thats Chucks XJ hes a member on here. No he got them axles out of a truck one of our buddies had and had another guy he knows build them. This is one XJ that gets down though would make someone a great rig. {letseat}
-
Oh, I've seen a pair of those axles floating around that have been bought and sold a couple times over the past 2 months or so.
-
Yeah I think I have ran across them to. Hes had his under his Jeep for about a 1 yr now and have been holding up very good. {toast}
-
http://atlanta.craigslist.org/atl/zip/1511551743.html
Free wrecked Running 91 1500
-
Sounds like a good deal.
http://atlanta.craigslist.org/atl/cto/1515495083.html
-
Sounds like a good deal.
http://atlanta.craigslist.org/atl/cto/1515495083.html
says YJ, but that's a TJ i the pic....
-
Sounds like a good deal.
http://atlanta.craigslist.org/atl/cto/1515495083.html
says YJ, but that's a TJ i the pic....
You better put your glasses on. I see square headlights.
-
Sounds like a good deal.
http://atlanta.craigslist.org/atl/cto/1515495083.html
says YJ, but that's a TJ i the pic....
You better put your glasses on. I see square headlights.
You're right, my mistake.
Damn small pictures, had to blow it up to be sure.
-
Tow Rig
http://atlanta.craigslist.org/eat/cto/1519010348.html
-
Tow Rig
http://atlanta.craigslist.org/eat/cto/1519010348.html
{bling}
-
Tow Rig
http://atlanta.craigslist.org/eat/cto/1519010348.html
No turbo, no power.
-
Tow Rig
http://atlanta.craigslist.org/eat/cto/1519010348.html
No turbo, no power.
easy fix. 6.5 turbo/manifold is a bolt on affair iirc.
-
And you could probaly walk away with it for under $2000.
-
Says "Jeeper Reeper" on the windshield, but he wants to trade for an XJ.
http://detroit.craigslist.org/wyn/cto/1524512370.html
-
Says "Jeeper Reeper" on the windshield, but he wants to trade for an XJ.
http://detroit.craigslist.org/wyn/cto/1524512370.html
'
Because you can own an xj and still not catch that Jeep thing. I mean I own one and it still doesn't burn when I pee. {nln} {nln}
j/k though man, read the ad. He needs a family hauler and wants a wj it sounds like.
-
Sweet find.
http://atlanta.craigslist.org/atl/pet/1527232216.html
-
Sweet find.
http://atlanta.craigslist.org/atl/pet/1527232216.html
wtf? haha.
-
good deal
http://robinsyardsales.com/item.jsp?itemId=13017416&src=SEARCH
-
http://robinsyardsales.com/item.jsp?itemId=12930871&src=SEARCH
-
http://robinsyardsales.com/item.jsp?itemId=12905174&src=SEARCH
http://robinsyardsales.com/item.jsp?itemId=12812625&src=SEARCH
i think someone might need this http://robinsyardsales.com/item.jsp?itemId=12563137&src=SEARCH
-
Some good Jeep stuff: http://macon.craigslist.org/pts/1530510715.html
I can go look at it if anyone wants.
-
Some good Jeep stuff: http://macon.craigslist.org/pts/1530510715.html
I can go look at it if anyone wants.
Hell, I think everyone on the Southside has seen that junk. I guess Richard is going to clean his shop out one way or the other. That is some funny chitt right there. {hihi} {hihi} {hihi}
-
http://columbia.craigslist.org/pts/1522997390.html
http://columbia.craigslist.org/pts/1510540113.html
http://columbia.craigslist.org/pts/1504832091.html
http://columbia.craigslist.org/pts/1501190852.html
http://columbia.craigslist.org/pts/1499412924.html
JK parts http://columbia.craigslist.org/pts/1492523468.html
http://columbia.craigslist.org/pts/1492102858.html
crazy deal here http://augusta.craigslist.org/pts/1518833891.html
locker http://augusta.craigslist.org/pts/1518978441.html
did someone say 1tons http://columbia.craigslist.org/pts/1497240022.html
http://atlanta.craigslist.org/nat/pts/1518088652.html
Richard oh Richard this is for you http://atlanta.craigslist.org/nat/pts/1501092817.html
http://atlanta.craigslist.org/wat/pts/1527107072.html
Matt is this your listing http://atlanta.craigslist.org/nat/pts/1518595148.html
front D44 http://atlanta.craigslist.org/nat/pts/1490092276.html
http://greenville.craigslist.org/pts/1526792306.html
-
http://columbia.craigslist.org/pts/1522997390.html
"I'm asking a thousand because I know I could sell it to a scrap yard at today's prices for $500"
Yeah, right.
-
that is what i was thinking... i threw that one in to see if anyone reads them or just adds to the thread....
-
http://nashville.craigslist.org/pts/1529538983.html (http://nashville.craigslist.org/pts/1529538983.html) {hihi}
-
http://nashville.craigslist.org/pts/1529538983.html (http://nashville.craigslist.org/pts/1529538983.html) {hihi}
Somebody better snatch that ask him will he trade for a d60 rear
-
Cheap up grade
http://forum.gon.com/showthread.php?t=465341
-
http://honolulu.craigslist.org/oah/cto/1531541198.html
-
A STEAL!! JK 44's w/ lockers for $2300!! in ALABAMA!!
http://www.jkowners.com/forum/showthread.php?p=305895#post305895 (http://www.jkowners.com/forum/showthread.php?p=305895#post305895)
-
A STEAL!! JK 44's w/ lockers for $2300!! in ALABAMA!!
http://www.jkowners.com/forum/showthread.php?p=305895#post305895 (http://www.jkowners.com/forum/showthread.php?p=305895#post305895)
That is steal considering that the sway bar disconnect is included.
You would need brake calipers though, but that wouldn't be that big of deal with the money you'd save.
-
http://forum.gon.com/showthread.php?t=467350
-
http://forum.gon.com/showthread.php?t=467350
I'm in love.
-
Yeah, the thing looks ridiculous. It's awesome.
-
http://forum.gon.com/showthread.php?t=467350
{drool}
-
Just showed it to my wife and she told me I should go get it cause she thinks it cool looking. {letseat}
-
Just showed it to my wife and she told me I should go get it cause she thinks it cool looking. {letseat}
Go man! {toast}
-
Just showed it to my wife and she told me I should go get it cause she thinks it cool looking. {letseat}
So...did you get it yet?
-
man that is sweet... i hoe you get it....
-
I just {pm} him so we will see. {popcorn}
-
Looks like Jerms JK Rubi!
I want those half doors!!
http://atlanta.craigslist.org/atl/ctd/1538467894.html (http://atlanta.craigslist.org/atl/ctd/1538467894.html)
-
Looks like Jerms JK Rubi!
I want those half doors!!
http://atlanta.craigslist.org/atl/ctd/1538467894.html (http://atlanta.craigslist.org/atl/ctd/1538467894.html)
Told you it's sold, and didn't go for that much. It was at Delta this morning. {toast}
-
Mark did you get that tooo..... damn u man.... {toast} {toast}
-
Mark did you get that tooo..... damn u man.... {toast} {toast}
Donna might would have, had I known what it would sell for, but no a friend of mine bought it.
-
location location location... this one is kinda far...
http://honolulu.craigslist.org/oah/cto/1538012278.html
-
location location location... this one is kinda far...
http://honolulu.craigslist.org/oah/cto/1538012278.html
That would be a sweet find if it wasn't on the Island.
-
http://forum.gon.com/showthread.php?t=468639
-
http://forum.gon.com/showthread.php?t=468639
Damn you Jimmy, I'm trying to talk myself out of these, since I have like new tires...
-
Trailer for full width rigs. $900
http://bb.tennesseeoffroad.com/ubb/ultimatebb.php?ubb=get_topic;f=31;t=000735;p=1#000000
-
Want a $40k YJ for the low low price of $25k? {hihi}
http://forum.gon.com/showthread.php?t=468769
New (used) Dana 35 rear axle with-out clips for towing and extreme performance. Parts and labor $600.00
-
Want a $40k YJ for the low low price of $25k? {hihi}
http://forum.gon.com/showthread.php?t=468769
New (used) Dana 35 rear axle with-out clips for towing and extreme performance. Parts and labor $600.00
It has a 3-inch Body lift parts and labor $660.00 {hihi}
-
Want a $40k YJ for the low low price of $25k? {hihi}
http://forum.gon.com/showthread.php?t=468769
New (used) Dana 35 rear axle with-out clips for towing and extreme performance. Parts and labor $600.00
Looks like you get a free tank of gas. I don't see that charge on there.
-
75% of the "features" this thing had are (NOT INSTALLED). wtf? haha.
-
75% of the "features" this thing had are (NOT INSTALLED). wtf? haha.
Well, I have had all new hoses sitting in my garage for a while. I wish I could blame it on cold weather, but I've had them for about 9 months.
My bike had tons of new parts for at least a year that never got put on. I ended up just giving them away to some kid trying to do a total restore on a 7R.
-
Want a $40k YJ for the low low price of $25k? {hihi}
http://forum.gon.com/showthread.php?t=468769
New (used) Dana 35 rear axle with-out clips for towing and extreme performance. Parts and labor $600.00
i registered to reply that this guy is a F'n idiot- but i guess i have to wait {no} - soo stupid! {hihi}
-
If he sells it I have a White '92 that was frame off restored with better parts, I'll take $20,000 for it. ;D
-
If he sells it I have a White '92 that was frame off restored with better parts, I'll take $2 bucks for it. ;D
fixed it for ya again
-
If he sells it I have a White '92 that was frame off restored with better parts, I'll take $20,000 for it. ;D
That looks alot better. Hey think I could get 30,000 out of the ranger? Im in the wrong business I need to start do restos
-
If he sells it I have a White '92 that was frame off restored with better parts, I'll take $20,000 for it. ;D
That looks alot better. Hey think I could get 30,000 out of the ranger? Im in the wrong business I need to start do restos
I know of a Vespa you could restore and sell for probably $50k to cut your teeth on {hihi}
-
Mike D!!! Rubi 44's with LOCKERS!! for $2200 in CHARLOTTE!
http://www.jkowners.com/forum/showthread.php?t=21199 (http://www.jkowners.com/forum/showthread.php?t=21199)
I got this guy on the hook if you want them, hurry.
-
you go ahead and buy them for me and call it a late b-day/christmas gift to me...
-
Want a $40k YJ for the low low price of $25k? {hihi}
http://forum.gon.com/showthread.php?t=468769
New (used) Dana 35 rear axle with-out clips for towing and extreme performance. Parts and labor $600.00
Ad says its sold now. Wonder if A. some moron bought it for near asking price B. someone bought it worth actual worth C. seller got tired of getting emails every 5 minutes of people calling him a moron
-
probably C {hardlaugh}
-
http://atlanta.craigslist.org/eat/pts/1533138300.html (http://atlanta.craigslist.org/eat/pts/1533138300.html)
-
Hell of a deal
http://atlanta.craigslist.org/atl/pts/1550001186.html
-
Hell of a deal
http://atlanta.craigslist.org/atl/pts/1550001186.html
{letseat} {drool}
-
Hell of a deal
http://atlanta.craigslist.org/atl/pts/1550001186.html
{letseat} {drool}
Doug, where are you going to put these? In your wife's Tahoe?
-
Hell of a deal
http://atlanta.craigslist.org/atl/pts/1550001186.html
{letseat} {drool}
Doug, where are you going to put these? In your wife's Tahoe?
Ha! Right now I can't afford bolts to mount some other goodies I already have! But that would be a bad ass TAHOE!
-
Thought about calling him and asking him if this was a stock yota. {hihi}
http://atlanta.craigslist.org/nat/cto/1548905144.html
-
Thought about calling him and asking him if this was a stock yota. {hihi}
http://atlanta.craigslist.org/nat/cto/1548905144.html
What's up with that front bumper?
-
Thought about calling him and asking him if this was a stock yota. {hihi}
http://atlanta.craigslist.org/nat/cto/1548905144.html
What's up with that front bumper?
Its CUSTOM. ;D
-
If you are looking for a stock yota, this is not it, this is a CUSTOM YOTA!!!! It will go anywhere and climb over anything, wench, ARD air locker, steele side step, and etc... Can someone build me a bumper like that for my Jeep? I love the approach angle on it.
-
I love the approach angle on it.
I was thinking the same thing. I need to consult with him about how to build my xj bumper ;D
-
I love the approach angle on it.
I was thinking the same thing. I need to consult with him about how to build my xj bumper ;D
Find an old locomotive, steal cow catcher, weld to unibody, drink beer.
-
I think he was drinking when he wrote that ad up, from the looks of his spelling.
-
{toast} I like BEER!
-
I think he was drinking when he wrote that ad up, from the looks of his spelling.
nah, it must be ryan's brother...it has an 8" lift.
-
D44 - 550
http://atlanta.craigslist.org/atl/pts/1552345552.html
-
Dana 44 $175
http://atlanta.craigslist.org/sat/pts/1552830909.html
-
Dana 44 $175
http://atlanta.craigslist.org/sat/pts/1552830909.html
thats a d44a out of a GC
-
Dana 44 $175
http://atlanta.craigslist.org/sat/pts/1552830909.html
thats a d44a out of a GC
No one wants an aluminum one, sorry.
-
I misread a post...
-
http://gadsden.craigslist.org/cto/1551473767.html {popcorn}
-
pimpin!
-
No one wants an aluminum one, sorry.
I wanted an aluminum, so I got one. Its actually not a bad swap for anybody with a Grand Cherokee.
Although that one can't be from a 99.
-
Not jeep related, but here it is. Am I missing something? Nice car, but it is a VW. {ehm} http://atlanta.craigslist.org/sat/cto/1555456430.html
-
Dana 44 $175
http://atlanta.craigslist.org/sat/pts/1552830909.html
thats a d44a out of a GC
No one wants an aluminum one, sorry.
whats so bad about the 'luminum d44s?
-
whats so bad about the 'luminum d44s?
Little aftermarket support since they only came in V8 Grand Cherokees from 96-04. Because the center section is aluminum, the bearings can go out faster. And it had c-clips. But GC guys like it because it bolts in, retains ABS (and speed sensor on WJs) plus it has 30 spline, 1.25" axle shafts, a thicker ring gear then normal 44s, and a larger diameter pinion gear (same as 8.8, almost as large as D60).
-
A deal for the die hard D35 crowd
http://atlanta.craigslist.org/nat/pts/1555701709.html
-
Decent deal on a clean XJ...
http://www.southernjeeps.org/phpbb/viewtopic.php?t=33050 (http://www.southernjeeps.org/phpbb/viewtopic.php?t=33050)
-
Hey guys can y'all help me keep am eye out for a 44, 8.8, or 8.25 with lower than 4:10 gears for an XJ?
I can make it fit so that's not a problem. Preferably 4:56s-4:88s.
Thanks
-
Hey guys can y'all help me keep am eye out for a 44, 8.8, or 8.25 with lower than 4:10 gears for an XJ?
I can make it fit so that's not a problem. Preferably 4:56s-4:88s.
Thanks
Do Work 93 YJ on here had an 8.8 with 4.88's for sale a week or so ago, he is going to 1 tons, not sure if it's sold yet.
-
Yes still have it and will make someone a great deal on it. {toast}
-
http://atlanta.craigslist.org/atl/zip/1563877597.html
Get some air rams off of it and some scrap metal $, haha
-
WHT would yo uuse that for?
-
WHT would yo uuse that for?
{ehm} You drinkin again?
-
WHT would yo uuse that for?
I think its for mass producing cabinets.
-
Cheap TJ.
http://atlanta.craigslist.org/nat/cto/1565652141.html
-
Cheap TJ.
http://atlanta.craigslist.org/nat/cto/1565652141.html
Awesome deal.
-
Cheap TJ.
http://atlanta.craigslist.org/nat/cto/1565652141.html
Awesome deal.
Yep, Are you sporting a new Heep?
-
Cheap TJ.
http://atlanta.craigslist.org/nat/cto/1565652141.html
Awesome deal.
Yep, Are you sporting a new Heep?
Not yet, I'm doing a lil price hagglin'
-
Cheap TJ.
http://atlanta.craigslist.org/nat/cto/1565652141.html
Awesome deal.
Yep, Are you sporting a new Heep?
Not yet, I'm doing a lil price hagglin'
COOL {cool}
-
Cheap TJ.
http://atlanta.craigslist.org/nat/cto/1565652141.html
Well that disappeared fast.
-
Cheap TJ.
http://atlanta.craigslist.org/nat/cto/1565652141.html
Well that disappeared fast.
It's still listed {toast}
-
Cheap TJ.
http://atlanta.craigslist.org/nat/cto/1565652141.html
Well that disappeared fast.
It's still listed {toast}
Refresh your page its gone.
-
Dang. What was it?
-
A 97 wrangler sport with 33s and tube fenders, sye, and skids. Pretty nice for 3800
-
A 97 wrangler sport with 33s and tube fenders, sye, and skids. Pretty nice for 3800
So you bought it? {popcorn}
-
I wish.
-
Dang... I would have bought it :(
-
not a bad deal and I'm sure he would come off the price a little:
http://pirate4x4.com/forum/showthread.php?t=846381 (http://pirate4x4.com/forum/showthread.php?t=846381)
-
not a bad deal and I'm sure he would come off the price a little:
http://pirate4x4.com/forum/showthread.php?t=846381 (http://pirate4x4.com/forum/showthread.php?t=846381)
I'm thinking he didn't like my offer. ;D
-
RC 3.25" lift $300:
http://miami.craigslist.org/mdc/pts/1535775200.html (http://miami.craigslist.org/mdc/pts/1535775200.html)
-
LP30 w/ 4.88s, aussie, some other stuff for $375: http://www.naxja.org/forum/showthread.php?t=1021983
-
LP30 w/ 4.88s, aussie, some other stuff for $375: http://www.naxja.org/forum/showthread.php?t=1021983
if it was a HP I'd be all over it.
-
Man this thing is pimp
http://forum.gon.com/showthread.php?t=481287
-
potentially a good deal:
http://www.nc4x4.com/forums/showthread.php?t=81021 (http://www.nc4x4.com/forums/showthread.php?t=81021)
-
kinda high
-
kinda high
if he is asking $750 im sure you could get them for around $600. and its 5 tires. like I said...potentially a good deal.
-
kinda high
I would say right in line, take it from me a 38X12.5X15 TSL or SX aren't easy to come by used. ;D
-
whatca talking about ... ive got some 38 tsl's used -- for sale now.
-
whatca talking about ... ive got some 38 tsl's used -- for sale now.
Get em gone! {toast}
-
kinda high
I would say right in line, take it from me a 38X12.5X15 TSL or SX aren't easy to come by used. ;D
Tell me about it. I can't find anything around here. {boohoo}
-
up for offers ........
-
up for offers ........
Wish they were 16s
-
http://atlanta.craigslist.org/atl/pts/1573783683.html
-
yea they are ATs but nice to have for the highway travel so the MTs dont get chewed up..
http://forum.gon.com/showthread.php?t=484143
-
What a INCREDIBLE DEAL! ADAM should have bought this! $12k on 60's!
http://www.southernjeeps.org/phpbb/viewtopic.php?t=33185&highlight=&sid=b12b9dae9f839b342c87aca17412b3ce (http://www.southernjeeps.org/phpbb/viewtopic.php?t=33185&highlight=&sid=b12b9dae9f839b342c87aca17412b3ce)
(http://jjkates.com/jeep/Jeep%20for%20sale/IMG_1493%20(Small).JPG)
-
no shit time to sell a fake rubi ::)
-
http://www.tellico4x4.com/product_info.php/products_id/27346 (http://www.tellico4x4.com/product_info.php/products_id/27346)
Fab Fours Stinger Bumper like I had on my TJ, NEW, reduced to $435, great deal.
(http://www.tellico4x4.com/images/products/fabfours/A1450.jpg)
-
Not on craigslist but anyways here is a warn 8274 for $550.00 on gon.com http://forum.gon.com/showthread.php?t=484676
-
http://atlanta.craigslist.org/wat/tls/1581874770.html
-
{popcorn} http://forum.gon.com/showthread.php?t=485653 {hihi} {hihi} {hihi} {hihi}
-
Nice tread. ::)
-
http://atlanta.craigslist.org/wat/tls/1581874770.html
emailed the guy and he said it has no brakes, doesn't know the weight on the axles and its about 6' wide btwn fenders. meh.
-
http://atlanta.craigslist.org/wat/tls/1581874770.html
doesn't know the weight on the axles and its about 6' wide btwn fenders. meh.
sounds like a landscaping trailer
-
http://macon.craigslist.org/cto/1579968323.html
-
http://macon.craigslist.org/cto/1579761281.html
-
http://macon.craigslist.org/cto/1579761281.html
That thing is pimpin
-
http://tnorvforum.com/index.php?topic=1728.0
I have a HP D44 and a 9 inch rear. Includes front coils, arms, and frame brackets. Both axles are bone stock. A set of 33" street tires and wheels will be included too. All of the parts are from a 1979 Ford F150. Located in Murfreesboro,TN.
$350
-
http://forum.gon.com/showthread.php?t=485913
-
http://tnorvforum.com/index.php?topic=1728.0
I have a HP D44 and a 9 inch rear. Includes front coils, arms, and frame brackets. Both axles are bone stock. A set of 33" street tires and wheels will be included too. All of the parts are from a 1979 Ford F150. Located in Murfreesboro,TN.
$350
how big of a pita would it be to grind those cast wedges off...?
-
you cant grind them off. You have to have the 77 axle to grind the c off.
-
you cant grind them off. You have to have the 77 axle to grind the c off.
its just metal...why cant you grind them off...?
-
They are not cast on top of the axle tube, they ARE the tube.
-
They are not cast on top of the axle tube, they ARE the tube.
did some research, I see the problem now.
-
They are not cast on top of the axle tube, they ARE the tube.
did some research, I see the problem now.
Reuse them and run a radius arm setup with a johnny joint.
-
They are not cast on top of the axle tube, they ARE the tube.
did some research, I see the problem now.
Reuse them and run a radius arm setup with a johnny joint.
What he said.
-
"that's what she said"--Jimmy.
-
TJ Dana 44 for $400!
http://www.southernjeeps.org/phpbb/viewtopic.php?t=33225&highlight= (http://www.southernjeeps.org/phpbb/viewtopic.php?t=33225&highlight=)
-
Larry do you need this? http://forum.gon.com/showthread.php?t=486866
-
Larry do you need this? http://forum.gon.com/showthread.php?t=486866
The duramax already has one, but thanks for looking out for me.
-
http://atlanta.craigslist.org/nat/cto/1584021431.html dana 60s cheap scrap the body
-
Is 83 IFS?
-
Im not sure it worth looking at with scrap prices being 8.00
-
Here is the steal of a life time. http://forum.gon.com/showthread.php?t=486628
-
I am gonna find out more info on that one!
-
Shop Press
http://atlanta.craigslist.org/wat/tls/1590485747.html
-
36" IROC's:
http://www.southernjeeps.org/phpbb/viewtopic.php?t=33300 (http://www.southernjeeps.org/phpbb/viewtopic.php?t=33300)
-
36" IROC's:
http://www.southernjeeps.org/phpbb/viewtopic.php?t=33300 (http://www.southernjeeps.org/phpbb/viewtopic.php?t=33300)
Nice find
-
I thought so... I was hoping there were 5. I need a spare.
-
I thought so... I was hoping there were 5. I need a spare.
Buy one of these 38's I got in my shop from Ryan, it would work for a good spare, and if he doesn't chime in I'll sell it to ya cheap to get it out of here!
-
k,k, -- ill come pick them up -- ashame that you coudn;t use them , but ill put them to good use {toast}
-
k,k, -- ill come pick them up -- ashame that you coudn;t use them , but ill put them to good use {toast}
I deliver, I know you have a Powersuck and diesel is $$$. Yall about settled in?
-
stll working on it, ill start a new tread soon on it...
-
http://www.trailworthyfab.com/Hummer-Tires/ (http://www.trailworthyfab.com/Hummer-Tires/) didn't know if anyone was lookin for tires :o
-
http://www.trailworthyfab.com/Hummer-Tires/ (http://www.trailworthyfab.com/Hummer-Tires/) didn't know if anyone was lookin for tires :o
Might be the same guy, but theres a guy on Pirate with that deal. I would hit it up, but they're for a 16.5 rim
-
http://forum.gon.com/showthread.php?t=493903
-
Hey Mark thought about calling you and telling you about this but i found it again and thought hell with it here
http://forum.gon.com/showthread.php?t=461148&highlight=american+classic
-
for all you Glock lovers out there...
http://forum.gon.com/showthread.php?t=493750
-
http://atlanta.craigslist.org/atl/cto/1602385321.html
-
WOW I almost spit my drink all over my computer when I seen that. {hihi}
-
whoever even imagines doing that is stupid!
-
I wonder what the inside looks like.
-
good F'n deal http://atlanta.craigslist.org/atl/pts/1601326810.html
-
good F'n deal http://atlanta.craigslist.org/atl/pts/1601326810.html
add knuckles, hubs, spindles, brakes, stub shafts to it.
-
good F'n deal http://atlanta.craigslist.org/atl/pts/1601326810.html
add knuckles, hubs, spindles, brakes, stub shafts to it.
x2...would have been a good deal if it was a complete axle.
-
good F'n deal http://atlanta.craigslist.org/atl/pts/1601326810.html
I keep offering him 250 but he wont take it.
-
http://forum.gon.com/showthread.php?t=494641
-
She'd be one hell of a haul rig!
-
http://atlanta.craigslist.org/nat/pts/1604368661.html
-
I felt like I was reading one of Ryan's post. ;)
http://atlanta.craigslist.org/sat/pts/1604645764.html
-
I felt like I was reading one of Ryan's post. ;)
http://atlanta.craigslist.org/sat/pts/1604645764.html
Haha, it needs battery and gas, but anybody welcome to test drive.................
-
I felt like I was reading one of Ryan's post. ;)
http://atlanta.craigslist.org/sat/pts/1604645764.html
I think it is ryans jeep {popcorn}
-
21' Gooseneck $900 OBO
http://atlanta.craigslist.org/nat/tls/1605300144.html
-
Not Craigslist, but down the road from my house, I think he wants $2500, needs a transfer case and front drive shaft to finish out this fine ride.
[attachment deleted by admin]
-
Jimmy thats all you buddy. {cool}
-
I don't want no mullet-wearin fireturd. Now if it was a Mustang....
-
I don't want no mullet-wearin fireturd. Now if it was a Mustang....
Get with Richard, sure a body swap could be arranged, for a nominal fee!
-
Mark I saw that thing on the way to your house the other day.
I almost ran over a Civic I was laughing so hard. I think I gave the lady in the Civic a coronary.
-
http://atlanta.craigslist.org/atl/cto/1611576233.html
-
Not Craigslist, but down the road from my house, I think he wants $2500, needs a transfer case and front drive shaft to finish out this fine ride.
That looks like KIT's evil twin ;D
-
http://atlanta.craigslist.org/atl/cto/1611576233.html
wtf is wrong with people.
-
Not Craigslist, but down the road from my house, I think he wants $2500, needs a transfer case and front drive shaft to finish out this fine ride.
That looks like KIT's evil twin ;D
KITT did have an evil twin. This is like his retarded cousin.
-
http://atlanta.craigslist.org/atl/cto/1611576233.html
I would take the Fire Bird over this.......
-
TJ D44 REAR $750
http://atlanta.craigslist.org/nat/pts/1606858633.html
-
Is this worth it?
http://atlanta.craigslist.org/atl/pts/1602122133.html
-
Is this worth it?
http://atlanta.craigslist.org/atl/pts/1602122133.html
I was wondering the same thing, but wouldn't you need a bunch of other parts to go with it?
-
Front or rear? Or would it matter?
-
? -- needs new bearings... well if only offroad, i'd pack'm {hihi}
-
http://bb.tennesseeoffroad.com/ubb/ultimatebb.php?ubb=get_topic;f=8;t=024876
Front driver drop and centered rear D44 waggy axles out of a 88 wagoneer
5:38 yukon gears
spool in the rear
detroit locker in the front
disc brakes front and REAR from a 92 Chevrolet truck
riddler diff covers front & rear
extra front shafts inners/outters
2 extra spindles/slug assy's
set up for yj 1500 obo
-
http://bb.tennesseeoffroad.com/ubb/ultimatebb.php?ubb=get_topic;f=8;t=024876
Front driver drop and centered rear D44 waggy axles out of a 88 wagoneer
5:38 yukon gears
spool in the rear
detroit locker in the front
disc brakes front and REAR from a 92 Chevrolet truck
riddler diff covers front & rear
extra front shafts inners/outters
2 extra spindles/slug assy's
set up for yj 1500 obo
{drool}
-
Front or rear? Or would it matter?
dont think so...rubis have d44s front and rear.
-
I want this.
http://forum.gon.com/showthread.php?t=499953
-
Wow that thing is CLEAN... Seems a little on the expensive side though.
-
Wow that thing is CLEAN... Seems a little on the expensive side though.
Its cheap compared to some I have seen. I bet the guy would take 3000 cash.
-
I hadn't even clicked on the link and knew what it was when logan said it was clean. Thats a very nice MJ.
-
40" LTBs:
http://www.southernjeeps.org/phpbb/viewtopic.php?t=33466 (http://www.southernjeeps.org/phpbb/viewtopic.php?t=33466)
-
40" LTBs:
http://www.southernjeeps.org/phpbb/viewtopic.php?t=33466 (http://www.southernjeeps.org/phpbb/viewtopic.php?t=33466)
Almost as much as new from Allsouth.
-
40" LTBs:
http://www.southernjeeps.org/phpbb/viewtopic.php?t=33466 (http://www.southernjeeps.org/phpbb/viewtopic.php?t=33466)
Almost as much as new from Allsouth.
That may be, but at least you can buy these this year...haha.
-
http://macon.craigslist.org/tls/1619223362.html
-
40" LTBs:
http://www.southernjeeps.org/phpbb/viewtopic.php?t=33466 (http://www.southernjeeps.org/phpbb/viewtopic.php?t=33466)
These tires are pretty good. Look good especially in person last weekend.
-
http://macon.craigslist.org/tls/1619223362.html
richard, mark?
-
http://macon.craigslist.org/tls/1619223362.html
richard, mark?
I got bigger fish to fry right now. Its a dang good deal though.
-
http://macon.craigslist.org/tls/1619223362.html
richard, mark?
I got bigger fish to fry right now. Its a dang good deal though.
Me too. I also would like to buy one of the removable 2 post lift, it will be a long time before I can even think about it though.
-
maybe i can talk steve into buyin it for the shop at RR. haha.
-
maybe i can talk steve into buyin it for the shop at RR. haha.
{toast} {toast} {toast}
Tell him we will do the install for him.
-
Make a sweet budget tow rig
http://forum.gon.com/showthread.php?t=501172
-
Damn, that is a steal! Ryan should trade the am-bu-lance for the banana slug!
-
Damn, that is a steal! Ryan should trade the am-bu-lance for the banana slug!
if i didnt have a tow pig i would buy that in a heart beat...(and paint it shortly there after)
-
Damn, that is a steal! Ryan should trade the am-bu-lance for the banana slug!
if i didnt have a tow pig i would buy that in a heart beat...(and paint it shortly there after)
If I had the money, I'd rock it even with that ugly a$$ color. That's the exact drivetrain I want, 7.3+ manual.
-
hell yeah,, i just want the crewcab ---im keeping my ambulance bed!!
-
hell yeah,, i just want the crewcab and the turbo and the 6spd---im keeping my ambulance bed!!
-
http://www.southernjeeps.org/phpbb/viewtopic.php?t=31689&highlight=&sid=f20be48a41351874698a3480aa374ddc (http://www.southernjeeps.org/phpbb/viewtopic.php?t=31689&highlight=&sid=f20be48a41351874698a3480aa374ddc)
-
hell yeah,, i just want the crewcab and the turbo and the 6spd---im keeping my ambulance bed!!
well yeah, the intercooler would be nice... and to do away with my 4 speed...lol
-
Make a sweet budget tow rig
http://forum.gon.com/showthread.php?t=501172
Might be swinging a new addition to the work fleet... this would be nice to have.
-
http://macon.craigslist.org/zip/1620477353.html
-
http://macon.craigslist.org/zip/1620477353.html
Too bad its not an arm. I could always use another one of those. {ehm}
-
http://macon.craigslist.org/zip/1620477353.html
Too bad its not an arm. I could always use another one of those. {ehm}
LMAO, I love the crap that gets posted on craigs sometimes.
-
Get that and find a fake arm and you could pay for everything!
-
http://forum.gon.com/showthread.php?t=502008
-
http://forum.gon.com/showthread.php?t=500453
-
A Jeep for sale with a Trout Unlimited plate, lol: http://forum.gon.com/showthread.php?t=502572
-
A Jeep for sale with a Trout Unlimited plate, lol: http://forum.gon.com/showthread.php?t=502572
I am sending him a message. Hope each of you will too. No mention GATR.
-
http://www.robinsyardsales.com/item.jsp?itemId=13918437&src=SEARCH
-
http://atlanta.craigslist.org/nat/pts/1621728552.html
-
Make a sweet budget tow rig
http://forum.gon.com/showthread.php?t=501172
Any of ya'll already members on here able to get the guy's contact information? Might be looking into picking this up.
-
Make a sweet budget tow rig
http://forum.gon.com/showthread.php?t=501172
Any of ya'll already members on here able to get the guy's contact information? Might be looking into picking this up.
Yeah I can try and get it for you. I've been talking with him the last two days. {toast}
-
Anyone northeast-ish of Atlanta needs to pick this up, practically being given away: http://www.searsoutlet.com/4-Drawer-Workbench-with-Deluxe-Top/d/product_details.jsp?md=ct_md&cid=143&pn=5&ps=10&pid=9299&mode=buyNewOnly
-
Anyone northeast-ish of Atlanta needs to pick this up, practically being given away: http://www.searsoutlet.com/4-Drawer-Workbench-with-Deluxe-Top/d/product_details.jsp?md=ct_md&cid=143&pn=5&ps=10&pid=9299&mode=buyNewOnly
Not available.
-
Whoops, gotta click "select stores" then select the Tucker outlet store. Price is $69.99.
-
Here's one for you Glenn. Seller describes the interior as "Gucci". What a waste.
http://philadelphia.craigslist.org/cto/1624002402.html (http://philadelphia.craigslist.org/cto/1624002402.html)
[attachment deleted by admin]
-
Whoops, gotta click "select stores" then select the Tucker outlet store. Price is $69.99.
I did, but did you try to buy it? it comes back unavailable. Buy one, I'll pick it up for you, .... or me.
-
Yikes!! :D
-
Whoops, gotta click "select stores" then select the Tucker outlet store. Price is $69.99.
I did, but did you try to buy it? it comes back unavailable. Buy one, I'll pick it up for you, .... or me.
Yeah, I just did. Thought about going to get it today, just 'cause.
-
Whoops, gotta click "select stores" then select the Tucker outlet store. Price is $69.99.
I did, but did you try to buy it? it comes back unavailable. Buy one, I'll pick it up for you, .... or me.
Yeah, I just did. Thought about going to get it today, just 'cause.
LOL! Says they gotum in Santa Ana, just saying!
-
LMAO!!
http://atlanta.craigslist.org/atl/cto/1611576233.html (http://atlanta.craigslist.org/atl/cto/1611576233.html)
[attachment deleted by admin]
-
LMAO!!
http://atlanta.craigslist.org/atl/cto/1611576233.html (http://atlanta.craigslist.org/atl/cto/1611576233.html)
Check out the angle on those front lower control arms! What were they thinking? I bet I could pick up on the rocker panel and turn it over! ha ha!
-
Went with my dad the other day to look at a car and seen that thing sitting in a pasture. I thought I was going to run off the road in pure shock. {hihi} The pictures don't even do that thing any justice to how tall it really is.
-
Not a horrible deal on some seats if you want to run 4-points:
http://macon.craigslist.org/pts/1632129939.html
-
you dont save a whole lot or get summit points http://www.summitracing.com/parts/SCA-80-1606-64L/
-
http://forum.gon.com/showthread.php?t=505898
-
http://atlanta.craigslist.org/atl/pts/1616494362.html
-
http://atlanta.craigslist.org/atl/pts/1606052250.html
http://atlanta.craigslist.org/nat/pts/1605440574.html
-
who wants a rape van?
http://forum.gon.com/showthread.php?t=510682 (http://forum.gon.com/showthread.php?t=510682)
-
who wants a rape van?
http://forum.gon.com/showthread.php?t=510682 (http://forum.gon.com/showthread.php?t=510682)
Half the ad got cut off, the rest says "comes with free pair of rapist glasses and a pedophile beard."
-
PAP Atlanta south has a 1995 Dodge 2500 with a CAD 60 front and 80 rear right now. They also have a black '00 C4C XJ in very good condition that has barely been touched, put out this week.
-
plan on going back this week {toast}
-
http://www.southernjeeps.org/phpbb/viewtopic.php?t=33736&highlight=
WOW
(http://www.southernjeeps.org/phpbb/files/jeep3_693.jpg)
(http://www.southernjeeps.org/phpbb/files/jeep1_201.jpg)
-
http://www.southernjeeps.org/phpbb/viewtopic.php?t=33736&highlight=
WOW
(http://www.southernjeeps.org/phpbb/files/jeep3_693.jpg)
(http://www.southernjeeps.org/phpbb/files/jeep1_201.jpg)
{drool} {drool} {eek}
-
http://columbusga.craigslist.org/cto/1659465929.html
-
http://columbusga.craigslist.org/cto/1659465929.html
This truck is my daily driver
{eek} That's one REALLY big DD.
-
http://columbusga.craigslist.org/cto/1659465929.html
This truck is my daily driver
{eek} That's one REALLY big DD.
Was waiting to see who would catch that first. Cool DD, but don't think I would want to do it if I worked any farther than say my backyard. {toast}
-
Listed some YJ parts if anyone knows someone in need.
http://atlanta.craigslist.org/atl/pts/1669300409.html
-
http://columbusga.craigslist.org/cto/1659465929.html
This truck is my daily driver
{eek} That's one REALLY big DD.
Was waiting to see who would catch that first. Cool DD, but don't think I would want to do it if I worked any farther than say my backyard. {toast}
What he aint saying is that the first tank of gas will be the same as his asking price. That being said if only my wife would let me..... lol
-
Ballistic Fab Scratch and Dent Sale:
http://stores.ebay.com/Ballistic-Fabrication__W0QQ_sidZ52380214QQ_trksidZp4634Q2ec0Q2em14?_pgn=2
-
Is this a D60?
http://atlanta.craigslist.org/eat/pts/1642507176.html
-
Is this a D60?
http://atlanta.craigslist.org/eat/pts/1642507176.html
I might guess from the year that it's a Sterling. No picture to look at.
-
If its not a Sterling, it'd probably be a 70 or 80.
-
Good Farm Truck/Work Truck
http://atlanta.craigslist.org/atl/cto/1679123902.html
-
Good Farm Truck/Work Truck
http://atlanta.craigslist.org/atl/cto/1679123902.html
"This is a REAL race truck"
-
Anybody need a kidney? I like the brute.
-
Good start on a nice trail rig.
http://forum.gon.com/showthread.php?t=524759
-
Good start on a nice trail rig.
http://forum.gon.com/showthread.php?t=524759
But it's a ford.....
-
Good start on a nice trail rig.
http://forum.gon.com/showthread.php?t=524759
But it's a ford.....
That's why he said NICE rig.
-
Good start on a nice trail rig.
http://forum.gon.com/showthread.php?t=524759
But it's a ford.....
That's why he said NICE rig.
{no}
-
Good start on a nice trail rig.
http://forum.gon.com/showthread.php?t=524759
But it's a ford.....
But you drive a jeep......
I would buy this but I really dont need 3 trail rigs.
-
http://forum.gon.com/showthread.php?t=525475
http://forum.gon.com/showthread.php?t=525029
http://forum.gon.com/showthread.php?t=524909
-
The first post is by the guy I got my 39.5s from, went to school with him but I hate to bust on him he just bought that jeep on gon a few moths ago for 1500. He likes to make $$$$$$$$$ I guess. And I have pm's from him cause I wanted the jeep but he was the first to pm on it I was second... :bs)
-
The first post is by the guy I got my 39.5s from, went to school with him but I hate to bust on him he just bought that jeep on gon a few moths ago for 1500. He likes to make $$$$$$$$$ I guess. And I have pm's from him cause I wanted the jeep but he was the first to pm on it I was second... :bs)
He also kind of looks like Spencer Pratt (http://en.wikipedia.org/wiki/Spencer_pratt). Makes me laugh every time I see his avatar.
-
But you drive a jeep......
Yep... just a little Jeep. The most capable high production factory built vehicle ever.
Ford makes great mini-vans. Ours is 11 years old and has 112k miles. 3rd transmission. :P
-
http://forum.gon.com/showthread.php?t=525475
http://forum.gon.com/showthread.php?t=525029
http://forum.gon.com/showthread.php?t=524909
I like CJ5's, very nostalgic. I sure can't get in or out of them, and I can't imagine that short wheelbase on the trail.
-
F ord
O ld
R etired
D ummys
-
But you drive a jeep......
Yep... just a little Jeep. The most capable high production factory built vehicle ever.
Ford makes great mini-vans. Ours is 11 years old and has 112k miles. 3rd transmission. :P
That doesnt matter who keeps them stock??? Also jeep has had its fair share of problems. Also nobody will walk by my truck and want to or actually steal the doors. {hihi}
-
What an awesome tow pig!! What would it cost to have heat, a frig, bed, and a few lights in this one?
http://atlanta.craigslist.org/nat/ctd/1692639174.html
-
Doug, I refuse to help you pimp out a molester mobile.
-
Doug, I refuse to help you pimp out a molester mobile.
I hate that you would do that if you had it. Those chilren would be missing on your screet. {nln}
That Duramax would make a fantastic tow pig, and a place to sleep on any ride, comfortably in your own bed.
Same engine in a truck sells for a lot more $. About double and up.
-
That's a good little dealer too. Things don't normally last too long there. Wife & I looked at three different jeeps there & all sold with in two days from the ad posting on CL
-
Add some airbags/helper springs and a tow package and you'd be ready to go! Not a bad deal at all. Could be a small toy hauler too...
-
http://forum.gon.com/showthread.php?t=525723 {popcorn}
-
good repair parts cheap
http://forum.gon.com/showthread.php?t=525658
-
http://forum.gon.com/showthread.php?t=525723 {popcorn}
$2k for a 30/35 combo?
-
http://forum.gon.com/showthread.php?t=525723 {popcorn}
$2k for a 30/35 combo?
"Has the best parts money can buy!"
-
1000 for the front is ok. It has arb and chromos. bolt in and go. not a bad deal.
-
http://forum.gon.com/showthread.php?t=526614
am i the only one that said WTH after reading it
-
1000 for the front is ok. It has arb and chromos. bolt in and go. not a bad deal.
:o
-
Dana 30 OX, $500: http://macon.craigslist.org/pts/1700259436.html
Dana 44 ARB, $250: http://macon.craigslist.org/pts/1700234197.html
-
Dana 30 OX, $500: http://macon.craigslist.org/pts/1700259436.html
Dana 44 ARB, $250: http://macon.craigslist.org/pts/1700234197.html
That ARB looks like it was left outside or the inside of the axle was full of water.
-
Attention Krawler/Ben
Don't know if it's a good deal or not.
http://atlanta.craigslist.org/atl/pts/1700389380.html
-
Attention Krawler/Ben
Don't know if it's a good deal or not.
http://atlanta.craigslist.org/atl/pts/1700389380.html
he would need the exhaust manifold as well as the intercooler and all the intake piping. doesnt seem like a bad deal for just the turbo tho.
-
http://semo.craigslist.org/cto/1672654758.html
-
Thanks Mark! I am looking for a complete 6.5 to pull all the goodies off! Keep those eyes peeled!
-
http://semo.craigslist.org/cto/1672654758.html
"It’ll bring a smile to your face too, to know he’s rolling around looking like a faggot in a Ford Focus. "
{hardlaugh} {hardlaugh} {hardlaugh} {hardlaugh}
-
Thats one heck of a sells pitch. {hihi}
-
http://forum.gon.com/showthread.php?t=529766
-
great deal on a AR..
http://forum.gon.com/showthread.php?t=529854
-
http://atlanta.craigslist.org/atl/pts/1705855702.html
Were the 92's 60 fronts?
-
http://forum.gon.com/showthread.php?t=530020 (http://forum.gon.com/showthread.php?t=530020)
What do you guys think of this one?? I can probably get it for about $500 and figure about $500 to fix the head gasket. What else should I look for as possible signs of more engine damage?
-
Without taking the head off the engine you cannot be guaranteed that it's the head gasket. It could have a cracked head or a cracked block. chances are it is the gasket, just not guaranteed. But for $500 I think it's worth the gamble.
-
http://forum.gon.com/showthread.php?t=530020 (http://forum.gon.com/showthread.php?t=530020)
What do you guys think of this one?? I can probably get it for about $500 and figure about $500 to fix the head gasket. What else should I look for as possible signs of more engine damage?
I would buy it. I was thinking about it this morn. but I cant have any more projects.
-
i need a project ;D
-
i need a project ;D
You've got one.
-
I'm out for sure. The guy PM'd me back that it had 292k on it. Way to many miles to not think that it has some kind of damage to the motor. He said the head gasket was fully blown throwing coolant all over the place.
At least the guy is honest.
-
I'm out for sure. The guy PM'd me back that it had 292k on it. Way to many miles to not think that it has some kind of damage to the motor. He said the head gasket was fully blown throwing coolant all over the place.
At least the guy is honest.
Sounds like the perfect candidate for a stroker build. {popcorn}
-
'87 MJ
http://atlanta.craigslist.org/atl/pts/1704489630.html
-
'87 MJ
http://atlanta.craigslist.org/atl/pts/1704489630.html
Are those easy to change to 4 wheel drive?
-
'87 MJ
http://atlanta.craigslist.org/atl/pts/1704489630.html
Are those easy to change to 4 wheel drive?
Like stealing candy from a baby.
-
'87 MJ
http://atlanta.craigslist.org/atl/pts/1704489630.html
Are those easy to change to 4 wheel drive?
Like stealing candy from a baby.
Or easier, not sure it aint 4X4 already, looks like it's lifted also.
-
http://bb.tennesseeoffroad.com/ubb/ultimatebb.php?ubb=get_topic;f=42;t=011457
-
think its worth it?
http://atlanta.craigslist.org/atl/cto/1715423920.html
-
think its worth it?
http://atlanta.craigslist.org/atl/cto/1715423920.html
If it runs and drives ok I would say $800 is worth it - even more so if you can just use it as a trail beater.
-
think its worth it?
http://atlanta.craigslist.org/atl/cto/1715423920.html
If it runs and drives ok I would say $800 is worth it - even more so if you can just use it as a trail beater.
But it's 2WD...
-
$800 for the rig, a little more to fix the body panels, and ~500 for trans/t-case/d30. Shouldn't be in it too deeply to make it a decent looking 4wd.
-
think its worth it?
http://atlanta.craigslist.org/atl/cto/1715423920.html
If it runs and drives ok I would say $800 is worth it - even more so if you can just use it as a trail beater.
But it's 2WD...
I had to go back and look - I missed that somehow - in my defense I reviewed before coffee this morning!
-
$800 for the rig, a little more to fix the body panels, and ~500 for trans/t-case/d30. Shouldn't be in it too deeply to make it a decent looking 4wd.
I wouldn't bolt a a D30 in anything....
-
Depends one what you are building the rig for.
-
With Jimmy on that one, DD 4X4, PAP parts it could be a 4X4 in a day, on the cheap.
-
Depends one what you are building the rig for.
Good point. I assume in that condition, it's going to be a trail rig only. If it's a street driver and a trail "TIP TOE" rig, a D30 might last a few rides. :D :D
If you are going to make it 4x4, then you might as well make it strong enough to actually wheel and have some fun. Then a D44 minimum.
-
Depends one what you are building the rig for.
Good point. I assume in that condition, it's going to be a trail rig only. If it's a street driver and a trail "TIP TOE" rig, a D30 might last a few rides. :D :D
If you are going to make it 4x4, then you might as well make it strong enough to actually wheel and have some fun. Then a D44 minimum.
you need to stop bashing the D30 {no}. I haven't broken anything in/on my d30 since I have been on 36s. Last time I even popped a u-joint was on 35s with 260x u-joints. {nln}
(of course now I have jinxed myself and will blow it up the next time out).
-
Depends one what you are building the rig for.
Good point. I assume in that condition, it's going to be a trail rig only. If it's a street driver and a trail "TIP TOE" rig, a D30 might last a few rides. :D :D
If you are going to make it 4x4, then you might as well make it strong enough to actually wheel and have some fun. Then a D44 minimum.
you need to stop bashing the D30 {no}. I haven't broken anything in/on my d30 since I have been on 36s. Last time I even popped a u-joint was on 35s with 260x u-joints. {nln}
(of course now I have jinxed myself and will blow it up the next time out).
OK! I hope not. Finesse!
-
OK! I hope not. Finesse!
[/quote]
;)
-
well i havent heard back form the guy yet, i was hoping to check it out today. cause right now i can only afford that jeep (barely) or this 4runner (http://atlanta.craigslist.org/nat/cto/1696060097.html) if i can diagnose why it wont run and get it fixed cheep. but i still would prefer a 4x4 swd comanche. but beggars cant be choosers
-
New M8000 400 bucks
http://atlanta.craigslist.org/nat/pts/1711505272.html
-
I saw that winch. Looks like a good deal.
-
Depends one what you are building the rig for.
Good point. I assume in that condition, it's going to be a trail rig only. If it's a street driver and a trail "TIP TOE" rig, a D30 might last a few rides. :D :D
If you are going to make it 4x4, then you might as well make it strong enough to actually wheel and have some fun. Then a D44 minimum.
ya know some of us have to do it on the cheap... we cant slap brand new Rock Jock 60's in a rig.... we do what we can afford.. please dont bash others for what they can afford... that is freakin rude... and I have a D30 front.. guess i am wrong too...
-
True, not everyone can throw in a 44 or 60 right of the bat, but I think what they're getting at is not that the D30 or whatever is horrible or bashing on people for having them. Its more like if you're gonna make a 4x4 out of a 2wd, at least put something bigger in since you're gonna be doing custom mods anyway.
-
ya know some of us have to do it on the cheap... we cant slap brand new Rock Jock 60's in a rig.... we do what we can afford.. please dont bash others for what they can afford... that is freakin rude... and I have a D30 front.. guess i am wrong too...
WTF! Come on Mike, nobody said that. If you have one already, it's a different story. If somebody gave you one, that's cool too. I said if I am going to wheel it, and it needs an axle, I would not put a Dana 30 in it.
True, not everyone can throw in a 44 or 60 right of the bat, but I think what they're getting at is not that the D30 or whatever is horrible or bashing on people for having them. Its more like if you're gonna make a 4x4 out of a 2wd, at least put something bigger in since you're gonna be doing custom mods anyway.
Yep.
-
I'd say that's true for a lot of 2wd vehicles that you want to convert to 4wd, especially if its an IFS vehicle, but there are TONS of 4wd cherokees in the junkyards. You don't need anything but some decent sockets and wrenches to convert an XJ and I bet it could be done for under $300.
-
I'd say that's true for a lot of 2wd vehicles that you want to convert to 4wd, especially if its an IFS vehicle, but there are TONS of 4wd cherokees in the junkyards. You don't need anything but some decent sockets and wrenches to convert an XJ and I bet it could be done for under $300.
Yep. I love a budget trail beater. My next rig....
-
http://macon.craigslist.org/bar/1714840078.html
-
{ehm} more like, don't buggy!
-
Depends one what you are building the rig for.
Good point. I assume in that condition, it's going to be a trail rig only. If it's a street driver and a trail "TIP TOE" rig, a D30 might last a few rides. :D :D
If you are going to make it 4x4, then you might as well make it strong enough to actually wheel and have some fun. Then a D44 minimum.
ya know some of us have to do it on the cheap... we cant slap brand new Rock Jock 60's in a rig.... we do what we can afford.. please dont bash others for what they can afford... that is freakin rude... and I have a D30 front.. guess i am wrong too...
ya know some of us have to do it on the cheap... we cant slap brand new Rock Jock 60's in a rig.... we do what we can afford.. please dont bash others for what they can afford... that is freakin rude... and I have a D30 front.. guess i am wrong too...
WTF! Come on Mike, nobody said that. If you have one already, it's a different story. If somebody gave you one, that's cool too. I said if I am going to wheel it, and it needs an axle, I would not put a Dana 30 in it.
True, not everyone can throw in a 44 or 60 right of the bat, but I think what they're getting at is not that the D30 or whatever is horrible or bashing on people for having them. Its more like if you're gonna make a 4x4 out of a 2wd, at least put something bigger in since you're gonna be doing custom mods anyway.
Yep.
so did i read that wrong then... and there isnt anything wrong with a D30... opinions are like asshole everyone has one and they all stink...
-
you stink!!!
-
Glen get back to cleaning my crapper
-
High paid crapper cleaner.....I am good with it!
-
I have a D30 so {nln} off
But that is because it came with it. If I had a choice and was starting from scratch, it would not have Dana Turdy.
-
run whatcha brung.
-
http://forum.gon.com/showthread.php?t=534704 {popcorn} {popcorn}
-
I dig the 80's minitruck paint job.
-
http://forum.gon.com/showthread.php?t=534704 {popcorn} {popcorn}
Shouldn't that go into "cars that make you say WTF" thread? I'd say it's a good deal on a useless truck. IMO
-
did i see that right.... it has 2 oil filters out and up front... or am i seeing shit... 7500bucks... he is lucky to get 25bucks...
-
did i see that right.... it has 2 oil filters out and up front... or am i seeing shit... 7500bucks... he is lucky to get 25bucks...
Yep, you saw it right, and he dropped the price $1500 in one day.
-
''Price drop to $7500.00 need to seel by this weekend!!!! Up to trades to guys.''
Hmmmm so did he just fail at school, or only like guys? And just what is it that he wants in trade?
-
did i see that right.... it has 2 oil filters out and up front... or am i seeing shit... 7500bucks... he is lucky to get 25bucks...
Idk I would say it's worth at least $2000 parted out, I really wouldn't mind having the axles.
-
Idk I would say it's worth at least $2000 parted out, I really wouldn't mind having the axles.
So its worth the axles? ;D
I think it would be cool for doing donuts in a field (thanks to rear steer) until the sumbitch rolls.
-
Idk I would say it's worth at least $2000 parted out, I really wouldn't mind having the axles.
So its worth the axles? ;D]
I mean that's all I would want out of it. {toast}
-
http://atlanta.craigslist.org/atl/cto/1721297404.html
-
http://atlanta.craigslist.org/atl/cto/1721297404.html
Tempting... wonder if I could get the heep sold in time to grab that?
-
hes a member here and do work knows him shoot one of them a pm.
-
hes a member here and do work knows him shoot one of them a pm.
Richard is right thats my buddies. Let me know if you need any info. {toast}
-
hes a member here and do work knows him shoot one of them a pm.
Richard is right thats my buddies. Let me know if you need any info. {toast}
I wish, but I would have to take too large of a loss on the XJ to sell it and pick anything else up at the moment... it was just wishful thinking.
-
cheap xj
http://forum.gon.com/showthread.php?t=536260
-
good cheap parts
http://atlanta.craigslist.org/nat/pts/1701718030.html
-
good cheap parts
http://atlanta.craigslist.org/nat/pts/1701718030.html
I think Ben needs to grab that Rodeo 44... {toast}
-
good cheap parts
http://atlanta.craigslist.org/nat/pts/1701718030.html
As an FYI, the selling the parts has been the honest stnad up type. He has sold a couple friends of mine a few differnt items over the last couple months.
-
After Moab I will get serious! Damn expensive trip ;D
-
90% 38x12.5x15 TSL for $700:
http://www.southernjeeps.org/phpbb/viewtopic.php?t=34084 (http://www.southernjeeps.org/phpbb/viewtopic.php?t=34084)
-
This isnt a good deal and sux...
http://forum.gon.com/showthread.php?t=539310
-
dang that blows!
-
:bs) :(
-
Dammit!
-
WTF????
-
http://www.southernjeeps.org/phpbb/viewtopic.php?t=34170&highlight=
-
This isnt a good deal and sux...
http://forum.gon.com/showthread.php?t=539310
It's comin back soon!
-
This isnt a good deal and sux...
http://forum.gon.com/showthread.php?t=539310
It's comin back soon!
{toast} {letseat} {toast}
-
Jimmy
http://atlanta.craigslist.org/wat/for/1788127973.html
http://macon.craigslist.org/for/1784697177.html
http://atlanta.craigslist.org/nat/for/1780617550.html
http://atlanta.craigslist.org/atl/cto/1775544089.html
http://atlanta.craigslist.org/eat/cto/1744338226.html
-
I literally just got my first paycheck and you are already trying to spend it for me Mark?
......emails sent :D
-
perfect timing
-
{popcorn}
-
I literally just got my first paycheck and you are already trying to spend it for me Mark?
......emails sent :D
Doing the math, and figured it was getting close, specially if yall paid 15th. and last day of the month. ;D
perfect timing
I know that's right, figured I needed to find Jimmy a trailer since all you want to do is go fast now. When you going to come up and run Friday Night Drags at AMS.
-
When it cools off. Its hot in the car with no ac windows up and a helmet on. I may try to plan a trip up in a few weeks.
-
When it cools off. Its hot in the car with no ac windows up and a helmet on. I may try to plan a trip up in a few weeks.
let us know, you could leave to car up here ad ill take it one teat runs......
-
When it cools off. Its hot in the car with no ac windows up and a helmet on. I may try to plan a trip up in a few weeks.
let us know, you could leave to car up here ad ill take it one teat runs......
This one will not run on Coors light.
-
it'll burn ..... belive me, we can do it!
-
I literally just got my first paycheck and you are already trying to spend it for me Mark?
......emails sent :D
:D
-
Good deal for some trail rigs. 3 xj's for 1,100. One is a salvage title 96 4wd that runs
http://atlanta.craigslist.org/atl/pts/1807372410.html
-
Good deal for some trail rigs. 3 xj's for 1,100. One is a salvage title 96 4wd that runs
http://atlanta.craigslist.org/atl/pts/1807372410.html
{ehm} {no} {no} {no} my backyard is full. ;D ;D
-
Sorry but I don’t take checks from your rich uncle in Australia. hahahahahah i wonder if he would take a check from a rich uncle from Iraq.... ;D ;D
-
Anybody of you guys with diesels, or even Cummings, need a great double trailer?
http://atlanta.craigslist.org/sat/grd/1817506421.html
-
http://macon.craigslist.org/cto/1815670851.html
-
http://macon.craigslist.org/cto/1815670851.html
Go Livingston. {toast}
-
http://macon.craigslist.org/cto/1815670851.html
Go Livingston. {toast}
only if its a stick or you want to dump about $2000 into the auto to make it worth a poop...and please get rid of that stack.
-
http://macon.craigslist.org/cto/1815670851.html
Go Livingston. {toast}
only if its a stick or you want to dump about $2000 into the auto to make it worth a poop...and please get rid of that stack.
Speaking of that stack, Drew still has my exhaust I hope, he said he would give me a buzz when he came up to McDonough.
-
Rredalty is selling junk cheap again, YJ on Rock's $4900
http://www.nc4x4.com/forums/showthread.php?t=91708
-
Dang thats a deal right there. I woulnt mind that jeep.
-
Dang thats a deal right there. I woulnt mind that jeep.
That is Matt, he is who I bought my XJ from, when he gets ready to move on, he will deal and take losses. I want it, but I love be married to my wife. ;D
-
This is one bad a@# looking zj for the price. $2500, iroks,44/60, 4 link, and he says 77k miles. http://www.southernjeeps.org/phpbb/viewtopic.php?t=34350
-
This is one bad a@# looking zj for the price. $2500, iroks,44/60, 4 link, and he says 77k miles. http://www.southernjeeps.org/phpbb/viewtopic.php?t=34350
I've been eyeing that ZJ all week! I wish I had a place to keep it. I would go buy it today.
-
If someone from here does buy it, will you please put a real Truss on the rear axle... {popcorn}
-
http://atlanta.craigslist.org/atl/pts/1821568764.html
-
I've been eyeing that ZJ all week! I wish I had a place to keep it. I would go buy it today.
I have 5 acres you can park it on, just leave me the keys so I can "move it" to mow. ;D
-
http://www.jeepforum.com/forum/f126/78-79-f250-front-rear-dana-60-a-1059167/
-
http://atlanta.craigslist.org/atl/pts/1823909273.html
Brand New in the box Superior 4:88 Ring and Pinion sets (2) with matching Master Install Kits
These parts were planned to go on my 2001 TJ Sahara, but I sold it before the project could be completed.
Up For Sale is:
* Dana 30 Front 4:88 Ring and Pinion Set - part# D30488TJ
* Dana 44 Front/Rear 4:88 Ring and Pinion Set - part# D44489
* Master Overhaul Kit for Dana 30 Front Ring/Pinion Set - part# 35-2031
* Master Overhaul Kit for Dana 44 Rear Ring/Pinion Set - part# 35-2033
Make Me an Offer! These parts retail for over $500
-
http://macon.craigslist.org/pts/1839708538.html
-
http://macon.craigslist.org/pts/1839708538.html
ohhhh, those are kool {hihi}
-
X2
-
It has been flagged for removal.. that sux I weanted my very own custom paint in da hood
-
http://atlanta.craigslist.org/atl/cto/1801996405.html (http://atlanta.craigslist.org/atl/cto/1801996405.html)
pretty sweet Brute for a pretty penny, but definitely worth it
-
A guy around here has a sliver one. I've always wanted to see them with the top & doors off.
Pretty cool looking, but the price is the killer. You could get a new Rubi for that.
-
Tedder I found you a XJ!!
http://atlanta.craigslist.org/atl/cto/1844220109.html
-
Holy crap that thing is ugly. Who thinks that crap looks cool? Check out the email address lol
-
Holy crap that thing is ugly. Who thinks that crap looks cool? Check out the email address lol
he pissed some money out on that thing. haha.
-
Holy crap that thing is ugly. Who thinks that crap looks cool? Check out the email address lol
he pissed some money out on that thing. haha.
Which one is a premium head gasket?
-
Holy crap that thing is ugly. Who thinks that crap looks cool? Check out the email address lol
he pissed some money out on that thing. haha.
Which one is a premium head gasket?
There is one. This is what it says about it
Severe Duty Head Gasket.; Specifically Designed for Severe Duty Applications.; Increased Armor Thickness for Enhanced Detonation Resistance and Maximized Combustion Seal.; Increased Body Core Thickness for Higher Radial Strength.; Silicone Coating For Enhanced Fluid Sealability.; Round Bore Shape
Extra 20 bucks.
-
i wouldn't advertise that it had the head gasket replaced if I was trying to sell it.
-
I would. Then you dont have to worry about it. I doubt that he has to worry about that with the paint scheme he has going on.
-
i want the seats
-
............
http://www.showusyourpizza.com/pizzagallery/?id=1916
-
^ WTF? {ehm}
-
Thats what I said. Seen it on a mustang forum. I was waiting on your respose. Why is there even a craigslist there?
-
Richard really.. pizza pic...
-
Atleast he tells the truth about it- Death trap. {hihi}
http://atlanta.craigslist.org/sat/cto/1858512142.html
-
lol it looks funny :D
-
Atleast he tells the truth about it- Death trap. {hihi}
http://atlanta.craigslist.org/sat/cto/1858512142.html
maybe smaller tires.....
-
Atleast he tells the truth about it- Death trap. {hihi}
http://atlanta.craigslist.org/sat/cto/1858512142.html
jeff foxworthy was right when he said, "you caint give rednecks money." haha
-
And I would have to agree with Jeff 100%.
-
Here is a good deal. NP241OR for $800
http://www.southernjeeps.org/phpbb/viewtopic.php?t=34638&highlight=
-
HP44 and 9" Asking $350
http://bb.tennesseeoffroad.com/ubbthreads.php?ubb=showflat&Number=22112#Post22112
-
http://www.naxja.org/forum/showthread.php?t=1039684
-
http://www.naxja.org/forum/showthread.php?t=1039684
Good gracious I wish I had the spare $$$ for these. Moving is fun but could gracious can it suck a wallet dry.
-
Prob a scam but if not its a steal
http://macon.craigslist.org/pts/1890067728.html
-
http://atlanta.craigslist.org/atl/pts/1885847013.html
-
http://atlanta.craigslist.org/atl/pts/1885847013.html
Why is that 60 so cheap? Is there something about that new of a model or something?
-
http://atlanta.craigslist.org/atl/pts/1885847013.html
Why is that 60 so cheap? Is there something about that new of a model or something?
just b/c its a balljoint and not a kingpin , but still its a 60 -- its been on CL a while though....
-
http://atlanta.craigslist.org/atl/pts/1885847013.html
Why is that 60 so cheap? Is there something about that new of a model or something?
just b/c its a balljoint and not a kingpin , but still its a 60 -- its been on CL a while though....
I could be wrong, but that year model F-250 could also be the Dana 50, which a lot of people will mistake for a 60
-
http://atlanta.craigslist.org/atl/pts/1885847013.html
Why is that 60 so cheap? Is there something about that new of a model or something?
just b/c its a balljoint and not a kingpin , but still its a 60 -- its been on CL a while though....
I could be wrong, but that year model F-250 could also be the Dana 50, which a lot of people will mistake for a 60
good point {toast}
-
Probably why it hasnt sold yet then.
-
Eh, if I had the money and could find one cheap enough I'd still run it. Cheaper than a 60, a good amount stronger than a 44 and could probably safely run up to a 38 with my driving style.
-
he says its from a 550 which is a super 60. I highly doubt thats what it is but its possible. Its prob a d60 thats for a dually
-
he says its from a 550 which is a super 60. I highly doubt thats what it is but its possible. Its prob a d60 thats for a dually
If anyone is interested in this, i live about 20 mins from where it is. I can go take pics.
-
If you could do that it would be nice. I would like to see it. Will you look at the bom number and write it down. I will give you gas money.
-
If you could do that it would be nice. I would like to see it. Will you look at the bom number and write it down. I will give you gas money.
I will get ahold of him on fri, i'm off work. I can ride down and check it out as long he is not a butthole. There is awesome rock garden on the way that ive been wanting to take a detour on the last few times ive been down there.
-
http://atlanta.craigslist.org/atl/pts/1885847013.html
Why is that 60 so cheap? Is there something about that new of a model or something?
just b/c its a balljoint and not a kingpin , but still its a 60 -- its been on CL a while though....
Does that year have unit bearings? Those things are expensive for 1 tons, I bought two for the duramax.
A HP ball joint dana 60 would still be cool as long as it does not have unit bearings.
-
Prob a scam but if not its a steal
http://macon.craigslist.org/pts/1890067728.html
Definitely a scam, I googled the email address: http://www.google.com/search?source=ig&hl=en&rlz=&=&q=rebecca.santino%40gmx.com&aq=f&aqi=&aql=&oq=&gs_rfai=CvPJkh2JjTISTDYfAyQTf-6ULAAAAqgQFT9Ac3JA
-
he says its from a 550 which is a super 60. I highly doubt thats what it is but its possible. Its prob a d60 thats for a dually
Good point, I guess I shouldn't be reading Craigslist ads without my contacts in...
-
Prob a scam but if not its a steal
http://macon.craigslist.org/pts/1890067728.html
the dead give away for me was all the snow on the ground behind the truck...it has never snowed that much in milledgeville.
-
I'm running the 04 60 in mine and its been great so far. My buddy with the exo cherokee is running an 03 60 on 40" LTBs and beats the sh%t out of it and hasn't broken yet. The way hes treated his 60 is what sold me on buying the third gen 60 that I bought.
-
Wish i had some extra Cash!!!
http://atlanta.craigslist.org/wat/cto/1906715699.html
-
GON swap and sell is back!!!!!! {toast} {letseat} {toast} ;D
http://www.gon.com/marketplace/ (http://www.gon.com/marketplace/)
-
Thinking about picking this XJ up and finishing it up before I sell my H3. What do you guys think? Good deal? I'd probably put 33s on it and sell the wheels and tires that are on there.
http://atlanta.craigslist.org/nat/cto/1913745036.html (http://atlanta.craigslist.org/nat/cto/1913745036.html)
-
Thinking about picking this XJ up and finishing it up before I sell my H3. What do you guys think? Good deal? I'd probably put 33s on it and sell the wheels and tires that are on there.
http://atlanta.craigslist.org/nat/cto/1913745036.html (http://atlanta.craigslist.org/nat/cto/1913745036.html)
Looks like a winner, the catch is going to be what is casuing the over heating.
-
Thinking about picking this XJ up and finishing it up before I sell my H3. What do you guys think? Good deal? I'd probably put 33s on it and sell the wheels and tires that are on there.
http://atlanta.craigslist.org/nat/cto/1913745036.html (http://atlanta.craigslist.org/nat/cto/1913745036.html)
Looks like a winner, the catch is going to be what is casuing the over heating.
I agree, and I'm very scared of rust and XJ's, something about the whole sheet metal unibody thing and rust.
-
Thinking about picking this XJ up and finishing it up before I sell my H3. What do you guys think? Good deal? I'd probably put 33s on it and sell the wheels and tires that are on there.
http://atlanta.craigslist.org/nat/cto/1913745036.html (http://atlanta.craigslist.org/nat/cto/1913745036.html)
Looks like it is sitting at Offroad Outfitters in Dawsonville. Call Justin there and ask him about it.
-
The guys sent me some more pics of it. It's going to need more work than I can chew right now.
Here's the link to more pics if anyone is interested:
http://s817.photobucket.com/albums/zz95/z_lindig/ (http://s817.photobucket.com/albums/zz95/z_lindig/)
-
The guys sent me some more pics of it. It's going to need more work than I can chew right now.
Here's the link to more pics if anyone is interested:
http://s817.photobucket.com/albums/zz95/z_lindig/ (http://s817.photobucket.com/albums/zz95/z_lindig/)
Yep, that rust would scare me off fast.
-
Thinking about picking this XJ up and finishing it up before I sell my H3. What do you guys think? Good deal? I'd probably put 33s on it and sell the wheels and tires that are on there.
http://atlanta.craigslist.org/nat/cto/1913745036.html (http://atlanta.craigslist.org/nat/cto/1913745036.html)
Looks like a winner, the catch is going to be what is casuing the over heating.
I agree, and I'm very scared of rust and XJ's, something about the whole sheet metal unibody thing and rust.
It's better than finding cracks in the uni-body {:CH}
It looks like a steal, as for what's causing the overheating, with that many miles it could just be the radiator. I know when I replaced mine, it solved my overheating issues.
-
Thinking about picking this XJ up and finishing it up before I sell my H3. What do you guys think? Good deal? I'd probably put 33s on it and sell the wheels and tires that are on there.
http://atlanta.craigslist.org/nat/cto/1913745036.html (http://atlanta.craigslist.org/nat/cto/1913745036.html)
Looks like a winner, the catch is going to be what is casuing the over heating.
I agree, and I'm very scared of rust and XJ's, something about the whole sheet metal unibody thing and rust.
It's better than finding cracks in the uni-body {:CH}
It looks like a steal, as for what's causing the overheating, with that many miles it could just be the radiator. I know when I replaced mine, it solved my overheating issues.
Give yours time, if you don't do some mods. soon and you wheel it and hit chit yours will crack. {no} Cracks are easier to repair proper than cancer, especially cancer you don't/can't see. I've dealt with both and will take cracks over cancer, if it's got as much rust through as the photobucket pictures show :o, I promise there is more that you can't see. Look at the holes in you're unibody where salty road water could get and tell me you don't agree. {salute}
-
Thinking about picking this XJ up and finishing it up before I sell my H3. What do you guys think? Good deal? I'd probably put 33s on it and sell the wheels and tires that are on there.
http://atlanta.craigslist.org/nat/cto/1913745036.html (http://atlanta.craigslist.org/nat/cto/1913745036.html)
Looks like a winner, the catch is going to be what is casuing the over heating.
I agree, and I'm very scared of rust and XJ's, something about the whole sheet metal unibody thing and rust.
It's better than finding cracks in the uni-body {:CH}
It looks like a steal, as for what's causing the overheating, with that many miles it could just be the radiator. I know when I replaced mine, it solved my overheating issues.
Give yours time, if you don't do some mods. soon and you wheel it and hit chit yours will crack. {no}
Already finding them. hence the {:CH}. I think I'm a little rougher on mine, than most guys running 33's though. {toast}
-
Thinking about picking this XJ up and finishing it up before I sell my H3. What do you guys think? Good deal? I'd probably put 33s on it and sell the wheels and tires that are on there.
http://atlanta.craigslist.org/nat/cto/1913745036.html (http://atlanta.craigslist.org/nat/cto/1913745036.html)
Looks like a winner, the catch is going to be what is casuing the over heating.
I agree, and I'm very scared of rust and XJ's, something about the whole sheet metal unibody thing and rust.
It's better than finding cracks in the uni-body {:CH}
It looks like a steal, as for what's causing the overheating, with that many miles it could just be the radiator. I know when I replaced mine, it solved my overheating issues.
Give yours time, if you don't do some mods. soon and you wheel it and hit chit yours will crack. {no}
Already finding them. hence the {:CH}. I think I'm a little rougher on mine, than most guys running 33's though. {toast}
hdoffroadengineering.com Brian is a great person and makes agreat looking product. I've had mine sitting in the garage for month's waiting on the 2.0 build.
-
Towrig/ Camper anyone?
http://www.publicsurplus.com/sms/auction/view?auc=472183
-
Towrig/ Camper anyone?
http://www.publicsurplus.com/sms/auction/view?auc=472183
** VEHICLE CAN BE PURCHASED ONLY BY PUBLIC SAFETY AGENCIES - PROOF IS REQUIRED **
-
website that you guys should hit up..........
http://www.govdeals.com/
-
Jimmy you know you wanna go.
http://macon.craigslist.org/wan/1933138251.html
-
http://athensga.craigslist.org/pts/1938102273.html
-
http://cgi.ebay.com/ebaymotors/Pro-Street-Jeep-Cherokee-Worlds-Quickest-/110581256722?cmd=ViewItem&pt=US_Cars_Trucks&hash=item19bf281212
-
http://cgi.ebay.com/ebaymotors/Pro-Street-Jeep-Cherokee-Worlds-Quickest-/110581256722?cmd=ViewItem&pt=US_Cars_Trucks&hash=item19bf281212
"Tagged & Street Driven" That's pretty cool
Free brown stains included.
-
I am a sucker for a 2 door XJ. :P
-
Here is a deal: http://www.southernjeeps.org/phpbb/viewtopic.php?t=34942&highlight=
-
D60's for trade for 30 and 8.8......Long road trip but worth it.
http://www.pirate4x4.com/forum/showthread.php?t=859560
-
http://www.govdeals.com/index.cfm?fa=Main.Item&itemID=14&acctID=2382
http://www.govdeals.com/index.cfm?fa=Main.Item&itemID=412&acctID=504
-
Any one want to buy the lot and sell me the spare D44 for like $100?
http://atlanta.craigslist.org/wat/pts/1994418567.html
-
Buy it and take the rest to scrap?
-
Buy it and take the rest to scrap?
I would, but literally do not have that kind of cash laying around right now. If I did I would have this thing loaded on the trailer tonight. If you could sit on the useful stuff it would be easy to double your money with this. The body and frame would likely bring $200 in scrap
-
Anyone looking to upgrade to a Durango steering box?
http://atlanta.craigslist.org/nat/pts/2003933419.html
-
http://macon.craigslist.org/cto/2003758615.html
-
http://macon.craigslist.org/cto/2003758615.html
looks like a pretty sweet/original tow rig to me!
-
I have seen this truck in person. It nice and if I had the extra
$$$$$$$$$$$$$$$$$ I would buy it
-
I have seen this truck in person. It nice and if I had the extra
$$$$$$$$$$$$$$$$$ I would buy it
Centurions are sweet, I've seen it around town once or twice, very nice ride.
-
This would make a neat start on a trail rig. Turbo Diesel Sammi
http://gulfport.craigslist.org/cto/2003060224.html
-
Fairly cheap Dana 44/ 9" combo. I've got a message in about the 9", but I'll bet he doesn't take my offer. {poke}
http://atlanta.craigslist.org/nat/pts/2012360233.html
-
Fairly cheap Dana 44/ 9" combo. I've got a message in about the 9", but I'll bet he doesn't take my offer. {poke}
http://atlanta.craigslist.org/nat/pts/2012360233.html
I cant believe he wants more for the 9" than the 44 he must not know what I know.
-
Same thing I'm thinking. I offered $90 for the rear, hence why I don't think he'll bite, but I'm hoping he'll negotiate, rather than get pissed.
still $250 for the combo wouldn't be a terrible price.
-
You can get them at the pap for 125 and get spare shafts. Jsut keep that in mind.
-
Yeah, I was pricing that out in class today. {hihi}
I would go up to $110 with him though, just because it is on my way home from school everyday.
-
http://macon.craigslist.org/bar/2015311841.html
-
http://macon.craigslist.org/bar/2015311841.html
That's cool.
-
Here is someone a good deal on a trail rig.
http://www.southernjeeps.org/phpbb/viewtopic.php?t=35258&highlight=
-
http://atlanta.craigslist.org/nat/pts/2029216174.html
-
$900 Trailer in Jasper
http://atlanta.craigslist.org/nat/grd/2032889735.html (http://atlanta.craigslist.org/nat/grd/2032889735.html)
-
Someone needs to buy this and start a GATR fabrication shop:
http://atlanta.craigslist.org/sat/tls/2042617077.html (http://atlanta.craigslist.org/sat/tls/2042617077.html)
-
Someone needs to buy this and start a GATR fabrication shop:
http://atlanta.craigslist.org/sat/tls/2042617077.html (http://atlanta.craigslist.org/sat/tls/2042617077.html)
Cool, but huge, think I'll just stick with our CNC Plasma guy that we have already. {toast}
-
Someone needs to buy this and start a GATR fabrication shop:
http://atlanta.craigslist.org/sat/tls/2042617077.html (http://atlanta.craigslist.org/sat/tls/2042617077.html)
Cool, but huge, think I'll just stick with our CNC Plasma guy that we have already. {toast}
yep he is pretty cool {cool}
-
Someone needs to buy this and start a GATR fabrication shop:
http://atlanta.craigslist.org/sat/tls/2042617077.html (http://atlanta.craigslist.org/sat/tls/2042617077.html)
Cool, but huge, think I'll just stick with our CNC Plasma guy that we have already. {toast}
yep he is pretty cool {cool}
yeah, I need to ind out what kind of beer he likes so I can buy him a keg for all of the stuff I would like to have cut...
-
http://greenville.craigslist.org/pts/2049907052.html
I want the rear. {bruce}
-
I want it in the rear.
I don't know... I'm beginning to wonder about you guys. :o
-
http://greenville.craigslist.org/pts/2049907052.html
I want it in the rear.
Ben, you might want to re-word that! But, C'mon, $4300 for a wrecked jeep, what a deal, it even has a D44............................... WTF
-
http://greenville.craigslist.org/pts/2049907052.html
I want it in the rear.
ROFLMFAO
-
http://greenville.craigslist.org/pts/2049907052.html
I want the rear. {bruce}
id pass on the transfercase and tranny with two different tires sizes... has a XJ in the yard the other month because of the with a blown up 231...
-
also guys on GON.com theres a 95 XJ 2 door 4x4 runnin and driving with a pretty straight body for only $850... all stock... not bad...
-
http://atlanta.craigslist.org/nat/grd/2068188433.html
-
http://atlanta.craigslist.org/nat/grd/2068188433.html
saw that the other day... JIMMY
-
http://atlanta.craigslist.org/nat/grd/2068188433.html
saw that the other day... JIMMY
Think Jimmy is looking at a different kind of trailer right now, he sent this picture with description the other day and asked my opinion.
[attachment deleted by admin]
-
All its missing is a plastic kiddie pool. {hihi}
-
I'm actually looking for something a little bigger...and more permanent...and isn't a turnader magnet.
THEN the absolute first thing I am buying, is a freaking trailer.
-
I'm actually looking for something a little bigger...and more permanent...and isn't a turnader magnet.
THEN the absolute first thing I am buying, is a freaking trailer.
so youre lookin for a double wide? we could set it on some cinder blocks and put a nice skirt on it...then get goin on the above ground pool. youd be down right fancy then. {toast}
-
http://atlanta.craigslist.org/sat/tls/2073344714.html (http://atlanta.craigslist.org/sat/tls/2073344714.html)
throw a pair of real trailer axles under it and you would have a great deal on a nice 2 jeep hauler. {toast}
-
ive seen crazier! theres two newer model 5th wheels down here both about 100 feet form each other... have probly $10k invested in land scaping and porches each... i mean in ground fish ponds and everything!!
guess they won a scratch off!
-
http://atlanta.craigslist.org/wat/pts/2074651717.html
-
Lifted Liberty
http://charlotte.craigslist.org/cto/2068144448.html
-
Dang Im gonna email him. Mark I will call you later. {toast}
-
Dang Im gonna email him. Mark I will call you later. {toast}
Thinkin bout emailin him myself, that things pretty bad.
-
Go for it. Im just gonna offer him a mustang.
-
{ehm} http://cgi.ebay.com/ebaymotors/Jeep-Wrangler-Rubicon-2008-Jeep-Wrangler-Rubicon-Dana-60-Rock-Jocks-40s-_W0QQcmdZViewItemQQhashZitem230bd21afcQQitemZ150522174204QQptZUSQ5fCarsQ5fTrucks
-
{ehm} http://cgi.ebay.com/ebaymotors/Jeep-Wrangler-Rubicon-2008-Jeep-Wrangler-Rubicon-Dana-60-Rock-Jocks-40s-_W0QQcmdZViewItemQQhashZitem230bd21afcQQitemZ150522174204QQptZUSQ5fCarsQ5fTrucks
Nice jeep. I think I have seen it somewhere before.
-
Lifted Liberty
http://charlotte.craigslist.org/cto/2068144448.html
SOLD LAST NIGHT :bs)
-
Lifted Liberty
http://charlotte.craigslist.org/cto/2068144448.html
SOLD LAST NIGHT :bs)
I would have thought, if he was selling so cheap because he NEEDED the money (as in the advertisement), he wouldn't have even been interested in a trade {ehm}
-
He said trade in his add so he must need a ride. {toast}
-
He said trade in his add. {toast}
Yep, read the whole add. I was just curious why he would be interested in a trade when his add also said "I'm selling this jeep 5200 obo need to sell asap. In major need of money. This is why i am selling so cheap"
Just sounded kind of fishy to me, but what do I know {ehm}.
Also, BTW, just found out I am not going to be out of town next week. Will be home from Thanksgiving with my daughter and grandson on Sunday night. My Boss decided there is a fire more important at home station than the one in Florida. So... you can stop by after work next week or wait until next weekend. Just let me know {toast}
-
Yeah I read that. I dont think it was that cheap. I wouldnt pay 5000 for a rig like that. I would pay 3,000 though. You can find them un modded for 3,500-5,000 depending on condition so to me it wasnt a steal.
-
{ehm} http://cgi.ebay.com/ebaymotors/Jeep-Wrangler-Rubicon-2008-Jeep-Wrangler-Rubicon-Dana-60-Rock-Jocks-40s-_W0QQcmdZViewItemQQhashZitem230bd21afcQQitemZ150522174204QQptZUSQ5fCarsQ5fTrucks
Nice jeep. I think I have seen it somewhere before.
yeah, it was ok for a Mall krawler
-
http://atlanta.craigslist.org/nat/cto/2064289981.html 8==D
-
ive actually seen this around town a couple times and it is massive. the pictures do not do it justice at all. if you are under about 6 1/2 feet tall, youll need a ladder haha.
-
http://atlanta.craigslist.org/nat/cto/2064289981.html 8==D
bet it could float!
-
Pretty kewl despite 46's and stock 4.10 gears
-
http://atlanta.craigslist.org/atl/cto/2088499172.html
different but could be pretty kewl
-
man, I wish I had the cash. Perfect wheeler right there. Small, light, 4 door! {letseat}
-
thats really not that much either... id buy it...
-
X2 but like he said "if i had the dough" things are ruff around the holidays
-
Yeah. About every bill tag, renewal, tax etc is due this month >:(
-
Yup same for me 2, me birthday is the day after christmas. I know the feeling
-
Yeah. About every bill tag, renewal, tax etc is due this month >:(
Yup same for me 2, me birthday is the day after christmas. I know the feeling
Yep, same here!!! I can't even register anything in my wife's name 'cause she is also born in Dec, the day after me >:(
-
Yeah. About every bill tag, renewal, tax etc is due this month >:(
I'm with ya there, including wifes birthday.
-
X2 but like he said "if i had the dough" things are ruff around the holidays
Yup. too bad he doesn't want a trade, I'd wheel that thing in a heart beat. {letseat}
-
Yeah. About every bill tag, renewal, tax etc is due this month >:(
Yup same for me 2, me birthday is the day after christmas. I know the feeling
Yep, same here!!! I can't even register anything in my wife's name 'cause she is also born in Dec, the day after me >:(
Not in Dec. but my wife and I have the same birthday, so I feel ya on the inability to split claim on things.
-
Well Calvin, makes it easy to not forget. ;)
-
it also means if you do forget {no}
-
Good deal on some MTR's, wish they had been around last Dec.
http://atlanta.craigslist.org/atl/pts/2094596806.html
http://atlanta.craigslist.org/atl/pts/2094853086.html
-
Good deal on some MTR's, wish they had been around last Dec.
http://atlanta.craigslist.org/atl/pts/2094596806.html
http://atlanta.craigslist.org/atl/pts/2094853086.html
email sent...I want me another set of MTRs. {letseat} who wants some TSLs if the deal goes thru?
-
http://athensga.craigslist.org/cto/2081191585.html
-
http://athensga.craigslist.org/cto/2081191585.html
{drool} {drool} {drool}
i wish i could get it
-
me too!
-
http://cgi.ebay.com/ebaymotors/Wrtangler-TJ-Dana-44-Dana-30-4-56-gears-_W0QQcmdZViewItemQQhashZitem336333d557QQitemZ220707673431QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories#ht_500wt_945
-
http://cgi.ebay.com/ebaymotors/Jeep-ZJ-Dana-44-Rear-Differential-Axle-3-73-Wrangler-TJ-_W0QQcmdZViewItemQQhashZitem335f4cba06QQitemZ220642195974QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories#ht_1001wt_702
aluminum center? How would that hold up with some meats? hhhmmmm???
-
http://athensga.craigslist.org/cto/2085398322.html
-
http://cgi.ebay.com/ebaymotors/Jeep-ZJ-Dana-44-Rear-Differential-Axle-3-73-Wrangler-TJ-_W0QQcmdZViewItemQQhashZitem335f4cba06QQitemZ220642195974QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories#ht_1001wt_702
aluminum center? How would that hold up with some meats? hhhmmmm???
Truss it and add a diff. skid and its a great axle. Stronger then the regular D44 and close to an 8.8.
-
I knew you would chime in. Thanks Ben
-
http://cgi.ebay.com/ebaymotors/Jeep-ZJ-Dana-44-Rear-Differential-Axle-3-73-Wrangler-TJ-_W0QQcmdZViewItemQQhashZitem335f4cba06QQitemZ220642195974QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories#ht_1001wt_702
aluminum center? How would that hold up with some meats? hhhmmmm???
i was pretty sure the TJ and ZJ rears were different widths and something else? im not a fan of the aluminum D44's... dont think they can hold up to the stress that there given... i believe they had a problem with some inner bearings taking a crap alot because of the flex the differential aloud... if i had one a FULL cased locker would go in it as well as a STEEL heavy duty diff cover... maybe would get it alittle stronger...
-
http://cgi.ebay.com/ebaymotors/Jeep-ZJ-Dana-44-Rear-Differential-Axle-3-73-Wrangler-TJ-_W0QQcmdZViewItemQQhashZitem335f4cba06QQitemZ220642195974QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories#ht_1001wt_702
aluminum center? How would that hold up with some meats? hhhmmmm???
Truss it and add a diff. skid and its a great axle. Stronger then the regular D44 and close to an 8.8.
Do they hold up after doing that? I love the disk brakes.
-
It is the same width as a TJ axle.
Yes, there is no full carrier locker available for it and they're not a lot of options for lunch box lockers either, but that is the biggest thing.
And yes, it does eat carrier bearings, but that is why you truss and skid it, to prevent deflection.
But there are several people on the Grand forums running this axle with 35"s and having no real problems.
Is this a good swap for a TJ or XJ? Not really, get a regular D44 or 8.8 but the Grand guys where this axle will bolt in, its a pretty good choice.
-
http://atlanta.craigslist.org/atl/ctd/2107740279.html (http://atlanta.craigslist.org/atl/ctd/2107740279.html)
if that isnt a scam it is a damn good deal on a 24v cummins. looks awesome...
-
Sho' is a scam:
San Fran: http://sfbay.craigslist.org/sby/ctd/2107977800.html
Austin, TX: http://austin.craigslist.org/ctd/2107743062.html
...and a bunch more.
-
Sho' is a scam:
San Fran: http://sfbay.craigslist.org/sby/ctd/2107977800.html
Austin, TX: http://austin.craigslist.org/ctd/2107743062.html
...and a bunch more.
yeah, typically on craigslist if it is too good to be true, it probably is.
-
http://columbusga.craigslist.org/pts/2112552338.html
-
http://columbusga.craigslist.org/pts/2112552338.html
For 90-06 Jeep Cherkee XJ {ehm} {ehm} {ehm}
-
http://columbusga.craigslist.org/pts/2112552338.html
For 90-06 Jeep Cherkee XJ {ehm} {ehm} {ehm}
You took that out of context old man. {poke}
-
http://columbusga.craigslist.org/pts/2112552338.html
For 90-06 Jeep Cherkee XJ {ehm} {ehm} {ehm}
You took that out of context old man. {poke}
His punctuation just sucks as bad as my spelling and grammar. :D
-
http://bham.craigslist.org/pts/2125207096.html
-
Trail Rig Start
http://cgi.ebay.com/ebaymotors/Jeep-wrangler-easy-fix-/160522993198?pt=US_Cars_Trucks&hash=item255fea7e2e#ht_500wt_1101
-
Dang, I'll be curious to see what it gets to over the next few days.
-
Dang, I'll be curious to see what it gets to over the next few days.
Yep, I'll bet it was Colorado Rental Jeep. :)
-
Colorado is a long drive but could you imagine a jk with a 390 and ford 60's? Sounds bad as$
-
Colorado is a long drive but could you imagine a jk with a 390 and ford 60's? Sounds bad as$
Come on Richard lets think real. LS7 and front and rear steer 14 bolts with RCV's. {letseat} {hihi}
-
Colorado is a long drive but could you imagine a jk with a 390 and ford 60's? Sounds bad as$
Come on Richard lets think real. LS7 and front and rear steer 14 bolts with RCV's. {letseat} {hihi}
X2
-
Im not a gm fan but the ls7 is sweet just to many people are doing them. I really want to build a 460 rig. I love bb power. {letseat}
-
2500psi honda pressure washer: $50. Says it is in good working order. good deal for one of you north-side guys. {toast}
http://atlanta.craigslist.org/nat/tls/2135028091.html (http://atlanta.craigslist.org/nat/tls/2135028091.html)
-
that is a good deal!
-
http://atlanta.craigslist.org/sat/cto/2129613510.html
-
http://atlanta.craigslist.org/sat/cto/2129613510.html
There you go Ryan thats what you need {toast}
-
http://atlanta.craigslist.org/sat/cto/2129613510.html
There you go Ryan thats what you need {toast}
man only if it were 4x4, id be all over it. ....
-
http://atlanta.craigslist.org/sat/cto/2129613510.html
There you go Ryan thats what you need {toast}
man only if it were 4x4, id be all over it. ....
With a locker it would be {nln}
-
heck mine was a better deal!
-
heck mine was a better deal!
To somebody yes but not everybody wants a modded truck and there is 7,000 difference in your truck and this one.
-
I like that one you posted Mark.
Here's a deal for you bargain shoppers. 24 valve cummins for $750.
http://atlanta.craigslist.org/eat/cto/2133103535.html
-
I like that one you posted Mark.
Here's a deal for you bargain shoppers. 24 valve cummins for $750.
http://atlanta.craigslist.org/eat/cto/2133103535.html
if its a lift pump its a great deal, if its an injection pump its an ok deal.
-
heck mine was a better deal!
in dropped mine down to $15k before i traded it... got that in trade though so doesnt matter to me... i know everyone doesnt want a modded truck... but for what it had it was still a better deal to someone who did want one...
To somebody yes but not everybody wants a modded truck and there is 7,000 difference in your truck and this one.
-
I like that one you posted Mark.
Here's a deal for you bargain shoppers. 24 valve cummins for $750.
http://atlanta.craigslist.org/eat/cto/2133103535.html
if its a lift pump its a great deal, if its an injection pump its an ok deal.
injector pump isnt but $800 rebuild by bosch at the cummins dealer for them... i had to buy one from my 98... bought a 01 model since they were the HO version for about a 50hp difference and the same price... that motors worth that...
-
great deal here...
http://atlanta.craigslist.org/nat/cto/2144758934.html
-
great deal here...
http://atlanta.craigslist.org/nat/cto/2144758934.html
Dang thats a good deal. Buy that and a running XJ and swap in the running gear. {letseat}
-
Man, if I already had my garage, I'd buy that in a heart beat, slap a YJ grill on it, and swap out the stuff from my XJ just for shits and giggles.
-
i just saw a 99 XJ on about 4.5 of lift running and driving on craigslist for $500... but its in frickin WI!!!!
-
great deal here...
http://atlanta.craigslist.org/nat/cto/2144758934.html
Dang thats a good deal. Buy that and a running XJ and swap in the running gear. {letseat}
I WANT! {letseat}
I just don't have the tools or the know how to finish it... {boohoo} 12volt electrical confuses me for some reason, but I can understand and have done residential and industrial electrical quite a bit. {ehm}
-
http://atlanta.craigslist.org/atl/cto/2147514552.html
Jeep has 166k miles but looks good... i texted the guy and he said he'd consider 6500 for it... show him 55 100$ bills and he'd probably take it... id say that'd be a good damn deal
-
http://columbusga.craigslist.org/pts/2142362721.html
-
Steel
http://atlanta.craigslist.org/nat/mat/2179318117.html
-
So maybe someone that knows way more about trailers can steer me with this one...
http://atlanta.craigslist.org/nat/pts/2178998766.html
I'm thinking steer clear because of the mobile home axles and the rotted wood, but at the same time $400 for a frame and a trailer that I could maybe use for some of the closer parks until I could put real axles under it...
:hlp
-
So maybe someone that knows way more about trailers can steer me with this one...
http://atlanta.craigslist.org/nat/pts/2178998766.html
I'm thinking steer clear because of the mobile home axles and the rotted wood, but at the same time $400 for a frame and a trailer that I could maybe use for some of the closer parks until I could put real axles under it...
:hlp
I saw that tonight and thought the same thing, then I realized it had mobile home axles
-
So maybe someone that knows way more about trailers can steer me with this one...
http://atlanta.craigslist.org/nat/pts/2178998766.html
I'm thinking steer clear because of the mobile home axles and the rotted wood, but at the same time $400 for a frame and a trailer that I could maybe use for some of the closer parks until I could put real axles under it...
:hlp
You can change the axles and put new wood on like I did 3 2x8 on each side. Also looks like the trailer has no springs
-
Can't really tell but it looks like it may be bent.
-
Yep right rear looks that way
-
Sounds like I'll keep looking. Thanks guys. {toast}
-
Sounds like I'll keep looking. Thanks guys. {toast}
I paid about $500 for my trailer and it needed 2 tires ($180), lights ($40) and brakes ($80).
-
anyone going to PA? lol...
http://philadelphia.craigslist.org/cto/2149474086.html
-
anyone going to PA? lol...
http://philadelphia.craigslist.org/cto/2149474086.html
That's about all those axles are worth, they aren't the D70's that are useful to us. They are; Course spline, closed knuckle, drum brakes.
-
4:88's and install kits
http://atlanta.craigslist.org/atl/pts/2124987129.html
-
4:88's and install kits
http://atlanta.craigslist.org/atl/pts/2124987129.html
he has had them listed for awhile now... im sure he would take less if someone else was interested...
i need 4.88's for a dana 60 front if anyone finds any!
-
Seems like a good deal
http://macon.craigslist.org/cto/2201785929.html
-
Parts CJ Free...
http://atlanta.craigslist.org/atl/zip/2205853306.html
-
someone flagged it... dummies...
-
Went to the east PAP today and they had a CJ5 and CJ7 if anyone needs some parts.
-
Parts CJ Free...
http://atlanta.craigslist.org/atl/zip/2205853306.html
scam!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-
http://atlanta.craigslist.org/nat/pts/2207470022.html
$100 AX-15 http://atlanta.craigslist.org/nat/pts/2209203568.html
4.10 YJ axles... $200 http://atlanta.craigslist.org/nat/pts/2204704097.html
YJ V8 conversion kit http://atlanta.craigslist.org/eat/pts/2190921031.html
-
http://www.jeepsunlimited.com/forums/showthread.php?t=537300
-
http://atlanta.craigslist.org/nat/pts/2219762899.html
Is this a good deal?
-
yeah get them before they are gone. {toast}
-
hey guys i found some re centered 8x6.5 CHROME H1 wheels on there yesterday... ill see if i can find the link... and two of them have the beadlocks...
-
http://atlanta.craigslist.org/eat/pts/2200614571.html
found them... i need 8x170 otherwise id start wheelin and dealin...
-
very good deal!
-
heck of a deal on some MT classic II's and 39.5's
http://www.gon.com/marketplace/listings/13593/f250_f350_wheels_tires_39_5_super_swampers
-
79 bronco with some mods for pretty cheap...
http://www.gon.com/marketplace/listings/13139/79_bronco_hog_truck_mud_truck_fun_truck
-
heck of a deal on some MT classic II's and 39.5's
http://www.gon.com/marketplace/listings/13593/f250_f350_wheels_tires_39_5_super_swampers
Those tires Suc* I would rather have thornturds. IMO
-
lol... i dont like them either... performance wise... but i dont like MT classic II's for performance either... just for the size and all its a good price... i guess more or less for a mallcrawler...
-
http://atlanta.craigslist.org/atl/pts/2227921946.html
Dana 44 / Ford 9" $750
I spoke w/ him earlier today and i believe he'll take less.
-
anyone have 5k for a Jeep...
http://savannah.craigslist.org/cto/2229326326.html
and
http://savannah.craigslist.org/cto/2229650049.html
-
May have to give that guy a call. With summer coming up been thinking about getting another Jeep to mall crawl in. Wonder if it looks that good in person?
-
another good deal on some H1's not recentered and abunch of 37's for them...
http://columbusga.craigslist.org/pts/2220331755.html
-
4x4 MJ could probly get for a grand...
http://columbusga.craigslist.org/cto/2232913080.html
-
6 lug dana 44 rear with 4.56's
http://columbusga.craigslist.org/pts/2164460803.html
-
http://macon.craigslist.org/cto/2246556565.html
seems like a great deal!
-
ranger with chevy axles... 39's and 5.13's... asking $3k in a different listing...
http://macon.craigslist.org/cto/2241781746.html
-
http://www.southernjeeps.org/phpbb/viewtopic.php?t=36235&highlight=
-
Good deal, if it is not a scam.
http://www.cars.com/go/search/detail.jsp?tracktype=usedcc&csDlId=&csDgId=&listingId=61033210&listingRecNum=5&criteria=prMx%3D10000%26sf1Dir%3DASC%26prMn%3D1000%26alMdId%3D22306%26mkId%3D20021%26stkTyp%3DU%26mdId%3D22306%26rd%3D100000%26crSrtFlds%3DstkTypId-feedSegId-mkId-mdId-pseudoPrice-pseudoYear%26zc%3D31008%26rn%3D0%26PMmt%3D1-1-0%26stkTypId%3D28881%26sf2Dir%3DASC%26sf1Nm%3Dprice%26yrMn%3D1998%26sf2Nm%3Dmiles%26yrMx%3D2006%26alMkId%3D20021%26rpp%3D50%26feedSegId%3D28705&aff=national
-
http://atlanta.craigslist.org/nat/pts/2248957025.html
-
found a guy on CL here in griffin/williamson area... has 2in angle iron 20ft sticks for 20 bucks... i just bought 4 and he cut them in half for me... off to strip my unibody and start welding them in! its all been kept in his shop so not rusted up or nothing... hes got probly 100 sticks or something... PM me if ya want a number...
-
Travis what is the thickness?
-
Travis what is the thickness?
X2, I'm in for a stick or two.
-
get me his # as well please
-
Heck didn't know there would be this much Intrest or I would have just put it here... 770-468-6524 is his number... nice Guy forget his name but looks like the hero Guy with the shovel on Home Alone... lol... I haven't measured thickness bit I'd say 1/8th or 3/16's... not 1/4in I know... plenty strong for trailer rails or anything like that...
Richard if you want he will cut them to 10ft sticks for me and I can load them in the truck and drop them off one day after work since your on the way... and if any of these guys are friends of yours then ill do the same for them and drop them off with ya but that's up to you man... just let me know!
-
http://atlanta.craigslist.org/eat/pts/2279050610.html
-
http://dothan.craigslist.org/pts/2287966703.html
-
http://www.jeepforum.com/forum/f126/d44-rubicon-rear-axle-1183702/
-
jk 4 door soft top $250:
http://atlanta.craigslist.org/atl/pts/2291720931.html (http://atlanta.craigslist.org/atl/pts/2291720931.html)
-
http://atlanta.craigslist.org/sat/pts/2293236633.html
-
97 jeep for $1000 obo needs money...
http://atlanta.craigslist.org/atl/cto/2293437880.html
i txted for pics and if i get them ill post here...
-
http://atlanta.craigslist.org/atl/pts/2291536987.html
39.5's boggers like new I saw a pic... the H1's are recentered as well for 8x6.5... a gradation deal... dude also has 44's 16.5's...
-
http://valdosta.craigslist.org/pts/2290674715.html
14bolt ff 4.56 gears, with detroit says it only has 30k miles on it. $500
-
http://bb.tennesseeoffroad.com/ubbthreads.php?ubb=showflat&Number=146374#Post146374
AMAZING DEAL if it is truly a front 60... i sent him a PM so we'll see.
-
http://naxja.org/forum/showthread.php?t=1059507
-
http://naxja.org/forum/showthread.php?t=1059507
Already gone.
-
Knew those wouldn't last long.
-
http://macon.craigslist.org/pts/2329898457.html
-
http://macon.craigslist.org/pts/2329898457.html
I would have bought those when I was looking for tires. That's a good buy.
-
sent an email {popcorn}
-
sent an email {popcorn}
good, keep me from buying them...unless you would rather have some 36" TSLs...?
-
He has them, 4, look great, tires only. 2 hours south of Atlanta. I just cant do it though. Not enough money to build the Jeep for 37's. Ill stick to 35's for this next tire change and start the build to handle 37's.
Go get em {toast}
-
http://houston.craigslist.org/cto/2260602334.html {ehm}
-
needs more lift!
-
http://houston.craigslist.org/cto/2260602334.html {ehm}
Go get it Ryan. {toast}
-
http://houston.craigslist.org/cto/2260602334.html {ehm}
Go get it Ryan. {toast}
Right up his ally ain't it... :o :o
As far as an xj on rocks goes though, that could be the least ghetto example I've seen. {hihi}
-
Dana 44 Detroit, 4.88's in Marietta
http://atlanta.craigslist.org/nat/pts/2333648163.html
-
{toast} {toast} http://atlanta.craigslist.org/wat/cto/2335319717.html {toast} {toast}
-
30 MPG?!?!?!
-
http://atlanta.craigslist.org/nat/cto/2337441898.html
-
Thats alot for a rebuilt title.
-
Not CL, but:
http://www.southernjeeps.org/phpbb/viewtopic.php?t=36568&highlight=&sid=a403cf57a124ad48b8e879de40186b17
Bumper -- 5288120 jeep tj
End Cap -- 55175104 55155760AB jeep tj
End Cap -- 55175105 55155761AB jeep tj
Coil -- 56028173 2.5 or 4.0 Tj,Cherokee Certain Years 30,200 miles
Distributor -- 56041033 2.5 4cyl tj 30,200 miles
Fuel Rail with Injectors-- 53030778 2.5 4cyl tj,Cherokee certain years 30,200 miles
Throttle Body with all sensor's --- 53032016 2.5 4cyl tj, Cherokee 30,200 miles
Park Signal lens -- 55156488 right side tj
Park Signal lens -- 55156489 left side tj
Aluminum Valve Cover-- 8933003689 4.2 6cyl 258 6cyc cj
Starter -- 56027904 2.5 4cyl tj Cherokee
Alternator -- believe 2.5 4cyl and may work on 4.0 6cyl
Hitch Assembly -- cj May work on Yj ,TJ never mounted
Power Steering Pump -- believe it's yj also may fit tj
Alternator with Bracket -- cj
Drive shaft Front 40 inches collapsed -- not sure
NP 207 Transfer Case -- XJs some yj
Air Resonator Box -- believe for Cherokee
-
http://hardlinecrawlers.com/forums/index.php?topic=11691.0
-
idk if anyone posted this but... http://macon.craigslist.org/pts/2313261800.html
-
idk if anyone posted this but... http://macon.craigslist.org/pts/2313261800.html
Them are scrap yard axles. {toast}
-
http://atlanta.craigslist.org/atl/pts/2351872297.html
-
How 'bout this one?
http://macon.craigslist.org/cto/2300407584.html
-
Good deal???
http://macon.craigslist.org/cto/2351515890.html
-
How 'bout this one?
http://macon.craigslist.org/cto/2300407584.html
Its not a 93 its a 95. I've had a few hit on it but I've decided to keep it for a while.
Sent from my DROIDX using Tapatalk
-
Good deal???
http://macon.craigslist.org/cto/2351515890.html
$3500 for an 87 with a bad trans? can I have some of what he's smoking?
-
How 'bout this one?
http://macon.craigslist.org/cto/2300407584.html
Its not a 93 its a 95. I've had a few hit on it but I've decided to keep it for a while.
Sent from my DROIDX using Tapatalk
I wondered how long the posting would be up before you said that...
-
Good deal???
http://macon.craigslist.org/cto/2351515890.html
$3500 for an 87 with a bad trans? can I have some of what he's smoking?
Me too :D
-
{toast}http://atlanta.craigslist.org/atl/pts/2375435638.html {toast}
I'd get em, but picked up another bike {letseat}
-
{toast}http://atlanta.craigslist.org/atl/pts/2375435638.html (http://atlanta.craigslist.org/atl/pts/2375435638.html) {toast}
I'd get em, but picked up another bike {letseat}
links please
-
and its been deleted
-
http://atlanta.craigslist.org/nat/cto/2371875826.html
A friend of a friend's rig. If I had the money, I'd probably grab it, would be a good start. {toast}
-
http://atlanta.craigslist.org/nat/cto/2371875826.html
A friend of a friend's rig. If I had the money, I'd probably grab it, would be a good start. {toast}
lower it, stretch it, add some sheet metal and it would be sick rig. {toast}
-
Pretty much what I was thinking. {popcorn}
-
gotta love craigslist...
2 6000 pound galvanized 2in drop axles with hydraulic brakes and hub assembly style
2 aluminum fender skirts (one big one each side)
2 galvanized long flat ramps
4 15in steel wheels
$550 including 4 hours total trip worth of gas...
cant complain at all!
-
http://www.southernjeeps.org/phpbb/viewtopic.php?t=36683 (http://www.southernjeeps.org/phpbb/viewtopic.php?t=36683)
-
thats a good deal on some 36s
-
http://atlanta.craigslist.org/wat/pts/2377642732.html (http://atlanta.craigslist.org/wat/pts/2377642732.html)
not a bad deal on some 37's if you aren't afraid of cutting into them. {letseat}
-
http://atlanta.craigslist.org/wat/pts/2377642732.html (http://atlanta.craigslist.org/wat/pts/2377642732.html)
not a bad deal on some 37's if you aren't afraid of cutting into them. {letseat}
I e-mailed him the day it was posted and got not reply. I'm betting they're gone. {hihi}
-
Say's TSL's but picture is of Boggers, you are right about cutting them though. {toast}
-
http://atlanta.craigslist.org/nat/pts/2384294820.html
-
This looks familiar
http://atlanta.craigslist.org/eat/cto/2391648986.html
{ehm}
-
This looks familiar
http://atlanta.craigslist.org/eat/cto/2391648986.html
{ehm}
It's not Micheal's but it is part of the Eastside group. First thing I would do is weld those dang z-blocks shut. Flex like crazy but also unloads a lot in my opinion.
Micheal what is Mark going to wheel if he sells that.
-
He bought an XJ on tons with stickeys.
-
He bought an XJ on tons with stickeys.
Chuck getting a buggy, oh wait, he is getting a wife. {hihi} {hihi}
-
LOL naw he bought a blue one from a guy in Dallas
-
Mark, Michael, is that rig built well? i am actually looking at this pretty hard. {letseat}
-
Mark, Michael, is that rig built well? i am actually looking at this pretty hard. {letseat}
MIchael can tell you a lot more about it, I've only seen it once. The Z-blocks would have to go in my opinion.
-
Mark, Michael, is that rig built well? i am actually looking at this pretty hard. {letseat}
MIchael can tell you a lot more about it, I've only seen it once. The Z-blocks would have to go in my opinion.
I agree with Mark the z-boxes need to be welded closed and it could use a new set of springs but other then that it has been a good rig for Mark. Oh and its has alot of character.
-
And yes Chuck did get a buggy by the way! Its for sale also!
[attachment deleted by admin]
-
good deal?
http://atlanta.craigslist.org/wat/pts/2397487426.html (http://atlanta.craigslist.org/wat/pts/2397487426.html)
-
good deal?
http://atlanta.craigslist.org/wat/pts/2397487426.html (http://atlanta.craigslist.org/wat/pts/2397487426.html)
Although I don't know much about them, my '97 Grand had the DANA 44 rear and I was told it wasn't as good as the Wrangler 44 ???
My .02
-
Aren't those Grand Cherokee D44s aluminum? From doing some research when we got Kelly's WJ, they're better than a D35/8.25 but not as good as a Wrangler D44.
-
Cheap 44! But if it's no TJ 44, no bother in getting it. Looks like alot of fab work to make it work in a TJ.
-
Cheap 44! But if it's no TJ 44, no bother in getting it. Looks like alot of fab work to make it work in a TJ.
i know its better than a 35 but wasn't sure if it was a good deal for one of the GC guys for a cheap upgrade. {toast}
-
Elmo is for sale:
1964 Dodge WM300
professionally built mopar 408 stroker
eagle crank
lunati cam
340 j heads with 202 160 stainless valves
heavy duty rocker
on propane , set up for tanks
msd ignition
custom surpentine belt system
np 435 4 speed rebuilt 5/11
np 205 divorced
all inputs and outputs 32 spline
32 spline u bolt yokes
all u joints 1410
4 wheel steer
front axle rockwell
ouverson 2" 47 spline shafts
ouverson 2" spool
trail gear 10" steering ram
pinion brakes
easy button
rear axle rockwell
ouverson 2" 47 spline shafts
ouverson 2" spool
custom tierod less steering
pinion brakes
custom widened h1 double beadlocks
49" iroks
4 link front and rear
1 1/4 heims on lower links
3/4 heims on upper links
on board air with 2 gallon tank
power steering pump replaced with hydralic pump 9 gpm @2500 psi
5 gallon hydralic resevior
optima yellow top
kinetex 800amp power cell
warn 8274 winch with cab controls
ADJUSTABLE WHEEL BASE 110" TO 146"
amp set up for mp3 player
corbeau baja seats with 3" harness
rear steer and adjustable wheel base controled by 4 way joy stick
inner and outer cage
includes extra cab , sandblasted and ready for minor body work and painting,
includes windsheild frame and doors
has working lights, brakelight, and signals.
elmo is tagged and tittled in tennesse
truck has competed in settc and top truck
very fun to drive,very big, very tough
old dodge cabs are rather small, if you are over 5' 10" modifications will be need to drive comfortably.
$21,500 premiermech@blomand.net
[attachment deleted by admin]
-
Good deal on some new beadlocks, and I have a friend going there in a few weeks.
http://www.nc4x4.com/forums/showthread.php?t=113657
-
Elmo is for sale:
1964 Dodge WM300
Is that the truck that competed in the "Top Truck Challenge" in Hollister Hills, CA a couple years ago?
-
Elmo is for sale:
1964 Dodge WM300
Is that the truck that competed in the "Top Truck Challenge" in Hollister Hills, CA a couple years ago?
truck has competed in settc and top truck
-
Elmo is for sale:
1964 Dodge WM300
Is that the truck that competed in the "Top Truck Challenge" in Hollister Hills, CA a couple years ago?
yup, last years.
-
sweet rig. You will never see another that is for sure!
-
(http://images.craigslist.org/3n63m43l55V65T35W3b5k04691fdd318e17ec.jpg)
(http://images.craigslist.org/3n33k83l45Y15W55R1b5k41720a1b0ab81666.jpg)
1994 Wrangler, 4.0 motor, 5 spd, full width axles, dana 44 and ford 9, locked front and rear, beadlocks, 80% 39.5 iroks, find other ad for more details.... Possible trades on ?????? with cash preffed. Looking for 2008 newer 250f dirtbike. If your trade is not worth what mine is I will need some cash. Please no junk or projects. Call or text 678-859-four five four nine. Thanks Find my other ad for more details
http://atlanta.craigslist.org/eat/cto/2393481925.html
-
Yeah, I talked to the guy ab out trading jeeps. After thinking long and hard about mine for his and a little cash from his end, I passed. I just can't see giving mine away fro something I know nothing about. It is probably worth it but I love my jeep too much. It's a part of the fam.
-
If only it was an auto for unskilled guys like me!
-
Yeah, you would roll off the mountain in a stick ;D
-
http://atlanta.craigslist.org/eat/pts/2413809065.html
-
That won't last long at that price
-
Agreed. What's with the product placement? ::)
-
Agreed. What's with the product placement? ::)
Might be an amsoil dealer
-
{nln}
-
{nln}
Coming from the guy with a Rubicon Express Banner ~>} ;D
-
()() It works better than amzoil. ;D
-
()() It works better than amzoil. ;D
Not by much. {poke}
-
()() It works better than amzoil. ;D
Not by much. {poke}
WTH? ???
1994 Jeep Cherokee Trail rig F/T - $4000 (Taylorsville)
--------------------------------------------------------------------------------
2" lift
-Rusty's fixed LCA's
-Rubicon Express adjustable UCA's
-RE Extreme duty track bar, shortened and sleeved for the low lift
33x13.50 TSL's on true beadlocks
Spartan locker in front, welded 8.25 in rear
Rock sliders
Custom front bumper- made from 2x6x1/4" wall tubing
Protofab tire-carrier rear bumper
Dodge Durango steering box
C-rok steering box brace
MORE steering cross brace
V-8 ZJ Tierod upgrade
Gas tank has also been re-located to trunk area for clearance. All vent lines were ran and there have been no fumes in the cab.
I can provide many more pictures, show video, a build thread or any more details if needed or desired.
I'm looking for a trade for another semi-built 4x4 rather than an outright sale, before I cut this one up for an axle swap. It's currently a trailered trail rig, but has a clean title and only needs a few small things to be back on the road.
(http://images.craigslist.org/3n73k03pc5T65Q05P1b61532c8286bf8c1661.jpg)
-
()() It works better than amzoil. ;D
Not by much. {poke}
WTH? ???
1994 Jeep Cherokee Trail rig F/T - $4000 (Taylorsville)
--------------------------------------------------------------------------------
2" lift
-Rusty's fixed LCA's
-Rubicon Express adjustable UCA's
-RE Extreme duty track bar, shortened and sleeved for the low lift
33x13.50 TSL's on true beadlocks
Spartan locker in front, welded 8.25 in rear
Rock sliders
Custom front bumper- made from 2x6x1/4" wall tubing
Protofab tire-carrier rear bumper
Dodge Durango steering box
C-rok steering box brace
MORE steering cross brace
V-8 ZJ Tierod upgrade
Gas tank has also been re-located to trunk area for clearance. All vent lines were ran and there have been no fumes in the cab.
I can provide many more pictures, show video, a build thread or any more details if needed or desired.
I'm looking for a trade for another semi-built 4x4 rather than an outright sale, before I cut this one up for an axle swap. It's currently a trailered trail rig, but has a clean title and only needs a few small things to be back on the road.
(http://images.craigslist.org/3n73k03pc5T65Q05P1b61532c8286bf8c1661.jpg)
iws
Picture was taken at Choccolocca.
Explain Logan, please.
-
Not much has to be cut for an axle swap.. I only cut the lower control arm mounts and Jimmy cut the bump stop extension on his. Either could be back to stock pretty easy. {popcorn}
-
Not much has to be cut for an axle swap.. I only cut the lower control arm mounts and Jimmy cut the bump stop extension on his. Either could be back to stock pretty easy. {popcorn}
Does Ryan have you're log in. WTF
-
Easiest explanation I can give: {hihi}
Just seeing what kind of trades are out there. Maybe something with a real frame. {popcorn}
And the add has a pic from RR and one from today too, lol
-
Not much has to be cut for an axle swap.. I only cut the lower control arm mounts and Jimmy cut the bump stop extension on his. Either could be back to stock pretty easy. {popcorn}
Does Ryan have you're log in. WTF
Did you read the add? {popcorn}
-
Just seeing what kind of trades are out there. Maybe something with a real frame. {popcorn}
Frames are 8==D
-
Just seeing what kind of trades are out there. Maybe something with a real frame. {popcorn}
Frames are 8==D
'
You beat me to it.. Unless its a yota, yj, tj. Those have good frames. Im sure there are others but I would rather wheel an xj before I box in another "c" frame
-
Not much has to be cut for an axle swap.. I only cut the lower control arm mounts and Jimmy cut the bump stop extension on his. Either could be back to stock pretty easy. {popcorn}
Does Ryan have you're log in. WTF
Did you read the add? {popcorn}
Ryan has my log in, Ryan stop drunk posting on my log in. %)
-
Not much has to be cut for an axle swap.. I only cut the lower control arm mounts and Jimmy cut the bump stop extension on his. Either could be back to stock pretty easy. {popcorn}
When do I ever make anything that easy? I'm stretching the rear and will probably redo the front fenderwells, so lots of cutting for me to do one.
I'm kind of hoping someone with a Sami on Yota's will offer up a trade... Safe money is on I'll end up keeping the xj. {nln}
-
Yeah all 3 are good choices and with the xj you can carry xtra drunk people with you. (that was a Ryan post) I like the xj plat form so much that I will prob keep mine for a back up wheeler and use the yj for a back up to the back up. {hihi}
-
Yeah all 3 are good choices and with the xj you can carry xtra drunk people with you. (that was a Ryan post) I like the xj plat form so much that I will prob keep mine for a back up wheeler and use the yj for a back up to the back up. {hihi}
You've got to have a primary wheeler first. {popcorn}
-
I do I have Crystals wj {popcorn}
Ps honey Im just kidding. {toast}
-
Not much has to be cut for an axle swap.. I only cut the lower control arm mounts and Jimmy cut the bump stop extension on his. Either could be back to stock pretty easy. {popcorn}
When do I ever make anything that easy? I'm stretching the rear and will probably redo the front fenderwells, so lots of cutting for me to do one.
I'm kind of hoping someone with a Sami on Yota's will offer up a trade... Safe money is on I'll end up keeping the xj. {nln}
I'd love to have a mild built 85 4 runner.
-
Not much has to be cut for an axle swap.. I only cut the lower control arm mounts and Jimmy cut the bump stop extension on his. Either could be back to stock pretty easy. {popcorn}
When do I ever make anything that easy? I'm stretching the rear and will probably redo the front fenderwells, so lots of cutting for me to do one.
I'm kind of hoping someone with a Sami on Yota's will offer up a trade... Safe money is on I'll end up keeping the xj. {nln}
I'd love to have a mild built 85 4 runner.
Trade the "RAT" {toast}
-
Not much has to be cut for an axle swap.. I only cut the lower control arm mounts and Jimmy cut the bump stop extension on his. Either could be back to stock pretty easy. {popcorn}
When do I ever make anything that easy? I'm stretching the rear and will probably redo the front fenderwells, so lots of cutting for me to do one.
I'm kind of hoping someone with a Sami on Yota's will offer up a trade... Safe money is on I'll end up keeping the xj. {nln}
I'd love to have a mild built 85 4 runner.
Trade the "RAT" {toast}
Sold it on Craigslist about two weeks ago.
-
dango man, i love drunk posting, ist the best!!!!! :smoke
-
Elmo is for sale:
1964 Dodge WM300
professionally built mopar 408 stroker
eagle crank
lunati cam
340 j heads with 202 160 stainless valves
heavy duty rocker
on propane , set up for tanks
msd ignition
custom surpentine belt system
np 435 4 speed rebuilt 5/11
np 205 divorced
all inputs and outputs 32 spline
32 spline u bolt yokes
all u joints 1410
4 wheel steer
front axle rockwell
ouverson 2" 47 spline shafts
ouverson 2" spool
trail gear 10" steering ram
pinion brakes
easy button
rear axle rockwell
ouverson 2" 47 spline shafts
ouverson 2" spool
custom tierod less steering
pinion brakes
custom widened h1 double beadlocks
49" iroks
4 link front and rear
1 1/4 heims on lower links
3/4 heims on upper links
on board air with 2 gallon tank
power steering pump replaced with hydralic pump 9 gpm @2500 psi
5 gallon hydralic resevior
optima yellow top
kinetex 800amp power cell
warn 8274 winch with cab controls
ADJUSTABLE WHEEL BASE 110" TO 146"
amp set up for mp3 player
corbeau baja seats with 3" harness
rear steer and adjustable wheel base controled by 4 way joy stick
inner and outer cage
includes extra cab , sandblasted and ready for minor body work and painting,
includes windsheild frame and doors
has working lights, brakelight, and signals.
elmo is tagged and tittled in tennesse
truck has competed in settc and top truck
very fun to drive,very big, very tough
old dodge cabs are rather small, if you are over 5' 10" modifications will be need to drive comfortably.
$21,500 premiermech@blomand.net
Looks like elmo might be coming off the price some.
[attachment deleted by admin]
-
Saw that a few minutes ago, statement made "Looks like Elmo took his last ride" RIP Elmo, can't wait to see Rogers next ride. {toast}
-
Least my uppers are 1.25 and not .75 like his {hihi}
-
Saw that a few minutes ago, statement made "Looks like Elmo took his last ride" RIP Elmo, can't wait to see Rogers next ride. {toast}
Rogers building a buggy this time. {toast}
-
Where is that pick from? Looks killer!
-
Hale Mountain
-
Looks awesome. We need to add this one to the list of places!
-
http://jkowners.com/forum/showthread.php?t=50072
-
{toast}
-
http://jkowners.com/forum/showthread.php?t=50072
There used to be a Scrambler almost identical to that one that hung out at Tellico
-
Yup. I remember that one. DAMN IT TROUT F'S!
-
http://macon.craigslist.org/mcy/2429508844.html
2000 Kawasaki Ninja ZX-600R 3750 miles - $2500
This really is a good deal! Belongs to a friend of mine. Bike is immaculate and runs perfect. If anyone is looking for one. KBB average value is $2900.
Pics will be added to the Craigslist ad this evening.
-
Good deal
http://atlanta.craigslist.org/nat/cto/2436900413.html
-
Good deal
http://atlanta.craigslist.org/nat/cto/2436900413.html
Dana 60's to help get ground clearance. {ehm} {ehm}
-
Good deal
http://atlanta.craigslist.org/nat/cto/2436900413.html
Dana 60's to help get ground clearance. {ehm} {ehm}
I was thinking the same thing...
-
http://macon.craigslist.org/cto/2386951285.html
i laughed when i saw the heading.
-
:D Wonder what he used to drive to consider that a gas saver??
-
probly someone one here but...
http://atlanta.craigslist.org/atl/pts/2446737946.html
-
Yeah it's chucks he has it posted on here.
-
i figured he would be on here... txted him today about getting some stuff... just gotta make it over there...
-
{hihi} {hihi}
http://chattanooga.craigslist.org/cto/2422553381.html (http://chattanooga.craigslist.org/cto/2422553381.html)
-
{hihi} {hihi}
http://chattanooga.craigslist.org/cto/2422553381.html (http://chattanooga.craigslist.org/cto/2422553381.html)
I'm gonna need the specs on that body lift. {ehm}
-
The price is more retarded than someone saying an XJ has a body lift.
-
its amazing how many times ive read people claiming a body lift... cracks me up... and its probly worth $300... if that...
-
fail:
http://atlanta.craigslist.org/nat/pts/2463216326.html (http://atlanta.craigslist.org/nat/pts/2463216326.html)
-
fail:
http://atlanta.craigslist.org/nat/pts/2463216326.html (http://atlanta.craigslist.org/nat/pts/2463216326.html)
It says call or text, ha ha! Like u could read a text from him. {hihi}
-
fail:
http://atlanta.craigslist.org/nat/pts/2463216326.html (http://atlanta.craigslist.org/nat/pts/2463216326.html)
It says call or text, ha ha! Like u could read a text from him. {hihi}
Cartersville... {no}
-
I've bought a lot of things I thought were "Warm", but never paid $200 more than what they cost new. {hihi}
-
http://atlanta.craigslist.org/atl/rvs/2471735324.html {ehm} need picks!
-
Here you go Ben!
(http://media.cygnus.com/files/cygnus/image/PTEN/2008/JUN/300x300/4piecematcohookpicksetno_10101535.png)
Hope that helps!
-
{hihi}
-
{nln} ()()
-
http://cgi.ebay.com/ebaymotors/1995-Jeep-Cherokee-DIESEL-4x4-Lifted-RARE-/270777599385?pt=US_Cars_Trucks&hash=item3f0b9a4599&clk_rvr_id=246252680152
like the one i was building but ditched cause i started back in school and it was costing to much... mine was turbod though...
-
cool build. I know it's slow :D
-
Probably worth checking out.
http://atlanta.craigslist.org/atl/pts/2485348289.html
-
should be a spring perched d44...
-
should be a spring perched d44...
Unless it's a snowfighter edition, not absolutely sure of the years of those though. Jimmy got his 60's off of a similar situation, hence why I said it may be worth checking out.
-
should be a spring perched d44...
Unless it's a snowfighter edition, not absolutely sure of the years of those though. Jimmy got his 60's off of a similar situation, hence why I said it may be worth checking out.
Don't believe the "Snowfighter" was offered until '77 1/2 thru '79
-
76 should be closed knuckle 44 too.
-
76 should be closed knuckle 44 too.
True Dat
-
nevermind... thought he said 75 so was thinking drums... but 76 was discs... would be kingpin if it was a 60 though... easy to tell in a quick pic or phone call... then the front axle turns into a $1200 axle by itself... lol...
i txted him and will find out... wondering now...
-
76 should be closed knuckle 44 too.
I look at it as people get the years mixed up. The guy I bought my 60 from listed it as an 03-04, but The BOM reads 02 and the 9" sitting in the shop supposedly came from a 79 F-150, but is 28 spline. {ehm}
That's why I thought it may be worth someone on here checking out.
-
It's a 44... After txting him...
-
http://atlanta.craigslist.org/atl/cto/2491180028.html (http://atlanta.craigslist.org/atl/cto/2491180028.html) {hihi} {hihi} 30mpg {ehm}
-
No way that could be a scam
-
http://atlanta.craigslist.org/atl/pts/2480905758.html
-
http://atlanta.craigslist.org/atl/pts/2480905758.html
I looked at those earlier. May be neat when the TJ version comes out.
-
looks like a clean 86 XJ with a bit rare of a paint job... wonder if its factory or not? looks factory style but ive never seen anything like it on a XJ....
http://atlanta.craigslist.org/atl/cto/2497943359.html
-
looks like a clean 86 XJ with a bit rare of a paint job... wonder if its factory or not? looks factory style but ive never seen anything like it on a XJ....
http://atlanta.craigslist.org/atl/cto/2497943359.html
hood looks like rattle can. {toast}
-
Also its missing the idler pulley between the ac and the ps pump.
-
lol... looked better on my phone... not sure how the 4 bangers pulley system is setup though...
-
http://atlanta.craigslist.org/eat/cto/2493902482.html (http://atlanta.craigslist.org/eat/cto/2493902482.html) {ehm}
http://www.southernjeeps.org/phpbb/viewtopic.php?t=36955 (http://www.southernjeeps.org/phpbb/viewtopic.php?t=36955) :'(
-
{no}
-
http://atlanta.craigslist.org/eat/cto/2493902482.html (http://atlanta.craigslist.org/eat/cto/2493902482.html) {ehm}
http://www.southernjeeps.org/phpbb/viewtopic.php?t=36955 (http://www.southernjeeps.org/phpbb/viewtopic.php?t=36955) :'(
I just posted it up to see what I can get for it, if the right offer comes along I may sell it. I just dont think I will have the time or money to go wheeling when I'm in school for the next 2 years and if I do sell it I will buy an LJ when I graduate {letseat}
I would also like to sell it to someone who will use it the way it is meant to be used so if anyone knows someone looking for a good all around jeep (or 94 mustang GT) please send them my way. {toast}
-
http://atlanta.craigslist.org/eat/cto/2493902482.html (http://atlanta.craigslist.org/eat/cto/2493902482.html) {ehm}
http://www.southernjeeps.org/phpbb/viewtopic.php?t=36955 (http://www.southernjeeps.org/phpbb/viewtopic.php?t=36955) :'(
I just posted it up to see what I can get for it, if the right offer comes along I may sell it. I just dont think I will have the time or money to go wheeling when I'm in school for the next 2 years and if I do sell it I will buy an LJ when I graduate {letseat}
I would also like to sell it to someone who will use it the way it is meant to be used so if anyone knows someone looking for a good all around jeep (or 94 mustang GT) please send them my way. {toast}
Translation: I have a girlfriend. {toast}
-
I will buy an LJ
{toast}
-
LJ guys.
http://hardlinecrawlers.com/forums/index.php?topic=12603.0
-
http://atlanta.craigslist.org/eat/cto/2493902482.html (http://atlanta.craigslist.org/eat/cto/2493902482.html) {ehm}
http://www.southernjeeps.org/phpbb/viewtopic.php?t=36955 (http://www.southernjeeps.org/phpbb/viewtopic.php?t=36955) :'(
I just posted it up to see what I can get for it, if the right offer comes along I may sell it. I just dont think I will have the time or money to go wheeling when I'm in school for the next 2 years and if I do sell it I will buy an LJ when I graduate {letseat}
I would also like to sell it to someone who will use it the way it is meant to be used so if anyone knows someone looking for a good all around jeep (or 94 mustang GT) please send them my way. {toast}
Translation: I am single, like anything with a motor and brunettes with big {hooters}. {toast}
fixed it for ya. {toast}
-
LJ guys.
http://hardlinecrawlers.com/forums/index.php?topic=12603.0
That CJ tailgate would make a great drop down conversion gate.
-
Got to do somethin with that big ole tire J.
-
As much as I want to fight it, it will end up on a bumper at some point
-
:P
-
Get him down a few hundred and it would be a solid builder.
http://macon.craigslist.org/cto/2472066773.html
-
http://athensga.craigslist.org/pts/2514993292.html I can pick them up {popcorn}
-
http://athensga.craigslist.org/pts/2514993292.html I can pick them up {popcorn}
Sweet find, you should run them Ben. {toast}
-
Not with my little axles. I would not feel comfortable giving the girl the gas anymore!
-
Ben do u know who is selling the tires,I sent an email to them but no response,Jon
-
Must have sold them. It is deleted.
-
Lawton... http://atlanta.craigslist.org/nat/pts/2526509891.html
-
http://atlanta.craigslist.org/nat/ctd/2528262100.html
-
http://atlanta.craigslist.org/nat/ctd/2528262100.html
Man if only it wasn't a dually, but I could buy it fix it and make some coin on it.
-
i wish i could buy this thing... he sent me a bunch more pics and it really is mint... even has the original spare tire cover and cargo cover in it... paints original and looks great... really kept up with it... dont see the waggys like this... even though red/wood grain is pretty ugly... lol... also i dont think ive ever seen a Wagoneer Limited... its fully loaded with the leather electric seats on both sides and everything...
http://atlanta.craigslist.org/sat/cto/2519859997.html
-
i wish i could buy this thing... he sent me a bunch more pics and it really is mint... even has the original spare tire cover and cargo cover in it... paints original and looks great... really kept up with it... dont see the waggys like this... even though red/wood grain is pretty ugly... lol... also i dont think ive ever seen a Wagoneer Limited... its fully loaded with the leather electric seats on both sides and everything...
http://atlanta.craigslist.org/sat/cto/2519859997.html
Am I missing something? Did they make an XJ called a Wagoneer?
-
i wish i could buy this thing... he sent me a bunch more pics and it really is mint... even has the original spare tire cover and cargo cover in it... paints original and looks great... really kept up with it... dont see the waggys like this... even though red/wood grain is pretty ugly... lol... also i dont think ive ever seen a Wagoneer Limited... its fully loaded with the leather electric seats on both sides and everything...
http://atlanta.craigslist.org/sat/cto/2519859997.html
Am I missing something? Did they make an XJ called a Wagoneer?
Yup, in the late 80's-earlier 90's
Idk what the attraction of a mint xj is though. They're not classics, not pretty, not fast... I guess I'm jaded and just see them as semi-disposable wheelers
-
Yep, but it never lived up to its namesake.
-
even though red/wood grain is pretty ugly
http://atlanta.craigslist.org/sat/cto/2519859997.html
What's wrong with wood grain?
Haha
-
i wish i could buy this thing... he sent me a bunch more pics and it really is mint... even has the original spare tire cover and cargo cover in it... paints original and looks great... really kept up with it... dont see the waggys like this... even though red/wood grain is pretty ugly... lol... also i dont think ive ever seen a Wagoneer Limited... its fully loaded with the leather electric seats on both sides and everything...
http://atlanta.craigslist.org/sat/cto/2519859997.html
Am I missing something? Did they make an XJ called a Wagoneer?
Yup, in the late 80's-earlier 90's
Idk what the attraction of a mint xj is though. They're not classics, not pretty, not fast... I guess I'm jaded and just see them as semi-disposable wheelers
ive known all about the wagoneers... just dont think ive seen one thats a wagoneer AND a limited... just like ive never seen a country edition/sport... lol... i think pretty much any vehicle thats untouched and clean as new and over 20 years old at least a few cool points... even better when its something thats relatively rare and 4x4...
-
Not CL but good deal...
http://www.jeepforum.com/forum/f125/37x12-50x15-goodyear-mtr-w-wheels-staun-internal-beadlocks-1253134/
-
ive actually seen this thing in person... i bought a Warn brush guard with a Warn 9000 on it from him for $600 of GON... kept the winch and sold the brush guard for $300... lol... its pretty dang nice but anyone should expect that considering hes asking the same amount as most 3 bedroom houses are these days... lol
http://atlanta.craigslist.org/atl/cto/2479496354.html
-
What a waste of a good hummer.
-
http://atlanta.craigslist.org/nat/cto/2544895252.html
-
What a waste of a good hummer.
I love any kind of hummers. {hihi}
-
http://atlanta.craigslist.org/nat/cto/2544895252.html
thats a good deal... i should buy it and part it out... lol...
-
What a waste of a good hummer.
not as bad as this kid on cherokeeforum who says hes gonna put a H1 suspension under his XJ... lol... waste of both vehicles only to realise its just never gonna work... and makes no sense to do it... lol...
-
pretty good deal if its actually a rubi...
http://atlanta.craigslist.org/atl/cto/2551466595.html (http://atlanta.craigslist.org/atl/cto/2551466595.html)
-
pretty good deal if its actually a rubi...
http://atlanta.craigslist.org/atl/cto/2551466595.html (http://atlanta.craigslist.org/atl/cto/2551466595.html)
No rubicons in 2000
-
i hate folks that put rubi stickers on a non-rubi... its like sticking SS stickers on a V6 camero...
-
pretty good deal if its actually a rubi...
http://atlanta.craigslist.org/atl/cto/2551466595.html (http://atlanta.craigslist.org/atl/cto/2551466595.html)
No rubicons in 2000
yeah didnt think so.
-
http://macon.craigslist.org/cto/2537098433.html
-
http://naxja.org/forum/showthread.php?t=1067237
-
http://naxja.org/forum/showthread.php?t=1067237
Dang what a steal. No shafts included must be why its so cheap. I should get that.
-
Info on these axles... new to me but seems like a good price.
http://greenville.craigslist.org/pts/2543547187.html
-
I could be wrong but I think dodge front axles have the vacuum two piece shafts.
-
i cant see the post, but i have a front dodge- its not vac
-
Yours is an older dodge though ain't it?
-
I know the Dana 60's in those years 2500 were vacuum disconnects but I'm not sure about the 44's.
But I'd say your standard 44/9" combo would be better.
-
Thats a D44 low pinion vac disconnect.
Ryan yours is a Dana 60 from some unknown dodge.
-
eyah its like a '75 -- its the mystry D60KP --- found a guy up in NJ running the same axle though- just hard to find parts for..
-
http://cgi.ebay.com/ebaymotors/Jeep-CJ-Rock-Crawler-1984-Jeep-CJ7-Rock-Crawler-Project-Lifted-MAKE-OFFER-/220840465262?pt=US_Cars_Trucks&hash=item336b1e136e
-
http://macon.craigslist.org/pts/2571581968.html
-
http://macon.craigslist.org/pts/2571581968.html
Wow! You can get a whole D30 for that kind of money.
-
http://macon.craigslist.org/pts/2571581968.html
Wow! You can get a whole D30 for that kind of money.
Hell 30 and 35. LoL
-
http://atlanta.craigslist.org/eat/cto/2572168237.html {ehm} {no} {no}
-
{ehm} {no} WTF ??? >:( :-\ :bs) {boohoo} {nln} :fu( [hammer] :arab {:shoot} {ban} {bruce} {whack3} {poke} {peek} {:CH} 8==D [hammer] %) 8==D
-
http://atlanta.craigslist.org/eat/cto/2572168237.html {ehm} {no} {no}
Thats what I plan to do when the ranger is done.
Btw I got a rubi for you. Just hit 1,000 miles. You can have the payment with it. {hihi}
-
Yeah I just threw it out there and thats why its priced so high. Figured if someone wants to give me 20 grand for all of it I will send it down the road. And on top of that everyone getting these 4 door rubis is kinda got me wanting to build one. {letseat}
-
http://atlanta.craigslist.org/eat/cto/2553355770.html
-
http://atlanta.craigslist.org/atl/cto/2530024705.html {popcorn}
-
Great part out to get cheap axles.
http://atlanta.craigslist.org/nat/cto/2545398632.html
-
Nice cage...
http://atlanta.craigslist.org/atl/rvs/2534071102.html
-
http://atlanta.craigslist.org/atl/cto/2530024705.html {popcorn}
I should call him and see if he wants to do some trading since were close in price. LOL
-
http://atlanta.craigslist.org/atl/cto/2530024705.html {popcorn}
I should call him and see if he wants to do some trading since were close in price. LOL
Yeah you should.. Great steal
-
http://atlanta.craigslist.org/atl/pts/2549347860.html
-
Nice cage...
http://atlanta.craigslist.org/atl/rvs/2534071102.html
Dang, and I thought your Ranger was going to be worth something. :(
-
http://atlanta.craigslist.org/atl/pts/2549347860.html
Nice ummm highsteer... If those knuckles can't be saved, not too sure it'd be worth it.
-
Nice cage...
http://atlanta.craigslist.org/atl/rvs/2534071102.html
Dang, ruined the surprise paint job I got you for your birthday!
-
Bet you'd get great mileage toting a Jeep on this thing. http://macon.craigslist.org/cto/2560710399.html
Might go look at it and see if the deck can be dropped back down easily.
-
Bet you'd get great mileage toting a Jeep on this thing. http://macon.craigslist.org/cto/2560710399.html
Might go look at it and see if the deck can be dropped back down easily.
That should be in a thread - Trailers that make you say WTF
-
Seriously, what is the point in that setup? {ehm}
-
Not Craigslist but still some damn good deals, check out the PSC front bumper:
http://www.rebeloffroad.com/category_s/177.htm (http://www.rebeloffroad.com/category_s/177.htm)
-
Maybe a good deal depending on miles
http://atlanta.craigslist.org/nat/pts/2577309093.html
-
heres someone a 4x4 grocery getter... lol... i dunno what it even is... never seen one...
http://atlanta.craigslist.org/sat/cto/2575648662.html
-
Incase anybody was looking for one.
http://cgi.ebay.com/ebaymotors/1987-8-5-foot-slide-camper-/300597237450?pt=RVs_Campers&hash=item45fcfdd6ca
-
What a deal/ {toast}
-
Incase anybody was looking for one.
http://cgi.ebay.com/ebaymotors/1987-8-5-foot-slide-camper-/300597237450?pt=RVs_Campers&hash=item45fcfdd6ca
RANDY!!
-
That thing better be dyno mated!
From the phone
-
I so wanna go pick that up.
Sent from my iPhone using my right hand.
-
I so wanna go pick that up.
Sent from my iPhone using my right hand.
x2 How is towing with one of those on?
-
http://atlanta.craigslist.org/nat/cto/2592773233.html
-
I so wanna go pick that up.
Sent from my iPhone using my right hand.
x2 How is towing with one of those on?
Almost like it is not even back there.
-
heres someone a 4x4 grocery getter... lol... i dunno what it even is... never seen one...
http://atlanta.craigslist.org/sat/cto/2575648662.html
That's a japanese mini truck/Kei truck. The Suzuki Carrys are actually starting to become fairly popular. I was researching these these for work & ran across a few folks building some fairly cool rigs. One that kept coming to mind is below
http://www.minitrucktalk.com/showthread.php?t=3306
-
http://atlanta.craigslist.org/atl/pts/2600116476.html
Not a bad deal depending on the fronts BOM#
-
I might have to check that out. Could be some spare parts and it's in my neck of the woods.
Sent from my iPhone using my right hand.
-
You should buy it and sell me the 10.5 for $300 around Dec when I have a little extra $$ {popcorn}
-
decent deal, needs some work tho:
http://atlanta.craigslist.org/atl/cto/2606733697.html (http://atlanta.craigslist.org/atl/cto/2606733697.html)
-
another 12v:
http://atlanta.craigslist.org/sat/cto/2576447625.html (http://atlanta.craigslist.org/sat/cto/2576447625.html)
-
I dont know much about diesel trucks but this looks like a good deal:
http://atlanta.craigslist.org/nat/cto/2612924699.html
-
I dont know much about diesel trucks but this looks like a good deal:
http://atlanta.craigslist.org/nat/cto/2612924699.html
I would have to say scam.
Sent from my iPhone using my right hand.
-
I dont know much about diesel trucks but this looks like a good deal:
http://atlanta.craigslist.org/nat/cto/2612924699.html
I would have to say scam.
Sent from my iPhone using my right hand.
most likely...or someone just doesnt know what they have and thinks a 16y/o truck with a $h!tty auto trans isnt worth much. worth an email to find out. {toast}
-
I was thinking about it but my truck will work just fine and id rather spend the money on a trailer or parts. But someone out there might be looking for a good truck and if it is real they would be getting a good deal!
-
this came up for sale down the street from me... In Barnesville off 1941... its on blazer 6 lug axles and drivetrain... 350 with it looks like a high rise and big carb... with some other chrome stuff... has air lockers front and rear... leafs front and rear... on 39's that have good tread... just figured if someone was interested to look... hes asking 6500 which i think is high for not having larger axles (has 10 bolt front and 12 bolt rear looks like... or 44 front whatever...)
also the steering and alot of the fab work is sketchy... it has a trac bar on the rear? uh... its leaf sprung... transfercase drop that looks weak... SYE if i remember right... but its big and is a good start... just wouldnt pay what hes asking... maybe one of yall know him i dunno... probly on here and is gonna give me hell for pointing out things i didnt like... lol
[attachment deleted by admin]
-
89 XJ. Apparently great on gas, but the owner admittedly can't drive the thing...
http://atlanta.craigslist.org/eat/cto/2624395301.html (http://atlanta.craigslist.org/eat/cto/2624395301.html)
-
89 XJ. Apparently great on gas, but the owner admittedly can't drive the thing...
http://atlanta.craigslist.org/eat/cto/2624395301.html (http://atlanta.craigslist.org/eat/cto/2624395301.html)
Hmm... 4door 5 spds aren't too common.
-
http://atlanta.craigslist.org/atl/pts/2632755641.html (http://atlanta.craigslist.org/atl/pts/2632755641.html)
good deal on some 38s {toast}
-
89 XJ. Apparently great on gas, but the owner admittedly can't drive the thing...
http://atlanta.craigslist.org/eat/cto/2624395301.html (http://atlanta.craigslist.org/eat/cto/2624395301.html)
Hmm... 4door 5 spds aren't too common.
Thats what my brothers was and it was a blast to drive. That thing would spin like crazy.
-
http://atlanta.craigslist.org/atl/pts/2632755641.html (http://atlanta.craigslist.org/atl/pts/2632755641.html)
good deal on some 38s {toast}
I pretty sure those are Richards old 16" wheels, sure looks like them in the picture. That is a killer deal on the tires, not so impressed with the wheel deal.
-
mine were 16.5
-
mine were 16.5
Oh well I was wrong.
-
Thought I would pass this along, I'm not affiliated with this guy at all. I bought a never installed Currie Enterprises rear Rock Crawler Bumper/Tire Carrier combo for $300 from him about a month ago. It had all the hardware and instructions in it's original packaging. He used to own an offroad shop in Snellville 10 or so years ago but has been out of the business for a long time. He has a bunch of left over stock at his house that he is just starting to go through. I personally saw the corners and the bumper/tire carrier in the ads below when I was there and they both look great. I'm pretty sure he has three sets of TJ corners with one each primed, bare, and aluminum. Anyway, he's a super nice guy and will talk Jeeps with you as long as you let him.
http://atlanta.craigslist.org/eat/pts/2600550840.html YJ/TJ bumper/tire carrier
http://atlanta.craigslist.org/eat/pts/2600411098.html TJ Poison Spyder corners
-
http://atlanta.craigslist.org/eat/pts/2630396226.html
-
Car hauler $1200
http://atlanta.craigslist.org/sat/cto/2679542635.html
-
http://atlanta.craigslist.org/sat/rvs/2698278848.html
Probly good parts and tires here for cheap...
-
http://www.gon.com/marketplace/listings/33712/built_jeep_yj_axles
-
{hihi}
http://cgi.ebay.com/ebaymotors/Niki-Laudas-1974-Ferrari-312-B3-/300633805196?pt=Race_Cars_Not_Street_Legal_&hash=item45ff2bd18c#v4-47
-
http://atlanta.craigslist.org/nat/pts/2689019631.html (http://atlanta.craigslist.org/nat/pts/2689019631.html)
-
http://atlanta.craigslist.org/nat/pts/2756391054.html
-
You want how much? LMAO
http://cgi.ebay.com/ebaymotors/2006-Rubicon-Unlimited-Rock-Crawler-/300646995974?pt=US_Cars_Trucks&hash=item45fff51806
-
wow... no way...
-
DDDOOOOUUUUGGGG!!!!
http://atlanta.craigslist.org/eat/cto/2804903073.html
-
1989 Jeep Comanche 4X4 - $4000
http://atlanta.craigslist.org/sat/cto/2820197506.html
-
WTF
where was that when i was looking!
-
DDDOOOOUUUUGGGG!!!!
http://atlanta.craigslist.org/eat/cto/2804903073.html
2wd
-
new to me </LMAO/>
http://athensga.craigslist.org/pts/2767271139.html
-
That's pretty strong!! A Dana 35 front end!!
-
$29.95 each, 7 available
15X8 5-4.5 JEEP BLACK DAYTONA STYLE STEEL WHEEL OFF-ROAD USE ONLY OR15X8 - NEW
http://www.ebay.com/itm/15X8-5-4-5-JEEP-BLACK-DAYTONA-STYLE-STEEL-WHEEL-OFF-ROAD-USE-ONLY-OR15X8-NEW-/350491643004?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item519aee0c7c#ht_511wt_905
-
there is a set of like new soft 8's in a local JY... has some worn out 32's on them but hes only asking $100 for all 4 if anyones interested PM me so i get a email and will check this faster... they have weird hours and i dont know the name of it... lol... i can get that info easily though if wanted... also i think there 15's if i remember right...
-
Slide in camper, 300 Bucks
http://atlanta.craigslist.org/eat/rvs/2856699199.html
-
http://www.southernjeeps.org/phpbb/viewtopic.php?t=38147&highlight=&sid=ac54e7dfad114cb568d276fbcfe0e685
-
http://atlanta.craigslist.org/eat/pts/2851069234.html
-
{letseat} wish i could swing that!
-
Not CL, but a hell of a deal.
http://www.pirate4x4.com/forum/showthread.php?t=1032067
TAPATALK
-
Not CL, but a hell of a deal.
http://www.pirate4x4.com/forum/showthread.php?t=1032067
TAPATALK
Yeah, lower it, and it's done.
(http://www.rickybphotography.com/Rig-Features/Jeep-TJ-FOR-SALE/i-MH3qvw5/1/M/DSC0546-M.jpg)
-
Would anyone like to buy an LJ?
-
i would swap for that beast!
-
Not CL, but a hell of a deal.
http://www.pirate4x4.com/forum/showthread.php?t=1032067
TAPATALK
Yeah, lower it, and it's done.
(http://www.rickybphotography.com/Rig-Features/Jeep-TJ-FOR-SALE/i-MH3qvw5/1/M/DSC0546-M.jpg)
Sits to high for you?
-
</LMAO/>
http://atlanta.craigslist.org/wat/cto/2852017074.html
-
WTF
-
Last night there was a Hennessey Hammock listed under sporting goods for $125. Brand new
-
Saw listing for 2 of these for $140...
off grid post
-
http://atlanta.craigslist.org/eat/pts/3122318412.html
Hell'uv a deal for Metal Cloak!!!!
-
That is awesome!
umm... not a good deal but this is funny!
http://www.thepreownedjeepstore.com/detail-1984-jeep-cherokee-sport-used-8695960.html
-
http://atlanta.craigslist.org/eat/pts/3122318412.html
Hell'uv a deal for Metal Cloak!!!!
Awesome! 35's with no lift - love it!
-
SAMMY'S AWESOME JEEP!
http://chattanooga.craigslist.org/cto/3129628807.html
-
WTF
-
This would be cool to have
http://www.daveysjeeps.com/repairables/R023771.html
-
I'll take those axles...
-
Craigslist: 2001 F350 truck http://atlanta.craigslist.org/nat/cto/3150022027.html
-
I love duct tape but is a cheap seat cover that hard to come by ;D nice truck though
-
</LMAO/> NICE redneck repair job... I think it adds another $1000 to it {hihi}
-
Good deal there.
It's funny how all the HD trucks have Gooseneck hitches, but they never towed anything heavy ::)
-
Good deal there.
It's funny how all the HD trucks have Gooseneck hitches, but they never towed anything heavy ::)
Haha, same as the jeeps with aftermarket lockers and 37s that haven't been offroad.
-
http://atlanta.craigslist.org/atl/grd/3151276194.html
-
Good deal there.
It's funny how all the HD trucks have Gooseneck hitches, but they never towed anything heavy ::)
Haha, same as the jeeps with aftermarket lockers and 37s that haven't been offroad.
</LMAO/>
-
That trailer has mobile home axles... pass.
-
That trailer has mobile home axles... pass.
Those could be camper axles, you would need to see them in person to know. Some early campers are very similar, but were serviceable, (brake backing plates were bolted on). If they are on the original frame, I would look for evidence of battery box or slide out steps.
-
????
http://atlanta.craigslist.org/nat/pts/3055169358.html
-
crap!
-
????
http://atlanta.craigslist.org/nat/pts/3055169358.html
WOW - good deal!!
-
crap!
WHAT????
-
Crap... I can't buy it.
-
Here's a nice 4 door for someone, seems reasonable:
http://www.cars.com/go/search/detail.jsp?tab=summary&recnum=&actLog=&listingId=89882709&paId=454375946&listingRecNum=0&criteria=sf1Dir%3dDESC%26mkId%3d20021%26stkTyp%3dU%26mdId%3d22306%26rd%3d100000%26crSrtFlds%3dstkTypId-feedSegId-mkId-mdId%26zc%3d30152%26rn%3d0%26PMmt%3d1-1-0%26stkTypId%3d28881%26sf2Dir%3dASC%26sf1Nm%3dprice%26sf2Nm%3dmiles%26isDealerGrouping%3dfalse%26rpp%3d50%26feedSegId%3d28705&tracktype=usedcc&pageNumber=&numResultsPerPage=50&largeNumResultsPerPage=0&sortorder=descending&sortfield=PRICE&certifiedOnly=false&&aff=national (http://www.cars.com/go/search/detail.jsp?tab=summary&recnum=&actLog=&listingId=89882709&paId=454375946&listingRecNum=0&criteria=sf1Dir%3dDESC%26mkId%3d20021%26stkTyp%3dU%26mdId%3d22306%26rd%3d100000%26crSrtFlds%3dstkTypId-feedSegId-mkId-mdId%26zc%3d30152%26rn%3d0%26PMmt%3d1-1-0%26stkTypId%3d28881%26sf2Dir%3dASC%26sf1Nm%3dprice%26sf2Nm%3dmiles%26isDealerGrouping%3dfalse%26rpp%3d50%26feedSegId%3d28705&tracktype=usedcc&pageNumber=&numResultsPerPage=50&largeNumResultsPerPage=0&sortorder=descending&sortfield=PRICE&certifiedOnly=false&&aff=national)
-
Here's a nice 4 door for someone, seems reasonable:
won't fit in the garage
-
Wouldnt give 25 for it. Useless and ssnap axles frequently.
-
(http://www.cstatic-images.com/supersized/DMI/205054/117157.05.jpg)
What the hell is going on with that steering </LMAO/>
-
I don't know much but I'm with ya Danny that steering looks jacked up bad </LMAO/>
-
Hey now it says he is a master Jeep builder!
(OlllllllO)
-
Dang, I missed it. Looks like it was taken down.
-
Still workss
-
Still workss
Maybe its an iphone fail?
-
(http://www.cstatic-images.com/supersized/DMI/205054/117157.05.jpg)
What the hell is going on with that steering </LMAO/>
I know, I looked at that picture for a long time trying to figure it out and it game me a headache.
-
That is that dumb krakken jeep. Talk about fail... this is an epic one! $80,000 for this piece of yard art... WTF
-
Not a good deal, but worth a laugh. "The best of everything,no corners cut" </LMAO/> I guess using leaf springs in the rear to stretch is better than a 4 link and coil overs. And cutting the stock fenders is better than tube fenders.
http://atlanta.craigslist.org/atl/cto/3229782061.html
-
I like the steps welded to the rocker rails.
-
I like the steps welded to the rocker rails.
::)
-
http://denver.craigslist.org/cto/3239785211.html
-
sickest jk ever built right there. Saw vids from EJS with it, just awesome!
-
I agree and would love to have that for the GATRFEST weekend
-
CoLo on JKO. Wheeled on the JKO and Rock Krawler rides this year in Moab. He walked everything, including some that no JKU could get up. He has great work arounds for all the JK computer/electronics stuff too.
(http://i245.photobucket.com/albums/gg46/reynoldsdb/Jeep%20Stuff/Moab%202012/Moab%202012%2004%2003%20Metal%20Masher%20Rock%20Krawler/DSC02204.jpg)
(http://i245.photobucket.com/albums/gg46/reynoldsdb/Jeep%20Stuff/Moab%202012/Moab%202012%2004%2004%20Golden%20Spike%20JKO/DSC02574.jpg)
-
http://atlanta.craigslist.org/nat/cto/3268147487.html (http://atlanta.craigslist.org/nat/cto/3268147487.html)
-
http://atlanta.craigslist.org/nat/cto/3268147487.html (http://atlanta.craigslist.org/nat/cto/3268147487.html)
W/O DRIVETRAIN </LMAO/>
-
:hlp idiot! So I guess it being on TV makes it worth $15,000 more than it's worth? WTF
-
Apparently the whole thing was built for under six grand on Trucks.
-
Break you off a piece of this.
"only want 4,500 for the hold thang"
http://dothan.craigslist.org/pts/3268034643.html
-
</LMAO/>
WTF
-
Break you off a piece of this.
"only want 4,500 for the hold thang"
http://dothan.craigslist.org/pts/3268034643.html
Screw jeepfest, I'm heading to Doathan to get that thang!
-
Break you off a piece of this.
"only want 4,500 for the hold thang"
http://dothan.craigslist.org/pts/3268034643.html
Screw jeepfest, I'm heading to Doathan to he that thang!
Dont waste your time playa. I already put a down payment on it dog.
-
DAAAAMMNNN DOG YOU GOT THAT KIT KAT RIDE!!! And its on 4's 8)
TAPATALK II
-
Did anyone see the 1986 CJ7 with Chevy 350 lifted on 35's with turbo 400 trany and lots of other addons this week on Craigslist for $3750.00
I tryed to get to it before it sold but it went in 1 day! I called the guy and he didn't have any idea of what he had.Who ever got it got a good deal! I know I could have sold it for $5500.00 with out doing anything to it!
-
^^ hate when that happens.
-
Ya Cheryl really wanted it too! Just couldn't get the time off to get there. He pulled the pic off line allready or I would have posted it. That was a great deal!
-
Look at these amazing deals!!!!!!! </LMAO/> </LMAO/> </LMAO/>
http://louisville.craigslist.org/cto/3318650241.html
http://meadville.craigslist.org/clo/3331729953.html
-
nice finds. Mopare... never heard of 'em </LMAO/>
-
Look at these amazing deals!!!!!!! </LMAO/> </LMAO/> </LMAO/>
http://louisville.craigslist.org/cto/3318650241.html
http://meadville.craigslist.org/clo/3331729953.html
I guess they don't have spell check in Fort Knox </LMAO/>
This truck was the showcase truck by mopare to sea what they can do.
wich ternd out to be absalutly amazing.
we are negocibile on the price but please be resnabile truck hase less then 19,000 miles
Searious byers/collecters only call 8082143008. i can send pic by email or text.
-
</LMAO/>
-
Danny, can yoo help me install a terbo on my jeap?
-
Danny, can yoo help me install a terbo on my jeap?
Is it a Mopare terbo? I hear they are absalutly the best!!
-
http://meadville.craigslist.org/clo/3331729953.html
Just exactly what were you searching for to come upon this one?
-
http://meadville.craigslist.org/clo/3331729953.html
Just exactly what were you searching for to come upon this one?
I was wondering the same!
-
Best of Craigslist is always fun!
http://www.craigslist.org/about/best/all/ (http://www.craigslist.org/about/best/all/)
-
http://meadville.craigslist.org/clo/3331729953.html
Just exactly what were you searching for to come upon this one?
uhhh mmm cough cough uhhhhhhhhhhhhh
-
http://meadville.craigslist.org/clo/3331729953.html
Just exactly what were you searching for to come upon this one?
uhhh mmm cough cough uhhhhhhhhhhhhh
</LMAO/> </LMAO/> </LMAO/>
-
http://atlanta.craigslist.org/nat/pts/3308503463.html (http://atlanta.craigslist.org/nat/pts/3308503463.html)
Black and grey seat covers for jku
-
http://atlanta.craigslist.org/nat/pts/3308503463.html (http://atlanta.craigslist.org/nat/pts/3308503463.html)
Black and grey seat covers for jku
That's a good deal. I have those exact covers and really like them, they were $400+ new.
-
http://atlanta.craigslist.org/nat/pts/3308503463.html (http://atlanta.craigslist.org/nat/pts/3308503463.html)
Black and grey seat covers for jku
That's a good deal. I have those exact covers and really like them, they were $400+ new.
I know, yours are sweet. I'd get em if they were all black.
-
BEST EVER CRAIGSLIST ADD!
http://atlanta.craigslist.org/nat/for/3346397424.html (http://atlanta.craigslist.org/nat/for/3346397424.html)
-
BEST EVER CRAIGSLIST ADD!
http://atlanta.craigslist.org/nat/for/3346397424.html (http://atlanta.craigslist.org/nat/for/3346397424.html)
</LMAO/>
-
Real good deal. This is Scottie Bobbie selling these
http://atlanta.craigslist.org/atl/pts/3471821568.html
-
http://cgi.ebay.com/ebaymotors/4WD-4dr-Unli-/221162687587?_trksid=p3984.m1438.l2649&ssPageName=STRK:MEWAX:IT&forcev4exp=true
-
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=251198837828 (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=251198837828)
-
Seems like a pretty good deal for a tow pig...http://atlanta.craigslist.org/atl/ctd/3478284497.html (http://atlanta.craigslist.org/atl/ctd/3478284497.html)
-
Seems like a pretty good deal for a tow pig...http://atlanta.craigslist.org/atl/ctd/3478284497.html (http://atlanta.craigslist.org/atl/ctd/3478284497.html)
6.0's prior to 05 had issues. I avoid.
Prefer 06 or the newer 6.7 or older 7.3.
Sent from my Samsung Note 2
-
Not to shabby if it all works. I question some of the options like rear defroster but has a sliding rear window. Would be worth the look for someone. It is the 6.0 so some money would need to be spent to get it great. I would want to find out if it has any engine mods but you don't know how the previous owner treated it and those are something I would want to know with the 6.0
Sent from my iPhone using Tapatalk
-
I can't get one now, just throwing it out there for anyone looking. I'd prefer the older 7.3 when the time comes.
-
Seems like a pretty good deal for a tow pig...http://atlanta.craigslist.org/atl/ctd/3478284497.html (http://atlanta.craigslist.org/atl/ctd/3478284497.html)
6.0's prior to 05 had issues. I avoid.
Prefer 06 or the newer 6.7 or older 7.3.
Sent from my Samsung Note 2
The 6.0 ran from 03.5 through 07 and all of them are problematic. The 08 through 10 is the 6.4. The 11 and on is the 6.7. I have an 08 with the 6.4 and those motors are great. I have mine on a tuner with a max of 650 hp and 1200tq or so. I don't always leave it there but the 6.4 is a hell of a motor, retarded power. From my understanding the newer 6.7 don't have the power of the 6.4's. The 6.7 is a Ford motor and the 6.4 is the last year of international making motors for ford.
-
I can't get one now, just throwing it out there for anyone looking. I'd prefer the older 7.3 when the time comes.
Deals can be had if your willing to work! I have searched over a year and even with all the bs I am dealing with on my truck now I got it for thousands under what it could have been. Because I am willing to work I will still save a few thousand when I am done buying things
Sent from my iPhone using Tapatalk
-
I can't get one now, just throwing it out there for anyone looking. I'd prefer the older 7.3 when the time comes.
Deals can be had if your willing to work! I have searched over a year and even with all the bs I am dealing with on my truck now I got it for thousands under what it could have been. Because I am willing to work I will still save a few thousand when I am done buying things
Sent from my iPhone using Tapatalk
That's how I like to do things. Much rather find deals and take my time. I have no room for one even if I found a great deal unfortunately.
-
I can't get one now, just throwing it out there for anyone looking. I'd prefer the older 7.3 when the time comes.
Deals can be had if your willing to work! I have searched over a year and even with all the bs I am dealing with on my truck now I got it for thousands under what it could have been. Because I am willing to work I will still save a few thousand when I am done buying things
Sent from my iPhone using Tapatalk
That's how I like to do things. Much rather find deals and take my time. I have no room for one even if I found a great deal unfortunately.
Jay, we're buds, you can keep it at my house :)
-
I can't get one now, just throwing it out there for anyone looking. I'd prefer the older 7.3 when the time comes.
Deals can be had if your willing to work! I have searched over a year and even with all the bs I am dealing with on my truck now I got it for thousands under what it could have been. Because I am willing to work I will still save a few thousand when I am done buying things
Sent from my iPhone using Tapatalk
That's how I like to do things. Much rather find deals and take my time. I have no room for one even if I found a great deal unfortunately.
Jay, we're buds, you can keep it at my house :)
Thought you were gonna say that I could just borrow yours anytime :)
-
12v PORTABLE COMPRESSOR REGULARLY $45, ON SALE FOR $20
I know it's not the best or highest volume, but it's not the worst either, and might get you out of a bind.
http://www.pepboys.com/product/details/9327241/1445/
MasterFlow Tsunami MF-1050
(http://static.pepboys.com/images/productImages/61002100/MF-1040.jpg)
-
12v PORTABLE COMPRESSOR REGULARLY $45, ON SALE FOR $20
I know it's not the best or highest volume, but it's not the worst either, and might get you out of a bind.
http://www.pepboys.com/product/details/9327241/1445/
MasterFlow Tsunami MF-1050
(http://static.pepboys.com/images/productImages/61002100/MF-1040.jpg)
I have one of these and I think it works pretty well. I usually keep mine in the Jeep with my tools and tow straps.
-
http://atlanta.craigslist.org/eat/cto/3473976826.html
-
http://atlanta.craigslist.org/eat/cto/3473976826.html
That rig has been on there for awhile. Not sure if that means anything or not. But if i was in the market I would probably check it out.
Sent from my DROID RAZR using Tapatalk 2
-
That thing had a ton of good parts on it.
-
It's located next to my grandmother in laws house. Don't know the guy but when we have been to her house I seen it in the drive way several times. Something worth looking at.
-
I just posted these things on CL. Not sure if anybody here is interested.
New - BFG Mud Terrain 32"
http://atlanta.craigslist.org/nat/pts/3522987767.html
"JEEP" Spare Tire Cover 32"
http://atlanta.craigslist.org/nat/pts/3523016017.html
Truck Sub Boxes
http://atlanta.craigslist.org/nat/pts/3522970923.html
-
$7k TJ. I'd buy it
http://atlanta.craigslist.org/atl/cto/3400885085.html
-
And another deal to be had! 2dr and 4dr rails
Jeep Wrangler Rubicon Side Rails $75
http://atlanta.craigslist.org/nat/pts/3518823884.html
-
Not to bad. Needs about 4" less lift and make sure they did a super 35 kit on the rear with that Detroit. I assume it would be a 35 with the yr, 4cyl and mention of drum brakes
Sent from my iPhone using Tapatalk
-
Gots to have!!!!!!!
http://www.hardlinecrawlers.com/forums/index.php?topic=22049.0
Sent from my SCH-I905 using Tapatalk 2
-
For u survivorist
http://www.woot.com/plus/sigg-water-bottles
Sent from my SCH-I905 using Tapatalk 2
-
Gots to have!!!!!!!
http://www.hardlinecrawlers.com/forums/index.php?topic=22049.0
Sent from my SCH-I905 using Tapatalk 2
</LMAO/>
I wish there were pictures for me to laugh over it. Typical Floridian build with 60" of lift im sure.
Everything on this jeep is quality made or name brand it has only been out 3 time once to louisiana mud fest and the other 2 times to local mud hole
Im located in central florida
-
Built for mudbogging. {popcorn}
-
Not CL but a damn good deal.
JK Rubicon D44 front chromo axle shafts
http://jkfreaks.com/forums/showthread.php?t=8110 (http://jkfreaks.com/forums/showthread.php?t=8110)
-
Synergy jk ball joints
Now $200
http://www.northridge4x4.com/shop/synergy-suspension-jeep-jk-heavy-duty-front-ball-joint-set-ppm-8009-12
Sent from my SCH-I905 using Tapatalk 2
-
http://cgi.ebay.com/ebaymotors/77-Jeep-J-20-Original-360-ci-V8-Original-3-Speed-Auto-3940-Documented-Miles-/261150606418?pt=US_Cars_Trucks&hash=item3ccdca0452
-
http://cgi.ebay.com/ebaymotors/77-Jeep-J-20-Original-360-ci-V8-Original-3-Speed-Auto-3940-Documented-Miles-/261150606418?pt=US_Cars_Trucks&hash=item3ccdca0452
that J20 is soooo cool! The price is insane but the truck is awesome.
-
http://atlanta.craigslist.org/eat/cto/3521509858.html {salute}
-
http://york.craigslist.org/cto/3546339807.html (http://york.craigslist.org/cto/3546339807.html)
-
http://york.craigslist.org/cto/3546339807.html (http://york.craigslist.org/cto/3546339807.html)
//HOODRICH//
-
http://york.craigslist.org/cto/3546339807.html (http://york.craigslist.org/cto/3546339807.html)
//HOODRICH//
Adam here is another new jeep for you buddy.
Sent from my DROID RAZR using Tapatalk 2
-
{bling}
-
TJ Safari top
I bought a Viking top for my TJ and no longer need my Bestop Sailcloth Safari Top. Still in great shape and seen VERY little rain. I had an upholstry shop install some snaps along the rear edge to attach to a cross bar that was tack welded to my cage. Its so new I didn't even fully weld it in. I cut the tacks and including this bent and notched peice of 1.75" DOM. This can be welded to the stock TJ bar and the top snaps to it creating a really tight fit. Also included is a new in the box no drill header.
I am asking $100 for all of this.
The tube and snaps work cost that much alone.
_________________
Jeff Dodgen
http://www.southernjeeps.org/phpbb/viewtopic.php?t=39202&highlight=&sid=cdcc9e13ea79049404705bdfa4ab9153
-
Not CL, but lots of JK stuff for sale
http://www.jkowners.com/forum/showthread.php?t=87678 (http://www.jkowners.com/forum/showthread.php?t=87678)
-
Some of you TJ guys may be interested
http://atlanta.craigslist.org/eat/pts/3531914296.html
-
Some of you TJ guys may be interested
http://atlanta.craigslist.org/eat/pts/3531914296.html
Wish it was for a 04
Sent from my DROID RAZR using Tapatalk 2
-
Some of you TJ guys may be interested
http://atlanta.craigslist.org/eat/pts/3531914296.html
Wish it was for a 04
Sent from my DROID RAZR using Tapatalk 2
It should fit an 04...not sure why it wouldn't.
from the Undercover Fab site:
These UCF Transfer Case Skids are 1" deep. They require the installation of a 1" body lift for '97-'02 models. '03-'06 models require 2" of body lift or 1" body lift with tub clearancing.
They will also require you to install a SYE and CV Shaft if used in conjunction with any suspension lift. Adjustable rear upper control arms are also recommended.
-
Some of you TJ guys may be interested
http://atlanta.craigslist.org/eat/pts/3531914296.html
Wish it was for a 04
Sent from my DROID RAZR using Tapatalk 2
It should fit an 04...not sure why it wouldn't.
from the Undercover Fab site:
These UCF Transfer Case Skids are 1" deep. They require the installation of a 1" body lift for '97-'02 models. '03-'06 models require 2" of body lift or 1" body lift with tub clearancing.
They will also require you to install a SYE and CV Shaft if used in conjunction with any suspension lift. Adjustable rear upper control arms are also recommended.
They had different transmissions over those years so the bolt pattern may be a little different.
-
Well I have everything covered except the sye and CV. I may have to do some research on this
Sent from my DROID RAZR using Tapatalk 2
-
Well I have everything covered except the sye and CV. I may have to do some research on this
Sent from my DROID RAZR using Tapatalk 2
Yeah, that's the biggie with a TJ tummy tuck...but so worth it to get ride of that shovel of a skid plate. The clearance you gain is like going up 3" in tire size...at least at your belly, no change on the diffs.
-
Well I have everything covered except the sye and CV. I may have to do some research on this
Sent from my DROID RAZR using Tapatalk 2
You will need those items as well as adjustable uppers. This skid moves everything up quite a bit
-
I want to do this in the near future. Just wondering if there was anyway to do it without having a body lift. lifted motor mounts and alittle floor massaging?
(OlllllllO)
-
I want to do this in the near future. Just wondering if there was anyway to do it without having a body lift. lifted motor mounts and alittle floor massaging?
(OlllllllO)
Remembering back to my TJ days, I think a 1" BL is a must. However, anything can be accomplished with enough cutting!
A 1" BL is not bad at all.
-
Do a 1.25 body lift. It is around $100 for a very complete body lift kit.
It will open the door for about a 10 other mods that need a body lift too.
-
I want to do this in the near future. Just wondering if there was anyway to do it without having a body lift. lifted motor mounts and alittle floor massaging?
(OlllllllO)
(http://img842.imageshack.us/img842/7168/e2cea34d5e5ca90175dbbd6.jpg)
Daystar's Body Lift Kits are more than just spacer blocks placed on top of factory mounts! Instead, these are complete replacement body mounts with an additional 1" of height, which raises the body 1". Daystar's body lift kits use a special blend of Polyurethane that is resistant to vehicle fluids and road grime while keeping the body isolated from chassis noise and vibration. These mounts keep the body properly aligned with the frame and include all the necessary hardware for installation.
-
Cool! Thanks guys!
(OlllllllO)
-
Use code "weekend20" this weekend for 20% off at Ballistic Fab
http://www.ballisticfabrication.com/ (http://www.ballisticfabrication.com/)
-
Tummy tuck needs a 1" BL minimum. Take a look at how close my stuff is when you see me sat.
-
will do! Thanks Ben.
(OlllllllO)
-
This looks like it could be a lot of fun: http://atlanta.craigslist.org/atl/rvs/3504390705.html (http://atlanta.craigslist.org/atl/rvs/3504390705.html)
-
This looks like it could be a lot of fun: http://atlanta.craigslist.org/atl/rvs/3504390705.html (http://atlanta.craigslist.org/atl/rvs/3504390705.html)
Pretty sure I saw that thing at Mountainside last January. Beast.
-
Pretty good deal on some Pitbull 37's
http://www.jkowners.com/forum/showthread.php?t=88221 (http://www.jkowners.com/forum/showthread.php?t=88221)
-
either going with the pitbulls or back to my beloved trxus after my BFGs go out. 37" too {letseat}
-
either going with the pitbulls or back to my beloved trxus after my BFGs go out. 37" too {letseat}
and a stretch?
The pitbulls are sweet, I have followed Mike Livingston and his Pitbull Rockers and they WORK!
(http://i68.photobucket.com/albums/i32/TChaap/Pitbull_Rocker_Radial_Tire_35x12_5_R18_zps8a37dd75.jpg)
-
DMB has them also .....tread has lasted a long time also
-
Mikes have been awful on the road! His maybe got 25,000 and they are nearly bald. I still miss my Trxus MTs though. Soft, tacky and good wear. Now if I had the $ and a trailer and a tow rig... I would find a set of these http://www.fourwheeler.com/techarticles/wheels/129_0508_interco_trxus_mt_special_tire_test/photo_01.html
-
Mikes have been awful on the road! His maybe got 25,000 and they are nearly bald. I still miss my Trxus MTs though. Soft, tacky and good wear. Now if I had the $ and a trailer and a tow rig... I would find a set of these http://www.fourwheeler.com/techarticles/wheels/129_0508_interco_trxus_mt_special_tire_test/photo_01.html
I still have to push the MTRs. Mine have 15-16000 on them, look great still and off road have a lot of grip. A bit of $$ but if they last its worth it.
-
I have enjoyed my BFGs alot. Never given me any problems. But those Trxus I had were definitely more sticky than the BFGs.
-
Mikes have been awful on the road! His maybe got 25,000 and they are nearly bald. I still miss my Trxus MTs though. Soft, tacky and good wear. Now if I had the $ and a trailer and a tow rig... I would find a set of these http://www.fourwheeler.com/techarticles/wheels/129_0508_interco_trxus_mt_special_tire_test/photo_01.html
I still have to push the MTRs. Mine have 15-16000 on them, look great still and off road have a lot of grip. A bit of $$ but if they last its worth it.
X2 on the MTR's...I don't put a lot of road miles on them but they do ride pretty darn good on the road for a big lugged tire. And they are sweet on the rocks!
-
Toyota SAS rock crawler
http://atlanta.craigslist.org/atl/cto/3570889126.html (http://atlanta.craigslist.org/atl/cto/3570889126.html)
-
I've actually went on a ride with this guy once that's selling the yota. That thing really impressed me. Looks like a reasonable price after seeing what it could do
-
http://atlanta.craigslist.org/wat/cto/3627612588.html (http://atlanta.craigslist.org/wat/cto/3627612588.html)
-
Not a smoking deal but a decent deal on a quality synthetic line:
http://www.pirate4x4.com/forum/misc-stuff-sale/1170818-niw-masterpull-synthetic-winch-line.html (http://www.pirate4x4.com/forum/misc-stuff-sale/1170818-niw-masterpull-synthetic-winch-line.html)
-
Not a smoking deal but a decent deal on a quality synthetic line:
http://www.pirate4x4.com/forum/misc-stuff-sale/1170818-niw-masterpull-synthetic-winch-line.html (http://www.pirate4x4.com/forum/misc-stuff-sale/1170818-niw-masterpull-synthetic-winch-line.html)
75 foot 3/8" masterpull $350 shipped to your door
*******************************************
Isn't this a better deal?
http://www.amazon.com/gp/product/B0085M3YVW/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
Amsteel Blue Green 3/8" x 85' Winch Line w/ Black Safety Thimble/Winch Stop
Price: $240.00
-
^^^
Now that is a smoking deal!
-
^^^
Now that is a smoking deal!
Mine arrived last week.
I have a list to do that is getting out of hand.
-
You and me both :'(
Lifted F150 >> http://atlanta.craigslist.org/nat/pts/3647800473.html (http://atlanta.craigslist.org/nat/pts/3647800473.html)
-
Not a smoking deal but a decent deal on a quality synthetic line:
http://www.pirate4x4.com/forum/misc-stuff-sale/1170818-niw-masterpull-synthetic-winch-line.html (http://www.pirate4x4.com/forum/misc-stuff-sale/1170818-niw-masterpull-synthetic-winch-line.html)
75 foot 3/8" masterpull $350 shipped to your door
*******************************************
Isn't this a better deal?
http://www.amazon.com/gp/product/B0085M3YVW/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
Amsteel Blue Green 3/8" x 85' Winch Line w/ Black Safety Thimble/Winch Stop
Price: $240.00
There are different ways the lines are made that dictates the cost. I'm not talking about thickness but the material that makes up the line.
-
Not a smoking deal but a decent deal on a quality synthetic line:
http://www.pirate4x4.com/forum/misc-stuff-sale/1170818-niw-masterpull-synthetic-winch-line.html (http://www.pirate4x4.com/forum/misc-stuff-sale/1170818-niw-masterpull-synthetic-winch-line.html)
75 foot 3/8" masterpull $350 shipped to your door
*******************************************
Isn't this a better deal?
http://www.amazon.com/gp/product/B0085M3YVW/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
Amsteel Blue Green 3/8" x 85' Winch Line w/ Black Safety Thimble/Winch Stop
Price: $240.00
There are different ways the lines are made that dictates the cost. I'm not talking about thickness but the material that makes up the line.
Amsteel is a quality line
-
Not a smoking deal but a decent deal on a quality synthetic line:
http://www.pirate4x4.com/forum/misc-stuff-sale/1170818-niw-masterpull-synthetic-winch-line.html (http://www.pirate4x4.com/forum/misc-stuff-sale/1170818-niw-masterpull-synthetic-winch-line.html)
75 foot 3/8" masterpull $350 shipped to your door
*******************************************
Isn't this a better deal?
http://www.amazon.com/gp/product/B0085M3YVW/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
Amsteel Blue Green 3/8" x 85' Winch Line w/ Black Safety Thimble/Winch Stop
Price: $240.00
There are different ways the lines are made that dictates the cost. I'm not talking about thickness but the material that makes up the line.
Amsteel is a quality line
Yes, it is but here is an explanation of synthetic line: http://www.masterpull.com/synthetic-winch-line-comparison/. Not all is the same. Some Amsteel is woven different from others which makes a difference.
-
Was a nice deal.
Look at the photos and all the mods. Some are really cool and well done.
http://www.jkowners.com/forum/showthread.php?t=89138
Sent off camber
-
I need this
http://www.hardlinecrawlers.com/forums/index.php?topic=23431.0
Sent off camber
-
Not a terrible deal....Complete front & rear rubi 44 setup $2,600. If you already had a 44 under your rig & turned around & sold that, it wouldn't be bad out of pocket.
http://atlanta.craigslist.org/nat/pts/3664714913.html
-
http://atlanta.craigslist.org/sat/cto/3661584491.html (http://atlanta.craigslist.org/sat/cto/3661584491.html)
-
Not a terrible deal....Complete front & rear rubi 44 setup $2,600. If you already had a 44 under your rig & turned around & sold that, it wouldn't be bad out of pocket.
http://atlanta.craigslist.org/nat/pts/3664714913.html
I know the guy and he is a stand person. Not bad for good gearong with lockers. Two arb lockers with compressors will set you back at least 2000 without install not mentioning the regear cost and parts.
Sent from my SCH-I535 using Tapatalk 2
-
Not a terrible deal....Complete front & rear rubi 44 setup $2,600. If you already had a 44 under your rig & turned around & sold that, it wouldn't be bad out of pocket.
http://atlanta.craigslist.org/nat/pts/3664714913.html
I know the guy and he is a stand person. Not bad for good gearong with lockers. Two arb lockers with compressors will set you back at least 2000 without install not mentioning the regear cost and parts.
Sent from my SCH-I535 using Tapatalk 2
I don't see where it says there are ARB lockers and pumps...and, he mentions LSD in the rear. ARB's are open when not locked I believe. If you know they guy and he does, in fact, have ARB's in there he should list it.
-
Not a terrible deal....Complete front & rear rubi 44 setup $2,600. If you already had a 44 under your rig & turned around & sold that, it wouldn't be bad out of pocket.
http://atlanta.craigslist.org/nat/pts/3664714913.html
I know the guy and he is a stand person. Not bad for good gearong with lockers. Two arb lockers with compressors will set you back at least 2000 without install not mentioning the regear cost and parts.
Sent from my SCH-I535 using Tapatalk 2
I don't see where it says there are ARB lockers and pumps...and, he mentions LSD in the rear. ARB's are open when not locked I believe. If you know they guy and he does, in fact, have ARB's in there he should list it.
I think he is just saying that as a comparison.
I like how he is selling stock Rubicon axles for $2600, but then wants you to give away your D60 front axle just because it came from the junkyard. That may be the case, but street value on the right D60 is still $1000 or more.
-
Not a terrible deal....Complete front & rear rubi 44 setup $2,600. If you already had a 44 under your rig & turned around & sold that, it wouldn't be bad out of pocket.
http://atlanta.craigslist.org/nat/pts/3664714913.html
I know the guy and he is a stand person. Not bad for good gearong with lockers. Two arb lockers with compressors will set you back at least 2000 without install not mentioning the regear cost and parts.
Sent from my SCH-I535 using Tapatalk 2
I don't see where it says there are ARB lockers and pumps...and, he mentions LSD in the rear. ARB's are open when not locked I believe. If you know they guy and he does, in fact, have ARB's in there he should list it.
I think he is just saying that as a comparison.
10-4 on that
-
Not a terrible deal....Complete front & rear rubi 44 setup $2,600. If you already had a 44 under your rig & turned around & sold that, it wouldn't be bad out of pocket.
http://atlanta.craigslist.org/nat/pts/3664714913.html
I know the guy and he is a stand person. Not bad for good gearong with lockers. Two arb lockers with compressors will set you back at least 2000 without install not mentioning the regear cost and parts.
Sent from my SCH-I535 using Tapatalk 2
I don't see where it says there are ARB lockers and pumps...and, he mentions LSD in the rear. ARB's are open when not locked I believe. If you know they guy and he does, in fact, have ARB's in there he should list it.
I think he is just saying that as a comparison.
I like how he is selling stock Rubicon axles for $2600, but then wants you to give away your D60 front axle just because it came from the junkyard. That may be the case, but street value on the right D60 is still $1000 or more.
It is a comparison.
Yea the dumb version of buying a d60 cost that must but a super duty set is less than 1000. In stock form, the sd axles are stronger than a kp.
Sent from my SCH-I535 using Tapatalk 2
-
Rubi crawler
http://www.jkowners.com/forum/showthread.php?t=90062 (http://www.jkowners.com/forum/showthread.php?t=90062)
-
My daughter's car. Well, it could be a good deal. possibly.
{popcorn}
http://atlanta.craigslist.org/nat/cto/3675013386.html
-
Ben, your dream jeep is for sale
http://cgi.ebay.com/ebaymotors/181095653262?ru=http%3A%2F%2Fmotors.shop.ebay.com%3A80%2Fi.html%3F_trksid%3Dp4340.m570.l1313%26_nkw%3D181095653262%26_sacat%3D0%26_from%3DR40%26_fvi%3D1&_rdc=1 (http://"http://cgi.ebay.com/ebaymotors/181095653262?ru=http%3A%2F%2Fmotors.shop.ebay.com%3A80%2Fi.html%3F_trksid%3Dp4340.m570.l1313%26_nkw%3D181095653262%26_sacat%3D0%26_from%3DR40%26_fvi%3D1&_rdc=1")
-
Ben, your dream jeep is for sale
Lol
-
Ben, your dream jeep is for sale
http://cgi.ebay.com/ebaymotors/181095653262?ru=http%3A%2F%2Fmotors.shop.ebay.com%3A80%2Fi.html%3F_trksid%3Dp4340.m570.l1313%26_nkw%3D181095653262%26_sacat%3D0%26_from%3DR40%26_fvi%3D1&_rdc=1 (http://"http://cgi.ebay.com/ebaymotors/181095653262?ru=http%3A%2F%2Fmotors.shop.ebay.com%3A80%2Fi.html%3F_trksid%3Dp4340.m570.l1313%26_nkw%3D181095653262%26_sacat%3D0%26_from%3DR40%26_fvi%3D1&_rdc=1")
Nice porta potty. We should get it, so we have something to sh*t in.
-
Reserve not met... Imagine what he has into that POS!
-
steel wheels 15x8 6 on 5.5
http://atlanta.craigslist.org/nat/pts/3675141922.html
-
http://tuscaloosa.craigslist.org/cto/3700256882.html (http://tuscaloosa.craigslist.org/cto/3700256882.html)
Smokin' deal of the day!
-
Nice one!! //SLAMIN//
-
http://tuscaloosa.craigslist.org/cto/3700256882.html (http://tuscaloosa.craigslist.org/cto/3700256882.html)
Smokin' deal of the day!
Mobile home lotto winner?
Sent off camber
-
That's funny! Can't even spell Porsche, both cars have european plates, those cars don't come with V12s. My guess is it's a gold wrap
-
That's funny! Can't even spell Porsche, both cars have european plates, those cars don't come with V12s. My guess is it's a gold wrap
Definitely a fake ad. I like the 24K solid gold engine. Let me know how that works out.
-
here is nice one...good deal too
http://www.acadianadodge.net/used/Jeep/2011-Jeep-Wrangler+Unlimited-Lafayette-LA-dc84484f0a0d048d019e9038d1c0794e.htm (http://www.acadianadodge.net/used/Jeep/2011-Jeep-Wrangler+Unlimited-Lafayette-LA-dc84484f0a0d048d019e9038d1c0794e.htm)
-
here is nice one...good deal too
http://www.acadianadodge.net/used/Jeep/2011-Jeep-Wrangler+Unlimited-Lafayette-LA-dc84484f0a0d048d019e9038d1c0794e.htm (http://www.acadianadodge.net/used/Jeep/2011-Jeep-Wrangler+Unlimited-Lafayette-LA-dc84484f0a0d048d019e9038d1c0794e.htm)
That spare tire placement looks really goofy, but at least it's got a hemi ;D An interesting build for sure.
-
255/75SR17.0 Those look like 37's...
-
$80,000.00 <<--- I would not pay 80K for anything that says Jeep, especially this piece of shit
(http://pictures.dealer.com/a/acadianadodgecllc/1136/a4c66f82c230dad2ae6dea50b1beee05x.jpg)
-
$80,000.00 <<--- I would not pay 80K for anything that says Jeep, especially this piece of shit
Aftermarket Chinese rack?
Nice burn!
-
I did not see that pic. That is some serious shotty welding. They rattle can that rack? </LMAO/>
-
$80,000.00 <<--- I would not pay 80K for anything that says Jeep, especially this piece of shit
Aftermarket Chinese rack?
Nice burn!
Looks like some JB weld </LMAO/>
-
http://www.southernjeeps.org/phpbb/viewtopic.php?t=39396&highlight=
-
Kirk this is for you!
http://www.hardlinecrawlers.com/forums/index.php?topic=24494.0
http://i50.tinypic.com/szu58m.jpg
Sent off camber
-
http://www.southernjeeps.org/phpbb/viewtopic.php?t=39396&highlight=
Sweet set up.
Sent from my DROID RAZR using Tapatalk 2
-
Kirk this is for you!
http://www.hardlinecrawlers.com/forums/index.php?topic=24494.0
http://i50.tinypic.com/szu58m.jpg
Sent off camber
not bad, but needs a longer wheel base IMO.
-
http://www.southernjeeps.org/phpbb/viewtopic.php?t=39396&highlight=
I want the trailer!! $6500.00 >> F all of that talk about a $10K Jeep trailer
Crawler Hauler is also for sale, 2004 Tahoe Pak Rat $6500 has toilet, shower, fridge, AC and Heat, Queen size bed, tons of storage for size, also has a large screen porch that assembles on trailer deck , brand new tires less than 1000 miles, also includes generator
(http://i72.servimg.com/u/f72/17/89/15/35/jeep_o10.jpg)
(http://i44.servimg.com/u/f44/13/34/57/91/mobile10.jpg)
-
^^ yes, somebody buy that
-
I forgot who was purchasing the one from the west coast. Here is one a little closer.
http://www.hardlinecrawlers.com/forums/index.php?topic=24159.0
Sent from my DROID RAZR using Tapatalk 2
-
http://sport.woot.com/offers/smith-wesson-mp-307-lumen-flashlight
Smith & Wesson MP6 - 307 Lumen Tactical Flashlight with Strobe
$39.99
64% off List Price
-
$3500 Salvage TJ
http://atlanta.craigslist.org/wat/pts/3744652132.html
Good start for a trail rig.
-
Cool rig:
http://atlanta.craigslist.org/atl/cto/3730403468.html
-
Cool rig:
http://atlanta.craigslist.org/atl/cto/3730403468.html
Yep. Until I saw the price.
-
Cool rig:
http://atlanta.craigslist.org/atl/cto/3730403468.html
Yep. Until I saw the price.
Yep rare = pricey
Sent off camber
-
I'd rather have my Jeep! :smoke
-
My next job
http://atlanta.craigslist.org/atl/trd/3773983792.html
-
15" beadlocks...damn
http://www.ebay.com/itm/NEW-15x8-BEADLOCK-RACING-WHEEL-SET-BLACK-5-X-5-3-BS-CHEVY-BUICK-GM-OLDS-GMC-/290482338217?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item43a218b9a9 (http://www.ebay.com/itm/NEW-15x8-BEADLOCK-RACING-WHEEL-SET-BLACK-5-X-5-3-BS-CHEVY-BUICK-GM-OLDS-GMC-/290482338217?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item43a218b9a9)
-
15" beadlocks...damn
http://www.ebay.com/itm/NEW-15x8-BEADLOCK-RACING-WHEEL-SET-BLACK-5-X-5-3-BS-CHEVY-BUICK-GM-OLDS-GMC-/290482338217?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item43a218b9a9 (http://www.ebay.com/itm/NEW-15x8-BEADLOCK-RACING-WHEEL-SET-BLACK-5-X-5-3-BS-CHEVY-BUICK-GM-OLDS-GMC-/290482338217?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item43a218b9a9)
They say they are real, but they look like the simulated ones.
-
Yes, they do look fake. And no brand listed?
-
only 16 bolt?
8 for 399?
Sent off camber
-
Yes, they do look fake. And no brand listed?
it says Allied.
-
only 16 bolt?
8 for 399?
Sent off camber
They are selling them in sets of 4. They have 8 sets.
I'm not trying to sell these things, just posted an interesting sale. You gots to read and inquire yo dam self
-
</FAB/>
-
Yes, they do look fake. And no brand listed?
it says Allied.
Maybe he has the wrong picture. Allieds have 32 bolts. Those look like the wheels I have. Certainly this poster doesnt know what he is talking about. With Ebay you could probably get those for free after you buy them, just saying....
-
Yes, they do look fake. And no brand listed?
it says Allied.
Maybe he has the wrong picture. Allieds have 32 bolts. Those look like the wheels I have. Certainly this poster doesnt know what he is talking about. With Ebay you could probably get those for free after you buy them, just saying....
damn, someone on the internet fibbed </LMAO/>
-
Yes, they do look fake. And no brand listed?
it says Allied.
Maybe he has the wrong picture. Allieds have 32 bolts. Those look like the wheels I have. Certainly this poster doesnt know what he is talking about. With Ebay you could probably get those for free after you buy them, just saying....
damn, someone on the internet fibbed </LMAO/>
Nope internets is always right.
-
http://www.gatrailriders.com/GTRForums/index.php?topic=10850.0
I don't know this guy personally but it would be a good deal for someone. I'd paint those wheels black though. //SLAMIN//
-
20% off at Ruff Stuff for Mother's Day weekend. Damn.
MOTHER at checkout
http://www.ruffstuffspecialties.com/catalog/ (http://www.ruffstuffspecialties.com/catalog/)
-
20% off at Ruff Stuff for Mother's Day weekend. Damn.
MOTHER at checkout
http://www.ruffstuffspecialties.com/catalog/ (http://www.ruffstuffspecialties.com/catalog/)
And I ordered 300 dollars the week before
Sent from my SCH-I535 using Tapatalk 2
-
http://atlanta.craigslist.org/nat/pts/3801855211.html
-
http://atlanta.craigslist.org/nat/pts/3801855211.html
super deal. The 2011 and up are the soft tops you want.
-
Not on CL, but saw it on jk-f and local
(http://img.tapatalk.com/d/13/05/15/6a5adaqu.jpg)
-
hmmm
-
Not on CL, but saw it on jk-f and local
(http://img.tapatalk.com/d/13/05/15/6a5adaqu.jpg)
Good deal for someone
On another note...I have never heard anyone actually say, "these tires are too big"
-
for mall crawling they can be...
-
http://atlanta.craigslist.org/nat/pts/3767351778.html
good deal for a rebuild?
-
http://atlanta.craigslist.org/nat/cto/3823090257.html
Don't know if it's a deal but you don't see them every day. I would love to have one of these.
-
:terror :terror :terror
I WANT
(http://i176.photobucket.com/albums/w191/tngreenmachine/IMG_1118.jpg)
(http://i176.photobucket.com/albums/w191/tngreenmachine/IMG_1130.jpg)
-
URL: http://pages.ebay.com/motors/link/?nav=item.view&id=221238206758
Sent off camber
-
URL: http://pages.ebay.com/motors/link/?nav=item.view&id=221238206758
Sent off camber
That thing is so cool I can't stand it.
-
awe struck... </BEER/>
-
URL: http://pages.ebay.com/motors/link/?nav=item.view&id=261228974665
Sent off camber
-
URL: http://pages.ebay.com/motors/link/?nav=item.view&id=261228974665
Sent off camber
Ben's drooling
-
Love it. Tow rig, sleeper, show truck... all in one.
-
Ben, it's for sale, jump on it
http://cgi.ebay.com/ebaymotors/Jeep-Wrangler-Unlimited-Sahara-Sport-Utility-4-Door-COP-4X4-5-7-Hemi-V8-Kraken-54-Tires-Dwarfs-the-/181153997850?pt=US_Cars_Trucks&hash=item2a2d9ea41a&vxp=mtr (http://cgi.ebay.com/ebaymotors/Jeep-Wrangler-Unlimited-Sahara-Sport-Utility-4-Door-COP-4X4-5-7-Hemi-V8-Kraken-54-Tires-Dwarfs-the-/181153997850?pt=US_Cars_Trucks&hash=item2a2d9ea41a&vxp=mtr)
-
Ben, it's for sale, jump on it
http://cgi.ebay.com/ebaymotors/Jeep-Wrangler-Unlimited-Sahara-Sport-Utility-4-Door-COP-4X4-5-7-Hemi-V8-Kraken-54-Tires-Dwarfs-the-/181153997850?pt=US_Cars_Trucks&hash=item2a2d9ea41a&vxp=mtr (http://cgi.ebay.com/ebaymotors/Jeep-Wrangler-Unlimited-Sahara-Sport-Utility-4-Door-COP-4X4-5-7-Hemi-V8-Kraken-54-Tires-Dwarfs-the-/181153997850?pt=US_Cars_Trucks&hash=item2a2d9ea41a&vxp=mtr)
From the description:
"If your asking yourself, why, then this is not the Jeep for you! Why not, is what should come to mind!"
I'm asking myself why, so it must not be for me!
-
At least the welds "appear" right, the rest is a joke.
-
Tony, I will be nice and not say anything at all. WTF
-
Ben, it's for sale, jump on it
http://cgi.ebay.com/ebaymotors/Jeep-Wrangler-Unlimited-Sahara-Sport-Utility-4-Door-COP-4X4-5-7-Hemi-V8-Kraken-54-Tires-Dwarfs-the-/181153997850?pt=US_Cars_Trucks&hash=item2a2d9ea41a&vxp=mtr (http://cgi.ebay.com/ebaymotors/Jeep-Wrangler-Unlimited-Sahara-Sport-Utility-4-Door-COP-4X4-5-7-Hemi-V8-Kraken-54-Tires-Dwarfs-the-/181153997850?pt=US_Cars_Trucks&hash=item2a2d9ea41a&vxp=mtr)
From the description:
"If your asking yourself, why, then this is not the Jeep for you! Why not, is what should come to mind!"
I'm asking myself why, so it must not be for me!
Awe he must have sold it already! Post has been deleted.
Sent from my iPad using Tapatalk HD
-
I BET HE GOT HIS NUTS BUSTED AND REMOVED IT... {popcorn}
-
Nope, sold it... and cheap. Could build it down with that Hemi. Has a good core.
-
http://www.ebay.co.uk/itm/Mercedes-E320-Cdi-/230997858684?pt=Automobiles_UK&hash=item35c88b997c#ht_691wt_1347
-
Danny please buy this and make it awesome!
http://pages.ebay.com/motors/link/?nav=item.view&id=231013839019
Sent off camber
-
Danny please buy this and make it awesome!
http://pages.ebay.com/motors/link/?nav=item.view&id=231013839019
Sent off camber
Make it a sleeper with a turbo 5.3.
-
tempting....
http://atlanta.craigslist.org/nat/cto/3834755148.html
-
tempting....
http://atlanta.craigslist.org/nat/cto/3834755148.html
Show up with 11k in hand and I bet you could get it
Sent from my SCH-I535 using Tapatalk 4 Beta
-
Hey, I'm posting this for a good friend of mine. He is selling it for his dad. This is possibility the nicest YJ you will ever lay your eyes on.
http://atlanta.craigslist.org/nat/cto/3984156736.html (http://atlanta.craigslist.org/nat/cto/3984156736.html)
SOLD!
-
That is a nice jeep. Somebody should grab that one
-
That is a nice jeep. Somebody should grab that one
... and someone did... talk about a virgin!
-
Damn that was a quick sale, someone got a nice deal.
check out the fuel log...1995 gas, $1.04/gallon
-
Good deal of the day:
http://atlanta.craigslist.org/nat/cto/4001125719.html (http://atlanta.craigslist.org/nat/cto/4001125719.html)
-
Good deal of the day:
http://atlanta.craigslist.org/nat/cto/4001125719.html (http://atlanta.craigslist.org/nat/cto/4001125719.html)
Danny, Doug?
-
http://atlanta.craigslist.org/nat/cto/3929041236.html
Tony/Hayden? //;D//
-
I need a dually
Sent off camber
-
great deal for you JK guys!!
http://atlanta.craigslist.org/atl/pts/4043910245.html
free soft top....
-
CAN'T UNSEE!!!!
Someone shoot it before it spreads!
http://greenville.craigslist.org/cto/3987475821.html
-
What a fing waste. I am almost in tears right now. But at least you know it has never been wheeled.
Sent from my DROID RAZR using Tapatalk 4
-
CAN'T UNSEE!!!!
Someone shoot it before it spreads!
http://greenville.craigslist.org/cto/3987475821.html
I want it...how much $
I am evidently a beta user of Tapatalk 4 even though I paid for the software...this software is buggy.
-
http://greenville.craigslist.org/cto/4017653435.html
I am evidently a beta user of Tapatalk 4 even though I paid for the software...this software is buggy.
-
http://greenville.craigslist.org/cto/4017653435.html
I am evidently a beta user of Tapatalk 4 even though I paid for the software...this software is buggy.
//LMAO// fail.
-
That's some massive flex. If the tires where any bigger they would hit each other
Sent from my DROID RAZR using Tapatalk 4
-
http://greenville.craigslist.org/cto/4017653435.html
I am evidently a beta user of Tapatalk 4 even though I paid for the software...this software is buggy.
Why would you do that? I get making the swap to coilovers but taking a TJ and putting it on Springs? Sounds a little counter intuitive to me.
-
http://greenville.craigslist.org/cto/4017653435.html
I am evidently a beta user of Tapatalk 4 even though I paid for the software...this software is buggy.
Why would you do that? I get making the swap to coilovers but taking a TJ and putting it on Springs? Sounds a little counter intuitive to me.
Cheap way to get the 1 ton axles under it. Trust me there have been corners cut with that one.
-
http://www.jkowners.com/forum/showthread.php?t=117506
Sent from my iPhone using Tapatalk - now Free (http://tapatalk.com/m/)
-
^ that is a deal
-
Damn, I have the money for the vehicle...not the space or time....damn. :(
I am evidently a beta user of Tapatalk 4 even though I paid for the software...this software is buggy.
-
I've never heard a starter freezing up. Anyway, I'm signing up to pm the guy.
-
I have killed a couple of starters in my old 91 yj...mud caked was the death...iirc.
I am evidently a beta user of Tapatalk 4 even though I paid for the software...this software is buggy.
-
http://atlanta.craigslist.org/nat/cto/4063616906.html
-
You trading the bike?
Sent from my DROID RAZR using Tapatalk 4
-
http://enid.craigslist.org/cto/4119280944.html%3C/div%3E
-
Damn he put a lot into that add
Sent off camber
-
Lol that's been around for a week or so and is a good read.
-
I would like to have a beer with this dude. Freaking awesome add though
Sent from my DROID RAZR using Tapatalk
-
http://atlanta.craigslist.org/atl/cto/4105444474.html
-
That thing is beautiful!
-
Found this today. Very interesting.
http://atlanta.craigslist.org/nat/ctd/4138582712.html
Sent from my GT-P7510 using Tapatalk 4
-
Double post my bad
-
I dont know why I am not headed to pick this up right away. Almost too good to be true.
http://www.theoutdoorstrader.com/threads/544120-FS-1997-ford-e350-dually-7-3-hotshot-hauler-sleeper
-
I dont know why I am not headed to pick this up right away. Almost too good to be true.
http://www.theoutdoorstrader.com/threads/544120-FS-1997-ford-e350-dually-7-3-hotshot-hauler-sleeper
Trailer not included //:'(//
-
That would be a cool tow setup.
-
Friggin sweet!
-
Even without the trailer thats a sweet deal. Sleeper and ability to pull a goose neck all day long. 100+ gallons of diesel makes for an almost non stop trip to MOAB
-
Damn good selling points. I didn't read the ad
TAPATALK
-
Just not enough seats......
Sent off camber
-
Just not enough seats......
Sent off camber
Take out the bed and add three more buckets back there
-
http://atlanta.craigslist.org/nat/ctd/4150854127.html (http://atlanta.craigslist.org/nat/ctd/4150854127.html)
-
Saw this, seems like a good deal.
(http://img.tapatalk.com/d/13/11/11/ytu2uje2.jpg)
Sent off camber
-
What a deal!
lol...
http://atlanta.craigslist.org/nat/pts/4155832003.html
http://atlanta.craigslist.org/wat/pts/4183957555.html
44 with cast wedges and a 9" to match
http://atlanta.craigslist.org/wat/pts/4174274479.html
Probably junk
http://atlanta.craigslist.org/sat/pts/4183933019.html
-
This is to good to be true.
http://columbusga.craigslist.org/cto/4103178351.html
//LMAO// //:hlp//
-
That throttle body spacer is pure POWA!!!
-
Screw power. 10" lift 38's and 15-17 mpgs. I need some of that.
Sent from my DROID RAZR using Tapatalk
-
Rubicon D44 for a TJ for those needing to replace their D35s: http://www.jeepforum.com/forum/f126/2005-rubicon-dana-44-rear-axle-1789801/
-
Way to much for the rear.
-
No joke. This would be a better deal once you get him down a little
http://www.hardlinecrawlers.com/forums/index.php?topic=29142.0
Sent from S3
-
Ok, so if you have a few extra minutes read the creative writing of this Non-Jeep ad. There are parts of this that had me laughing out loud. //LMAO//
http://annarbor.craigslist.org/cto/4211478859.html (http://annarbor.craigslist.org/cto/4211478859.html)
-
This cold become a sweet trail rig
http://atlanta.craigslist.org/atl/cto/4227362037.html (http://atlanta.craigslist.org/atl/cto/4227362037.html)
-
Ok, so if you have a few extra minutes read the creative writing of this Non-Jeep ad. There are parts of this that had me laughing out loud. //LMAO//
http://annarbor.craigslist.org/cto/4211478859.html (http://annarbor.craigslist.org/cto/4211478859.html)
Nice!
-
This cold become a sweet trail rig
http://atlanta.craigslist.org/atl/cto/4227362037.html (http://atlanta.craigslist.org/atl/cto/4227362037.html)
Might trade for a lawn mower //LMAO//
-
Asking $150 for a D44 with disk brakes and 4.10s from a Rodeo. Axle lugs will need a conversion to match Jeep standards.
http://atlanta.craigslist.org/nat/pts/4231050873.html
-
This cold become a sweet trail rig
http://atlanta.craigslist.org/atl/cto/4227362037.html (http://atlanta.craigslist.org/atl/cto/4227362037.html)
That would be cool.
-
Seems like a good start, but I am not up to date on JKs.
http://atlanta.craigslist.org/nat/cto/4231807000.html
-
Seems like a good start, but I am not up to date on JKs.
http://atlanta.craigslist.org/nat/cto/4231807000.html
Seems to be a decent deal for a '13 on tons. 45,000 is a lot to put on the rocks in my opinion, without being a buggy.
Sent from my GT-P7510 using Tapatalk 4
-
Damn, all of that and still on 37s.
-
Still driven on the street
Sent from my GT-P7510 using Tapatalk 4
-
Seems like a good start, but I am not up to date on JKs.
http://atlanta.craigslist.org/nat/cto/4231807000.html
Seems to be a decent deal for a '13 on tons. 45,000 is a lot to put on the rocks in my opinion, without being a buggy.
Sent from my GT-P7510 using Tapatalk 4
At least its built with the right stuff. About 10k in axles alone.
Sent from my SCH-I535 using Tapatalk
-
Seems like a good start, but I am not up to date on JKs.
http://atlanta.craigslist.org/nat/cto/4231807000.html
Seems to be a decent deal for a '13 on tons. 45,000 is a lot to put on the rocks in my opinion, without being a buggy.
Sent from my GT-P7510 using Tapatalk 4
At least its built with the right stuff. About 10k in axles alone.
Sent from my SCH-I535 using Tapatalk
Very true. But if I drop dime like that I don't want to have to worry about body damage and that rig is lacking a lot in the protection category. Just my opinion though, some of the big rollers here may think different. :D
Sent from my GT-P7510 using Tapatalk 4
-
Still driven on the street
Sent from my GT-P7510 using Tapatalk 4
I'm surprised he didn't have a second set of tires for off-road to match the rest of the build. Maybe he had plans and backed out OR maybe he had them and sold them separately. Still seems strange to go that far and then walk away from it.
-
Still driven on the street
Sent from my GT-P7510 using Tapatalk 4
I'm surprised he didn't have a second set of tires for off-road to match the rest of the build. Maybe he had plans and backed out OR maybe he had them and sold them separately. Still seems strange to go that far and then walk away from it.
I agree with this. Never know what people are thinking.
Sent from my DROID RAZR using Tapatalk
-
He is only selling because he has re-evaluated what is important to him and his family, or his wife did it for him lol, but he is doing what is right for him.
I can tell you from personal experience that when you build a $50k plus rig and go out and scratch it up on the trail, there is a buyers remorse that comes on called REALITY that says WOW I've made a huge investment and don't want to beat it up, and what kind of rig could I have built for this cost that is made to handle bouncing off of inanimate objects? //;D//
-
I can tell you from personal experience that when you build a $50k plus rig and go out and scratch it up on the trail, there is a buyers remorse that comes on called REALITY that says WOW I've made a huge investment and don't want to beat it up, and what kind of rig could I have built for this cost that is made to handle bouncing off of inanimate objects? //;D//
yup //peek//
-
I can tell you from personal experience that when you build a $50k plus rig and go out and scratch it up on the trail, there is a buyers remorse that comes on called REALITY that says WOW I've made a huge investment and don't want to beat it up, and what kind of rig could I have built for this cost that is made to handle bouncing off of inanimate objects? //;D//
From the age of 15 to 43 all I was about was classic cars and muscle cars...
money money money, cleaning waxing, wiping off finger prints from asshole's
who couldn't shut the door with the door handle.....LOL
The last ten years I've had my Jeep has been the most freakin fun ever.....
yea the first few years I tried to keep the scratches down but those finally
turned into a dent here, busted fender flare there......Life is wonderful living
like that and not worrying about how shiny, or how much the water beads up
on your baby
-
I have always said "If I buy a brand new jeep, I will kick a dent in it before I get in it and drive it off the lot." //cheers2//
It will save me the heartache later on the trail. //:'(//
BTW this is the longest I have own a working jeep and not taken it off road to try it out. //:hlp//
-
I have always said "If I buy a brand new jeep, I will kick a dent in it before I get in it and drive it off the lot." //cheers2//
It will save me the heartache later on the trail. //:'(//
BTW this is the longest I have own a working jeep and not taken it off road to try it out. //:hlp//
You gotta have a mall close by
-
I have always said "If I buy a brand new jeep, I will kick a dent in it before I get in it and drive it off the lot." //cheers2//
It will save me the heartache later on the trail. //:'(//
BTW this is the longest I have own a working jeep and not taken it off road to try it out. //:hlp//
You gotta have a mall close by
//LMAO// //LMAO// //LMAO// //LMAO//
-
FOr me its like having a really nice guitar and then only hanging it on the wall in a glass box and never playing it. If you play it at gigs, its going to get scratches, gunk, wear whatever am maybe even get real damage. But thats what its made for. YOu meet a beautiful girl, get married (as you may) , after awhile you keep it up, and bam she's pregnant. Now your beautiful ladyfriend has a baby hanging on all the time and also she has to push that thing out her belly so theres some body damange and she doesn't dress up all the time anymore. But hey ....
Life is still beautiful in some state of dissarray, thats the magic of life while we humans like perfection, lifes not perfect ever. I like the Jeep thing because it ties in well to that, its made for it. I think my wife is more beautiful to me now that she's older, and same with my guitars, and my JKU. IF you love something you take care of it, not try to keep it perfect, thats obsession.
-
FOr me its like having a really nice guitar and then only hanging it on the wall in a glass box and never playing it. If you play it at gigs, its going to get scratches, gunk, wear whatever am maybe even get real damage. But thats what its made for. YOu meet a beautiful girl, get married (as you may) , after awhile you keep it up, and bam she's pregnant. Now your beautiful ladyfriend has a baby hanging on all the time and also she has to push that thing out her belly so theres some body damange and she doesn't dress up all the time anymore. But hey ....
Life is still beautiful in some state of dissarray, thats the magic of life while we humans like perfection, lifes not perfect ever. I like the Jeep thing because it ties in well to that, its made for it. I think my wife is more beautiful to me now that she's older, and same with my guitars, and my JKU. IF you love something you take care of it, not try to keep it perfect, thats obsession.
(http://global3.memecdn.com/nailed-it_o_1924693.jpg)
-
Now that is some funny shit.....I don't care who you are
-
You can always buy another beautiful girlfriend...uh, I mean Jeep.
-
No throat punches, hmmm....
Nice one Matt!
-
Not to change the subject but anyone got a jeep for this poor girl.
http://atlanta.craigslist.org/nat/bar/4241686241.html
Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)
-
Is that a trick question? You want the one year that a wrangler was not produced. I cant tell if the girl or guy wants a jeep or a date //LMAO//
-
Just thought the post was worth a chuckle.
Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)
-
I agree. The picture is kind of creepy
-
That is indeed odd
-
Very interesting add
Sent from my DROID RAZR using Tapatalk
-
I changed the post so no one thinks this is my personal add.
Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)
-
Good little CB for someone who needs one.
http://atlanta.craigslist.org/sat/ele/4170402037.html
-
I want this!
http://madison.craigslist.org/cto/4240915852.html
-
I want this!
http://madison.craigslist.org/cto/4240915852.html
Looks cool, but I seriously doubt it sleeps 3 comfortably!
-
I want to know why he thought it was a good idea to ruin a perfectly good jeep? Am I alone on that thought?
-
I want to know why he thought it was a good idea to ruin a perfectly good jeep? Am I alone on that thought?
Could have been a bad front end collision?
Sent from my SAMSUNG-SGH-I537 using Tapatalk
-
No doubt it was the back half of a salvage
Sent off camber
-
Amazon
Great deal on ball joints
Phttp://www.amazon.com/Alloy-USA-11800-Wrangler-Cherokee/dp/B009RP89V6/ref?tag=vglnk-c1061-20 (http://www.amazon.com/Alloy-USA-11800-Wrangler-Cherokee/dp/B009RP89V6/ref?tag=vglnk-c1061-20)
-
Based on my experience with those BJs, I would buy them locally. the return process through Amazon would have been a nightmare compared to what I did with Danny/Allsouth.
-
good price though.
-
Amazon has taken anything back from me no questions asked, even after I opened a box after the return period and the item inside was incorrect and I could have been screwed for hundreds.
That said there is no substitute for a good local shop.
Sent off camber
-
I was specifically talking/writing about this item since my experience had been that once you take out the old BJs, you aren't able to use them again, so if there is a problem and the force a return before replacement, then you're in a pickle.
-
I was specifically talking/writing about this item since my experience had been that once you take out the old BJs, you aren't able to use them again, so if there is a problem and the force a return before replacement, then you're in a pickle.
Perfect scenario for local supply and service.
-
Not cl, but close enough. Rock crawler in tx. Few problems, but seam small enough for the price
http://www.wranglerforum.com/f139/selling-my-rock-crawler-rig-houston-400282.html (http://www.wranglerforum.com/f139/selling-my-rock-crawler-rig-houston-400282.html)
Sent from my SAMSUNG-SGH-I537 using Tapatalk
-
Not cl, but close enough. Rock crawler in tx. Few problems, but seam small enough for the price
http://www.wranglerforum.com/f139/selling-my-rock-crawler-rig-houston-400282.html (http://www.wranglerforum.com/f139/selling-my-rock-crawler-rig-houston-400282.html)
Sent from my SAMSUNG-SGH-I537 using Tapatalk
not bad for the price.
-
That thing is sweet.
-
If it was a bit closer I'd likely have it on the trailer tonight.
-
If it was a bit closer I'd likely have it on the trailer tonight.
You can always go drive over there or get the guy to meet you. Do it //SLAMIN//
-
Not sure if it's a good deal, but cool specs...
http://dallas.craigslist.org/dal/cto/4285711251.html
-
Anyone need a powered top?
http://atlanta.craigslist.org/sat/pts/4298721380.html
-
http://atlanta.craigslist.org/wat/pts/4254123280.html
Sent from my iPhone using Tapatalk
-
Thats a pretty good deal right there
-
Yeah it was tough to realize 35s won't be in my near future
Sent from my iPhone using Tapatalk
-
Dana 44 rear end 600
http://atlanta.craigslist.org/nat/for/4304506408.html
Sent from my iPhone using Tapatalk
-
Dana 44 rear end 600
http://atlanta.craigslist.org/nat/for/4304506408.html
Sent from my iPhone using Tapatalk
If that's a Currie 44 that's a screaming deal.
Sent from my SCH-I535 using Tapatalk
-
Thats what I was thinking. Either that or something not even close. Why not more details.
Sent from a 4g signal.
-
http://atlanta.craigslist.org/atl/pts/4305866211.html
Sent from my iPhone using Tapatalk
-
http://atlanta.craigslist.org/eat/pts/4306008053.html
Sent from my iPhone using Tapatalk
-
http://www.hardlinecrawlers.com/forums/index.php?topic=30416.0
-
http://atlanta.craigslist.org/nat/cto/4306286208.html
-
pretty good deal on D rings for those that may need them
http://www.jkowners.com/forum/showthread.php?t=155913 (http://www.jkowners.com/forum/showthread.php?t=155913)
-
Home depot had this deal going on in stores. Not available online. Most stores around me were out of stock, but they sold me the display for a little more off.
Makita combo kit. 18v 3.0 drill/driver, circular saw, batteries, quick charger $200
http://www.amazon.com/gp/aw/d/B00F6J1A4K (http://www.amazon.com/gp/aw/d/B00F6J1A4K)
Sent from my SAMSUNG-SGH-I537 using Tapatalk
-
TJ Rubicon complete axles 3000
http://atlanta.craigslist.org/nat/pts/4318379436.html
Not Stuck
-
TJ Rubicon complete axles 3000
http://atlanta.craigslist.org/nat/pts/4318379436.html
Not Stuck
thats me, if any one wants to know more info.
I am about to just tear them down and part them out. Thinking the sum of the parts are worth more than complete axles. Or put them back under the TJ and put the ProRocks under the JK, then I still have another set of axles to sell.
-
Scoutmob track day deal
http://handpicked.scoutmob.com/atlanta/hand-picked/xtreme-xperience-race-a-luxury-vehicle (http://handpicked.scoutmob.com/atlanta/hand-picked/xtreme-xperience-race-a-luxury-vehicle)
-
CO2 tanks for possible OBA solution - http://athensga.craigslist.org/for/4319634746.html
-
If anyones looking for a rear sterling for cheap..
https://atlanta.craigslist.org/nat/pts/4315652932.html
-
If anyones looking for a rear sterling for cheap..
https://atlanta.craigslist.org/nat/pts/4315652932.html
$250 or so would be about right.
-
Drugs are a powerful thing
http://atlanta.craigslist.org/atl/pts/4333478909.html
I wish this was going to be around longer than i know it will
http://atlanta.craigslist.org/atl/pts/4342347959.html
-
This seems like a pretty sick deal on some 60s plus more. http://atlanta.en.craigslist.org/atl/pts/4309435020.html (http://atlanta.en.craigslist.org/atl/pts/4309435020.html )
Sent from my SAMSUNG-SGH-I537 using Tapatalk
-
JK guys...
http://atlanta.craigslist.org/atl/pts/4347253346.html
-
Here is the low cost beater we've all been looking for
http://www.pirate4x4.com/forum/vehicles-trailers-sale/1643026-wtt-buggy.html
Sent off camber
-
Here is the low cost beater we've all been looking for
http://www.pirate4x4.com/forum/vehicles-trailers-sale/1643026-wtt-buggy.html
Sent off camber
Not bad. Sure beats cutting a rig up and the amount of money that would be spent. Won't feel that bad when you roll it either.
Sent from my SCH-I535 using Tapatalk
-
This would make a sweet recovery vehicle.
http://atlanta.craigslist.org/atl/cto/4347295289.html
-
Pretty good deal on a tow rig
http://atlanta.craigslist.org/eat/cto/4321625889.html
TAPATALK
-
Pretty good deal on a tow rig
http://atlanta.craigslist.org/eat/cto/4321625889.html
TAPATALK
and here's another one...
http://atlanta.craigslist.org/nat/cto/4350198844.html (http://atlanta.craigslist.org/nat/cto/4350198844.html)
-
Northern Tool. 500lbs.
(http://img.tapatalk.com/d/14/03/02/y9aty9y7.jpg)
-
I need 1 of those
-
I can grab it for you, if you PayPal me...assuming you don't have an NT close. Just let me know.
-
I can grab it for you, if you PayPal me...assuming you don't have an NT close. Just let me know.
Clark, did you get one and test fit it? Some say it conflicts with the spare tire...or the gear you put on it does.
-
I have not used one of these.
-
I can't run the spare with mine. If you have a real hitch then it shouldn't be an issue. My bumper has the reciever built in and it is conflicting. I just remove the spare when using
-
cool trailer for sale
http://atlanta.craigslist.org/atl/for/4331697312.html (http://atlanta.craigslist.org/atl/for/4331697312.html)
-
Real nice 81 Scrambler for sale. Not sure if anyone on here knows this one (or owns it)...
http://atlanta.craigslist.org/atl/cto/4300770415.html (http://atlanta.craigslist.org/atl/cto/4300770415.html)
-
Very nice,doubt you could build it for that price
-
Very clean cj8 that's been on the craigslist for some time now.
Sent from my DROID RAZR using Tapatalk
-
Warn recovery strap $29.99 w/ free shipping...at least 50% cheaper than just about everywhere else...
http://www.ebay.com/itm/WARN-29899-Premium-Recovery-Strap-3-x-30-Feet-21-600-lbs-Cap-/390783026171?_trksid=p2054897.l4275 (http://www.ebay.com/itm/WARN-29899-Premium-Recovery-Strap-3-x-30-Feet-21-600-lbs-Cap-/390783026171?_trksid=p2054897.l4275)
-
Warn recovery strap $29.99 w/ free shipping...at least 50% cheaper than just about everywhere else...
http://www.ebay.com/itm/WARN-29899-Premium-Recovery-Strap-3-x-30-Feet-21-600-lbs-Cap-/390783026171?_trksid=p2054897.l4275 (http://www.ebay.com/itm/WARN-29899-Premium-Recovery-Strap-3-x-30-Feet-21-600-lbs-Cap-/390783026171?_trksid=p2054897.l4275)
nice find. I'm getting one
Sent from my SAMSUNG-SGH-I537 using Tapatalk
-
Link is now 39.99 + 10 shipping
Sent off camber
-
Anyone disagree with the price ?
http://atlanta.craigslist.org/atl/cto/4373482165.html
Guado
-
well, not sure but listing the CB and the firestick, should not be selling points. IMO and... he pic of the tire was the spare.. lol If you are interested, take it to danny, let them give it
a once over, they will give you a better feel of its condition. IMO
-
Kent,
Sorry it's mine. I was trying to get constructive criticism on my post. I think a jk will fit my family better and I think the rubicon is overkill for us.
Guado
-
Kent,
Sorry it's mine. I was trying to get constructive criticism on my post. I think a jk will fit my family better and I think the rubicon is overkill for us.
Guado
no worries, list the engine, miles, .. for me , fluff is less of a selling point. but thats me. not my intention to bash, look at other rubi adds, see how / what they list. do u have any upgraded skids? stuff like that.
I thought u where looking to buy it. lol sorry.
so u are looking for a JK or JKU? price wise, i think u are in the ball park. rubi's are worth more. also, mention you gear's etc, lockers upgrades... all that good wheel stuff.
-
Roger that sir, thank your for the input.
Guado
-
Oh, I think a jk, my boys will still fit back there till they are about 13 or so.
Guado
-
Usually $150, on sale for $70. Porter cable 1gal air compressor. http://m.homedepot.com/p/Porter-Cable-1-Gal-Portable-Electric-Air-Compressor-C1010/202692683?cm_mmc=shopping-_-googleads-_-pla-_-202692683&skwcid&kwd=&ci_sku=202692683&ci_kw=&ci_gpa=pla&ci_src=298346236 (http://m.homedepot.com/p/Porter-Cable-1-Gal-Portable-Electric-Air-Compressor-C1010/202692683?cm_mmc=shopping-_-googleads-_-pla-_-202692683&skwcid&kwd=&ci_sku=202692683&ci_kw=&ci_gpa=pla&ci_src=298346236)
Sent from my SAMSUNG-SGH-I537 using Tapatalk
-
Great deal on a ready to roll truggy for someone - $4650
http://www.hardlinecrawlers.com/forums/index.php?topic=31434.0
-
Seen that...not to bad
-
This top belongs to a friend of mine.
http://chattanooga.craigslist.org/pts/4385099955.html
-
I can sell just about anything, but it comes with a price. I have to deal with these kind of people. (http://img.tapatalk.com/d/14/03/23/de4e7upa.jpg)
-
Haha I feel u will!!
Sent from my iPhone using Tapatalk
-
//LMAO//
-
The optima picture is the best part.
Guado
-
I keep running across this dana 60 in my search for an axle. It would be exactly what I need if it wasn't pressed off 3" for a jeep! Thought one of you guys might buy it so I can quit seeing it and getting mad every time I search cl!
http://savannah.craigslist.org/pts/4343232860.html
Sent from my iPhone using Tapatalk
-
Good deal on a Currie RJ d60 rear. Semi-float, but still a hell of a discount even with shipping.
http://www.jkowners.com/forum/showthread.php?t=161697
-
Tires & axle
http://knoxville.craigslist.org/boa/4391924034.html
-
Good deal on a Currie RJ d60 rear. Semi-float, but still a hell of a discount even with shipping.
http://www.jkowners.com/forum/showthread.php?t=161697
I want the motor he is running.
Sent from my SCH-I535 using Tapatalk
-
Good deal on a Currie RJ d60 rear. Semi-float, but still a hell of a discount even with shipping.
http://www.jkowners.com/forum/showthread.php?t=161697
I want the motor he is running.
Sent from my SCH-I535 using Tapatalk
Holy balls Batman. I just reread that.
-
http://atlanta.craigslist.org/nat/rvs/4404816219.html
Sent from my SCH-I605 using Tapatalk
-
That is solid!!
-
That's awesomw
-
Man that's sweet setup
Sent from my SCH-I545 using Tapatalk
-
Good deal on a bouncer - $16,000
http://www.hardlinecrawlers.com/forums/index.php?topic=32396.0
-
Potential Moab tow pig.
http://www.jjkane.com/search/detail.php?sku=61261
Sent off camber
-
Potential Moab tow pig.
http://www.jjkane.com/search/detail.php?sku=61261
Sent off camber
Wouldn't won't the motor with a lot deletes.
-
Pretty cool little rig.
http://www.pirate4x4.com/forum/vehicles-trailers-sale/1690346-single-seat-buggy.html#post25139562
-
Someone in need of a ProRock 44 front and Currie D60 rear? This guy will trade for stock axles + $6000. Sounds like a pretty good deal to me.
http://www.jkowners.com/forum/showthread.php?t=173682
-
Smoking deal
Sent from my SAMSUNG-SGH-I537 using Tapatalk
-
Another cool affordable buggy
http://www.hardlinecrawlers.com/forums/index.php?topic=30999.0
-
http://nashville.craigslist.org/pts/4399257851.html
Guado
-
Darn, wish I had a grand laying around
http://atlanta.craigslist.org/nat/pts/4425457112.html
Guado
-
not to bad for someone a tow pig
http://atlanta.craigslist.org/nat/cto/4418215197.html
-
http://atlanta.craigslist.org/atl/ctd/4427220751.html //:o//
-
//:o// //:o// //:o// //:o// //:o// //:o//
-
Yes please! I'll take any car on this page http://www.classiccarliquidators.com/classic-muscle-cars
-
Tow pig.
http://auburn.craigslist.org/pts/4415612686.html
-
This has to be a typo, but still.. greatest deal EVER!!!
http://columbusga.craigslist.org/cto/4423789648.html
-
//LMAO//
http://pittsburgh.craigslist.org/hsh/4441989990.html
-
here is a smoking deal.... //LMAO//
http://jacksonville.craigslist.org/cto/4380007974.html (http://jacksonville.craigslist.org/cto/4380007974.html)
-
here is a smoking deal.... //LMAO//
http://jacksonville.craigslist.org/cto/4380007974.html (http://jacksonville.craigslist.org/cto/4380007974.html)
Wow, if that sold, I'm quitting my job and building jeeps in Jacksonville.
Sent from my SAMSUNG-SGH-I537 using Tapatalk
-
here is a smoking deal.... //LMAO//
http://jacksonville.craigslist.org/cto/4380007974.html (http://jacksonville.craigslist.org/cto/4380007974.html)
I am sure there are Jeeps that will tackle the trail better, or crawl up some rocks better, but I assure you that there aren't any that will look better
//LMAO//
-
For the HP Dana 30 folks.
http://chattanooga.craigslist.org/pts/4446462014.html
-
http://chattanooga.craigslist.org/pts/4439887183.html
for the JK crowd
-
Not bad for a set of axles to work with, TJ guys.
https://atlanta.craigslist.org/nat/pts/4449776648.html
-
http://www.southernjeeps.org/phpbb/viewtopic.php?t=39999&highlight=&sid=3cbec041cdec38ce61cf48f7e3d8ca01
Jeep TJ Undercover Fab Skid Plate and Rocker Guards
-
Yep saw that on craigslist this morning also
-
Tow Rig
http://atlanta.craigslist.org/atl/cto/4447063507.html
-
Tow Rig
http://atlanta.craigslist.org/atl/cto/4447063507.html
That auto Trans is not the best but yeah, that baby will pull. Not a bad deal
-
Damn, think this will sell for $41K? http://atlanta.craigslist.org/sat/cto/4458451955.html (http://atlanta.craigslist.org/sat/cto/4458451955.html)
How do you have $60K in a JK and still have stock axles? Not hating, just curious.
-
Damn, think this will sell for $41K? http://atlanta.craigslist.org/sat/cto/4458451955.html (http://atlanta.craigslist.org/sat/cto/4458451955.html)
How do you have $60K in a JK and still have stock axles? Not hating, just curious.
Unfortunately it's easy to do lol.
-
How do you have $60K in a JK and still have stock axles? Not hating, just curious.
bad decisions lol
-
Damn, think this will sell for $41K? http://atlanta.craigslist.org/sat/cto/4458451955.html (http://atlanta.craigslist.org/sat/cto/4458451955.html)
How do you have $60K in a JK and still have stock axles? Not hating, just curious.
Unfortunately it's easy to do lol.
without axles I would say you would have to seriously overpay for all that other crap. But whatever, not mine to worry about.
-
Doug... //:hlp//
-
If he gets 41k I am posting mine for sale. LOL!
-
http://atlanta.craigslist.org/nat/for/4454073813.html
-
Not too bad
http://www.hardlinecrawlers.com/forums/index.php?topic=32904.0
-
Not too bad
http://www.hardlinecrawlers.com/forums/index.php?topic=32904.0
Don't be fooled, that thing is not "TJ ready". It will take some serious investment in parts and/or labor to get it in a TJ.
-
Yeah the triangulated 4 link would be nice but isn't bolt in.
-
http://www.hardlinecrawlers.com/forums/index.php?topic=33306.msg0;topicseen#new
Cheap winch for the taking. located in Dallas. will prolly take less with cash.
-
http://atlanta.craigslist.org/nat/cto/4472998043.html (http://atlanta.craigslist.org/nat/cto/4472998043.html)
Just another $80K jeep with stock dana44s.
-
http://atlanta.craigslist.org/nat/cto/4472998043.html (http://atlanta.craigslist.org/nat/cto/4472998043.html)
Just another $80K jeep with stock dana44s.
And most of the stuff he listed is bolt on mall crawler crap.
-
http://atlanta.craigslist.org/nat/cto/4472998043.html (http://atlanta.craigslist.org/nat/cto/4472998043.html)
Just another $80K jeep with stock dana44s.
And most of the stuff he listed is bolt on mall crawler crap.
I know. It annoys me more than it should. Probably hoping to sell to an athlete or something.
Sent from my SAMSUNG-SGH-I537 using Tapatalk
-
It came out of a tj
Sent from my SM-N900V using Tapatalk
-
It came out of a tj
Sent from my SM-N900V using Tapatalk
Cats bark after they talk to their parents.
-
Beer club night?
Sent from my SM-N900V using Tapatalk
-
I don't get what's going on. Maybe it will make sense tomorrow when I haven't been drinking
Sent from my SAMSUNG-SGH-I537 using Tapatalk
-
Guessing it will make even less sense when you're not drinking!
-
I don't get what's going on. Maybe it will make sense tomorrow when I haven't been drinking
Sent from my SAMSUNG-SGH-I537 using Tapatalk
Likewise
-
The cat farts after midnight
-
TJ, 4.0, $4500. Looks like sweet deal
http://gulfport.craigslist.org/cto/4466896509.html (http://gulfport.craigslist.org/cto/4466896509.html )
Sent from my SAMSUNG-SGH-I537 using Tapatalk
-
20% off from White Hat Holsters through Memorial Day.
Coupon code - MEMORIAL2014
http://www.whitehatholsters.com/ (http://www.whitehatholsters.com/)
-
20% off from White Hat Holsters through Memorial Day.
Coupon code - MEMORIAL2014
http://www.whitehatholsters.com/ (http://www.whitehatholsters.com/)
nice!
-
Deal of the year.
JK on 46s $21k
http://greenville.craigslist.org/cto/4493665221.html
-
That was on FB this morning. I told him he could take the tellico sticker off now //LMAO//
-
Sweet deal
-
Deal of the year.
JK on 46s $21k
http://greenville.craigslist.org/cto/4493665221.html
leaf spring rear???
-
Deal of the year.
JK on 46s $21k
http://greenville.craigslist.org/cto/4493665221.html
leaf spring rear???
It's like wiping before you poo, doesn't make sense.
Sent from my SAMSUNG-SGH-I537 using Tapatalk
-
Cheap and effective. Not the best route but not that bad either. Blue torch offers a stretch kit for the TJs that converts rear to leaf. Way cheaper way to stretch one than links, brackets, struts/coilovers.
-
If it works, don't down it. Billy has a waggy 44 under his TJ on leafs and it works awesome. Cheap and effective.
-
Blue torch offers a stretch kit for the TJs that converts rear to leaf.
I love the way XJ's work with coils/springs. 1/4 elliptical suspension works well too but you don't see people going back to it.
I never felt like the BFT kit was cheap.
299.99 for the one part of it.
65.99 for the other part.
Then you need
New shocks
shock mounts
Leaf springs
ubolts and plates
Spring perches
-
Managed to find this rare gem this morning. For you movie buffs, this is a steal.
http://atlanta.craigslist.org/atl/cto/4502710796.html
-
I want this so bad...
http://atlanta.craigslist.org/nat/cto/4494944413.html (http://atlanta.craigslist.org/nat/cto/4494944413.html)
-
I want this so bad...
http://atlanta.craigslist.org/nat/cto/4494944413.html (http://atlanta.craigslist.org/nat/cto/4494944413.html)
get it
Sent from my SAMSUNG-SGH-I537 using Tapatalk
-
Not to cheap, but pretty badass!!
http://atlanta.craigslist.org/nat/cto/4464094286.html
TAPATALK
-
I want this so bad...
http://atlanta.craigslist.org/nat/cto/4494944413.html (http://atlanta.craigslist.org/nat/cto/4494944413.html)
get it
Sent from my SAMSUNG-SGH-I537 using Tapatalk
I have been looking for one of those in good shape for a while. Too bad I can only have one money pit with wheels.
-
Yeah, I'm down to split a secret storage garage with a few people. Wives don't need to know about our bikes, trucks, trailers, boats, etc
Sent from my SAMSUNG-SGH-I537 using Tapatalk
-
I want this so bad...
http://atlanta.craigslist.org/nat/cto/4494944413.html (http://atlanta.craigslist.org/nat/cto/4494944413.html)
That V6 and drivetrain is junk. Probably has a 35 rear and has a disco d30. I have a buddy that stuffed a 6.0 LS down in his XJ and now i want to do the same to an MJ reallllly bad..
I'm not crazy about the long bed, but that's not a bad price for most of what i have seen on Atl CL. The headerpanel is easy to fix, and it even has a 10 slot grill. Tail lights are in good shape too.
I would bob the bed if it was ever going offroad. I have seen two MJ's locally with short beds and am going to leave a note on one of them when i see it again.
-
Anyone interested in a built 8.8 for a TJ? Set up for a 4 link
(http://img.tapatalk.com/d/14/06/09/ubahamu5.jpg)
-
http://chattanooga.craigslist.org/pts/4524610088.html
this is mine if anyone needs a good spare, ill do the club a little better on the price..
-
http://atlanta.craigslist.org/atl/pts/4529263698.html
-
http://atlanta.craigslist.org/atl/pts/4529263698.html
That's a smoking deal. I would be sure to check and see if those are homemade beadlocks...good for crawling but super tough to balance for the street.
-
They are weld on beadlocks. And it is 5 on4-1/2.
-
Something sounds fishy... That is ridiculously cheap.
-
He has had them on hardline for awhile. Eric is a good guy.
-
He has had them on hardline for awhile. Eric is a good guy.
Yep. I was interested in them, but he is too far away.
-
I live in Auburn, if someone wants to arrange it I will pick them up and bring them to the shop or potentially Chocco next month
-
Pretty good deal on some new model surplus trailers.
http://atlanta.craigslist.org/sat/cto/4512182287.html (http://atlanta.craigslist.org/sat/cto/4512182287.html)
-
Love this one...
http://atlanta.craigslist.org/nat/cto/4548769264.html (http://atlanta.craigslist.org/nat/cto/4548769264.html)
-
Not a terrible price
http://www.hardlinecrawlers.com/forums/index.php?topic=34456.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=34456.0)
-
Not a terrible price
http://www.hardlinecrawlers.com/forums/index.php?topic=34456.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=34456.0)
Pretty much the going rate. Probably won't last too long if it's in good shape.
-
@Michigunman should buy it.
It looks mint. I don' know if they all come with 1330 front yokes or not, but that could be changed to a 1310.
-
@Michigunman should buy it.
It looks mint. I don' know if they all come with 1330 front yokes or not, but that could be changed to a 1310.
I should, that could be a pretty good deal. Jeep fund can't really support it right now. Next up is trailer and some other "stuff" in the works.
-
This looks like a fair price on a good trailer. Wish I could have found a used one of these before I bought deckover.
http://www.hardlinecrawlers.com/forums/index.php?topic=34564.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=34564.0)
-
This looks like a fair price on a good trailer. Wish I could have found a used one of these before I bought deckover.
http://www.hardlinecrawlers.com/forums/index.php?topic=34564.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=34564.0)
We will be relatively close when we go to Harlan
-
Hmm. $2250 for a used 7k? What am I missing? Not that great a deal.
-
The driver over is nice...I'll have to make something for mine...WHEN I go full width.
-
..WHEN I go full width.
I like where your head's at
-
Chop top donk jeep wtf
http://atlanta.craigslist.org/nat/cto/4589576157.html
-
Now that is some urban assault.
-
i drove by that crap chop job the other day
-
I think he may be on to something with the shotgun steps //LMAO//
-
Oh yeah...
Off Grid Post
-
I'm thinking I will apply for this job. Anyone interested in being my White House press secretary? Your qualifications should be that you can live with yourself, lie with a straight face, and answer a question without actually giving an answer.
http://macon.craigslist.org/gov/4586386308.html (http://macon.craigslist.org/gov/4586386308.html)
-
Weight bench and weights with bars for sale.
GATR members $150.00
http://atlanta.craigslist.org/nat/spo/4636443091.html (http://atlanta.craigslist.org/nat/spo/4636443091.html)
[attachment deleted by admin - older than 465 days]
-
Seen this today. If I had the cash I would be all over it even if it does have a rebuilt title. Maybe someone can buy it and give me a ride in it!
http://atlanta.craigslist.org/wat/cto/4639880806.html (http://atlanta.craigslist.org/wat/cto/4639880806.html)
-
Nice find.
-
Toy for a toy
http://atlanta.craigslist.org/eat/pts/4640954613.html (http://atlanta.craigslist.org/eat/pts/4640954613.html)
-
Chop top donk jeep wtf
http://atlanta.craigslist.org/nat/cto/4589576157.html (http://atlanta.craigslist.org/nat/cto/4589576157.html)
Well that settles it... I've found my next jeep... Ha....
-
I saw that thing on the road the other day! Those shotgun steps are BA!
-
Seen this today. If I had the cash I would be all over it even if it does have a rebuilt title. Maybe someone can buy it and give me a ride in it!
http://atlanta.craigslist.org/wat/cto/4639880806.html (http://atlanta.craigslist.org/wat/cto/4639880806.html)
I think I know who owns this... Know of them at least.
-
I can't wrap my head around almost 18k for a salvage title 2007.
-
Chop top donk jeep wtf
http://atlanta.craigslist.org/nat/cto/4589576157.html (http://atlanta.craigslist.org/nat/cto/4589576157.html)
Well that settles it... I've found my next jeep... Ha....
I saw it in Kennesaw the other morning...It did not look any better in person than it did online.
-
I can't wrap my head around almost 18k for a salvage title 2007.
I know that is a draw back (salvage title) BUT...it does already have all the goodies on it which would cost a small fortune to replicate. I thought is was a decent deal anyway. I will admit I am not familiar enough with the Wranglers but I do see all the time people wanting $10k for a 95' Wrangler. That, I can't wrap my head around...
-
Anyone need a new Hardtop with freedom panels for a 2007-2014. Seems like a great price
http://savannah.craigslist.org/pts/4625854525.html (http://savannah.craigslist.org/pts/4625854525.html)
-
Anyone need a new Hardtop with freedom panels for a 2007-2014. Seems like a great price
http://savannah.craigslist.org/pts/4625854525.html (http://savannah.craigslist.org/pts/4625854525.html)
Has cracks and missing rear window
-
If the wife would ok this, if I had the extra coin, if the jeep would fit...damn
http://atlanta.en.craigslist.org/nat/clo/4663468813.html
-
From another forum
2001 Jeep Tj, coilovers, Tons, 40's
http://www.hardlinecrawlers.com/forums/index.php?topic=34215.0
2001 Jeep Tj, coilovers, Tons, 40's
-
Sharp TJ. Pretty standard one ton build.
-
From another forum
2001 Jeep Tj, coilovers, Tons, 40's
http://www.hardlinecrawlers.com/forums/index.php?topic=34215.0
2001 Jeep Tj, coilovers, Tons, 40's
Yep have seen that.... lot of value there. Would not take much to make it look like Dannys...
-
BUT you would be part of the WJM...
-
BUT you would be part of the WJM...
It's worth the asking price for that alone!
Sent from my iPhone using Tapatalk
-
✊ TJ Mafia
-
That is a sweet ride, sweet deal.
-
Damn, I wonder how much rust is hidden... A 10 hour trip wouldn't be too bad...right.
-
BUT you would be part of the WJM...
It's not that easy
-
I doubt there rust. 101" wb on 40 is on the short side though.
-
For you guys looking for a TJ, well this is an LJ.
http://www.hardlinecrawlers.com/forums/index.php?topic=35991.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=35991.0)
-
Another LJ
http://www.hardlinecrawlers.com/forums/index.php?topic=35791.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=35791.0)
-
That last one is really nice.
-
Near my house in Kennesaw.
(http://tapatalk.imageshack.com/v2/14/10/01/9b8a233d1e95b0917af262cd9755634c.jpg)
(http://tapatalk.imageshack.com/v2/14/10/01/03a8baf2ebdd7c854319fa8f02353596.jpg)
-
Rebuilt Title.
http://www.hardlinecrawlers.com/forums/index.php?topic=36131.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=36131.0)
-
Ok, I don't know what is meant by a rebuilt title. Does it mean it was flooded, burned, killed someone, isn't registerable with some states??? What is the real impact of a rebuilt title?
-
Ok, I don't know what is meant by a rebuilt title. Does it mean it was flooded, burned, killed someone, isn't registerable with some states??? What is the real impact of a rebuilt title?
The add didn't say what happened to it. Guess it depends on what state it coming from and what state it is going to.
-
A rebuilt title is where a vehicle was totaled then repaired. After you fix it and have it inspected the title will say rebuilt. I had to do that with my last YJ. I bought it totaled. I'd guess that LJ was hit in the back since its stock with full rear corner armor. They probably did that to cover up the bad tub.
-
2004 LJ
http://atlanta.craigslist.org/nat/cto/4702411386.html
-
3.5" Rock Krawler lift for 07-15 (says the ad) New in box for $1300.00. says it retails for $2k or so
http://jacksonville.craigslist.org/pts/4711331769.html (http://jacksonville.craigslist.org/pts/4711331769.html)
-
Damn good deal on JK shocks
http://www.jkowners.com/forum/showthread.php?t=224897
-
Waggy 44
If I had a TJ Id be looking into this.
http://www.hardlinecrawlers.com/forums/index.php?topic=36771 (http://www.hardlinecrawlers.com/forums/index.php?topic=36771)
-
Little high for just the axle, IMO. I'd like to narrow a Ford 44, but I also like to work harder than I need to. Lol
-
94 Jeep Wrangler Hard top $350.00
http://savannah.craigslist.org/pts/4747324361.html (http://savannah.craigslist.org/pts/4747324361.html)
-
damn good deal here... //LMAO// //LMAO// //LMAO//
http://columbus.craigslist.org/cto/4751618256.html (http://columbus.craigslist.org/cto/4751618256.html)
-
He needs to be put in an insane asylum.
Oops I meant he needs to put it in a museum.
-
Read $7k at first and thought I'd pass it on
-
But, it has a SkyJacker lift ......
-
Damn, already deleted
-
37x12.5x17 Goodyear MT/R Kevlar Tire BRAND NEW TIRE $275
http://atlanta.craigslist.org/atl/pts/4701895008.html
-
Where did you find 345?
-
http://atlanta.craigslist.org/atl/cto/4774691473.html
-
http://atlanta.craigslist.org/sat/pts/4790482038.html (http://atlanta.craigslist.org/sat/pts/4790482038.html)
-
http://atlanta.craigslist.org/sat/pts/4790482038.html (http://atlanta.craigslist.org/sat/pts/4790482038.html)
A STEAL FOR THOSE WHEELS! SOMEBODY JUMP ON THIS!
-
damn I would if not committed to buying the roll cage
-
looks like a good deal to me:
GearWrench 9416 16 Piece Metric Ratcheting Wrench Set
$109.99
16-piece metric wrench set with molded wrench rack and the following sizes of wrenches:8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, and 24mm
http://www.woot.com/offers/gearwrench-16-piece-metric-ratcheting-wrench-set-2?ref=cnt_wp_1_17 (http://www.woot.com/offers/gearwrench-16-piece-metric-ratcheting-wrench-set-2?ref=cnt_wp_1_17)
-
Nice!
http://atlanta.craigslist.org/nat/cto/4799780655.html (http://atlanta.craigslist.org/nat/cto/4799780655.html)
(http://images.craigslist.org/01010_4JjB29TzBL9_600x450.jpg)
-
I want that trailer. In black of course....
-
http://sport.woot.com/offers/yukon-outfitters-hammocks-1?ref=gh_sp_6_d_ph (http://sport.woot.com/offers/yukon-outfitters-hammocks-1?ref=gh_sp_6_d_ph)
-
http://sport.woot.com/offers/yukon-outfitters-hammocks-1?ref=gh_sp_6_d_ph (http://sport.woot.com/offers/yukon-outfitters-hammocks-1?ref=gh_sp_6_d_ph)
Maximize the desk job tab. Almost enough reason right there to buy this.
-
http://www.4wheelparts.com/day7?utm_campaign=2014-12-11_promo&utm_medium=email&utm_source=cheetah&utm_content=day7 (http://www.4wheelparts.com/day7?utm_campaign=2014-12-11_promo&utm_medium=email&utm_source=cheetah&utm_content=day7)
-
Nice!
http://atlanta.craigslist.org/nat/cto/4799780655.html (http://atlanta.craigslist.org/nat/cto/4799780655.html)
(http://images.craigslist.org/01010_4JjB29TzBL9_600x450.jpg)
That's Awesome! Would love that in Automatic.
-
Auto doesn't matter on a show car
-
http://sport.woot.com/offers/yukon-outfitters-hammocks-1?ref=gh_sp_6_d_ph (http://sport.woot.com/offers/yukon-outfitters-hammocks-1?ref=gh_sp_6_d_ph)
Just bought one
-
Fenix PD32 Compact 315 Lumen LED Flashlight - http://slickdeals.net/share/iphone_app/fp/139522
Edit: never mind, just heard they are out of stock now
-
I've becomes a slickdeals.net junkie
Mr heater on Amazon for $70
http://slickdeals.net/?sdtrk=iphone&sdfib=1&api_key_id=4860918&%25%25INJECT_AB_NFO%25%25sdtid=7506528&sdfid=9&sdfib=1&lno=1&trd=http+www+amazon+com+gp+product+U&u2=http%3A%2F%2Fwww.amazon.com%2Fgp%2Fproduct%2FB002G51BZU%2Fref%3Dod_aui_detailpages00%3Fie%3DUTF8%26amp%3Bpsc%3D1
That link may be a pain, but here is a screenshot(http://tapatalk.imageshack.com/v2/14/12/13/358bd336e29191849638136b79cc51df.jpg)
-
Ruff stuff 20% off code through 1/1 .... YEAREND
-
Wonder how many miles
http://atlanta.craigslist.org/sat/snw/4819507120.html (http://atlanta.craigslist.org/sat/snw/4819507120.html)
-
Good deal?
http://atlanta.craigslist.org/nat/tls/4842608238.html
-
my take, your getting the accessories about for free.
tanks are only good for so long, might be empty...
-
my take, your getting the accessories about for free.
tanks are only good for so long, might be empty...
We'll find out, meeting the guy today to make the deal. Then Tony and i are starting our lawn art business
-
5.3L LS with <10K miles on it, includes computer. Seems like a deal, if everything is true...is it a deal?
http://www.hardlinecrawlers.com/forums/index.php?topic=38679.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=38679.0)
-
5.3L LS with <10K miles on it, includes computer. Seems like a deal, if everything is true...is it a deal?
http://www.hardlinecrawlers.com/forums/index.php?topic=38679.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=38679.0)
I'm pretty sure that's a good deal. I thought they ran around 4-5k. Swap would cost around $10k on top for wiring harness and labor if I remember correctly
-
That is a low mile one. I will buy if you don't and it works in my tahoe. But i don't think it does. 04 to 11. Most are 100k and about $900.
-
5.3L LS with <10K miles on it, includes computer. Seems like a deal, if everything is true...is it a deal?
http://www.hardlinecrawlers.com/forums/index.php?topic=38679.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=38679.0)
@adamgiddens @PHANTOM
Dies this work in my tahoe?
-
That is a low mile one. I will buy if you don't and it works in my tahoe. But i don't think it does. 04 to 11. Most are 100k and about $900.
I'm not getting it...I was thinking some guy who just went to 42s would! I know an ls is in his future...I'm just trying to help.
- Torg
-
That is a low mile one. I will buy if you don't and it works in my tahoe. But i don't think it does. 04 to 11. Most are 100k and about $900.
what year is your Tahoe? That's an 11 engine.
- Torg
-
04 5.3.
You have dibs.
-
No dibs for me...take it before John does! That's a joke...John isn't looking for an ls...yet ;)
- Torg
-
Tony might get it. Dibs on his ripp
-
No LS for me just yet. Maybe in a couple years.
-
Tony might get it. Dibs on his ripp
Its a fair deal but not a smoking deal. Just my opinion. I wish it had a trans with it though, that might make it a little more tasty to try and jump on
-
Tony might get it. Dibs on his ripp
Its a fair deal but not a smoking deal. Just my opinion. I wish it had a trans with it though, that might make it a little more tasty to try and jump on
Those deals are out there... Adam at Allsouth just looked for one for me, has the connections, give him a call.
-
5.3L LS with <10K miles on it, includes computer. Seems like a deal, if everything is true...is it a deal?
http://www.hardlinecrawlers.com/forums/index.php?topic=38679.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=38679.0)
I'm pretty sure that's a good deal. I thought they ran around 4-5k. Swap would cost around $10k on top for wiring harness and labor if I remember correctly
Not even close to 10k. I bout my 6.2 for 2900 without a computer.
-
5.3L LS with <10K miles on it, includes computer. Seems like a deal, if everything is true...is it a deal?
http://www.hardlinecrawlers.com/forums/index.php?topic=38679.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=38679.0)
I'm pretty sure that's a good deal. I thought they ran around 4-5k. Swap would cost around $10k on top for wiring harness and labor if I remember correctly
Not even close to 10k. I bout my 6.2 for 2900 without a computer.
He's talking about a JK motor swap. Wire harness is expensive to integrate new motor and trans with the JK computer.
-
5.3L LS with <10K miles on it, includes computer. Seems like a deal, if everything is true...is it a deal?
http://www.hardlinecrawlers.com/forums/index.php?topic=38679.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=38679.0)
I'm pretty sure that's a good deal. I thought they ran around 4-5k. Swap would cost around $10k on top for wiring harness and labor if I remember correctly
Not even close to 10k. I bout my 6.2 for 2900 without a computer.
He's talking about a JK motor swap. Wire harness is expensive to integrate new motor and trans with the JK computer.
Yep. I'd pay $2900 today for a 6.2 installed
-
5.3L LS with <10K miles on it, includes computer. Seems like a deal, if everything is true...is it a deal?
http://www.hardlinecrawlers.com/forums/index.php?topic=38679.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=38679.0)
I'm pretty sure that's a good deal. I thought they ran around 4-5k. Swap would cost around $10k on top for wiring harness and labor if I remember correctly
Not even close to 10k. I bout my 6.2 for 2900 without a computer.
He's talking about a JK motor swap. Wire harness is expensive to integrate new motor and trans with the JK computer.
Yep. I'd pay $2900 today for a 6.2 installed
Not installed, just the engine
-
Not installed, just the engine
Gotcha. Hopefully it all gets cheaper in the next few years. I won't be ready for a while
-
Just going to leave this here......
http://greenville.craigslist.org/cto/4873539071.html (http://greenville.craigslist.org/cto/4873539071.html)
-
Just going to leave this here......
http://greenville.craigslist.org/cto/4873539071.html (http://greenville.craigslist.org/cto/4873539071.html)
he had that up a few months ago I am pretty sure. I remember because I honestly wanted to go checkout the rear leaf spring set up just for kicks but never did.
-
Just going to leave this here......
http://greenville.craigslist.org/cto/4873539071.html (http://greenville.craigslist.org/cto/4873539071.html)
lol, that axle looks so small with those tires
-
Thats a discount for sure
-
http://atlanta.craigslist.org/wat/cto/4847877345.html (http://atlanta.craigslist.org/wat/cto/4847877345.html) //SLAMIN// //SLAMIN// //SLAMIN// //SLAMIN//
-
http://atlanta.craigslist.org/wat/cto/4847877345.html (http://atlanta.craigslist.org/wat/cto/4847877345.html) //SLAMIN// //SLAMIN// //SLAMIN// //SLAMIN//
//drool//
-
Get it!!
-
http://atlanta.craigslist.org/atl/cto/4891309233.html (http://atlanta.craigslist.org/atl/cto/4891309233.html)
-
http://atlanta.craigslist.org/atl/cto/4891309233.html (http://atlanta.craigslist.org/atl/cto/4891309233.html)
Some conflicting information on that ad. 08 or 07? How many miles?
- Torg
-
From my experience people don't list the miles because it would be a potential deal breaker. If I see that, I usually just move along.
-
got to be kidding me....
http://www.ebay.com/itm/Jeep-Wrangler-Unlimited-Nighthawk-Edition-Jeep-Wrangler-Unlimited-Starwood-Custom-Nighthawk-4x4-SUV-/181681209911?forcerrptr=true&hash=item2a4d0b4237&item=181681209911&pt=US_Cars_Trucks (http://www.ebay.com/itm/Jeep-Wrangler-Unlimited-Nighthawk-Edition-Jeep-Wrangler-Unlimited-Starwood-Custom-Nighthawk-4x4-SUV-/181681209911?forcerrptr=true&hash=item2a4d0b4237&item=181681209911&pt=US_Cars_Trucks)
all that and its still got a 30 under the front.
-
got to be kidding me....
http://www.ebay.com/itm/Jeep-Wrangler-Unlimited-Nighthawk-Edition-Jeep-Wrangler-Unlimited-Starwood-Custom-Nighthawk-4x4-SUV-/181681209911?forcerrptr=true&hash=item2a4d0b4237&item=181681209911&pt=US_Cars_Trucks (http://www.ebay.com/itm/Jeep-Wrangler-Unlimited-Nighthawk-Edition-Jeep-Wrangler-Unlimited-Starwood-Custom-Nighthawk-4x4-SUV-/181681209911?forcerrptr=true&hash=item2a4d0b4237&item=181681209911&pt=US_Cars_Trucks)
all that and its still got a 30 under the front.
but FREE SHIPPING!!!
-
got to be kidding me....
http://www.ebay.com/itm/Jeep-Wrangler-Unlimited-Nighthawk-Edition-Jeep-Wrangler-Unlimited-Starwood-Custom-Nighthawk-4x4-SUV-/181681209911?forcerrptr=true&hash=item2a4d0b4237&item=181681209911&pt=US_Cars_Trucks (http://www.ebay.com/itm/Jeep-Wrangler-Unlimited-Nighthawk-Edition-Jeep-Wrangler-Unlimited-Starwood-Custom-Nighthawk-4x4-SUV-/181681209911?forcerrptr=true&hash=item2a4d0b4237&item=181681209911&pt=US_Cars_Trucks)
all that and its still got a 30 under the front.
What a waste. If I was investing that much money in a Jeep, it would look nowhere near that.
-
got to be kidding me....
http://www.ebay.com/itm/Jeep-Wrangler-Unlimited-Nighthawk-Edition-Jeep-Wrangler-Unlimited-Starwood-Custom-Nighthawk-4x4-SUV-/181681209911?forcerrptr=true&hash=item2a4d0b4237&item=181681209911&pt=US_Cars_Trucks (http://www.ebay.com/itm/Jeep-Wrangler-Unlimited-Nighthawk-Edition-Jeep-Wrangler-Unlimited-Starwood-Custom-Nighthawk-4x4-SUV-/181681209911?forcerrptr=true&hash=item2a4d0b4237&item=181681209911&pt=US_Cars_Trucks)
all that and its still got a 30 under the front.
What a waste. If I was investing that much money in a Jeep, it would look nowhere near that.
You could build two or three more capable, nicer jeeps.
-
Check out this find! I bet this guy is a real tool... //;D//
http://www.ebay.com/itm/141591434662?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT (http://www.ebay.com/itm/141591434662?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT)
-
Check out this find! I bet this guy is a real tool... //;D//
http://www.ebay.com/itm/141591434662?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT (http://www.ebay.com/itm/141591434662?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT)
@PyratM has 3 bids already... this could get interesting!
-
Check out this find! I bet this guy is a real tool... //;D//
http://www.ebay.com/itm/141591434662?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT (http://www.ebay.com/itm/141591434662?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT)
@PyratM has 3 bids already... this could get interesting!
Very kewl!
-
Who doesn't love a propane fueled Suzuki Samurai
http://atlanta.craigslist.org/eat/snw/4872976952.html (http://atlanta.craigslist.org/eat/snw/4872976952.html)
-
For anyone that needs a tow rig...Demon Super Truck F-650 MUST SEE!!
http://atlanta.craigslist.org/atl/cto/4876917844.html
-
For anyone that needs a tow rig...Demon Super Truck F-650 MUST SEE!!
http://atlanta.craigslist.org/atl/cto/4876917844.html (http://atlanta.craigslist.org/atl/cto/4876917844.html)
That's badass.
-
Damn...Ford base with Cummins engine, and Allison tranny...nice package.
- Torg
-
Damn...Ford base with Cummins engine, and Allison tranny...nice package.
That's what she said.
sorry couldn't resist. Carry on. :-)
- Torg
-
Is this a good deal for a BGE?: It's a large egg. Having sometime think about it. The egg table (cypress), egg, tools & pizza/pie insert.
I'm thinking $500
- Torg
-
Is this a good deal for a BGE?: It's a large egg. Having sometime think about it. The egg table (cypress), egg, tools & pizza/pie insert.
I'm thinking $500
- Torg
Link? Or just in general?
Your edit makes more sense. Yes, that's a good deal. If you don't want it or if you are selling, I want dibs.
-
Is this a good deal for a BGE?: It's a large egg. Having sometime think about it. The egg table (cypress), egg, tools & pizza/pie insert.
I'm thinking $500
- Torg
Link? Or just in general?
In general. A guy in my beer club is moving out of state and has asked that for his so he doesn't have to move it.
- Torg
-
Is this a good deal for a BGE?: It's a large egg. Having sometime think about it. The egg table (cypress), egg, tools & pizza/pie insert.
I'm thinking $500
- Torg
Link? Or just in general?
In general. A guy in my beer club is moving out of state and has asked that for his so he doesn't have to move it.
- Torg
I'd go get that if I were you. If not, like I said, dibs.
-
Is this a good deal for a BGE?: It's a large egg. Having sometime think about it. The egg table (cypress), egg, tools & pizza/pie insert.
I'm thinking $500
- Torg
Link? Or just in general?
In general. A guy in my beer club is moving out of state and has asked that for his so he doesn't have to move it.
- Torg
I'd go get that if I were you. If not, like I said, dibs.
send me your info...I'm going to pass on it, but I'll let him know you're interested
- Torg
-
Is this a good deal for a BGE?: It's a large egg. Having sometime think about it. The egg table (cypress), egg, tools & pizza/pie insert.
I'm thinking $500
- Torg
Link? Or just in general?
In general. A guy in my beer club is moving out of state and has asked that for his so he doesn't have to move it.
- Torg
I'd go get that if I were you. If not, like I said, dibs.
send me your info...I'm going to pass on it, but I'll let him know you're interested
- Torg
PMed
-
Jay has honed his skills to the point where he can get great Craigslist deals before they're even posted to Craigslist.... //salute//
-
Jay has honed his skills to the point where he can get great Craigslist deals before they're even posted to Craigslist.... //salute//
Lol, gotta adjust to the market.
-
DEPENDS!
I just rebuilt a medium and it was damn near as much as buying one! LOL.
Green egg parts are pricey!
I needed felt, cap, ash door, charcoal grate, stainless grate, thermometer. Still need to repaint stand.
-
Is this a good deal for a BGE?: It's a large egg. Having sometime think about it. The egg table (cypress), egg, tools & pizza/pie insert.
I'm thinking $500
- Torg
smoking deal with all the extras
-
Comanche
http://www.daveysjeeps.com/repairables/R190138.html (http://www.daveysjeeps.com/repairables/R190138.html)
Seriously considering this. Seems like a good deal. 4WD Comanches are hard to find.
-
@Doug or @jc79
2005 LJ, 4.0, 84K miles, auto, not white, $14,800
http://atlanta.craigslist.org/nat/ctd/4921231614.html (http://atlanta.craigslist.org/nat/ctd/4921231614.html)
-
saw that, not white and is my fav jeep color.
-
http://inlandempire.craigslist.org/cto/4914911416.html
-
@Doug or @jc79
2005 LJ, 4.0, 84K miles, auto, not white, $14,800
http://atlanta.craigslist.org/nat/ctd/4921231614.html (http://atlanta.craigslist.org/nat/ctd/4921231614.html)
Too rich for my plans...
-
http://inlandempire.craigslist.org/cto/4914911416.html
Too high
-
It's because of whose it is and who built it.
-
Axles to small lol
-
Is this a good deal for a BGE?: It's a large egg. Having sometime think about it. The egg table (cypress), egg, tools & pizza/pie insert.
I'm thinking $500
- Torg
smoking deal with all the extras
I never heard anything back from him.
- Torg
-
Axles to small lol
No kidding
-
It's because of whose it is and who built it.
Doesn't mention that?
John Grounds. Young guy that works at Posion Sypder.
-
Is this a good deal for a BGE?: It's a large egg. Having sometime think about it. The egg table (cypress), egg, tools & pizza/pie insert.
I'm thinking $500
- Torg
smoking deal with all the extras
I never heard anything back from him.
- Torg
No worries, keep me posted
-
reasonable deal for rubi rock rails:
http://atlanta.craigslist.org/nat/pts/4925436332.html (http://atlanta.craigslist.org/nat/pts/4925436332.html)
-
reasonable deal for rubi rock rails:
http://atlanta.craigslist.org/nat/pts/4925436332.html (http://atlanta.craigslist.org/nat/pts/4925436332.html)
I almost shared this set last night, but got side tracked. They don't look to be as nice as those, but cheap
http://atlanta.craigslist.org/sat/pts/4902505995.html
-
reasonable deal for rubi rock rails:
http://atlanta.craigslist.org/nat/pts/4925436332.html (http://atlanta.craigslist.org/nat/pts/4925436332.html)
I almost shared this set last night, but got side tracked. They don't look to be as nice as those, but cheap
http://atlanta.craigslist.org/sat/pts/4902505995.html (http://atlanta.craigslist.org/sat/pts/4902505995.html)
dudes, ive got 2 sets, brand new take offs here at the shop. take $50 ea for em, i had no idea anyone used em honestly.
-
http://ewingmotorco.com/view/10478/RED-2014-RAM-2500%20CREW%20CAB%204X4%206.7L%20CUMMINS-in-Buford-GA (http://ewingmotorco.com/view/10478/RED-2014-RAM-2500%20CREW%20CAB%204X4%206.7L%20CUMMINS-in-Buford-GA)
http://ewingmotorco.com/view/10408/BLACK-2015-Chevrolet-Silverado%203500%20LTZ%204WD-in-Buford-GA (http://ewingmotorco.com/view/10408/BLACK-2015-Chevrolet-Silverado%203500%20LTZ%204WD-in-Buford-GA)
-
2 wheel drive 4 door, "won't find another this nice"
http://atlanta.craigslist.org/sat/cto/4933831187.html (http://atlanta.craigslist.org/sat/cto/4933831187.html)
-
2 wheel drive 4 door, "won't find another this nice"
http://atlanta.craigslist.org/sat/cto/4933831187.html (http://atlanta.craigslist.org/sat/cto/4933831187.html)
I would give him 1K because the only thing worthy on that jeep are the wheels and trektop.
-
I forgot they actually made those...
-
I saw a used one at the dealer when I was looking. It was very confusing for about 20 seconds.
-
I saw a used one at the dealer when I was looking. It was very confusing for about 20 seconds.
I know. I saw one backed in to a space at Ed Voyles a few years go...lifted with 33's, but no front axle. I did a double take because for a minute I couldn't figure out what was going on
-
poor kid that opens our pool has a 4x2 jk and even worse is a florida fan
-
I've got a friend that did the conversion from 2wd to 4wd on his. I was trying to get him to post the write up here.
-
poor kid that opens our pool has a 4x2 jk and even worse is a florida fan
Is his name James?
-
poor kid that opens our pool has a 4x2 jk and even worse is a florida fan
haha
Is his name James?
-
poor kid that opens our pool has a 4x2 jk and even worse is a florida fan
Is his name James?
Don't get it. But, no
-
poor kid that opens our pool has a 4x2 jk and even worse is a florida fan
Is his name James?
Don't get it. But, no
jkristie from jeep asylum
-
poor kid that opens our pool has a 4x2 jk and even worse is a florida fan
Is his name James?
Don't get it. But, no
jkristie from jeep asylum
Ahh
-
http://atlanta.craigslist.org/atl/for/4929159576.html
-
With all the LJ talk, I was just poking around on CL. Dreaming of what could be one day...
$17K: http://atlanta.craigslist.org/atl/cto/4940537960.html (http://atlanta.craigslist.org/atl/cto/4940537960.html)
Cummins diesel? http://macon.craigslist.org/cto/4941916149.html (http://macon.craigslist.org/cto/4941916149.html)
-
Wow the yellow I think is a decent deal.
-
Yes please!
http://atlanta.craigslist.org/nat/cto/4876278997.html (http://atlanta.craigslist.org/nat/cto/4876278997.html)
(http://images.craigslist.org/00V0V_5T0GYVSlpRj_600x450.jpg)
-
Yes please!
http://atlanta.craigslist.org/nat/cto/4876278997.html (http://atlanta.craigslist.org/nat/cto/4876278997.html)
(http://images.craigslist.org/00V0V_5T0GYVSlpRj_600x450.jpg)
there is something that looks like this for sale off Highway 52 in Ellijay. Been for sale for a while now.
Sent from my iPhone using Tapatalk
-
http://atlanta.craigslist.org/sat/cto/4933986513.html Tj 5.3 swap
Sent from my iPhone using Tapatalk
-
not a bad buy, it would cost that much for the novac parts, hmmmmm
-
Kind of an odd build. The jeep isn't built to hold a v8. Tcase, axles, suspension, tires, and interior look to be almost stock-ish. Maybe a front end impact. He had to replace front bumper, fenders, and motor.
Still a killer deal. Just plan on replacing axles and tcase soon.
-
I'm calling it quits. There will be axles bolted under the blue XJ.
http://atlanta.craigslist.org/nat/cto/4955097556.html (http://atlanta.craigslist.org/nat/cto/4955097556.html)
-
I'm calling it quits. There will be axles bolted under the blue XJ.
http://atlanta.craigslist.org/nat/cto/4955097556.html (http://atlanta.craigslist.org/nat/cto/4955097556.html)
Big Dave what do you mean quits? No more Jeeps?
Sent from my iPhone using Tapatalk
-
Yes. For awhile.
-
@Raisinhead
Moab Brewery EJS 2014 Shirt DEAL if you wear S, M, or L.
http://rchdesigns.storenvy.com/collections/22992-all-products/products/5682505-2014-moab-diner-ejs-t-shirt (http://rchdesigns.storenvy.com/collections/22992-all-products/products/5682505-2014-moab-diner-ejs-t-shirt)
-
This is up here in ELLIJAY. I can't remember exactly 2005 or 2006 Automatic LJ Rubicon with soft top. 84,000 miles totally stock
$18,000. I can get more info if needed
-
@Raisinhead
Moab Brewery EJS 2014 Shirt DEAL if you wear S, M, or L.
http://rchdesigns.storenvy.com/collections/22992-all-products/products/5682505-2014-moab-diner-ejs-t-shirt (http://rchdesigns.storenvy.com/collections/22992-all-products/products/5682505-2014-moab-diner-ejs-t-shirt)
Why, @rasinhead?? Haha. Grab me a large
-
I thought you said "i want a shirt!" the other day. Maybe it was carrottop.
-
http://m.ebay.com/itm/201331387010?_mwBanner=1
-
Nice features
http://atlanta.craigslist.org/atl/cto/4978739277.html
-
http://m.ebay.com/itm/201331387010?_mwBanner=1
Very impressive!
-
Nice to see one for a decent price with aftermarket axles for once. Not a "built jk on 40s, stock sport axles, and 4000 lights"
-
That red looks killer
-
Want!
(http://images.tapatalk-cdn.com/15/04/15/1c5fdb32e18ee7503f66b433ec775e4e.jpg)
(http://images.tapatalk-cdn.com/15/04/15/2db3fd36ecbd8b895a9c3899f1f5f8ec.jpg)
(http://images.tapatalk-cdn.com/15/04/15/3cd9798c94ac7a795d3c212ef2020dc3.jpg)
-
http://atlanta.craigslist.org/atl/cto/4979736987.html
-
http://atlanta.craigslist.org/atl/cto/4979736987.html
Someone could buy that and have it paid for with 3-4 trips to Moab towing somebody else's rig for $$$.
Sent from my iPhone using Tapatalk
-
http://atlanta.craigslist.org/atl/cto/4979736987.html
I think I see Doug's future camper in the background.
I'd love to have it...Just no where to park it.
- Torg
-
http://atlanta.craigslist.org/atl/cto/4979736987.html (http://atlanta.craigslist.org/atl/cto/4979736987.html)
I think I see Doug's future camper in the background.
I'd love to have it...Just no where to park it.
- Torg
Nice find, didn't even notice the camper.
The driveway is for parking yo stuff.
-
http://atlanta.craigslist.org/atl/cto/4979736987.html (http://atlanta.craigslist.org/atl/cto/4979736987.html)
I think I see Doug's future camper in the background.
I'd love to have it...Just no where to park it.
- Torg
Nice find, didn't even notice the camper.
The driveway is for parking yo stuff.
I wrote it wrong...I don't have the room to turn that thing around and get it positioned in my yard.
- Torg
-
http://www.rustysoffroad.com/mastercraft-nomad-seat-sale.html (http://www.rustysoffroad.com/mastercraft-nomad-seat-sale.html)
-
Get it
(http://images.tapatalk-cdn.com/15/06/02/1d88ceab5f784b7551793dd69432189a.jpg)
-
http://atlanta.craigslist.org/nat/bar/5040137935.html (http://atlanta.craigslist.org/nat/bar/5040137935.html)
(http://images.craigslist.org/01616_8ZrfGbVfKiB_600x450.jpg)
-
//LMAO// //LMAO// //LMAO//
http://atlanta.craigslist.org/wat/bar/5053831036.html (http://atlanta.craigslist.org/wat/bar/5053831036.html)
-
//WTF//
-
LJ HARDTOP
http://atlanta.craigslist.org/nat/pts/5060706226.html
-
LJ HARDTOP
http://atlanta.craigslist.org/nat/pts/5060706226.html (http://atlanta.craigslist.org/nat/pts/5060706226.html)
Damn, I'm to late. It's been deleted.
-
//LMAO// //LMAO// //LMAO//
http://atlanta.craigslist.org/wat/bar/5053831036.html (http://atlanta.craigslist.org/wat/bar/5053831036.html)
I can only imagine your thought when you saw trail buggy for $4500 and then clicked that link!
-
A couple LJ's...both with rebuilt titles.
http://atlanta.craigslist.org/atl/cto/5017592436.html (http://atlanta.craigslist.org/atl/cto/5017592436.html)
http://atlanta.craigslist.org/atl/cto/5025908743.html (http://atlanta.craigslist.org/atl/cto/5025908743.html)
-
Prefect trailer for JEEPs
(http://images.tapatalk-cdn.com/15/06/09/9b492420d88903e7ed07da96c0c54d47.jpg)
-
That is damn nice! You could put a pop up camper on the front too. That would be killer!
-
That is damn nice! You could put a pop up camper on the front too. That would be killer!
Awesome!! Shotgun for moab!!! Thanks Danny.
-
Best deal" a 10 ton I've ever seen
-
Ever wanted a RHD Jeep? http://atlanta.craigslist.org/atl/cto/5051546666.html (http://atlanta.craigslist.org/atl/cto/5051546666.html)
-
73 land rover diesel pickup.
http://atlanta.craigslist.org/eat/cto/5049644057.html
-
https://atlanta.craigslist.org/nat/pts/5079327054.html
-
https://atlanta.craigslist.org/nat/pts/5079327054.html
I have seen those for sale on another forum. Are you familiar with the 505 Performance brand?
-
I have seen those for sale on another forum. Are you familiar with the 505 Performance brand?
I am familiar with 505. They had a questionable rep in the early years, but they seemed to have turned around and do good stuff these days. Could have been growing pains? I would do some research on the headers if I was in your shoes. Did anything ever happen with the seats I sent you the text about?
-
I have seen those for sale on another forum. Are you familiar with the 505 Performance brand?
I am familiar with 505. They had a questionable rep in the early years, but they seemed to have turned around and do good stuff these days. Could have been growing pains? I would do some research on the headers if I was in your shoes. Did anything ever happen with the seats I sent you the text about?
I talked to the guy about the seats but they were for a 2 door and he wanted to trade all the seats; front and rear...my rear seat won't go in his. Didn't work out
-
09 241or tcase
$900
Location Dalton, Ga.
David Lomax
7062806547
The guy just put in a 5.3/trans/tcase in his jeep.
-
09 241or tcase
$900
Location Dalton, Ga.
David Lomax
7062806547
The guy just put in a 5.3/trans/tcase in his jeep.
DEAL!!!
@jgerhard
@cru9
@Metro
@Raisinhead
-
Just blew my wad on steering box and upgrades (worthwhile though), dang it. This is the 2nd one I'm gonna miss!
-
09 241or tcase
$900
Location Dalton, Ga.
David Lomax
7062806547
The guy just put in a 5.3/trans/tcase in his jeep.
DEAL!!!
@jgerhard
@cru9
@Metro
@Raisinhead
Unless Metro blew his up, he has a 241
-
09 241or tcase
$900
Location Dalton, Ga.
David Lomax
7062806547
The guy just put in a 5.3/trans/tcase in his jeep.
DEAL!!!
@jgerhard
@cru9
@Metro
@Raisinhead
Unless Metro blew his up, he has a 241
Doug should probably pick it up as a spare the way he beats on his rig.
-
Yup, I want it. Too bad there are too many other things on my list.
-
Yep trashing it lately.
-
Allsouth needs to buy it and hold it for ya
-
Allsouth needs to buy it and hold it for ya
Cage first. More deals will come up.
-
You guys crack me up...a deal comes up for less than a grand and you won't rob the bank for it. You can liquidate it easily if stuff hits the fan!
- Torg
-
My Jeep is falling apart faster than I can put up grades on so I am not wasting my money. I am thinking about buying another prius.
-
I had hoped you guys would buy this thing up. I don't need to put a 241or in the XJ..........
-
PM Sent.
-
PM Sent.
Returned.
-
PM Sent.
it's for a JK, just sayin
Does it matter Auto or Manual?
-
PM Sent.
it's for a JK, just sayin
It will physically bolt up to any 23 spline transmission that came in a tj, xj, wj,zj. You will have to figure out a way to may your speedo work, the jk 241OR doesn't have a speed sensor in the tcase.
-
PM Sent.
it's for a JK, just sayin
Yeah, I'm tracking. It's for a project. If it won't work I'll sell it. Thanks though!
-
Need a CB? http://atlanta.craigslist.org/atl/tls/5125572423.html (http://atlanta.craigslist.org/atl/tls/5125572423.html)
last pic
-
Metal Cloak - Lift kit parts - Jeep JK :
http://atlanta.craigslist.org/nat/pts/5126030550.html (http://atlanta.craigslist.org/nat/pts/5126030550.html)
JEEP JK ADJUSTABLE CONTROL ARMS (FRONT-UPPER)
http://atlanta.craigslist.org/nat/pts/5126002719.html (http://atlanta.craigslist.org/nat/pts/5126002719.html)
Jeep JK - Heavy Duty Cable Shifter Upgrade
http://atlanta.craigslist.org/nat/pts/5125994856.html (http://atlanta.craigslist.org/nat/pts/5125994856.html)
Rugged Ridge : XHD Winch Mount Bumper : 07-15 JK
http://atlanta.craigslist.org/nat/pts/5125981291.html (http://atlanta.craigslist.org/nat/pts/5125981291.html)
Yukon GEARS & LOCKER - OVERSTOCK
http://atlanta.craigslist.org/nat/pts/5125929171.html (http://atlanta.craigslist.org/nat/pts/5125929171.html)
GenRight : Pre-Runner Jeep Tire Carrier
http://atlanta.craigslist.org/nat/pts/5125943241.html (http://atlanta.craigslist.org/nat/pts/5125943241.html)
Ten Factory Axle Shafts MG22152
http://atlanta.craigslist.org/nat/pts/5125881601.html (http://atlanta.craigslist.org/nat/pts/5125881601.html)
35x12.50 R17 : Cooper STT
http://atlanta.craigslist.org/nat/pts/5125858877.html (http://atlanta.craigslist.org/nat/pts/5125858877.html)
33x12.50 R20 Toyo Open Country MT
http://atlanta.craigslist.org/nat/pts/5125565124.html (http://atlanta.craigslist.org/nat/pts/5125565124.html)
35x12.50 R17 Nitto Trail Grappler's
http://atlanta.craigslist.org/nat/pts/5125572578.html (http://atlanta.craigslist.org/nat/pts/5125572578.html)
37x13.50 R20 Toyo Open Country MT
http://atlanta.craigslist.org/nat/pts/5125560114.html (http://atlanta.craigslist.org/nat/pts/5125560114.html)
Poison Spyder armor - Jeep Wrangler LJ
http://atlanta.craigslist.org/nat/pts/5053667769.html (http://atlanta.craigslist.org/nat/pts/5053667769.html)
-
Metal Cloak - Lift kit parts - Jeep JK :
http://atlanta.craigslist.org/nat/pts/5126030550.html (http://atlanta.craigslist.org/nat/pts/5126030550.html)
JEEP JK ADJUSTABLE CONTROL ARMS (FRONT-UPPER)
http://atlanta.craigslist.org/nat/pts/5126002719.html (http://atlanta.craigslist.org/nat/pts/5126002719.html)
Jeep JK - Heavy Duty Cable Shifter Upgrade
http://atlanta.craigslist.org/nat/pts/5125994856.html (http://atlanta.craigslist.org/nat/pts/5125994856.html)
Rugged Ridge : XHD Winch Mount Bumper : 07-15 JK
http://atlanta.craigslist.org/nat/pts/5125981291.html (http://atlanta.craigslist.org/nat/pts/5125981291.html)
Yukon GEARS & LOCKER - OVERSTOCK
http://atlanta.craigslist.org/nat/pts/5125929171.html (http://atlanta.craigslist.org/nat/pts/5125929171.html)
GenRight : Pre-Runner Jeep Tire Carrier
http://atlanta.craigslist.org/nat/pts/5125943241.html (http://atlanta.craigslist.org/nat/pts/5125943241.html)
Ten Factory Axle Shafts MG22152
http://atlanta.craigslist.org/nat/pts/5125881601.html (http://atlanta.craigslist.org/nat/pts/5125881601.html)
35x12.50 R17 : Cooper STT
http://atlanta.craigslist.org/nat/pts/5125858877.html (http://atlanta.craigslist.org/nat/pts/5125858877.html)
33x12.50 R20 Toyo Open Country MT
http://atlanta.craigslist.org/nat/pts/5125565124.html (http://atlanta.craigslist.org/nat/pts/5125565124.html)
35x12.50 R17 Nitto Trail Grappler's
http://atlanta.craigslist.org/nat/pts/5125572578.html (http://atlanta.craigslist.org/nat/pts/5125572578.html)
37x13.50 R20 Toyo Open Country MT
http://atlanta.craigslist.org/nat/pts/5125560114.html (http://atlanta.craigslist.org/nat/pts/5125560114.html)
Poison Spyder armor - Jeep Wrangler LJ
http://atlanta.craigslist.org/nat/pts/5053667769.html (http://atlanta.craigslist.org/nat/pts/5053667769.html)
Lots of good deals right here!
-
04 LJ 10.4k
http://atlanta.craigslist.org/nat/cto/5140568497.html (http://atlanta.craigslist.org/nat/cto/5140568497.html)
Looks like someone is searching for LJ's!
Sent from my iPhone using Tapatalk
-
These are down to 1700 now
(http://images.tapatalk-cdn.com/15/08/04/9bd4b93272738d24e405e8b3277b46c4.jpg)
-
These are down to 1700 now
(http://images.tapatalk-cdn.com/15/08/04/9bd4b93272738d24e405e8b3277b46c4.jpg)
Good deal then if they are 99%
-
One ride, very nice. Somebody ought to grab them
-
One ride, very nice. Somebody ought to grab them
Working on it.
-
One ride, very nice. Somebody ought to grab them
Working on it.
'Atta boy, Carl!
-
If you don't my willpower might not last much longer. Been torn between these 39" red labels or some 40" Mtrs on hardline.
http://www.hardlinecrawlers.com/forums/index.php?topic=42169.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=42169.0)
I don't need them yet and am thinking I want to go 42s(Mtrs or pbr rocker radials) but both look like good deals.
Don't go bigger than 40's on a 4 door JK
-
If you don't my willpower might not last much longer. Been torn between these 39" red labels or some 40" Mtrs on hardline.
http://www.hardlinecrawlers.com/forums/index.php?topic=42169.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=42169.0)
I don't need them yet and am thinking I want to go 42s(Mtrs or pbr rocker radials) but both look like good deals.
Don't go bigger than 40's on a 4 door JK
Why not?
Sent from my iPhone using Tapatalk
-
If you don't my willpower might not last much longer. Been torn between these 39" red labels or some 40" Mtrs on hardline.
http://www.hardlinecrawlers.com/forums/index.php?topic=42169.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=42169.0)
I don't need them yet and am thinking I want to go 42s(Mtrs or pbr rocker radials) but both look like good deals.
Don't go bigger than 40's on a 4 door JK
Why not?
Sent from my iPhone using Tapatalk
To big. Not sure is you remember Matt that had the black 4 door rubi anniversary edition. He had problems with clearance.
-
Thanks. He also was running 14 bolt rear and 60 up front.
-
I want 42s
-
Grabbing them tonight...hoping I don't break stuff!
- Torg
-
Nice Clark
-
Awesome Clark!
-
Many thanks to Doug for that post..well done, sir!
- Torg
-
You can clearance 42s, just not with poison spyder rear fenders.
-
Bryan owes me a beer
-
I'll pass that along! I talked to him for a few minutes...seems like a guy to have a beer with.
- Torg
-
Many thanks to Doug for that post..well done, sir!
- Torg
Nice pick up!
-
On a 44 front, yea stuff will be broken with 39's....just wheel smart and don't bind them up.
-
Nice pick up Clark!! You're going to need a step ladder for your jeep. ; )
To big. Not sure is you remember Matt that had the black 4 door rubi anniversary edition. He had problems with clearance.
I'm curious, but what type of clearance issues were there?
-
Nice pick up Clark!! You're going to need a step ladder for your jeep. ; )
To big. Not sure is you remember Matt that had the black 4 door rubi anniversary edition. He had problems with clearance.
I'm curious, but what type of clearance issues were there?
he was having sheet metal / Fender on rear issues
-
The poison spider rear fenders are designed for 40s. Don't use them if going bigger. Custom cut corner .
-
The poison spider rear fenders are designed for 40s. Don't use them if going bigger. Custom cut corner .
I don't think Matt was running fenders until he sold it.
-
Then is just a matter of stretching and clearancing.
-
I be seen some JK's have to cut the front grill for clearance for 42's also
-
Grabbing them tonight...hoping I don't break stuff!
- Torg
Nicely done. Will we see them at Harlan?
-
Grabbing them tonight...hoping I don't break stuff!
- Torg
Nicely done. Will we see them at Harlan?
Yep, assuming they don't break something as I load the jeep on the trailer next Wednesday! Lol
- Torg
-
I saw your tires on the way to your house, Clark. Good luck!
-
I saw your tires on the way to your house, Clark. Good luck!
ha! Those look like MTR/ks
- Torg
-
http://chattanooga.craigslist.org/cto/5187187591.html
-
http://chattanooga.craigslist.org/cto/5187187591.html (http://chattanooga.craigslist.org/cto/5187187591.html)
ill sell ya one for $10k thats got a 5.3l and king coilovers.
-
Yes that one has tons too. RJ 60 front, 14b rear, is on here under for sale. I would have to rework it all so not for me.
-
Yes that one has tons too. RJ 60 front, 14b rear, is on here under for sale. I would have to rework it all so not for me.
what jeep is this? Where is the ad?
-
Yes that one has tons too. RJ 60 front, 14b rear, is on here under for sale. I would have to rework it all so not for me.
@tcdawg
what jeep is this? Where is the ad?
SOLD TO YOU TODAY?
http://www.gatrailriders.com/GTRForums/index.php?topic=14660.msg244671#msg244671 (http://www.gatrailriders.com/GTRForums/index.php?topic=14660.msg244671#msg244671)
-
Yes that one has tons too. RJ 60 front, 14b rear, is on here under for sale. I would have to rework it all so not for me.
@tcdawg
what jeep is this? Where is the ad?
SOLD TO YOU TODAY?
http://www.gatrailriders.com/GTRForums/index.php?topic=14660.msg244671#msg244671 (http://www.gatrailriders.com/GTRForums/index.php?topic=14660.msg244671#msg244671)
nope, wasnt @tcdawg was a local guy from up here, has a JK we are going to swap it all into
-
Wow
-
http://atlanta.craigslist.org/nat/pts/5181330443.html (http://atlanta.craigslist.org/nat/pts/5181330443.html)
Thoughts? I've got some questions sent to the seller.
I recall looking pretty closely at some CUCV axles. I always came back to the 4.56 gears and Detroit in the rear. I figured that i didn't want either of those, and that i'd be going back and swapping them Day 1. Which means at least $2k of work to get F/R gears and rear locker installed.
-
That's half price. Don you should jump on it or the girls college fund will be shrinking. Locker in rear sucks fit the street but damn what a deal.
-
You're unlikely to break those no matter how much you try.
-
That's half price. Don you should jump on it or the girls college fund will be shrinking. Locker in rear sucks fit the street but damn what a deal.
I NEVER notice my Detroit in the rear.. maybe once in 2k miles in the rain on a off camber dead stopped turn in situation that it might have chirped. and thatl happen in nearly anything.
-
Only downside I see might be weight gain, as JKs are a bit lacking in HP already. V8 swap would solve that.
-
I'd rather get a SD 60/10.5 & put whatever gears & locker I wanted in them. Should be tons cheaper, pun intended.
-
Would not be cheaper with same specifications as those axles. They could handle an LS3 with ease. I do hate heavy axles but ::) has what it is and light weight stuff won't hang.
-
Strong but real heavy. Lighter stuff will be just as strong but depends on your pocket book size.
-
I'd rather get a SD 60/10.5 & put whatever gears & locker I wanted in them. Should be tons cheaper, pun intended.
You're outnumbered here with that idea. Lol
-
https://atlanta.craigslist.org/atl/cto/5189884447.html
-
http://atlanta.craigslist.org/nat/pts/5181330443.html (http://atlanta.craigslist.org/nat/pts/5181330443.html)
Thoughts? I've got some questions sent to the seller.
Don did you get them?
-
https://atlanta.craigslist.org/atl/cto/5189884447.html
All that pricey top of the line stuff, and they put on a smittybilt front bumper and leave the rear stock?
-
http://bham.craigslist.org/cto/5193654458.html (http://bham.craigslist.org/cto/5193654458.html)
-
Mods, please move the above post to the Fails thread
-
Ben
http://atlanta.craigslist.org/nat/cto/5200942333.html
-
http://www.jkowners.com/forum/showthread.php?t=275482 (http://www.jkowners.com/forum/showthread.php?t=275482)
-
It's in Canada. Bet it's a rusty beast. Looks clean but.........
-
It's in Canada. Bet it's a rusty beast. Looks clean but.........
This! A buddy of mine bought a Canadian JK and has nothing but problems. RUST!!!!!
-
http://www.jkowners.com/forum/showthread.php?t=275482 (http://www.jkowners.com/forum/showthread.php?t=275482)
Cheaper than an LJ build! //popcorn//
LOL
-
http://www.jkowners.com/forum/showthread.php?t=275482 (http://www.jkowners.com/forum/showthread.php?t=275482)
Cheaper than an LJ build! //popcorn//
LOL
says who?
-
http://m.autotrader.com/cars-for-sale/vehicledetails.xhtml?listingId=403015590&zip=31024&endYear=2014&pageLayout=list&sortBy=distanceASC&startYear=2007&searchRadius=300&mmt=%5BJEEP%5BWRANGLER%5BWRANGLER%7CUnlimited+Rubicon%5D%5D%5B%5D%5D
-
http://m.autotrader.com/cars-for-sale/vehicledetails.xhtml?listingId=402602318&zip=31024&endYear=2014&pageLayout=list&sortBy=distanceASC&startYear=2007&searchRadius=300&offset=90&mmt=%5BJEEP%5BWRANGLER%5BWRANGLER%7CUnlimited+Rubicon%5D%5D%5B%5D%5D
-
http://www.rakuten.com/prod/yescomusa-12000-lb-6-6hp-12v-electric-recovery-winch-w-wireless-remote/q/sellerid/23643196/258739999.html?scid=em_Promotional_20150907Dedicated&adid=28914&rmatt=tsid:1012038 (http://www.rakuten.com/prod/yescomusa-12000-lb-6-6hp-12v-electric-recovery-winch-w-wireless-remote/q/sellerid/23643196/258739999.html?scid=em_Promotional_20150907Dedicated&adid=28914&rmatt=tsid:1012038)|cid:4438|cgid:44383068684
Anyone looking for a starter winch? It looks to be an Engo relabeled but for the price if you don't have one this one would be better than nothing at all.
-
7.3
http://atlanta.craigslist.org/atl/cto/5209464115.html (http://atlanta.craigslist.org/atl/cto/5209464115.html)
-
7.3
http://atlanta.craigslist.org/atl/cto/5209464115.html (http://atlanta.craigslist.org/atl/cto/5209464115.html)
Damn...good find
- Torg
-
It only has 265k miles. Only? LOL.
It also has the Dana 50 front.
-
http://www.rakuten.com/prod/yescomusa-12000-lb-6-6hp-12v-electric-recovery-winch-w-wireless-remote/q/sellerid/23643196/258739999.html?scid=em_Promotional_20150907Dedicated&adid=28914&rmatt=tsid:1012038 (http://www.rakuten.com/prod/yescomusa-12000-lb-6-6hp-12v-electric-recovery-winch-w-wireless-remote/q/sellerid/23643196/258739999.html?scid=em_Promotional_20150907Dedicated&adid=28914&rmatt=tsid:1012038)|cid:4438|cgid:44383068684
Anyone looking for a starter winch? It looks to be an Engo relabeled but for the price if you don't have one this one would be better than nothing at all.
Friend of mine had one. He used it once, broke it & you can't get parts to fix it.
-
It only has 265k miles. Only? LOL.
It also has the Dana 50 front.
In one of the pictures the trim is falling off the door...he actually left it hanging. Dude, use some liquid nails on that thing!
- Torg
-
It only has 265k miles. Only? LOL.
It also has the Dana 50 front.
I know, every time I see this I laugh a little. Yes at 260K it has life left in it but really, don't try to act like its a rare low mileage vehicle.
-
There are better ones out there for 9... Plenty of OBS with lower mileages and even a few 99-03's in better shape. Been a few on hardline lately. Mine only has 271k on it.
-
Well, I dreamt about 7.3l Ford trucks all night
- Torg
-
There are better ones out there for 9... Plenty of OBS with lower mileages and even a few 99-03's in better shape. Been a few on hardline lately. Mine only has 271k on it.
I don't ever see low mile crew cabs with beds clean under 9. That would be sweet.
-
http://atlanta.craigslist.org/nat/tls/5171222515.html (http://atlanta.craigslist.org/nat/tls/5171222515.html)
-
http://atlanta.craigslist.org/nat/tls/5171222515.html (http://atlanta.craigslist.org/nat/tls/5171222515.html)
Looks like an 8274. Damn good winch. That's a good price
-
http://atlanta.craigslist.org/atl/tls/5224216122.html (http://atlanta.craigslist.org/atl/tls/5224216122.html)
80 gal. compressor
-
http://atlanta.craigslist.org/atl/tls/5224216122.html (http://atlanta.craigslist.org/atl/tls/5224216122.html)
80 gal. compressor
@cru9 this is what you were looking for
-
http://atlanta.craigslist.org/atl/tls/5224216122.html (http://atlanta.craigslist.org/atl/tls/5224216122.html)
80 gal. compressor
@cru9 this is what you were looking for
Yes it is.
-
Uhm ok on the price. (http://images.tapatalk-cdn.com/15/09/16/842ccd5e8b2ec93b1c857a2a79291f69.jpg)
Sent from my SM-G860P using Tapatalk
-
Uhm ok on the price. (http://images.tapatalk-cdn.com/15/09/16/842ccd5e8b2ec93b1c857a2a79291f69.jpg)
Sent from my SM-G860P using Tapatalk
@tcdawg the price just went up on mine... //LMAO//
-
Wow 1 ton rubi auto LJ w 34k miles for$22!
https://www.rockcrawlersforsale.com/autos/jeep/one-ton-lj-378.html
-
Wow 1 ton rubi auto LJ w 34k miles for$22!
https://www.rockcrawlersforsale.com/autos/jeep/one-ton-lj-378.html
Damn...Doug, pull the trigger
- Torg
-
Wow 1 ton rubi auto LJ w 34k miles for$22!
https://www.rockcrawlersforsale.com/autos/jeep/one-ton-lj-378.html
Damn...Doug, pull the trigger
- Torg
I'm out of bullets
-
Just don't let anyone that just built an LJ see it
-
Wow 1 ton rubi auto LJ w 34k miles for$22!
https://www.rockcrawlersforsale.com/autos/jeep/one-ton-lj-378.html
All the jeeps that are out west are almost always a much more reasonable price. Seems like the ones in the east are ways priced full retard. I have seen stock LJ's w 100k miles listed for $22k
-
Stock LJ Rubi in FL for $15k. Was 13k and he raised it due to so much interest lol
-
Stock LJ Rubi in FL for $15k. Was 13k and he raised it due to so much interest lol
Stock ones don't float my boat. If I was to jump on one it would be built to a point.
Here is an LJ on 60's, 42,s and a Hemi 5.7 on EBay right now.
(http://images.tapatalk-cdn.com/15/09/17/a01ad8313e01aa1bdff72e2b7925cba5.jpg)
-
That's you. Even White.
-
That's you. Even White.
Looks white in that pic but it's silver like my old TJ.
Got my eye on it :) wish it was closer so I could check it out.
-
Silver is my fav
-
Silver is my fav
Mine too. It's like white w a tan :)
-
Do it!
-
Silver is my fav
Mine too. It's like white w a tan :)
White with a tan still isn't white. Js
-
Not Craigslist but a good deal...
http://gr8tops.com/shop/jeepmodels/wrangler-lj-2/rampage-lj-frameless-softop-scratch-n-dent (http://gr8tops.com/shop/jeepmodels/wrangler-lj-2/rampage-lj-frameless-softop-scratch-n-dent)
-
Not Craigslist but a good deal...
http://gr8tops.com/shop/jeepmodels/wrangler-lj-2/rampage-lj-frameless-softop-scratch-n-dent (http://gr8tops.com/shop/jeepmodels/wrangler-lj-2/rampage-lj-frameless-softop-scratch-n-dent)
Southern CJ Jeep
Jody & Dawn Abbott
678-873-4694
Kingston, Ga
Has a bunch of those Rampage LJ tops for $200
-
Wow 1 ton rubi auto LJ w 34k miles for$22!
https://www.rockcrawlersforsale.com/autos/jeep/one-ton-lj-378.html
That's an awesome deal. I did just sell my 05 Tj rubi...hmmm
-
Wow 1 ton rubi auto LJ w 34k miles for$22!
https://www.rockcrawlersforsale.com/autos/jeep/one-ton-lj-378.html (https://www.rockcrawlersforsale.com/autos/jeep/one-ton-lj-378.html)
That's an awesome deal. I did just sell my 05 Tj rubi...hmmm
DO IT John... then we start LJ mafia..
-
http://www.ksl.com/index.php?nid=218&ad=36564875&cat=402&s_cid=S0001
-
http://cars.akinsford.com/vehicle/2004/Ford/Super%20Duty%20F-250/8156945 (http://cars.akinsford.com/vehicle/2004/Ford/Super%20Duty%20F-250/8156945)
-
Don't think it's a 7.3, but it's super nice clean. Rags are bringing $10+.
-
Rockin deal on TJ lift
(http://images.tapatalk-cdn.com/15/09/21/1b4a7572bf1e19ffa482011eb222c37f.jpg)
-
Don't think it's a 7.3, but it's super nice clean. Rags are bringing $10+.
6.0
-
http://atlanta.craigslist.org/nat/pts/5220220930.html (http://atlanta.craigslist.org/nat/pts/5220220930.html)
-
MOAB TRUCK!
https://nwga.craigslist.org/cto/5199366370.html
-
Duramax Pig for $7500.
http://www.ebay.com/itm/Chevrolet-Silverado-2500-Crew-Cab-4-door-/111780651758?forcerrptr=true&hash=item1a06a562ee&item=111780651758 (http://www.ebay.com/itm/Chevrolet-Silverado-2500-Crew-Cab-4-door-/111780651758?forcerrptr=true&hash=item1a06a562ee&item=111780651758)
-
http://atlanta.craigslist.org/nat/pts/5230819126.html (http://atlanta.craigslist.org/nat/pts/5230819126.html)
-
http://atlanta.craigslist.org/nat/pts/5230819126.html (http://atlanta.craigslist.org/nat/pts/5230819126.html)
somebody hurry up and buy that Cummins...
-
http://atlanta.craigslist.org/nat/pts/5230819126.html (http://atlanta.craigslist.org/nat/pts/5230819126.html)
somebody hurry up and buy that Cummins...
Go home drunk, you're Justin.
That's an atlas
-
http://atlanta.craigslist.org/nat/pts/5230819126.html (http://atlanta.craigslist.org/nat/pts/5230819126.html)
somebody hurry up and buy that Cummins...
Go home drunk, you're Justin.
That's an atlas
For the LJ yo
Sent from my XT1254 using Tapatalk
-
http://atlanta.craigslist.org/nat/pts/5230819126.html (http://atlanta.craigslist.org/nat/pts/5230819126.html)
somebody hurry up and buy that Cummins...
Go home drunk, you're Justin.
That's an atlas
For the LJ yo
Sent from my XT1254 using Tapatalk
Ahh, buy your cummins. You are sober Justin.
-
http://atlanta.craigslist.org/nat/pts/5230819126.html (http://atlanta.craigslist.org/nat/pts/5230819126.html)
somebody hurry up and buy that Cummins...
Go home drunk, you're Justin.
That's an atlas
For the LJ yo
Sent from my XT1254 using Tapatalk
Ahh, buy your cummins. You are sober Justin.
Well not exactly
Sent from my XT1254 using Tapatalk
-
http://atlanta.craigslist.org/nat/pts/5230819126.html (http://atlanta.craigslist.org/nat/pts/5230819126.html)
somebody hurry up and buy that Cummins...
Go home drunk, you're Justin.
That's an atlas
For the LJ yo
Sent from my XT1254 using Tapatalk
Ahh, buy your cummins. You are sober Justin.
Well not exactly
Sent from my XT1254 using Tapatalk
I could have told you that...
-
Front and Rear JK Rock Jock 60's w Yukon Air Lockers
$9750.00
http://www.rwkhaussupply.com/magento/drivetrain/complete-axle-assembly/jeep-jk/jeep-jk-front-and-rear-rockjock-d60-currie-axle-assemblies.html (http://www.rwkhaussupply.com/magento/drivetrain/complete-axle-assembly/jeep-jk/jeep-jk-front-and-rear-rockjock-d60-currie-axle-assemblies.html)
-
Sorry I think that's luke warm at best
You have better?
-
Sorry I think that's luke warm at best
You have better?
Comes to over $11k when you add the lockers, powder coat and brakes. And you are still just getting a 5 lug, semi float.
$11k for the Mopar 60's, 8 lug full float.
-
No need for powder coat. Half the weight of those mopars and the brakes work great.
-
Don the narrow rear works great. Others do it too. Turns better. Shipping is creating and shipping. Is what it is. Mopar and dyna shipping is about the same. You drill your rotors... Takes 15 minutes.
-
Ok not half lol
RockJocks truly bolt in and use your calipers, front and rear, ebrake, brake lines stay etc.
I've been reading a lot of modifications are required to the mopars.
Nothing wrong with a 5 lug and FF isn't that big a deal unless you are a beater and or racing
-
So why isn't someone building and selling junk yard axles with artec trusses Ann's sensors for jks?
-
I talked to Hudlow last week. Since the rock bouncers have become so big junk yard axles are hard to find. Hudlow says their supplier has dried up. Johns were the last set and if you can find them you might as well buy new for the money. He said these rock bouncer builders are buying everything on the east coast.
-
I talked to Hudlow last week. Since the rock bouncers have become so big junk yard axles are hard to find. Hudlow says their supplier has dried up. Johns were the last set and if you can find them you might as well buy new for the money. He said these rock bouncer builders are buying everything on the east coast.
I have to say that if I had to do it all over again, I would have just worked with AllSouth to source the axles and probably would have just bought something new. I had lots of issues with my rear D70 and in the end Steve did right by me but lots of back and forth and lots of hassles and a set of R&P's.
-
Nothing wrong with a 5 lug and FF isn't that big a deal unless you are a beater and or racing
Flange axles bend, you and I have both done it more than once.
When I drop coin on a 60 it will be full float
Currie
Dynatrac
Mopar
I'm good w all of them. But I want a full upgrade. Big axle tube, big ring and pinion, 8 lugs and FF.
-
True but I've never know anyone to bend the RJ flange except me and it was understandable. The 44s are butter. Probably would have busted a hub on that rock if I had a full, or a wheel.
-
Yep, BIG rock was IN my wheel and I bumped it hard, like hitting a concrete wall.
-
https://atlanta.craigslist.org/atl/cto/5239066868.html
-
http://www.pirate4x4.com/forum/misc-stuff-sale/2143233-2-12-fox-2-air-shocks-nitrogen-fill-kit.html (http://www.pirate4x4.com/forum/misc-stuff-sale/2143233-2-12-fox-2-air-shocks-nitrogen-fill-kit.html)
First post...
"...Also have a DIY nitrogen fill kit with a regulator, powertank hose, and a no-loss valve. last used about a year after the shocks ( I use to have some tricky motorcycle tires and would use that to fill it up). Empty $150+shipping...
Located on the east side of Atlanta."
-
Heck of a build list...
http://www.jkowners.com/forum/showthread.php?t=272906 (http://www.jkowners.com/forum/showthread.php?t=272906)
2007 JKU Sahara
Motech LS3/6L80/atlas swap
Currie rock jock 70 front axle. 5:38's ARB, RCV shafts, Yukon hubs
Currie rock jock 70 rear axle 5:38's, ARB, 40 spline shafts
Complete currie 4" lift including front and rear aluminum antirock sway bars
King jk air bumps
Black magic big break kit with master cylinder upgrade
Warn powerplant
SPod 6 switch panel with air gauge to monitor ARB's
Gen right aluminum bumpers front and rear
PSC aluminum fenders front and rear
PSC steel brawler rockers
Full Artec aluminum skid plates
west Texas offroad hydro assist
Currie HD tierod
Synergy HD draglink
40" nitto trail grapplers at 95%
Raceline beadlocks
TOTL innovations heat reducing hood
Mastercraft baja RS seats.
Rock hard sport cage
Trucklite LED headlights
Front and rear LED pods
PSC trampstamp
Hot heads headliner in hardtop
Lifetime satalite radio
Power doors and windows
-
Heck of a build list...
http://www.jkowners.com/forum/showthread.php?t=272906 (http://www.jkowners.com/forum/showthread.php?t=272906)
2007 JKU Sahara
Motech LS3/6L80/atlas swap
Currie rock jock 70 front axle. 5:38's ARB, RCV shafts, Yukon hubs
Currie rock jock 70 rear axle 5:38's, ARB, 40 spline shafts
Complete currie 4" lift including front and rear aluminum antirock sway bars
King jk air bumps
Black magic big break kit with master cylinder upgrade
Warn powerplant
SPod 6 switch panel with air gauge to monitor ARB's
Gen right aluminum bumpers front and rear
PSC aluminum fenders front and rear
PSC steel brawler rockers
Full Artec aluminum skid plates
west Texas offroad hydro assist
Currie HD tierod
Synergy HD draglink
40" nitto trail grapplers at 95%
Raceline beadlocks
TOTL innovations heat reducing hood
Mastercraft baja RS seats.
Rock hard sport cage
Trucklite LED headlights
Front and rear LED pods
PSC trampstamp
Hot heads headliner in hardtop
Lifetime satalite radio
Power doors and windows
Come on man...this is supposed to be a "good deal" thread...$85K...WTF!
-
Come on man...this is supposed to be a "good deal" thread...$85K...WTF!
//LMAO//
Just big numbers, but if you're buying a rig with that spec, not so bad. Cheaper than building it.
-
Doesn't seem cheaper to build to me
-
Did you make a parts list....
The LS3 trans conversion is $28k.
Axles are 9k each.
Atlas 3000
Wheels
Tires
Bumpers
Winch
Fenders
Lift
Air bumps
Lifetime sat radio!
Adds up quick
-
Did you make a parts list....
The LS3 trans conversion is $28k.
Axles are 9k each.
Atlas 3000
Wheels
Tires
Bumpers
Winch
Fenders
Lift
Air bumps
Lifetime sat radio!
Adds up quick
Well damn, I didn't see the lifetime sat radio
-
The LS3 trans conversion is $28k.
More reason to go with an LJ
-
http://atlanta.craigslist.org/atl/cto/5248748970.html (http://atlanta.craigslist.org/atl/cto/5248748970.html)
-
http://atlanta.craigslist.org/atl/cto/5248748970.html (http://atlanta.craigslist.org/atl/cto/5248748970.html)
Damn, I almost bought it just because it was so cheap. I hope a GATR got it.
- Torg
-
I'm thinking scam
-
http://atlanta.craigslist.org/atl/cto/5248748970.html (http://atlanta.craigslist.org/atl/cto/5248748970.html)
Damn, I almost bought it just because it was so cheap. I hope a GATR got it.
- Torg
That's a deal. Wish it 5k axles!
-
I'm thinking scam
Correct it was.
-
http://atlanta.craigslist.org/nat/tls/5253306545.html (http://atlanta.craigslist.org/nat/tls/5253306545.html)
Shop press $50 Jasper
-
http://atlanta.craigslist.org/atl/cto/5250740522.html (http://atlanta.craigslist.org/atl/cto/5250740522.html)
(http://images.tapatalk-cdn.com/15/10/08/7f8ef78b78a43f7a7de979c8e25aba30.jpg)
-
Dang LJ is a steal. I bet its gone or he will raise the price when he is over run with emails. I'm trying.
-
Wish I had a Silverado laying around to give him
-
IMHO this is a damn good deal.
(http://i408.photobucket.com/albums/pp168/lt99ls1/wow_zpsfvz8bwmq.jpg) (http://s408.photobucket.com/user/lt99ls1/media/wow_zpsfvz8bwmq.jpg.html)
-
@lt99ls1 Larry, or @Mortalis5509
Does that front have enough room for a spring perch or are you forced into coil overs or ORI's/etc?
IS that a 60 or 70 or 10.5 rear?
-
@lt99ls1 Larry, or @Mortalis5509
Does that front have enough room for a spring perch or are you forced into coil overs or ORI's/etc?
IS that a 60 or 70 or 10.5 rear?
He linked you something above, but those year model trucks use coil springs. May could use the stock perch, pending the coil fit in it properly. The driver side doesn't have a lot of exposed tube, but you can make something happen.
I have a jrat 69 housing. Could reuse everything from those axle but with a lot less weight and even more clearance.
-
The 05 and up superduty fronts have alot of space the drivers side, think 78-79 snowfighter dana 60 but with more beef.
I would still try and haggle with the guy on the price just to see if he has any wiggle room.
Front, rear, wheels, 241or case and at least the front truss.
-
I'm running coils with mine... Stock coils mount with a bucket off the inner C so it would end up being pretty tall going that route. I also think the stock Ford springs taper down to a small coil both ends. Just cut some of the cast back and you can easily mount a coil and link.
-
http://atlanta.craigslist.org/atl/cto/5250740522.html (http://atlanta.craigslist.org/atl/cto/5250740522.html)
(http://images.tapatalk-cdn.com/15/10/08/7f8ef78b78a43f7a7de979c8e25aba30.jpg)
So who bought it?!
not me
-
https://tucson.craigslist.org/cto/5266170570.html
-
^^^^nice Jeep but it's a manual
-
So who bought it?!
Was a SCAM
-
^^^^nice Jeep but it's a manual
AND STILL ON 44''s.
But it's purdy
-
Seems like a good deal to me:
Loaded JK w armor and Rubi axles and more for $25k
http://www.jkowners.com/forum/showthread.php?t=228081 (http://www.jkowners.com/forum/showthread.php?t=228081)
-
Seems like a smoking good deal to me:
Loaded JK w armor and Rubi axles and more for $25k
http://www.jkowners.com/forum/showthread.php?t=228081 (http://www.jkowners.com/forum/showthread.php?t=228081)
I tried and tried to get that dude to trade me wheels and tires, he wouldn't do it.
His front locker is not working
Been for sale over a year...something is up with that jeep or he would have sold it.
-
Seems like a smoking good deal to me:
Loaded JK w armor and Rubi axles and more for $25k
http://www.jkowners.com/forum/showthread.php?t=228081 (http://www.jkowners.com/forum/showthread.php?t=228081)
I tried and tried to get that dude to trade me wheels and tires, he wouldn't do it.
His front locker is not working
Been for sale over a year...something is up with that jeep or he would have sold it.
Rear locker not hooked up... weird, low cost fix for DANNY! @PHANTOM
And now he damaged the tailgate somehow. DANNY!
//LMAO//
-
Typical 3.8. Chrysler has an allowable oil consumption for the 3.8 and that's within spec.
-
not me either. Had a female friend of mine that let her oil change go a little long and it ran completely out of oil. Warranty denied and $ 3500 later she had to have it rebuilt. When I say she let the oil change go long I mean she went to 8000 instead of 5000 not a whole year or anything. Pretty shitty way to do business if you ask me.
-
Typical 3.8. Chrysler has an allowable oil consumption for the 3.8 and that's within spec.
Mine doesn't do that
-
There are a lot of engines that do that...
Many 5.3s from 2008 2009 had the issue as well. It is not uncommon.
-
Consider yourself lucky. It's a known problem. Shitty heads I think.
-
Most 3.8 jk motors that go through oil were diagnosed with Spun main bearing.
-
I have a 2010 3.8 with 180,000 miles. Still running strong
-
Most 3.8 jk motors that go through oil were diagnosed with Spun main bearing.
Exactly what happened to my 07 JKUR. Then I had to rebuild it. It was burning oil at a fast rate.
-
180k! Wow.
I have a warranty to 130k but we will run out of time first.
-
https://atlanta.craigslist.org/atl/cto/5289655447.html
-
https://atlanta.craigslist.org/atl/cto/5289655447.html
"not a work truck" my ass, the dang bed is collapsing like they have put a stack of engine blocks in it. someone needs to tell him they put those "custom tail pipes" on at the factory.
-
https://atlanta.craigslist.org/atl/cto/5289655447.html
"not a work truck" my ass, the dang bed is collapsing like they have put a stack of engine blocks in it. someone needs to tell him they put those "custom tail pipes" on at the factory.
I still want that truck
-
https://atlanta.craigslist.org/atl/cto/5289655447.html
"not a work truck" my ass, the dang bed is collapsing like they have put a stack of engine blocks in it. someone needs to tell him they put those "custom tail pipes" on at the factory.
I still want that truck
its not like the bed being bent ruins the truck, just means they have hauled some serious heavy stuff
-
https://atlanta.craigslist.org/atl/cto/5289655447.html
"not a work truck" my ass, the dang bed is collapsing like they have put a stack of engine blocks in it. someone needs to tell him they put those "custom tail pipes" on at the factory.
I still want that truck
its not like the bed being bent ruins the truck, just means they have hauled some serious heavy stuff
Probably mostly hookers
-
https://atlanta.craigslist.org/atl/cto/5289655447.html
"not a work truck" my ass, the dang bed is collapsing like they have put a stack of engine blocks in it. someone needs to tell him they put those "custom tail pipes" on at the factory.
I still want that truck
its not like the bed being bent ruins the truck, just means they have hauled some serious heavy stuff
Probably mostly hookers
Heavy hookers? Or enough skinny hookers that together would be heavy enough to damage a truck bed?
Sent from my iPhone using Tapatalk
-
I enjoy the skinny version myself
Sent from my XT1254 using Tapatalk
-
Says the recently married man.... //LMAO//
-
You can get a lot better truck than that J.
No comprende
-
Says the recently married man.... //LMAO//
just sayin, you know, back in the day //OLDSKOOL// //LMAO//
-
Yea I hear you man........ //cheers2//
-
Danny let's go in on this together
$19900 for a14 rubi
http://www.daveysjeeps.com/repairables/R110007.html
@phantom
-
Danny let's go in on this together
$19900 for a14 rubi
http://www.autoblog.com/2015/11/04/2016-chevy-copo-camaro-sema-2015-video/?ncid=edlinkusauto00000016 (http://www.autoblog.com/2015/11/04/2016-chevy-copo-camaro-sema-2015-video/?ncid=edlinkusauto00000016)
Did you paste the wrong link? I confused.
-
Link corrected
On 3rd double crown and 330 wake up
But that link was a good one too
-
A brand new 2 door is "only" $30K. Warranty & no registration hassles.
-
Danny let's go in on this together
$19900 for a14 rubi
http://www.daveysjeeps.com/repairables/R110007.html (http://www.daveysjeeps.com/repairables/R110007.html)
@PHANTOM
If you were gonna rebuild one, that would be a good choice. That thing could not have been too far into the red, no airbag deployment, no obvious frame or suspension damage, it had to be what Id call an "owner total" where they pushed for it. Honestly I dont see enough damage in those pictures to total it at all, I would have at least tried to save it.
-
A brand new 2 door is "only" $30K. Warranty & no registration hassles.
Have you seen a 2 door Rubicon advertised for $ 30K?
Used ones with some miles are well above $30k on carmax.
- Torg
-
I built one online & that was the price. I'm not in market to buy, so I haven't seen one in person.
-
I built one online & that was the price. I'm not in market to buy, so I haven't seen one in person.
good to know...I'm kind of in the market for rock limo
- Torg
-
I built one online & that was the price. I'm not in market to buy, so I haven't seen one in person.
good to know...I'm kind of in the market for rock limo
- Torg
Yeah buddy!! Approved.
-
Really....... :)
I built one online & that was the price. I'm not in market to buy, so I haven't seen one in person.
good to know...I'm kind of in the market for rock limo
- Torg
Yeah buddy!! Approved.
Yep, for crawling curbs at the mall...not for taking anywhere I can get my TJ. Well, maybe for forest service trails. We'll see...I have a lot of vehicle debt as it is, bonus isn't until Feb, so it would have to be special for me to go in deeper or clean out cash to buy it. It will be a Rubicon and a 2012 or higher, if it happens.
-
I built one online & that was the price. I'm not in market to buy, so I haven't seen one in person.
good to know...I'm kind of in the market for rock limo
- Torg
Un approved
-
good to know...I'm kind of in the market for rock limo
- Torg
Is this to add to the fleet? Please say it isn't replacing the green machine?
-
good to know...I'm kind of in the market for rock limo
- Torg
Is this to add to the fleet? Please say it isn't replacing the green machine?
Added to the fleet...
- Torg
-
https://atlanta.craigslist.org/nat/ctd/5299065028.html
-
Pretty good deal there
-
Yeah, but to me a motor home makes more sense. Tow rig & a house.
-
https://m.facebook.com/groups/213137298760904?view=permalink&id=942742282467065
If the link works. This would be a food tow pig. Balground GA
-
https://m.facebook.com/groups/213137298760904?view=permalink&id=942742282467065
If the link works. This would be a food tow pig. Balground GA
Good. Stupid auto correct.
-
https://m.facebook.com/groups/213137298760904?view=permalink&id=942742282467065
If the link works. This would be a food tow pig. Balground GA
dead link for me
- Torg
-
Don't know why. It works on both platforms for me. I will link to in on the FB page. It's in the Ball Ground yard sale page.
-
Yeah no workie
-
Sorry. I have no way to link to it I guess. I tried to share it on FB but not even sure it worked there. It's on the Ball ground online yardsale page if anyone wants to look at it.
2004 GMD HD diesel for 11,000.
-
Didn't work there either. Is that a page that you have to get invited to? If so, that's probably why. Take a screenshot
-
http://atlanta.craigslist.org/nat/cto/5235515371.html (http://atlanta.craigslist.org/nat/cto/5235515371.html)
-
http://atlanta.craigslist.org/nat/cto/5235515371.html (http://atlanta.craigslist.org/nat/cto/5235515371.html)
Don't see a good deal
-
http://atlanta.craigslist.org/nat/cto/5235515371.html (http://atlanta.craigslist.org/nat/cto/5235515371.html)
That ad says its 28' long. It sure as heck didn't look that long. 28 feet is a big trailer for 3500 pound axles. I smell a typo
-
Total length still a stretch
-
http://atlanta.craigslist.org/nat/cto/5235515371.html (http://atlanta.craigslist.org/nat/cto/5235515371.html)
Don't see a good deal
Ya...I was thinking it was 28' foot deck ...seems longer than mine, so 18' wouldn't be right. On the axles, I wasn't thinking that one through correctly!
sorry.
-
Ah man.... now I see it
Duraburb!
http://www.ebay.com/itm/Chevrolet-Suburban-2500-HD-LT-DURAMAX-DIESEL-CONVERSION-4X4-MUST-SEE-/131646804747?forcerrptr=true&hash=item1ea6c2d30b:g:a8UAAOSwu-BWPg1D&item=131646804747 (http://www.ebay.com/itm/Chevrolet-Suburban-2500-HD-LT-DURAMAX-DIESEL-CONVERSION-4X4-MUST-SEE-/131646804747?forcerrptr=true&hash=item1ea6c2d30b:g:a8UAAOSwu-BWPg1D&item=131646804747)
-
That's all you Doug!
Sent from my iPhone using Tapatalk
-
Well damn they sold the used 2015 I was working my way up in and then down on... Something just didn't feel right. So the search goes on. Seems climate control is on a lot more 14's than 15s
-
Ah man.... now I see it
Duraburb!
http://www.ebay.com/itm/Chevrolet-Suburban-2500-HD-LT-DURAMAX-DIESEL-CONVERSION-4X4-MUST-SEE-/131646804747?forcerrptr=true&hash=item1ea6c2d30b:g:a8UAAOSwu-BWPg1D&item=131646804747 (http://www.ebay.com/itm/Chevrolet-Suburban-2500-HD-LT-DURAMAX-DIESEL-CONVERSION-4X4-MUST-SEE-/131646804747?forcerrptr=true&hash=item1ea6c2d30b:g:a8UAAOSwu-BWPg1D&item=131646804747)
Damn that's sweet.
-
Damn...built TJ
http://www.pirate4x4.com/forum/vehicles-trailers-sale/2191977-2002-tj-killer-deal-4-linked-front-rear-60-14-atlas-oris-42s-etc.html
-
That is a sweet TJ
-
Damn...built TJ
http://www.pirate4x4.com/forum/vehicles-trailers-sale/2191977-2002-tj-killer-deal-4-linked-front-rear-60-14-atlas-oris-42s-etc.html (http://www.pirate4x4.com/forum/vehicles-trailers-sale/2191977-2002-tj-killer-deal-4-linked-front-rear-60-14-atlas-oris-42s-etc.html)
That's one hell of a daily driver! I wish I had the $$ laying around for something like that.
-
Been for sale on JKO for months. It is nice.
Surprised it's not gone yet.
-
Been for sale on JKO for months. It is nice.
Surprised it's not gone yet.
Sounds like it changed hands. The new seller looks like he bought it just to flip it for some cash so I'm curious how low it ended up going.
Okay, sell my '14 Rubicon and buy a Ford F250 4x4 Powerstroke as my daily driver. Buy a trailer. Then buy this Jeep/Buggy for wheeling. The wife would probably make me sell my Harley though (cost more than the Juggy). Hmmmmmmm
-
Been for sale on JKO for months. It is nice.
Surprised it's not gone yet.
Sounds like it changed hands. The new seller looks like he bought it just to flip it for some cash so I'm curious how low it ended up going.
Okay, see my '14 Rubicon and buy a Ford F250 4x4 Powerstroke as my daily driver. Buy a trailer. Then buy this Jeep/Buggy for wheeling. The wife would probably make me sell my Harley though (cost more than the Juggy). Hmmmmmmm
Nice plan, especially if you're itching to have a trail rig you can beat on a little more..
Sent from my iPhone using Tapatalk
-
They must offer value to get someone to not buy an HD version of the big three. The value I could see is the XD being priced at the low end of a big V8 from the heavy duty trucks.
- Torg
-
Damn...built TJ
http://www.pirate4x4.com/forum/vehicles-trailers-sale/2191977-2002-tj-killer-deal-4-linked-front-rear-60-14-atlas-oris-42s-etc.html (http://www.pirate4x4.com/forum/vehicles-trailers-sale/2191977-2002-tj-killer-deal-4-linked-front-rear-60-14-atlas-oris-42s-etc.html)
Pretty nice rig. I like that rear cab enclosure
-
WHATTTTT?????
http://atlanta.craigslist.org/atl/cto/5321607204.html (http://atlanta.craigslist.org/atl/cto/5321607204.html)
-
Go get it. Sometimes if it looks too good to be true, it is. Hopefully it's not a scam
-
I know that's crazy! I don't have the funds of I would.
-
Sccccccam
-
Actually is a joke by friends like Jay would do to Tony
-
Actually is a joke by friends like Jay would do to Tony
that's funny!
- Torg
-
for someone looking for a "real" toy hauler.
https://atlanta.craigslist.org/atl/rvs/5341870825.html
-
A lot of trailer for $4k
http://atlanta.craigslist.org/nat/for/5342173394.html
-
A lot of trailer for $4k
http://atlanta.craigslist.org/nat/for/5342173394.html
how much do you think that thing weighs?
- Torg
-
I have no good estimate but I bet it's HEAVY! I am sure they are 8 lug axles but with only two you have more deck space than you could probably use within the capacity. Unless you put a bunch of Sami's on there.
GA titles trailers over 2K so I wonder why the ad says bill of sale only.
-
GA titles trailers over 2K so I wonder why the ad says bill of sale only.
Agree, clarifying, Trailers that weigh more than 2000#s empty
-
Could add a 3rd axle and get the GVWR moved up to 16,000# if your truck is 10,000#.
If you want more, get a Non Commercial CDL.
A driver needs a CDL if the vehicle meets one of the following definitions of a CMV: Class A truck. Any combination of vehicles with a GVWR (Gross Vehicle Weight Rating) of 26,001 or more pounds (11,793 kg) provided the GVWR of the vehicle(s) being towed is in excess of 10,000 pounds (4536 kg).
-
http://atlanta.craigslist.org/atl/ctd/5331668773.html (http://atlanta.craigslist.org/atl/ctd/5331668773.html)
-
Another trailer, but with 3 - 7000# axles... I like the idea.
http://atlanta.craigslist.org/atl/hvo/5347210573.html (http://atlanta.craigslist.org/atl/hvo/5347210573.html)
-
http://atlanta.craigslist.org/atl/rvs/5341870825.html (http://atlanta.craigslist.org/atl/rvs/5341870825.html)
(http://images.craigslist.org/00C0C_eeYAXk1QqpZ_600x450.jpg)
-
Another trailer, but with 3 - 7000# axles... I like the idea.
http://atlanta.craigslist.org/atl/hvo/5347210573.html (http://atlanta.craigslist.org/atl/hvo/5347210573.html)
I like it a lot, but I don't have $6K sitting around and storage would be a problem. Good post...$6K is not bad at all.
-
I know. I wish I had the extra cash and storage to float through Moab!
-
I know. I wish I had the extra cash and storage to float through Moab!
For the first trip that Ben went with me on...
I floated a Duramax and a trailer, and sold them both for a profit upon return. It can be done.
-
I know. I wish I had the extra cash and storage to float through Moab!
For the first trip that Ben went with me on...
I floated a Duramax and a trailer, and sold them both for a profit upon return. It can be done.
Wife would shoot me.
-
I know. I wish I had the extra cash and storage to float through Moab!
For the first trip that Ben went with me on...
I floated a Duramax and a trailer, and sold them both for a profit upon return. It can be done.
Wife would shoot me.
Sometimes you have to go home early to go big later.
-
I know. I wish I had the extra cash and storage to float through Moab!
For the first trip that Ben went with me on...
I floated a Duramax and a trailer, and sold them both for a profit upon return. It can be done.
Wife would shoot me.
Sometimes you have to go home early to go big later.
Exactly!
-
I know. I wish I had the extra cash and storage to float through Moab!
For the first trip that Ben went with me on...
I floated a Duramax and a trailer, and sold them both for a profit upon return. It can be done.
Wife would shoot me.
Doug said a profit is guaranteed. Tell her it's just a business thing and you've got it covered.
Sent from my iPhone using Tapatalk
-
I know. I wish I had the extra cash and storage to float through Moab!
For the first trip that Ben went with me on...
I floated a Duramax and a trailer, and sold them both for a profit upon return. It can be done.
That was before the tag tax...flipping vehicles these days gets expensive.
- Torg
-
Sometimes you have to go home early to go big later.
//LMAO// //LMAO// //rtft//
So you died trying..
-
I know. I wish I had the extra cash and storage to float through Moab!
For the first trip that Ben went with me on...
I floated a Duramax and a trailer, and sold them both for a profit upon return. It can be done.
That was before the tag tax...flipping vehicles these days gets expensive.
- Torg
There are ways....
-
I know. I wish I had the extra cash and storage to float through Moab!
For the first trip that Ben went with me on...
I floated a Duramax and a trailer, and sold them both for a profit upon return. It can be done.
That was before the tag tax...flipping vehicles these days gets expensive.
- Torg
There are ways....
enlighten me...oh wise one
- Torg
-
I know. I wish I had the extra cash and storage to float through Moab!
For the first trip that Ben went with me on...
I floated a Duramax and a trailer, and sold them both for a profit upon return. It can be done.
That was before the tag tax...flipping vehicles these days gets expensive.
- Torg
There are ways....
enlighten me...oh wise one
- Torg
I'm convinced that Doug is part of an actual mafia. Hook it up Doug.
-
I cannot write of such anti taxation extremism
-
Couple of double deals:
http://chattanooga.craigslist.org/hvo/5342554065.html (http://chattanooga.craigslist.org/hvo/5342554065.html)
http://huntsville.craigslist.org/hvo/5317662235.html (http://huntsville.craigslist.org/hvo/5317662235.html)
http://greenville.craigslist.org/hvo/5341021808.html (http://greenville.craigslist.org/hvo/5341021808.html)
-
CUMMINS 5.9 DUALLY FOR $7999. oh crap
http://tallahassee.craigslist.org/ctd/5331972000.html (http://tallahassee.craigslist.org/ctd/5331972000.html)
-
CUMMINS 5.9 DUALLY FOR $7999. oh crap
http://tallahassee.craigslist.org/ctd/5331972000.html (http://tallahassee.craigslist.org/ctd/5331972000.html)
Damn...that's awesome for a full time tow pig. @raisinhead
- Torg
-
https://greenville.craigslist.org/hvd/5321417784.html
Here is a trailer.
-
CUMMINS 5.9 DUALLY FOR $7999. oh crap
http://tallahassee.craigslist.org/ctd/5331972000.html (http://tallahassee.craigslist.org/ctd/5331972000.html)
Damn...that's awesome for a full time tow pig. @raisinhead
- Torg
I wish man. Not good timing for me.
-
Damn...that's awesome for a full time tow pig. @Raisinhead
- Torg
Of course since I just bought a truck
I wish man. Not good timing for me.
Never a good time for a man with many fields like Ben and Jay
(http://weknowyourdreams.com/images/children/children-02.jpg)
-
Maybe this in a few years for my tow vehicle
http://atlanta.craigslist.org/nat/cto/5317212337.html
-
Maybe this in a few years for my tow vehicle
http://atlanta.craigslist.org/nat/cto/5317212337.html (http://atlanta.craigslist.org/nat/cto/5317212337.html)
Running 45mph you'll be a week late getting out there.
@clark123456
Here is one way to do it with less weight in the triler...
http://lexington.craigslist.org/tls/5315692527.html (http://lexington.craigslist.org/tls/5315692527.html)
(http://images.craigslist.org/00G0G_3KTRCqHwxE5_600x450.jpg)
-
@Doug if I had a dually
- Torg
-
@Doug if I had a dually
- Torg
Why? That's a short trailer made to haul 2'
-
@Doug if I had a dually
- Torg
Why? That's a short trailer made to haul 2'
it puts a lot of weight on the rear axle/tires.
- Torg
-
Got cha
-
Airbags are your friends.
-
Airbags are your friends.
I wouldn't think that they would help reduce any weight for the axles or tires, just suspension. Does it?
-
it puts a lot of weight on the rear axle/tires.
I'm not sure that trailer puts anymore weight on the truck than the long double car trailer does with 1 rig in front of the trailer axles and 1 rig over them.
-
Airbags are your friends.
I wouldn't think that they would help reduce any weight for the axles or tires, just suspension. Does it?
all bags would help is the suspension and sway control, you really gotta watch overloading the rear axle bearings on a single rear wheel tow pig.. thats not something you wanna have to repair between here and Moab.. on the highway..
-
Airbags are your friends.
I wouldn't think that they would help reduce any weight for the axles or tires, just suspension. Does it?
all bags would help is the suspension and sway control, you really gotta watch overloading the rear axle bearings on a single rear wheel tow pig.. thats not something you wanna have to repair between here and Moab.. on the highway..
I was concerned about bearings and tires. Some contend the airbags put more pressure on the front tires, so you can steer; I haven't been convinced that's what they do. I think they just help level it and take some of the bounce out of the ride (shock absorber).
- Torg
-
This turned into a tow-pig/trailer thread //popcorn// //BEER//
-
Airbags are your friends.
I wouldn't think that they would help reduce any weight for the axles or tires, just suspension. Does it?
all bags would help is the suspension and sway control, you really gotta watch overloading the rear axle bearings on a single rear wheel tow pig.. thats not something you wanna have to repair between here and Moab.. on the highway..
I was concerned about bearings and tires. Some contend the airbags put more pressure on the front tires, so you can steer; I haven't been convinced that's what they do. I think they just help level it and take some of the bounce out of the ride (shock absorber).
- Torg
My research and discussion w others is that air bags do as you say...level out the rear but do not distribute any weight to the front.
-
Oh I need this.
Dang Jared.
http://www.hardlinecrawlers.com/forums/index.php?topic=48945.0
-
Always scary till you see some pictures. Nice build list though for the money.
Sent from my iPhone using Tapatalk
-
LJ deal
http://www.daveysjeeps.com/repairables/R786198.html
JK deal
http://www.daveysjeeps.com/repairables/R641551.html
-
LJ deal
http://www.daveysjeeps.com/repairables/R786198.html
JK deal
http://www.daveysjeeps.com/repairables/R641551.html
I don't see the price on either of those, am I not looking in the right spot?
-
Looks like $6200 on LJ
don't see it on JK
-
Summary page shows prices.
http://www.daveysjeeps.com/repairables.html
-
I almost pulled the trigger on one. I talked to Davey about it. I believe it is hard/impossible to get full coverage on a salvage title vehicle. Other than that I don't know of any caveats.
Sent from my iPhone using Tapatalk
-
I almost pulled the trigger on one. I talked to Davey about it. I believe it is hard/impossible to get full coverage on a salvage title vehicle. Other than that I don't know of any caveats.
Sent from my iPhone using Tapatalk
Once inspected it becomes a rebuilt title. Rebuilt titles are a lot easier.
-
I almost pulled the trigger on one. I talked to Davey about it. I believe it is hard/impossible to get full coverage on a salvage title vehicle. Other than that I don't know of any caveats.
Sent from my iPhone using Tapatalk
Once inspected it becomes a rebuilt title. Rebuilt titles are a lot easier.
inspected by who?
Have you done this?
-
We call a guy out to the shop to do this. He does a full inspection and verifies the vehicle is in perfect condition. After he signs off on it you apply for the title. Then you can get full coverage or whatever you want.
The inspection takes about an hours and title will be at your door in 2-3 weeks from mailing date.
-
I almost pulled the trigger on one. I talked to Davey about it. I believe it is hard/impossible to get full coverage on a salvage title vehicle. Other than that I don't know of any caveats.
Sent from my iPhone using Tapatalk
Once inspected it becomes a rebuilt title. Rebuilt titles are a lot easier.
inspected by who?
Have you done this?
I didn't go through with it but did all my homework and my father in law did. He had a jeep that was part of a house fire. The jeep was never touched by the fire but it was salvaged out. He had it for a few years.
It needs to be towed to an inspection station or at the time they could come to your house. It needs to function like a normal rig. Blinkers, brakes, light... all safety stuff you know. Now I read it was suppose to be stock. Now how modified you can get away with, not sure. Point could be made that it was modified to begin with. I think its more about road worthy and safety.
-
We call a guy out to the shop to do this. He does a full inspection and verifies the vehicle is in perfect condition. After he signs off on it you apply for the title. Then you can get full coverage or whatever you want.
The inspection takes about an hours and title will be at your door in 2-3 weeks from mailing date.
good stuff right there. thanks!
-
I can get you his number if/when needed. He'll come to you.
-
I almost pulled the trigger on one. I talked to Davey about it. I believe it is hard/impossible to get full coverage on a salvage title vehicle. Other than that I don't know of any caveats.
Sent from my iPhone using Tapatalk
Once inspected it becomes a rebuilt title. Rebuilt titles are a lot easier.
inspected by who?
Have you done this?
I didn't go through with it but did all my homework and my father in law did. He had a jeep that was part of a house fire. The jeep was never touched by the fire but it was salvaged out. He had it for a few years.
It needs to be towed to an inspection station or at the time they could come to your house. It needs to function like a normal rig. Blinkers, brakes, light... all safety stuff you know. Now I read it was suppose to be stock. Now how modified you can get away with, not sure. Point could be made that it was modified to begin with. I think its more about road worthy and safety.
It has to be inspected in the same condition as jeep would have sold it off the lot in its model year. That's how the law reads, but I argued that lots are sold with lifts/wheels/tires/soft tops but the inspector could never give me a clear answer, only that we would have to do the inspection and see what the state allowed. Pre-modified salvage jeeps are super tricky, especially where most of you guys have to also pass emissions.
Sent from my XT1254 using Tapatalk
-
Who wants a gooseneck? I want dibs on your trailer if someone upgrades.
circle w gooseneck 14000 gvw
http://atlanta.craigslist.org/eat/hvo/5384079623.html
-
Who wants a gooseneck? I want dibs on your trailer if someone upgrades.
circle w gooseneck 14000 gvw
http://atlanta.craigslist.org/eat/hvo/5384079623.html
get one of these for your tow pig: (http://mrtruck.com/img/eq2010a1.jpg)
- Torg
-
Who wants a gooseneck? I want dibs on your trailer if someone upgrades.
circle w gooseneck 14000 gvw
http://atlanta.craigslist.org/eat/hvo/5384079623.html
get one of these for your tow pig: (http://mrtruck.com/img/eq2010a1.jpg)
- Torg
Haha, I'd hit max towing capacity empty.
-
Who wants a gooseneck? I want dibs on your trailer if someone upgrades.
circle w gooseneck 14000 gvw
http://atlanta.craigslist.org/eat/hvo/5384079623.html
Not a bad trailer. For those that don't know, a gooseneck will pull better, distribute weight better, and a better ride without creating the leverage a bumper pull does.
-
Who wants a gooseneck? I want dibs on your trailer if someone upgrades.
circle w gooseneck 14000 gvw
http://atlanta.craigslist.org/eat/hvo/5384079623.html (http://atlanta.craigslist.org/eat/hvo/5384079623.html)
Not a bad trailer. For those that don't know, a gooseneck will pull better, distribute weight better, and a better ride without creating the leverage a bumper pull does.
Cons are you lose your bed space though. @jc79 made the switch from goose.
Very little. I pack around without a problem and haven't ran out of space. The benefits of them out way that minor detail.
My next trailer is an enclosed gooseneck.
-
Can't pull a goose with a Motor home.
-
Who wants a gooseneck? I want dibs on your trailer if someone upgrades.
circle w gooseneck 14000 gvw
http://atlanta.craigslist.org/eat/hvo/5384079623.html (http://atlanta.craigslist.org/eat/hvo/5384079623.html)
Not a bad trailer. For those that don't know, a gooseneck will pull better, distribute weight better, and a better ride without creating the leverage a bumper pull does.
Cons are you lose your bed space though. @jc79 made the switch from goose.
Very little. I pack around without a problem and haven't ran out of space. The benefits of them out way that minor detail.
My next trailer is an enclosed gooseneck.
I disagree but to each their own :)
There is that other benefit of Jay getting a smoking deal on someone's pull behind trailer. Haha.
-
Who wants a gooseneck? I want dibs on your trailer if someone upgrades.
circle w gooseneck 14000 gvw
http://atlanta.craigslist.org/eat/hvo/5384079623.html (http://atlanta.craigslist.org/eat/hvo/5384079623.html)
Not a bad trailer. For those that don't know, a gooseneck will pull better, distribute weight better, and a better ride without creating the leverage a bumper pull does.
Cons are you lose your bed space though. @jc79 made the switch from goose.
The key is covered storage. I love having a tonneau cover on the bed. Not possible with gooseneck...
Sent from my iPhone using Tapatalk
-
Who wants a gooseneck? I want dibs on your trailer if someone upgrades.
circle w gooseneck 14000 gvw
http://atlanta.craigslist.org/eat/hvo/5384079623.html (http://atlanta.craigslist.org/eat/hvo/5384079623.html)
Not a bad trailer. For those that don't know, a gooseneck will pull better, distribute weight better, and a better ride without creating the leverage a bumper pull does.
Cons are you lose your bed space though. @jc79 made the switch from goose.
Don (@BigPrince), what exactly do you mean by "you lose your bed space". Do you mean the bed is unusable?
Jared (@jc79), did your gooseneck mount take up more space than the mount in the picture below?
(http://horizontransport.com/images/Equipment/Gooseneck.JPG)
-
Who wants a gooseneck? I want dibs on your trailer if someone upgrades.
circle w gooseneck 14000 gvw
http://atlanta.craigslist.org/eat/hvo/5384079623.html (http://atlanta.craigslist.org/eat/hvo/5384079623.html)
Not a bad trailer. For those that don't know, a gooseneck will pull better, distribute weight better, and a better ride without creating the leverage a bumper pull does.
Cons are you lose your bed space though. @jc79 made the switch from goose.
Don (@BigPrince), what exactly do you mean by "you lose your bed space". Do you mean the bed is unusable?
Jared (@jc79), did your gooseneck mount take up more space than the mount in the picture below?
(http://horizontransport.com/images/Equipment/Gooseneck.JPG)
It doesn't have to. All of that mounts underneath my bed. Just the ball sticks up, but then the ball can be flipped upside down and it's like nothing is there.
-
Who wants a gooseneck? I want dibs on your trailer if someone upgrades.
circle w gooseneck 14000 gvw
http://atlanta.craigslist.org/eat/hvo/5384079623.html (http://atlanta.craigslist.org/eat/hvo/5384079623.html)
Not a bad trailer. For those that don't know, a gooseneck will pull better, distribute weight better, and a better ride without creating the leverage a bumper pull does.
Cons are you lose your bed space though. @jc79 made the switch from goose.
Don (@BigPrince), what exactly do you mean by "you lose your bed space". Do you mean the bed is unusable?
Jared (@jc79), did your gooseneck mount take up more space than the mount in the picture below?
(http://horizontransport.com/images/Equipment/Gooseneck.JPG)
It doesn't have to. All of that mounts underneath my bed. Just the ball sticks up, but then the ball can be flipped upside down and it's like nothing is there.
I know...but in almost a worst case scenario that hitch in the picture takes up the most bed space for a gooseneck, which leaves almost all of the room in front of it (towards the cab), behind it (towards the tailgate), and most of the left and right sides usable.
Before pulling Doug's trailer to Moab, I thought goosenecks meant no more storage in the bed, but I learned on that trip how much space is still available. We had a lot of crap jammed in the bed (coolers, water, 27 gallon storage bins, floor jack, DEF boxes, drive shafts, and some other stuff). Now, as Jared pointed out, it was not covered, so your stuff has to be waterproof or water resistant. I just want to make sure that other people who have not pulled a gooseneck understand that you can get it arranged so that you don't lose all of your bed space and in fact, you only limit a few things:
- Height of stuff in the bed from the front of the gooseneck hitch to the back of the bed (i.e., in front of the gooseneck hitch you can go tall).
- Dryness of stuff in the bed
- Nothing can be placed where the gooseneck connects to the hitch (two objects cannot occupy the same space stuff)
-
Not quoting the long post, but that's exactly correct. If you need something to stay dry, just buy those big cheap plastic totes at Walmart. I packed it out with all kinds of stuff and strapped it down to the trailer. Stayed dry when it rained that weekend .
-
Good point about possible security risk. I did put my stuff I wanted dry in my Jeep.
I think I would not want to go too much higher on the bumper pull than I'm at now. Encountering an expansion joint like those outside of Chattanooga (on the way to AOP) without prior warning and at higher weight would make me very uncomfortable.
What cover are you going with?
- Torg
-
Good point about possible security risk. I did put my stuff I wanted dry in my Jeep.
I think I would not want to go too much higher on the bumper pull than I'm at now. Encountering an expansion joint like those outside of Chattanooga (on the way to AOP) without prior warning and at higher weight would make me very uncomfortable.
What cover are you going with?
- Torg
I want a Retrax PowertraxPro but I'm not sure I want to spend that much. Pace Edwards Bedlocker is cheaper but it sure sounds like a struggling motor.
Damn, unless I'm storing gold under that, it would be hard to justify the cost of the Retrax or the Pace Edwards. Can you get an 8' version and only extend it to the length of your current truck bed? That way you could take it from truck to truck, unless you get something like the Ram Storage box in the bed sides.
I've had a soft tonneau cover on a truck bed for the last 6.5 years and I've never had anyone cut it to get to whatever stuff may be beneath it. YMMV
- Torg
-
For weight, use air bags. Keeps it from squatting a lot. It's on my list to do as I was a 32 - 34ft enclosed gooseneck.
-
http://www.hardlinecrawlers.com/forums/index.php?topic=36233.0
-
http://www.hardlinecrawlers.com/forums/index.php?topic=36233.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=36233.0)
surely he would take less, its been up over a year
-
@krawler00
@raisenhead
Bad arse
https://portland.craigslist.org/grg/cto/5410631373.html
-
They left out "ugly as hell".
-
They left out "ugly as hell".
I think it was implied. Haha. That was one unique rig
-
I maybe in love.
http://www.hardlinecrawlers.com/forums/index.php?topic=49844.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=49844.0)
-
Too nice to wheel (almost)
-
I maybe in love.
http://www.hardlinecrawlers.com/forums/index.php?topic=49844.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=49844.0)
Kevin has a nice jeep. It is nicer in person.
-
I maybe in love.
http://www.hardlinecrawlers.com/forums/index.php?topic=49844.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=49844.0)
Good Lord. I'd fight you for it Larry...I'd loose but I'd give it a shot. That thing is insane. Never seen a drag link like that before either
-
I maybe in love.
http://www.hardlinecrawlers.com/forums/index.php?topic=49844.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=49844.0)
Good Lord. I'd fight you for it Larry...I'd loose but I'd give it a shot. That thing is insane. Never seen a drag link like that before either
Just buy it and let me drive it once or twice.
-
I maybe in love.
http://www.hardlinecrawlers.com/forums/index.php?topic=49844.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=49844.0)
Good Lord. I'd fight you for it Larry...I'd loose but I'd give it a shot. That thing is insane. Never seen a drag link like that before either
Just buy it and let me drive it once or twice.
fair enough
I have found the LJ for me, its in Illinois. No one wants to buy mine though
-
I maybe in love.
http://www.hardlinecrawlers.com/forums/index.php?topic=49844.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=49844.0)
Drool...
-
Never seen a drag link like that before either
GenRight makes the bracket I used to run that set up on my XJ
http://www.genright.com/ProductInfo.aspx?productid=STK2510 (http://www.genright.com/ProductInfo.aspx?productid=STK2510)
-
I maybe in love.
http://www.hardlinecrawlers.com/forums/index.php?topic=49844.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=49844.0)
Drool...
If it weren't white.
-
I maybe in love.
http://www.hardlinecrawlers.com/forums/index.php?topic=49844.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=49844.0)
Drool...
If it weren't white.
Hell, I could care less what color it was. If it was only around $30k, I'd be driving to pick it up this weekend.
-
I maybe in love.
http://www.hardlinecrawlers.com/forums/index.php?topic=49844.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=49844.0)
Drool...
If it weren't white.
Hell, I could care less what color it was. If it was only around $30k, I'd be driving to pick it up this weekend.
That was my thought...if he would take 30K I'm on it. Time to place a call.
-
I maybe in love.
http://www.hardlinecrawlers.com/forums/index.php?topic=49844.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=49844.0)
Drool...
If it weren't white.
He owns a paint and body shop. I am sure he could paint it...... //;)//
-
Somebody needs to buy that. Toss a low ball offer out
-
Somebody needs to buy that. Toss a low ball offer out
Already sent one...
-
Somebody needs to buy that. Toss a low ball offer out
Already sent one...
If things get serious John I am going to AOP Saturday. I could put my eyes on it before you drive up.
-
Somebody needs to buy that. Toss a low ball offer out
Already sent one...
If things get serious John I am going to AOP Saturday. I could put my eyes on it before you drive up.
Thanks Bobby. I spoke to the guy (really nice guy) and it sounds like an awesome rig. He lives 5 min from AOP. 315hp/312 torque to the wheels (he has the dyno details). Heat and A/C work like factory. Major rub is no emissions (I live in a county where this is required to tag). He moved a little off his price for a cash offer but he knows what he has. Not being able to tag it is a deal killer for me because the main reason I would look at something like this is not as a replacement to my current rig, but as an overland style rig. I guess I need to stay on the JKU overland rig path...
-
Any clue what it will take to get it to pass emissions?
- Torg
-
Somebody needs to buy that. Toss a low ball offer out
Already sent one...
If things get serious John I am going to AOP Saturday. I could put my eyes on it before you drive up.
Thanks Bobby. I spoke to the guy (really nice guy) and it sounds like an awesome rig. He lives 5 min from AOP. 315hp/312 torque to the wheels (he has the dyno details). Heat and A/C work like factory. Major rub is no emissions (I live in a county where this is required to tag). He moved a little off his price for a cash offer but he knows what he has. Not being able to tag it is a deal killer for me because the main reason I would look at something like this is not as a replacement to my current rig, but as an overland style rig. I guess I need to stay on the JKU overland rig path...
If only you knew of a BA JKU for sale..
-
Any clue what it will take to get it to pass emissions?
- Torg
A friend or family member who lives in a non emissions county.
-
I maybe in love.
http://www.hardlinecrawlers.com/forums/index.php?topic=49844.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=49844.0)
Drool...
If it weren't white.
Nothing wrong with white jeeps
Sent from my SM-N910V using Tapatalk
-
Any clue what it will take to get it to pass emissions?
- Torg
Call the inspection folks. I bet nothing more than a simple inspection. I think the motor cannot be newer than the rig and if so, it clears as its an 04 block. Never hurts to pick up the phone.
-
Any clue what it will take to get it to pass emissions?
- Torg
Call the inspection folks. I bet nothing more than a simple inspection. I think the motor cannot be newer than the rig and if so, it clears as its an 04 block. Never hurts to pick up the phone.
I always thought it was the other way around, but I could have easily gotten that mixed up. I was under the impression motor had to be newer than car.
-
It's straightforward to delete sensors on LS motors to pass emissions, and to put the VIN into the computer. It's very likely much of this has already been done assuming CEL is off.
AFAIK the newer than frame requirement is only for rebuilt titles, but since it's passed inspection and is tagged in TN I doubt there's an issue.
-
The GA Clean Air Force website is not very clear but it does reference the EPA Clean Air Act rules and this engine swapping fact sheet. Typical of most regulations it leaves me with a lot of questions.
See the statement on GA's site saying Hot Tods must confirm to the EPA's standard for engine switching:
http://www.cleanairforce.com/motorists/waivers-extensions-exemptions/exemptions/ (http://www.cleanairforce.com/motorists/waivers-extensions-exemptions/exemptions/)
http://www.epa.gov/sites/production/files/documents/engswitch_0.pdf (http://www.epa.gov/sites/production/files/documents/engswitch_0.pdf)
It reads as what I have always heard which the engine needs to be same model year or newer as the chassis.
I would be curious to see what would actually happen at an inspection station when you pulling in the jeep which clearly was never offered with a V8. How in depth would the inspector look into it before plugging into the OBD2 port and reading the correct Jeep VIN and no CEL light or monitors on.
-
I would be curious to see what would actually happen at an inspection station when you pulling in the jeep which clearly was never offered with a V8. How in depth would the inspector look into it before plugging into the OBD2 port and reading the correct Jeep VIN and no CEL light or monitors on.
I'd love to drag that thing down to my emissions station (the local car wash) and have them run it. The kids that work there don't usually do anything other than tell me how much they love the current vehicle being tested (well, no one ever praised the Tundra).
I spoke with Cobb County Tag and they said the only way to exempt the emissions for this vehicle was to get a waiver from the Clean Air people...So, I tried to actually reach one of them...they have the automated phone system setup such that you can't reach a real person!
My Jeep has the CEL lit...I think on the 98 you can reset it and go immediately and it will pass.
If I go see this thing, I'll take my code reader and see what it spits out of the OBDII.
-
love living in Hall County.....
-
love living in Hall County.....
Can you sell me like 1/10th of an acre that has a mailing address? :)
-
$$$$
-
I would be curious to see what would actually happen at an inspection station when you pulling in the jeep which clearly was never offered with a V8. How in depth would the inspector look into it before plugging into the OBD2 port and reading the correct Jeep VIN and no CEL light or monitors on.
I'd love to drag that thing down to my emissions station (the local car wash) and have them run it. The kids that work there don't usually do anything other than tell me how much they love the current vehicle being tested (well, no one ever praised the Tundra).
I spoke with Cobb County Tag and they said the only way to exempt the emissions for this vehicle was to get a waiver from the Clean Air people...So, I tried to actually reach one of them...they have the automated phone system setup such that you can't reach a real person!
My Jeep has the CEL lit...I think on the 98 you can reset it and go immediately and it will pass.
If I go see this thing, I'll take my code reader and see what it spits out of the OBDII.
On The past two trucks I've had, if you reset the CEL, you need to drive it ~200mi for it to have data to read.
What year were they? I was under the impression the industry figured out people were doing the reset and emissions test close together, so they implemented the driving delay requirement. I thought that happened around 2000. IDK for sure.
-
$$$$
I have 4 $
-
I would be curious to see what would actually happen at an inspection station when you pulling in the jeep which clearly was never offered with a V8. How in depth would the inspector look into it before plugging into the OBD2 port and reading the correct Jeep VIN and no CEL light or monitors on.
I'd love to drag that thing down to my emissions station (the local car wash) and have them run it. The kids that work there don't usually do anything other than tell me how much they love the current vehicle being tested (well, no one ever praised the Tundra).
I spoke with Cobb County Tag and they said the only way to exempt the emissions for this vehicle was to get a waiver from the Clean Air people...So, I tried to actually reach one of them...they have the automated phone system setup such that you can't reach a real person!
My Jeep has the CEL lit...I think on the 98 you can reset it and go immediately and it will pass.
If I go see this thing, I'll take my code reader and see what it spits out of the OBDII.
On The past two trucks I've had, if you reset the CEL, you need to drive it ~200mi for it to have data to read.
What year were they? I was under the impression the industry figured out people were doing the reset and emissions test close together, so they implemented the driving delay requirement. I thought that happened around 2000. IDK for sure.
More research yielded better knowledge:
- 96 to 99 vehicles can have two (2) 'not ready' status codes
- >99 vehicles can have only one (1) 'not ready' status codes
One of many indisputable, fact based information locations with this information (forums on the internet populated by regular folks):
http://www.bimmerforums.com/forum/showthread.php?2025743-Emissions-clarification-how-many-not-ready-codes-allowed (http://www.bimmerforums.com/forum/showthread.php?2025743-Emissions-clarification-how-many-not-ready-codes-allowed)
-
I spoke to the guy "Kevin" who owns the rig. ECM has the vin from the donor 04 Chevy 2500. It only has one set of o2 sensors and no cats. Plot thickens because it is also a rebuilt title. He isn't required to have emissions so he has never had to pass it. As awesome as the rig looks (he emailed me build pictures). Too many variables for me to drop this kind of coin with the uncertainty about passing emissions which is a requirement where I live.
-
No mention of the rebuilt title in the ad.... kind of shady.
-
Yeah it sounds like a perfect trailer rig.
-
I would be curious to see what would actually happen at an inspection station when you pulling in the jeep which clearly was never offered with a V8. How in depth would the inspector look into it before plugging into the OBD2 port and reading the correct Jeep VIN and no CEL light or monitors on.
I'd love to drag that thing down to my emissions station (the local car wash) and have them run it. The kids that work there don't usually do anything other than tell me how much they love the current vehicle being tested (well, no one ever praised the Tundra).
I spoke with Cobb County Tag and they said the only way to exempt the emissions for this vehicle was to get a waiver from the Clean Air people...So, I tried to actually reach one of them...they have the automated phone system setup such that you can't reach a real person!
My Jeep has the CEL lit...I think on the 98 you can reset it and go immediately and it will pass.
If I go see this thing, I'll take my code reader and see what it spits out of the OBDII.
Shotgun if you go
-
I would be curious to see what would actually happen at an inspection station when you pulling in the jeep which clearly was never offered with a V8. How in depth would the inspector look into it before plugging into the OBD2 port and reading the correct Jeep VIN and no CEL light or monitors on.
I'd love to drag that thing down to my emissions station (the local car wash) and have them run it. The kids that work there don't usually do anything other than tell me how much they love the current vehicle being tested (well, no one ever praised the Tundra).
I spoke with Cobb County Tag and they said the only way to exempt the emissions for this vehicle was to get a waiver from the Clean Air people...So, I tried to actually reach one of them...they have the automated phone system setup such that you can't reach a real person!
My Jeep has the CEL lit...I think on the 98 you can reset it and go immediately and it will pass.
If I go see this thing, I'll take my code reader and see what it spits out of the OBDII.
Shotgun if you go
Talked it over with John and for the same reasons, it just isn't worth it. I was very close to being an obligatory member of the WJM...but it must not have been meant to be. :)
-
I'm with Kevin on emissions. I refused to live in a county with that crap. I'm in jackson, south of kevin.
-
Sometimes there are more important things like quality of school system over emissions requirements In a given county. Such is life.
-
Sometimes there are more important things like quality of school system over emissions requirements In a given county. Such is life.
Haha, yeah I was going to respond that I can't imagine choosing something as important as where to live based on emissions testing!
Sent from my iPhone using Tapatalk
-
I have not nor will I ever consider it a criteria for where to live....
Amen! Having said that, it would not prevent me from living in an area, either. At this particular time, I would like to have a plot of land that could get me out of this emissions BS. I have to wait 7 more years before my TJ is in the clear.
-
Or you could just fix the emissions... Ya know root cause and all that...
On my TJ...I still have to find out where this mysterious MAF sensor is located!
On the White LJ...it is the mismatched engine/model_year thing, plus not knowing exactly what all would need to be done (cats, O2 sensors, other?)
-
In the go big or go home category: http://www.hardlinecrawlers.com/forums/index.php?topic=49643.0
@bigprince
- Torg
-
The lake cabin is I a noon emissions county but by law I can't register my vehicles there.
-
The lake cabin is I a noon emissions county but by law I can't register my vehicles there.
primary residence thing?
- Torg
-
The lake cabin is I a noon emissions county but by law I can't register my vehicles there.
primary residence thing?
- Torg
They told me where the vehicle is most days of the year.
Boat is registered there.
Cars at the house here.
One day, all there.
-
Or you could just fix the emissions... Ya know root cause and all that...
On my TJ...I still have to find out where this mysterious MAF sensor is located!
On the White LJ...it is the mismatched engine/model_year thing, plus not knowing exactly what all would need to be done (cats, O2 sensors, other?)
Do you mean MAP Sensor?
Chris
-
Maybe I should have explained better. I'm near the line of gwinnett county and i choose stay out.
I'm from south ga and most countries that have emissions have too much traffic. My county actually has pretty good schools. I believe kids get what they put in with school no matter where they attend. Private schools a lot of times have a better education. What makes a good school county? Grades? If so, how much has it been dumbed down? All I hear are teachers are teaching just to get kids to pass some final year test. To me that's not teaching, more along the lines of job saving. Education is not what it use to be.
-
Or you could just fix the emissions... Ya know root cause and all that...
On my TJ...I still have to find out where this mysterious MAF sensor is located!
On the White LJ...it is the mismatched engine/model_year thing, plus not knowing exactly what all would need to be done (cats, O2 sensors, other?)
Do you mean MAP Sensor?
Chris
no, I was told it was the mass air flow (MAF). A lucky Google search yielded this, which points me to the MAP sensor...time to address it: http://www.jeepforum.com/forum/f310/maf-sensor-1084165/#/forumsite/20623/topics/1084165?page=1
- Torg
-
Or you could just fix the emissions... Ya know root cause and all that...
On my TJ...I still have to find out where this mysterious MAF sensor is located!
On the White LJ...it is the mismatched engine/model_year thing, plus not knowing exactly what all would need to be done (cats, O2 sensors, other?)
Do you mean MAP Sensor?
Chris
no, I was told it was the mass air flow (MAF). A lucky Google search yielded this, which points me to the MAP sensor...time to address it: http://www.jeepforum.com/forum/f310/maf-sensor-1084165/#/forumsite/20623/topics/1084165?page=1 (http://www.jeepforum.com/forum/f310/maf-sensor-1084165/#/forumsite/20623/topics/1084165?page=1)
- Torg
I looked in shop manual and could not find a MAF sensor, was going to send you a copy of the pages on MAP sensor but could not find away to attach a pdf file.
Chris
-
Or you could just fix the emissions... Ya know root cause and all that...
On my TJ...I still have to find out where this mysterious MAF sensor is located!
On the White LJ...it is the mismatched engine/model_year thing, plus not knowing exactly what all would need to be done (cats, O2 sensors, other?)
Do you mean MAP Sensor?
Chris
no, I was told it was the mass air flow (MAF). A lucky Google search yielded this, which points me to the MAP sensor...time to address it: http://www.jeepforum.com/forum/f310/maf-sensor-1084165/#/forumsite/20623/topics/1084165?page=1 (http://www.jeepforum.com/forum/f310/maf-sensor-1084165/#/forumsite/20623/topics/1084165?page=1)
- Torg
I looked in shop manual and could not find a MAF sensor, was going to send you a copy of the pages on MAP sensor but could not find away to attach a pdf file.
Chris
I'll text you. Thanks
- Torg
-
You can attach pdf on the web
-
love living in Hall County.....
Parents moved to Hall County from Tennessee in 1966
(I was 6 years old) so just lucky by being in a county that
don't require emissions. Even thought I remember some
type of inspection when I first started driving in 1976...
-
There is no guarantee that emissions testing will not be statewide eventually.
-
There is no guarantee that emissions testing will not be statewide eventually.
yep...it's a great money maker.
- Torg
-
hey we're talking here..... //LMAO//
-
Cool in theory...
2000 Freightliner FL 106 Detroit Engine 8.5L Double Bunk Box Truck $14500
http://atlanta.craigslist.org/atl/cto/5435120938.html
-
Cool in theory...
2000 Freightliner FL 106 Detroit Engine 8.5L Double Bunk Box Truck $14500
http://atlanta.craigslist.org/atl/cto/5435120938.html
Awesome. No type of cdl needed?
-
Cool in theory...
2000 Freightliner FL 106 Detroit Engine 8.5L Double Bunk Box Truck $14500
http://atlanta.craigslist.org/atl/cto/5435120938.html
Awesome. No type of cdl needed?
Probably chauffeur's, but no clue. Just ran across it during my regular diesel search.
-
Cool in theory...
2000 Freightliner FL 106 Detroit Engine 8.5L Double Bunk Box Truck $14500
http://atlanta.craigslist.org/atl/cto/5435120938.html
Awesome. No type of cdl needed?
Probably chauffeur's, but no clue. Just ran across it during my regular diesel search.
U4 racer Derek West has something like that. Has a storage tank on board for fuel. He lives in MO. They built ramps so the car nose is close to the top but store everything nicely underneath it. Awesome set up.
-
I cringe every time I see a Freightliner truck.
Used to extrude their truck grilles for years....
High quality top of the line 6463 alloy polished
anodized aluminum. Was a pain but looked good!
-
Cool in theory...
2000 Freightliner FL 106 Detroit Engine 8.5L Double Bunk Box Truck $14500
http://atlanta.craigslist.org/atl/cto/5435120938.html (http://atlanta.craigslist.org/atl/cto/5435120938.html)
Awesome. No type of cdl needed?
Probably chauffeur's, but no clue. Just ran across it during my regular diesel search.
Would be awesome to get this thing titled as an RV, then no CDl should be needed. Not sure what that would involve though.
-
Cool in theory...
2000 Freightliner FL 106 Detroit Engine 8.5L Double Bunk Box Truck $14500
http://atlanta.craigslist.org/atl/cto/5435120938.html (http://atlanta.craigslist.org/atl/cto/5435120938.html)
Awesome. No type of cdl needed?
Probably chauffeur's, but no clue. Just ran across it during my regular diesel search.
Would be awesome to get this thing titled as an RV, then no CDl should be needed. Not sure what that would involve though.
Probably need a bathroom in it to be an RV.
-
Cool in theory...
2000 Freightliner FL 106 Detroit Engine 8.5L Double Bunk Box Truck $14500
http://atlanta.craigslist.org/atl/cto/5435120938.html (http://atlanta.craigslist.org/atl/cto/5435120938.html)
Awesome. No type of cdl needed?
Probably chauffeur's, but no clue. Just ran across it during my regular diesel search.
Would be awesome to get this thing titled as an RV, then no CDl should be needed. Not sure what that would involve though.
Probably need a bathroom in it to be an RV.
Easy. (http://uploads.tapatalk-cdn.com/20160210/b0f9e9d1231c23c51825b44ddc47c38a.jpg)
-
Both are genius.
-
What should the value of this be: http://atlanta.craigslist.org/nat/cto/5386467144.html (http://atlanta.craigslist.org/nat/cto/5386467144.html)
-
What should the value of this be: http://atlanta.craigslist.org/nat/cto/5386467144.html (http://atlanta.craigslist.org/nat/cto/5386467144.html)
I've been over it thru detailed photos, appears to be a rubi 44 front, stock suspension, salvage title, If it was auto, it's just a little high on price for me. No way with a clutch. LS is the way to go anyway.
-
Have to wonder why he doesn't have the inspection done already.
-
What should the value of this be: http://atlanta.craigslist.org/nat/cto/5386467144.html (http://atlanta.craigslist.org/nat/cto/5386467144.html)
Damnit Clark, are you gonna jump right into an LS, 60s/40s, fully built JKU? ("For overland wheeling")
-
Have to wonder why he doesn't have the inspection done already.
Yep, I thought the same thing.
What should the value of this be: http://atlanta.craigslist.org/nat/cto/5386467144.html (http://atlanta.craigslist.org/nat/cto/5386467144.html)
Damnit Clark, are you gonna jump right into an LS, 60s/40s, fully built JKU? ("For overland wheeling")
Ha! I was just looking through Craigslist and saw this thing sitting there.
What should the value of this be: http://atlanta.craigslist.org/nat/cto/5386467144.html (http://atlanta.craigslist.org/nat/cto/5386467144.html)
Damnit Clark, are you gonna jump right into an LS, 60s/40s, fully built JKU? ("For overland wheeling")
Clark just realizes he needs more room, it's ok..... :)
Truth! I can't make up my mind, so I continue to look at everything...literally everything (XJ, LJ, JL, JKU, FJ, Tacoma, 4runner, etc etc) I do think the JL is my favorite but cost concerns me.
There is a pretty kickass black JKU with some white accents with a super charger, cage, Rubicon transfer case, pr44 w/RCV, ARB, 5.38s in Woodstock, but I'm just not sure that's what I want.
- Torg
-
What should the value of this be: http://atlanta.craigslist.org/nat/cto/5386467144.html (http://atlanta.craigslist.org/nat/cto/5386467144.html)
I've been over it thru detailed photos, appears to be a rubi 44 front, stock suspension, salvage title, If it was auto, it's just a little high on price for me. No way with a clutch. LS is the way to go anyway.
Is there some non-preferential reason to not pair an LS or Hemi with a clutch? I was thinking I would go manual regardless of which vehicle I end up with next.
- Torg
-
There is a pretty kickass black JKU with some white accents with a super charger, cage, Rubicon transfer case, pr44 w/RCV, ARB, 5.38s in Woodstock, but I'm just not sure that's what I want.
- Torg
(http://uploads.tapatalk-cdn.com/20160211/467c751cc7d7241e623cffa5d22027b8.jpg)(http://uploads.tapatalk-cdn.com/20160211/f563a6756f865ce366435aab398a0473.jpg)
-
IMO, for the prices I keep seeing on the used JKU's I think it may be better to buy a new JKU Rubicon.
-
There is a pretty kickass black JKU with some white accents with a super charger, cage, Rubicon transfer case, pr44 w/RCV, ARB, 5.38s in Woodstock, but I'm just not sure that's what I want.
- Torg
(http://uploads.tapatalk-cdn.com/20160211/467c751cc7d7241e623cffa5d22027b8.jpg)(http://uploads.tapatalk-cdn.com/20160211/f563a6756f865ce366435aab398a0473.jpg)
I'd be all over this if it weren't so expensive: https://atlanta.craigslist.org/nat/cto/5429698208.html
- Torg
-
IMO, for the prices I keep seeing on the used JKU's I think it may be better to buy a new JKU Rubicon.
That's exactly why I bought new. I didn't go Rubi, but very happy with my decision. Only a few grand for warranty, new, etc.
-
IMO, for the prices I keep seeing on the used JKU's I think it may be better to buy a new JKU Rubicon.
I'm keeping that in mind. It looks like there are deals where I can get a 2012+ JKU-R for about $13k less than new but with 50k miles.
My big concern is that with a JKU I want to run 37s, but I'm concerned about the 44s not being able to handle the weight, so having to replace them immediately, especially the rear axle. Even if they aren't replaced, I should regear. It's just an ugly combination no matter which way I look at it.
- Torg
-
Start a new thread on it
-
IMO, for the prices I keep seeing on the used JKU's I think it may be better to buy a new JKU Rubicon.
I'm keeping that in mind. It looks like there are deals where I can get a 2012+ JKU-R for about $13k less than new but with 50k miles.
My big concern is that with a JKU I want to run 37s, but I'm concerned about the 44s not being able to handle the weight, so having to replace them immediately, especially the rear axle. Even if they aren't replaced, I should regear. It's just an ugly combination no matter which way I look at it.
- Torg
You're overlanding with it, right? Lots of us have run or are running 37's on 44's and doing a lot more than what you've said the JK would be used for.
Sent from my iPhone using Tapatalk
-
What should the value of this be: http://atlanta.craigslist.org/nat/cto/5386467144.html (http://atlanta.craigslist.org/nat/cto/5386467144.html)
the Burnsville hemi conversations has had nothing but problems. You would really want to get into the detail of the conversation and do an extended test drive. One of the issues was overheating. Burnsville was also beat up hard over the interwebs and still is for the craptastical customer service... which is non existent
-
What should the value of this be: http://atlanta.craigslist.org/nat/cto/5386467144.html (http://atlanta.craigslist.org/nat/cto/5386467144.html)
the Burnsville hemi conversations has had nothing but problems. You would really want to get into the detail of the conversation and do an extended test drive. One of the issues was overheating. Burnsville was also beat up hard over the interwebs and still is for the craptastical customer service... which is non existent
I wouldn't hit a dog in the ass with that rig for that price.
-
There is a pretty kickass black JKU with some white accents with a super charger, cage, Rubicon transfer case, pr44 w/RCV, ARB, 5.38s in Woodstock, but I'm just not sure that's what I want.
- Torg
I see what you did there
-
What should the value of this be: http://atlanta.craigslist.org/nat/cto/5386467144.html (http://atlanta.craigslist.org/nat/cto/5386467144.html)
I've been over it thru detailed photos, appears to be a rubi 44 front, stock suspension, salvage title, If it was auto, it's just a little high on price for me. No way with a clutch. LS is the way to go anyway.
Is there some non-preferential reason to not pair an LS or Hemi with a clutch? I was thinking I would go manual regardless of which vehicle I end up with next.
- Torg
Issue is me and a clutch
-
Will someone please buy this?
6x6 Toter/buggy hauler
http://www.hardlinecrawlers.com/forums/index.php?topic=42003
-
What should the value of this be: http://atlanta.craigslist.org/nat/cto/5386467144.html (http://atlanta.craigslist.org/nat/cto/5386467144.html)
I've been over it thru detailed photos, appears to be a rubi 44 front, stock suspension, salvage title, If it was auto, it's just a little high on price for me. No way with a clutch. LS is the way to go anyway.
Hi guys. This one is mine. It does have upgraded suspension with Elka shocks.
-
Have to wonder why he doesn't have the inspection done already.
Yep, I thought the same thing.
What should the value of this be: http://atlanta.craigslist.org/nat/cto/5386467144.html (http://atlanta.craigslist.org/nat/cto/5386467144.html)
Damnit Clark, are you gonna jump right into an LS, 60s/40s, fully built JKU? ("For overland wheeling")
Ha! I was just looking through Craigslist and saw this thing sitting there.
What should the value of this be: http://atlanta.craigslist.org/nat/cto/5386467144.html (http://atlanta.craigslist.org/nat/cto/5386467144.html)
Damnit Clark, are you gonna jump right into an LS, 60s/40s, fully built JKU? ("For overland wheeling")
Clark just realizes he needs more room, it's ok..... :)
Truth! I can't make up my mind, so I continue to look at everything...literally everything (XJ, LJ, JL, JKU, FJ, Tacoma, 4runner, etc etc) I do think the JL is my favorite but cost concerns me.
There is a pretty kickass black JKU with some white accents with a super charger, cage, Rubicon transfer case, pr44 w/RCV, ARB, 5.38s in Woodstock, but I'm just not sure that's what I want.
- Torg
It's ready for inspection now. I can walk someone through paperwork. I prefer not to spend $3K in taxes to then turn around and have the next guy do the same when it's transferred. Taxes are due immediately upon approved inspection paperwork.
-
Have to wonder why he doesn't have the inspection done already.
Dont' like double taxation. Taxes are due immediately upon approved inspection paperwork. I can do it but then have to pay $3k in taxes now and buyer has to pay same when doing the transfer.
-
What should the value of this be: http://atlanta.craigslist.org/nat/cto/5386467144.html (http://atlanta.craigslist.org/nat/cto/5386467144.html)
I've been over it thru detailed photos, appears to be a rubi 44 front, stock suspension, salvage title, If it was auto, it's just a little high on price for me. No way with a clutch. LS is the way to go anyway.
Hi guys. This is my jeep. It has new Currie RockJock 44 in front and has six inch teraflex suspension with Elka shocks. It does have salvage title but is ready for rebuilt inspection. I can do it myself but dont' think it would increase value by the amount of taxes it would take. Seems to me to make sense to let someone else buy, inspect, pay tax once only.
-
Damn, post a pic of the doors
-
What should the value of this be: http://atlanta.craigslist.org/nat/cto/5386467144.html (http://atlanta.craigslist.org/nat/cto/5386467144.html)
I've been over it thru detailed photos, appears to be a rubi 44 front, stock suspension, salvage title, If it was auto, it's just a little high on price for me. No way with a clutch. LS is the way to go anyway.
Well, Marshall posted just as I was writing a post on it. Told him to come over here if you guys had any questions on the Jeep. I bought the white half doors off him and checked out the Jeep - not bad.
Awesome on the doors!
-
What should the value of this be: http://atlanta.craigslist.org/nat/cto/5386467144.html (http://atlanta.craigslist.org/nat/cto/5386467144.html)
I've been over it thru detailed photos, appears to be a rubi 44 front, stock suspension, salvage title, If it was auto, it's just a little high on price for me. No way with a clutch. LS is the way to go anyway.
Hi guys. This is my jeep. It has new Currie RockJock 44 in front and has six inch teraflex suspension with Elka shocks. It does have salvage title but is ready for rebuilt inspection. I can do it myself but dont' think it would increase value by the amount of taxes it would take. Seems to me to make sense to let someone else buy, inspect, pay tax once only.
Since you sold the doors to Don, did the price drop by $6k //::)//
Seriously...any overheating issues with that Hemi swap?
-
Black might not look bad with all your black armor
-
Damn, post a pic of the doors
I will. Unfortunately they looked really white on the black jeep but after heading home and giving them a wash, I think they are "stone white" and my Jeep is "bright white".... going to have to get quotes on getting them sprayed which is what I didn't want to do.
You could consider running those magnetic covers like John used to have on his JK. He may still have them sitting around. @jd30005
-
Damn, post a pic of the doors
I will. Unfortunately they looked really white on the black jeep but after heading home and giving them a wash, I think they are "stone white" and my Jeep is "bright white".... going to have to get quotes on getting them sprayed which is what I didn't want to do.
Mine is Stone White.
I hate half doors, I really think they are just stupid and silly.
But I might be willing to take them off your hands :) you know, to help out a friend
-
What should the value of this be: http://atlanta.craigslist.org/nat/cto/5386467144.html (http://atlanta.craigslist.org/nat/cto/5386467144.html)
I've been over it thru detailed photos, appears to be a rubi 44 front, stock suspension, salvage title, If it was auto, it's just a little high on price for me. No way with a clutch. LS is the way to go anyway.
Hi guys. This is my jeep. It has new Currie RockJock 44 in front and has six inch teraflex suspension with Elka shocks. It does have salvage title but is ready for rebuilt inspection. I can do it myself but dont' think it would increase value by the amount of taxes it would take. Seems to me to make sense to let someone else buy, inspect, pay tax once only.
Since you sold the doors to Don, did the price drop by $6k //::)//
Seriously...any overheating issues with that Hemi swap?
No issues with overheating. It does fine on the road and off.
-
http://yuma.craigslist.org/cto/5425919973.html
-
http://yuma.craigslist.org/cto/5425919973.html
only 3 crappy pictures!!!
- Torg
-
He just posted those, he had none for awhile, hes a rich guy and no it skills lol.
If you were looking at building a rig right now save some change and grab this wow
-
Bad ass only negative it's a manual
-
Orange. Can't do Orange. No Orange. I guess it would be easier to paint it than move everything over to the red jeep.
The value is there. No doubt.
-
That's quite a rig.
-
Most photos don't catch the intensity of the situation, but I think this one does: (http://images.craigslist.org/00q0q_9pyVyr4HuiZ_600x450.jpg)
-
Does anyone have a soft top frame that fit a 1995 yj for sale.just realized mine was broke. Thanks guys.
-
Two ammo cans at Costco for $20. One 50 cal and then a smaller one.
- Torg
-
Metal? Get them. Everyone else is $20 for just the 50, then there's shipping.
-
Metal? Get them. Everyone else is $20 for just the 50, then there's shipping.
metal. I doubt they're military grade. I passed on them since I have so many already, but I paid roughly what you stated, so these seem like a good deal.
- Torg
-
Man I remember growing up they were less than $5 for surplus. Dang.
So long ago lol
-
http://www.pirate4x4.com/forum/showthread.php?t=1996610
-
I saw that and my initial reaction was a couple curse words. Then I read it and realized they are too short for a jk at only 68" inches, wrong lockers for me, and there has got to be something fishy going on if the guy has held them for a year and been unable to sell them.
I thought JKU was 65.5"
- Torg
-
You really need about 70" with 3.5" bs to fully free turn MTR 40s at stuff free of the frame on a JK. I had the 68.75" and we added some steer bump to keep the tires off of the frame.
-
https://columbia.craigslist.org/cto/5471780532.html
LJ
-
i was like whoa wtf... then ahha.. rebuilt.. still a good deal tho fo the man that wants to one ton her
-
Mad 30s yo!
http://atlanta.craigslist.org/atl/cto/5521222747.html
-
Poor Jeep.
-
Mad 30s yo!
http://atlanta.craigslist.org/atl/cto/5521222747.html
Really loving the fact that it's a for sale ad that doesn't mention the vehicle year. Attention to detail right there!
Sent from my iPhone using Tapatalk
-
Mad 30s yo!
http://atlanta.craigslist.org/atl/cto/5521222747.html
Really loving the fact that it's a for sale ad that doesn't mention the vehicle year. Attention to detail right there!
Sent from my iPhone using Tapatalk
if you're worried about the year, considering it has 30s, yo, then your priorities is out of whack, yo.
- Torg
-
Mad 30s yo!
http://atlanta.craigslist.org/atl/cto/5521222747.html (http://atlanta.craigslist.org/atl/cto/5521222747.html)
Really loving the fact that it's a for sale ad that doesn't mention the vehicle year. Attention to detail right there!
Sent from my iPhone using Tapatalk
if you're worried about the year, considering it has 30s, yo, then your priorities is out of whack, yo.
- Torg
I'd be most worried about:
1. Driving to that 'hood to look at it
2. Removing Jheri Curl stains from seats
3. Getting rid of the smell from the stack of Christmas tree air fresheners.
-
Mad 30s yo!
http://atlanta.craigslist.org/atl/cto/5521222747.html (http://atlanta.craigslist.org/atl/cto/5521222747.html)
Really loving the fact that it's a for sale ad that doesn't mention the vehicle year. Attention to detail right there!
Sent from my iPhone using Tapatalk
if you're worried about the year, considering it has 30s, yo, then your priorities is out of whack, yo.
- Torg
I'd be most worried about:
1. Driving to that 'hood to look at it
2. Removing Jheri Curl stains from seats
3. Getting rid of the smell from the stack of Christmas tree air fresheners.
If it were possible to offend him, Will ( @94xjsport94 ) would be offended by that worry.
-
I thought that was Big Mike's Jeep till I saw his avatar. His is just silver!
He's right, Christmas tree air fresheners are too much. If my baby XJ was burgundy I'd buy those wheels.
-
Must be an inside joke
-
(http://uploads.tapatalk-cdn.com/20160405/aebebe1c64e89b71fafb0304f648def1.jpg)
Got a few of those fresh airs up in that thang.
-
http://sandiego.craigslist.org/esd/cto/5524130820.html (http://sandiego.craigslist.org/esd/cto/5524130820.html)
-
http://sandiego.craigslist.org/esd/cto/5524130820.html (http://sandiego.craigslist.org/esd/cto/5524130820.html)
my jaded opinion...no TJ or LJ is worth over $20K unless it has big axles and 40's
-
no your spot on Tony......
Hell I read that and thought except for the
transfer case....sounded about like mine
-
But it comes with a fancy Starbucks coffee sleeve. Gotta be worth it!
-
He wants his labor money back... //:o// And he outboarded the shocks but left the stock location for the springs??? Makes no sense.
-
Barnes has 10% off thru the weekend. I always have bad timing when I order from them and miss the discounts.
Coupon Code: CC0416
-
Barnes has 10% off thru the weekend. I always have bad timing when I order from them and miss the discounts.
Coupon Code: CC0416
I always just call if I need something. Brad will usually give you the 10% on phone orders
-
Truth
(http://uploads.tapatalk-cdn.com/20160410/09529b56f29f96873f8fd8e61e0e8f6a.jpg)
-
Shopping local, and small business are not synonymous, but I get the point, and generally agree.
For the record, my CEO has 4 homes...and I'm cool with that.
Sent from my XT1254 using Tapatalk
-
This is one of those things that just seems right to agree with. But local places need to still earn my business by having good selections, at good prices, that are in stock, and that are convenient for me to consume. Competition is a bitch, and Amazon makes it tough!
Sent from my iPhone using Tapatalk
-
What gets me is people that go to a local shop, offroad, guns, camping or whatever to view and get their hands on products then go purchase it online. These businesses have an investment in keeping things in stock for us to come fondle.
Sent from my SM-G860P using Tapatalk
-
I like using local company's cause they let me wander around in the back and ask stupid questions
-
I like using local company's cause they let me wander around in the back and ask stupid questions
In return for donuts?
-
I like using local company's cause they let me wander around in the back and ask stupid questions
In return for donuts?
(https://i.imgflip.com/jf0e4.jpg)
-
Well yes I do have to provide some kind of reward for my annoying behavior. Un like some others who shall remain nameless
-
I generally on do donuts when i come in the morning and stay. this time I am leaving the jeep at allsouth Wed.afternoon , the Tech's like Krispy Kreme I may do that for another install i have coming later. I will let you know in advance so u can have some. but , u need to get their early 2 boxes only go so far.
-
Falcon Stickies..walk boat ramp!
http://www.hardlinecrawlers.com/forums/index.php?topic=51043.0
Tires and wheels in jasper...I'd grab them if I thought they'd fit.
http://www.hardlinecrawlers.com/forums/index.php?topic=51029.0
Sent from my XT1254 using Tapatalk
-
Built TJ.
http://www.hardlinecrawlers.com/forums/index.php?topic=51033.0
Sent from my XT1254 using Tapatalk
-
One of a kind rig
https://denver.craigslist.org/cto/5536505861.html
-
LJ anybody?
http://www.hardlinecrawlers.com/forums/index.php?topic=51082.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=51082.0)
-
@TCDawg $8950!
Sent from my iPhone using Tapatalk
-
LJ anybody?
http://www.hardlinecrawlers.com/forums/index.php?topic=51082.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=51082.0)
Damn... should have put my new axles under that.
-
@tcdawg $8950!
Sent from my iPhone using Tapatalk
that LJ has been on and off forums for sale for quite awhile. something must be wrong with it but not sure what
And...I am out of the LJ search. The 4 door rock limo is my wheeler for now
-
http://atlanta.craigslist.org/wat/tls/5553429558.html (http://atlanta.craigslist.org/wat/tls/5553429558.html)
seems like a pretty good deal for a smaller rig.
-
http://atlanta.craigslist.org/wat/tls/5553429558.html (http://atlanta.craigslist.org/wat/tls/5553429558.html)
seems like a pretty good deal for a smaller rig.
M8000 is a darn good winch. I have used one for about 5 years and made some hard pulls w it. Never let me down.
The Warns can be rebuilt as well...that one looks like it needs some love.
-
http://products.fc4x4.com/garage-sale/raceline-wheels-monster-beadlock-aluminum-rt-231-st/ (http://products.fc4x4.com/garage-sale/raceline-wheels-monster-beadlock-aluminum-rt-231-st/)
-
http://www.daveysjeeps.com/repairables/R302680.html (http://www.daveysjeeps.com/repairables/R302680.html)
-
http://atlanta.craigslist.org/atl/cto/5609821032.html (http://atlanta.craigslist.org/atl/cto/5609821032.html)
bring it back down to earth a bit and you would be set!
-
@tcdawg
http://www.daveysjeeps.com/repairables/R384799.html (http://www.daveysjeeps.com/repairables/R384799.html)
(http://www.daveysjeeps.com/repairables/images/R384799/pic1.gif)
-
@tcdawg
http://www.daveysjeeps.com/repairables/R384799.html (http://www.daveysjeeps.com/repairables/R384799.html)
(http://www.daveysjeeps.com/repairables/images/R384799/pic1.gif)
am i missing the price somewhere?
-
@tcdawg
http://www.daveysjeeps.com/repairables/R384799.html (http://www.daveysjeeps.com/repairables/R384799.html)
(http://www.daveysjeeps.com/repairables/images/R384799/pic1.gif)
am i missing the price somewhere?
Prices are on the list page here $7850
http://www.daveysjeeps.com/repairables.html (http://www.daveysjeeps.com/repairables.html)
-
Now that I have a new daily driver and my JKR is kinda-sorta for sale, I'm buying that if I get the right price for my '14 Rubicon and it's still available.
-
You can find a deal on LJ's if your ready to "pounce" as soon as you find one. Luckily I only searched for about 3 weeks. I ended up giving under $9,000 for my 06. It had a hard top, Warn 9500ti winch, ARB front bumper, 2" lift, 4.56 gears, and a locker in the front. (at the time of purchase I nor the previous owner new about the re-gear and locker) BONUS!!! It was owned by an older gentleman in Mid GA. I'm guessing the original owner outfit it for expo style wheeling and never used it. There wasn't a single scratch anywhere. I was very close to buying one from Daveys when I found this one.
-
ATTN: @Jeeptrk... here's your chance!
http://atlanta.craigslist.org/sat/cto/5624887769.html (http://atlanta.craigslist.org/sat/cto/5624887769.html)
-
ATTN: @Jeeptrk... here's your chance!
http://atlanta.craigslist.org/sat/cto/5624887769.html (http://atlanta.craigslist.org/sat/cto/5624887769.html)
HAATTN: @Jeeptrk... here's your chance!
http://atlanta.craigslist.org/sat/cto/5624887769.html (http://atlanta.craigslist.org/sat/cto/5624887769.html)
HA!! thats awesome, i appreciate it!! sent him a text waiting on pics now
-
Good deal on harnesses on hardline
(http://uploads.tapatalk-cdn.com/20160616/1b345d10ccd0425508168bd796891646.jpg)
-
anyone looking for a sweet YJ trail rig
http://www.hardlinecrawlers.com/forums/index.php?topic=51703.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=51703.0)
-
anyone looking for a sweet YJ trail rig
http://www.hardlinecrawlers.com/forums/index.php?topic=51703.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=51703.0)
Damn thats nice!
-
anyone looking for a sweet YJ trail rig
http://www.hardlinecrawlers.com/forums/index.php?topic=51703.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=51703.0)
I'd consider that rig if I was in the market.
-
Very nice YJ.
-
That is awesome
Sent from my iPhone using Tapatalk
-
http://atlanta.craigslist.org/nat/tls/5656666650.html (http://atlanta.craigslist.org/nat/tls/5656666650.html)
NO price listed but if you're looking for a shop lift here's a few for sale.
-
http://atlanta.craigslist.org/nat/tls/5656666650.html (http://atlanta.craigslist.org/nat/tls/5656666650.html)
NO price listed but if you're looking for a shop lift here's a few for sale.
[/quote
Wish I the overhead clearance!
-
Bomber chassis are now avaliable in DOM.
-
LMAO, great ad
My cousins says his 900hp viper tried to kill him, this one must be fast....
http://providence.craigslist.org/cto/5607257677.html
There is more, open it
That's why I'm telling you. I will not have your soul on my conscience.
You need to know what you are getting into. What insane level of crazy you are buying.
Can you resist the urge to mash down the accelerator? Can you? Because it's like owning your own demon. A demon that wants to kill you. We all know one person that for the right amount of money would kill you. But since no one is paying, they smile in your face and go about their day.
It's like that except the Viper doesn't bother to ever pretend it doesn't want to kill you.
And it will do it for free.
-
LMAO, great ad
My cousins says his 900hp viper tried to kill him, this one must be fast....
http://providence.craigslist.org/cto/5607257677.html (http://providence.craigslist.org/cto/5607257677.html)
There is more, open it
That's why I'm telling you. I will not have your soul on my conscience.
You need to know what you are getting into. What insane level of crazy you are buying.
Can you resist the urge to mash down the accelerator? Can you? Because it's like owning your own demon. A demon that wants to kill you. We all know one person that for the right amount of money would kill you. But since no one is paying, they smile in your face and go about their day.
It's like that except the Viper doesn't bother to ever pretend it doesn't want to kill you.
And it will do it for free.
Hysterical, thanks for sharing...
-
Yeah, best Craigslist or car ad I've ever read!
Sent from my iPhone using Tapatalk
-
Great ad. My Favorite line "Different bowl of crack".
-
I'm actually pasting the whole thing here so I can come back and read it after the ad's taken down.
2001 dodge viper convertible
VIN: 1B3er65e91v701449
cylinders: 10 cylinders
drive: rwd
fuel: gas
odometer: 11400
paint color: black
title status: rebuilt
transmission: manual
type: convertible
Okay. Full disclosure. I almost killed myself in it.
It is VERY powerful. Extremely, EXTREMELY fast.
I've driven Ferrari's that don't feel as crazy as this thing. I am frankly afraid of it now.
That's right. It's in my garage and I'm afraid to drive it because it's like a crazy steroid bull that wants to kill me.
I've done 130 mph on a Ducati while laughing into the face of death. The viper is a completely different bowl of crack. The engine sounds like 40 pit bulls eating kittens while lifting weights.
I cannot truly explain it's power. It has whiplash acceleration in 3rd gear at 50mph. That sentence doesn't even make sense. But it's true.
That's why I'm telling you. I will not have your soul on my conscience.
You need to know what you are getting into. What insane level of crazy you are buying.
Can you resist the urge to mash down the accelerator? Can you? Because it's like owning your own demon. A demon that wants to kill you. We all know one person that for the right amount of money would kill you. But since no one is paying, they smile in your face and go about their day.
It's like that except the Viper doesn't bother to ever pretend it doesn't want to kill you.
And it will do it for free.
Some brilliant engineer designed a beautiful sexy bulging body, fantastic suspension, great handling, aerodynamics, and all American style. While he was out on his lunch break, some demented maniac dropped 100 times more engine power than necessary into it and sent it out the door. It's mentally unbalanced.
Look,
If you are the type of person that can be talked into having one more drink at midnight when you have a very important presentation or interview early the next morning, then the Viper is not for you.
The whole car is constantly whispering sweet lies to you.
"You got this".
"Open me up and ride free, you got this"
"What are you a pussy?"
"Just do it", "Do it", "you got this".
Do not do it. You don't got it. You ARE in fact a pussy. And as we all know, pussy is mad good. But not that good.
You will sit on the curb and settle your heart after it tries to kill you the first time.
You will get back inside and it will immediately get back to the business of trying to get you to let it murder you.
"You got this. This time you know. That last time was just a fluke. You ain't no pussy".
Repeat after me.
You
Don't
Got
This.
But for $30k you can look the devil in the eye and take this ride.
You were warned.
Sent from my iPhone using Tapatalk
-
Good move JC...they are pulling the ad.
-
LMAO, great ad
My cousins says his 900hp viper tried to kill him, this one must be fast....
http://providence.craigslist.org/cto/5607257677.html (http://providence.craigslist.org/cto/5607257677.html)
There is more, open it
That's why I'm telling you. I will not have your soul on my conscience.
You need to know what you are getting into. What insane level of crazy you are buying.
Can you resist the urge to mash down the accelerator? Can you? Because it's like owning your own demon. A demon that wants to kill you. We all know one person that for the right amount of money would kill you. But since no one is paying, they smile in your face and go about their day.
It's like that except the Viper doesn't bother to ever pretend it doesn't want to kill you.
And it will do it for free.
I drove the same model Viper all last week and can attest that it is one heck of a beast. I hit 60mph in 2nd and still had 4 more gears to go...
-
I sent the ad to Kell so she could laugh. She sent me an email that stated, "No."
-
I sent the ad to Kell so she could laugh. She sent me an email that stated, "No."
Did you buy it just to put her in her place?
Sent from my iPhone using Tapatalk
-
I sent the ad to Kell so she could laugh. She sent me an email that stated, "No."
Did you buy it just to put her in her place?
Sent from my iPhone using Tapatalk
I really don't want a rebuilt title on a demon controlled vehicle.
Sent from my XT1254 using Tapatalk
-
That sh't is funny!
-
GATR West clubhouse? @jc79
https://denver.craigslist.org/off/5618640929.html
CORE fees are going up fellas! That's awesome and seems like a decent price too.
Sent from my iPhone using Tapatalk
-
GATR West clubhouse? @jc79
https://denver.craigslist.org/off/5618640929.html
CORE fees are going up fellas! That's awesome and seems like a decent price too.
Sent from my iPhone using Tapatalk
get on it, player!
-
Thanks for getting that for us Jared!!
Sent from my iPhone using Tapatalk
-
Pretty solid price on quality cutoff disks: https://www.amazon.com/Makita®-10-Pack-Abrasive-Stainless/dp/B019QYUFX2
Sent from my XT1254 using Tapatalk
-
Help for Clar in posting:
https://www.amazon.com/Makita-10-Pack-Abrasive-Stainless/dp/B019QYUFX2 (https://www.amazon.com/Makita-10-Pack-Abrasive-Stainless/dp/B019QYUFX2)
-
V8 6.0
LJ
https://atlanta.craigslist.org/nat/cto/5676641143.html
-
V8 6.0
LJ
https://atlanta.craigslist.org/nat/cto/5676641143.html
Nice!
If this guy had big axles, I guarantee this jeep would drive @tcdawg nuts for at least three weeks or until it sold. Either way, he wouldn't end up pulling the trigger.
Sent from my iPhone using Tapatalk
-
Oh if I was in the right spot right now... 6.0 LJ sweeeet
-
Or you can have a JK Hemi for $29k
http://www.jkowners.com/forum/sale-jeeps-any-model/313898-2007-jeep-wrangler-unlimited-5-7l-hemi-powered.html (http://www.jkowners.com/forum/sale-jeeps-any-model/313898-2007-jeep-wrangler-unlimited-5-7l-hemi-powered.html)
-
Or you can have a JK Hemi for $29k
http://www.jkowners.com/forum/sale-jeeps-any-model/313898-2007-jeep-wrangler-unlimited-5-7l-hemi-powered.html (http://www.jkowners.com/forum/sale-jeeps-any-model/313898-2007-jeep-wrangler-unlimited-5-7l-hemi-powered.html)
That would make a great start but as she stands she's but ugly and needs alot to be a true trail rig.
-
'Custom' dash, no emissions, fab tech suspension, stock axles... Lot of rework to be done and axle swap.
yep, too much to do to make it baller
@Raisinhead you are right though, big axles on this would set me on fire
-
Off Road Trailers
https://atlanta.craigslist.org/sat/rvs/5686120507.html
https://atlanta.craigslist.org/wat/rvs/5685791214.html
https://atlanta.craigslist.org/atl/rvs/5656489794.html
-
Off Road Trailers
https://atlanta.craigslist.org/sat/rvs/5686120507.html
https://atlanta.craigslist.org/wat/rvs/5685791214.html
https://atlanta.craigslist.org/atl/rvs/5656489794.html
Man, that first one is sweet.
-
If my trailer was bigger I'd be bolting that on the front half
-
For @Jeeptrk
http://www.pirate4x4.com/forum/misc-stuff-sale/2359753-jeep-4-0-high-performance-parts.html (http://www.pirate4x4.com/forum/misc-stuff-sale/2359753-jeep-4-0-high-performance-parts.html)
thanks @BigPrince !!
-
https://www.rockcrawlersforsale.com/autos/jeep/2005-jeep-wrangler-lj-unlimited-666.html (https://www.rockcrawlersforsale.com/autos/jeep/2005-jeep-wrangler-lj-unlimited-666.html)
nice to know I'm not the only one that looks at the website every day
-
dang them tires looked skinny
-
Perfect trail rig. LJ Rubicon, 60k miles. $13,900
http://www.ebay.com/itm/142073791190?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT (http://www.ebay.com/itm/142073791190?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT)
-
Perfect trail rig. LJ Rubicon, 60k miles. $13,900
http://www.ebay.com/itm/142073791190?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT (http://www.ebay.com/itm/142073791190?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT)
I know what he meant, but it made me look back at the pics. Haha
(http://uploads.tapatalk-cdn.com/20160803/a726aa5fa609f6c383b53c411043643a.png)
Sent from my iPhone using Tapatalk
-
Jeep LJ for CHEAP!!!!
http://charlotte.craigslist.org/cto/5724945224.html (http://charlotte.craigslist.org/cto/5724945224.html)
-
Jeep LJ for CHEAP!!!!
http://charlotte.craigslist.org/cto/5724945224.html (http://charlotte.craigslist.org/cto/5724945224.html)
Wow somebody should grab that.
-
Paging @tcdawg
-
Paging @tcdawg
I have a email in to the dude
dammit. I thought it said Canton...it says Charlotte. F me
-
Paging @tcdawg
I have a email in to the dude
dammit. I thought it said Canton...it says Charlotte. F me
LS, tons and 43's since you have to go one notch bigger than everybody else and a cage = Bad Ass
Sent from my iPhone using Tapatalk
-
Jeep LJ for CHEAP!!!!
http://charlotte.craigslist.org/cto/5724945224.html (http://charlotte.craigslist.org/cto/5724945224.html)
scam? Too cheap to be true...or so it seems.
-
damn ain't that a Georgia tag?
-
Sure is Fulton county tag
Sent from my iPhone using Tapatalk
-
(http://i898.photobucket.com/albums/ac182/tjsahara00/misc/LJ%204%20sale_zpskcwq4fwm.jpg) (http://s898.photobucket.com/user/tjsahara00/media/misc/LJ%204%20sale_zpskcwq4fwm.jpg.html)
-
(http://i898.photobucket.com/albums/ac182/tjsahara00/misc/LJ%204%20sale_zpskcwq4fwm.jpg) (http://s898.photobucket.com/user/tjsahara00/media/misc/LJ%204%20sale_zpskcwq4fwm.jpg.html)
Has an NC State tag on the front
-
On the eBay LJ...
THIS VEHICLE WILL BE SOLD WITH A BILLOF SALE AND THE ORIGINAL PAPERWORK FROM FLORIDA, MY STATE WILL ALLOW ME TO TITLE IT BUT WITH THE Florida certificate of destruction I need to just change one major item. FOR ME IT DOESN'T MATTER AS A BUILT OFF ROAD MACHINE IT WILL BE HAULED TO THE EVENTS. YOUR STATE MY BE DIFFERENT OR YOU MY FEEL LIKE I DO
-
(http://i898.photobucket.com/albums/ac182/tjsahara00/misc/LJ%204%20sale_zpskcwq4fwm.jpg) (http://s898.photobucket.com/user/tjsahara00/media/misc/LJ%204%20sale_zpskcwq4fwm.jpg.html)
Has an NC State tag on the front
I emailed the guy and he lives near my ex-inlaws. He has a Raleigh (NC State) cell number.
-
That's a once in a year or so deal. Pass it up now and wait another 12-18 months for one to pop up.
Sent from my iPhone using Tapatalk
-
(http://i898.photobucket.com/albums/ac182/tjsahara00/misc/LJ%204%20sale_zpskcwq4fwm.jpg) (http://s898.photobucket.com/user/tjsahara00/media/misc/LJ%204%20sale_zpskcwq4fwm.jpg.html)
Has an NC State tag on the front
I emailed the guy and he lives near my ex-inlaws. He has a Raleigh (NC State) cell number.
He can't sell it for 1 to 3 weeks - depends on him getting his father in law's truck.
They just moved to Charlotte from Atlanta.
-
That's a once in a year or so deal. Pass it up now and wait another 12-18 months for one to pop up.
Sent from my iPhone using Tapatalk
X2......
-
(http://i898.photobucket.com/albums/ac182/tjsahara00/misc/LJ%204%20sale_zpskcwq4fwm.jpg) (http://s898.photobucket.com/user/tjsahara00/media/misc/LJ%204%20sale_zpskcwq4fwm.jpg.html)
Has an NC State tag on the front
I emailed the guy and he lives near my ex-inlaws. He has a Raleigh (NC State) cell number.
He can't sell it for 1 to 3 weeks - depends on him getting his father in law's truck.
They just moved to Charlotte from Atlanta.
So, did you tell him you would buy it in 3 weeks? Did you get any details on it?
-
(http://i898.photobucket.com/albums/ac182/tjsahara00/misc/LJ%204%20sale_zpskcwq4fwm.jpg) (http://s898.photobucket.com/user/tjsahara00/media/misc/LJ%204%20sale_zpskcwq4fwm.jpg.html)
Has an NC State tag on the front
I emailed the guy and he lives near my ex-inlaws. He has a Raleigh (NC State) cell number.
He can't sell it for 1 to 3 weeks - depends on him getting his father in law's truck.
They just moved to Charlotte from Atlanta.
So, did you tell him you would buy it in 3 weeks? Did you get any details on it?
Didn't get details but I have his number to call him. I really did it to see if the deal was real. Something would have to go if I bought this "project" - the Mercedes or my JKR.
-
I wish i had enough spare $$$ and I would have bought it instead of posting it haha...
-
send a deposit, get his father in laws number too
-
Its not in the cards for me at the moment... hopefully someone here can snatch it.
@tcdawg
or
@BigMike
-
http://www.youngcons.com/epic-if-this-isnt-the-most-american-craigslist-ad-i-have-ever-seen-i-dont-know-what-is/ (http://www.youngcons.com/epic-if-this-isnt-the-most-american-craigslist-ad-i-have-ever-seen-i-dont-know-what-is/)
-
Saw this on the PBB and thought it was funny... Look at the name on the check. Dumb scam artists...
http://www.pirate4x4.com/forum/general-chit-chat/2374121-i-scammed-scammer-6-a.html (http://www.pirate4x4.com/forum/general-chit-chat/2374121-i-scammed-scammer-6-a.html)
-
No price listed. But for $1, sure... 6.2 LS3 LJ with D44 axles?
http://atlanta.craigslist.org/sat/cto/5732617481.html (http://atlanta.craigslist.org/sat/cto/5732617481.html)
-
No price listed. But for $1, sure... 6.2 LS3 LJ with D44 axles?
http://atlanta.craigslist.org/sat/cto/5732617481.html (http://atlanta.craigslist.org/sat/cto/5732617481.html)
I'd double his asking price to $2, even.
-
No price listed. But for $1, sure... 6.2 LS3 LJ with D44 axles?
http://atlanta.craigslist.org/sat/cto/5732617481.html (http://atlanta.craigslist.org/sat/cto/5732617481.html)
No price listed. But for $1, sure... 6.2 LS3 LJ with D44 axles?
http://atlanta.craigslist.org/sat/cto/5732617481.html (http://atlanta.craigslist.org/sat/cto/5732617481.html)
I'd double his asking price to $2, even.
Here you go. Only asking about 15k too much imo
(http://uploads.tapatalk-cdn.com/20160815/df651053d4f094cef8f327bdc7c2483b.jpg)
Sent from my iPhone using Tapatalk
-
*Gulp!* I was gonna guess north of $40k, though.
-
You'd never need that much motor for those tires and axles, though, is the problem. V8 & 60s makes more sense, but he just drives it on the beach, though.
-
You'd never need that much motor for those tires and axles, though, is the problem. V8 & 60s makes more sense, but he just drives it on the beach, though.
I was thinking the same.
Sent from my iPhone using Tapatalk
-
I'm currently #6 in line to buy this gem...
http://atlanta.craigslist.org/nat/cto/5691817442.html (http://atlanta.craigslist.org/nat/cto/5691817442.html)
//LMAO//
-
It has one too many 9s in the price.
-
No I think he's just smoking something. Look at the link he posted about it potentially being worth over 20k...
Sent from my iPhone using Tapatalk
-
I thought this thread was about Good Deals? //LMAO//
-
I thought this thread was about Good Deals? //LMAO//
It is a good deal...for the seller.
Sent from my iPhone using Tapatalk
-
@tcdawg
http://www.daveysjeeps.com/repairables/R774455.html
-
@tcdawg
http://www.daveysjeeps.com/repairables/R774455.html
I have decided not to get into a build. Anymore building will be done on my current Jeep.
I haven't totally given up on buying something already built though, always got my eye open. Looked at one in Cherokee, NC last week but it turned out to be in rough shape.
-
I saw it to. Hes asking 45K
-
Massive tow pig
http://www.merlinautogroup.com/1991-custom-am-general-semi-truck-custom-semi-truck-c-68.htm
-
If I was into the overland stuff, I would want something like this with beefy axles.
http://atlanta.craigslist.org/atl/cto/5845049417.html (http://atlanta.craigslist.org/atl/cto/5845049417.html)
-
Massive tow pig
http://www.merlinautogroup.com/1991-custom-am-general-semi-truck-custom-semi-truck-c-68.htm (http://www.merlinautogroup.com/1991-custom-am-general-semi-truck-custom-semi-truck-c-68.htm)
Call for price = it cost too much
-
i like pitbulls but for a daily driver its not the best selection. if u run these, i would borrow and get a set, thats a deal that cant be beat.
-
HOLY SHIT HOLY SHIT
PITBULL JUST POSTED A 50% COUPON ON THEIR SITE - 50DRAINTHESWAMP2416
ONLY GOOD TODAY, JUST TRIED IT AND IT WORKS - fawk I MIGHT JUST BUY A SPARE SET
You're going bigger, don't need I'm, 43 stickies
Sent from my Pixel XL using Tapatalk
-
37x1250R17LT/E - ROCKER XOR LT RADIAL would this be what i order?
-
HOLY SHIT HOLY SHIT
PITBULL JUST POSTED A 50% COUPON ON THEIR SITE - 50DRAINTHESWAMP2416
ONLY GOOD TODAY, JUST TRIED IT AND IT WORKS - fawk I MIGHT JUST BUY A SPARE SET
Damn it. Just after I buy those irocs.....
Sent from my SM-N930V using Tapatalk
-
Just saw this CJ-5 in Austell. Have not called. Looks like a project. Could be Dons new hunting rig.
-
Don in a 5?
What's he gonna do, rip the front seats out & drive form the back seat?
-
I consider this a reasonable deal.
http://greensboro.craigslist.org/cto/5860889971.html
-
I consider this a reasonable deal.
http://greensboro.craigslist.org/cto/5860889971.html
I like it
-
hrmmm
http://www.hardlinecrawlers.com/forums/index.php?topic=53892.0;topicseen (http://www.hardlinecrawlers.com/forums/index.php?topic=53892.0;topicseen)
The propane tank in the back surprises me.
-
hrmmm
http://www.hardlinecrawlers.com/forums/index.php?topic=53892.0;topicseen (http://www.hardlinecrawlers.com/forums/index.php?topic=53892.0;topicseen)
The propane tank in the back surprises me.
Must be haulin it for a buddy?
"only reason I am getting rid of it is because I don't want to trash it like a buggy"
Too nice to buy to wheel.
-
Nice rig right there and a fair/good price in my mind.
Sent from my iPhone using Tapatalk
-
Nice rig right there and a fair/good price in my mind.
Sent from my iPhone using Tapatalk
You're killing me Smalls
-
Nice rig right there and a fair/good price in my mind.
Sent from my iPhone using Tapatalk
X2.
-
Nice rig right there and a fair/good price in my mind.
Sent from my iPhone using Tapatalk
You're killing me Smalls
Interested in selling that JKU...now!!!
-
Nice rig right there and a fair/good price in my mind.
Sent from my iPhone using Tapatalk
You're killing me Smalls
Interested in selling that JKU...now!!!
Funny you should mention that
-
Question for the group. When Tony takes possession of this, does he gain entrance to the LJ club? I mean, it is technically a TJ but you wouldn't know by looking.
Sent from my iPhone using Tapatalk
-
Question for the group. When Tony takes possession of this, does he gain entrance to the LJ club? I mean, it is technically a TJ but you wouldn't know by looking.
Sent from my iPhone using Tapatalk
Tell him he will, then deny him after it's in his possession
-
(http://uploads.tapatalk-cdn.com/20161114/cd83a191372278c58c91b370f4778dc3.jpg)
Trolling and saw this though I would share
Sent from my SM-N910V using Tapatalk
-
Question for the group. When Tony takes possession of this, does he gain entrance to the LJ club? I mean, it is technically a TJ but you wouldn't know by looking.
Sent from my iPhone using Tapatalk
Tell him he will, then deny him after it's in his possession
(http://m.quickmeme.com/img/dd/dda25cacad81cbf1f4123aa71a0a28197f625b0a604e9b6ca5914f5ce98ef26d.jpg)
mean, mean, mean
-
http://www.hardlinecrawlers.com/forums/index.php?topic=52871.0;topicseen (http://www.hardlinecrawlers.com/forums/index.php?topic=52871.0;topicseen)
$4500 for a XJ with a 4 sod atlas is a pretty good deal. Do the super duty axle swap yourself for about $4K and have a nice trail rig.
@Big Dave
-
I have my eye on the Terra Low 4 to 1. I think I can have SD put in cheaper than $4000. I haven't really sat down & priced it but I'm in no hurry. I'm still getting used to & having fun with my curret axles. Plus, the '00 is notorious for having bad head issues. Easy fix is to swap in a older head. Just make sure that it is not already cracked & ruined the main bearings.
-
The terra low 4 to 1s are complete garbage.
Sent from my SM-N930V using Tapatalk
-
It's the one with the new front case half?
What's a good alternative?
-
I hear ya Dave. With the price that people are paying for SD axles I am convinced I could put a set under my truck (if I still had Toyota axles) for $3000 to $4000, but that's with regear and lockers (I don't do welded axles).
-
I'm used to a welded rear, it doesn't bother me. I'd opt for a front selectable. Again, no rush. If I start demolishing shafts I'll rethink my strategy.
-
It's the one with the new front case half?
What's a good alternative?
I have personally watched two of them explode in the woods. Neither person was beating on thier rig at all. Both units got replaced under warranty but both where told that they would not be repalced again. I think there is an extremely low rpm limit on the teralow kit. 241OR......................
-
I wish, they are 23 spline input & mine is 21 spline. They are pricey too.
-
It's the one with the new front case half?
What's a good alternative?
I have personally watched two of them explode in the woods. Neither person was beating on thier rig at all. Both units got replaced under warranty but both where told that they would not be repalced again. I think there is an extremely low rpm limit on the teralow kit. 241OR......................
No way in hell should you consider the terra junk.
I believe one guy in this forum busted one, it was repaired, and then the next owner busted it. The biggest problem, from what I understand, is the RPM limit in low, which makes going from trail head to trail head a real PITA, so most people end up breaking them; The design just isn't practical for what we do.
-
Good info, I had no idea of the issues they had. Thanks guys, I'll keep looking.
-
D&D machine used to make a bunch of double kits.
Sent from my SM-N930V using Tapatalk
-
Found them on Pirate but they are not around anymore. I'll look into getting a newer XJ transmission & 231OR t case or swapping in a 23 spline output shaft in my transmission.
-
Found them on Pirate but they are not around anymore. I'll look into getting a newer XJ transmission & 231OR t case or swapping in a 23 spline output shaft in my transmission.
I will have the transfer case out of my 2000 available soon.
Sent from my iPhone using Tapatalk
-
What t case do you have?
-
What t case do you have?
Not positive, think it's a 231. I will let you know for sure when it's pulled
Sent from my iPhone using Tapatalk
-
Looking for 4 to 1 geared t case.
-
https://www.summitracing.com/parts/tjm-077atfta36z/overview/ (https://www.summitracing.com/parts/tjm-077atfta36z/overview/)
-
Anything jumping out at y'all for Black Friday?
Not listing all the sales ads I've looked at so far. Nothing jumping out at me yet. May look at VKS's sale but that's the only one I'm interested in so far. Gun sales are not impressive so far.
AllSouth doing anything for Black Friday?? :)
Maybe we should have a dedicated thread, like we have done for the last couple of years.
To answer your question, I've seen nothing special, yet. I'm not in the market for anything at this time, so it would take something truly special to make me spend some cash.
-
Costco has some decently priced 4k samsung suhd tvs. Probably picking up a 60 or 65 tomorrow
-
AllSouth doing anything for Black Friday?? :)
Last I heard was a "spend 5, get 5"
For every $5k spent, @Danny Kinder personally gives you a high-five
-
Costco has some decently priced 4k samsung suhd tvs. Probably picking up a 60 or 65 tomorrow
I'm grabbing one too. Didn't see Costco's deal, I'm not a member
-
I am keeping an eye on the VKS also need new sliders.
Sent from my iPhone using Tapatalk
-
VKS deal will be pretty good, keep an eye on it for sure
Sent from my iPhone using Tapatalk
-
Anything jumping out at y'all for Black Friday?
Not listing all the sales ads I've looked at so far. Nothing jumping out at me yet. May look at VKS's sale but that's the only one I'm interested in so far. Gun sales are not impressive so far.
AllSouth doing anything for Black Friday?? :)
Jp trailers has a black Friday sale.
Sent from my SM-N930V using Tapatalk
-
Anything jumping out at y'all for Black Friday?
Not listing all the sales ads I've looked at so far. Nothing jumping out at me yet. May look at VKS's sale but that's the only one I'm interested in so far. Gun sales are not impressive so far.
AllSouth doing anything for Black Friday?? :)
Jp trailers has a black Friday sale.
Sent from my SM-N930V using Tapatalk
insane deal
I called them and they said you better get to their rep in Fayetteville early AF to hope you get one
$2,999 for the 10K buggy trailer
http://www.pjtrailers.com/black-friday-2016/ (http://www.pjtrailers.com/black-friday-2016/)
-
Anything jumping out at y'all for Black Friday?
Not listing all the sales ads I've looked at so far. Nothing jumping out at me yet. May look at VKS's sale but that's the only one I'm interested in so far. Gun sales are not impressive so far.
AllSouth doing anything for Black Friday?? :)
Jp trailers has a black Friday sale.
Sent from my SM-N930V using Tapatalk
insane deal
I called them and they said you better get to their rep in Fayetteville early AF to hope you get one
$2,999 for the 10K buggy trailer
http://www.pjtrailers.com/black-friday-2016/ (http://www.pjtrailers.com/black-friday-2016/)
That is freaking incredible! I'm sure there will be a bunch of folks getting that upgrade ( @BigPrince )
-
^^wish I was ready!!
-
(https://s-media-cache-ak0.pinimg.com/736x/d4/95/9a/d4959a9ee9cfe5260b8d430bda7c33b2.jpg)
I'm in Nashville Friday. Damnit. Damnit. Damnit. I just went outside yesterday to do some cleanup on my trailer to sell it too. Fawk.
Call and see if you can pay for it over the phone and pick up later in the week
Sent from my iPhone using Tapatalk
-
^^wish I was ready!!
Tell the family they can have Christmas in July, 2017, so you can make a wise financial move that will put the family on a path to future prosperity...or something like that...and then get down there and grab that thing.
-
^^wish I was ready!!
Tell the family they can have Christmas in July, 2017, so you can make a wise financial move that will put the family on a path to future prosperity...or something like that...and then get down there and grab that thing.
Haha, will you just buy it for me and I can tell the family about our new trailer in February?
I'll bring you an IOU
-
Don't miss this opportunity
Sent from my Pixel XL using Tapatalk
-
Don't miss this opportunity
Sent from my Pixel XL using Tapatalk
Yeah Don ( @BigPrince ), don't eff this up!
-
My money is on John being there an hour before they open... Sorry DP!
Sent from my iPhone using Tapatalk
-
My money is on John being there an hour before they open... Sorry DP!
Sent from my iPhone using Tapatalk
Hope you didn't place your bet yet. I can guarantee I will not be there.
-
My money is on John being there an hour before they open... Sorry DP!
Sent from my iPhone using Tapatalk
Hope you didn't place your bet yet. I can guarantee I will not be there.
See, JC, that's how respectful John is to Don.
-
My money is on Don being there a hour before they open... Sorry JD!
Sent from my iPhone using Tapatalk
-
My money is on Don being there a hour before they open... Sorry JD!
Sent from my iPhone using Tapatalk
If there's only one, he better be there well before 1 prior to opening...I doubt he's alone in thinking that's a good deal.
-
I messaged Stout fab to see if they were going to offer up any Black Friday deals and they offered up their custom cut LJ rear corner armor in aluminum cut to whatever wheelbase I want , fuel filler location, and hinge delete for $405 to my door.
Sent from my iPhone using Tapatalk
-
My money is on Don being there a hour before they open... Sorry JD!
Sent from my iPhone using Tapatalk
Strike 2 :)
I'm out. Headed to Nashville for Thanksgiving dinner and hanging with family. Not worth the hassle. I'd rather have a BigTex anyway.
My money is on Don and John skipping this awesome deal and then bitching about wanting a drive over fender trailer for the next 6 months!
Sent from my iPhone using Tapatalk
-
I messaged Stout fab to see if they were going to offer up any Black Friday deals and they offered up their custom cut LJ rear corner armor in aluminum cut to whatever wheelbase I want , fuel filler location, and hinge delete for $405 to my door.
Sent from my iPhone using Tapatalk
It sounds like they'll be arriving any day now.
-
My money is on Don being there a hour before they open... Sorry JD!
Sent from my iPhone using Tapatalk
Strike 2 :)
I'm out. Headed to Nashville for Thanksgiving dinner and hanging with family. Not worth the hassle. I'd rather have a BigTex anyway.
My money is on Don and John skipping this awesome deal and then bitching about wanting a drive over fender trailer for the next 6 months!
Sent from my iPhone using Tapatalk
Nailed it!!!
I haven't completed my required detailed research phase before I pull the trigger on a new trailer. If we deliver the Q4 we have lined up it will be a Q1 17 purchase.
-
My money is on Don being there a hour before they open... Sorry JD!
Sent from my iPhone using Tapatalk
Strike 2 :)
I'm out. Headed to Nashville for Thanksgiving dinner and hanging with family. Not worth the hassle. I'd rather have a BigTex anyway.
My money is on Don and John skipping this awesome deal and then bitching about wanting a drive over fender trailer for the next 6 months!
Sent from my iPhone using Tapatalk
That's s great bet for Don! I can here him bitching already, so I intend to ensure this is the topic of conversation every time we're wheeling! (Kidding-ish) I doubt John will bitch for very long...he already runs without fenders, so his pain is a bit less than Don's.
I honestly can't understand the big deal for those who already have a trailer (I still have wood planks nailed to my deck so I can get the jeep over the fenders). The difference is a little wider deck, and being ultra lazy by being able to drive over some fenders. Sure, if I were in the market for a new trailer I'd consider one of those, but not if I have a great trailer already.
-
I messaged Stout fab to see if they were going to offer up any Black Friday deals and they offered up their custom cut LJ rear corner armor in aluminum cut to whatever wheelbase I want , fuel filler location, and hinge delete for $405 to my door.
Sent from my iPhone using Tapatalk
It sounds like they'll be arriving any day now.
Ya...did you order them?
-
My money is on Don being there a hour before they open... Sorry JD!
Sent from my iPhone using Tapatalk
Strike 2 :)
I'm out. Headed to Nashville for Thanksgiving dinner and hanging with family. Not worth the hassle. I'd rather have a BigTex anyway.
My money is on Don and John skipping this awesome deal and then bitching about wanting a drive over fender trailer for the next 6 months!
Sent from my iPhone using Tapatalk
Strike 3. Will have another one by CFR.
Clark - my Jeep almost fell off my trailer. Wouldn't have been an issue with the extra width. Jeep is just too wide.
I give up!
Sent from my iPhone using Tapatalk
-
Rubi 44 rear $800
He thinks is 5.13 oem
https://atlanta.craigslist.org/nat/pts/5890814886.html
Sent from my Pixel XL using Tapatalk
-
On Hardline there is a TJ Rubicon t case for $900 shipped.
-
Rubi 44 rear $800
He thinks is 5.13 oem
https://atlanta.craigslist.org/nat/pts/5890814886.html
Sent from my Pixel XL using Tapatalk
No such thing as oem 5.13. Oem everything else with 5.13 gears installed or it has 3.73 or 4.10 oem gears.
I heard from him, he did change the gears,
5.13s
Factory rubi locker.
Sent from my Pixel XL using Tapatalk
-
On Hardline there is a TJ Rubicon t case for $900 shipped.
Damn solid TC
Very fair deal for someone.
-
Factory tj rubi was 4.10 in the axles
Sent from my SM-G935V using Tapatalk
-
4 to 1
-
On Hardline there is a TJ Rubicon t case for $900 shipped.
You should be all over that @Big Dave.
-
I would but its the wrong spline count. I'd either have to tear my transmission apart & swap the 21 spline out put shaft for a 23 spline or get a '91 up transmission & have it rebuilt.
Might be better off getting a Atlas.
-
On Hardline there is a TJ Rubicon t case for $900 shipped.
You should be all over that @Big Dave.
SOLD :(
-
On Hardline there is a TJ Rubicon t case for $900 shipped.
You should be all over that @Big Dave.
SOLD :(
To you?
-
On Hardline there is a TJ Rubicon t case for $900 shipped.
You should be all over that @Big Dave.
SOLD :(
To you?
Sadly no. I started texting him early yesterday but he already a deal pending.
(http://uploads.tapatalk-cdn.com/20161128/458505d33318ccdb72e10de4e2f8e4ae.jpg)
Sent from my SM-G860P using Tapatalk
-
Damn, that's clean
-
Orange LJ on Daveys... Sweet with bullet holes
Orange 4.0, 6 Spd., A/C, CD, Cruise, Sub., 3" Rubicon Express Lift. Super Clean No rust Jeep. The Jeep will have a Salvage/Flood Title. The person who gave it a flood title made a terrible mistake. No signs of water anywhere. What happened to Jeep was either a drive by shooting or a deal gone bad. There are 2 small caliber bullet holes through left soft top window, 2 through drivers seat, and 1 in gauge cluster.
Sent from my Pixel XL using Tapatalk
-
Orange LJ on Daveys... Sweet with bullet holes
Orange 4.0, 6 Spd., A/C, CD, Cruise, Sub., 3" Rubicon Express Lift. Super Clean No rust Jeep. The Jeep will have a Salvage/Flood Title. The person who gave it a flood title made a terrible mistake. No signs of water anywhere. What happened to Jeep was either a drive by shooting or a deal gone bad. There are 2 small caliber bullet holes through left soft top window, 2 through drivers seat, and 1 in gauge cluster.
Sent from my Pixel XL using Tapatalk
13k for a salvage titled jeep with that kind of karma? No thankyou.
X2
Plus I keep seeing unmolested LJ's go for around that price.
-
Oh my!
http://m.ebay.com/itm/252661518645?_trksid=p2141725.m3641.l6368
Sent from my Pixel XL using Tapatalk
-
Oh my!
http://m.ebay.com/itm/252661518645?_trksid=p2141725.m3641.l6368
Sent from my Pixel XL using Tapatalk
Oh my!
-
^^^ pure awesomeness
Sent from my iPhone using Tapatalk
-
That will work
Sent from my iPhone using Tapatalk
-
This amazing and rare Jeep (LJ) as been totally customized and upgraded to turn it into an absolute stunner It offers premium performance on road and off-road The highest end products and workmanship were devoted to obtain a truly exceptional vehicle. Total cost well over $100, 000. Project was completed within last 2 years using only brand new parts and components. For all purposes, the whole truck is like new. Updated mileage is less than 2 100 real miles. Aluminium body, crate V8 engine mated with crate HD transmission (GML4L60) and a crate Atlas ll transfer case produce 435HP (Dyno tested)! Reinforced frame and HD Dana 60 differentials could easily support 700HP! This Jeep drives, handles and brakes unbelievably well on-road and could surely be used as a daily driver...and meet any competitive off-road challenge! This is an unbelievable Jeep that could be a magasine cover story! For true experts and serious connoisseurs.
Interested buyers are welcome to come see and inspect the vehicle at their cost in South Florida.
ENGINE:
GM V8 LS3: CRATE ENGINE (ALL ALUMINIUM) 435 H/P 430 Lbs
SHIFTER: B&M AUTO-REVERSE LOCK-UP
ALTERNATOR: MEAN GREEN
RADIATOR: FLEX-A-LITE ALUMINIUM PERFORMANCE RAD / ELECTRIC FAN
OIL PAN: MOROSSO HIGH CAPACITY ENGINE OIL PAN
ENGINE SUPPORT: CUSTOM H/D
AIR FILTER: K&N
BATTERY: YELLOW TOP OPTIMA
OTHER: PAINLESS ELECTRIC HARNESS, WATERPROOF CONNECTORS, ALL BRAIDED HOSES
DASH/CLUSTER: FULL AUTOMETER GAGES SET-UP (VOLT/OIL/WATER/ENG/SPEED/RPM
TRANSMISSION:
GM4L60
4 SPEED AUTOMATIC FITTED WITH H/D INTERNALS
TRANSFER CASE:
ATLAS II RATIO 6:1 ALL MECHANICAL GEARS (NO CHAIN)
INTEGRATED ATLAS DISC HAND-BRAKE
FRONT DIFFERENTIAL:
DANA 60 (SOLID AXEL INDUSTRIES) SUPER H/D.
DIFF. COVER (H/D) (SOLID AXEL INDUSTRIES)
DIFF. ROCK SLIDER (CUSTOM)
4.88 GEARS
RCV 300M 35 SPLINE AXELSHAFTS
SPOOL
REAR DIFFERENTIAL:
DANA 60 (SOLID AXEL INDUSTRIES) SUPER H/D. FULL FLOATING
DIFF. COVER (H/D) (SOLID AXEL INDUSTRIES)
DIFF. ROCK SLIDER (CUSTOM)
4.88 GEARS
RCV 300M 35 SPLINE AXELSHAFTS
SPOOL
BRAKES:
WILDWOOD 4 PISTON DISC BRAKES ALL AROUND
HYDRO BOOST BRAKING SYSTEM (BRAKES LIKE STOCK!)
FRONT DRIVESHAFT:
CUSTOM SUPER H/D FULLY FLANGED AT BOTH ENDS (1350CV JOINTS)
REAR DRIVESHFT:
CUSTOM SUPER H/D FULLY FLNGED AT BOTH ENDS (1350CV JOINTS)
WHEELS:
SPIDERTRACKS ALUMINIUM BEADLOCKS
8 LUGS
4 INCH PROTECTIVE RING
17 X 10
3.5 BACKSPACING
TIRES:
SUPERSWAMPER IROK RADIALS (5X) 40 X17 X 13.5
FRONT SUSPENSION:
CUSTOM 3 LINK LONG ARM H/D
RUBICON EXPRESS JOINTS
BDS COILS
HIGHEND FOX REMOTE RESERVOIR SHOCKS
ACOS ADJUSTABLE BUMPSTOPS
LIMITING STRAPS
ALL BRACKETS H/D
REAR SUSPENSION:
CUSTOM 4 LINK LONG ARM H/D
RUBICON EXPRESS JOINTS
BDS COILS
HIGHEND FOX REMOTE RESERVOIR SHOCKS
ACOS ADJUSTABLE BUMPSTOPS
LIMITING STRAPS
ALL BRACKETS H/D
DIRECTION:
CUSTOM SUPER HD ALL AROUND
RAM ASSIST
PSC STEERING BOX
PSC STERRING PUMP
BORGENSON STEEERING COLUM
HD SWAYBAR FRONT
CURRIE ADJUSTABLE ANTI-ROCK SWAYBAR REAR
LIGHTING:
LED HEAD LIGHTS (TRUCKLITE)
50 INCH LED BAR. WINDSHIELD (ROUGHCOUNTRY)
12 INCH LED BAR. FRONT BUMPER (ROUGHCOUNTRY)
3 INCH LED BARS. REAR BUMPER (ROUGHCOUNTRY)
LED BACK LIGHTS FLUSH. (STOP/BLINK/BACK-UP)
GEN-RIGHT TURN SIGNAL LIGHTS ON FRONT FENDER
3rd STOP LIGHT IN CENTER OF SPARE-TIRE (FULLY LEGAL!)
BODY/FRAME/PROTECTION/OTHER:
GEN-RIGHT HIGH FENDER ALUMINIUM FULL KIT (4 CORNERS)
LOWERED ENGINE HOOD
POISON SPYDER HOOD VENT (COLOR MATCHED)
POISON SPYDER ROLLCAGE (COLOR MATCHED) AND LINKED (6X) TO FRAME. (TRUE ROLLCAGE)
POISON SPYDER HELLDORADO ROCKSLIDERS. BOLTS ON FRAME
POISON SPYDER FRAME STIFFNERS (BACK OF FRAME LINKED TO REAR BUMPER)
FRAME HAS BEEN TOTALLY REINFORCED/BOXED WITH ADDED CROSS-MEMBERS FOR X-TRA RIGIDITY AND STRENGTH
AEV FULL TUMMYTUCKER SKID-PLATE
POISON SPYDER WINDSHIELD FRAME STIFFENER CUSTOMIZED TO ACCOMODATE 50 INCH LED BAR
HANSON REAR BUMPER WITH MODIFIED/CUSTOMIZED TIRE CARRIER (3 ATTACH POINTS) FOR 42 INCH TIRES WITH ABSOLUTE ZERO RATTLE. RECEIVER HITCH AND SHACKE ATTACH POINTS. LED LIGHTS INCORPORATED IN REAR BUMPER
FULLY CUSTOM HD FRONT BUMPER WITH PUSH BAR. 2 SHACKLE RECEIVERS . INCORPORATED 12 INCH LED LIGHT
WARN ELECTRIC 12 000 Lbs WINCH. SYNTHETIC ROPE
CORBEAU BLACK RECLINABLE RACING SEATS
RACING-HARNESS BAR MOUNTED BEHIND SEATS ONTO ROLL-CAGE. ADDED STIFFENESS. COLOR MATCHED
FIVE-POINT RACING HARNESS
FIRE EXTINGUISHERS (2X) MOUNTED ON RACING-HARNESS BAR
SIRIUS XM RADIO
FULLY LINE-XED INSIDE. EASY TO WASH
HALF-DOORS
BEST-TOP FRAMELESS TOP WITH MATCHING ZIPPER PULL-UP WINDOWS. (NO HARDWARE!)
-
I'd wheel that
-
Wonder what it would take to buy it.. $75,000?
Sent from my Pixel XL using Tapatalk
-
Wonder what it would take to buy it.. $75,000?
Sent from my Pixel XL using Tapatalk
One bid already and I don't see where it says there's a reserve. Watching it so I can see what happens and be jealous of someone.
-
Oh Tony gonna like
Sent from my Pixel XL using Tapatalk
-
Wonder what it would take to buy it.. $75,000?
Sent from my Pixel XL using Tapatalk
I sent him a PM with that exact question.
-
Rough Country light bars? Pass.
Sent from my iPhone using Tapatalk
-
Anyone want to buy a kidney?
-
Rough Country light bars? Pass.
Sent from my iPhone using Tapatalk
The cage is also sort of sketchy at the back. Notice on the rear top spreader bars how he eliminated one of the tube clamp half's and just welded the other tube clamp to the factory B pillar.
Paint on the top shock bolt and heater core hose in one of the engine shots tells me a it may have a half ass paint job.
Both are things I would think shouldn't be there on a supposed $100,000 plus rig...
-
Its not a show car or a SEMA build...
and I'd be damn proud to have it and wheel it.
I want to follow @jc79 thru Upper Heldorado in it.
-
Its not a show car or a SEMA build...
and I'd be damn proud to have it and wheel it.
I want to follow @jc79 thru Upper Heldorado in it.
Yeah I was just joking... Trying to find something, anything wrong with it... That's a killer rig that would look right at home at BFE.
Sent from my iPhone using Tapatalk
-
Its not a show car or a SEMA build...
and I'd be damn proud to have it and wheel it.
I want to follow @jc79 thru Upper Heldorado in it.
Yeah I was just joking... Trying to find something, anything wrong with it... That's a killer rig that would look right at home at BFE.
Ha I know you were.
I'm waiting on somebody to put a value of parts and labor on everything so we can x50% for a value.
I'll probably have to watch @tcdawg wheel it instead.
-
Its not a show car or a SEMA build...
and I'd be damn proud to have it and wheel it.
I want to follow @jc79 thru Upper Heldorado in it.
Yeah I was just joking... Trying to find something, anything wrong with it... That's a killer rig that would look right at home at BFE.
Ha I know you were.
I'm waiting on somebody to put a value of parts and labor on everything so we can x50% for a value.
I'll probably have to watch @tcdawg wheel it instead.
@jc79 should be able to do the math pretty quickly...it's his LJ plus a V8
-
I don't know if the math is going to translate from mine to his. I bought for $9k and have another $37k in it between parts and labor. His is a Rubi, so base price was higher. Plus V8...
Sent from my iPhone using Tapatalk
-
I never said it wasn't a jeep I wouldn't want to own or wheel the piss out of. I just think if I HAD 100K to spend building a rig I wouldn't skimp on the paint or cage...
-
Id rather have yours @jc79 & $54,000 in my pocket any day haha.
-
Who made up the price of $100k?
-
It was in your post Doug
Sent from my iPhone using Tapatalk
-
Total cost well over $100, 000.
That's his cost. Not the price. What is it really worth? half?
Not a lot of folks can drop $50,000 on an offroad rig,
but over 10 years can reach the same expenditure.
-
Total cost well over $100, 000.
That's his cost. Not the price. What is it really worth? half?
Not a lot of folks can drop $50,000 on an offroad rig,
but over 10 years can reach the same expenditure.
Used, built up stuff like that is so hard to value.
I don't see how he has $100k in it though.
I think it's worth between $27 and 30k. I would give serious consideration to it within that range.
He responded to me and said he is not giving out a solid for sale price. He wants the auction to go through.
-
Total cost well over $100, 000.
That's his cost. Not the price. What is it really worth? half?
Not a lot of folks can drop $50,000 on an offroad rig,
but over 10 years can reach the same expenditure.
Used, built up stuff like that is so hard to value.
I don't see how he has $100k in it though.
I think it's worth between $27 and 30k. I would give serious consideration to it within that range.
He responded to me and said he is not giving out a solid for sale price. He wants the auction to go through.
It was at 35k the last time I checked
-
Total cost well over $100, 000.
That's his cost. Not the price. What is it really worth? half?
Not a lot of folks can drop $50,000 on an offroad rig,
but over 10 years can reach the same expenditure.
Used, built up stuff like that is so hard to value.
I don't see how he has $100k in it though.
I think it's worth between $27 and 30k. I would give serious consideration to it within that range.
He responded to me and said he is not giving out a solid for sale price. He wants the auction to go through.
It was at 35k the last time I checked
It will be interesting to see what it ends up going for
-
$35k seems like top end in my mind. Any more and I'd want to build to my exact specs...
Sent from my iPhone using Tapatalk
-
I'd pay $40 due to engine upgrade if it had an atlas
Sent from my Pixel XL using Tapatalk
-
I'd pay $40 due to engine upgrade if it had an atlas
Sent from my Pixel XL using Tapatalk
It has a 4 speed atlas if I remember correctly
-
I'd pay $40 due to engine upgrade if it had an atlas
Sent from my Pixel XL using Tapatalk
It has a 4 speed atlas if I remember correctly
You're old, but you got that right
-
Saw this while looking at the other one.
https://www.ebay.com/itm/252656306591
-
Something like this would be fun to beat around in. I might need to sell my Mini and save some cash for a beater rig.
https://www.ebay.com/itm/252656306591
-
My point is made
Sent from my Pixel XL using Tapatalk
-
Saw this while looking at the other one.
https://www.ebay.com/itm/252656306591
That's been for sale on pirate for a while. Not bad although I would rather have a full float rear, but still not bad.
Sent from my SM-G935V using Tapatalk
-
Oh my!
http://m.ebay.com/itm/252661518645?_trksid=p2141725.m3641.l6368
Sent from my Pixel XL using Tapatalk
6 bids...$35.5. A bit over two days left
-
There is a decent 88 Cherokee on HL.
-
Damn $15,000 off a loaded Laramie mega cab.
http://www.palmerdodgegeorgia.com/new/Ram/2016-Ram-2500-Roswell-GA-963fe48f0a0e0ae7362a2320aac51ef7.htm
Sent from my Pixel XL using Tapatalk
-
They were giving those deals when I grabbed mine, couldn't pass it up
Sent from my iPad using Tapatalk
-
https://atlanta.craigslist.org/eat/ctd/5908016828.html
-
Oh my!
http://m.ebay.com/itm/252661518645?_trksid=p2141725.m3641.l6368
Sent from my Pixel XL using Tapatalk
Currently at $37k. Bidding ends at 1AM. Who's in?
-
You don't think that's Anna Paquin do you? Youtube vids of that LJ are under "Anny Paquin"
That's funny. Just looked at the videos. Wondering if it's ever seen a trail? I'd bid on it if she came with
-
Oh my!
http://m.ebay.com/itm/252661518645?_trksid=p2141725.m3641.l6368
Sent from my Pixel XL using Tapatalk
Currently at $37k. Bidding ends at 1AM. Who's in?
Sold for that...and seems about right, to me.
-
Damn $15,000 off a loaded Laramie mega cab.
http://www.palmerdodgegeorgia.com/new/Ram/2016-Ram-2500-Roswell-GA-963fe48f0a0e0ae7362a2320aac51ef7.htm (http://www.palmerdodgegeorgia.com/new/Ram/2016-Ram-2500-Roswell-GA-963fe48f0a0e0ae7362a2320aac51ef7.htm)
Sent from my Pixel XL using Tapatalk
Nice. I got ~$13k off when I bought mine so even better deal.
You definitely got a better deal than me. I think I ended up about $11k off, maybe $11.6k-ish when I include the side steps that weren't on the sticker.
-
Oh my!
http://m.ebay.com/itm/252661518645?_trksid=p2141725.m3641.l6368 (http://m.ebay.com/itm/252661518645?_trksid=p2141725.m3641.l6368)
Sent from my Pixel XL using Tapatalk
Currently at $37k. Bidding ends at 1AM. Who's in?
Sold for that...and seems about right, to me.
$37K....not outrageous at all. A lot of money for sure, but assuming it is built right, for someone looking for that type of LJ, you couldn't buy one and build it for that.
edit: I'm glad I didn't see that dyno video when the auction was still live. Damn that sounded good.
-
Not close, good buy
Sent from my Pixel XL using Tapatalk
-
:)
http://atlanta.craigslist.org/atl/cto/5881197118.html (http://atlanta.craigslist.org/atl/cto/5881197118.html)
-
:)
http://atlanta.craigslist.org/atl/cto/5881197118.html (http://atlanta.craigslist.org/atl/cto/5881197118.html)
I've seen videos of this Cherocar at the track on YouTube
-
Jeep "muscle car" //::)//
-
I like the sleeper aspect of it. He may have been at C&O when we went. I heard a Cherokee that was going through the parking lot and sounded nasty.
-
http://www.hardlinecrawlers.com/forums/index.php?topic=54176.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=54176.0)
-
http://www.hardlinecrawlers.com/forums/index.php?topic=54176.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=54176.0)
I saw that last night and meant to link it and forgot
That is a really good value for a stock LJ guy
-
Should fit TJ too right?
Edit: guess the arms might be longer? Anything else?
Edit: by install guide, looks like just shorter rear arms
My buddy Joe from St Louis is looking into it
You are on target with the rear arms being longer. Using the rear Lj arms is a great way to stretch a Tj.
-
Not posting as a good deal but noticed the rear 3rd seat with extended cage for Jay
http://atlanta.craigslist.org/nat/cto/5894162175.html
-
Not posting as a good deal but noticed the rear 3rd seat with extended cage for Jay
http://atlanta.craigslist.org/nat/cto/5894162175.html
That was the original plan, it's a thing of the past now.
Not sure I understand trying to sell your jeep without any fenders, at least throw some stockers on it.
-
Not posting as a good deal but noticed the rear 3rd seat with extended cage for Jay
http://atlanta.craigslist.org/nat/cto/5894162175.html
That was the original plan, it's a thing of the past now.
Not sure I understand trying to sell your jeep without any fenders, at least throw some stockers on it.
Yeah thought that was odd too
-
One of the nicest LJ's you will EVER find for only $18,000 Go get it NOW @clark123456
http://chicago.craigslist.org/chc/bar/5915347119.html (http://chicago.craigslist.org/chc/bar/5915347119.html)
-
One of the nicest LJ's you will EVER find for only $18,000 Go get it NOW @clark123456
http://chicago.craigslist.org/chc/bar/5915347119.html (http://chicago.craigslist.org/chc/bar/5915347119.html)
Confusing ad but I contacted him. Waiting to hear back now :)
-
One of the nicest LJ's you will EVER find for only $18,000 Go get it NOW @clark123456
http://chicago.craigslist.org/chc/bar/5915347119.html (http://chicago.craigslist.org/chc/bar/5915347119.html)
He says it is not for sale... trade only... and that stock its worth $18,000 plus tens of thousands in upgrades..
When folks don't have a price, they can't part with it for what the market will pay, so they are looking for the needle in the haystack, i.e. the guy with a lot of cash that wants it.
-
He wants Scott's son's jeep in trade.
-
One of the nicest LJ's you will EVER find for only $18,000 Go get it NOW @clark123456
http://chicago.craigslist.org/chc/bar/5915347119.html (http://chicago.craigslist.org/chc/bar/5915347119.html)
He says it is not for sale... trade only... and that stock its worth $18,000 plus tens of thousands in upgrades..
When folks don't have a price, they can't part with it for what the market will pay, so they are looking for the needle in the haystack, i.e. the guy with a lot of cash that wants it.
This. Has Mike and/or Clark been hiding an old Willis from us?
I'd prefer if they kept hiding their willy's from us
-
His reply:
If I were to sell it - it be for cash - paper money - no checks - no bank transfers - no paypal. That being said, my asking price would be $23K obo for everything listed in the ad. I can bring that number down by not including the hard top or other items. So there is some flexibility there.
Since I'm from WI (applys to the Midwest in general), we don't have a lot of people into Jeeps - and few people that could financially afford a Jeep as a "Toy". Hence my trade proposal.
-
His reply:
If I were to sell it - it be for cash - paper money - no checks - no bank transfers - no paypal. That being said, my asking price would be $23K obo for everything listed in the ad. I can bring that number down by not including the hard top or other items. So there is some flexibility there.
Since I'm from WI (applys to the Midwest in general), we don't have a lot of people into Jeeps - and few people that could financially afford a Jeep as a "Toy". Hence my trade proposal.
This dude is out of his f'n mind...
-
His reply:
If I were to sell it - it be for cash - paper money - no checks - no bank transfers - no paypal. That being said, my asking price would be $23K obo for everything listed in the ad. I can bring that number down by not including the hard top or other items. So there is some flexibility there.
Since I'm from WI (applys to the Midwest in general), we don't have a lot of people into Jeeps - and few people that could financially afford a Jeep as a "Toy". Hence my trade proposal.
I must only know rich people in WI. I'd make sure to look at the underbody... hard winters.
I understand his position because he doesn't know me from Adam. The price is a bit high but it is very clean, low miles, and has mods. He states that the Jeep isn't driven in the winter and it's already put up in storage. As you can tell, he's an overland guy so I doubt it's scared underneath.
If I was going to buy it which I'm not, I'd work the deal, send him a certified check from my credit union and go pick the Jeep up when it clears the bank.
-
I reread the ad...I agree, not bad, but not for me right now. When I first looked at it I thought it was a pretty standard LJ...my bad.
-
This is one of the cleanest ones out. I'm fairly certain the guy lives in Dubai and has several LJ's there also.
Sent from my iPhone using Tapatalk
-
I'm looking for the build thread but I can't find it right now.
Sent from my iPhone using Tapatalk
-
That LJ doesn't do anything for me.
Funny he says no one in the Midwest can afford a "toy". I think what he meant to say was no one in the Midwest is going to pay $24k because it's not worth that much.....
-
That LJ doesn't do anything for me.
Funny he says no one in the Midwest can afford a "toy". I think what he meant to say was no one in the Midwest is going to pay $24k because it's not worth that much.....
What do you think it's worth with the mods it has?
I've been keeping an eye out for a YJ to build.
-
That LJ doesn't do anything for me.
Funny he says no one in the Midwest can afford a "toy". I think what he meant to say was no one in the Midwest is going to pay $24k because it's not worth that much.....
What do you think it's worth with the mods it has?
I've been keeping an eye out for a YJ to build.
$18k plus or minus a few
Just my opinion though
-
That LJ doesn't do anything for me.
Funny he says no one in the Midwest can afford a "toy". I think what he meant to say was no one in the Midwest is going to pay $24k because it's not worth that much.....
What do you think it's worth with the mods it has?
I've been keeping an eye out for a YJ to build.
$18k plus or minus a few
Just my opinion though
I looked at it but don't remember all that was done. That sounds about right to me, too. Seemed to me to be a good balance of things being done, but still leaving room for the buyer to do the "big things" exactly how they wanted them done.
I always cringed when I found a semi-built rig but it had tube fenders that weren't high-line or sliders and rear corners that weren't stretched. I just knew I would have been paying for work that I would really want to completely re-do.
-
Stumbled upon this while searching for a 98-01 aw4 TCU.
I liked the fact the seller has a "build sheet."
https://atlanta.craigslist.org/atl/cto/5893154304.html
-
Masochistic of him.
LMAO, but true.
-
Masochistic of him.
LMAO, but true.
Just read my build thread and it wreaks of masochism. I don't think he, nor I, are alone in that respect!
-
Masochistic of him.
LMAO, but true.
Just read my build thread and it wreaks of masochism. I don't think he, nor I, are alone in that respect!
I will probably do something close to it one day but I really never want to line item my costs.
I do it with every build that I do. Jeep, Harley, etc. I like to know what I have in it but it also helps with insurance claims.
-
Masochistic of him.
LMAO, but true.
Just read my build thread and it wreaks of masochism. I don't think he, nor I, are alone in that respect!
I will probably do something close to it one day but I really never want to line item my costs.
I have a 3 ring binder w my build in it. It is line itemed but there is no total...that's just not necessary to see.
And x 2 on insurance. I have an added dollar amount w AJ and my book of aftermarket stuff will serve as back up if I ever need to make a claim.
-
^ I have never kept one invoice. I don't think Danny even hands it to me anymore.
-
This seems tempting...
http://denver.craigslist.org/pts/5917747614.html (http://denver.craigslist.org/pts/5917747614.html)
-
This seems tempting...
http://denver.craigslist.org/pts/5917747614.html (http://denver.craigslist.org/pts/5917747614.html)
$4750 beefier than your Rubi axles? Still a 44 front. Still semi float rear (granted its a 60).
-
That's a great deal!
Sent from my iPhone using Tapatalk
-
https://r.tapatalk.com/shareLink?url=http%3A%2F%2Fwww%2Ehardlinecrawlers%2Ecom%2Fforums%2Findex%2Ephp%3Ftopic%3D54192%2E0&share_tid=54192&share_fid=32116&share_type=t
98 TJ One Ton 40" A/C& Cruise NO Trades
-
https://r.tapatalk.com/shareLink?url=http%3A%2F%2Fwww%2Ehardlinecrawlers%2Ecom%2Fforums%2Findex%2Ephp%3Ftopic%3D54192%2E0&share_tid=54192&share_fid=32116&share_type=t
98 TJ One Ton 40" A/C& Cruise NO Trades
I need to start over,lol lol
Sent from my iPad using Tapatalk
-
^ I have never kept one invoice. I don't think Danny even hands it to me anymore.
Evidence is a bitch for the married man savings plan.
-
98 TJ One Ton 40" A/C& Cruise NO Trades
http://www.hardlinecrawlers.com/forums/index.php?topic=54192.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=54192.0)
@Doug trail beater
I see a stretch and a little suspension modification and that could be a really strong rig,
but its really purdy! (No V8)
-
That's a good looking TJ...
-
98 TJ One Ton 40" A/C& Cruise NO Trades
http://www.hardlinecrawlers.com/forums/index.php?topic=54192.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=54192.0)
@Doug trail beater
I see a stretch and a little suspension modification and that could be a really strong rig,
but its really purdy! (No V8)
Why do you need a V8? I'd probably rather have a stroker I6 in that rig.
-
Why do you need a V8? I'd probably rather have a stroker I6 in that rig.
I often think the same thing with my TJ and then I hear Danny, Steve's YJ, Scott or Biscuit get on it on an obstacle and realize that nothing beats a V8... ;-)
-
98 TJ One Ton 40" A/C& Cruise NO Trades
http://www.hardlinecrawlers.com/forums/index.php?topic=54192.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=54192.0)
@Doug trail beater
I see a stretch and a little suspension modification and that could be a really strong rig,
but its really purdy! (No V8)
Why do you need a V8? I'd probably rather have a stroker I6 in that rig.
BadAsser
Sent from my Pixel XL using Tapatalk
-
98 TJ One Ton 40" A/C& Cruise NO Trades
http://www.hardlinecrawlers.com/forums/index.php?topic=54192.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=54192.0)
@Doug trail beater
I see a stretch and a little suspension modification and that could be a really strong rig,
but its really purdy! (No V8)
Why do you need a V8? I'd probably rather have a stroker I6 in that rig.
BadAsser
Sent from my Pixel XL using Tapatalk
There is that! Lot of money to spend for more noise. I'm a V8 guy through and through but practicality has to enter at some point.
If I could sell my '14JKR I'd pay but that white TJ and buy a tow rig as my DD. F250 4x4 Diesel.
-
98 TJ One Ton 40" A/C& Cruise NO Trades
http://www.hardlinecrawlers.com/forums/index.php?topic=54192.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=54192.0)
@Doug trail beater
I see a stretch and a little suspension modification and that could be a really strong rig,
but its really purdy! (No V8)
Why do you need a V8? I'd probably rather have a stroker I6 in that rig.
BadAsser
Sent from my Pixel XL using Tapatalk
There is that! Lot of money to spend for more noise. I'm a V8 guy through and through but practicality has to enter at some point.
If I could sell my '14JKR I'd pay but that white TJ and buy a tow rig as my DD. F250 4x4 Diesel.
We're not stopping you... :)
-
If I could sell my '14JKR for what I think its worth, and not what the market thinks its worth, I'd pay but that white TJ and buy a tow rig as my DD. F250 4x4 Diesel.
FIFY
-
98 TJ One Ton 40" A/C& Cruise NO Trades
http://www.hardlinecrawlers.com/forums/index.php?topic=54192.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=54192.0)
@Doug trail beater
I see a stretch and a little suspension modification and that could be a really strong rig,
but its really purdy! (No V8)
Maybe a cage?
-
98 TJ One Ton 40" A/C& Cruise NO Trades
http://www.hardlinecrawlers.com/forums/index.php?topic=54192.0 (http://www.hardlinecrawlers.com/forums/index.php?topic=54192.0)
@Doug trail beater
I see a stretch and a little suspension modification and that could be a really strong rig,
but its really purdy! (No V8)
Why do you need a V8? I'd probably rather have a stroker I6 in that rig.
I have wheel with both and the v8 is a lot more than just noise. What would be wrapped up on a stroker build would be more than a v8 and will never match the ability of a v8.
-
If I could sell my '14JKR for what I think its worth, and not what the market thinks its worth, I'd pay but that white TJ and buy a tow rig as my DD. F250 4x4 Diesel.
FIFY
What's the going rate on ROI for mods? 50% 40% 30% 0%?
The problem with selling a molded Jeep is that too many don't have cash for the newer Jeeps.
Sent from my iPhone using Tapatalk
-
If I could sell my '14JKR for what I think its worth, and not what the market thinks its worth, I'd pay but that white TJ and buy a tow rig as my DD. F250 4x4 Diesel.
FIFY
What's the going rate on ROI for mods? 50% 40% 30% 0%?
The problem with selling a molded Jeep is that too many don't have cash for the newer Jeeps.
Sent from my iPhone using Tapatalk
I figure 50-60% of the cost of the parts... not much if anything for the labor. Yours is new enough that someone could get a bank loan on it, right?
-
If I could sell my '14JKR for what I think its worth, and not what the market thinks its worth, I'd pay but that white TJ and buy a tow rig as my DD. F250 4x4 Diesel.
FIFY
What's the going rate on ROI for mods? 50% 40% 30% 0%?
The problem with selling a molded Jeep is that too many don't have cash for the newer Jeeps.
Sent from my iPhone using Tapatalk
I figure 50-60% of the cost of the parts... not much if anything for the labor. Yours is new enough that someone could get a bank loan on it, right?
Yep, it's a 14. I had it for sale earlier in the year for $38k obo. That was KBB plus $5k (it has $11k in upgrades without labor). Couldn't get a nibble. Bank won't loan more than NADA Retail. So people would have to come out of pocket for the rest.
I'm keeping it now. Going to add another $4k and do Artec Trusses front and rear, Poly Ball Joints, River Raider Gas Tank Skid (to complete the RR skid system), and Metal Cloak Full Overline Fender, Side & Corner Armor System (http://www.metalcloak.com/product-p/3502.htm). Then in 2018 I'm planning to do UD60's & 37's.
-
If I could sell my '14JKR for what I think its worth, and not what the market thinks its worth, I'd pay but that white TJ and buy a tow rig as my DD. F250 4x4 Diesel.
FIFY
What's the going rate on ROI for mods? 50% 40% 30% 0%?
The problem with selling a molded Jeep is that too many don't have cash for the newer Jeeps.
Sent from my iPhone using Tapatalk
I figure 50-60% of the cost of the parts... not much if anything for the labor. Yours is new enough that someone could get a bank loan on it, right?
Yep, it's a 14. I had it for sale earlier in the year for $38k obo. That was KBB plus $5k (it has $11k in upgrades without labor). Couldn't get a nibble. Bank won't loan more than NADA Retail. So people would have to come out of pocket for the rest.
I'm keeping it now. Going to add another $4k and do Artec Trusses front and rear, Poly Ball Joints, River Raider Gas Tank Skid (to complete the RR skid system), and Metal Cloak Full Overline Fender, Side & Corner Armor System (http://www.metalcloak.com/product-p/3502.htm). Then in 2018 I'm planning to do UD60's & 37's.
UD60s and 37 won't mix well. My 38s still drag over everything...not as bad as 8.8 with 35s, but it's noticeable.
-
IMO, for 37's I would go Dynatrac PR60's. Best ground clearance in the industry...
-
IMO, for 37's I would go Dynatrac PR60's. Best ground clearance in the industry...
Let's fix that.
I would go fab housing for the best clearance, strength, and weight difference.
Sent from my SM-G935V using Tapatalk
-
If I could sell my '14JKR for what I think its worth, and not what the market thinks its worth, I'd pay but that white TJ and buy a tow rig as my DD. F250 4x4 Diesel.
FIFY
What's the going rate on ROI for mods? 50% 40% 30% 0%?
The problem with selling a molded Jeep is that too many don't have cash for the newer Jeeps.
Sent from my iPhone using Tapatalk
I figure 50-60% of the cost of the parts... not much if anything for the labor. Yours is new enough that someone could get a bank loan on it, right?
Yep, it's a 14. I had it for sale earlier in the year for $38k obo. That was KBB plus $5k (it has $11k in upgrades without labor). Couldn't get a nibble. Bank won't loan more than NADA Retail. So people would have to come out of pocket for the rest.
I'm keeping it now. Going to add another $4k and do Artec Trusses front and rear, Poly Ball Joints, River Raider Gas Tank Skid (to complete the RR skid system), and Metal Cloak Full Overline Fender, Side & Corner Armor System (http://www.metalcloak.com/product-p/3502.htm). Then in 2018 I'm planning to do UD60's & 37's.
The deeper you get into them the harder they are to sale. Body damage does and will occur. Solid idea, but know it's a sunk cost. Nothing for labor and 50% on a good day for parts.
Ever post it on pirate and Facebook groups? I'm sure you would get something then.
Sent from my SM-G935V using Tapatalk
-
IMO, for 37's I would go Dynatrac PR60's. Best ground clearance in the industry...
Long time argument between companies. Dynas are fine axles if not the best hands down. I am with Currie that they have the highest clearance, measured to the lowest point. Somebody ought to have done the comparison somewhere.
Dynatrac says
Most ground clearance of any housing that uses an 8.5” diameter or larger ring gear
Currie says
The RockJock® III high pinion frontend assembly for the 2007 and up Jeep JK includes the complete housing featuring the 65-45-12 ductile iron housing center (highest ground clearance 60 on the market), AR400 heat treated bottom skid plate allowing the axle to slide over rocks easily, 3" d.o.m. x .3125" wall steel tubes, 1 ton inner knuckles, 5/16" thick heavy steel diff cover, yoke (1310/1330/1350 optional), and all new heavy duty Currie Jeep JK suspension brackets mounted. Upper control arm brackets are equipped with Johnny Joint® rod ends for maximum articulation. Axles shafts are the Currie performance 4340 35 spline inner and outer with Spicer 1480 u-joints. Outer assemblies include 1 ton outer knuckles featuring Currie "high steer" steering arm and ball joints installed, Currie exclusive 1 ton unit bearings with 5 on 5 1/2" wheel bolt pattern, 1/2" thread wheel studs and JK tone rings installed allowing for ABS and ESP retention, 13" vented rotors (over 1" greater diameter than stock for increased braking), zinc plated caliper brackets that allow the use of the stock JK front calipers, Currie drive flanges or premium manual locking hubs, and our heavy duty 1 3/8" o.d. 4130 chrome moly tie rod with tie rod ends.
http://www.currieenterprises.com/JK-RJIIIF
Sent from my Pixel XL using Tapatalk
-
IMO, for 37's I would go Dynatrac PR60's. Best ground clearance in the industry...
Let's fix that.
I would go fab housing for the best clearance, strength, and weight difference.
Sent from my SM-G935V using Tapatalk
Was it broke?
Sent from my Pixel XL using Tapatalk
-
Long time argument between companies.
Found it straight from Dynatrac and it explains why the RockJock wins when measuring. Dynatrac looks at all of the area before the centerline.
1.Ground Clearance – The ProRock has absolutely the most ground clearance of any Dana 60 housing. We have a US Pat.Pend. on its design. In terms of reducing the area that is below axle centerline, the ProRock60 has the most ground clearance.
Sent from my Pixel XL using Tapatalk
-
IMO, for 37's I would go Dynatrac PR60's. Best ground clearance in the industry...
Let's fix that.
I would go fab housing for the best clearance, strength, and weight difference.
and add weeks/months of aggravation and labor costs to build something that doesn't exist for a JK's ABS.
The only downside to Dynatrac is cost and that is eased by buying used.
I'm going to disagree. You can literally run any inner and outer c combination on the housing. Any mounting put can be glued on. The tone ring can be added. So I fail to see your logic. You can glue on the factory knuckles if you so desire. Run currie knuckles that are set up for it. On and on.
I'm betting it's almost easier because you can have literally any accessory and put the axle where they need to be. I'm referring to Doug situation. You can have them wide or narrow. They can fit between trailers per the cut of the axle.
IMO, for 37's I would go Dynatrac PR60's. Best ground clearance in the industry...
Let's fix that.
I would go fab housing for the best clearance, strength, and weight difference.
Sent from my SM-G935V using Tapatalk
Was it broke?
Sent from my Pixel XL using Tapatalk
Just a matter of opinion like most anything on here.
Sent from my SM-G935V using Tapatalk
-
]
I'm going to disagree. You can literally run any inner and outer c combination on the housing. Any mounting put can be glued on. The tone ring can be added. So I fail to see your logic. You can glue on the factory knuckles if you so desire. Run currie knuckles that are set up for it. On and on.
I'm betting it's almost easier because you can have literally any accessory and put the axle where they need to be. I'm referring to Doug situation. You can have them wide or narrow. They can fit between trailers per the cut of the axle.
Your talking custom axles. Great if you have a shop and provide the labor, but the price of having them built professionally that way is exorbitant.
We're talking assembly line cookie cutter axles that are affordable, well relatively speaking.
Sent from my Pixel XL using Tapatalk
-
If I could sell my '14JKR for what I think its worth, and not what the market thinks its worth, I'd pay but that white TJ and buy a tow rig as my DD. F250 4x4 Diesel.
FIFY
What's the going rate on ROI for mods? 50% 40% 30% 0%?
The problem with selling a molded Jeep is that too many don't have cash for the newer Jeeps.
Sent from my iPhone using Tapatalk
I figure 50-60% of the cost of the parts... not much if anything for the labor. Yours is new enough that someone could get a bank loan on it, right?
Yep, it's a 14. I had it for sale earlier in the year for $38k obo. That was KBB plus $5k (it has $11k in upgrades without labor). Couldn't get a nibble. Bank won't loan more than NADA Retail. So people would have to come out of pocket for the rest.
I'm keeping it now. Going to add another $4k and do Artec Trusses front and rear, Poly Ball Joints, River Raider Gas Tank Skid (to complete the RR skid system), and Metal Cloak Full Overline Fender, Side & Corner Armor System (http://www.metalcloak.com/product-p/3502.htm). Then in 2018 I'm planning to do UD60's & 37's.
UD60s and 37 won't mix well. My 38s still drag over everything...not as bad as 8.8 with 35s, but it's noticeable.
I would be willing to bet it's the driver more than anything
Sent from my iPhone using Tapatalk
-
]
I'm going to disagree. You can literally run any inner and outer c combination on the housing. Any mounting put can be glued on. The tone ring can be added. So I fail to see your logic. You can glue on the factory knuckles if you so desire. Run currie knuckles that are set up for it. On and on.
I'm betting it's almost easier because you can have literally any accessory and put the axle where they need to be. I'm referring to Doug situation. You can have them wide or narrow. They can fit between trailers per the cut of the axle.
Your talking custom axles. Great if you have a shop and provide the labor, but the price of having them built professionally that way is exorbitant.
We're talking assembly line cookie cutter axles that are affordable, well relatively speaking.
Sent from my Pixel XL using Tapatalk
What's the Dynatrac retail price and what does it come with to bolt it in?
Sent from my SM-G935V using Tapatalk
-
If I could sell my '14JKR for what I think its worth, and not what the market thinks its worth, I'd pay but that white TJ and buy a tow rig as my DD. F250 4x4 Diesel.
FIFY
What's the going rate on ROI for mods? 50% 40% 30% 0%?
The problem with selling a molded Jeep is that too many don't have cash for the newer Jeeps.
Sent from my iPhone using Tapatalk
I figure 50-60% of the cost of the parts... not much if anything for the labor. Yours is new enough that someone could get a bank loan on it, right?
Yep, it's a 14. I had it for sale earlier in the year for $38k obo. That was KBB plus $5k (it has $11k in upgrades without labor). Couldn't get a nibble. Bank won't loan more than NADA Retail. So people would have to come out of pocket for the rest.
I'm keeping it now. Going to add another $4k and do Artec Trusses front and rear, Poly Ball Joints, River Raider Gas Tank Skid (to complete the RR skid system), and Metal Cloak Full Overline Fender, Side & Corner Armor System (http://www.metalcloak.com/product-p/3502.htm). Then in 2018 I'm planning to do UD60's & 37's.
UD60s and 37 won't mix well. My 38s still drag over everything...not as bad as 8.8 with 35s, but it's noticeable.
I would be willing to bet it's the driver more than anything
Sent from my iPhone using Tapatalk
Likely! Hopefully we'll know soon...get yours done, boy!
-
]
I'm going to disagree. You can literally run any inner and outer c combination on the housing. Any mounting put can be glued on. The tone ring can be added. So I fail to see your logic. You can glue on the factory knuckles if you so desire. Run currie knuckles that are set up for it. On and on.
I'm betting it's almost easier because you can have literally any accessory and put the axle where they need to be. I'm referring to Doug situation. You can have them wide or narrow. They can fit between trailers per the cut of the axle.
Your talking custom axles. Great if you have a shop and provide the labor, but the price of having them built professionally that way is exorbitant.
We're talking assembly line cookie cutter axles that are affordable, well relatively speaking.
Sent from my Pixel XL using Tapatalk
Ruffstuff housing, solid c welded, armor welded, truss welded, hubs, with lock outs: $3658
Solid Knuckles: $440
D60 jk tone ring: $45
RCV 4340: $2295
mega hi9 with arb: $3559
Brakes: $500
Fab and material for links mounts $1000 roughly
$11,500 - no discount price. Average 15% discount would put it $9975
kinda close dynatrac - $7800 but no rcv and not sure about arb included. not sure if thats the higher end 60 or if there is just one.
In the end the fab housing will be a little more, but there is a lot more strength.
-
I would be willing to bet it's the driver more than anything
Sent from my iPhone using Tapatalk
Likely! Hopefully we'll know soon...get yours done, boy!
[/quote]
I will have a whole other mess of problems w my wheel base.
Sent from my iPhone using Tapatalk
-
I would be willing to bet it's the driver more than anything
Sent from my iPhone using Tapatalk
Likely! Hopefully we'll know soon...get yours done, boy!
I will have a whole other mess of problems w my wheel base.
Sent from my iPhone using Tapatalk
[/quote]I am just ready for you to show me how the chunk doesn't get hung up for you :) Your wheelbase will help in some places, and hurt in others...it really just depends on the obstacle...and the driver, of course :)
-
Haha doubtful that I'm going to show you much of anything.
Sent from my iPhone using Tapatalk
-
]
I'm going to disagree. You can literally run any inner and outer c combination on the housing. Any mounting put can be glued on. The tone ring can be added. So I fail to see your logic. You can glue on the factory knuckles if you so desire. Run currie knuckles that are set up for it. On and on.
I'm betting it's almost easier because you can have literally any accessory and put the axle where they need to be. I'm referring to Doug situation. You can have them wide or narrow. They can fit between trailers per the cut of the axle.
Your talking custom axles. Great if you have a shop and provide the labor, but the price of having them built professionally that way is exorbitant.
We're talking assembly line cookie cutter axles that are affordable, well relatively speaking.
Sent from my Pixel XL using Tapatalk
Ruffstuff housing, solid c welded, armor welded, truss welded, hubs, with lock outs: $3658
Solid Knuckles: $440
D60 jk tone ring: $45
RCV 4340: $2295
mega hi9 with arb: $3559
Brakes: $500
Fab and material for links mounts $1000 roughly
$11,500 - no discount price. Average 15% discount would put it $9975
kinda close dynatrac - $7800 but no rcv and not sure about arb included. not sure if thats the higher end 60 or if there is just one.
In the end the fab housing will be a little more, but there is a lot more strength.
so this is one axle?
-
]
I'm going to disagree. You can literally run any inner and outer c combination on the housing. Any mounting put can be glued on. The tone ring can be added. So I fail to see your logic. You can glue on the factory knuckles if you so desire. Run currie knuckles that are set up for it. On and on.
I'm betting it's almost easier because you can have literally any accessory and put the axle where they need to be. I'm referring to Doug situation. You can have them wide or narrow. They can fit between trailers per the cut of the axle.
Your talking custom axles. Great if you have a shop and provide the labor, but the price of having them built professionally that way is exorbitant.
We're talking assembly line cookie cutter axles that are affordable, well relatively speaking.
Sent from my Pixel XL using Tapatalk
Ruffstuff housing, solid c welded, armor welded, truss welded, hubs, with lock outs: $3658
Solid Knuckles: $440
D60 jk tone ring: $45
RCV 4340: $2295
mega hi9 with arb: $3559
Brakes: $500
Fab and material for links mounts $1000 roughly
$11,500 - no discount price. Average 15% discount would put it $9975
kinda close dynatrac - $7800 but no rcv and not sure about arb included. not sure if thats the higher end 60 or if there is just one.
In the end the fab housing will be a little more, but there is a lot more strength.
so this is one axle?
Yes, the front. Rough estimate for both.
But they are the the same in options though so the Dynatrac needs to be higher in price.
Sent from my SM-G935V using Tapatalk
-
In the end the fab housing will be a little more, but there is a lot more strength.
And clearance?
-
In the end the fab housing will be a little more, but there is a lot more strength.
And clearance?
http://www.ruffstuffspecialties.com/catalog/merchant.mvc?Screen=PROD&Store_Code=ruffstuff&Product_Code=FORD9&Category_Code=FORD9HOS
Sent from my SM-G935V using Tapatalk
-
]
I'm going to disagree. You can literally run any inner and outer c combination on the housing. Any mounting put can be glued on. The tone ring can be added. So I fail to see your logic. You can glue on the factory knuckles if you so desire. Run currie knuckles that are set up for it. On and on.
I'm betting it's almost easier because you can have literally any accessory and put the axle where they need to be. I'm referring to Doug situation. You can have them wide or narrow. They can fit between trailers per the cut of the axle.
Your talking custom axles. Great if you have a shop and provide the labor, but the price of having them built professionally that way is exorbitant.
We're talking assembly line cookie cutter axles that are affordable, well relatively speaking.
Sent from my Pixel XL using Tapatalk
Ruffstuff housing, solid c welded, armor welded, truss welded, hubs, with lock outs: $3658
Solid Knuckles: $440
D60 jk tone ring: $45
RCV 4340: $2295
mega hi9 with arb: $3559
Brakes: $500
Fab and material for links mounts $1000 roughly
$11,500 - no discount price. Average 15% discount would put it $9975
kinda close dynatrac - $7800 but no rcv and not sure about arb included. not sure if thats the higher end 60 or if there is just one.
In the end the fab housing will be a little more, but there is a lot more strength.
so this is one axle?
Yes, the front. Rough estimate for both.
But they are the the same in options though so the Dynatrac needs to be higher in price.
Sent from my SM-G935V using Tapatalk
I can get two D60's, front and rear, for that same price.
I know you keep saying these ruff stuff housings are stronger, lighter and have more clearance...and I believe you. But for that price I'll stick with a Dana 60. Dana has been making axles for a long, long time and they are plenty strong.
-
]
I'm going to disagree. You can literally run any inner and outer c combination on the housing. Any mounting put can be glued on. The tone ring can be added. So I fail to see your logic. You can glue on the factory knuckles if you so desire. Run currie knuckles that are set up for it. On and on.
I'm betting it's almost easier because you can have literally any accessory and put the axle where they need to be. I'm referring to Doug situation. You can have them wide or narrow. They can fit between trailers per the cut of the axle.
Your talking custom axles. Great if you have a shop and provide the labor, but the price of having them built professionally that way is exorbitant.
We're talking assembly line cookie cutter axles that are affordable, well relatively speaking.
Sent from my Pixel XL using Tapatalk
Ruffstuff housing, solid c welded, armor welded, truss welded, hubs, with lock outs: $3658
Solid Knuckles: $440
D60 jk tone ring: $45
RCV 4340: $2295
mega hi9 with arb: $3559
Brakes: $500
Fab and material for links mounts $1000 roughly
$11,500 - no discount price. Average 15% discount would put it $9975
kinda close dynatrac - $7800 but no rcv and not sure about arb included. not sure if thats the higher end 60 or if there is just one.
In the end the fab housing will be a little more, but there is a lot more strength.
so this is one axle?
Yes, the front. Rough estimate for both.
But they are the the same in options though so the Dynatrac needs to be higher in price.
Sent from my SM-G935V using Tapatalk
I can get two D60's, front and rear, for that same price.
I know you keep saying these ruff stuff housings are stronger, lighter and have more clearance...and I believe you. But for that price I'll stick with a Dana 60. Dana has been making axles for a long, long time and they are plenty strong.
Junk yard 60, you talking?
Didn't say it was cheap...lol. Knowing how to drive it will get anyone a long way. I would choose a better option than a 60 rear, personally. You save as long as don't touch the knuckles. The mega hi 9 is a lot more so a low 9 could be ran. None the less, I'd run JY stuff as well.
Sent from my SM-G935V using Tapatalk
-
Junk yard 60, you talking?
No. Not talking JY axles or Dynatrac
Dana UD 60 axles...from Dana
-
Junk yard 60, you talking?
No. Not talking JY axles or Dynatrac
Dana UD 60 axles...from Dana
I just saw the front is $7600 but that doesn't have rcv or arb. Add those two in at about $1500 more and your at that price. Or am I missing something.
Sent from my SM-G935V using Tapatalk
-
Junk yard 60, you talking?
No. Not talking JY axles or Dynatrac
Dana UD 60 axles...from Dana
Is the UD60 ball joint or kingpin ? Any high steer options?
Just put a Steering 14bolt together for about the same price as that UD60. Spidertrax pro Knuckles unit bearings, spool, and 300m Spidertrax shafts all 40 spline.
-
i see what you are saying but alot of us don't need the strength of what you are proposing putting together. Doubtful i will ever break a ujoint with my new axles and v6.
-
Is the UD60 ball joint or kingpin ? Any high steer options?
Just put a Steering 14bolt together for about the same price as that UD60. Spidertrax pro Knuckles unit bearings, spool, and 300m Spidertrax shafts all 40 spline.
Balljoint
-
Is the UD60 ball joint or kingpin ? Any high steer options?
Just put a Steering 14bolt together for about the same price as that UD60. Spidertrax pro Knuckles unit bearings, spool, and 300m Spidertrax shafts all 40 spline.
Balljoint
How well do they hold up? Are they the newer bigger joints like the 06 and up stuff?
I get about three rides on the jeep and the balljoints are loose.
-
Is the UD60 ball joint or kingpin ? Any high steer options?
Just put a Steering 14bolt together for about the same price as that UD60. Spidertrax pro Knuckles unit bearings, spool, and 300m Spidertrax shafts all 40 spline.
Balljoint
How well do they hold up? Are they the newer bigger joints like the 06 and up stuff?
I get about three rides on the jeep and the balljoints are loose.
Have you done the mod where you put the lower joint into the top assuming the upper is loose.
Sent from my SM-G935V using Tapatalk
-
Is the UD60 ball joint or kingpin ? Any high steer options?
Just put a Steering 14bolt together for about the same price as that UD60. Spidertrax pro Knuckles unit bearings, spool, and 300m Spidertrax shafts all 40 spline.
Balljoint
How well do they hold up? Are they the newer bigger joints like the 06 and up stuff?
I get about three rides on the jeep and the balljoints are loose.
Have you done the mod where you put the lower joint into the top assuming the upper is loose.
Sent from my SM-G935V using Tapatalk
Nope. Both get loose so not spending anymore money or time on it.Time for a update anyway. Last trip out broke a rear shaft that took out the spindle on the sterling so might as well upgrade that as well.
-
http://rubicon.pridemore.org/ Found this trolling around
Sent from my iPad using Tapatalk
-
Its on CL. If he cleaned it up he could probably get $20k.
-
//popcorn//
-
//popcorn//
This is the Good Deal thread //cheers2//
-
//popcorn//
This is the Good Deal thread //cheers2//
48k and looks like it is still on coils and shocks....
Sent from my Pixel XL using Tapatalk
-
//popcorn//
That looks like the one on eBay last month. Dudes flipping it. Not going to get $48k that's for sure.
Still a sweet rig
-
//popcorn//
That looks like the one on eBay last month. Dudes flipping it. Not going to get $48k that's for sure.
Still a sweet rig
I agree
Sent from my Pixel XL using Tapatalk
-
I thought that looked familiar
-
Don't see him making a cent
Sent from my Pixel XL using Tapatalk
-
Don't see him making a cent
Sent from my Pixel XL using Tapatalk
Nope, I think the 37k was about right.
-
@tcdawg
Omg it needs my axles, at least the rear.
http://www.daveysjeeps.com/repairables/R755096.html
Sent from my Pixel XL using Tapatalk
-
@tcdawg
Omg it needs my axles, at least the rear.
http://www.daveysjeeps.com/repairables/R755096.html (http://www.daveysjeeps.com/repairables/R755096.html)
Sent from my Pixel XL using Tapatalk
We would be twins haha
I didn't give much more than that for mine with a clean title. //peek// that one does have about 50K less miles though. I wonder why it has a salvage title? Theft possibly?
-
06 LJ Rubi, 172k miles. $6100 at Davey's.
http://www.daveysjeeps.com/repairables/R755079.html
Sent from my SM-G935V using Tapatalk
-
@Krawler00 check this out. Super kewl
http://atlanta.craigslist.org/atl/cto/5912034944.html (http://atlanta.craigslist.org/atl/cto/5912034944.html)
(https://images.craigslist.org/00h0h_9st14bAeIEq_600x450.jpg)
(https://images.craigslist.org/00a0a_ip9lRuIKlNU_600x450.jpg)
(https://images.craigslist.org/01717_aqPGoVTVelX_600x450.jpg)
-
SHIZZLE!!!! All it needs is a good drop and head for the cruise in! I love it!!
Sent from my SM-G920P using Tapatalk
-
Got a D60 for sale http://atlanta.craigslist.org/nat/pts/5956827820.html (http://atlanta.craigslist.org/nat/pts/5956827820.html)
-
Got a D60 for sale http://atlanta.craigslist.org/nat/pts/5956827820.html (http://atlanta.craigslist.org/nat/pts/5956827820.html)
Sure wish this was sitting in my shop waiting to be slung under my LJ....
-
Got a D60 for sale http://atlanta.craigslist.org/nat/pts/5956827820.html (http://atlanta.craigslist.org/nat/pts/5956827820.html)
Sure wish this was sitting in my shop waiting to be slung under my LJ....
You can make that happen. Stop making excuses; start getting stuff done
-
BFH JK Rear
Clearance
http://shop.poisonspyder.com/mobile/Product.aspx?ProductCode=17-17-020
-
https://atlanta.craigslist.org/atl/cto/5907952422.html
-
https://atlanta.craigslist.org/atl/cto/5907952422.html
better hope he didnt tow that boat too much or that tranny is as good as gone.
-
https://atlanta.craigslist.org/atl/cto/5907952422.html
better hope he didnt tow that boat too much or that tranny is as good as gone.
What is the tow rating on the LJ compared to a TJ? Only difference between the too is wheelbase so can't be that much more.
-
3,500 lbs for an LJ and 1,500 lbs for a TJ. I disagree but that's what Jeep says.
Sent from my iPhone using Tapatalk
-
Holy crap that is a big difference! I have towed my pop up with my jeep and it was super sketchy. Also does not help that I have no rear sway bar //:o// But power was not an issue. I would not have thought they were rated for that.
-
3,500 lbs for an LJ and 1,500 lbs for a TJ. I disagree but that's what Jeep says.
Sent from my iPhone using Tapatalk
I was wrong. The TJ is 2,000 lbs.
-
I know that is what they say to pull "max" weight but one time me and some buddies went camping and I was in my jeep and my buddy was driving his 86 suburban loaded with camping supplies and a crap ton of firewood. Well he broke down going over the pass at unicoi gap near helen. I hooked him up to my jeep (also loaded with gear and another person) and I towed him from the turn to brasstown bald to the pull off at the appalachian trail crossing on the crest of unicoi gap which is all uphill and very steep. I figure the weight I pulled was close to 5500lbs and the jeep never complained. If that is not a testament to the 4.0 I don't know what is. I also need to add that it was also when I had my D35 rear (super 35 kit installed) so yeah, crazy.
-
I know that is what they say to pull "max" weight but one time me and some buddies went camping and I was in my jeep and my buddy was driving his 86 suburban loaded with camping supplies and a crap ton of firewood. Well he broke down going over the pass at unicoi gap near helen. I hooked him up to my jeep (also loaded with gear and another person) and I towed him from the turn to brasstown bald to the pull off at the appalachian trail crossing on the crest of unicoi gap which is all uphill and very steep. I figure the weight I pulled was close to 5500lbs and the jeep never complained. If that is not a testament to the 4.0 I don't know what is. I also need to add that it was also when I had my D35 rear (super 35 kit installed) so yeah, crazy.
I pulled a broken down 18 wheeler up a hill twice that steep with my JKU. :)
-
Ha ha ha ha. Uh huh. 1:18 scale?
Sent from my SM-G920P using Tapatalk
-
Ha ha ha ha. Uh huh. 1:18 scale?
Sent from my SM-G920P using Tapatalk
owned!
-
https://atlanta.craigslist.org/atl/cto/5907952422.html
better hope he didnt tow that boat too much or that tranny is as good as gone.
What is the tow rating on the LJ compared to a TJ? Only difference between the too is wheelbase so can't be that much more.
definately not the only difference. No 1 is no LJ ever was sold with anything smaller than a d44 rear axle, and im not 100%, but im pretty sure the highest gear available was 3.73.
-
Stability of a short wheelbase versus a longer wheelbase probably plays into the rating. The ASE j standard (I can't remember the specific number) will tell you what they consider now when doing tow rating, if the companies follow the standard.
-
Yup. Forgot about the rear axle. I guess Jeep got smart when they quit putting the 35's in.
Sent from my SM-G920P using Tapatalk
-
Yup. Forgot about the rear axle. I guess Jeep got smart when they quit putting the 35's in.
Sent from my SM-G920P using Tapatalk
So you're saying they got smart with the JK release?
-
No. Are you insane! I mean the 44 axle in the LJ. The LJ was hands down jeeps best before the change.
Sent from my SM-G920P using Tapatalk
-
So you're saying they got smart with the JK release?
I'm 99% certain some 07's still had Dana 35's in the rear...
-
So you're saying they got smart with the JK release?
I'm 99% certain some 07's still had Dana 35's in the rear...
I'm 80% certain he is 100% correct. ^^^^
-
I know I guy..
-
I'm 99% certain some 07's still had Dana 35's in the rear...
[/quote]
So you're saying they got smart with the JK release?
I'm 99% certain some 07's still had Dana 35's in the rear...
I didn't believe you. But sure enough, Google found a post about a guy.....so it must be true.
-
I'm 99% certain some 07's still had Dana 35's in the rear...
Some even came without a front "driven" axle. Aka 2wd.
So you're saying they got smart with the JK release?
I'm 99% certain some 07's still had Dana 35's in the rear...
I didn't believe you. But sure enough, Google found a post about a guy.....so it must be true.
[/quote]
Sent from my SM-G860P using Tapatalk
-
I know about the 2wd (sister in law had one) but I didnt know about the 35. It was short-lived though...
Sent from my SM-G900V using Tapatalk
-
D35 makes no sense as they have different wms, brackets,etc so they couldn't use left overs but maybe they built them for the 2wd
-
http://www.palmerdodgegeorgia.com/exotic-new/Jeep/2017-Jeep-Wrangler+Unlimited-Roswell-GA-dd5ef1130a0e0a175837ce58e6ed307e.htm?_vsrefdom=SM_SEM&utm_source=Facebook_Dpa_Rt&utm_campaign=FacebookDpaRt&utm_medium=Social
-
http://www.palmerdodgegeorgia.com/exotic-new/Jeep/2017-Jeep-Wrangler+Unlimited-Roswell-GA-dd5ef1130a0e0a175837ce58e6ed307e.htm?_vsrefdom=SM_SEM&utm_source=Facebook_Dpa_Rt&utm_campaign=FacebookDpaRt&utm_medium=Social
Holy shit that's one of the ugliest JKs I've ever seen. And $80k????
-
Need to drop reading all those succient tcdawg posts and rush over there
-
http://www.palmerdodgegeorgia.com/exotic-new/Jeep/2017-Jeep-Wrangler+Unlimited-Roswell-GA-dd5ef1130a0e0a175837ce58e6ed307e.htm?_vsrefdom=SM_SEM&utm_source=Facebook_Dpa_Rt&utm_campaign=FacebookDpaRt&utm_medium=Social
Holy shit that's one of the ugliest JKs I've ever seen. And $80k????
I am going to go look at it tonight. I'm pre-qualified for the loan, so we'll see.
-
http://www.palmerdodgegeorgia.com/exotic-new/Jeep/2017-Jeep-Wrangler+Unlimited-Roswell-GA-dd5ef1130a0e0a175837ce58e6ed307e.htm?_vsrefdom=SM_SEM&utm_source=Facebook_Dpa_Rt&utm_campaign=FacebookDpaRt&utm_medium=Social
Holy shit that's one of the ugliest JKs I've ever seen. And $80k????
I am going to go look at it tonight. I'm pre-qualified for the loan, so we'll see.
i sure hope you get it.
-
http://www.palmerdodgegeorgia.com/exotic-new/Jeep/2017-Jeep-Wrangler+Unlimited-Roswell-GA-dd5ef1130a0e0a175837ce58e6ed307e.htm?_vsrefdom=SM_SEM&utm_source=Facebook_Dpa_Rt&utm_campaign=FacebookDpaRt&utm_medium=Social
Holy shit that's one of the ugliest JKs I've ever seen. And $80k????
I am going to go look at it tonight. I'm pre-qualified for the loan, so we'll see.
i sure hope you get it.
I'm not sure why he'd want that when gems like this are available:
(https://uploads.tapatalk-cdn.com/20170126/09132cd2cd4fb460f94f02e27ac33e25.jpg)
Sent from my SM-G900V using Tapatalk
-
http://www.palmerdodgegeorgia.com/exotic-new/Jeep/2017-Jeep-Wrangler+Unlimited-Roswell-GA-dd5ef1130a0e0a175837ce58e6ed307e.htm?_vsrefdom=SM_SEM&utm_source=Facebook_Dpa_Rt&utm_campaign=FacebookDpaRt&utm_medium=Social
Holy shit that's one of the ugliest JKs I've ever seen. And $80k????
I am going to go look at it tonight. I'm pre-qualified for the loan, so we'll see.
i sure hope you get it.
I'm not sure why he'd want that when gems like this are available:
(https://uploads.tapatalk-cdn.com/20170126/09132cd2cd4fb460f94f02e27ac33e25.jpg)
Sent from my SM-G900V using Tapatalk
I thought that was Clark's overlanding rig?
Is that seriously available?
Sent from my SM-G930V using Tapatalk
-
Don't make no nevermind.....
You got rid of your old pink cased phone.....
-
http://www.palmerdodgegeorgia.com/exotic-new/Jeep/2017-Jeep-Wrangler+Unlimited-Roswell-GA-dd5ef1130a0e0a175837ce58e6ed307e.htm?_vsrefdom=SM_SEM&utm_source=Facebook_Dpa_Rt&utm_campaign=FacebookDpaRt&utm_medium=Social
Holy shit that's one of the ugliest JKs I've ever seen. And $80k????
I am going to go look at it tonight. I'm pre-qualified for the loan, so we'll see.
i sure hope you get it.
I'm not sure why he'd want that when gems like this are available:
(https://uploads.tapatalk-cdn.com/20170126/09132cd2cd4fb460f94f02e27ac33e25.jpg)
Sent from my SM-G900V using Tapatalk
I thought that was Clark's overlanding rig?
BMW of Boston had it at one point. I'm sure @Danny Kinder would love to help you "build" this
-
I saw it in person..... truly an ugly as hell rig. Money spent for no reason other than no one else has one..... It's because no one else wants one.
-
I saw it in person..... truly an ugly as hell rig. Money spent for no reason other than no one else has one..... It's because no one else wants one.
I know one person who likes it.
Sent from my SM-G930V using Tapatalk
-
Well, hope I didn't stir someone up but its JMHO.......
-
Well, hope I didn't stir someone up but its JMHO.......
Don't worry... Clark's the one stirring things up.
-
Well, hope I didn't stir someone up but its JMHO.......
Don't worry... Clark's the one stirring things up.
figured as much but you never know who's going to be but hurt about things these days. LOL
-
They sure hold their value stock these days. Maybe better than modified.
http://www.getteltoyotaofbradenton.com/used/Jeep/2015-Jeep-Wrangler+Unlimited-c2cd56fd0a0e0a1725c5dc923e43cd11.htm
-
So coooool
http://frederick.craigslist.org/cto/5964346114.html
-
So coooool
http://frederick.craigslist.org/cto/5964346114.html
That is very cool.
-
So coooool
http://frederick.craigslist.org/cto/5964346114.html
That is very cool.
Very unique, like that
-
Love it!
-
https://greenville.craigslist.org/pts/5941410499.html
-
https://greenville.craigslist.org/pts/5941410499.html
Wow, he's right they are hard to come by, but he's wrong on its value. $2500 is far above its worth and opportunity cost.
-
https://greenville.craigslist.org/pts/5941410499.html
Wow, he's right they are hard to come by, but he's wrong on its value. $2500 is far above its worth and opportunity cost.
I don't think I seen one that high. Would rather have the new stuff.
Sent from my SM-G935V using Tapatalk
-
Thinking about trading up. I've got a stock 2010 JKU Sahara 6 speed manual. Would this be worth it for the locker, lift, and 4:10 gears, or should I just stick with mine and slowly build it up myself?
http://www.palmerdodgegeorgia.com/used/Jeep/2014-Jeep-Wrangler+Unlimited-Roswell-GA-2b7931870a0e0ae8294096d1c047a9e6.htm
Sent from my iPhone using Tapatalk
-
https://winstonsalem.craigslist.org/cto/5982446200.html
-
Thinking about trading up. I've got a stock 2010 JKU Sahara 6 speed manual. Would this be worth it for the locker, lift, and 4:10 gears, or should I just stick with mine and slowly build it up myself?
http://www.palmerdodgegeorgia.com/used/Jeep/2014-Jeep-Wrangler+Unlimited-Roswell-GA-2b7931870a0e0ae8294096d1c047a9e6.htm
Sent from my iPhone using Tapatalk
It would depend on what they give you for yours. Seems like a pretty good deal
-
Doing gears, lockers and 4:1 transfer case in yours is bound to be $4-5k. Lift is another $1-2k. These are ballpark....
Biggest question is what your plans are for the Jeep if you had these upgrades.
At some point it might be cheaper to sell yours are find one built like the one you linked to.
Sent from my SM-G935V using Tapatalk
-
Thinking about trading up. I've got a stock 2010 JKU Sahara 6 speed manual. Would this be worth it for the locker, lift, and 4:10 gears, or should I just stick with mine and slowly build it up myself?
http://www.palmerdodgegeorgia.com/used/Jeep/2014-Jeep-Wrangler+Unlimited-Roswell-GA-2b7931870a0e0ae8294096d1c047a9e6.htm
Sent from my iPhone using Tapatalk
It would depend on what they give you for yours. Seems like a pretty good deal
I think it's a great deal, but I'm probably a few grand upside down in mine I would assume.
Sent from my iPhone using Tapatalk
-
I think it's a great deal, but I'm probably a few grand upside down in mine I would assume.
Kelly Blue Book as a Cash Offer program that will let you know exactly what you'll get. I did it with my old JKU and got more than I would've on a straight trade (based on phone calls I had made).
-
54000 miles... any warranty left on that year?
i would want to crawl under it and look under the carpet before I may any decisions.
Photos always look better.
-
Thinking about trading up. I've got a stock 2010 JKU Sahara 6 speed manual. Would this be worth it for the locker, lift, and 4:10 gears, or should I just stick with mine and slowly build it up myself?
http://www.palmerdodgegeorgia.com/used/Jeep/2014-Jeep-Wrangler+Unlimited-Roswell-GA-2b7931870a0e0ae8294096d1c047a9e6.htm
Sent from my iPhone using Tapatalk
Wrecked in October, traded by November.
10/02/2016 Georgia
Damage Report Accident reported
Involving left rear impact
Moderate damage reported
Airbags did not deploy
11/03/2016 54,013 Dealer Inventory Vehicle offered for sale
-
Thinking about trading up. I've got a stock 2010 JKU Sahara 6 speed manual. Would this be worth it for the locker, lift, and 4:10 gears, or should I just stick with mine and slowly build it up myself?
http://www.palmerdodgegeorgia.com/used/Jeep/2014-Jeep-Wrangler+Unlimited-Roswell-GA-2b7931870a0e0ae8294096d1c047a9e6.htm
Sent from my iPhone using Tapatalk
Wrecked in October, traded by November.
10/02/2016 Georgia
Damage Report Accident reported
Involving left rear impact
Moderate damage reported
Airbags did not deploy
11/03/2016 54,013 Dealer Inventory Vehicle offered for sale
clarke saving the day
-
Thinking about trading up. I've got a stock 2010 JKU Sahara 6 speed manual. Would this be worth it for the locker, lift, and 4:10 gears, or should I just stick with mine and slowly build it up myself?
http://www.palmerdodgegeorgia.com/used/Jeep/2014-Jeep-Wrangler+Unlimited-Roswell-GA-2b7931870a0e0ae8294096d1c047a9e6.htm
Sent from my iPhone using Tapatalk
Wrecked in October, traded by November.
10/02/2016 Georgia
Damage Report Accident reported
Involving left rear impact
Moderate damage reported
Airbags did not deploy
11/03/2016 54,013 Dealer Inventory Vehicle offered for sale
clarke saving the day
I had a moment of insanity and thought about getting it...whew!!!
-
Thinking about trading up. I've got a stock 2010 JKU Sahara 6 speed manual. Would this be worth it for the locker, lift, and 4:10 gears, or should I just stick with mine and slowly build it up myself?
http://www.palmerdodgegeorgia.com/used/Jeep/2014-Jeep-Wrangler+Unlimited-Roswell-GA-2b7931870a0e0ae8294096d1c047a9e6.htm
Sent from my iPhone using Tapatalk
Wrecked in October, traded by November.
10/02/2016 Georgia
Damage ReportAccident reported
Involving left rear impact
Moderate damage reported
Airbags did not deploy
11/03/2016 54,013 Dealer InventoryVehicle offered for sale
clarke saving the day
I had a moment of insanity and thought about getting it...whew!!!
Thanks gentlemen!!! I needed that, saving me from myself!!!
Sent from my iPhone using Tapatalk
-
Not a big deal, we bang the corners anyway. We don't have show cars.
Wait, MOST of us don't have show cars.
-
I would inspect the corners/rear/fenders area thoroughly and if nothing found and proper repair seen, use that as leverage in the deal. Wouldn't scare me away.
Clark - you got a free carfax account or something?
Danny would prob agree, but the whole "wreck" thing is all relative, the only ones id def stay away from are water/flood damaged and fires. Airbag deployment is so common in todays collision industry AND its extremely well regulated. If they catch you installing and or not installing what the OEM requires thats it for your business. Not that all shop owners give a shit lol, but most do. All im saying in addition to what Don said, look it over, if the repair is enough to worry about it will be obvious, other than that beat em down on the price and get you a deal.
-
This is right down the road from me if anyone wants it. Can bring to CFR
(https://uploads.tapatalk-cdn.com/20170216/998efcc79aa165529241f27bbbf1c3d1.jpg)
Sent from my SM-G900V using Tapatalk
-
^^^ That's Ty from 4low Offroad Magazine. He will be at CFR!
Sent from my iPhone using Tapatalk
-
^^^ That's Ty from 4low Offroad Magazine. He will be at CFR!
Sent from my iPhone using Tapatalk
I thought he was, but when I ran into him a few weeks ago to get my new 4Low issue (with the CFR writeup!) he sounded like it wasn't definite. I'm sure he'll be there though
-
He told me the other he would be. I guess we will see.
Sent from my iPhone using Tapatalk
-
http://www.daveysjeeps.com/repairables/R787444.html
-
http://www.daveysjeeps.com/repairables/R787444.html
The frame pull concerned me...should it?
-
http://www.daveysjeeps.com/repairables/R787444.html
The frame pull concerned me...should it?
I would be
-
For the right price and if it was destined to be a trail rig and if I knew someone (Justin) that did the same thing and if I knew someone (Justin) that could do the work.... I wouldn't rule it out.
But sight unseen would be tough.
Sent from my SM-G935V using Tapatalk
-
For the right price and if it was destined to be a trail rig and if I knew someone (Justin) that did the same thing and if I knew someone (Justin) that could do the work.... I wouldn't rule it out.
But sight unseen would be tough.
Sent from my SM-G935V using Tapatalk
thats more like a frame jack lol.. if you can get good enough pictures then it wouldnt be too much risk. I ended up just cutting mine in half because it was so much worse than i thought. ALSO, alot of folks assume frame when they see the front out of whack and its usually just arms, not saying thats the case here, just IMO.
-
For the right price and if it was destined to be a trail rig and if I knew someone (Justin) that did the same thing and if I knew someone (Justin) that could do the work.... I wouldn't rule it out.
But sight unseen would be tough.
Sent from my SM-G935V using Tapatalk
thats more like a frame jack lol.. if you can get good enough pictures then it wouldnt be too much risk. I ended up just cutting mine in half because it was so much worse than i thought. ALSO, alot of folks assume frame when they see the front out of whack and its usually just arms, not saying thats the case here, just IMO.
Jack meaning worse?
That pass fender is crinkled pretty good...
-
For the right price and if it was destined to be a trail rig and if I knew someone (Justin) that did the same thing and if I knew someone (Justin) that could do the work.... I wouldn't rule it out.
But sight unseen would be tough.
Sent from my SM-G935V using Tapatalk
thats more like a frame jack lol.. if you can get good enough pictures then it wouldnt be too much risk. I ended up just cutting mine in half because it was so much worse than i thought. ALSO, alot of folks assume frame when they see the front out of whack and its usually just arms, not saying thats the case here, just IMO.
Jack meaning worse?
That pass fender is crinkled pretty good...
Frame swap
-
For the right price and if it was destined to be a trail rig and if I knew someone (Justin) that did the same thing and if I knew someone (Justin) that could do the work.... I wouldn't rule it out.
But sight unseen would be tough.
Sent from my SM-G935V using Tapatalk
thats more like a frame jack lol.. if you can get good enough pictures then it wouldnt be too much risk. I ended up just cutting mine in half because it was so much worse than i thought. ALSO, alot of folks assume frame when they see the front out of whack and its usually just arms, not saying thats the case here, just IMO.
Jack meaning worse?
That pass fender is crinkled pretty good...
Frame swap
neither.. most of those are just pushed down on one side, they would get tied down behind the damage and just jacked back up into spec. kinda like the doc rebreaking an arm to set it.
-
For the right price and if it was destined to be a trail rig and if I knew someone (Justin) that did the same thing and if I knew someone (Justin) that could do the work.... I wouldn't rule it out.
But sight unseen would be tough.
Sent from my SM-G935V using Tapatalk
thats more like a frame jack lol.. if you can get good enough pictures then it wouldnt be too much risk. I ended up just cutting mine in half because it was so much worse than i thought. ALSO, alot of folks assume frame when they see the front out of whack and its usually just arms, not saying thats the case here, just IMO.
Jack meaning worse?
That pass fender is crinkled pretty good...
Frame swap
neither.. most of those are just pushed down on one side, they would get tied down behind the damage and just jacked back up into spec. kinda like the doc rebreaking an arm to set it.
Understood thanks, want to go in on it? You fix it and sell it to me for cost you have in it?
-
For the right price and if it was destined to be a trail rig and if I knew someone (Justin) that did the same thing and if I knew someone (Justin) that could do the work.... I wouldn't rule it out.
But sight unseen would be tough.
Sent from my SM-G935V using Tapatalk
thats more like a frame jack lol.. if you can get good enough pictures then it wouldnt be too much risk. I ended up just cutting mine in half because it was so much worse than i thought. ALSO, alot of folks assume frame when they see the front out of whack and its usually just arms, not saying thats the case here, just IMO.
Jack meaning worse?
That pass fender is crinkled pretty good...
Frame swap
neither.. most of those are just pushed down on one side, they would get tied down behind the damage and just jacked back up into spec. kinda like the doc rebreaking an arm to set it.
Understood thanks, want to go in on it? You fix it and sell it to me for cost you have in it?
send it to me //cheers2// its gonna be few weeks before i can get on it, but we can work it out for sure. Ill email daveys and get some frame pictures if they will send em.
-
Uh oh d-money. No time for cold feet now. Pull the trigger
-
Do it!!!
Sent from my iPhone using Tapatalk
-
A good deal on the latest GoPro (Hero 5 Black) $340 no tax/shipping
http://www.rakuten.com/prod/gopro-hero5-black-camera/q/sellerid/15637407/304707372.html?scid=em_Promotional_20170223_Daily&adid=17654&rmatt=tsid:1012038|cid:4438|cgid:44383068682
-
Any TJ/LJ guys looking for stock Rubicon axles?
http://www.hardlinecrawlers.com/forums/index.php?topic=54628.0
-
@Doug Could be a cool project...
http://www.hardlinecrawlers.com/forums/index.php?topic=55044.0
-
@Doug Could be a cool project...
http://www.hardlinecrawlers.com/forums/index.php?topic=55044.0
Love the color!
-
@Doug Could be a cool project...
http://www.hardlinecrawlers.com/forums/index.php?topic=55044.0
@Doug Could be a cool project...
http://www.hardlinecrawlers.com/forums/index.php?topic=55044.0
He doesn't need the LJ project and this one too
-
@Doug Could be a cool project...
http://www.hardlinecrawlers.com/forums/index.php?topic=55044.0
Damn sure could ... Is... But not for me right now. Too far from what I see as me anyway.
Thanks John
-
@Doug Could be a cool project...
http://www.hardlinecrawlers.com/forums/index.php?topic=55044.0
Damn sure could ... Is... But not for me right now. Too far from what I see as me anyway.
Thanks John
I considered it for a second, but backed out for some reason.
-
@Doug Could be a cool project...
http://www.hardlinecrawlers.com/forums/index.php?topic=55044.0
Damn sure could ... Is... But not for me right now. Too far from what I see as me anyway.
Thanks John
I considered it for a second, but backed out for some reason.
Commitment issues? Yeah me too, i get excited and then snap back to reality...
1 or 2 in college the next 6 years.
And to think i wanted 6
-
@Doug Could be a cool project...
http://www.hardlinecrawlers.com/forums/index.php?topic=55044.0
Love the color!
Color looks terrible
Sent from my iPhone using Tapatalk
-
@Doug Could be a cool project...
http://www.hardlinecrawlers.com/forums/index.php?topic=55044.0
Love the color!
Color looks terrible
Sent from my iPhone using Tapatalk
You look terrible
Sent from my SM-G900V using Tapatalk
-
@Doug Could be a cool project...
http://www.hardlinecrawlers.com/forums/index.php?topic=55044.0
Love the color!
Color looks terrible
Sent from my iPhone using Tapatalk
You look terrible
Sent from my SM-G900V using Tapatalk
Be nice poopoo pants
Sent from my iPhone using Tapatalk
-
Oh he's been holding on to that one
-
Oh he's been holding on to that one
I held onto that one longer than patti held onto his poops
Sent from my iPhone using Tapatalk
-
Someone needs to wipe these threads clean
-
Someone needs to wipe these threads clean
Wipe
Sent from my iPhone using Tapatalk
-
So much want...
https://www.rockcrawlersforsale.com/autos/buggy/1-seater/unlimited-class-comp-buggy-1074.html
-
So much want...
https://www.rockcrawlersforsale.com/autos/buggy/1-seater/unlimited-class-comp-buggy-1074.html
I wonder how low you could get him.
-
So much want...
https://www.rockcrawlersforsale.com/autos/buggy/1-seater/unlimited-class-comp-buggy-1074.html
I wonder how low you could get him.
You got the bonus check burning a hole in your pocket... could be your opportunity!
I do think it seems kind of cheap considering the parts list
-
So much want...
https://www.rockcrawlersforsale.com/autos/buggy/1-seater/unlimited-class-comp-buggy-1074.html
I wonder how low you could get him.
You got the bonus check burning a hole in your pocket... could be your opportunity!
I do think it seems kind of cheap considering the parts list
I agree on value. I doubt I could get into it, or worse, get out of it if I needed to in an emergency!
-
So much want...
https://www.rockcrawlersforsale.com/autos/buggy/1-seater/unlimited-class-comp-buggy-1074.html
I wonder how low you could get him.
You got the bonus check burning a hole in your pocket... could be your opportunity!
I do think it seems kind of cheap considering the parts list
I agree on value. I doubt I could get into it, or worse, get out of it if I needed to in an emergency!
I doubt you'll get into emergency situations, no room for a passenger :)
-
Smoking deal, ha Jeff seen it?
-
So much want...
https://www.rockcrawlersforsale.com/autos/buggy/1-seater/unlimited-class-comp-buggy-1074.html
I wonder how low you could get him.
You got the bonus check burning a hole in your pocket... could be your opportunity!
I do think it seems kind of cheap considering the parts list
I agree on value. I doubt I could get into it, or worse, get out of it if I needed to in an emergency!
I doubt you'll get into emergency situations, no room for a passenger :)
Would you sit on Tony's lap or him in yours?
-
So much want...
https://www.rockcrawlersforsale.com/autos/buggy/1-seater/unlimited-class-comp-buggy-1074.html
I wonder how low you could get him.
You got the bonus check burning a hole in your pocket... could be your opportunity!
I do think it seems kind of cheap considering the parts list
I agree on value. I doubt I could get into it, or worse, get out of it if I needed to in an emergency!
I doubt you'll get into emergency situations, no room for a passenger :)
Would you sit on Tony's lap or him in yours?
I assume this is directed at @clark123456
-
^^^correct. Well I guess you can be a part of that if you want.
-
^^^correct. Well I guess you can be a part of that if you want.
@patman felt left out.
-
^^^correct. Well I guess you can be a part of that if you want.
Three's a crowd
-
^^^correct. Well I guess you can be a part of that if you want.
@patman felt left out.
That's #fakenews
-
If anyone finds a GREAT deal on beadlocks, let me know. I'm in no hurry and not planning on buying (new) until the Fall. Looking for 17" with 5x5 and 3.5" backspace. I don't want to run spacers. Thanks!
If I buy new in the Fall it will probably be Walker Evans or Raceline, maybe Hutchinson. But if I can find a good set used and save a significant amount, I'd rather do that.
-
If anyone finds a GREAT deal on beadlocks, let me know. I'm in no hurry and not planning on buying (new) until the Fall. Looking for 17" with 5x5 and 3.5" backspace. I don't want to run spacers. Thanks!
If I buy new in the Fall it will probably be Walker Evans or Raceline, maybe Hutchinson. But if I can find a good set used and save a significant amount, I'd rather do that.
My Racelines may be available soon...but they are for one tons....and the rings are scratched heavily.
-
If anyone finds a GREAT deal on beadlocks, let me know. I'm in no hurry and not planning on buying (new) until the Fall. Looking for 17" with 5x5 and 3.5" backspace. I don't want to run spacers. Thanks!
If I buy new in the Fall it will probably be Walker Evans or Raceline, maybe Hutchinson. But if I can find a good set used and save a significant amount, I'd rather do that.
My Racelines may be available soon...but they are for one tons....and the rings are scratched heavily.
Why? Air leaks?
-
If anyone finds a GREAT deal on beadlocks, let me know. I'm in no hurry and not planning on buying (new) until the Fall. Looking for 17" with 5x5 and 3.5" backspace. I don't want to run spacers. Thanks!
If I buy new in the Fall it will probably be Walker Evans or Raceline, maybe Hutchinson. But if I can find a good set used and save a significant amount, I'd rather do that.
My Racelines may be available soon...but they are for one tons....and the rings are scratched heavily.
going back to th 5 lug axles? smart decision
-
If anyone finds a GREAT deal on beadlocks, let me know. I'm in no hurry and not planning on buying (new) until the Fall. Looking for 17" with 5x5 and 3.5" backspace. I don't want to run spacers. Thanks!
If I buy new in the Fall it will probably be Walker Evans or Raceline, maybe Hutchinson. But if I can find a good set used and save a significant amount, I'd rather do that.
My Racelines may be available soon...but they are for one tons....and the rings are scratched heavily.
going back to th 5 lug axles? smart decision
Likely. Or I may switch to Hutchinson or staz.
-
If anyone finds a GREAT deal on beadlocks, let me know. I'm in no hurry and not planning on buying (new) until the Fall. Looking for 17" with 5x5 and 3.5" backspace. I don't want to run spacers. Thanks!
If I buy new in the Fall it will probably be Walker Evans or Raceline, maybe Hutchinson. But if I can find a good set used and save a significant amount, I'd rather do that.
My Racelines may be available soon...but they are for one tons....and the rings are scratched heavily.
going back to th 5 lug axles? smart decision
Likely. Or I may switch to Hutchinson or staz.
Hutchinson are heavy. Ship weight is around 60 pounds each.
Sent from my SM-G935V using Tapatalk
-
If anyone finds a GREAT deal on beadlocks, let me know. I'm in no hurry and not planning on buying (new) until the Fall. Looking for 17" with 5x5 and 3.5" backspace. I don't want to run spacers. Thanks!
If I buy new in the Fall it will probably be Walker Evans or Raceline, maybe Hutchinson. But if I can find a good set used and save a significant amount, I'd rather do that.
My Racelines may be available soon...but they are for one tons....and the rings are scratched heavily.
going back to th 5 lug axles? smart decision
Likely. Or I may switch to Hutchinson or staz.
Hutchinson are heavy. Ship weight is around 60 pounds each.
Sent from my SM-G935V using Tapatalk
That is pretty effing heavy! I'll do more research.
-
If anyone finds a GREAT deal on beadlocks, let me know. I'm in no hurry and not planning on buying (new) until the Fall. Looking for 17" with 5x5 and 3.5" backspace. I don't want to run spacers. Thanks!
If I buy new in the Fall it will probably be Walker Evans or Raceline, maybe Hutchinson. But if I can find a good set used and save a significant amount, I'd rather do that.
My Racelines may be available soon...but they are for one tons....and the rings are scratched heavily.
going back to th 5 lug axles? smart decision
Likely. Or I may switch to Hutchinson or staz.
Hutchinson are heavy. Ship weight is around 60 pounds each.
Sent from my SM-G935V using Tapatalk
That is pretty effing heavy! I'll do more research.
Hutchinson 55lbs, Walker Evans 37lbs, Raceline 42lbs.
My current non-beadlock wheels are 24lbs.
-
Diesel JK maxed out for the low, low price of ....
http://www.dupontregistry.com/autos/listing/2007/jeep/other--model/1579230 (http://www.dupontregistry.com/autos/listing/2007/jeep/other--model/1579230)
(http://www.dupontregistry.com/autos/virtual_folder/vehicle_photos/df6ddf35-3cbc-4f64-82b9-2f8f145aca07/b8d64097-4a2d-4ea6-844c-fbc8af49327d/2.jpg?404=privatelg&width=570&height=380)
-
I don't take seriously any build with a snorkel unless I see a pic with water over the hood. :)
-
That is insane!
Sent from my iPhone using Tapatalk
-
Wheeled with that rig in Moab. Point and shoot everywhere. Massive beast.
-
I would this is a good deal if you like manuals.
http://atlanta.craigslist.org/atl/cto/6031257437.html?lang=en
Sent from my iPhone using Tapatalk
-
not a bad price
-
I would this is a good deal if you like manuals.
http://atlanta.craigslist.org/atl/cto/6031257437.html?lang=en
Sent from my iPhone using Tapatalk
Nice for a daily driver like John's. Those are for those that will leave it almost stock.
The LJ I need wouldn't have any Rubicon left in it.
-
I am not up on the cost of Dana 30 stuff, so someone in the know can chime in and tell if this is a good deal on RCV's.
http://www.hardlinecrawlers.com/forums/index.php?topic=55033.0
-
I am not up on the cost of Dana 30 stuff, so someone in the know can chime in and tell if this is a good deal on RCV's.
http://www.hardlinecrawlers.com/forums/index.php?topic=55033.0
$1200 new.
I'd offer $750
-
Pretty sure warranty doesn't carry over. Not sure
Sent from my SM-G935V using Tapatalk
-
Did y'all see this?
2006 LJ
Black ext black int
218K miles
auto
soft top only
$7k
http://www.hardlinecrawlers.com/forums/index.php?topic=55296.msg646845#msg646845
(http://i898.photobucket.com/albums/ac182/tjsahara00/for%20sale/LJ%20%20-%20hardline_zpsaalonf2t.jpg) (http://s898.photobucket.com/user/tjsahara00/media/for%20sale/LJ%20%20-%20hardline_zpsaalonf2t.jpg.html)
-
Pretty sure warranty doesn't carry over. Not sure
Sent from my SM-G935V using Tapatalk
They do. My buddy has swapped out both sides after breaks. He told them he's not the original purchaser, they said they didn't care. This last time, he was upgraded to the 300m shafts for free since he broke twice on a d44 without ever breaking the r&p
-
Did y'all see this?
2006 LJ
6 speed. Nope.
-
Did y'all see this?
2006 LJ
6 speed. Nope.
@Doug The LJ is auto, the TJ is 6 speed...
-
The LJ is auto, the TJ is 6 speed...
Got it thanks, similar buy to Jareds.
-
The LJ is auto, the TJ is 6 speed...
Got it thanks, similar buy to Jareds.
Yup, you could just tell Allsouth to build Jared's again and you'll be rockin'. ;-)
-
The LJ is auto, the TJ is 6 speed...
Got it thanks, similar buy to Jareds.
Yup, you could just tell Allsouth to build Jared's again and you'll be rockin'. ;-)
His wheels are definitely turning
-
The LJ is auto, the TJ is 6 speed...
Got it thanks, similar buy to Jareds.
Yup, you could just tell Allsouth to build Jared's again and you'll be rockin'. ;-)
The LJ is auto, the TJ is 6 speed...
Got it thanks, similar buy to Jareds.
That's a good deal for anyone wanting to start a build from scratch.
Sent from my SM-G935V using Tapatalk
-
The LJ is auto, the TJ is 6 speed...
Got it thanks, similar buy to Jareds.
Yup, you could just tell Allsouth to build Jared's again and you'll be rockin'. ;-)
218k miles. Plan on a rebuild or replacement soon.
-
The LJ is auto, the TJ is 6 speed...
Got it thanks, similar buy to Jareds.
Yup, you could just tell Allsouth to build Jared's again and you'll be rockin'. ;-)
218k miles. Plan on a rebuild or replacement soon.
Time for a v8
Sent from my SM-G935V using Tapatalk
-
The LJ is auto, the TJ is 6 speed...
Got it thanks, similar buy to Jareds.
Yup, you could just tell Allsouth to build Jared's again and you'll be rockin'. ;-)
The LJ is auto, the TJ is 6 speed...
Got it thanks, similar buy to Jareds.
That's a good deal for anyone wanting to start a build from scratch.
Sent from my SM-G935V using Tapatalk
Especially if you're looking to do a moderate build. Easy duplicate.
-
I think this JKU is a good deal for $46k when you look at the mods.
http://www.palmerdodgegeorgia.com/used/Jeep/2015-Jeep-Wrangler+Unlimited-Roswell-GA-a36f91cc0a0e0a6b278b2504f2f08bec.htm?_vsrefdom=SM_SEM&utm_source=Facebook_Dpa_RtUsed&utm_campaign=FacebookDpaRtUsed&utm_medium=Social (http://www.palmerdodgegeorgia.com/used/Jeep/2015-Jeep-Wrangler+Unlimited-Roswell-GA-a36f91cc0a0e0a6b278b2504f2f08bec.htm?_vsrefdom=SM_SEM&utm_source=Facebook_Dpa_RtUsed&utm_campaign=FacebookDpaRtUsed&utm_medium=Social)
RUBICON HARD ROCK UNLIMITED 4 DOOR 4X4, 37 INCH TIRES, METALCLOAK 3.5 INCH GAMECHANGER LIFT WITH 6PAK SHOCKS, TWF WHEELS WITH WELDED COLOR MATCHED ROCK RINGS, JCR CRUSADER SLIDERS WITH LED, ROCKLIGHTS, JCR FENDERS AND TURNSIGNALS, JCR INNER FENDERS, MAXIMUS3 FRONT STINGER BUMPER, MAXIMUS3 WINCH, MAXIMUS3 REAR TIRECARRIER, KING BUMPSTOPS, ARTEC TRUSS SKIDS, 4.88 NIRTO GEARS FRONT AND BACK, POISON SPYDER BOMBSHELL COVERS, HYDRO ASSIST STEERING, STEER SMARTS YETI HEAVY DUTY DRAGLINK AND 1.625 TIE ROD, REID RACING KNUCKLES, SYNERGY HD UPPER AND LOWER BALLJOINTS, SPIDERTRAX 1.5 INCH SPACERS, CENTRAMATIC WHEEL BALANCERS, LED HALO HEADLIGHTS, MAGNAFLOW Y PIPE/LOOP DELETE, MAGNAFLOW CATBACK ROCK CRAWLER HIGH CLEARANCE EXHAUST, ADAMS HD FONT AND REAR DRIVESHAFT, FRONT AN REAR GRABBERS, HILIFT JACK AND MUNT, BUSHWACKER JEEP TRAIL ARMOR HOOD AND TAILGATE PROTECTOR, RUGGE RIDGE ALLUMINUM HOOD LATCHES, GPS / NAVIGATION, REAR BACK UP CAMERA, AUTOMATIC TRANSMISSION, 6.5 INCH TOUCHSCREEN, CONNECTIVITY GROUP, POWER CONVENIENCE GROUP, LEATHER INTERIOR, HEATED SEATS, PAINTED HARD TOP, HILL DESCENT CONTROL, AXLE LOCK, SWAY BAR DISCONNECT, ALPINE 9 SPEAKERS WITH ALL WEATHER SUBWOOFER, SATELLITE RADIO, KEYLESS ENTRY, REMOTE START, UCONNECT VOICE COMMAND WITH BLUETOOTH, STEERING WHEEL MOUNTED AUDIO CONTROLS, TOWING PACKAGE / HITCH, TIRE PRESSURE MONITORING DISPLAY, ALL POWER AND MUCH MORE, CARFAX CERTIFIED, INCLUDES THE REMAINDER OF THE FACTORY WARRANTY, and EXTENDED WARRANTY AVAILABLE.
-
The LJ is auto, the TJ is 6 speed...
Got it thanks, similar buy to Jareds.
Yup, you could just tell Allsouth to build Jared's again and you'll be rockin'. ;-)
The LJ is auto, the TJ is 6 speed...
Got it thanks, similar buy to Jareds.
That's a good deal for anyone wanting to start a build from scratch.
Sent from my SM-G935V using Tapatalk
Especially if you're looking to do a moderate build. Easy duplicate.
Easy on the wallet, too.
Sent from my SM-G935V using Tapatalk
-
I don't know much about Toyota's so not sure if $6500 is a good deal.
http://athensdriveline.com/for-sale/4062147 (http://athensdriveline.com/for-sale/4062147)
• Vertical propane tanks
• Reversed front springs
• Repositioned and rebuilt front spring perches
• Spun military wraps and redrilled
• Onboard air
• Custom driveshaft
• Rear disconnect
• Birfield eliminator
• Dual trans case
• 488 gears
• Rock lights
• Tires 39.5 x 13.5 x 15
(http://athensdriveline.com/communities/8/000/001/999/558//images/11539197.jpg)
-
I think this JKU is a good deal for $46k when you look at the mods.
http://www.palmerdodgegeorgia.com/used/Jeep/2015-Jeep-Wrangler+Unlimited-Roswell-GA-a36f91cc0a0e0a6b278b2504f2f08bec.htm?_vsrefdom=SM_SEM&utm_source=Facebook_Dpa_RtUsed&utm_campaign=FacebookDpaRtUsed&utm_medium=Social (http://www.palmerdodgegeorgia.com/used/Jeep/2015-Jeep-Wrangler+Unlimited-Roswell-GA-a36f91cc0a0e0a6b278b2504f2f08bec.htm?_vsrefdom=SM_SEM&utm_source=Facebook_Dpa_RtUsed&utm_campaign=FacebookDpaRtUsed&utm_medium=Social)
RUBICON HARD ROCK UNLIMITED 4 DOOR 4X4, 37 INCH TIRES, METALCLOAK 3.5 INCH GAMECHANGER LIFT WITH 6PAK SHOCKS, TWF WHEELS WITH WELDED COLOR MATCHED ROCK RINGS, JCR CRUSADER SLIDERS WITH LED, ROCKLIGHTS, JCR FENDERS AND TURNSIGNALS, JCR INNER FENDERS, MAXIMUS3 FRONT STINGER BUMPER, MAXIMUS3 WINCH, MAXIMUS3 REAR TIRECARRIER, KING BUMPSTOPS, ARTEC TRUSS SKIDS, 4.88 NIRTO GEARS FRONT AND BACK, POISON SPYDER BOMBSHELL COVERS, HYDRO ASSIST STEERING, STEER SMARTS YETI HEAVY DUTY DRAGLINK AND 1.625 TIE ROD, REID RACING KNUCKLES, SYNERGY HD UPPER AND LOWER BALLJOINTS, SPIDERTRAX 1.5 INCH SPACERS, CENTRAMATIC WHEEL BALANCERS, LED HALO HEADLIGHTS, MAGNAFLOW Y PIPE/LOOP DELETE, MAGNAFLOW CATBACK ROCK CRAWLER HIGH CLEARANCE EXHAUST, ADAMS HD FONT AND REAR DRIVESHAFT, FRONT AN REAR GRABBERS, HILIFT JACK AND MUNT, BUSHWACKER JEEP TRAIL ARMOR HOOD AND TAILGATE PROTECTOR, RUGGE RIDGE ALLUMINUM HOOD LATCHES, GPS / NAVIGATION, REAR BACK UP CAMERA, AUTOMATIC TRANSMISSION, 6.5 INCH TOUCHSCREEN, CONNECTIVITY GROUP, POWER CONVENIENCE GROUP, LEATHER INTERIOR, HEATED SEATS, PAINTED HARD TOP, HILL DESCENT CONTROL, AXLE LOCK, SWAY BAR DISCONNECT, ALPINE 9 SPEAKERS WITH ALL WEATHER SUBWOOFER, SATELLITE RADIO, KEYLESS ENTRY, REMOTE START, UCONNECT VOICE COMMAND WITH BLUETOOTH, STEERING WHEEL MOUNTED AUDIO CONTROLS, TOWING PACKAGE / HITCH, TIRE PRESSURE MONITORING DISPLAY, ALL POWER AND MUCH MORE, CARFAX CERTIFIED, INCLUDES THE REMAINDER OF THE FACTORY WARRANTY, and EXTENDED WARRANTY AVAILABLE.
If that is exactly and i mean exactly in every way what you would do or are going to do, it is cheaper than doing it.
Rarely would you ever find a flashy build like that and it be really what you would do.
It needed axles way before a lot of that stuff.
I don't think it's anymore capable than your jeep.
-
Oxymoron (https://uploads.tapatalk-cdn.com/20170307/f102f08261fa0e58793864b28aa53643.jpg)
-
I think this JKU is a good deal for $46k when you look at the mods.
http://www.palmerdodgegeorgia.com/used/Jeep/2015-Jeep-Wrangler+Unlimited-Roswell-GA-a36f91cc0a0e0a6b278b2504f2f08bec.htm?_vsrefdom=SM_SEM&utm_source=Facebook_Dpa_RtUsed&utm_campaign=FacebookDpaRtUsed&utm_medium=Social (http://www.palmerdodgegeorgia.com/used/Jeep/2015-Jeep-Wrangler+Unlimited-Roswell-GA-a36f91cc0a0e0a6b278b2504f2f08bec.htm?_vsrefdom=SM_SEM&utm_source=Facebook_Dpa_RtUsed&utm_campaign=FacebookDpaRtUsed&utm_medium=Social)
RUBICON HARD ROCK UNLIMITED 4 DOOR 4X4, 37 INCH TIRES, METALCLOAK 3.5 INCH GAMECHANGER LIFT WITH 6PAK SHOCKS, TWF WHEELS WITH WELDED COLOR MATCHED ROCK RINGS, JCR CRUSADER SLIDERS WITH LED, ROCKLIGHTS, JCR FENDERS AND TURNSIGNALS, JCR INNER FENDERS, MAXIMUS3 FRONT STINGER BUMPER, MAXIMUS3 WINCH, MAXIMUS3 REAR TIRECARRIER, KING BUMPSTOPS, ARTEC TRUSS SKIDS, 4.88 NIRTO GEARS FRONT AND BACK, POISON SPYDER BOMBSHELL COVERS, HYDRO ASSIST STEERING, STEER SMARTS YETI HEAVY DUTY DRAGLINK AND 1.625 TIE ROD, REID RACING KNUCKLES, SYNERGY HD UPPER AND LOWER BALLJOINTS, SPIDERTRAX 1.5 INCH SPACERS, CENTRAMATIC WHEEL BALANCERS, LED HALO HEADLIGHTS, MAGNAFLOW Y PIPE/LOOP DELETE, MAGNAFLOW CATBACK ROCK CRAWLER HIGH CLEARANCE EXHAUST, ADAMS HD FONT AND REAR DRIVESHAFT, FRONT AN REAR GRABBERS, HILIFT JACK AND MUNT, BUSHWACKER JEEP TRAIL ARMOR HOOD AND TAILGATE PROTECTOR, RUGGE RIDGE ALLUMINUM HOOD LATCHES, GPS / NAVIGATION, REAR BACK UP CAMERA, AUTOMATIC TRANSMISSION, 6.5 INCH TOUCHSCREEN, CONNECTIVITY GROUP, POWER CONVENIENCE GROUP, LEATHER INTERIOR, HEATED SEATS, PAINTED HARD TOP, HILL DESCENT CONTROL, AXLE LOCK, SWAY BAR DISCONNECT, ALPINE 9 SPEAKERS WITH ALL WEATHER SUBWOOFER, SATELLITE RADIO, KEYLESS ENTRY, REMOTE START, UCONNECT VOICE COMMAND WITH BLUETOOTH, STEERING WHEEL MOUNTED AUDIO CONTROLS, TOWING PACKAGE / HITCH, TIRE PRESSURE MONITORING DISPLAY, ALL POWER AND MUCH MORE, CARFAX CERTIFIED, INCLUDES THE REMAINDER OF THE FACTORY WARRANTY, and EXTENDED WARRANTY AVAILABLE.
If that is exactly and i mean exactly in every way what you would do or are going to do, it is cheaper than doing it.
Rarely would you ever find a flashy build like that and it be really what you would do.
It needed axles way before a lot of that stuff.
I don't think it's anymore capable than your jeep.
I agree, no way more capable than mine. But if someone was looking for a JKU, this is a great deal to start with instead of building it.
-
https://greenville.craigslist.org/pts/6027658967.html
-
I think this JKU is a good deal for $46k when you look at the mods.
http://www.palmerdodgegeorgia.com/used/Jeep/2015-Jeep-Wrangler+Unlimited-Roswell-GA-a36f91cc0a0e0a6b278b2504f2f08bec.htm?_vsrefdom=SM_SEM&utm_source=Facebook_Dpa_RtUsed&utm_campaign=FacebookDpaRtUsed&utm_medium=Social (http://www.palmerdodgegeorgia.com/used/Jeep/2015-Jeep-Wrangler+Unlimited-Roswell-GA-a36f91cc0a0e0a6b278b2504f2f08bec.htm?_vsrefdom=SM_SEM&utm_source=Facebook_Dpa_RtUsed&utm_campaign=FacebookDpaRtUsed&utm_medium=Social)
RUBICON HARD ROCK UNLIMITED 4 DOOR 4X4, 37 INCH TIRES, METALCLOAK 3.5 INCH GAMECHANGER LIFT WITH 6PAK SHOCKS, TWF WHEELS WITH WELDED COLOR MATCHED ROCK RINGS, JCR CRUSADER SLIDERS WITH LED, ROCKLIGHTS, JCR FENDERS AND TURNSIGNALS, JCR INNER FENDERS, MAXIMUS3 FRONT STINGER BUMPER, MAXIMUS3 WINCH, MAXIMUS3 REAR TIRECARRIER, KING BUMPSTOPS, ARTEC TRUSS SKIDS, 4.88 NIRTO GEARS FRONT AND BACK, POISON SPYDER BOMBSHELL COVERS, HYDRO ASSIST STEERING, STEER SMARTS YETI HEAVY DUTY DRAGLINK AND 1.625 TIE ROD, REID RACING KNUCKLES, SYNERGY HD UPPER AND LOWER BALLJOINTS, SPIDERTRAX 1.5 INCH SPACERS, CENTRAMATIC WHEEL BALANCERS, LED HALO HEADLIGHTS, MAGNAFLOW Y PIPE/LOOP DELETE, MAGNAFLOW CATBACK ROCK CRAWLER HIGH CLEARANCE EXHAUST, ADAMS HD FONT AND REAR DRIVESHAFT, FRONT AN REAR GRABBERS, HILIFT JACK AND MUNT, BUSHWACKER JEEP TRAIL ARMOR HOOD AND TAILGATE PROTECTOR, RUGGE RIDGE ALLUMINUM HOOD LATCHES, GPS / NAVIGATION, REAR BACK UP CAMERA, AUTOMATIC TRANSMISSION, 6.5 INCH TOUCHSCREEN, CONNECTIVITY GROUP, POWER CONVENIENCE GROUP, LEATHER INTERIOR, HEATED SEATS, PAINTED HARD TOP, HILL DESCENT CONTROL, AXLE LOCK, SWAY BAR DISCONNECT, ALPINE 9 SPEAKERS WITH ALL WEATHER SUBWOOFER, SATELLITE RADIO, KEYLESS ENTRY, REMOTE START, UCONNECT VOICE COMMAND WITH BLUETOOTH, STEERING WHEEL MOUNTED AUDIO CONTROLS, TOWING PACKAGE / HITCH, TIRE PRESSURE MONITORING DISPLAY, ALL POWER AND MUCH MORE, CARFAX CERTIFIED, INCLUDES THE REMAINDER OF THE FACTORY WARRANTY, and EXTENDED WARRANTY AVAILABLE.
That things been sitting on the lot for a while now
Sent from my iPhone using Tapatalk
-
That doesn't seem like a deal to me. 46k can go a long way. It wouldn't have stock axles
-
Maybe if you start with a 2007 jku. Starting with a 2015 hard rock, that's a lot of upgrades for the 10-15k over base. That would barely cover one tons.
Good point if you want that stuff its a good buy. Those stock are really holding value
-
That doesn't seem like a deal to me. 46k can go a long way. It wouldn't have stock axles
The JKU alone is $42k. Also, how many can buy a new Jeep Sport and then dump $25k-$35k CASH at one time. IMO, this JKU is a great starting point for someone that can immediately go out and wheel the medium to hard stuff.
-
That doesn't seem like a deal to me. 46k can go a long way. It wouldn't have stock axles
The JKU alone is $42k. Also, how many can buy a new Jeep Sport and then dump $25k-$35k CASH at one time. IMO, this JKU is a great starting point for someone that can immediately go out and wheel the medium to hard stuff.
BTW, I'm not talking about going out and buying something you're going to trailer. DD/Wheeler. I'm in the neighborhood of $57k wrapped up in my rig and still need RCV, Reid Knuckles, Regear to 4.88, and 37's (wear item). But that will be another $5k which puts me at $62k and I still don't have tons. But that is money spent over the course of almost 4 years and not shelling it out all at once.
Has anyone gotten into this hobby/sport/obsession buying a trail rig, truck, trailer right out of the gate? It sure would save a lot of money but we all ease into it. :) //cheers2//
-
WTFHH
You should not keep a total, look at it, or share it.
-
That doesn't seem like a deal to me. 46k can go a long way. It wouldn't have stock axles
The JKU alone is $42k. Also, how many can buy a new Jeep Sport and then dump $25k-$35k CASH at one time. IMO, this JKU is a great starting point for someone that can immediately go out and wheel the medium to hard stuff.
Crazy people, that's who. Lol
-
That doesn't seem like a deal to me. 46k can go a long way. It wouldn't have stock axles
The JKU alone is $42k. Also, how many can buy a new Jeep Sport and then dump $25k-$35k CASH at one time. IMO, this JKU is a great starting point for someone that can immediately go out and wheel the medium to hard stuff.
BTW, I'm not talking about going out and buying something you're going to trailer. DD/Wheeler. I'm in the neighborhood of $57k wrapped up in my rig and still need RCV, Reid Knuckles, Regear to 4.88, and 37's (wear item). But that will be another $5k which puts me at $62k and I still don't have tons. But that is money spent over the course of almost 4 years and not shelling it out all at once.
Has anyone gotten into this hobby/sport/obsession buying a trail rig, truck, trailer right out of the gate? It sure would save a lot of money but we all ease into it. :) //cheers2//
Jeez, that's a lot of $ for a mall crawler.
-
That doesn't seem like a deal to me. 46k can go a long way. It wouldn't have stock axles
The JKU alone is $42k. Also, how many can buy a new Jeep Sport and then dump $25k-$35k CASH at one time. IMO, this JKU is a great starting point for someone that can immediately go out and wheel the medium to hard stuff.
BTW, I'm not talking about going out and buying something you're going to trailer. DD/Wheeler. I'm in the neighborhood of $57k wrapped up in my rig and still need RCV, Reid Knuckles, Regear to 4.88, and 37's (wear item). But that will be another $5k which puts me at $62k and I still don't have tons. But that is money spent over the course of almost 4 years and not shelling it out all at once.
Has anyone gotten into this hobby/sport/obsession buying a trail rig, truck, trailer right out of the gate? It sure would save a lot of money but we all ease into it. :) //cheers2//
Jeez, that's a lot of $ for a mall crawler.
At least it's not a Unibody //LMAO// //cheers2//
-
That hurt!
-
WTFHH
You should not keep a total, look at it, or share it.
Jay, @Raisinhead , explain this to Mike.
-
That hurt!
//cheers2// //cheers2// //cheers2//
-
WTFHH
You should not keep a total, look at it, or share it.
Jay, @Raisinhead , explain this to Mike.
//LMAO//
On a serious note though, it does help others know WTF they're in for //SLAMIN//
-
WTFHH
You should not keep a total, look at it, or share it.
Jay, @Raisinhead , explain this to Mike.
//LMAO//
On a serious note though, it does help others know WTF they're in for //SLAMIN//
This is a campfire discussion only. Also, Danny should also attend!
(https://uploads.tapatalk-cdn.com/20170309/b4f9e59fedea6dff6fae9e2fb71b2f91.jpg)
-
WTFHH
You should not keep a total, look at it, or share it.
Jay, @Raisinhead , explain this to Mike.
//LMAO//
On a serious note though, it does help others know WTF they're in for //SLAMIN//
This is a campfire discussion only. Also, Danny should also attend!
(https://uploads.tapatalk-cdn.com/20170309/b4f9e59fedea6dff6fae9e2fb71b2f91.jpg)
(https://uploads.tapatalk-cdn.com/20170309/e56b166eaeea93fd24a7c2ad813a3d12.jpg)
Sent from my iPhone using Tapatalk
-
Me: Hey Honey, my Metal Cloak armor came in. AllSouth is going to paint it and John is going to pick it up next week
Wife: That is awesome, it's going to look so good!
-
I told Laura I wasn't keeping a tally on the Jeep. She proceeded to tell me she was and gave me her estimate. She's dang near spot on. Give or take a skid plate or crossmember she doesn't know about. //::)//
-
I told Laura I wasn't keeping a tally on the Jeep. She proceeded to tell me she was and gave me her estimate. She's dang near spot on. Give or take a skid plate or crossmember she doesn't know about. //::)//
LOL - when I restored a '65 F250 (w/full float D60), I kept up with the expenses. When I was done, my wife told me that it was about $2k light.
(http://i1075.photobucket.com/albums/w429/BigMikes65/65frontendfinal001.jpg)
(http://i1075.photobucket.com/albums/w429/BigMikes65/65frontendfinal004.jpg)
(http://i1075.photobucket.com/albums/w429/BigMikes65/65frontendfinal007.jpg)
-
Nice Truck. Do you still have it?
-
Damn, I love that truck! My grandpa had a 66 ford (3 on the tree) that many of my uncles drove. I almost got to own it, but it didn't work out. It ended up getting totaled during Katrina. I would love to own one someday.
-
I don't want to know what I have spent. I just repurpose money so it has become not so bad. I had to find a way to get money for parts without spending my own, and so far it's working out well.
Sent from my SM-G935V using Tapatalk
-
Pretty cool dedicated rock crawler.
http://www.hardlinecrawlers.com/forums/index.php?topic=55342.0
-
Really like that but I'd have to figure out how to get some A/C in there. Looking at the engine bay, doesn't look like much room at all.
Agreed on the A/C.
Here is another nice one with A/C (just no LS). Otherwise, looks to be a solid setup.
http://www.hardlinecrawlers.com/forums/index.php?topic=54192.0
-
Pretty cool dedicated rock crawler.
http://www.hardlinecrawlers.com/forums/index.php?topic=55342.0
That is an incredible deal
-
Pretty cool dedicated rock crawler.
http://www.hardlinecrawlers.com/forums/index.php?topic=55342.0
That is an incredible deal
It has the stock engine, trans & t case. @kvom has a similarly build rig with a Atlas for a tad more.
-
Pretty cool dedicated rock crawler.
http://www.hardlinecrawlers.com/forums/index.php?topic=55342.0
That is an incredible deal
It has the stock engine, trans & t case. @kvom has a similarly build rig with a Atlas for a tad more.
Dave. Look closely. It has a 5.3. Good deal.
-
Pretty cool dedicated rock crawler.
http://www.hardlinecrawlers.com/forums/index.php?topic=55342.0
That is an incredible deal
It has the stock engine, trans & t case. @kvom has a similarly build rig with a Atlas for a tad more.
Im reading different
1997 Jeep Wrangler Rock Crawler with 5.3 LS swap and 700r4 automatic transmission. Dana 60 front and Sterling rear from 99-04 Superduty with 5:38 gears,
-
Pretty cool dedicated rock crawler.
http://www.hardlinecrawlers.com/forums/index.php?topic=55342.0
That is an incredible deal
It has the stock engine, trans & t case. @kvom has a similarly build rig with a Atlas for a tad more.
Dave. Look closely. It has a 5.3. Good deal.
John let's buy it!
-
Pretty cool dedicated rock crawler.
http://www.hardlinecrawlers.com/forums/index.php?topic=55342.0
That is an incredible deal
It has the stock engine, trans & t case. @kvom has a similarly build rig with a Atlas for a tad more.
Dave. Look closely. It has a 5.3. Good deal.
John let's buy it!
I would in a heartbeat if my wife wouldn't shoot me. I have nowhere else to park a rig.
-
Pretty cool dedicated rock crawler.
http://www.hardlinecrawlers.com/forums/index.php?topic=55342.0
That is an incredible deal
It has the stock engine, trans & t case. @kvom has a similarly build rig with a Atlas for a tad more.
Dave. Look closely. It has a 5.3. Good deal.
John let's buy it!
I would in a heartbeat if my wife wouldn't shoot me. I have nowhere else to park a rig.
Lol! That's why we were going to keep it at your house. If i bring it home right now i better be warm and comfy sleeping in it.
-
My bad, I was speaking of a different Hardline link.
-
Really like that but I'd have to figure out how to get some A/C in there. Looking at the engine bay, doesn't look like much room at all.
Agreed on the A/C.
Here is another nice one with A/C (just no LS). Otherwise, looks to be a solid setup.
http://www.hardlinecrawlers.com/forums/index.php?topic=54192.0
I meant to quote this one. It also has a rebuilt title.
The copper TJ is nice!!! Kinda reminds me of one a guy on here use to have.
-
Pretty cool dedicated rock crawler.
http://www.hardlinecrawlers.com/forums/index.php?topic=55342.0
That is an incredible deal
It has the stock engine, trans & t case. @kvom has a similarly build rig with a Atlas for a tad more.
Im reading different
1997 Jeep Wrangler Rock Crawler with 5.3 LS swap and 700r4 automatic transmission. Dana 60 front and Sterling rear from 99-04 Superduty with 5:38 gears,
It says it has the NP231. Behind the 5.3 that's guaranteed to break. So plan for another $2800 for an Atlas plus driveshaft work.
-
Pretty cool dedicated rock crawler.
http://www.hardlinecrawlers.com/forums/index.php?topic=55342.0
That is an incredible deal
It has the stock engine, trans & t case. @kvom has a similarly build rig with a Atlas for a tad more.
Im reading different
1997 Jeep Wrangler Rock Crawler with 5.3 LS swap and 700r4 automatic transmission. Dana 60 front and Sterling rear from 99-04 Superduty with 5:38 gears,
It says it has the NP231. Behind the 5.3 that's guaranteed to break. So plan for another $2800 for an Atlas plus driveshaft work.
Happily!
-
Really like that but I'd have to figure out how to get some A/C in there. Looking at the engine bay, doesn't look like much room at all.
Agreed on the A/C.
Here is another nice one with A/C (just no LS). Otherwise, looks to be a solid setup.
http://www.hardlinecrawlers.com/forums/index.php?topic=54192.0
I meant to quote this one. It also has a rebuilt title.
The copper TJ is nice!!! Kinda reminds me of one a guy on here use to have.
When on HL I look for pictures of it if I see something similar in color. Wish I could have kept it and have the chassis. Guy off HL bought in Alabama.
Sent from my SM-G935V using Tapatalk
-
Pretty cool dedicated rock crawler.
http://www.hardlinecrawlers.com/forums/index.php?topic=55342.0
So guys what else would you change on this rig other than the transfer case eventually?
Who wheels without air conditioning? I know all the buggies and most of us have no top or doorsf but like cold air in the face on a hot day.
-
Pretty cool dedicated rock crawler.
http://www.hardlinecrawlers.com/forums/index.php?topic=55342.0
So guys what else would you change on this rig other than the transfer case eventually?
Who wheels without air conditioning? I know all the buggies and most of us have no top or doorsf but like cold air in the face on a hot day.
I like my AC, but if I was starting with something like this rig, I could live without it. TC is the main weak link I see.
The tires wouldn't be my first choice, but I would wheel it as is until I broke the current TC and then put an Atlas in it.
I think that rig is a great deal. Even if you had to dump $5 or $6k more into it, you're way ahead of building from scratch.
-
Pretty cool dedicated rock crawler.
http://www.hardlinecrawlers.com/forums/index.php?topic=55342.0
So guys what else would you change on this rig other than the transfer case eventually?
Who wheels without air conditioning? I know all the buggies and most of us have no top or doorsf but like cold air in the face on a hot day.
I plan on wiring up one of those 12v fans like school bus drivers have this summer. I think just moving some air around will help tremendously
-
Top and doors that work are a nice thing that it has.
Are those the sticky tires or do they sell them both ways?
-
Would this rig pass requirements for EJS?
-
Pretty cool dedicated rock crawler.
http://www.hardlinecrawlers.com/forums/index.php?topic=55342.0
So guys what else would you change on this rig other than the transfer case eventually?
Who wheels without air conditioning? I know all the buggies and most of us have no top or doorsf but like cold air in the face on a hot day.
I don't turn the AC on when wheeling. My top is down and either doors off or half doors....AC doesn't do a damn thing.
If this was a perfect rig for you, other than the lack of AC, it can be added for less than $1000. When I was looking at that stretched Gold TJ from up north with the LQ9 motor I looked into adding AC.
-
Would this rig pass requirements for EJS?
EJS easily. Streets are a different story. I would want to be able to drive it on the road like jeff melissa gary do.
Trailer to trailhead or
Utah street driving you'll need a permit, title, ga tag, insurance.
The residents we ride with have them. Not sure how the out of state permits work. Jeff knows all about them. I'll ask him.
-
anybody know how the 700r4 transmission will hold up?
http://etereman.com/blog/general-motors-transmission/what-you-need-to-know-before-you-buy-a-gm-with-a-700r4-transmission
-
Pretty cool dedicated rock crawler.
http://www.hardlinecrawlers.com/forums/index.php?topic=55342.0
So guys what else would you change on this rig other than the transfer case eventually?
Who wheels without air conditioning? I know all the buggies and most of us have no top or doorsf but like cold air in the face on a hot day.
I plan on wiring up one of those 12v fans like school bus drivers have this summer. I think just moving some air around will help tremendously
I saw a buggy at CFR that had a double electric radiator fan mounted to the b pillar to move air around.
-
Top and doors that work are a nice thing that it has.
Are those the sticky tires or do they sell them both ways?
Don't know but like John I might run them a couple times since I have them and get something else. I'm just not an Interco fan unless you're running a bouncer and they seem to have the market there.
Sounds like you are ready to call and get us some more info and pics? :) I can't tell enough from the pics on HL and would definitely want more. My concern with rigs like this is seeing the quality of the welding/tube work from 5ft not 25ft.
-interior pics for condition
-like to see the cage
-are the axles still full width? They stick out a lot but since the body is narrowed I'd like to know about that - custom cut spare shafts or stock can change the price on shafts.
-I'm sure for you married guys you might have a problem keeping the trucker girl brackets on the tailgate
-I'd want to see more on the fender wells and maybe have Denny/Danny form up some tube work to provide rigidity to them. Poster says full armor and that might not be needed but can't tell the thickness of those fenders.
-Does the rear taillight function as a turn signal? If not, while not on the road much with this one, I'd want to add some small turn signals. Think running between trails on public roads in Moab.
-I'd have to add A/C back. I'd need more pics to see how much room we are/aren't working with for the compressor/etc. Going back to interior to see if the controls and vents are still there.
-John's LJ has MC seats and they were narrow for me, might be a me thing but I'd go in thinking I may need to swap seats. Given that thought I'd be looking at the cage work to see how doable that is
-Atlas and hence shafts as mentioned
-I'd make sure that is a D60 and not a D50 given the year range of the front axle.
-I'd want to know more on the engine - donor model/year, anything done to it, mileage before/after, who did the install, is the dash a christmas tree with some black electricians tape covering the check engine light or not, etc - some of this matters less with an older TJ of course.
-I'd plan on an arb install on both axles. Personal Preference.
-I'd want to see pics of the fuel cell and see how well that is done. With the wide open fender it might be awesome to try to put a fill cap there external to the body so you don't drip inside. Of course it could be a mud collector too.. so, devil would be in the details.
-Looks like surface rust on the front fender/hood and would want to check on that to ensure that is all it is.
I'm a stickler when buying things and some of this is easy to check off but thought I'd mention it. It's definitely an enticing rig if I didn't have to spend 7-10k having trees taken down.
Great stuff thanks
-
-John's LJ has MC seats and they were narrow for me, might be a me thing but I'd go in thinking I may need to swap seats. Given that thought I'd be looking at the cage work to see how doable that is
Good call, the Mastercraft seats in the LJ are the Sahara model and I also find them a bit too narrow and will be replacing them in the near future.
-
anybody know how the 700r4 transmission will hold up?
http://etereman.com/blog/general-motors-transmission/what-you-need-to-know-before-you-buy-a-gm-with-a-700r4-transmission
Mine in the Tahoe went 289,000 miles and you know it towed a lot including the jku to moab over the Rockies once.
-
I run a.c. when wheeling, especially when stuck on a trail while someone who should have pulled winch rope 10 minutes ago still tries to make an obstacle.
-
Pretty cool dedicated rock crawler.
http://www.hardlinecrawlers.com/forums/index.php?topic=55342.0
So guys what else would you change on this rig other than the transfer case eventually?
Who wheels without air conditioning? I know all the buggies and most of us have no top or doorsf but like cold air in the face on a hot day.
I don't turn the AC on when wheeling. My top is down and either doors off or half doors....AC doesn't do a damn thing.
If this was a perfect rig for you, other than the lack of AC, it can be added for less than $1000. When I was looking at that stretched Gold TJ from up north with the LQ9 motor I looked into adding AC.
I don't think there is a square inch of room under this rigs hood.
-
-Looks like surface rust on the front fender/hood and would want to check on that to ensure that is all it is.
Where do you see this? Maybe i need to get on a pc?
Edit.. under the hood?
-
(https://dl.dropboxusercontent.com/s/ajl7co2ieh2i0s8/DSC_8340.jpg?dl=0)
Could be nothing, could be dirt, it's a step up from Clark but far below a John level engine bay.
More so looking at they body/pinch areas but pointing out the obvious scuffs on the tubework too.
Wow...an unforced swipe...nicely done!
-
-John's LJ has MC seats and they were narrow for me, might be a me thing but I'd go in thinking I may need to swap seats. Given that thought I'd be looking at the cage work to see how doable that is
Good call, the Mastercraft seats in the LJ are the Sahara model and I also find them a bit too narrow and will be replacing them in the near future.
When changing seats a lot of the tabs (if hard mounted) are not the same so new tabs and making sure the harness are the set correctly will need to be looked at.
-
Man you're going all show car on me talking johns anything lol.
Johns would sell for a few thousand more than this. :-
-
700r4 tranny isn't an issue. My buggy had one with the Northstar V8.
-
Man you're going all show car on me talking johns anything lol.
Johns would sell for a few thousand more than this. :-
What's that Johnny fat fingers?
-
fixedum
-
Pretty cool dedicated rock crawler.
http://www.hardlinecrawlers.com/forums/index.php?topic=55342.0
So guys what else would you change on this rig other than the transfer case eventually?
Who wheels without air conditioning? I know all the buggies and most of us have no top or doorsf but like cold air in the face on a hot day.
I don't turn the AC on when wheeling. My top is down and either doors off or half doors....AC doesn't do a damn thing.
If this was a perfect rig for you, other than the lack of AC, it can be added for less than $1000. When I was looking at that stretched Gold TJ from up north with the LQ9 motor I looked into adding AC.
I don't think there is a square inch of room under this rigs hood.
Would be an easy question to ask the seller: "why isn't there AC?"
-
-John's LJ has MC seats and they were narrow for me, might be a me thing but I'd go in thinking I may need to swap seats. Given that thought I'd be looking at the cage work to see how doable that is
Good call, the Mastercraft seats in the LJ are the Sahara model and I also find them a bit too narrow and will be replacing them in the near future.
When you get ready PM me. I've also got a set of factory seats if you'd be interested in them as a partial trade.
Sent from my iPhone using Tapatalk
-
hoot?
I couldn't even decipher my own writing haha.
Sent from my iPhone using Tapatalk
-
Pats big brother?
http://www.hardlinecrawlers.com/forums/index.php?topic=55369.0;topicseen
I wouldn't mind having some of those parts for mine
-
https://atlanta.craigslist.org/atl/ctd/6033496113.html
-
^^^^^ 4x4 but no transfer case? //WTF// ^^^^^
-
https://lakeland.craigslist.org/cto/6043304427.html either they don't know what jeep they have, or theres something wrong with the jeep that they're not telling
-
https://lakeland.craigslist.org/cto/6043304427.html either they don't know what jeep they have, or theres something wrong with the jeep that they're not telling
I bet typo or scam
-
Scam
Sent from my iPhone using Tapatalk
-
Scam
Sent from my iPhone using Tapatalk
I called and gave my credit card to hold it. I pick it up this weekend.
-
Scam
Sent from my iPhone using Tapatalk
I called and gave my credit card to hold it. I pick it up this weekend.
Smart. You should ask if he will deliver for another $1k deposit.
-
Scam
Sent from my iPhone using Tapatalk
I called and gave my credit card to hold it. I pick it up this weekend.
Smart. You should ask if he will deliver for another $1k deposit.
Good thinking...I'm on it
-
https://atlanta.craigslist.org/atl/tro/6006000108.html
@Raisinhead ???
-
https://atlanta.craigslist.org/atl/tro/6006000108.html
@Raisinhead ???
killer price for someone
-
https://atlanta.craigslist.org/atl/cto/6041578767.html
-
Damn, that's a good deal
-
https://atlanta.craigslist.org/atl/cto/6041578767.html
gotta be another scam
-
your not gonna find too many 10 year old trucks with only 70k miles on them, and $2500. really?
-
It's a scam. when you call there is a message machine that asks you some sort of question requiring you to say "yes". Then they try to get enough information to scam you. #1. If it sounds too good to be true it probably is....
-
your not gonna find too many 10 year old trucks with only 70k miles on them, and $2500. really?
Yeah, and this truck is TWENTY years old. He also says text or call, yet no number. Scam.
-
It's already been flagged now.
-
I called the number for the jeep and the truck and it rang and just went to a voicemail. However, I texted the jeep owner for more pictures and and received a text back asking for an email and confirming the price at 3100. I gave an email address and haven't received anything
-
your not gonna find too many 10 year old trucks with only 70k miles on them, and $2500. really?
Yeah, and this truck is TWENTY years old. He also says text or call, yet no number. Scam.
yep thought yall would enjoy that beauty.
Are you clicking on the reply button that shows the contact info?
-
yes^
-
Same story from two different vehicles. Watch out for this new scam.
-
https://atlanta.craigslist.org/nat/pts/6048394441.html
I could pick up for someone tomorrow
-
Drive train set up, I am looking at this but need to know if it's s deal also About how much it would run to have Allsouth do the install?
I'm thinking a fair price is around $5000, since they are already regeared to 4.88 and come with sleeves, C gussets, Metal Cloak diff covers and lower control arm skids installed. That's over $2000 worth the extras plus the factory lockers. If you added all that to a set of stock axles, it'd cost over $4000 in parts and labor. They are in excellent shape with less than 2k miles on gears. Also included is the complete brake system with calipers and rotors.
https://asheville.craigslist.org/pts/6004348658.html
Sent from my iPhone using Tapatalk
-
Drive train set up, I am looking at this but need to know if it's s deal also About how much it would run to have Allsouth do the install?
I'm thinking a fair price is around $5000, since they are already regeared to 4.88 and come with sleeves, C gussets, Metal Cloak diff covers and lower control arm skids installed. That's over $2000 worth the extras plus the factory lockers. If you added all that to a set of stock axles, it'd cost over $4000 in parts and labor. They are in excellent shape with less than 2k miles on gears. Also included is the complete brake system with calipers and rotors.
https://asheville.craigslist.org/pts/6004348658.html
Sent from my iPhone using Tapatalk
I would say $4K...$4500 at the most
-
Drive train set up, I am looking at this but need to know if it's s deal also About how much it would run to have Allsouth do the install?
I'm thinking a fair price is around $5000, since they are already regeared to 4.88 and come with sleeves, C gussets, Metal Cloak diff covers and lower control arm skids installed. That's over $2000 worth the extras plus the factory lockers. If you added all that to a set of stock axles, it'd cost over $4000 in parts and labor. They are in excellent shape with less than 2k miles on gears. Also included is the complete brake system with calipers and rotors.
https://asheville.craigslist.org/pts/6004348658.html
Sent from my iPhone using Tapatalk
look closely. I'm not sure the front is a 44. It looks like a 30 to me...
-
Drive train set up, I am looking at this but need to know if it's s deal also About how much it would run to have Allsouth do the install?
I'm thinking a fair price is around $5000, since they are already regeared to 4.88 and come with sleeves, C gussets, Metal Cloak diff covers and lower control arm skids installed. That's over $2000 worth the extras plus the factory lockers. If you added all that to a set of stock axles, it'd cost over $4000 in parts and labor. They are in excellent shape with less than 2k miles on gears. Also included is the complete brake system with calipers and rotors.
https://asheville.craigslist.org/pts/6004348658.html
Sent from my iPhone using Tapatalk
I would say $4K...$4500 at the most
This...since you will have no clue if the gears were setup correctly...give yourself some room for a regear if they effed it up.
-
That might be the reason for the early replacement.
Sent from my iPhone using Tapatalk
-
Anyone in the club interested in this please let everyone know about it. I just got some news from my wife that is taking me out of this deal. Looks like we might be one income family for awhile
Sent from my iPhone using Tapatalk
-
Anyone in the club interested in this please let everyone know about it. I just got some news from my wife that is taking me out of this deal. Looks like we might be one income family for awhile
Sent from my iPhone using Tapatalk
thatll take the wind out of your sails for sure.
-
Yup gotta tighten up.
DAMMIT I thought I had a plan to get it all done in one swoop, oh well. Green and bye trails for me for a bit longer.
Sent from my iPhone using Tapatalk
-
What's it like to be a 2 income family?
-
What's it like to be a 2 income family?
Broke.
-
What's it like to be a 2 income family?
You both come home after work and the house is dirty. Dinner isn't ready, and no one got groceries. And no one wants to cook, so a lot of takeout. If there are weekend plans (like a wheeling trip) everything you were supposed to do on the weekend gets pushed to the week after work, so more takeout food.
-
^^,lol, that's about right Pat, but now I'm retired and she still works, so I take care of the cooking, cleaning and shopping. the jury is still out on retirement tho, but winter is over so I see a lot of fishing and wheeling in my future.
-
What's it like to be a 2 income family?
You both come home after work and the house is dirty. Dinner isn't ready, and no one got groceries. And no one wants to cook, so a lot of takeout. If there are weekend plans (like a wheeling trip) everything you were supposed to do on the weekend gets pushed to the week after work, so more takeout food.
Wow and I thought we were the only ones out there that fit that description. I gotta stop believing all that Facebook crap I guess.
Sent from my iPhone using Tapatalk
-
What's it like to be a 2 income family?
You both come home after work and the house is dirty. Dinner isn't ready, and no one got groceries. And no one wants to cook, so a lot of takeout. If there are weekend plans (like a wheeling trip) everything you were supposed to do on the weekend gets pushed to the week after work, so more takeout food.
Wow and I thought we were the only ones out there that fit that description. I gotta stop believing all that Facebook crap I guess.
Sent from my iPhone using Tapatalk
I thought I had a great life until I went on facebook and saw how much better everyone else i know has it...so I basically abandoned Facebook. If I want to feel bad about my life, I'll do it the old fashioned way...get drunk, a lot!
-
What's it like to be a 2 income family?
You both come home after work and the house is dirty. Dinner isn't ready, and no one got groceries. And no one wants to cook, so a lot of takeout. If there are weekend plans (like a wheeling trip) everything you were supposed to do on the weekend gets pushed to the week after work, so more takeout food.
Wow and I thought we were the only ones out there that fit that description. I gotta stop believing all that Facebook crap I guess.
Sent from my iPhone using Tapatalk
I thought I had a great life until I went on facebook and saw how much better everyone else i know has it...so I basically abandoned Facebook. If I want to feel bad about my life, I'll do it the old fashioned way...get drunk, a lot!
People lie all the time on fb. And a lot of narcissists.
We fixed the dirty house part by hiring a cleaner. I can't find a chef within my budget...
-
What's it like to be a 2 income family?
You both come home after work and the house is dirty. Dinner isn't ready, and no one got groceries. And no one wants to cook, so a lot of takeout. If there are weekend plans (like a wheeling trip) everything you were supposed to do on the weekend gets pushed to the week after work, so more takeout food.
Wow and I thought we were the only ones out there that fit that description. I gotta stop believing all that Facebook crap I guess.
Sent from my iPhone using Tapatalk
(https://pics.onsizzle.com/welcome-to-facebook-the-place-where-relationships-are-perfect-liars-6429953.png)
-
So now that I'm about to be more broke, can I get discount on a CORE membership.
Sent from my iPhone using Tapatalk
-
So now that I'm about to be more broke, can I get discount on a CORE membership.
Sent from my iPhone using Tapatalk
Pay for core, sit by a fire, learn about mmsp. Money then appears.
-
What's it like to be a 2 income family?
You both come home after work and the house is dirty. Dinner isn't ready, and no one got groceries. And no one wants to cook, so a lot of takeout. If there are weekend plans (like a wheeling trip) everything you were supposed to do on the weekend gets pushed to the week after work, so more takeout food.
Sounds the same
-
What's it like to be a 2 income family?
You both come home after work and the house is dirty. Dinner isn't ready, and no one got groceries. And no one wants to cook, so a lot of takeout. If there are weekend plans (like a wheeling trip) everything you were supposed to do on the weekend gets pushed to the week after work, so more takeout food.
Sounds the same
Hahahaha , I was going to say the same!!
-
What's it like to be a 2 income family?
You both come home after work and the house is dirty. Dinner isn't ready, and no one got groceries. And no one wants to cook, so a lot of takeout. If there are weekend plans (like a wheeling trip) everything you were supposed to do on the weekend gets pushed to the week after work, so more takeout food.
Sounds the same
Hahahaha , I was going to say the same!!
This. Except i get a what do you want for dinner? Oh i don't care what about you? I don't care either. 15 minutes later its the same coversation.
-
So now that I'm about to be more broke, can I get discount on a CORE membership.
Sent from my iPhone using Tapatalk
Pay for core, sit by a fire, learn about mmsp. Money then appears.
Mmsp?
Sent from my iPhone using Tapatalk
-
What's it like to be a 2 income family?
You both come home after work and the house is dirty. Dinner isn't ready, and no one got groceries. And no one wants to cook, so a lot of takeout. If there are weekend plans (like a wheeling trip) everything you were supposed to do on the weekend gets pushed to the week after work, so more takeout food.
Sounds the same
Hahahaha , I was going to say the same!!
This. Except i get a what do you want for dinner? Oh i don't care what about you? I don't care either. 15 minutes later its the same coversation.
(https://uploads.tapatalk-cdn.com/20170321/5718fa2bb3d8abe3713890a78af01807.jpg)
Sent from my SM-G900V using Tapatalk
-
What's it like to be a 2 income family?
It's a beautiful thing until tax time #$%@#$%%$%#$
-
So now that I'm about to be more broke, can I get discount on a CORE membership.
Sent from my iPhone using Tapatalk
Pay for core, sit by a fire, learn about mmsp. Money then appears.
Mmsp?
Sent from my iPhone using Tapatalk
Married Man Savings Plan
no more discussion on the interwebs...the tradition is passed on verbally :)
-
So now that I'm about to be more broke, can I get discount on a CORE membership.
Sent from my iPhone using Tapatalk
Pay for core, sit by a fire, learn about mmsp. Money then appears.
Mmsp?
Sent from my iPhone using Tapatalk
Married Man Savings Plan
no more discussion on the interwebs...the tradition is passed on verbally :)
Lol
Sent from my iPhone using Tapatalk
-
So now that I'm about to be more broke, can I get discount on a CORE membership.
Sent from my iPhone using Tapatalk
Pay for core, sit by a fire, learn about mmsp. Money then appears.
Mmsp?
Sent from my iPhone using Tapatalk
Married Man Savings Plan
no more discussion on the interwebs...the tradition is passed on verbally :)
Exactly
-
Well I'd better get my application in for CORE I need to learn the
"MMSP Way"
May the force be with us
Sent from my iPhone using Tapatalk
-
Any thoughts about this rig: http://www.hardlinecrawlers.com/forums/index.php?action=post;quote=649910;topic=55479.0;num_replies=3;sesc=89adc579ca81ef3fd6dafd2fc7a3550f
-
Any thoughts about this rig: http://www.hardlinecrawlers.com/forums/index.php?action=post;quote=649910;topic=55479.0;num_replies=3;sesc=89adc579ca81ef3fd6dafd2fc7a3550f
Bad URL Clark. Shows an error.
-
Just send the title of the thread in hardline
-
Just send the title of the thread in hardline
Juggy-5.3 LS motor-Coilovers-44's-$12,900
http://www.hardlinecrawlers.com/forums/index.php?topic=55479.0
-
Just send the title of the thread in hardline
Juggy-5.3 LS motor-Coilovers-44's-$12,900
http://www.hardlinecrawlers.com/forums/index.php?topic=55479.0
Looks pretty cool and well priced. Ready for a good night ride as well
-
Old and redo stuff
-
Old and redo stuff
What needs to be redone on it?
-
Any thoughts about this rig: http://www.hardlinecrawlers.com/forums/index.php?action=post;quote=649910;topic=55479.0;num_replies=3;sesc=89adc579ca81ef3fd6dafd2fc7a3550f
I think it looks good, but think you should buy trailabite.
-
Old and redo stuff
Compared to the original sale, it's rough: https://r.tapatalk.com/shareLink?url=http%3A%2F%2Fwww%2Ehardlinecrawlers%2Ecom%2Fforums%2Findex%2Ephp%3Ftopic%3D34500%2E0&share_tid=34500&share_fid=32116&share_type=t
Backhalfed CJ Buggy 5.3, Built Tons, 44's
-
Hail! Seeing some incredible video from there, I'm in China. Wife and kids in the basement. What the heck. How bad is it?
-
Hail! Seeing some incredible video from there, I'm in China. Wife and kids in the basement. What the heck. How bad is it?
It was intense at my place about 30 minutes ago. Trash can blown over. Topiary blown over. Stuff hitting the roof...and I have no major trees above my house. Rain hitting the front door, and that never happens!
-
Hail! Seeing some incredible video from there, I'm in China. Wife and kids in the basement. What the heck. How bad is it?
The hardest part is finding the right threads to post in :)
-
Hail! Seeing some incredible video from there, I'm in China. Wife and kids in the basement. What the heck. How bad is it?
The hardest part is finding the right threads to post in :)
Nicely done, Jay.
-
Old and redo stuff
Compared to the original sale, it's rough: https://r.tapatalk.com/shareLink?url=http%3A%2F%2Fwww%2Ehardlinecrawlers%2Ecom%2Fforums%2Findex%2Ephp%3Ftopic%3D34500%2E0&share_tid=34500&share_fid=32116&share_type=t
Backhalfed CJ Buggy 5.3, Built Tons, 44's
Man rigs sure get passed around like rental cars. Anyway, I am sure I could find a lot of issues but the first thing I saw was: Chevy 60 front with those high steer arms means cracked knockles are in your future. The single shear tie rod attachment to the high steer arm is not good. The steering cyclinder is only mounted with two clamps when there is clearly room for all four. I only looked at the pics quickly but it looks like short cuts were taken, bet there are others hidden as well. That's what I would expect anyway on the hardline rigs that seem to get bought and sold every few years.
-
Hail! Seeing some incredible video from there, I'm in China. Wife and kids in the basement. What the heck. How bad is it?
The hardest part is finding the right threads to post in :)
Wong fooking tread
Extreme sleep deprivation
-
Old and redo stuff
Compared to the original sale, it's rough: https://r.tapatalk.com/shareLink?url=http%3A%2F%2Fwww%2Ehardlinecrawlers%2Ecom%2Fforums%2Findex%2Ephp%3Ftopic%3D34500%2E0&share_tid=34500&share_fid=32116&share_type=t
Backhalfed CJ Buggy 5.3, Built Tons, 44's
Man rigs sure get passed around like rental cars. Anyway, I am sure I could find a lot of issues but the first thing I saw was: Chevy 60 front with those high steer arms means cracked knockles are in your future. The single shear tie rod attachment to the high steer arm is not good. The steering cyclinder is only mounted with two clamps when there is clearly room for all four. I only looked at the pics quickly but it looks like short cuts were taken, bet there are others hidden as well. That's what I would expect anyway on the hardline rigs that seem to get bought and sold every few years.
Thanks for the analysis. I am not going near this thing.
-
Old and redo stuff
Compared to the original sale, it's rough: https://r.tapatalk.com/shareLink?url=http%3A%2F%2Fwww%2Ehardlinecrawlers%2Ecom%2Fforums%2Findex%2Ephp%3Ftopic%3D34500%2E0&share_tid=34500&share_fid=32116&share_type=t
Backhalfed CJ Buggy 5.3, Built Tons, 44's
Man rigs sure get passed around like rental cars. Anyway, I am sure I could find a lot of issues but the first thing I saw was: Chevy 60 front with those high steer arms means cracked knockles are in your future. The single shear tie rod attachment to the high steer arm is not good. The steering cyclinder is only mounted with two clamps when there is clearly room for all four. I only looked at the pics quickly but it looks like short cuts were taken, bet there are others hidden as well. That's what I would expect anyway on the hardline rigs that seem to get bought and sold every few years.
That's invaluable analysis right there. Nice!
Sent from my SM-G935V using Tapatalk
-
Old and redo stuff
Compared to the original sale, it's rough: https://r.tapatalk.com/shareLink?url=http%3A%2F%2Fwww%2Ehardlinecrawlers%2Ecom%2Fforums%2Findex%2Ephp%3Ftopic%3D34500%2E0&share_tid=34500&share_fid=32116&share_type=t
Backhalfed CJ Buggy 5.3, Built Tons, 44's
Man rigs sure get passed around like rental cars. Anyway, I am sure I could find a lot of issues but the first thing I saw was: Chevy 60 front with those high steer arms means cracked knockles are in your future. The single shear tie rod attachment to the high steer arm is not good. The steering cyclinder is only mounted with two clamps when there is clearly room for all four. I only looked at the pics quickly but it looks like short cuts were taken, bet there are others hidden as well. That's what I would expect anyway on the hardline rigs that seem to get bought and sold every few years.
That's invaluable analysis right there. Nice!
Sent from my SM-G935V using Tapatalk
No kidding. Scott is coming with me on my next used vehicle purchase
-
Old and redo stuff
Compared to the original sale, it's rough: https://r.tapatalk.com/shareLink?url=http%3A%2F%2Fwww%2Ehardlinecrawlers%2Ecom%2Fforums%2Findex%2Ephp%3Ftopic%3D34500%2E0&share_tid=34500&share_fid=32116&share_type=t
Backhalfed CJ Buggy 5.3, Built Tons, 44's
Man rigs sure get passed around like rental cars. Anyway, I am sure I could find a lot of issues but the first thing I saw was: Chevy 60 front with those high steer arms means cracked knockles are in your future. The single shear tie rod attachment to the high steer arm is not good. The steering cyclinder is only mounted with two clamps when there is clearly room for all four. I only looked at the pics quickly but it looks like short cuts were taken, bet there are others hidden as well. That's what I would expect anyway on the hardline rigs that seem to get bought and sold every few years.
That's invaluable analysis right there. Nice!
Sent from my SM-G935V using Tapatalk
No kidding. Scott is coming with me on my next used vehicle purchase
Borrow his trailer while you're up there.
-
Old and redo stuff
Compared to the original sale, it's rough: https://r.tapatalk.com/shareLink?url=http%3A%2F%2Fwww%2Ehardlinecrawlers%2Ecom%2Fforums%2Findex%2Ephp%3Ftopic%3D34500%2E0&share_tid=34500&share_fid=32116&share_type=t
Backhalfed CJ Buggy 5.3, Built Tons, 44's
Man rigs sure get passed around like rental cars. Anyway, I am sure I could find a lot of issues but the first thing I saw was: Chevy 60 front with those high steer arms means cracked knockles are in your future. The single shear tie rod attachment to the high steer arm is not good. The steering cyclinder is only mounted with two clamps when there is clearly room for all four. I only looked at the pics quickly but it looks like short cuts were taken, bet there are others hidden as well. That's what I would expect anyway on the hardline rigs that seem to get bought and sold every few years.
That's invaluable analysis right there. Nice!
Sent from my SM-G935V using Tapatalk
No kidding. Scott is coming with me on my next used vehicle purchase
Borrow his trailer while you're up there.
(https://uploads.tapatalk-cdn.com/20170322/e036e2427c52e3fc33d9b1084a5f8ad9.jpg)
-
Cool rig...
http://www.hardlinecrawlers.com/forums/index.php?topic=55494.0
-
Old and redo stuff
Compared to the original sale, it's rough: https://r.tapatalk.com/shareLink?url=http%3A%2F%2Fwww%2Ehardlinecrawlers%2Ecom%2Fforums%2Findex%2Ephp%3Ftopic%3D34500%2E0&share_tid=34500&share_fid=32116&share_type=t
Backhalfed CJ Buggy 5.3, Built Tons, 44's
Man rigs sure get passed around like rental cars. Anyway, I am sure I could find a lot of issues but the first thing I saw was: Chevy 60 front with those high steer arms means cracked knockles are in your future. The single shear tie rod attachment to the high steer arm is not good. The steering cyclinder is only mounted with two clamps when there is clearly room for all four. I only looked at the pics quickly but it looks like short cuts were taken, bet there are others hidden as well. That's what I would expect anyway on the hardline rigs that seem to get bought and sold every few years.
That's invaluable analysis right there. Nice!
Sent from my SM-G935V using Tapatalk
No kidding. Scott is coming with me on my next used vehicle purchase
Borrow his trailer while you're up there.
Why are trying to get another Jeep similar to yours other than the engine? Why not change the engine and whatever else? Can't wheel them both at the same time.
Sent from my SM-G935V using Tapatalk
-
Old and redo stuff
Compared to the original sale, it's rough: https://r.tapatalk.com/shareLink?url=http%3A%2F%2Fwww%2Ehardlinecrawlers%2Ecom%2Fforums%2Findex%2Ephp%3Ftopic%3D34500%2E0&share_tid=34500&share_fid=32116&share_type=t
Backhalfed CJ Buggy 5.3, Built Tons, 44's
Man rigs sure get passed around like rental cars. Anyway, I am sure I could find a lot of issues but the first thing I saw was: Chevy 60 front with those high steer arms means cracked knockles are in your future. The single shear tie rod attachment to the high steer arm is not good. The steering cyclinder is only mounted with two clamps when there is clearly room for all four. I only looked at the pics quickly but it looks like short cuts were taken, bet there are others hidden as well. That's what I would expect anyway on the hardline rigs that seem to get bought and sold every few years.
That's invaluable analysis right there. Nice!
Sent from my SM-G935V using Tapatalk
No kidding. Scott is coming with me on my next used vehicle purchase
I'm in, although you probably won't end up buying anything after I tell you what I see. My wife says I am always looking at the negative side of things.
-
Old and redo stuff
Compared to the original sale, it's rough: https://r.tapatalk.com/shareLink?url=http%3A%2F%2Fwww%2Ehardlinecrawlers%2Ecom%2Fforums%2Findex%2Ephp%3Ftopic%3D34500%2E0&share_tid=34500&share_fid=32116&share_type=t
Backhalfed CJ Buggy 5.3, Built Tons, 44's
Man rigs sure get passed around like rental cars. Anyway, I am sure I could find a lot of issues but the first thing I saw was: Chevy 60 front with those high steer arms means cracked knockles are in your future. The single shear tie rod attachment to the high steer arm is not good. The steering cyclinder is only mounted with two clamps when there is clearly room for all four. I only looked at the pics quickly but it looks like short cuts were taken, bet there are others hidden as well. That's what I would expect anyway on the hardline rigs that seem to get bought and sold every few years.
That's invaluable analysis right there. Nice!
Sent from my SM-G935V using Tapatalk
No kidding. Scott is coming with me on my next used vehicle purchase
I'm in, although you probably won't end up buying anything after I tell you what I see. My wife says I am always looking at the negative side of things.
Does she tell you that in a negative way?
-
That's when you tell her you did that with girls too. She passed the test. Then you ask to buy something big shortly after.
-
Need a Scott review on every rig posted
-
That's when you tell her you did that with girls too. She passed the test. Then you ask to buy something big shortly after.
Definitely don't tell her that you found a few things wrong with her but that you figured they could be fixed on the cheap.
Sent from my SM-G935V using Tapatalk
-
Need a Scott review on every rig posted
@Scott F. Never give your opinion when i list mine for sale
-
Cheap bouncer just got posted on my offroad FB page about an hour ago.
https://www.facebook.com/groups/208454209324301/permalink/712843855551998/?sale_post_id=712843855551998&comment_id=712880035548380
-
Need a Scott review on every rig posted
@Scott F. Never give your opinion when i list mine for sale
No worries, I could name at least 10 things on mine that need fixing just off the top of my head. Time and money...don't have enough for them to be a priority.
-
A friends friend is selling this crazy rig
dont have time to ride, so, after 3 years of building and only riding 2 times since finished almost a year ago, gonna sell it. Know anyone who wants an awesome Supercharged, 4 linked buggy on 38 cut Boggers with beadlocks ? Asking $28,500, lots of good stuff on it and 3 years work
(https://uploads.tapatalk-cdn.com/20170324/6c88c944f3957dce9cafa52d5eb8dee7.jpg)
(https://uploads.tapatalk-cdn.com/20170324/8f6085e9fe33cc743df4aa30046dce91.jpg)
(https://uploads.tapatalk-cdn.com/20170324/cd8f34f0548bdd6f87e09eb72f2de33f.jpg)
(https://uploads.tapatalk-cdn.com/20170324/a838a62d811e5bfa05a5e5786dc75770.jpg)
(https://uploads.tapatalk-cdn.com/20170324/595f8d5b7aa9c92c352280773e690e7f.jpg)
-
A friends friend is seeking this crazy rig
dont have time to ride, so, after 3 years of building and only riding 2 times since finished almost a year ago, gonna sell it. Know anyone who wants an awesome Supercharged, 4 linked buggy on 38 cut Boggers with beadlocks ? Asking $28,500, lots of good stuff on it and 3 years work
(https://uploads.tapatalk-cdn.com/20170324/6c88c944f3957dce9cafa52d5eb8dee7.jpg)
(https://uploads.tapatalk-cdn.com/20170324/8f6085e9fe33cc743df4aa30046dce91.jpg)
(https://uploads.tapatalk-cdn.com/20170324/cd8f34f0548bdd6f87e09eb72f2de33f.jpg)
(https://uploads.tapatalk-cdn.com/20170324/a838a62d811e5bfa05a5e5786dc75770.jpg)
(https://uploads.tapatalk-cdn.com/20170324/595f8d5b7aa9c92c352280773e690e7f.jpg)
boggers are cool but a supercharged 6cyl for $28k?? on a truck frame? //no//
-
A friends friend is seeking this crazy rig
dont have time to ride, so, after 3 years of building and only riding 2 times since finished almost a year ago, gonna sell it. Know anyone who wants an awesome Supercharged, 4 linked buggy on 38 cut Boggers with beadlocks ? Asking $28,500, lots of good stuff on it and 3 years work
(https://uploads.tapatalk-cdn.com/20170324/6c88c944f3957dce9cafa52d5eb8dee7.jpg)
(https://uploads.tapatalk-cdn.com/20170324/8f6085e9fe33cc743df4aa30046dce91.jpg)
(https://uploads.tapatalk-cdn.com/20170324/cd8f34f0548bdd6f87e09eb72f2de33f.jpg)
(https://uploads.tapatalk-cdn.com/20170324/a838a62d811e5bfa05a5e5786dc75770.jpg)
(https://uploads.tapatalk-cdn.com/20170324/595f8d5b7aa9c92c352280773e690e7f.jpg)
boggers are cool but a supercharged 6cyl for $28k?? on a truck frame? //no//
Pretty much the feedback i provided.
-
a supercharged 6cyl for $28k?? on a truck frame? //no//
Agreed. I was looking at that exhaust thinking... wtf am I missing.
Also... inverted yellow painted ammo cans? //hehe//
A few cylinders ha
-
a supercharged 6cyl for $28k?? on a truck frame? //no//
Agreed. I was looking at that exhaust thinking... wtf am I missing.
Also... inverted yellow painted ammo cans? //hehe//
i thought the cans added value at that point //LMAO//
-
a supercharged 6cyl for $28k?? on a truck frame? //no//
Agreed. I was looking at that exhaust thinking... wtf am I missing.
Also... inverted yellow painted ammo cans? //hehe//
Whoa...there is a certain member on here (eh hem, Scott) that did that same thing on his rig...don't be offensive...unless you're talking about the yellow, and that takes us down another set of offensiveness for John and Ben
-
a supercharged 6cyl for $28k?? on a truck frame? //no//
Agreed. I was looking at that exhaust thinking... wtf am I missing.
Also... inverted yellow painted ammo cans? //hehe//
Whoa...there is a certain member on here (eh hem, Scott) that did that same thing on his rig...don't be offensive...unless you're talking about the yellow, and that takes us down another set of offensiveness for John and Ben
i got cans in my rig man, you know im neutral. @clark123456 we basically have the same views you know this
-
Offended is not an acceptable GATR condition.
-
a supercharged 6cyl for $28k?? on a truck frame? //no//
Agreed. I was looking at that exhaust thinking... wtf am I missing.
Also... inverted yellow painted ammo cans? //hehe//
Whoa...there is a certain member on here (eh hem, Scott) that did that same thing on his rig...don't be offensive...unless you're talking about the yellow, and that takes us down another set of offensiveness for John and Ben
i got cans in my rig man, you know im neutral. @clark123456 we basically have the same views you know this
Ok...yep, yellow is for losers...got it!
-
I want!
This is the white jumping rig that proved to me how tough RockJock 70s are going straight up on Rocker Knocker and i mean vertical with all 4 way up in the air. Photo below.
Chuckie this was perfect for you @trailabite
No price yet
Anyone looking to buy a 4dr JKU ?
2014
Bruiser LS3 430
Nag1 5spd auto
Rock Jock 70s
5.38s
Detroit front
ARB rear
Warn Hubs
JE Reel 1350 Drivelines
Raceline Monsters
BFG 40s Krawlers
Savvy LHT Bumpers
Savvy Rockrails
Savvy 4" suspension
Savvy 3link front
All 7 links 7075 aluminum
Radflow Double Bypass shocks
Radflow air bumps front n rear
Warn Zeon winch
Factor 55
Warn onboard air
Currie antirocks aluminum, front n rear
PSC Hydro assist Steering
Spod
Magnaflow Stainless exhaust
This Jeep is in amazing condition, looks n drives like new.
Serious buyers only, but it's priced at a very smokin deal I mean smokin deal..
(https://uploads.tapatalk-cdn.com/20170324/ac99d435cb6cde91f2a92013ec462a05.jpg)
-
I want!
This is the white jumping rig that proved to me how tough RockJock 70s are going straight up on Rocker Knocker and i mean vertical with all 4 way up in the air. Photo below.
Chuckie this was perfect for you @trailabite
No price yet
Anyone looking to buy a 4dr JKU ?
2014
Bruiser LS3 430
Nag1 5spd auto
Rock Jock 70s
5.38s
Detroit front
ARB rear
Warn Hubs
JE Reel 1350 Drivelines
Raceline Monsters
BFG 40s Krawlers
Savvy LHT Bumpers
Savvy Rockrails
Savvy 4" suspension
Savvy 3link front
All 7 links 7075 aluminum
Radflow Double Bypass shocks
Radflow air bumps front n rear
Warn Zeon winch
Factor 55
Warn onboard air
Currie antirocks aluminum, front n rear
PSC Hydro assist Steering
Spod
Magnaflow Stainless exhaust
This Jeep is in amazing condition, looks n drives like new.
Serious buyers only, but it's priced at a very smokin deal I mean smokin deal..
(https://uploads.tapatalk-cdn.com/20170324/ac99d435cb6cde91f2a92013ec462a05.jpg)
Gotta have a price!
-
I want!
This is the white jumping rig that proved to me how tough RockJock 70s are going straight up on Rocker Knocker and i mean vertical with all 4 way up in the air. Photo below.
Chuckie this was perfect for you @Trailabite
No price yet
Anyone looking to buy a 4dr JKU ?
2014
Bruiser LS3 430
Nag1 5spd auto
Rock Jock 70s
5.38s
Detroit front
ARB rear
Warn Hubs
JE Reel 1350 Drivelines
Raceline Monsters
BFG 40s Krawlers
Savvy LHT Bumpers
Savvy Rockrails
Savvy 4" suspension
Savvy 3link front
All 7 links 7075 aluminum
Radflow Double Bypass shocks
Radflow air bumps front n rear
Warn Zeon winch
Factor 55
Warn onboard air
Currie antirocks aluminum, front n rear
PSC Hydro assist Steering
Spod
Magnaflow Stainless exhaust
This Jeep is in amazing condition, looks n drives like new.
Serious buyers only, but it's priced at a very smokin deal I mean smokin deal..
(https://uploads.tapatalk-cdn.com/20170324/ac99d435cb6cde91f2a92013ec462a05.jpg)
Gotta have a price!
Not a fan of the stock trans behind a v8 bruiser setup.
Knowing Savvy, it'll be delivered in 2019.
And in separate deliveries.
-
I want!
This is the white jumping rig that proved to me how tough RockJock 70s are going straight up on Rocker Knocker and i mean vertical with all 4 way up in the air. Photo below.
Chuckie this was perfect for you @trailabite
No price yet
Anyone looking to buy a 4dr JKU ?
2014
Bruiser LS3 430
Nag1 5spd auto
Rock Jock 70s
5.38s
Detroit front
ARB rear
Warn Hubs
JE Reel 1350 Drivelines
Raceline Monsters
BFG 40s Krawlers
Savvy LHT Bumpers
Savvy Rockrails
Savvy 4" suspension
Savvy 3link front
All 7 links 7075 aluminum
Radflow Double Bypass shocks
Radflow air bumps front n rear
Warn Zeon winch
Factor 55
Warn onboard air
Currie antirocks aluminum, front n rear
PSC Hydro assist Steering
Spod
Magnaflow Stainless exhaust
This Jeep is in amazing condition, looks n drives like new.
Serious buyers only, but it's priced at a very smokin deal I mean smokin deal..
(https://uploads.tapatalk-cdn.com/20170324/ac99d435cb6cde91f2a92013ec462a05.jpg)
$65k! A good buy. Won't last. Kha sold his for $85k.
-
$65k is still a lot of money but, somebody will buy it. And it won't be me!
Sent from my SM-G928V using Tapatalk
-
I want to see the video of that thing landing
-
I want to see the video of that thing landing
Ditto!
-
(https://uploads.tapatalk-cdn.com/20170324/ac99d435cb6cde91f2a92013ec462a05.jpg)
[/quote]
(https://uploads.tapatalk-cdn.com/20170324/ac99d435cb6cde91f2a92013ec462a05.jpg)
[/quote]
Looks a little like me @ BM GATR Clawls.
Did I miss which t case it has?
-
It didn't break.
-
I want!
This is the white jumping rig that proved to me how tough RockJock 70s are going straight up on Rocker Knocker and i mean vertical with all 4 way up in the air. Photo below.
Chuckie this was perfect for you @Trailabite
No price yet
Anyone looking to buy a 4dr JKU ?
2014
Bruiser LS3 430
Nag1 5spd auto
Rock Jock 70s
5.38s
Detroit front
ARB rear
Warn Hubs
JE Reel 1350 Drivelines
Raceline Monsters
BFG 40s Krawlers
Savvy LHT Bumpers
Savvy Rockrails
Savvy 4" suspension
Savvy 3link front
All 7 links 7075 aluminum
Radflow Double Bypass shocks
Radflow air bumps front n rear
Warn Zeon winch
Factor 55
Warn onboard air
Currie antirocks aluminum, front n rear
PSC Hydro assist Steering
Spod
Magnaflow Stainless exhaust
This Jeep is in amazing condition, looks n drives like new.
Serious buyers only, but it's priced at a very smokin deal I mean smokin deal..
(https://uploads.tapatalk-cdn.com/20170324/ac99d435cb6cde91f2a92013ec462a05.jpg)
did he post this somewhere?
-
I want!
This is the white jumping rig that proved to me how tough RockJock 70s are going straight up on Rocker Knocker and i mean vertical with all 4 way up in the air. Photo below.
Chuckie this was perfect for you @Trailabite
No price yet
Anyone looking to buy a 4dr JKU ?
2014
Bruiser LS3 430
Nag1 5spd auto
Rock Jock 70s
5.38s
Detroit front
ARB rear
Warn Hubs
JE Reel 1350 Drivelines
Raceline Monsters
BFG 40s Krawlers
Savvy LHT Bumpers
Savvy Rockrails
Savvy 4" suspension
Savvy 3link front
All 7 links 7075 aluminum
Radflow Double Bypass shocks
Radflow air bumps front n rear
Warn Zeon winch
Factor 55
Warn onboard air
Currie antirocks aluminum, front n rear
PSC Hydro assist Steering
Spod
Magnaflow Stainless exhaust
This Jeep is in amazing condition, looks n drives like new.
Serious buyers only, but it's priced at a very smokin deal I mean smokin deal..
(https://uploads.tapatalk-cdn.com/20170324/ac99d435cb6cde91f2a92013ec462a05.jpg)
did he post this somewhere?
A for sale ad? John Rocha of Savvy and friends posted it. I don't know if it is anywhere else yet.
He wants a 3.6 2 door Boys
Mike
Kent
-
I couldn't get mine to jump that high with a 100 foot head start
-
I want!
This is the white jumping rig that proved to me how tough RockJock 70s are going straight up on Rocker Knocker and i mean vertical with all 4 way up in the air. Photo below.
Chuckie this was perfect for you @Trailabite
No price yet
Anyone looking to buy a 4dr JKU ?
2014
Bruiser LS3 430
Nag1 5spd auto
Rock Jock 70s
5.38s
Detroit front
ARB rear
Warn Hubs
JE Reel 1350 Drivelines
Raceline Monsters
BFG 40s Krawlers
Savvy LHT Bumpers
Savvy Rockrails
Savvy 4" suspension
Savvy 3link front
All 7 links 7075 aluminum
Radflow Double Bypass shocks
Radflow air bumps front n rear
Warn Zeon winch
Factor 55
Warn onboard air
Currie antirocks aluminum, front n rear
PSC Hydro assist Steering
Spod
Magnaflow Stainless exhaust
This Jeep is in amazing condition, looks n drives like new.
Serious buyers only, but it's priced at a very smokin deal I mean smokin deal..
(https://uploads.tapatalk-cdn.com/20170324/ac99d435cb6cde91f2a92013ec462a05.jpg)
did he post this somewhere?
A for sale ad? John Rocha of Savvy and friends posted it. I don't know if it is anywhere else yet.
He wants a 3.6 2 door Boys
Mike
Kent
I'll trade him even up
Sent from my iPhone using Tapatalk
-
I want!
This is the white jumping rig that proved to me how tough RockJock 70s are going straight up on Rocker Knocker and i mean vertical with all 4 way up in the air. Photo below.
Chuckie this was perfect for you @Trailabite
No price yet
Anyone looking to buy a 4dr JKU ?
2014
Bruiser LS3 430
Nag1 5spd auto
Rock Jock 70s
5.38s
Detroit front
ARB rear
Warn Hubs
JE Reel 1350 Drivelines
Raceline Monsters
BFG 40s Krawlers
Savvy LHT Bumpers
Savvy Rockrails
Savvy 4" suspension
Savvy 3link front
All 7 links 7075 aluminum
Radflow Double Bypass shocks
Radflow air bumps front n rear
Warn Zeon winch
Factor 55
Warn onboard air
Currie antirocks aluminum, front n rear
PSC Hydro assist Steering
Spod
Magnaflow Stainless exhaust
This Jeep is in amazing condition, looks n drives like new.
Serious buyers only, but it's priced at a very smokin deal I mean smokin deal..
(https://uploads.tapatalk-cdn.com/20170324/ac99d435cb6cde91f2a92013ec462a05.jpg)
did he post this somewhere?
A for sale ad? John Rocha of Savvy and friends posted it. I don't know if it is anywhere else yet.
He wants a 3.6 2 door Boys
Mike
Kent
I'll trade him even up
Sent from my iPhone using Tapatalk
Poisoned pill
Sent from my SM-T813 using Tapatalk
-
I want!
This is the white jumping rig that proved to me how tough RockJock 70s are going straight up on Rocker Knocker and i mean vertical with all 4 way up in the air. Photo below.
Chuckie this was perfect for you @Trailabite
No price yet
Anyone looking to buy a 4dr JKU ?
2014
Bruiser LS3 430
Nag1 5spd auto
Rock Jock 70s
5.38s
Detroit front
ARB rear
Warn Hubs
JE Reel 1350 Drivelines
Raceline Monsters
BFG 40s Krawlers
Savvy LHT Bumpers
Savvy Rockrails
Savvy 4" suspension
Savvy 3link front
All 7 links 7075 aluminum
Radflow Double Bypass shocks
Radflow air bumps front n rear
Warn Zeon winch
Factor 55
Warn onboard air
Currie antirocks aluminum, front n rear
PSC Hydro assist Steering
Spod
Magnaflow Stainless exhaust
This Jeep is in amazing condition, looks n drives like new.
Serious buyers only, but it's priced at a very smokin deal I mean smokin deal..
(https://uploads.tapatalk-cdn.com/20170324/ac99d435cb6cde91f2a92013ec462a05.jpg)
did he post this somewhere?
A for sale ad? John Rocha of Savvy and friends posted it. I don't know if it is anywhere else yet.
He wants a 3.6 2 door Boys
Mike
Kent
I don't see it on his page or on Savvy's...link?
-
I got it from Rochas page
-
I want!
This is the white jumping rig that proved to me how tough RockJock 70s are going straight up on Rocker Knocker and i mean vertical with all 4 way up in the air. Photo below.
Chuckie this was perfect for you @Trailabite
No price yet
Anyone looking to buy a 4dr JKU ?
2014
Bruiser LS3 430
Nag1 5spd auto
Rock Jock 70s
5.38s
Detroit front
ARB rear
Warn Hubs
JE Reel 1350 Drivelines
Raceline Monsters
BFG 40s Krawlers
Savvy LHT Bumpers
Savvy Rockrails
Savvy 4" suspension
Savvy 3link front
All 7 links 7075 aluminum
Radflow Double Bypass shocks
Radflow air bumps front n rear
Warn Zeon winch
Factor 55
Warn onboard air
Currie antirocks aluminum, front n rear
PSC Hydro assist Steering
Spod
Magnaflow Stainless exhaust
This Jeep is in amazing condition, looks n drives like new.
Serious buyers only, but it's priced at a very smokin deal I mean smokin deal..
(https://uploads.tapatalk-cdn.com/20170324/ac99d435cb6cde91f2a92013ec462a05.jpg)
did he post this somewhere?
A for sale ad? John Rocha of Savvy and friends posted it. I don't know if it is anywhere else yet.
He wants a 3.6 2 door Boys
Mike
Kent
I don't see it on his page or on Savvy's...link?
(https://uploads.tapatalk-cdn.com/20170324/4e1217c8955d3ad6ef2137e43531474f.jpg)
-
probably not a good deal but... wow never seen this.
http://www.ebay.com/itm/1994-Ford-F-350-XLT-CUSTOM-/222441273548?hash=item33ca8878cc:g:n7oAAOSw2gxYn-TW&vxp=mtr
I like it, but no interior pics.
-
This was @ PAP down @ the airport. The only thing I saw missing was the air box & rear seat. Bad part is that it's from NY. It's a tad rusted out. The 4.0 & AX-15 should still be fine. I couldn't find out how many miles it has.
(http://i1146.photobucket.com/albums/o524/granthousehold1/Mobile%20Uploads/2017-03/20170325_111421_zpskta6lohe.jpg) (http://s1146.photobucket.com/user/granthousehold1/media/Mobile%20Uploads/2017-03/20170325_111421_zpskta6lohe.jpg.html)
-
probably not a good deal but... wow never seen this.
http://www.ebay.com/itm/1994-Ford-F-350-XLT-CUSTOM-/222441273548?hash=item33ca8878cc:g:n7oAAOSw2gxYn-TW&vxp=mtr
Never seen one of those before, good find. Would love to have it.
-
40's on stock axles??
http://www.hardlinecrawlers.com/forums/index.php?topic=55524.0;topicseen
-
40's on stock axles??
http://www.hardlinecrawlers.com/forums/index.php?topic=55524.0;topicseen
For all mall / attention like all the others that slap on bigger things to drive around on.
Sent from my SM-G935V using Tapatalk
-
He has upgraded them a lot to what many here and around have run 37s on. Wouldn't be a bad rig on 37s
Rubicon Dana 44 axles
5.38 gears (Yukon)
Front Gusseted and Sleeved
Chromoly axle shafts front and rear (Yukon)
-
37s- sure but 40s seems a tad much for stock axles even for a mall crawler.
I guess my XJ started as a mall crawler too. When I bought it, it had bald 38s on the stock Dana 30.
-
No... just no
https://greenville.craigslist.org/cto/6026792770.html
https://greenville.craigslist.org/cto/6049585727.html
-
No... just no
https://greenville.craigslist.org/cto/6026792770.html
https://greenville.craigslist.org/cto/6049585727.html
Ooh...I love it!
-
The Clemson buggy is cool.
Sent from my SM-G928V using Tapatalk
-
No... just no
https://greenville.craigslist.org/cto/6026792770.html
https://greenville.craigslist.org/cto/6049585727.html
Ooh...I love it!
BARF ON BOTH ACCOUNTS.
-
No... just no
https://greenville.craigslist.org/cto/6026792770.html
https://greenville.craigslist.org/cto/6049585727.html
Ooh...I love it!
BARF ON BOTH ACCOUNTS.
Yeah, I don't understand why either was built or why either will sell. But they were, and they will!
-
(http://www.jkowners.com/forum/images/smilies/rainbow2.gif)
(https://images.craigslist.org/00E0E_4yVDQRB5sw7_600x450.jpg)
-
(http://www.jkowners.com/forum/images/smilies/rainbow2.gif)
(https://images.craigslist.org/00E0E_4yVDQRB5sw7_600x450.jpg)
You know this can be fixed with a few cans of Krylon.... //;D//
-
(http://www.jkowners.com/forum/images/smilies/rainbow2.gif)
(https://images.craigslist.org/00E0E_4yVDQRB5sw7_600x450.jpg)
You know this can be fixed with a few cans of Krylon.... //;D//
I thought that at first but it's more like a razor build, Paint won't fix the wheels and tires and up travel
-
https://spacecoast.craigslist.org/cto/6034661164.html
Pretty good deal on a V8 JKU
-
https://spacecoast.craigslist.org/cto/6034661164.html
Pretty good deal on a V8 JKU
Scam scum
-
https://spacecoast.craigslist.org/cto/6034661164.html
Pretty good deal on a V8 JKU
Scam scum
I always find the scams it seems...
-
FYI.
Gander mountain in snellville is have a "store closing" sale. Everything discounted storewide
Sent from my iPhone using Tapatalk
-
Thought someone here might be interested in this one for sale.
http://silverautobrokers.com/inventory/35846/view/138/Suwanee-GA/2012-Ram-2500
Sent from my iPhone using Tapatalk
-
speaking of trucks.....http://www.jeeptruck.com/sale/sale.html
-
Thought someone here might be interested in this one for sale.
http://silverautobrokers.com/inventory/35846/view/138/Suwanee-GA/2012-Ram-2500
Sent from my iPhone using Tapatalk
.
This is probably the appropriate thread for that, not the 4 others, though I do not think it is a deal personally.
Sorry all, I did not realize they were not appropriate for the threads I put it on.
I saw a bunch of you looking for vehicles and felt he might be able to help. He found me exactly what I was looking two times.
Sent from my iPhone using Tapatalk
-
speaking of trucks.....http://www.jeeptruck.com/sale/sale.html
Soo much want that Chief! 48000 original miles.
-
speaking of trucks.....http://www.jeeptruck.com/sale/sale.html
I like that '81 Honcho but could find better things to do with $40k.
-
http://www.jeeptruck.com/mjs/sale16/adm538/adm538.html
-
Good deal(https://uploads.tapatalk-cdn.com/20170418/76e56b2989d8272141a94cbfd2d1bcc0.jpg)
-
Zack,
https://atlanta.craigslist.org/atl/cto/6085576855.html
nice little 4 banger yj --$3800.00
-
Zack,
https://atlanta.craigslist.org/atl/cto/6085576855.html
nice little 4 banger yj --$3800.00
not much rust on CL = rust bucket in real life.
-
Those white jeeps show rust more....its just surface rust...it'll buff out!
-
WJM patena
-
Zack,
https://atlanta.craigslist.org/atl/cto/6085576855.html
nice little 4 banger yj --$3800.00
Not a good deal for that sucker.
-
Zack,
https://atlanta.craigslist.org/atl/cto/6085576855.html
nice little 4 banger yj --$3800.00
Not a good deal for that sucker.
the TJ or Zack ?
-
Zack,
https://atlanta.craigslist.org/atl/cto/6085576855.html
nice little 4 banger yj --$3800.00
Not a good deal for that sucker.
the TJ or Zack ?
That 4 cyl is a YJ and not a good deal for $3800
Maybe $2K
-
Zack,
https://atlanta.craigslist.org/atl/cto/6085576855.html
nice little 4 banger yj --$3800.00
Not a good deal for that sucker.
the TJ or Zack ?
That 4 cyl is a YJ and not a good deal for $3800
Maybe $2K
yea for sure. That only slightly edges out a 4 door auto with a 3.8 in the crappiness scale
-
Zack,
https://atlanta.craigslist.org/atl/cto/6085576855.html
nice little 4 banger yj --$3800.00
Not a good deal for that sucker.
the TJ or Zack ?
That 4 cyl is a YJ and not a good deal for $3800
Maybe $2K
yea for sure. That only slightly edges out a 4 door auto with a 3.8 in the crappiness scale
LOL
Sent from my SM-G930V using Tapatalk
-
Perfect pig for Jay and Ben
https://atlanta.craigslist.org/atl/cto/6083101976.html
-
Perfect pig for Jay and Ben
https://atlanta.craigslist.org/atl/cto/6083101976.html
Hahahaha
-
Perfect pig for Jay and Ben
https://atlanta.craigslist.org/atl/cto/6083101976.html
Hahahaha
Mine has a bench up front. We barely fit, but we do!
-
Perfect pig for Jay and Ben
https://atlanta.craigslist.org/atl/cto/6083101976.html
Hahahaha
Mine has a bench up front. We barely fit, but we do!
They are small now, they will get bigger and you and Tony will swap
-
Perfect pig for Jay and Ben
https://atlanta.craigslist.org/atl/cto/6083101976.html
Hahahaha
Mine has a bench up front. We barely fit, but we do!
They are small now, they will get bigger and you and Tony will swap
Nope, gonna start sending them to college soon.
-
Pretty cool toy if you have hunting land
https://atlanta.craigslist.org/sat/cto/6078145885.html
-
Pretty cool toy if you have hunting land
https://atlanta.craigslist.org/sat/cto/6078145885.html
Would be pretty sweet offroad with some of those Trep's you got laying around
-
Pretty cool toy if you have hunting land
https://atlanta.craigslist.org/sat/cto/6078145885.html
My buddy has had one of these for about 12 years and it's awesome!!!! Pretty capable too!!
(https://uploads.tapatalk-cdn.com/20170425/9b3e3e56effb9210e06481f35e1a4740.jpg)(https://uploads.tapatalk-cdn.com/20170425/20144697148932cf1e56073348e4230c.jpg)
Sent from my iPhone using Tapatalk
-
Is this Lincoln 180 a good deal, $450. ??
https://atlanta.craigslist.org/atl/bfs/6104022308.html
-
Is this Lincoln 180 a good deal, $450. ??
https://atlanta.craigslist.org/atl/bfs/6104022308.html
Why is "new" in quotations in the listing?
It's a good welder, and the price isn't bad for "new"
-
I have a 175Hd (HD = Home Depot) that I paid ~400 for 8-9 years ago. The difference in the HD models is that some of the parts are plastic where the mainline welders will be metal. For example, I broke the plastic feed knob on mine and couldn't find a replacement easily. Ended up machining one.
-
https://atlanta.craigslist.org/nat/cto/6077908471.html
-
I have this and bought another for my other cordless tools bag at the lake.
$15 and has a lot of great stuff to have handy.
https://m.sears.com/craftsman-100-piece-accessory-kit/p-00931639000P?sid=IAx20150327xVigLink&aff=Y&PID=6165589&AID=11042411&utm_medium=2470763_6165589_11042411
(https://uploads.tapatalk-cdn.com/20170426/b36681c56a72ceb37b9ee4a0f35575e6.jpg)
-
https://atlanta.craigslist.org/nat/cto/6077908471.html
I love that one pic has a price listed that is $1k below the craigslist price...awesome
Sent from my SM-G930V using Tapatalk
-
I can't figure the thing out. Whats with the doors and top???
Sent from my SM-G920P using Tapatalk
-
30mpg? maybe downhill. //;D//
-
I can't figure the thing out. Whats with the doors and top???
Sent from my SM-G920P using Tapatalk
They are ugly. Plus, its a Might u be hi.
-
Is this Lincoln 180 a good deal, $450. ??
https://atlanta.craigslist.org/atl/bfs/6104022308.html
Why is "new" in quotations in the listing?
It's a good welder, and the price isn't bad for "new"
Looks like it cold be from a salvage sale.
-
https://atlanta.craigslist.org/nat/cto/6077908471.html
Wow. Never seen that before. Quite strange looking.
-
In case anyone is looking for some Ford axles....
Don't know anything else about it except I came across it while looking for some other stuff.
https://atlanta.craigslist.org/nat/cto/6071297664.html
-
87 Mitsubishi?
https://images.craigslist.org/00w0w_lWCqz5B5tse_1200x900.jpg
-
Yeap. Look @ the emblem stamped into the grill.
-
https://gadsden.craigslist.org/cto/6088195335.html
-
87 Mitsubishi?
https://images.craigslist.org/00w0w_lWCqz5B5tse_1200x900.jpg
When I picture what a Japanese knockoff of a Jeep would look like...this is it.
-
Not sure if this is really a good deal but thought it was pretty sweet.
https://atlanta.craigslist.org/atl/cto/6109599141.html
(https://uploads.tapatalk-cdn.com/20170430/c1bf71abbd87f70a430fb48248986242.jpeg)
-
Not sure if this is really a good deal but thought it was pretty sweet.
https://atlanta.craigslist.org/atl/cto/6109599141.html
(https://uploads.tapatalk-cdn.com/20170430/c1bf71abbd87f70a430fb48248986242.jpeg)
I love it, but that's crazy money.
-
Nice but crazy money is a good description. Way too much. That hydro assist would have to be redone also.
How do those things wheel Don? Not interested in buying it, just curious.
-
What do you do with it? Not a wheeling rig. A ride around and show rig? Yep serious $.
-
Nice but crazy money is a good description. Way too much. That hydro assist would have to be redone also.
How do those things wheel Don? Not interested in buying it, just curious.
that is a sweet rig, although like all other comments, a little pricy. As to how do they wheel, I saw a couple of these while wheeling out in New Mexico (Chile Challenge) with Josh (JvC) they ran all the trails we run with no problems. quite impressive really, considering we ran some pretty tough trails.
-
Nice but crazy money is a good description. Way too much. That hydro assist would have to be redone also.
How do those things wheel Don? Not interested in buying it, just curious.
that is a sweet rig, although like all other comments, a little pricy. As to how do they wheel, I saw a couple of these while wheeling out in New Mexico (Chile Challenge) with Josh (JvC) they ran all the trails we run with no problems. quite impressive really, considering we ran some pretty tough trails.
It's all about the setup. Were they custom?
-
that old Bronco at Harlan was pretty sweet
-
Not sure if this is really a good deal but thought it was pretty sweet.
https://atlanta.craigslist.org/atl/cto/6109599141.html (https://atlanta.craigslist.org/atl/cto/6109599141.html)
(https://uploads.tapatalk-cdn.com/20170430/c1bf71abbd87f70a430fb48248986242.jpeg)
The problem with this Bronco is that it is not "Restored". It is a customize restomod Bronco. That narrows the market A LOT. The owner probably started the project to build HIS idea of a restomod Bronco, but didn't realize the other "Real Resotred" vehicles that you can buy for $47k.
http://www.ebay.com/sch/Cars-Trucks/6001/i.html?_sofindtype=21&_vxp=mtr&fisc=c6001&Make=-1&Transmission=-1&_sadis=200&_fpos&_fsct&_sop=12&_ipg=200&Model%2520Year=1955%7C1956%7C1957%7C1958%7C1959%7C1960%7C1961%7C1962%7C1963%7C1964%7C1965%7C1966%7C1967%7C1968%7C1969%7C1970%7C1971%7C1972%7C1973%7C1974%7C1975&LH_BIN=1&_mPrRngCbx=1&_udlo=30%2C000&_udhi=50%2C000&_stpos=30075&_fspt=1&_nkw=Restored&LH_PrefLoc=99&_dcat=6001&rt=nc
-
In case anyone is interested in a blank slate. (https://uploads.tapatalk-cdn.com/20170501/90caae6cf62777351c84491f15314bc5.jpg)
From Facebook Georgia jeep parts for sale or trade page.
Sent from my iPhone using Tapatalk
-
Not CL but saw this on FB:
Bolt in Dana 60s for a jk
$8,500
South Boardman, MI
I have a set of axles that bolt into a jk... almost haha
Front is a
Currie rock jock 60
Reid knuckles
Rcv 35 spline.
Arb
4.88 gears
Teraflex big brake kit
Synergy ball joints
Synergy steering with the rod flip
All hd brackets on the axle
Hd diff cover with 3 link kit on it. Link can go to the stock upper link mount on the frame (how it's setup currently and will provide upper link.
Rear is a teraflex 60 with the tilted pig like a rock jock.
35 spline chromoly shafts
Arb
4.88 gears.
Set up for mild 3 link in the rear right over the pig.
Has all teraflex hd brackets on the axle also.
New these axles were over $11500 without the upgraded rcv and Reid knuckles and big brake kit
$8500. Will come with steering also.
Pics to follow shortly.
Call or text 2316313556 thanks Kyle
-
//letseat// https://atlanta.craigslist.org/nat/pts/6084088917.html
-
Cheap... https://dayton.craigslist.org/cto/6124238652.html
-
Its got a good bit of miles but the worst part- it looks like a rust bucket.
-
I have always wanted one of these.
http://www.hardlinecrawlers.com/forums/index.php?topic=55277.0
-
I have always wanted one of these.
http://www.hardlinecrawlers.com/forums/index.php?topic=55277.0
Maybe so, but not that one...3.5k lbs axles, tongue weight looks like it'll be very light
-
I have always wanted one of these.
http://www.hardlinecrawlers.com/forums/index.php?topic=55277.0
Perfect setup IMO. Everything you need. Shower is the super bonus here.
-
I have always wanted one of these.
http://www.hardlinecrawlers.com/forums/index.php?topic=55277.0
Maybe so, but not that one...3.5k lbs axles, tongue weight looks like it'll be very light
Ture. The axles/springs are too small for my setup. Those box living quarters on a bigger trailer would be sweet.
-
That is PERFECT for what we do!! IMO
-
That is PERFECT for what we do!! IMO
I heard you're in the market...chop chop
Sent from my SM-G930V using Tapatalk
-
http://www.autotrader.com/cars-for-sale/vehicledetails.xhtml?listingId=457326557&zip=30075&referrer=%2Fcars-for-sale%2Fsearchresults.xhtml%3Fzip%3D30075%26showcaseOwnerId%3D64164939%26startYear%3D2011%26incremental%3Dall%26endYear%3D2013%26modelCodeList%3DCHEVSUB%26makeCodeList%3DCHEV%26driveGroup%3DAWD4WD%26listingTypes%3Dused%26sortBy%3DdistanceASC%26firstRecord%3D0%26searchRadius%3D0%26trimCodeList%3DCHEVSUB%257C2500%2BLT&listingTypes=used&startYear=2011&numRecords=25&firstRecord=0&endYear=2013&modelCodeList=CHEVSUB&makeCodeList=CHEV&searchRadius=0&makeCode1=CHEV&modelCode1=CHEVSUB
-
Not sure if this is really a good deal but thought it was pretty sweet.
https://atlanta.craigslist.org/atl/cto/6109599141.html (https://atlanta.craigslist.org/atl/cto/6109599141.html)
(https://uploads.tapatalk-cdn.com/20170430/c1bf71abbd87f70a430fb48248986242.jpeg)
The problem with this Bronco is that it is not "Restored". It is a customize restomod Bronco. That narrows the market A LOT. The owner probably started the project to build HIS idea of a restomod Bronco, but didn't realize the other "Real Resotred" vehicles that you can buy for $47k.
http://www.ebay.com/sch/Cars-Trucks/6001/i.html?_sofindtype=21&_vxp=mtr&fisc=c6001&Make=-1&Transmission=-1&_sadis=200&_fpos&_fsct&_sop=12&_ipg=200&Model%2520Year=1955%7C1956%7C1957%7C1958%7C1959%7C1960%7C1961%7C1962%7C1963%7C1964%7C1965%7C1966%7C1967%7C1968%7C1969%7C1970%7C1971%7C1972%7C1973%7C1974%7C1975&LH_BIN=1&_mPrRngCbx=1&_udlo=30%2C000&_udhi=50%2C000&_stpos=30075&_fspt=1&_nkw=Restored&LH_PrefLoc=99&_dcat=6001&rt=nc
You are technically correct, it is not restored and the dash is an example of shit I hate. Unless I was taking a hard stance on restoring to original, I wouldn't put a 302 back in and would go to a new engine (e.g. 5.0 efi or coyote) so I would be restomoding one myself. The suspension I mentioned would also make it a restomod.
To re-answer Tony's question, a restored to factory Bronco wheels like an old factory vehicle. Like a Jeep you can do a ton of stuff to them though the aftermarket is much smaller than the Jeep aftermarket.
Still for sale - shocking (or not)
-
Not
THIS ^^^^
-
At the auction this morning...
Double tag 34' Down 2 Earth
(http://www.npauctions.com/AMSProto/temp/If8b98edf-ca3b-4649-bd53-31e545d483c5_1600_1200.JPG)
-
That's a big trailer for a bumper pull.
Sent from my iPhone using Tapatalk
-
At the auction this morning...
Double tag 34' Down 2 Earth
(http://www.npauctions.com/AMSProto/temp/If8b98edf-ca3b-4649-bd53-31e545d483c5_1600_1200.JPG)
What did it sell for?
-
At the auction this morning...
Double tag 34' Down 2 Earth
(http://www.npauctions.com/AMSProto/temp/If8b98edf-ca3b-4649-bd53-31e545d483c5_1600_1200.JPG)
What did it sell for?
I don't know I haven't bought it for you yet are you good to $3500?
14000# 34'
Year 2016
Make DOWN 2 EARTH
Model DTE8234WCH78
VIN 5MYUU3429GB051279
-
(http://www.npauctions.com/AMSProto/temp/If975d308-542b-4022-81ac-9c1d8fac45cb_1600_1200.JPG)
(http://www.npauctions.com/AMSProto/temp/Ic36a2f1e-5c7d-47f2-a2de-befd2c617c45_1600_1200.JPG)
-
(http://www.npauctions.com/AMSProto/temp/I0382cfb7-7263-458c-af3c-9ebce0f9c0f6_1600_1200.JPG)
(http://www.npauctions.com/AMSProto/temp/I8cf3c586-b503-4b78-a895-86a9af18c353_1600_1200.JPG)
-
Or this one if you prefer, major want
(http://www.npauctions.com/AMSProto/temp/If77a6ae5-5774-45a2-8b0e-d7327c36b48e_1600_1200.JPG)
-
Or this one if you prefer, major want
(http://www.npauctions.com/AMSProto/temp/If77a6ae5-5774-45a2-8b0e-d7327c36b48e_1600_1200.JPG)
3500 $?
Sent from my SM-G930V using Tapatalk
-
That's a big trailer for a bumper pull.
I've owned 2 of these and 1 triple axle 15000 gvwr. Its different for sure but you keep your truck space and sleeping area setup if you have one in a camper shell.
They work best with a long bed, short bed can do a wheelie on a CO or UT bump. Ask me how I know.
-
CLUB NEEDS TO OWN THIS
At the auction this morning...
Double tag 34' Down 2 Earth
(http://www.npauctions.com/AMSProto/temp/If8b98edf-ca3b-4649-bd53-31e545d483c5_1600_1200.JPG)
-
I don't know I haven't bought it for you yet are you good to $3500?
14000# 34'
Year 2016
Make DOWN 2 EARTH
Model DTE8234WCH78
VIN 5MYUU3429GB051279
I am just curious as to what it sells for. Saving my pennies for the Atlas to go with the LH6/4l60e combo sitting in my garage floor.
-
I don't know I haven't bought it for you yet are you good to $3500?
14000# 34'
Year 2016
Make DOWN 2 EARTH
Model DTE8234WCH78
VIN 5MYUU3429GB051279
I am just curious as to what it sells for. Saving my pennies for the Atlas to go with the LH6/4l60e combo sitting in my garage floor.
The economy is back
Sold for $4800
Would have cost you at least $4900 plus fees.
-
http://www.jkowners.com/forum/sale-jeeps-any-model/355874-2012-jku-392-hemi-overland.html
-
2005 Jeep Wrangler Unlimited Rubicon - tons, atlas, coilovers
https://r.tapatalk.com/shareLink?share_fid=32116&share_tid=56031&url=http%3A%2F%2Fwww%2Ehardlinecrawlers%2Ecom%2Fforums%2Findex%2Ephp%3Ftopic%3D56031&share_type=t
-
2005 Jeep Wrangler Unlimited Rubicon - tons, atlas, coilovers
https://r.tapatalk.com/shareLink?share_fid=32116&share_tid=56031&url=http%3A%2F%2Fwww%2Ehardlinecrawlers%2Ecom%2Fforums%2Findex%2Ephp%3Ftopic%3D56031&share_type=t
I thought it was a good deal too but the wife said no.
-
2005 Jeep Wrangler Unlimited Rubicon - tons, atlas, coilovers
https://r.tapatalk.com/shareLink?share_fid=32116&share_tid=56031&url=http%3A%2F%2Fwww%2Ehardlinecrawlers%2Ecom%2Fforums%2Findex%2Ephp%3Ftopic%3D56031&share_type=t
I thought it was a good deal too but the wife said no.
That just means that she wants to be surprised
-
2005 Jeep Wrangler Unlimited Rubicon - tons, atlas, coilovers
https://r.tapatalk.com/shareLink?share_fid=32116&share_tid=56031&url=http%3A%2F%2Fwww%2Ehardlinecrawlers%2Ecom%2Fforums%2Findex%2Ephp%3Ftopic%3D56031&share_type=t
I thought it was a good deal too but the wife said no.
That just means that she wants to be surprised
J Ray is going for 'line of the day' with that one. Funny
Sent from my SM-G930V using Tapatalk
-
She wants a 4 door JKUR, I want the 2 door version. As I always get her hand-me-down car. We will work it out in time.
Its also the wrong color. It HAS to be red.
-
She wants a 4 door JKUR, I want the 2 door version. As I always get her hand-me-down car. We will work it out in time.
Its also the wrong color. It HAS to be red.
My wife told me the other day that I should get a 4 door. I told her that starting over would be very expensive and besides, I like having a REAL JEEP. //LMAO//
-
She wants a 4 door JKUR, I want the 2 door version. As I always get her hand-me-down car. We will work it out in time.
Its also the wrong color. It HAS to be red.
My wife told me the other day that I should get a 4 door. I told her that starting over would be very expensive and besides, I like having a REAL JEEP. //LMAO//
When did you get a real jeep?? Post it up
-
She wants a 4 door JKUR, I want the 2 door version. As I always get her hand-me-down car. We will work it out in time.
Its also the wrong color. It HAS to be red.
My wife told me the other day that I should get a 4 door. I told her that starting over would be very expensive and besides, I like having a REAL JEEP. //LMAO//
When did you get a real jeep?? Post it up
It's too awesome to post.
-
She wants a 4 door JKUR, I want the 2 door version. As I always get her hand-me-down car. We will work it out in time.
Its also the wrong color. It HAS to be red.
My wife told me the other day that I should get a 4 door. I told her that starting over would be very expensive and besides, I like having a REAL JEEP. //LMAO//
I think your wife deserves a like. Is there a way to only like half of a comment?
I'll pass it along to her Don. Two door guys are definitely the minority in the Jeep world now.
-
She wants a 4 door JKUR, I want the 2 door version. As I always get her hand-me-down car. We will work it out in time.
Its also the wrong color. It HAS to be red.
My wife told me the other day that I should get a 4 door. I told her that starting over would be very expensive and besides, I like having a REAL JEEP. //LMAO//
I think your wife deserves a like. Is there a way to only like half of a comment?
I'll pass it along to her Don. Two door guys are definitely the minority in the Jeep world now.
And will be for the rest of time
Sent from my SM-G930V using Tapatalk
-
She wants a 4 door JKUR, I want the 2 door version. As I always get her hand-me-down car. We will work it out in time.
Its also the wrong color. It HAS to be red.
My wife told me the other day that I should get a 4 door. I told her that starting over would be very expensive and besides, I like having a REAL JEEP. //LMAO//
I think your wife deserves a like. Is there a way to only like half of a comment?
I'll pass it along to her Don. Two door guys are definitely the minority in the Jeep world now.
And will be for the rest of time
Sent from my SM-G930V using Tapatalk
You are correct ... well, until the truck comes out in 2019. You'll see a ton of those.
-
If I got a four door. I'd still take out the back seats.
-
I'd drive a 4 door.........................................truck that is //;D//
-
She wants a 4 door JKUR, I want the 2 door version. As I always get her hand-me-down car. We will work it out in time.
Its also the wrong color. It HAS to be red.
My wife told me the other day that I should get a 4 door. I told her that starting over would be very expensive and besides, I like having a REAL JEEP. //LMAO//
I think your wife deserves a like. Is there a way to only like half of a comment?
I'll pass it along to her Don. Two door guys are definitely the minority in the Jeep world now.
And will be for the rest of time
Sent from my SM-G930V using Tapatalk
You are correct ... well, until the truck comes out in 2019. You'll see a ton of those.
I'm not so sure...the old jeep trucks never really sold well.
Sent from my SM-G930V using Tapatalk
-
They were not the best sellers but now they are desireable. Funny how that works.
-
I actually agree with you Don.
Sent from my SM-G955U using Tapatalk
-
They were not the best sellers but now they are desireable. Funny how that works.
I think it'll be a repeat of history. I personally want one but I want a Jeep with a smaller/shorter truck bed, not a full truck bed. My bet is that what goes to production will be too big, too much overhang in the rear, and won't be different enough from a Ford Ranger or Tacoma for example. So, Jeep truck sales will do good for a year, then the Ford Ranger will make it's comeback in 2019/2020 and Toyota will do something with the Tacoma line to fight the incursion into it's sales, and then Jeep will stop making the Jeep truck again. 30 years later people will again say "They were not the best sellers but now they are desirable. Funny how that works." :)
I agree with the outcome. My perspective is that a Jeep is a jeep, and trying to make a Jeep in to a truck, is just tough in the market. A guy takes his wife out looking for a "truck" and goes to the Jeep dealership, then they go look at any other truck and realize that the interior is nicer on a non-Jeep truck, and discuss the foolishness in taking a $40K vehicle off road, so why are we looking at a Jeep truck again?
-
They were not the best sellers but now they are desireable. Funny how that works.
I think it'll be a repeat of history. I personally want one but I want a Jeep with a smaller/shorter truck bed, not a full truck bed. My bet is that what goes to production will be too big, too much overhang in the rear, and won't be different enough from a Ford Ranger or Tacoma for example. So, Jeep truck sales will do good for a year, then the Ford Ranger will make it's comeback in 2019/2020 and Toyota will do something with the Tacoma line to fight the incursion into it's sales, and then Jeep will stop making the Jeep truck again. 30 years later people will again say "They were not the best sellers but now they are desirable. Funny how that works." :)
I agree with the outcome. My perspective is that a Jeep is a jeep, and trying to make a Jeep in to a truck, is just tough in the market. A guy takes his wife out looking for a "truck" and goes to the Jeep dealership, then they go look at any other truck and realize that the interior is nicer on a non-Jeep truck, and discuss the foolishness in taking a $40K vehicle off road, so why are we looking at a Jeep truck again?
So now its a $40k off road argument? I think those that buy the jeep truck are just like the SUV driver. They like to "think" they can go off road, but it will be cooler and they can easily carry a kayak or slide in camper. Most jeeps are never driven off road, and most of us that do are probably foolish. But that's another discussion.
-
https://atlanta.craigslist.org/atl/pts/6111737680.html
37s and wheels for under 2k
-
Not sure if this is a good deal, but maybe someone needs a 37" spare Trep.
https://www.facebook.com/photo.php?fbid=1237750119680704&set=pcb.1948855738704941&type=3&theater
-
Not sure if this is a good deal, but maybe someone needs a 37" spare Trep.
https://www.facebook.com/photo.php?fbid=1237750119680704&set=pcb.1948855738704941&type=3&theater
Can't open the link. I would need 3 more though lol
-
Milwaukee cordless impact with free grease gun
http://www.northerntool.com/shop/tools/product_200619498_200619498
-
Milwaukee cordless impact with free grease gun
http://www.northerntool.com/shop/tools/product_200619498_200619498
I saw this too and wondered who I could get to buy the grease gun from me.
Sent from my iPhone using Tapatalk
-
Milwaukee cordless impact with free grease gun
http://www.northerntool.com/shop/tools/product_200619498_200619498
I saw this too and wondered who I could get to buy the grease gun from me.
Sent from my iPhone using Tapatalk
I will buy it for 50 bucks
Sent from my iPhone using Tapatalk
-
Milwaukee cordless impact with free grease gun
http://www.northerntool.com/shop/tools/product_200619498_200619498
I have that same impact and it is badass. Total beast
-
For $400 it better be!! Lol
-
For $400 it better be!! Lol
@Cranvilstan I'll seek it to you for $200 if I can borrow it once a year.
Sent from my iPhone using Tapatalk
-
https://atlanta.craigslist.org/nat/cto/6151373202.html
are all toyo trucks tan?
-
I listed the sailboat for sale so of course I am looking at other toys.
https://atlanta.craigslist.org/nat/cto/6104690544.html
-
I listed the sailboat for sale so of course I am looking at other toys.
https://atlanta.craigslist.org/nat/cto/6104690544.html
I don't think you can call that a Suzuki anymore
-
I listed the sailboat for sale so of course I am looking at other toys.
https://atlanta.craigslist.org/nat/cto/6104690544.html
The new cage is infinitely nicer looking than the old cage, that's for sure.
-
I listed the sailboat for sale so of course I am looking at other toys.
https://atlanta.craigslist.org/nat/cto/6104690544.html
The new cage is infinitely nicer looking than the old cage, that's for sure.
AGREED!
-
I listed the sailboat for sale so of course I am looking at other toys.
https://atlanta.craigslist.org/nat/cto/6104690544.html
The new cage is infinitely nicer looking than the old cage, that's for sure.
AGREED!
Last one needed more rectangulation
Sent from my SM-G955U using Tapatalk
(https://uploads.tapatalk-cdn.com/20170601/f63b7ae8badec03b2c603a4e7b48acda.jpg)
-
https://atlanta.craigslist.org/atl/cto/6161028447.html
(https://uploads.tapatalk-cdn.com/20170604/1417e03fd2d4efe6f53901c0177db51a.jpeg)
-
https://atlanta.craigslist.org/wat/pts/6181787139.html Soft doors for a jk
-
https://atlanta.craigslist.org/wat/pts/6181787139.html Soft doors for a jk
AJ!!!!!!!
-
A special 2 for 1 deal. Great for anyone looking to go green lol.
http://www.ebay.com/itm/152583556781
-
https://atlanta.craigslist.org/wat/pts/6181787139.html Soft doors for a jk
AJ!!!!!!!
FYI
all the bestop keys fit those door locks so if wanted to lock the doors you can get a key from Bestop or find a guy who has two keys and get one of his
-
https://atlanta.craigslist.org/wat/pts/6181787139.html Soft doors for a jk
AJ!!!!!!!
FYI
all the bestop keys fit those door locks so if wanted to lock the doors you can get a key from Bestop or find a guy who has two keys and get one of his
Need the # on the lock to match the key. I have a few different locks and the same key doesn't fit them all.
-
https://atlanta.craigslist.org/wat/pts/6181787139.html Soft doors for a jk
AJ!!!!!!!
FYI
all the bestop keys fit those door locks so if wanted to lock the doors you can get a key from Bestop or find a guy who has two keys and get one of his
Need the # on the lock to match the key. I have a few different locks and the same key doesn't fit them all.
interesting. Mine has fit other doors
-
https://atlanta.craigslist.org/wat/pts/6181787139.html Soft doors for a jk
AJ!!!!!!!
I offered him $200 on Facebook. Said he wouldn't take a penny less than asking price. Is it worth it at $350?
Sent from my iPhone using Tapatalk
-
Yes. Definitely worth it. But is that counting the dumb tire cover? Who needs that ha ha.
Sent from my SM-G955U using Tapatalk
-
Soft doors is one of my favorite purchases!
-
That only 2 doors, not 4 right?
-
That only 2 doors, not 4 right?
Correct only the front 2.
-
Yes. Definitely worth it. But is that counting the dumb tire cover? Who needs that ha ha.
Sent from my SM-G955U using Tapatalk
Yea f**k the tire cover.
Sent from my iPhone using Tapatalk
-
I believe the jk doors are like $4-500 right? I know full soft doors for a TJ are $500.
Sent from my SM-G955U using Tapatalk
-
I believe the jk doors are like $4-500 right? I know full soft doors for a TJ are $500.
Sent from my SM-G955U using Tapatalk
Yea. Front set run $520 rears $500
Sent from my iPhone using Tapatalk
-
Yes. Definitely worth it. But is that counting the dumb tire cover? Who needs that ha ha.
Sent from my SM-G955U using Tapatalk
Yea f**k the tire cover.
Sent from my iPhone using Tapatalk
I bought mine used as a package with a soft top. Best deal I've ever pulled off.
-
Yes. Definitely worth it. But is that counting the dumb tire cover? Who needs that ha ha.
Sent from my SM-G955U using Tapatalk
Yea f**k the tire cover.
Sent from my iPhone using Tapatalk
I bought mine used as a package with a soft top. Best deal I've ever pulled off.
I remember you telling me this. I doubt anyone will ever find the deal you got. Just debating on whether to pull the trigger and just go ahead and scoop em up.
Sent from my iPhone using Tapatalk
-
https://atlanta.craigslist.org/wat/pts/6181787139.html Soft doors for a jk
AJ!!!!!!!
I offered him $200 on Facebook. Said he wouldn't take a penny less than asking price. Is it worth it at $350?
Sent from my iPhone using Tapatalk
I'd offer $349.99...and walk if he says no
Sent from my SM-G930V using Tapatalk
-
https://atlanta.craigslist.org/wat/pts/6181787139.html Soft doors for a jk
AJ!!!!!!!
I offered him $200 on Facebook. Said he wouldn't take a penny less than asking price. Is it worth it at $350?
Sent from my iPhone using Tapatalk
I'd offer $349.99...and walk if he says no
Sent from my SM-G930V using Tapatalk
Solid advice. It lets him know he doesn't make the rules
-
https://atlanta.craigslist.org/wat/pts/6181787139.html Soft doors for a jk
AJ!!!!!!!
I offered him $200 on Facebook. Said he wouldn't take a penny less than asking price. Is it worth it at $350?
Sent from my iPhone using Tapatalk
I'd offer $349.99...and walk if he says no
Sent from my SM-G930V using Tapatalk
Solid advice. It lets him know he doesn't make the rules
Alpha dog
Sent from my SM-G930V using Tapatalk
-
https://atlanta.craigslist.org/wat/pts/6181787139.html Soft doors for a jk
AJ!!!!!!!
I offered him $200 on Facebook. Said he wouldn't take a penny less than asking price. Is it worth it at $350?
Sent from my iPhone using Tapatalk
I'd offer $349.99...and walk if he says no
Sent from my SM-G930V using Tapatalk
Solid advice. It lets him know he doesn't make the rules
Alpha dog
Sent from my SM-G930V using Tapatalk
Unless you bring 350 and conveniently he doesn't have change
-
http://www.hardlinecrawlers.com/forums/index.php?topic=56390.0;topicseen
Already has an AW4 auto swap. Would make for a good start to a 1 ton Jeep project.
-
More tube doors.
https://atlanta.craigslist.org/nat/pts/6182092756.html
not sure what brand but pretty cheap.
-
A Tcdawg approved ride:
http://m.ebay.com/itm/132236322036?_mwBanner=1
-
^^^ $43,000 for a 2008?
Damn! That seems high
Sent from my iPhone using Tapatalk
-
^^^ $43,000 for a 2008?
Damn! That seems high
Sent from my iPhone using Tapatalk
If I remember correctly the engine conversion is around 25000
Sent from my iPhone using Tapatalk
-
^^^ $43,000 for a 2008?
Damn! That seems high
Sent from my iPhone using Tapatalk
If I remember correctly the engine conversion is around 25000
Sent from my iPhone using Tapatalk
Dang. That's a Hemi or LS swap in The JK
Sent from my iPhone using Tapatalk
-
^^^ $43,000 for a 2008?
Damn! That seems high
Sent from my iPhone using Tapatalk
If I remember correctly the engine conversion is around 25000
Sent from my iPhone using Tapatalk
It comes with wonton suspension and axles, correct?
Sent from my SM-G930V using Tapatalk
-
^^^ $43,000 for a 2008?
Damn! That seems high
Sent from my iPhone using Tapatalk
If I remember correctly the engine conversion is around 25000
Sent from my iPhone using Tapatalk
It comes with wonton suspension and axles, correct?
Sent from my SM-G930V using Tapatalk
Correct.
All the DMax running gear underneath. Also the DMax transfer case
-
^^^ $43,000 for a 2008?
Damn! That seems high
Sent from my iPhone using Tapatalk
If I remember correctly the engine conversion is around 25000
Sent from my iPhone using Tapatalk
It comes with wonton suspension and axles, correct?
Sent from my SM-G930V using Tapatalk
Correct.
All the DMax running gear underneath. Also the DMax transfer case
Don't forget crappy duramax steering
Sent from my iPhone using Tapatalk
-
^^^ $43,000 for a 2008?
Damn! That seems high
Sent from my iPhone using Tapatalk
If I remember correctly the engine conversion is around 25000
Sent from my iPhone using Tapatalk
It comes with wonton suspension and axles, correct?
Sent from my SM-G930V using Tapatalk
Correct.
All the DMax running gear underneath. Also the DMax transfer case
Don't forget crappy duramax steering
Sent from my iPhone using Tapatalk
It's only crappy when you are steering though
Or going straight
-
Hard to beat $478
(https://uploads.tapatalk-cdn.com/20170625/fe237f36b7ef7457b15a74f66769a6c1.jpg)
-
Hard to beat $478
(https://uploads.tapatalk-cdn.com/20170625/fe237f36b7ef7457b15a74f66769a6c1.jpg)
It is very nice to have one of those if you have the space for it.
Sent from my SM-G930V using Tapatalk
-
Nice deal on a large egg if it comes with what he says is comes with.
Large Big Green Egg
https://atlanta.craigslist.org/nat/for/6191660011.html
-
Nice deal on a large egg if it comes with what he says is comes with.
Large Big Green Egg
https://atlanta.craigslist.org/nat/for/6191660011.html
Smokin deal!
But why are you looking for a 3rd egg?
To mount on the goose of course.
-
Nice deal on a large egg if it comes with what he says is comes with.
Large Big Green Egg
https://atlanta.craigslist.org/nat/for/6191660011.html
Smokin deal!
But why are you looking for a 3rd egg?
To mount on the goose of course.
Bingo. No, I'm keeping an eye out for a minimax. But only crazy deal
-
some one needs to snag these!!! https://atlanta.craigslist.org/nat/pts/6192552579.html JK owners!!!
-
http://www.hardlinecrawlers.com/forums/index.php?topic=56394.0
-
some one needs to snag these!!! https://atlanta.craigslist.org/nat/pts/6192552579.html (https://atlanta.craigslist.org/nat/pts/6192552579.html) JK owners!!!
I contacted the seller. I'm going to buy them if they are available. Thanks Connor.
-
Hard to beat $478
(https://uploads.tapatalk-cdn.com/20170625/fe237f36b7ef7457b15a74f66769a6c1.jpg)
It looks like a good deal but in reality, it doesn't hold much. Needs more smaller/thinner drawers to hold more tools. The deep drawers will cause you to have to dig for tools. It would be good as a secondary box for BIG tools.
-
Hard to beat $478
(https://uploads.tapatalk-cdn.com/20170625/fe237f36b7ef7457b15a74f66769a6c1.jpg)
It looks like a good deal but in reality, it doesn't hold much. Needs more smaller/thinner drawers to hold more tools. The deep drawers will cause you to have to dig for tools. It would be good as a secondary box for BIG tools.
Mine is similar and works well for me; however, I don't use the top section as that part is always closed and crap is stacked on top.
Maybe you only have small tools for your factory JK and pretty bike???
Sent from my SM-G930V using Tapatalk
-
Hard to beat $478
(https://uploads.tapatalk-cdn.com/20170625/fe237f36b7ef7457b15a74f66769a6c1.jpg)
It looks like a good deal but in reality, it doesn't hold much. Needs more smaller/thinner drawers to hold more tools. The deep drawers will cause you to have to dig for tools. It would be good as a secondary box for BIG tools.
Mine is similar and works well for me; however, I don't use the top section as that part is always closed and crap is stacked on top.
Maybe you only have small tools for your factory JK and pretty bike???
Sent from my SM-G930V using Tapatalk
Doesn't take that many tools to adjust a light bar
-
Hard to beat $478
(https://uploads.tapatalk-cdn.com/20170625/fe237f36b7ef7457b15a74f66769a6c1.jpg)
It looks like a good deal but in reality, it doesn't hold much. Needs more smaller/thinner drawers to hold more tools. The deep drawers will cause you to have to dig for tools. It would be good as a secondary box for BIG tools.
Mine is similar and works well for me; however, I don't use the top section as that part is always closed and crap is stacked on top.
Maybe you only have small tools for your factory JK and pretty bike???
Sent from my SM-G930V using Tapatalk
for his stock jk he only needs an 18mm, 21mm sockets and a bunch of zip ties.
-
Hard to beat $478
(https://uploads.tapatalk-cdn.com/20170625/fe237f36b7ef7457b15a74f66769a6c1.jpg)
It looks like a good deal but in reality, it doesn't hold much. Needs more smaller/thinner drawers to hold more tools. The deep drawers will cause you to have to dig for tools. It would be good as a secondary box for BIG tools.
Mine is similar and works well for me; however, I don't use the top section as that part is always closed and crap is stacked on top.
Maybe you only have small tools for your factory JK and pretty bike???
Sent from my SM-G930V using Tapatalk
Doesn't take that many tools to adjust a light bar
Nice! Pat has the lead atm.
-
Hard to beat $478
(https://uploads.tapatalk-cdn.com/20170625/fe237f36b7ef7457b15a74f66769a6c1.jpg)
It looks like a good deal but in reality, it doesn't hold much. Needs more smaller/thinner drawers to hold more tools. The deep drawers will cause you to have to dig for tools. It would be good as a secondary box for BIG tools.
Mine is similar and works well for me; however, I don't use the top section as that part is always closed and crap is stacked on top.
Maybe you only have small tools for your factory JK and pretty bike???
Sent from my SM-G930V using Tapatalk
I only have a hammer, crescent wrench, screw driver, duct tape, and WD40. You are probably overcompensating with tools for skills.
-
Hard to beat $478
(https://uploads.tapatalk-cdn.com/20170625/fe237f36b7ef7457b15a74f66769a6c1.jpg)
It looks like a good deal but in reality, it doesn't hold much. Needs more smaller/thinner drawers to hold more tools. The deep drawers will cause you to have to dig for tools. It would be good as a secondary box for BIG tools.
Mine is similar and works well for me; however, I don't use the top section as that part is always closed and crap is stacked on top.
Maybe you only have small tools for your factory JK and pretty bike???
Sent from my SM-G930V using Tapatalk
I only have a hammer, crescent wrench, screw driver, duct tape, and WD40. You are probably overcompensating with tools for skills.
Ah, the JK Fixit-Kit. Very popular setup
-
A 41" wide case with 3 flat drawers is a ton of small space. I see this box set as prefecto for the price. Or you can buy the big Snap On.
-
Snap on //drool//
but this is the truth
-
I don't understand the cost of snap-on tool boxes. What makes them worth $4k? (Based on a Craigslist post I saw one time)
-
What makes ANY snap on tool cost what they do? My buddy owns his own repair shop here and the guy always comes by trying to pander his crap to him. Sorry buddy you are way overpriced.
-
Snap on //drool//
but this is the truth
There is a guy at the Carriage Nissan in Gainesville with a setup almost identical to that, but his kids are grown.
-
Mechanics get 3 things from SnapOn:
1) Truck comes around regularly and has what is needed
2) All tools are guaranteed and are replaced free if broke
3) They can buy on credit and pay off monthly
-
Mechanics get 3 things from SnapOn:
1) Truck comes around regularly and has what is needed
2) All tools are guaranteed and are replaced free if broke
3) They can buy on credit and pay off weekly
FIFY
-
High end tools are usually more refined than store bought stuff. It's the little things, such as more teeth on a ratchet, smoother ratcheting action, better grips, perfect size for the job, and sometimes the correct tool for the job.
I own store bought stuff.
Sent from my SM-G930V using Tapatalk
-
High end tools are usually more refined than store bought stuff. It's the little things, such as more teeth on a ratchet, smoother ratcheting action, better grips, perfect size for the job, and sometimes the correct tool for the job.
I own store bought stuff.
Sent from my SM-G930V using Tapatalk
This. Every play with a snap on ratchet? No comparison. I don't have one but have used them. I would like a few select snap on stuff.
Sent from my SM-G935V using Tapatalk
-
The bigger one I would suggest. Over time you will acquire more tools and run out of space. I need more dividers for the wrenches.
I have 50 pounds in a 10 sack in the garage. Plan to build a work bench with a big box inside of it using angle iron. The U.S. general tool boxes are really nice from harbor freight. Better than the sears, home depot, and lowes stuff. When the car is done it will be a little more organized. (https://uploads.tapatalk-cdn.com/20170629/c92e96523da7dd2ada4a1b773855c1bc.jpg)(https://uploads.tapatalk-cdn.com/20170629/1ac3cd168da78674f23989ca2a2c702f.jpg)(https://uploads.tapatalk-cdn.com/20170629/874d2b909cdb2d4ffa3dde73ed3d4560.jpg)(https://uploads.tapatalk-cdn.com/20170629/003255fcf2749cf4b263a0b4d0c0fc2e.jpg)(https://uploads.tapatalk-cdn.com/20170629/6a8967068b22ff3a040ee9e6efc14ad9.jpg)
Sent from my SM-G935V using Tapatalk
-
The bigger one I would suggest. Over time you will acquire more tools and run out of space. I need more dividers for the wrenches.
I have 50 pounds in a 10 sack in the garage. Plan to build a work bench with a big box inside of it using angle iron. The U.S. general tool boxes are really nice from harbor freight. Better than the sears, home depot, and lowes stuff. When the car is done it will be a little more organized.
Sent from my SM-G935V using Tapatalk
What is better about the harbor fright versus those others you mentioned?
Sent from my SM-G930V using Tapatalk
-
High end tools are usually more refined than store bought stuff. It's the little things, such as more teeth on a ratchet, smoother ratcheting action, better grips, perfect size for the job, and sometimes the correct tool for the job.
I own store bought stuff.
Sent from my SM-G930V using Tapatalk
This. Every play with a snap on ratchet? No comparison. I don't have one but have used them. I would like a few select snap on stuff.
Sent from my SM-G935V using Tapatalk
Exactly. I still have a few SnapOn, Mac, and Matco tools from when I turned wrenches for a living a million years ago. I bought a HF fine tooth short 3/8" ratchet and love it. After using it to install my Metal Cloak armor, the forward/reverse level fell out of it.
-
The bigger one I would suggest. Over time you will acquire more tools and run out of space. I need more dividers for the wrenches.
I have 50 pounds in a 10 sack in the garage. Plan to build a work bench with a big box inside of it using angle iron. The U.S. general tool boxes are really nice from harbor freight. Better than the sears, home depot, and lowes stuff. When the car is done it will be a little more organized.
Sent from my SM-G935V using Tapatalk
What is better about the harbor fright versus those others you mentioned?
Sent from my SM-G930V using Tapatalk
Ignore Don.
They seem to be better constructed. Draws roll real smooth. A lot of positive feedback floating around on them. Heavier construction.
I played with all of them but if I had $1k to spend instead of $500 I would have bought the HF box.
Sent from my SM-G935V using Tapatalk
-
Damn 300 pages
-
Damn 300 pages
And nobody has bought a single thing posted ha ha.
-
Seems that even the folks with the uber sweet home garages and on Garage Journal use the U.S. General with great luck.
-
22k or trade. Dont really know much about those older axles but I know he wheels that thing.
-
My SuburbaMax Guy has another sweet one for sale...
http://www.ebay.com/itm/132244699030?ssPageName=STRK%3AMESELX%3AIT&_trksid=p3984.m1555.l2649
-
My SuburbaMax Guy has another sweet one for sale...
http://www.ebay.com/itm/132244699030?ssPageName=STRK%3AMESELX%3AIT&_trksid=p3984.m1555.l2649
Resisting the urge.
Might be picking up a 2017 Yukon SLT this weekend. It isn't the Denali with the 6.2 but damn nice.
-
My SuburbaMax Guy has another sweet one for sale...
http://www.ebay.com/itm/132244699030?ssPageName=STRK%3AMESELX%3AIT&_trksid=p3984.m1555.l2649
Resisting the urge.
Might be picking up a 2017 Yukon SLT this weekend. It isn't the Denali with the 6.2 but damn nice.
Just dont plan on towing with it.
-
My SuburbaMax Guy has another sweet one for sale...
http://www.ebay.com/itm/132244699030?ssPageName=STRK%3AMESELX%3AIT&_trksid=p3984.m1555.l2649 (http://www.ebay.com/itm/132244699030?ssPageName=STRK%3AMESELX%3AIT&_trksid=p3984.m1555.l2649)
Resisting the urge.
Might be picking up a 2017 Yukon SLT this weekend. It isn't the Denali with the 6.2 but damn nice.
Just dont plan on towing with it.
It will tow my Jeep fine for the 6 times a year that I go.
Sent from my iPhone using Tapatalk
-
My SuburbaMax Guy has another sweet one for sale...
http://www.ebay.com/itm/132244699030?ssPageName=STRK%3AMESELX%3AIT&_trksid=p3984.m1555.l2649
Resisting the urge.
Might be picking up a 2017 Yukon SLT this weekend. It isn't the Denali with the 6.2 but damn nice.
Just dont plan on towing with it.
It will tow my Jeep fine for the 6 times a year or go.
Sent from my iPhone using Tapatalk
Agreed. Several folks, including Doug, use their gasser family haulers to pull their rigs around. I'd get the bigger engine...but it's easy to spend your money.
Sent from my SM-G930V using Tapatalk
-
My SuburbaMax Guy has another sweet one for sale...
http://www.ebay.com/itm/132244699030?ssPageName=STRK%3AMESELX%3AIT&_trksid=p3984.m1555.l2649
Resisting the urge.
Might be picking up a 2017 Yukon SLT this weekend. It isn't the Denali with the 6.2 but damn nice.
Just dont plan on towing with it.
It will tow my Jeep fine for the 6 times a year or go.
Sent from my iPhone using Tapatalk
I couldn't hold 55 on flat ground in FL with my 09 suburban with a head wind pulling the Jeep and it sure sucked when i got to the hills in GA. got 7mpg. It was a turd.
My tahoe did much better even with 250000 miles on it.
-
My SuburbaMax Guy has another sweet one for sale...
http://www.ebay.com/itm/132244699030?ssPageName=STRK%3AMESELX%3AIT&_trksid=p3984.m1555.l2649
Resisting the urge.
Might be picking up a 2017 Yukon SLT this weekend. It isn't the Denali with the 6.2 but damn nice.
Just dont plan on towing with it.
It will tow my Jeep fine for the 6 times a year or go.
Sent from my iPhone using Tapatalk
I couldn't hold 55 on flat ground in FL with my 09 suburban with a head wind pulling the Jeep and it sure sucked when i got to the hills in GA. got 7mpg. It was a turd.
My tahoe did much better even with 250000 miles on it.
I think in general suburbans suck. Heck I bet you could throw a duramax in them and they would still pull worse than a worn out 7.3.
Sent from my iPhone using Tapatalk
-
My SuburbaMax Guy has another sweet one for sale...
http://www.ebay.com/itm/132244699030?ssPageName=STRK%3AMESELX%3AIT&_trksid=p3984.m1555.l2649
Resisting the urge.
Might be picking up a 2017 Yukon SLT this weekend. It isn't the Denali with the 6.2 but damn nice.
Just dont plan on towing with it.
It will tow my Jeep fine for the 6 times a year or go.
Sent from my iPhone using Tapatalk
I couldn't hold 55 on flat ground in FL with my 09 suburban with a head wind pulling the Jeep and it sure sucked when i got to the hills in GA. got 7mpg. It was a turd.
My tahoe did much better even with 250000 miles on it.
I think in general suburbans suck. Heck I bet you could throw a duramax in them and they would still pull worse than a worn out 7.3.
Sent from my iPhone using Tapatalk
It's a 7.3 world. Every other truck is just living in it
Did you know that when a 7.3 gets 500k miles on it that it is just getting broken in? Truth. Saw it on Craigslist.
-
My SuburbaMax Guy has another sweet one for sale...
http://www.ebay.com/itm/132244699030?ssPageName=STRK%3AMESELX%3AIT&_trksid=p3984.m1555.l2649
Resisting the urge.
Might be picking up a 2017 Yukon SLT this weekend. It isn't the Denali with the 6.2 but damn nice.
Just dont plan on towing with it.
It will tow my Jeep fine for the 6 times a year or go.
Sent from my iPhone using Tapatalk
I couldn't hold 55 on flat ground in FL with my 09 suburban with a head wind pulling the Jeep and it sure sucked when i got to the hills in GA. got 7mpg. It was a turd.
My tahoe did much better even with 250000 miles on it.
I think in general suburbans suck. Heck I bet you could throw a duramax in them and they would still pull worse than a worn out 7.3.
Sent from my iPhone using Tapatalk
It's a 7.3 world. Every other truck is just living in it
Did you know that when a 7.3 gets 500k miles on it that it is just getting broken in? Truth. Saw it on Craigslist.
Oh crap tony I completely forgot about the suburbamax.
Sent from my iPhone using Tapatalk
-
My SuburbaMax Guy has another sweet one for sale...
http://www.ebay.com/itm/132244699030?ssPageName=STRK%3AMESELX%3AIT&_trksid=p3984.m1555.l2649
Resisting the urge.
Might be picking up a 2017 Yukon SLT this weekend. It isn't the Denali with the 6.2 but damn nice.
Just dont plan on towing with it.
It will tow my Jeep fine for the 6 times a year or go.
Sent from my iPhone using Tapatalk
I couldn't hold 55 on flat ground in FL with my 09 suburban with a head wind pulling the Jeep and it sure sucked when i got to the hills in GA. got 7mpg. It was a turd.
My tahoe did much better even with 250000 miles on it.
I think in general suburbans suck. Heck I bet you could throw a duramax in them and they would still pull worse than a worn out 7.3.
Sent from my iPhone using Tapatalk
It's a 7.3 world. Every other truck is just living in it
Did you know that when a 7.3 gets 500k miles on it that it is just getting broken in? Truth. Saw it on Craigslist.
TRUTH.
and also, selfless sale plug.... 1997 f350 Crew cab longbed on 37s with fresh motor FOR SALE..... in a couple weeks, when it gets back from the doctor. tell your friends and neighbors.
-
My SuburbaMax Guy has another sweet one for sale...
http://www.ebay.com/itm/132244699030?ssPageName=STRK%3AMESELX%3AIT&_trksid=p3984.m1555.l2649
Resisting the urge.
Might be picking up a 2017 Yukon SLT this weekend. It isn't the Denali with the 6.2 but damn nice.
Just dont plan on towing with it.
It will tow my Jeep fine for the 6 times a year or go.
Sent from my iPhone using Tapatalk
I couldn't hold 55 on flat ground in FL with my 09 suburban with a head wind pulling the Jeep and it sure sucked when i got to the hills in GA. got 7mpg. It was a turd.
My tahoe did much better even with 250000 miles on it.
I think in general suburbans suck. Heck I bet you could throw a duramax in them and they would still pull worse than a worn out 7.3.
Sent from my iPhone using Tapatalk
It's a 7.3 world. Every other truck is just living in it
Did you know that when a 7.3 gets 500k miles on it that it is just getting broken in? Truth. Saw it on Craigslist.
TRUTH.
and also, selfless sale plug.... 1997 f350 Crew cab longbed on 37s with fresh motor FOR SALE..... in a couple weeks, when it gets back from the doctor. tell your friends and neighbors.
Can you PM me price and pics?
got a friend looking
-
https://atlanta.craigslist.org/nat/pts/6205049302.html
PSC ram and tie rod clamp
-
My SuburbaMax Guy has another sweet one for sale...
http://www.ebay.com/itm/132244699030?ssPageName=STRK%3AMESELX%3AIT&_trksid=p3984.m1555.l2649
Resisting the urge.
Might be picking up a 2017 Yukon SLT this weekend. It isn't the Denali with the 6.2 but damn nice.
Just dont plan on towing with it.
It will tow my Jeep fine for the 6 times a year or go.
Sent from my iPhone using Tapatalk
I couldn't hold 55 on flat ground in FL with my 09 suburban with a head wind pulling the Jeep and it sure sucked when i got to the hills in GA. got 7mpg. It was a turd.
My tahoe did much better even with 250000 miles on it.
I think in general suburbans suck. Heck I bet you could throw a duramax in them and they would still pull worse than a worn out 7.3.
Sent from my iPhone using Tapatalk
It's a 7.3 world. Every other truck is just living in it
Did you know that when a 7.3 gets 500k miles on it that it is just getting broken in? Truth. Saw it on Craigslist.
TRUTH.
and also, selfless sale plug.... 1997 f350 Crew cab longbed on 37s with fresh motor FOR SALE..... in a couple weeks, when it gets back from the doctor. tell your friends and neighbors.
Can you PM me price and pics?
got a friend looking
pm sent
-
https://atlanta.craigslist.org/eat/pts/6193701235.html more half doors. rugged ridge hard lowers and soft uppers. these are nice. if I had the cash id buy em in a heart beat.
-
https://atlanta.craigslist.org/eat/pts/6175840964.html
-
Prime day is today, KILLER deal on Ingersoll Rand's 1/2" Impact with battery.. $250
https://www.amazon.com/gp/product/B007LHJI4E/ref=ox_sc_act_title_1?smid=ATVPDKIKX0DER&psc=1
-
I've heard people rave about these. Just ordered one.
https://www.amazon.com/Amazon-Echo-Bluetooth-Speaker-with-Alexa-Black/dp/B00X4WHP5E/ref=gbps_rlm_m-6_f45d_2f5defd8?smid=ATVPDKIKX0DER&pf_rd_p=c624455a-ed52-4f78-9f81-675ed6faf45d&pf_rd_s=merchandised-search-6&pf_rd_t=101&pf_rd_i=13887280011&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=1QAJGSTP9YYJW5S8ZQTV
-
I've heard people rave about these. Just ordered one.
https://www.amazon.com/Amazon-Echo-Bluetooth-Speaker-with-Alexa-Black/dp/B00X4WHP5E/ref=gbps_rlm_m-6_f45d_2f5defd8?smid=ATVPDKIKX0DER&pf_rd_p=c624455a-ed52-4f78-9f81-675ed6faf45d&pf_rd_s=merchandised-search-6&pf_rd_t=101&pf_rd_i=13887280011&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=1QAJGSTP9YYJW5S8ZQTV
Tempting, but I don't like the idea something continuously listening to me.
(Even though my phone and tv probably already do)
-
I've heard people rave about these. Just ordered one.
https://www.amazon.com/Amazon-Echo-Bluetooth-Speaker-with-Alexa-Black/dp/B00X4WHP5E/ref=gbps_rlm_m-6_f45d_2f5defd8?smid=ATVPDKIKX0DER&pf_rd_p=c624455a-ed52-4f78-9f81-675ed6faf45d&pf_rd_s=merchandised-search-6&pf_rd_t=101&pf_rd_i=13887280011&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=1QAJGSTP9YYJW5S8ZQTV
Tempting, but I don't like the idea something continuously listening to me.
(Even though my phone and tv probably already do)
And your wife... ;-)
-
I've heard people rave about these. Just ordered one.
https://www.amazon.com/Amazon-Echo-Bluetooth-Speaker-with-Alexa-Black/dp/B00X4WHP5E/ref=gbps_rlm_m-6_f45d_2f5defd8?smid=ATVPDKIKX0DER&pf_rd_p=c624455a-ed52-4f78-9f81-675ed6faf45d&pf_rd_s=merchandised-search-6&pf_rd_t=101&pf_rd_i=13887280011&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=1QAJGSTP9YYJW5S8ZQTV
Tempting, but I don't like the idea something continuously listening to me.
(Even though my phone and tv probably already do)
And your wife... ;-)
Continuously listening, not continuously talking.
Sent from my SM-G955U using Tapatalk
-
https://atlanta.craigslist.org/nat/pts/6211044508.html rugged ridge half doors. set of 4. He's selling them for 1k. retail for a set of 4 is 2k.
-
https://atlanta.craigslist.org/nat/pts/6211044508.html rugged ridge half doors. set of 4. He's selling them for 1k. retail for a set of 4 is 2k.
Never heard good things about the RR doors.
-
https://atlanta.craigslist.org/nat/pts/6211044508.html rugged ridge half doors. set of 4. He's selling them for 1k. retail for a set of 4 is 2k.
Never heard good things about the RR doors.
Good to know. what have you heard about them?
-
https://atlanta.craigslist.org/nat/pts/6211044508.html rugged ridge half doors. set of 4. He's selling them for 1k. retail for a set of 4 is 2k.
Never heard good things about the RR doors.
Good to know. what have you heard about them?
I'm trying to remember. But I see a lot of them for sale. JKOwners has some threads about them.
-
https://atlanta.craigslist.org/nat/pts/6211044508.html rugged ridge half doors. set of 4. He's selling them for 1k. retail for a set of 4 is 2k.
Never heard good things about the RR doors.
Good to know. what have you heard about them?
Must use their uppers right?
-
Killer cooler deal..
Coleman (Coleman) cooler box party stacker / 25QT gray 3000001328 https://www.amazon.com/dp/B007BBU6K0/ref=cm_sw_r_cp_api_thAzzbQ21CY0E
-
Killer cooler deal..
Coleman (Coleman) cooler box party stacker / 25QT gray 3000001328 https://www.amazon.com/dp/B007BBU6K0/ref=cm_sw_r_cp_api_thAzzbQ21CY0E
Only one left when I looked....
-
Killer cooler deal..
Coleman (Coleman) cooler box party stacker / 25QT gray 3000001328 https://www.amazon.com/dp/B007BBU6K0/ref=cm_sw_r_cp_api_thAzzbQ21CY0E
Only one left when I looked....
Won't last long!
-
Killer cooler deal..
Coleman (Coleman) cooler box party stacker / 25QT gray 3000001328 https://www.amazon.com/dp/B007BBU6K0/ref=cm_sw_r_cp_api_thAzzbQ21CY0E
Only one left when I looked....
and it's in Japan....WTF
-
I've heard people rave about these. Just ordered one.
https://www.amazon.com/Amazon-Echo-Bluetooth-Speaker-with-Alexa-Black/dp/B00X4WHP5E/ref=gbps_rlm_m-6_f45d_2f5defd8?smid=ATVPDKIKX0DER&pf_rd_p=c624455a-ed52-4f78-9f81-675ed6faf45d&pf_rd_s=merchandised-search-6&pf_rd_t=101&pf_rd_i=13887280011&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=1QAJGSTP9YYJW5S8ZQTV
I've had one for about 8 months and absolutely love it. You can actually make calls to friends or family that have an Alexa. I also heard that an Alexa made a 911 call for someone that was in distress! You won't be disappointed.
Sent from my iPad using Tapatalk
-
I've heard people rave about these. Just ordered one.
https://www.amazon.com/Amazon-Echo-Bluetooth-Speaker-with-Alexa-Black/dp/B00X4WHP5E/ref=gbps_rlm_m-6_f45d_2f5defd8?smid=ATVPDKIKX0DER&pf_rd_p=c624455a-ed52-4f78-9f81-675ed6faf45d&pf_rd_s=merchandised-search-6&pf_rd_t=101&pf_rd_i=13887280011&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=1QAJGSTP9YYJW5S8ZQTV
I've had one for about 8 months and absolutely love it. You can actually make calls to friends or family that have an Alexa. I also heard that an Alexa made a 911 call for someone that was in distress! You won't be disappointed.
Sent from my iPad using Tapatalk
Ask it to tell you dirty jokes, "how many miles per gallon will the jeep jl get", "is collusion illegal", "what's the penalty for treason", etc
Sent from my SM-G930V using Tapatalk
-
No way i want anything in the house thst can listen. Lol. Smart tvs, tablets, laptops, more. etc. House is probsbly full of them.
-
I've heard people rave about these. Just ordered one.
https://www.amazon.com/Amazon-Echo-Bluetooth-Speaker-with-Alexa-Black/dp/B00X4WHP5E/ref=gbps_rlm_m-6_f45d_2f5defd8?smid=ATVPDKIKX0DER&pf_rd_p=c624455a-ed52-4f78-9f81-675ed6faf45d&pf_rd_s=merchandised-search-6&pf_rd_t=101&pf_rd_i=13887280011&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=1QAJGSTP9YYJW5S8ZQTV
I've had one for about 8 months and absolutely love it. You can actually make calls to friends or family that have an Alexa. I also heard that an Alexa made a 911 call for someone that was in distress! You won't be disappointed.
Sent from my iPad using Tapatalk
Ask it to tell you dirty jokes, "how many miles per gallon will the jeep jl get", "is collusion illegal", "what's the penalty for treason", etc
Sent from my SM-G930V using Tapatalk
Lol painful huh
-
I've heard people rave about these. Just ordered one.
https://www.amazon.com/Amazon-Echo-Bluetooth-Speaker-with-Alexa-Black/dp/B00X4WHP5E/ref=gbps_rlm_m-6_f45d_2f5defd8?smid=ATVPDKIKX0DER&pf_rd_p=c624455a-ed52-4f78-9f81-675ed6faf45d&pf_rd_s=merchandised-search-6&pf_rd_t=101&pf_rd_i=13887280011&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=1QAJGSTP9YYJW5S8ZQTV
I've had one for about 8 months and absolutely love it. You can actually make calls to friends or family that have an Alexa. I also heard that an Alexa made a 911 call for someone that was in distress! You won't be disappointed.
Sent from my iPad using Tapatalk
Ask it to tell you dirty jokes, "how many miles per gallon will the jeep jl get", "is collusion illegal", "what's the penalty for treason", etc
Sent from my SM-G930V using Tapatalk
The butt hurt is real
Reasonable questions in modern times... laughter, fuel mileage, facts, Wikileaks, a certain president and their family, etc
-
It worked for Bezos
-
Lowest quality they offer but a smoking deal for tool storage for the garage.
On sale for $154.89 for the pair.
http://www.sears.com/craftsman-26inch-wide-7-drawer-homeowner-top-chest/p-00940758000P
http://www.sears.com/craftsman-edge-series-26inch-wide-5-drawer-homeowner/p-00904076000P
(http://c.shld.net/rpx/i/s/i/spin/image/spin_prod_894349412?&hei=2000&wid=2000&op_sharpen=1)
-
Deal right there Doug. It might be low quality in some areas but it's all I need!
-
Lowest quality they offer but a smoking deal for tool storage for the garage.
On sale for $154.89 for the pair.
http://www.sears.com/craftsman-26inch-wide-7-drawer-homeowner-top-chest/p-00940758000P
http://www.sears.com/craftsman-edge-series-26inch-wide-5-drawer-homeowner/p-00904076000P
(http://c.shld.net/rpx/i/s/i/spin/image/spin_prod_894349412?&hei=2000&wid=2000&op_sharpen=1)
I've been using that same top box for about 25+ years. Bought it when I sold my Mac boxes.
-
2 hours remaining as
$99
https://www.amazon.com/gp/aw/d/B01MQ6EPQU?ref_=ox_sc_act_image_1&smid=A2QRRWZZ5QTWJX&psc=1&pldnSite=1
-
Deal right there Doug. It might be low quality in some areas but it's all I need!
Did you buy it?
-
No. I'm too poor...
Sent from my SM-G955U using Tapatalk
-
2 hours remaining as
$99
https://www.amazon.com/gp/aw/d/B01MQ6EPQU?ref_=ox_sc_act_image_1&smid=A2QRRWZZ5QTWJX&psc=1&pldnSite=1
Thanks. Got one on the way.
-
Lowest quality they offer but a smoking deal for tool storage for the garage.
On sale for $154.89 for the pair.
http://www.sears.com/craftsman-26inch-wide-7-drawer-homeowner-top-chest/p-00940758000P
http://www.sears.com/craftsman-edge-series-26inch-wide-5-drawer-homeowner/p-00904076000P
(http://c.shld.net/rpx/i/s/i/spin/image/spin_prod_894349412?&hei=2000&wid=2000&op_sharpen=1)
I think this is the box I have. It was a gift from Hayden a few years ago. I love it. Very useful and works perfect for me. No idea what he laid but that sales price is a deal for what you get.
-
2 hours remaining as
$99
https://www.amazon.com/gp/aw/d/B01MQ6EPQU?ref_=ox_sc_act_image_1&smid=A2QRRWZZ5QTWJX&psc=1&pldnSite=1
Damn I miss this I'm wanting to get rid of cable!!
Sent from my iPhone using Tapatalk
-
2 hours remaining as
$99
https://www.amazon.com/gp/aw/d/B01MQ6EPQU?ref_=ox_sc_act_image_1&smid=A2QRRWZZ5QTWJX&psc=1&pldnSite=1
Damn I miss this I'm wanting to get rid of cable!!
Sent from my iPhone using Tapatalk
I have my old red...err....pink one I'll sell for $50.
-
https://atlanta.craigslist.org/atl/pts/d/jeep-wrangler-jk-strike/6219465831.html strike force zebra doors. comes with door hangers for garage wall and comes with carrying pack. These doors are top notch.
-
https://atlanta.craigslist.org/atl/pts/d/jeep-wrangler-jk-strike/6219465831.html strike force zebra doors. comes with door hangers for garage wall and comes with carrying pack. These doors are top notch.
You've been searching doors a lot. What are you looking for?
-
https://atlanta.craigslist.org/atl/pts/d/jeep-wrangler-jk-strike/6219465831.html strike force zebra doors. comes with door hangers for garage wall and comes with carrying pack. These doors are top notch.
You've been searching doors a lot. What are you looking for?
I just search for anything jeep on craigslist and the only decent/cool things I have found recently are half doors. Everything else is all stock takeoffs. I do want half doors but don't have the funds for them. Im about to replace my tie rod ends and draglink and wheel speed sensors and that will take my funds away from mods. Thought id share the finds on here
-
https://atlanta.craigslist.org/atl/pts/d/jeep-wrangler-jk-strike/6219465831.html strike force zebra doors. comes with door hangers for garage wall and comes with carrying pack. These doors are top notch.
You've been searching doors a lot. What are you looking for?
I just search for anything jeep on craigslist and the only decent/cool things I have found recently are half doors. Everything else is all stock takeoffs. I do want half doors but don't have the funds for them. Im about to replace my tie rod ends and draglink and wheel speed sensors and that will take my funds away from mods. Thought id share the finds on here
I was just curious. Keep sharing the deals!
-
Some crazy stuff going on here
https://atlanta.craigslist.org/eat/cto/6207591573.html
-
Some crazy stuff going on here
https://atlanta.craigslist.org/eat/cto/6207591573.html
WJM
Sent from my iPhone using Tapatalk
-
Not impressed.
First off its a CJ5. Hell no.
It has 1/2 ton axles. No.
Almost $9k. No.
-
Triangulation? Front bumper?
-
It may have it but still not my cup of brewski.
-
Dave's Customs (the place that made my boat sides) is having a 25% off sale today if anyone is interested.
https://davescustomsunlimited.com/jeep-tj-lj-extended-boat-side-rocker-panels/ (https://davescustomsunlimited.com/jeep-tj-lj-extended-boat-side-rocker-panels/)
-
https://atlanta.craigslist.org/sat/cto/d/ford-truck-rat-rod-lowered/6237543371.html
-
^^^^ bad A! Good deal here.
-
This is NOT a good deal, but I am oddly aroused by it. :)
http://www.hardlinecrawlers.com/forums/index.php?topic=56778.0
-
This is NOT a good deal, but I am oddly aroused by it. :)
http://www.hardlinecrawlers.com/forums/index.php?topic=56778.0
I saw that last week as well. Agree, not a good deal...but damn it's clean
-
This is NOT a good deal, but I am oddly aroused by it. :)
http://www.hardlinecrawlers.com/forums/index.php?topic=56778.0
I saw that last week as well. Agree, not a good deal...but damn it's clean
They guy is high on something besides the price.
-
Clean, but damn
-
4WD hardware has a pretty good deal going on. Last day is today. 10% off nearly everything with promo code BRANDSMPQ9S3&, free shipping over $50, and they pay the sales tax.
Sent from my iPhone using Tapatalk Pro
-
This is NOT a good deal, but I am oddly aroused by it. :)
http://www.hardlinecrawlers.com/forums/index.php?topic=56778.0
I like the built up 07 2 door Rubicon on HL for $25k.
-
looks interesting like some good prices for bumpers and fenders. Tempted myself
https://atlanta.craigslist.org/nat/pts/d/jeep-jk-aluminum-bumpers/6244334645.html
-
This is NOT a good deal, but I am oddly aroused by it. :)
http://www.hardlinecrawlers.com/forums/index.php?topic=56778.0
Damn, nothing like dogging the guy's ad. LOL
-
Been looking at the junk on HLC. $10,500
http://www.hardlinecrawlers.com/forums/index.php?topic=55300.0
-
This is NOT a good deal, but I am oddly aroused by it. :)
http://www.hardlinecrawlers.com/forums/index.php?topic=56778.0
Damn, nothing like dogging the guy's ad. LOL
Hardline is a tough place to hang. They show no mercy
-
Seems like a win in my book. Anybody know the engines in these? https://atlanta.craigslist.org/atl/cto/d/94-turbo-diesel-suburban-4-4/6238516295.html
-
Either a 6.2 or 6.5. Both are dogs, so I hear. A test drive would clear that up.
-
Seems like a win in my book. Anybody know the engines in these? https://atlanta.craigslist.org/atl/cto/d/94-turbo-diesel-suburban-4-4/6238516295.html
6.5
http://www.trucktrend.com/cool-trucks/1107dp-end-of-an-era-1994-chevy-suburban/
Sent from my iPhone using Tapatalk
-
Had an 88 sub with the 6.2. Great mileage, crappy tower.
Sent from my SM-G955U using Tapatalk
-
The 6.5 is pretty bad for power too. Not like a NA 6.2 but still slow, noisy, etc. A small block gas would out pull it.
-
My 6.2 was a great engine for daily driving. 17mpg around town, 23 on the highway. I drove from winder to pittsburg PA and still had gas in the tank. But towing anything was a real chore. Flat ground, ok. Hills, forget it!
Sent from my SM-G955U using Tapatalk
-
No power. Helped a buddy pull a loaded closed trailer from North Dakota back here and we barely pulled the hills. Rode bad too.
-
Mine rode like a caddy. Both my old subs ride better than most trucks on the road now.
Sent from my SM-G955U using Tapatalk
-
Mine rode like a caddy. Both my old subs ride better than most trucks on the road now.
Sent from my SM-G955U using Tapatalk
Any of yours 4wd solid axle leaf springs?
-
No, 2wd. But have ridden in stock 4xs from the era. Still a pretty good ride.
Sent from my SM-G955U using Tapatalk
-
That 94' should be ifs
-
That 94' should be ifs
Danny is correct.
-
That 94' should be ifs
Danny is correct.
I confirm this to be accurate.
Sent from my SM-G930V using Tapatalk
-
http://www.ebay.com/itm/1980-Replica-Kit-Makes-/282595374542?hash=item41cbff35ce:g:JHIAAOSwGzxZgRzq&vxp=mtr
-
Been looking at the junk on HLC. $10,500
http://www.hardlinecrawlers.com/forums/index.php?topic=55300.0
I don't have an account on HL. Can someone shoot him my number? I may have a friend that is interested. 404-732-8274
-
Been looking at the junk on HLC. $10,500
http://www.hardlinecrawlers.com/forums/index.php?topic=55300.0
I don't have an account on HL. Can someone shoot him my number? I may have a friend that is interested. 404-732-8274
Done
Sent from my SM-G930V using Tapatalk
-
Great deal for sure.
-
M&P Shield 9mm for $298
https://www.sportsmansoutdoorsuperstore.com/products2.cfm/ID/147435
Sent from my iPhone using Tapatalk
-
M&P Shield 9mm for $298
https://www.sportsmansoutdoorsuperstore.com/products2.cfm/ID/147435
Sent from my iPhone using Tapatalk
Good deal. I have the M&P 9C and love it. 13 round capacity sold me.
-
Not sure if it's a good deal, but it's a pretty damn sweet Defender 2A.
https://atlanta.craigslist.org/nat/cto/d/1969-land-rover-defender-2a/6265271042.html
-
16-Piece Metric 12-Point Combination Ratcheting Wrench Set - 9416
FREE 13-Piece SAE Combo Wrench Set - 9312
http://www.sears.com/gearwrench-kdt9416d-16-pc-metric-combination-ratcheting-gearwrench/p-SPM11364620830?plpSellerId=Mechanics%20Tools%20Warehouse&prdNo=4&blockNo=4&blockType=G4
(http://c.shld.net/rpx/i/s/i/mp/10148030/prod_7912084330?hei=499&wid=499&op_sharpen=1)
-
16-Piece Metric 12-Point Combination Ratcheting Wrench Set - 9416
FREE 13-Piece SAE Combo Wrench Set - 9312
http://www.sears.com/gearwrench-kdt9416d-16-pc-metric-combination-ratcheting-gearwrench/p-SPM11364620830?plpSellerId=Mechanics%20Tools%20Warehouse&prdNo=4&blockNo=4&blockType=G4
(http://c.shld.net/rpx/i/s/i/mp/10148030/prod_7912084330?hei=499&wid=499&op_sharpen=1)
(https://uploads.tapatalk-cdn.com/20170823/e060dd6d1083757c98c4aade563082f3.jpg)
-
Mo betta
-
there is always this JKU for someone
https://atlanta.craigslist.org/nat/cto/d/fully-custom-built-monster/6273750698.html
-
there is always this JKU for someone
https://atlanta.craigslist.org/nat/cto/d/fully-custom-built-monster/6273750698.html
man, I've been looking for a place to mount a lower light bar. That's perfect!
-
there is always this JKU for someone
https://atlanta.craigslist.org/nat/cto/d/fully-custom-built-monster/6273750698.html
I need bleach for my eyes after looking at that POS.
-
??????
http://www.hardlinecrawlers.com/forums/index.php?topic=56948.0
-
Such a great deal (ask me how I know //::)// )
https://atlanta.craigslist.org/nat/wto/d/continental-dws-tires-and/6281088619.html
-
Don't forget to present the ad to get that price!
http://www.palmerdodgegeorgia.com/new/Jeep/2017-Jeep-Wrangler+Unlimited-Roswell-GA-16d3f2b60a0e0ae71e083f960793ffa7.htm
-
Don't forget to present the ad to get that price!
http://www.palmerdodgegeorgia.com/new/Jeep/2017-Jeep-Wrangler+Unlimited-Roswell-GA-16d3f2b60a0e0ae71e083f960793ffa7.htm
What specifically are we supposed to be buying? Pacifica?
Sent from my SM-G930V using Tapatalk
-
Don't forget to present the ad to get that price!
http://www.palmerdodgegeorgia.com/new/Jeep/2017-Jeep-Wrangler+Unlimited-Roswell-GA-16d3f2b60a0e0ae71e083f960793ffa7.htm
What specifically are we supposed to be buying? Pacifica?
Sent from my SM-G930V using Tapatalk
The link used to go to a 4 door jeep for $66k. Not sure it had much other than bumpers, a lift, and 20" bro wheels with 35s
-
Don't forget to present the ad to get that price!
http://www.palmerdodgegeorgia.com/new/Jeep/2017-Jeep-Wrangler+Unlimited-Roswell-GA-16d3f2b60a0e0ae71e083f960793ffa7.htm
What specifically are we supposed to be buying? Pacifica?
Sent from my SM-G930V using Tapatalk
The link used to go to a 4 door jeep for $66k. Not sure it had much other than bumpers, a lift, and 20" bro wheels with 35s
LOL, they sold it. Try this one. Hurry, seems like they are selling like hotcakes.
http://www.palmerdodgegeorgia.com/exotic-new/Jeep/2017-Jeep-Wrangler+Unlimited-Roswell-GA-a5908b4b0a0e0ae712ca3d214ba071d3.htm
-
Don't forget the smittybilt winch hooked to the d ring mounts on the bumper.
Sent from my iPhone using Tapatalk
-
Don't forget to present the ad to get that price!
http://www.palmerdodgegeorgia.com/new/Jeep/2017-Jeep-Wrangler+Unlimited-Roswell-GA-16d3f2b60a0e0ae71e083f960793ffa7.htm
What specifically are we supposed to be buying? Pacifica?
Sent from my SM-G930V using Tapatalk
The link used to go to a 4 door jeep for $66k. Not sure it had much other than bumpers, a lift, and 20" bro wheels with 35s
LOL, they sold it. Try this one. Hurry, seems like they are selling like hotcakes.
http://www.palmerdodgegeorgia.com/exotic-new/Jeep/2017-Jeep-Wrangler+Unlimited-Roswell-GA-a5908b4b0a0e0ae712ca3d214ba071d3.htm
Besides the color, it's a nice jeep...for a four door! Nicely setup, for sure.
Sent from my SM-G930V using Tapatalk
-
Don't forget the smittybilt winch hooked to the d ring mounts on the bumper.
Sent from my iPhone using Tapatalk
It's a zeon
Sent from my SM-G930V using Tapatalk
-
20mpg???????????????????
-
Don't forget the smittybilt winch hooked to the d ring mounts on the bumper.
Sent from my iPhone using Tapatalk
It's a zeon
Sent from my SM-G930V using Tapatalk
The Jeep I was linked to had a smittybilt. Can't find it on their site anymore.
Sent from my iPhone using Tapatalk
-
The Go kart was such a hit that some of my fraternity brothers want to go in together on a Beater Jeep. Figured we could offer 400ish.
https://spacecoast.craigslist.org/cto/d/2001-grand-cherokee/6282969747.html
-
The Go kart was such a hit that some of my fraternity brothers want to go in together on a Beater Jeep. Figured we could offer 400ish.
https://spacecoast.craigslist.org/cto/d/2001-grand-cherokee/6282969747.html
Shouldn't y'all be chasing tail and studying?
-
The Go kart was such a hit that some of my fraternity brothers want to go in together on a Beater Jeep. Figured we could offer 400ish.
https://spacecoast.craigslist.org/cto/d/2001-grand-cherokee/6282969747.html
sounds like it needs a transmission or a rebuild?
-
The Go kart was such a hit that some of my fraternity brothers want to go in together on a Beater Jeep. Figured we could offer 400ish.
https://spacecoast.craigslist.org/cto/d/2001-grand-cherokee/6282969747.html
sounds like it needs a transmission or a rebuild?
Ya not sure about that. gonna look at It on Saturday.
-
The Go kart was such a hit that some of my fraternity brothers want to go in together on a Beater Jeep. Figured we could offer 400ish.
https://spacecoast.craigslist.org/cto/d/2001-grand-cherokee/6282969747.html
sounds like it needs a transmission or a rebuild?
Pull a Part
-
The Go kart was such a hit that some of my fraternity brothers want to go in together on a Beater Jeep. Figured we could offer 400ish.
https://spacecoast.craigslist.org/cto/d/2001-grand-cherokee/6282969747.html
Shouldn't y'all be chasing tail and studying?
Maybe they are going after the Mud crickets?
-
The Go kart was such a hit that some of my fraternity brothers want to go in together on a Beater Jeep. Figured we could offer 400ish.
https://spacecoast.craigslist.org/cto/d/2001-grand-cherokee/6282969747.html
sounds like it needs a transmission or a rebuild?
Pull a Part
I've got a good parts XJ.
-
I've never heard of a AW4 swap in a WJ but it would make sense. I do know that the ZJ came with a AW4 for one year.
They are bullet proof transmissions. My reverse sometimes doesn't want to cooperate but never had a problem with forward gears, 270k pampered miles.
-
Owner said the trans and everything is all in and driving. Pretty cool
-
MasterPull winch line is having a 20% off Labor Day sale going on...use code LABORDAY at checkout.
-
VKS is Having a Labor Day Sale "LD17" 15% off
-
2012 JEEP WRANGLER UNLIMITED SPORT
93K MILES. NO ACCIDENTS AND CLEAN CARFAX.
THIS JEEP HAS NOT BEEN WHEELED. JUST HIGHWAY USE, READY TO BE WHEELED
FRONT AXLE - DANA 30
REAR AXLE - DANA 44
BOTH AXLES ARE BOMB PROOF TO RUN THE 38" TIRES.
I DONT THINK IM MISSING ANYTHING.
$36,000 OBO
https://atlanta.craigslist.org/atl/cto/d/2012-jeep-wrangler-unlimited/6254064001.html
(https://images.craigslist.org/00f0f_gWVBGVZM4yK_1200x900.jpg)
-
Do it! @Doug ....its bombproof!
-
Low miles, Dana 30 on 38s & only $36k. What a deal!!!!
-
bombproof 30... //popcorn//
-
Turns out that is the guy who bought my antirock. I remember him telling me about how he beats the hell out of his jeep and goes offroad all the time. His tires didn't even have a single cut or chunk out of them.
-
Turns out that is the guy who bought my antirock. I remember him telling me about how he beats the hell out of his jeep and goes offroad all the time. His tires didn't even have a single cut or chunk out of them.
What if he has two sets of tires. Like a street set and a sticky set?
-
Turns out that is the guy who bought my antirock. I remember him telling me about how he beats the hell out of his jeep and goes offroad all the time. His tires didn't even have a single cut or chunk out of them.
What if he has two sets of tires. Like a street set and a sticky set?
Who would do that? are you Puddin' me on?
-
Turns out that is the guy who bought my antirock. I remember him telling me about how he beats the hell out of his jeep and goes offroad all the time. His tires didn't even have a single cut or chunk out of them.
What if he has two sets of tires. Like a street set and a sticky set?
Who would do that? are you Puddin' me on?
(https://uploads.tapatalk-cdn.com/20170907/7e8e5dcff9d6eda3fcbd865bfa1ecc5a.jpeg)
Sent from my iPhone using Tapatalk
-
Turns out that is the guy who bought my antirock. I remember him telling me about how he beats the hell out of his jeep and goes offroad all the time. His tires didn't even have a single cut or chunk out of them.
What if he has two sets of tires. Like a street set and a sticky set?
Sorry but you lose on this one. Guys with "bulletproofed" dana 30's don't have a sticky set of tires.
-
Turns out that is the guy who bought my antirock. I remember him telling me about how he beats the hell out of his jeep and goes offroad all the time. His tires didn't even have a single cut or chunk out of them.
What if he has two sets of tires. Like a street set and a sticky set?
Sorry but you lose on this one. Guys with "bulletproofed" dana 30's don't have a sticky set of tires.
They also shouldn't have 38s
-
Turns out that is the guy who bought my antirock. I remember him telling me about how he beats the hell out of his jeep and goes offroad all the time. His tires didn't even have a single cut or chunk out of them.
What if he has two sets of tires. Like a street set and a sticky set?
Sorry but you lose on this one. Guys with "bulletproofed" dana 30's don't have a sticky set of tires.
They also shouldn't have 38s
agreed
-
Turns out that is the guy who bought my antirock. I remember him telling me about how he beats the hell out of his jeep and goes offroad all the time. His tires didn't even have a single cut or chunk out of them.
What if he has two sets of tires. Like a street set and a sticky set?
Sorry but you lose on this one. Guys with "bulletproofed" dana 30's don't have a sticky set of tires.
They also shouldn't have 38s
agreed
Guys who have armorall on their tires don't wheel.
-
Turns out that is the guy who bought my antirock. I remember him telling me about how he beats the hell out of his jeep and goes offroad all the time. His tires didn't even have a single cut or chunk out of them.
What if he has two sets of tires. Like a street set and a sticky set?
Who would do that? are you Puddin' me on?
Internet winner of the day...good job, Jimbo!
Sent from my SM-G930V using Tapatalk
-
Turns out that is the guy who bought my antirock. I remember him telling me about how he beats the hell out of his jeep and goes offroad all the time. His tires didn't even have a single cut or chunk out of them.
What if he has two sets of tires. Like a street set and a sticky set?
Sorry but you lose on this one. Guys with "bulletproofed" dana 30's don't have a sticky set of tires.
They also shouldn't have 38s
agreed
Guys who have armorall on their tires don't wheel.
Ouch!!! This hurts a little!!
Sent from my iPhone using Tapatalk
-
Damn(https://uploads.tapatalk-cdn.com/20170911/39d243fae7658e1d8986a489c4d511a4.jpg)
-
Damn(https://uploads.tapatalk-cdn.com/20170911/39d243fae7658e1d8986a489c4d511a4.jpg)
that guy needs to learn how to use punctuation.
-
Damn(https://uploads.tapatalk-cdn.com/20170911/39d243fae7658e1d8986a489c4d511a4.jpg)
that guy needs to learn how to use punctuation.
Makes you wonder if he can do math and the quality of the build as well. Not joking. Might be cheap on the front end and then have to put a ton of money in it fixing the redneck engineering.
-
Damn(https://uploads.tapatalk-cdn.com/20170911/39d243fae7658e1d8986a489c4d511a4.jpg)
that guy needs to learn how to use punctuation.
Makes you wonder if he can do math and the quality of the build as well. Not joking. Might be cheap on the front end and then have to put a ton of money in it fixing the redneck engineering.
It reads like it was a bulleted list, then copying and pasting put it all in one paragraph
-
Agree it's a deal?
-
Full metalcloaked 2door. Low miles.
https://stillwater.craigslist.org/cto/d/2013-jk-wrangler-rubicon/6313850584.html
-
Full metalcloaked 2door. Low miles.
https://stillwater.craigslist.org/cto/d/2013-jk-wrangler-rubicon/6313850584.html
Saw that posted a few weeks back. Apparently the guy that built it died and left it to his kids and they're selling it.
Sent from my iPhone using Tapatalk
-
Full metalcloaked 2door. Low miles.
https://stillwater.craigslist.org/cto/d/2013-jk-wrangler-rubicon/6313850584.html
Saw that posted a few weeks back. Apparently the guy that built it died and left it to his kids and they're selling it.
Sent from my iPhone using Tapatalk
How is that a good deal?
-
Its a 2 door!!
-
When he first posted this his original price was $26k. I wanted to offer him $20k. Glad I didn't!
http://www.hardlinecrawlers.com/forums/index.php?topic=56786.0
-
ready to wheel hard.
https://atlanta.craigslist.org/wat/cto/d/1-ton-jeep-wrangler/6314067289.html
-
ready to wheel hard.
https://atlanta.craigslist.org/wat/cto/d/1-ton-jeep-wrangler/6314067289.html
If only it were an LJ, right Tony!
Sent from my SM-G930V using Tapatalk
-
ready to wheel hard.
https://atlanta.craigslist.org/wat/cto/d/1-ton-jeep-wrangler/6314067289.html
Good deal
-
ready to wheel hard.
https://atlanta.craigslist.org/wat/cto/d/1-ton-jeep-wrangler/6314067289.html
If only it were an LJ, right Tony!
Sent from my SM-G930V using Tapatalk
truth
-
(https://uploads.tapatalk-cdn.com/20170927/176ce220d848d381292fdcfee7c91a0e.jpg)
Sent from my SM-G955U using Tapatalk
-
Dems is some nice seat.
-
(https://uploads.tapatalk-cdn.com/20170927/176ce220d848d381292fdcfee7c91a0e.jpg)
Sent from my SM-G955U using Tapatalk
Reasonable deal on those seats as they come with brackets and harnesses. They also look like they are in great shape
Note though that they are the Corbeau's ethridge bigger side bolster. Try them out first. That tall bolster keeps you in the seat nice and tight but can be a ball knocker getting in and out.
-
(https://uploads.tapatalk-cdn.com/20170929/a4deb021d89022657229bfec5f3afd83.png)
LJ!!!!!
Sent from my iPhone using Tapatalk
-
^^^ That's my unicorn. ^^^
-
By no means a deal, if it were half this price then game on...
Oh. but look at that stance...
https://www.rockcrawlersforsale.com/autos/buggy/2-seater/2017-m-m-off-road-1577.html
-
By no means a deal, if it were half this price then game on...
Oh. but look at that stance...
https://www.rockcrawlersforsale.com/autos/buggy/2-seater/2017-m-m-off-road-1577.html
I like it...a bunch, but too rich for me. @Doug
Sent from my SM-G930V using Tapatalk
-
By no means a deal, if it were half this price then game on...
Oh. but look at that stance...
https://www.rockcrawlersforsale.com/autos/buggy/2-seater/2017-m-m-off-road-1577.html
That's probably about right for it. There is a lot of time wrapped around these build and where to put things. It's beyond time consuming.
Tribe 4x4 posted hours they had in their last ifs 4400 ultra 4 car at 1085 hours. When adding parts to the labor it adds up.
Sent from my SM-G935V using Tapatalk
-
http://www.hardlinecrawlers.com/forums/index.php?topic=57332.0
-
RTIC Coolers and Tumblers on sale
https://www.rticcoolers.com/shop/coolers/softpak/RTIC-SoftPak-20-Grey
https://www.rticcoolers.com/shop/drinkware/tumblers/RTIC-Tumbler-30-oz
-
RTIC Coolers and Tumblers on sale
https://www.rticcoolers.com/shop/coolers/softpak/RTIC-SoftPak-20-Grey
https://www.rticcoolers.com/shop/drinkware/tumblers/RTIC-Tumbler-30-oz
Thanks @Doug i picked up a softpak 40 which is also on sale.
-
the softpack 40 is a Deal.
-
Received this in email this morning from RTIC on other items:
"45% Off Certain Cases of Drinkware - 33% Off Individual Tumblers & Bottles ( Stainless Steel Only, Excludes Colors) - 33% Off 17oz & 25oz Water Bottles (All Colors) - 25% Off Soft Sided Coolers (Blue & Grey Combo Only) - While Supplies Last - Subject to Change Without Notice. "
I got the same thing, so I ordered another soft 30.
Sent from my SM-G930V using Tapatalk
-
Received this in email this morning from RTIC on other items:
"45% Off Certain Cases of Drinkware - 33% Off Individual Tumblers & Bottles ( Stainless Steel Only, Excludes Colors) - 33% Off 17oz & 25oz Water Bottles (All Colors) - 25% Off Soft Sided Coolers (Blue & Grey Combo Only) - While Supplies Last - Subject to Change Without Notice. "
I got the same thing, so I ordered another soft 30.
Sent from my SM-G930V using Tapatalk
Same. I have the 20 and as soon as it came in the mail last year I realized I should have got the 30.
Fixed that with this sale.
-
https://goo.gl/YBGwuE
$101 PRIME!
Synthetic Winch Rope Winch Line Cable
20500LBs
Protective Sleeve
95ft x 3/8"
(https://images-na.ssl-images-amazon.com/images/I/71dw-YZxmBL._SL1000_.jpg)
-
RTIC Coolers and Tumblers on sale
https://www.rticcoolers.com/shop/coolers/softpak/RTIC-SoftPak-20-Grey
https://www.rticcoolers.com/shop/drinkware/tumblers/RTIC-Tumbler-30-oz
Thanks @Doug i picked up a softpak 40 which is also on sale.
So a 20 is too small...
a 30 for a day trip?
40 for a few days, and the boat?
-
I picked up a soft-side 30 as well. Thanks for the heads-up!
-
RTIC Coolers and Tumblers on sale
https://www.rticcoolers.com/shop/coolers/softpak/RTIC-SoftPak-20-Grey
https://www.rticcoolers.com/shop/drinkware/tumblers/RTIC-Tumbler-30-oz
Thanks @Doug i picked up a softpak 40 which is also on sale.
So a 20 is too small...
a 30 for a day trip?
40 for a few days, and the boat?
I think a 30 is too small for two people for a day if ice is used.
Sent from my iPhone using Tapatalk
-
Is it me or is this a super steal?
https://www.facebook.com/marketplace/item/115780082476383
Nicely built custom rock buggy. Contact for Specifics and build pictures. Would consider trades and will entertain respectful offers.
3 linked front and rear
Turnkey Engine supply ls 5.3 w/ 3qrt accusump
th400 transmission
4:1 built dana 300
1350 ujoints
PSC Double Ended Ram
39" Krawlers
Walker evans beadlocks
Dynatrac prorock 60 front
Dynatrac prorock 60 FF rear w/ 14 bolt hubs
4:88 gears
ARB Lockers front and rear
CTM Joints
Rear suck down winch
Fox air shocks
suspension seats
5 point harness
Dual brake peddles
Vision X rock lights
Mojave heater
Wheel base: 109"
It hasn't been on many rides but does have some rock rash and has been used for what it was built for. The Buggy is located in Gainesville, GA.
(https://uploads.tapatalk-cdn.com/20171012/fa729f6f2769ef09925031973237092f.jpg)(https://uploads.tapatalk-cdn.com/20171012/9213bb0e7797a8d3ae8b7124bf3827b6.jpg)(https://uploads.tapatalk-cdn.com/20171012/5bafad6ecea6442eeb5f1b216de0b167.jpg)
-
Thats like 12-15k in axles alone.
-
Is it me or is this a super steal?
https://www.facebook.com/marketplace/item/115780082476383
Nicely built custom rock buggy. Contact for Specifics and build pictures. Would consider trades and will entertain respectful offers.
3 linked front and rear
Turnkey Engine supply ls 5.3 w/ 3qrt accusump
th400 transmission
4:1 built dana 300
1350 ujoints
PSC Double Ended Ram
39" Krawlers
Walker evans beadlocks
Dynatrac prorock 60 front
Dynatrac prorock 60 FF rear w/ 14 bolt hubs
4:88 gears
ARB Lockers front and rear
CTM Joints
Rear suck down winch
Fox air shocks
suspension seats
5 point harness
Dual brake peddles
Vision X rock lights
Mojave heater
Wheel base: 109"
It hasn't been on many rides but does have some rock rash and has been used for what it was built for. The Buggy is located in Gainesville, GA.
(https://uploads.tapatalk-cdn.com/20171012/fa729f6f2769ef09925031973237092f.jpg)(https://uploads.tapatalk-cdn.com/20171012/9213bb0e7797a8d3ae8b7124bf3827b6.jpg)(https://uploads.tapatalk-cdn.com/20171012/5bafad6ecea6442eeb5f1b216de0b167.jpg)
Buy it. Tyler would like to get rid of it. The pictures are from when Scott built it.
It does not look that good anymore. Plus it has sat outside untouched for a couple years.
-
https://goo.gl/YBGwuE
$101 PRIME!
Synthetic Winch Rope Winch Line Cable
20500LBs
Protective Sleeve
95ft x 3/8"
(https://images-na.ssl-images-amazon.com/images/I/71dw-YZxmBL._SL1000_.jpg)
I have one of these on the way to replace my current rope on the jeep.
-
Hrmm......
http://www.kikoauctions.com/?nav=auctions&details=7990
-
Hrmm......
http://www.kikoauctions.com/?nav=auctions&details=7990
15% buyers premium wow that's a high one
-
Uh hmmm
(https://uploads.tapatalk-cdn.com/20171012/fc594f9ddc527e1994b999b1c9e28fd8.jpg)
-
Uh hmmm
(https://uploads.tapatalk-cdn.com/20171012/fc594f9ddc527e1994b999b1c9e28fd8.jpg)
Seems like buying a flood damaged vehicle wouldn't be a good idea, unless I'm way wrong, then please enlighten me.
Sent from my iPhone using Tapatalk
-
Uh hmmm
(https://uploads.tapatalk-cdn.com/20171012/fc594f9ddc527e1994b999b1c9e28fd8.jpg)
Seems like buying a flood damaged vehicle wouldn't be a good idea, unless I'm way wrong, then please enlighten me.
Sent from my iPhone using Tapatalk
I agree, you couldn't give me a flooded vehicle. Want nothing to do with it.
-
No telling where these are going to end up, used cars, used parts,
JK half doors....
-
Price is right
(https://uploads.tapatalk-cdn.com/20171018/0d838a07cccaff234aea0f103023a592.jpg)(https://uploads.tapatalk-cdn.com/20171018/71815f3e0c6e9634ce2f6f79afe37071.jpg)
-
^^what am I missing? Looks too good to me true.
-
Not bad other than the t case. But at least its gear driven.
-
Not bad other than the t case. But at least its gear driven.
Gear driven time bomb. Still pretty dang good price on the jeep.
-
Not bad other than the t case. But at least its gear driven.
Gear driven time bomb. Still pretty dang good price on the jeep.
I thought the 20 was pretty robust, just crappy 2:1 gears? (Teralow gears can get you to 3.15:1, I think)
-
Not bad other than the t case. But at least its gear driven.
Gear driven time bomb. Still pretty dang good price on the jeep.
I thought the 20 was pretty robust, just crappy 2:1 gears? (Teralow gears can get you to 3.15:1, I think)
Kind of a mixed bag. Durable till you really beat on them hard while rock crawling. 2:1(everyone but ford) or 2.46:1(ford) gears from the factory and you could get the aftermarket gears kits that helped eliminate some of the slop in the intermediate shaft and side loading in the gears.
-
Buy for $7500 with anticipation of spending $15k total - You'll have a pretty killer rig at that point
-
No title i presume
-
05+ superduty axle parts
http://www.hardlinecrawlers.com/forums/index.php?topic=57437.0
-
I wish. Kenny Hauk does these conversions for $45,000.
https://www.clevelandpap.com/shop/engine-packages/16-challenger-srt-hellcat-6-2l-supercharged-hemi-engine-7k/
-
@tcdawg
https://kansascity.craigslist.org/cto/d/04-jeep-wrangler-lj-inline-6/6356302188.html
-
The ad mentions "a little rust". No thanks.
-
The ad mentions "a little rust". No thanks.
Lol
Sent from my Pixel XL using Tapatalk
-
SubduraMaxaburbs everywhere
http://www.ebay.com/itm/like/132361634210?vectorid=229466&lgeo=1&item=132361634210&rmvSB=true
http://www.ebay.com/itm/like/132369153781?vectorid=229466&lgeo=1&item=132369153781&rmvSB=true
https://www.ebay.com/itm/2007-Chevrolet-Suburban-Duramax-2500-LT/232533532241?_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D1%26asc%3D20150313114020%26meid%3D810466ae96614b2987e76386e39b0904%26pid%3D100338%26rk%3D3%26rkt%3D30%26mehot%3Dpp%26sd%3D132369153781&_trksid=p2141725.c100338.m3726
-
SubduraMaxaburbs everywhere
http://www.ebay.com/itm/like/132361634210?vectorid=229466&lgeo=1&item=132361634210&rmvSB=true
http://www.ebay.com/itm/like/132369153781?vectorid=229466&lgeo=1&item=132369153781&rmvSB=true
https://www.ebay.com/itm/2007-Chevrolet-Suburban-Duramax-2500-LT/232533532241?_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D1%26asc%3D20150313114020%26meid%3D810466ae96614b2987e76386e39b0904%26pid%3D100338%26rk%3D3%26rkt%3D30%26mehot%3Dpp%26sd%3D132369153781&_trksid=p2141725.c100338.m3726
Which one are you buying?
-
Doug driving a red JKU on 40's and a diesel-powered SUV tow pig.... its like 2011 all over again!
-
Doug driving a red JKU on 40's and a diesel-powered SUV tow pig.... its like 2011 all over again!
And 2012, 2013, 2014, 2015, 2016, 2017
-
And 2012, 2013, 2014, 2015, 2016, 2017
I was thinking about the Excursion you had when I first joined the group...
-
And 2012, 2013, 2014, 2015, 2016, 2017
I was thinking about the Excursion you had when I first joined the group...
Ahhh
(http://i245.photobucket.com/albums/gg46/reynoldsdb/Jeep%20Stuff/2008%20Rubicon/Jeep%20Beach%202011/2011-05-10_20-13-48_966.jpg) (http://s245.photobucket.com/user/reynoldsdb/media/Jeep%20Stuff/2008%20Rubicon/Jeep%20Beach%202011/2011-05-10_20-13-48_966.jpg.html)
-
SubduraMaxaburbs everywhere
http://www.ebay.com/itm/like/132361634210?vectorid=229466&lgeo=1&item=132361634210&rmvSB=true
http://www.ebay.com/itm/like/132369153781?vectorid=229466&lgeo=1&item=132369153781&rmvSB=true
https://www.ebay.com/itm/2007-Chevrolet-Suburban-Duramax-2500-LT/232533532241?_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D1%26asc%3D20150313114020%26meid%3D810466ae96614b2987e76386e39b0904%26pid%3D100338%26rk%3D3%26rkt%3D30%26mehot%3Dpp%26sd%3D132369153781&_trksid=p2141725.c100338.m3726
The first two are for sale by my guy Nick, Duramax Specialties.
The third...don't know him
-
And 2012, 2013, 2014, 2015, 2016, 2017
I was thinking about the Excursion you had when I first joined the group...
Ahhh
(http://i245.photobucket.com/albums/gg46/reynoldsdb/Jeep%20Stuff/2008%20Rubicon/Jeep%20Beach%202011/2011-05-10_20-13-48_966.jpg) (http://s245.photobucket.com/user/reynoldsdb/media/Jeep%20Stuff/2008%20Rubicon/Jeep%20Beach%202011/2011-05-10_20-13-48_966.jpg.html)
Nice!!
Tow rig & camper.
-
SubduraMaxaburbs everywhere
http://www.ebay.com/itm/like/132361634210?vectorid=229466&lgeo=1&item=132361634210&rmvSB=true
http://www.ebay.com/itm/like/132369153781?vectorid=229466&lgeo=1&item=132369153781&rmvSB=true
The first two are for sale by my guy Nick, Duramax Specialties.
The third...don't know him
He should ad more photos //LMAO//
-
Was @ Wal marts getting cash to buy Jeep parts from Allsouth & found 50 cal steel ammo cans for $8.34. Normal price is $13.??
These are $20 at Dicks & Acadamy. The cheap plastic smaller cans at HF are $5 on sale.
-
If anyone needs some tires Discount tire on eBay is having their spend $400 get $100 off sale. Use Code PMOTORS17. Make seperate transactions to increase your savings. I noticed I could get 4 35" Cooper Discover STT Pro's shipped to my house for $698.80
-
Academy Sports has this sale. About $40 more than
I paid for mine but, you get a free revolver....
(https://farm5.staticflickr.com/4490/37236494624_c9eaffb05e_o.jpg) (https://flic.kr/p/YJsLy1)
-
Ordered this last week on sale for $39 they
came in yesterday...
Reviews seemed to be pretty good.
Now just to get to the range and try em out.
(https://farm5.staticflickr.com/4498/37915682692_15f3281f58_o.jpg) (https://flic.kr/p/ZLtMv7)
-
If anyone needs some tires Discount tire on eBay is having their spend $400 get $100 off sale. Use Code PMOTORS17. Make seperate transactions to increase your savings. I noticed I could get 4 35" Cooper Discover STT Pro's shipped to my house for $698.80
I did this exact thing for my 40" MTR's and it worked perfectly... good deal.
-
Academy Sports has this sale. About $40 more than
I paid for mine but, you get a free revolver....
(https://farm5.staticflickr.com/4490/37236494624_c9eaffb05e_o.jpg)
(https://flic.kr/p/YJsLy1)
I got this 2 Father's days ago for the same price. My daughter loves the .22 & the boy & I enjoy the 9mm.
I wanted both & this sale made it a lock for me.
Now to find a AR.
-
For a minute I thought @Anvilsam was jumping ship.
https://www.rockcrawlersforsale.com/autos/jeep/jk/2014-rubicon-cage-one-tons-supercharged-1741.html
-
For a minute I thought @Anvilsam was jumping ship.
https://www.rockcrawlersforsale.com/autos/jeep/jk/2014-rubicon-cage-one-tons-supercharged-1741.html
No way!
Sent from my iPhone using Tapatalk
-
For a minute I thought @Anvilsam was jumping ship.
https://www.rockcrawlersforsale.com/autos/jeep/jk/2014-rubicon-cage-one-tons-supercharged-1741.html
That Jeep listed made Waterfall at Harlan.
Sent from my iPhone using Tapatalk
-
For a minute I thought @Anvilsam was jumping ship.
https://www.rockcrawlersforsale.com/autos/jeep/jk/2014-rubicon-cage-one-tons-supercharged-1741.html
That Jeep listed made Waterfall at Harlan.
Sent from my iPhone using Tapatalk
Shots fired?
-
For a minute I thought @Anvilsam was jumping ship.
https://www.rockcrawlersforsale.com/autos/jeep/jk/2014-rubicon-cage-one-tons-supercharged-1741.html
That Jeep listed made Waterfall at Harlan.
Sent from my iPhone using Tapatalk
Shots fired?
I guess I really can’t say to much because my Jeep wasn’t even there. But fact are facts.
Sent from my iPhone using Tapatalk
-
I always figured Sam was trying to be like Koshy.
Yea except mine was around before his and daddy isn’t paying for mine.
Sent from my iPhone using Tapatalk
-
For a minute I thought @Anvilsam was jumping ship.
https://www.rockcrawlersforsale.com/autos/jeep/jk/2014-rubicon-cage-one-tons-supercharged-1741.html
That Jeep listed made Waterfall at Harlan.
Sent from my iPhone using Tapatalk
Shots fired?
I guess I really can’t say to much because my Jeep wasn’t even there. But fact are facts.
Sent from my iPhone using Tapatalk
No you can’t. Talk to me when you actually wheel.
Sent from my iPhone using Tapatalk
-
For a minute I thought @Anvilsam was jumping ship.
https://www.rockcrawlersforsale.com/autos/jeep/jk/2014-rubicon-cage-one-tons-supercharged-1741.html
That Jeep listed made Waterfall at Harlan.
Sent from my iPhone using Tapatalk
Shots fired?
I guess I really can’t say to much because my Jeep wasn’t even there. But fact are facts.
Sent from my iPhone using Tapatalk
No you can’t. Talk to me when you actually wheel.
Sent from my iPhone using Tapatalk
That’s why I stopped talking. Just started stating facts.
Sent from my iPhone using Tapatalk
-
For a minute I thought @Anvilsam was jumping ship.
https://www.rockcrawlersforsale.com/autos/jeep/jk/2014-rubicon-cage-one-tons-supercharged-1741.html
That Jeep listed made Waterfall at Harlan.
Sent from my iPhone using Tapatalk
Shots fired?
I guess I really can’t say to much because my Jeep wasn’t even there. But fact are facts.
Sent from my iPhone using Tapatalk
You mean the driver made it?
I wasn't there either lol. Have I even seen waterfall?
-
For a minute I thought @Anvilsam was jumping ship.
https://www.rockcrawlersforsale.com/autos/jeep/jk/2014-rubicon-cage-one-tons-supercharged-1741.html
That Jeep listed made Waterfall at Harlan.
Sent from my iPhone using Tapatalk
Shots fired?
I guess I really can’t say to much because my Jeep wasn’t even there. But fact are facts.
Sent from my iPhone using Tapatalk
You mean the driver made it?
I wasn't there either lol. Have I even seen waterfall?
I am sure you have. It’s visible from the main trail before you get to lower rock garden.
Sent from my iPhone using Tapatalk
-
I am sure you have. It’s visible from the main trail before you get to lower rock garden.
Sent from my iPhone using Tapatalk
Ahhh the cool massive boulder climb below lower rock garden. Looks awesome, have some of our guys done it?
-
I am sure you have. It’s visible from the main trail before you get to lower rock garden.
Sent from my iPhone using Tapatalk
Ahhh the cool massive boulder climb below lower rock garden. Looks awesome, have some of our guys done it?
i know rob has, saw it myself, then broke trying to follow. Idk about anyone else here
-
I made it years ago on my first Harlan trip. It has benno dug out a lot since then.
-
Home Depot in Dahlonega has black, below the bed tool boxes for $116, regular price is $299.
-
Home Depot in Dahlonega has black, below the bed tool boxes for $116, regular price is $299.
Is this code for sex toy storage.....
Sent from my iPhone using Tapatalk
-
Yeap. My other one is about full. I got tired of inflating & deflating. Damn asthma.
-
Home Depot in Dahlonega has black, below the bed tool boxes for $116, regular price is $299.
Couldn't find these
-
Sold out?
-
Suckdown winch 2500# $55.99
https://www.tractorsupply.com/tsc/product/traveller-12v-atv-electric-winch-2-500-lb-capacity
8000# $240
https://www.tractorsupply.com/tsc/product/traveller-12v-truck-electric-winch-8-000-lb-capacity
10,000# $320
https://www.tractorsupply.com/tsc/product/traveller-12v-truck-electric-winch-10-000-lb-capacity
-
@tcdawg
https://denver.craigslist.org/cto/d/2006-wrangler-unlimited/6386109873.html
11 years of dry rot and dried up seals and gaskets
Sent from my iPhone using Tapatalk
-
@tcdawg
https://denver.craigslist.org/cto/d/2006-wrangler-unlimited/6386109873.html
11 years of dry rot and dried up seals and gaskets
Sent from my iPhone using Tapatalk
A "new" LJ with 200 miles that has never really been driven and is for the pursists who want a "new" LJ required an aftermarket radiator?
-
@tcdawg
https://denver.craigslist.org/cto/d/2006-wrangler-unlimited/6386109873.html
11 years of dry rot and dried up seals and gaskets
Sent from my iPhone using Tapatalk
A "new" LJ with 200 miles that has never really been driven and is for the pursists who want a "new" LJ required an aftermarket radiator?
What a deal
Sent from my SM-G928V using Tapatalk
-
@tcdawg
https://denver.craigslist.org/cto/d/2006-wrangler-unlimited/6386109873.html
11 years of dry rot and dried up seals and gaskets
Sent from my iPhone using Tapatalk
what a joke
-
First thing that pops out to me. Why does a Jeep with 200 miles have an aftermarket radiator in it already?
Sent from my iPhone using Tapatalk
-
First thing that pops out to me. Why does a Jeep with 200 miles have an aftermarket radiator in it already?
Sent from my iPhone using Tapatalk
Exactly. Original probably clogged up.
-
It is plastic. It probably rotted.
-
I need another set. Good deal.
-
I need another set. Good deal.
Can't find it, need another set of 12 tons anyway
-
I need another set. Good deal.
Can't find it, need another set of 12 tons anyway
Harbor Freight email
Sent from my iPhone using Tapatalk
-
https://atlanta.craigslist.org/atl/tro/d/2017-kaufman-2-car-trailer/6389385646.html
-
Unique design on a double deck over and a terrific price.
Road trip somebody.
https://springfield.craigslist.org/tro/d/triple-axle-gooseneck-trailer/6387549300.html
-
Unique design on a double deck over and a terrific price.
Road trip somebody.
https://springfield.craigslist.org/tro/d/triple-axle-gooseneck-trailer/6387549300.html
If someone had a dually f350 / 450, think you could fit 3 on there - maybe 2 JKU & 1 TJ? I'm out, too much hassle for me so just chit chatting on it.
Yes if it had 7k axles but I think out would max out with the 3 6s with the trailer weight.
-
Add money for brakes and tires and other misc. issues. Then a Kodiak to pull it.
Sent from my iPhone using Tapatalk
-
I doubt you could squeeze anything more than 3 TJ/JKs or 2 JKUs on there.
And a heavy hauler.
-
(https://uploads.tapatalk-cdn.com/20171121/90d555aa63b888e2d3416356efe5fabd.jpg)
https://provo.craigslist.org/cto/d/toyota-land-cruiser-fj40-rock/6374037417.html
-
Good deal on HL for a LJ.
http://www.hardlinecrawlers.com/forums/index.php?topic=57711.0
-
(https://uploads.tapatalk-cdn.com/20171122/dc2c9b737f60bd42d2d715ab929586a5.jpg)
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20171122/2324b81ac9876aaa8cb814e22b7261c8.jpg)
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20171122/dc2c9b737f60bd42d2d715ab929586a5.jpg)
Sent from my iPhone using Tapatalk
Playboy.com? What site?
Sent from my SM-G930V using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20171122/dc2c9b737f60bd42d2d715ab929586a5.jpg)
Sent from my iPhone using Tapatalk
Playboy.com? What site?
Sent from my SM-G930V using Tapatalk
https://www.aceengineeringandfab.com
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20171122/2324b81ac9876aaa8cb814e22b7261c8.jpg)
Sent from my iPhone using Tapatalk
Great product. Amazing Company. Been a Crawling for Reid supporter since the first event.
I have run a Spiderwebshade for years and really enjoy it.
-
I may have missed this one in other post.
https://www.ratchetstraps.com/
15% off
Code
RS15
-
Sweet deal
https://www.homedepot.com/p/Husky-Mechanics-Tool-Set-268-Piece-H268MTS/203541462?cm_mmc=Shopping%7cTHD%7cG%7c0%7cG-BASE-PLA-D25T-HandTools%7c&gclid=CjwKCAiAo9_QBRACEiwASknDwVtohhCj-90KAipzPhJWRLl1HNONlwh69Q0l5t5hBIqGCaaegaykMBoCmqMQAvD_BwE&gclsrc=aw.ds&dclid=CIyy5biI2NcCFcMOgQod2mIGag
-
'14 JK/JKU OEM steering gearbox ( 11/29/2017)
I have seen several people asking about hydraulic assist - even talked about it on a thread a few days ago - and thought this would be worth posting on here since the talk included options for assisted steering on a JK/JKU .
I'd say that this would be a great candidate for tapping and getting a WTO or other ram if it is still avail for sale ...
here is the post:
http://www.jkowners.com/forum/sale-jeep-parts/368178-jk-oem-steering-box-w-44k-miles.html
-
'14 JK/JKU OEM steering gearbox ( 11/29/2017)
I have seen several people asking about hydraulic assist - even talked about it on a thread a few days ago - and thought this would be worth posting on here since the talk included options for assisted steering on a JK/JKU .
I'd say that this would be a great candidate for tapping and getting a WTO or other ram if it is still avail for sale ...
here is the post:
http://www.jkowners.com/forum/sale-jeep-parts/368178-jk-oem-steering-box-w-44k-miles.html
$127.63 rebuilt and a low core.
https://www.carid.com/cardone/remanufactured-steering-gear-mpn-27-8417.html
-
'14 JK/JKU OEM steering gearbox ( 11/29/2017)
I have seen several people asking about hydraulic assist - even talked about it on a thread a few days ago - and thought this would be worth posting on here since the talk included options for assisted steering on a JK/JKU .
I'd say that this would be a great candidate for tapping and getting a WTO or other ram if it is still avail for sale ...
here is the post:
http://www.jkowners.com/forum/sale-jeep-parts/368178-jk-oem-steering-box-w-44k-miles.html
$127.63 rebuilt and a low core.
https://www.carid.com/cardone/remanufactured-steering-gear-mpn-27-8417.html
cardone rebuilt junk. I don't trust cardone to rebuild a LEGO block cube.
-
About 7 of these on the shelf at the flagship store Cumberland Parkway Home Depot - Clearance section endcap in the middle of the store. Looks like they are moving to next year’s model. This appears to be this year’s model. Bought one myself and it’s badassery is even more than my two year old model. Doubt they will be there long.
(https://uploads.tapatalk-cdn.com/20171130/d40377dd54e0c678ce2d14052581dfc6.jpg)
Sent from my iPhone using Tapatalk
I will be hitting the local Home depot to see if they have them on sell here.
-
I'm pretty sure Dahlonega HD had some. I got real lucky & got my new impact, battery & case at work for $60.
-
About 7 of these on the shelf at the flagship store Cumberland Parkway Home Depot - Clearance section endcap in the middle of the store. Looks like they are moving to next year’s model. This appears to be this year’s model. Bought one myself and it’s badassery is even more than my two year old model. Doubt they will be there long.
(https://uploads.tapatalk-cdn.com/20171130/d40377dd54e0c678ce2d14052581dfc6.jpg)
Sent from my iPhone using Tapatalk
Are you going by there again?
If so, text me. I could PayPal you money for one.
Sent from my SM-G935V using Tapatalk
-
About 7 of these on the shelf at the flagship store Cumberland Parkway Home Depot - Clearance section endcap in the middle of the store. Looks like they are moving to next year’s model. This appears to be this year’s model. Bought one myself and it’s badassery is even more than my two year old model. Doubt they will be there long.
(https://uploads.tapatalk-cdn.com/20171130/d40377dd54e0c678ce2d14052581dfc6.jpg)
Sent from my iPhone using Tapatalk
How much is the battery and charger to go with that?
-
About 7 of these on the shelf at the flagship store Cumberland Parkway Home Depot - Clearance section endcap in the middle of the store. Looks like they are moving to next year’s model. This appears to be this year’s model. Bought one myself and it’s badassery is even more than my two year old model. Doubt they will be there long.
(https://uploads.tapatalk-cdn.com/20171130/d40377dd54e0c678ce2d14052581dfc6.jpg)
Sent from my iPhone using Tapatalk
How much is the battery and charger to go with that?
Probably about $150 for battery and charger
Sent from my iPhone using Tapatalk
-
About 7 of these on the shelf at the flagship store Cumberland Parkway Home Depot - Clearance section endcap in the middle of the store. Looks like they are moving to next year’s model. This appears to be this year’s model. Bought one myself and it’s badassery is even more than my two year old model. Doubt they will be there long.
(https://uploads.tapatalk-cdn.com/20171130/d40377dd54e0c678ce2d14052581dfc6.jpg)
Sent from my iPhone using Tapatalk
That's the one I have. Sam too I think. It is a freaking workhorse. Best tool I own.
Good deal right there.
-
About 7 of these on the shelf at the flagship store Cumberland Parkway Home Depot - Clearance section endcap in the middle of the store. Looks like they are moving to next year’s model. This appears to be this year’s model. Bought one myself and it’s badassery is even more than my two year old model. Doubt they will be there long.
(https://uploads.tapatalk-cdn.com/20171130/d40377dd54e0c678ce2d14052581dfc6.jpg)
Sent from my iPhone using Tapatalk
How much is the battery and charger to go with that?
Probably about $150 for battery and charger
Sent from my iPhone using Tapatalk
https://www.amazon.com/Milwaukee-48-59-1850-M18-5-0-Starter/dp/B00XNUEYBA/ref=sr_1_10?ie=UTF8&qid=1512071729&sr=8-10&keywords=milwaukee+m18+battery
$95 on the Amazon
-
I saw a review/disassembly where the knock off China batteries were all around better & tons cheaper than the Milwaukee brand batteries.
-
About 7 of these on the shelf at the flagship store Cumberland Parkway Home Depot - Clearance section endcap in the middle of the store. Looks like they are moving to next year’s model. This appears to be this year’s model. Bought one myself and it’s badassery is even more than my two year old model. Doubt they will be there long.
(https://uploads.tapatalk-cdn.com/20171130/d40377dd54e0c678ce2d14052581dfc6.jpg)
Sent from my iPhone using Tapatalk
I will be hitting the local Home depot to see if they have them on sell here.
Local Home Depot didn't have them :(
-
About 7 of these on the shelf at the flagship store Cumberland Parkway Home Depot - Clearance section endcap in the middle of the store. Looks like they are moving to next year’s model. This appears to be this year’s model. Bought one myself and it’s badassery is even more than my two year old model. Doubt they will be there long.
(https://uploads.tapatalk-cdn.com/20171130/d40377dd54e0c678ce2d14052581dfc6.jpg)
Sent from my iPhone using Tapatalk
How much is the battery and charger to go with that?
Probably about $150 for battery and charger
Sent from my iPhone using Tapatalk
https://www.amazon.com/Milwaukee-48-59-1850-M18-5-0-Starter/dp/B00XNUEYBA/ref=sr_1_10?ie=UTF8&qid=1512071729&sr=8-10&keywords=milwaukee+m18+battery
$95 on the Amazon
You've found a better price on things a few times. Which price checker do you use?
-
About 7 of these on the shelf at the flagship store Cumberland Parkway Home Depot - Clearance section endcap in the middle of the store. Looks like they are moving to next year’s model. This appears to be this year’s model. Bought one myself and it’s badassery is even more than my two year old model. Doubt they will be there long.
(https://uploads.tapatalk-cdn.com/20171130/d40377dd54e0c678ce2d14052581dfc6.jpg)
Sent from my iPhone using Tapatalk
I will be hitting the local Home depot to see if they have them on sell here.
Local Home Depot didn't have them :(
I'll check up the road & see if they have any.
-
2012 jeep 6 speed. 37 inch tires. 5 in lift.. just done 8 months ago. 80k miles
For $20k - good price?
4.88 gears good for it? Can have whatever ratio.
No, it's not for me.
(https://uploads.tapatalk-cdn.com/20171201/5982f8523bddeef0e910a38019f4d026.jpg)
Sent from my SM-G935V using Tapatalk
-
2012 jeep 6 speed. 37 inch tires. 5 in lift.. just done 8 months ago. 80k miles
For $20k - good price?
4.88 gears good for it? Can have whatever ratio.
No, it's not for me. (https://uploads.tapatalk-cdn.com/20171201/5982f8523bddeef0e910a38019f4d026.jpg)
Sent from my SM-G935V using Tapatalk
Yes.
-
2012 jeep 6 speed. 37 inch tires. 5 in lift.. just done 8 months ago. 80k miles
For $20k - good price?
4.88 gears good for it? Can have whatever ratio.
No, it's not for me.
(https://uploads.tapatalk-cdn.com/20171201/5982f8523bddeef0e910a38019f4d026.jpg)
Sent from my SM-G935V using Tapatalk
Yes
Yes
-
@Carlos LOBO you still looking?
-
Looks like SBC.
-
I read 42” Nitto Trail Grapplers go on sale tomorrow!
-
There are four 40's on HL for $1400. They have 600 miles on them.
-
2012 jeep 6 speed. 37 inch tires. 5 in lift.. just done 8 months ago. 80k miles
For $20k - good price?
4.88 gears good for it? Can have whatever ratio.
No, it's not for me.
(https://uploads.tapatalk-cdn.com/20171201/5982f8523bddeef0e910a38019f4d026.jpg)
Sent from my SM-G935V using Tapatalk
$20k sounds like too low a price
Where is the ad?
-
2012 jeep 6 speed. 37 inch tires. 5 in lift.. just done 8 months ago. 80k miles
For $20k - good price?
4.88 gears good for it? Can have whatever ratio.
No, it's not for me.
(https://uploads.tapatalk-cdn.com/20171201/5982f8523bddeef0e910a38019f4d026.jpg)
Sent from my SM-G935V using Tapatalk
$20k sounds like too low a price
Where is the ad?
There's not.
I know someone that's about to buy it. Not sure how he knows the seller but the seller has more money than he's worried about.
Sent from my SM-G935V using Tapatalk
-
2012 jeep 6 speed. 37 inch tires. 5 in lift.. just done 8 months ago. 80k miles
For $20k - good price?
4.88 gears good for it? Can have whatever ratio.
No, it's not for me.
(https://uploads.tapatalk-cdn.com/20171201/5982f8523bddeef0e910a38019f4d026.jpg)
Sent from my SM-G935V using Tapatalk
$20k sounds like too low a price
Where is the ad?
There's not.
I know someone that's about to buy it. Not sure how he knows the seller but the seller has more money than he's worried about.
Sent from my SM-G935V using Tapatalk
He selling anything else?
-
For realz.
I could use a summer home on the cheap.
-
2012 jeep 6 speed. 37 inch tires. 5 in lift.. just done 8 months ago. 80k miles
For $20k - good price?
4.88 gears good for it? Can have whatever ratio.
No, it's not for me.
(https://uploads.tapatalk-cdn.com/20171201/5982f8523bddeef0e910a38019f4d026.jpg)
Sent from my SM-G935V using Tapatalk
$20k sounds like too low a price
Where is the ad?
There's not.
I know someone that's about to buy it. Not sure how he knows the seller but the seller has more money than he's worried about.
Sent from my SM-G935V using Tapatalk
He selling anything else?
You have your eye on the Sliders? Don’t you?
-
Before someone spends $10-12K on axles for there JK, take a look at something like this YJ. Looks like a good base to work with. If it were me I would probably sink another $3k or so in it but it would be a great trail Jeep.
http://www.hardlinecrawlers.com/forums/index.php?topic=57800.0;topicseen
-
The RTIC 25% Off Sale Ends Friday 12-08-17 at Midnight.
-
Amazon has a great deal on RTIC’s today
(https://uploads.tapatalk-cdn.com/20171210/e51d782350c06fc79af6af6170c28fb5.jpg)
Sent from my iPhone using Tapatalk
-
Wish I had some extra money to burn.
-
Wish I had some extra money to burn.
@Doug that's what you need to tow my Jeep across the country!! Just trying to help so you can take yours too :)
-
Wish I had some extra money to burn.
@Doug that's what you need to tow my Jeep across the country!! Just trying to help so you can take yours too :)
Was sold before he posted it lol
-
Wish I had some extra money to burn.
@Doug that's what you need to tow my Jeep across the country!! Just trying to help so you can take yours too :)
Was sold before he posted it lol
When do you pick it up?
As soon as he finds a truck to pull it. Already sold the dodge
-
Wish I had some extra money to burn.
@Doug that's what you need to tow my Jeep across the country!! Just trying to help so you can take yours too :)
Was sold before he posted it lol
When do you pick it up?
As soon as he finds a truck to pull it. Already sold the dodge
(https://media0.giphy.com/media/RL0xU1daTlMoE/200.webp#0-grid1)
-
I cant figure out how to post gifs. I had a good one though
-
I cant figure out how to post gifs. I had a good one though
So you post you failed?
This is more my style anyway. Drive over low double with 3 7000# axles
(https://uploads.tapatalk-cdn.com/20171212/3cb99577fd66638788b1221c7530fe3f.jpg)
-
I cant figure out how to post gifs. I had a good one though
So you post you failed?
This is more my style anyway. Drive over low double with 3 7000# axles
(https://uploads.tapatalk-cdn.com/20171212/3cb99577fd66638788b1221c7530fe3f.jpg)
$3800?
Sent from my SM-G930V using Tapatalk
-
I cant figure out how to post gifs. I had a good one though
So you post you failed?
This is more my style anyway. Drive over low double with 3 7000# axles
(https://uploads.tapatalk-cdn.com/20171212/3cb99577fd66638788b1221c7530fe3f.jpg)
$3800?
Sent from my SM-G930V using Tapatalk
You looking to rent?
-
https://rapidcity.craigslist.org/tro/d/38-goose-neck-trailer/6373919371.html
-
http://www.daveysjeeps.com/repairables/davey1.html
-
For the Diesel folks.
https://www.ebay.com/itm/2005-Jeep-Wrangler-4BT-Cummins-Diesel-Rubicon-Sahara-Unlimited-LJ/152849363214?hash=item239688310e:g:EnwAAOSwh1paSm-b&vxp=mtr
-
Friend is selling is LJ, if anyone is interested
(https://uploads.tapatalk-cdn.com/20180108/8abdee3c9c709d1a4b9fd956239dce80.jpg)
Sent from my SM-G955U using Tapatalk
-
http://www.daveysjeeps.com/repairables/davey1.html
40k
I was thinking can't build it for that, great deal.
6.0 LS2 400HP, 4L60E, 241OR, FRONT HP D-60, REAR D-60, 1 1/2" 35 SPLINE SHAFTS FRT/REAR, CTM FRONT U-JOINTS, 4.88 RATIO, ARB AIR LOCKERS, FRONT WILWOOD DISCS, REAR FORD DISCS, WARN PREMIUM HUBS, ANTIROCK FRONT SWAY BAR, H2 RIMS WITH CHAMPION BEADLOCKS, NEW 37" MTR TIRES, ARB REAR BUMPER/TIRE CARRIER, FRONT SAVVY BUMPER, NEW WARN 9.5 TI WINCH WITH SYNTHETIC ROPE, 6" FULL TRACTION LONG ARM, TOMB RAIDER SEATS & BELTS, FACTORY NAVIGATION RADIO WITH SUB., COMPASS TEMP. MIRROR, A/C, ROCK HARD ADD ON FRONT BARS FOR CAGE, INSIDE TUB LINE-X SPRAYED, POISON SPYDER REAR SIDES, ROCKERS, FENDERS. 100% RUST FREE JEEP.
(http://www.daveysjeeps.com/repairables/images/davey1/davey1.gif)
-
Can you get tags on something that has a salvaged title?
Never mind, I Googled it.
"Salvaged vehicles cannot be operated legally on public roads in GA"
Incase anybody else was wondering.
Sent from my SM-G928V using Tapatalk
-
Can you get tags on something that has a salvaged title?
Never mind, I Googled it.
"Salvaged vehicles cannot be operated legally on public roads in GA"
Incase anybody else was wondering.
Sent from my SM-G928V using Tapatalk
Not as a Salvage, but you get a "Rebuilt"..
Vehicles must go through the Rebuilt process if:
- Branded “Salvage” in Georgia.
- Out of state branded “Salvage,” “Flood,” “Water,” “Fire,” and “Total Loss.”
https://dor.georgia.gov/titles-rebuilt-or-restored-vehicles
A salvage titled vehicle must go through the Rebuilt Inspection process before a rebuilt title can be issued on vehicles that require titles. To obtain a rebuilt title:
Be a Licensed Rebuilder – Anyone who purchases a salvage or wrecked vehicle for the purpose of restoring or rebuilding must be licensed as a rebuilder.
Pass Inspection – When the vehicle is restored but before it is painted, it must pass inspection by one of the Department’s approved private inspectors or stations.
-
Can you get tags on something that has a salvaged title?
Never mind, I Googled it.
"Salvaged vehicles cannot be operated legally on public roads in GA"
Incase anybody else was wondering.
Sent from my SM-G928V using Tapatalk
Not as a Salvage, but you get a "Rebuilt"..
Vehicles must go through the Rebuilt process if:
- Branded “Salvage” in Georgia.
- Out of state branded “Salvage,” “Flood,” “Water,” “Fire,” and “Total Loss.”
https://dor.georgia.gov/titles-rebuilt-or-restored-vehicles
A salvage titled vehicle must go through the Rebuilt Inspection process before a rebuilt title can be issued on vehicles that require titles. To obtain a rebuilt title:
Be a Licensed Rebuilder – Anyone who purchases a salvage or wrecked vehicle for the purpose of restoring or rebuilding must be licensed as a rebuilder.
Pass Inspection – When the vehicle is restored but before it is painted, it must pass inspection by one of the Department’s approved private inspectors or stations.
Most of that holds true, although "licensed rebuilder" im unsure about, I hold no special license as an individual or a corporation and I have rebuilt probly 10 or more, all with clean inspections. The whole licence thing was before reinspections were required by the state, meaning anyone who filled out the paperwork and got the rebuilder license could self-inspect and possibly drive some real unsafe junk on the highways at speed legally.
Everything has to be repaired and corrected, not just what you want to spend money on, meaning that little dent or scratch that had nothing to do with the accident that totaled it. When ins companies and body shops inspect possible totals absolutely every aspect of the vehicle is taken into account, meaning interior, tires, paint condition, glass, add-ons, mileage, etc.. The inspectors expect them to be 100% when inspected meaning as they came off the showroom floor.
ABSOLUTE best way to handle any thought of salvage or rebuild is to call your nearest re-inspector and ask questions, they are ALL case by case.. owner retained, bought from individual, bought from licensed reseller, bought from out of state, all have different repair methods and ways they have to be inspected at different states of repair.
I CANNOT stress enough, there are reasons they are totaled, and reasons the state does NOT want people to rebuild cars, the state and feds are purposefully making it as hard as legally possible for individuals to do. Lastly, also case by case, but most insurance companies require full coverage blanket policies on salvage/rebuilt titled autos. CYA folks, or pay the price.
https://dor.georgia.gov/state-approved-inspection-stations
-
Can you get tags on something that has a salvaged title?
Never mind, I Googled it.
"Salvaged vehicles cannot be operated legally on public roads in GA"
Incase anybody else was wondering.
Sent from my SM-G928V using Tapatalk
Not as a Salvage, but you get a "Rebuilt"..
Vehicles must go through the Rebuilt process if:
- Branded “Salvage” in Georgia.
- Out of state branded “Salvage,” “Flood,” “Water,” “Fire,” and “Total Loss.”
https://dor.georgia.gov/titles-rebuilt-or-restored-vehicles
A salvage titled vehicle must go through the Rebuilt Inspection process before a rebuilt title can be issued on vehicles that require titles. To obtain a rebuilt title:
Be a Licensed Rebuilder – Anyone who purchases a salvage or wrecked vehicle for the purpose of restoring or rebuilding must be licensed as a rebuilder.
Pass Inspection – When the vehicle is restored but before it is painted, it must pass inspection by one of the Department’s approved private inspectors or stations.
Most of that holds true, although "licensed rebuilder" im unsure about, I hold no special license as an individual or a corporation and I have rebuilt probly 10 or more, all with clean inspections. The whole licence thing was before reinspections were required by the state, meaning anyone who filled out the paperwork and got the rebuilder license could self-inspect and possibly drive some real unsafe junk on the highways at speed legally.
Everything has to be repaired and corrected, not just what you want to spend money on, meaning that little dent or scratch that had nothing to do with the accident that totaled it. When ins companies and body shops inspect possible totals absolutely every aspect of the vehicle is taken into account, meaning interior, tires, paint condition, glass, add-ons, mileage, etc.. The inspectors expect them to be 100% when inspected meaning as they came off the showroom floor.
ABSOLUTE best way to handle any thought of salvage or rebuild is to call your nearest re-inspector and ask questions, they are ALL case by case.. owner retained, bought from individual, bought from licensed reseller, bought from out of state, all have different repair methods and ways they have to be inspected at different states of repair.
I CANNOT stress enough, there are reasons they are totaled, and reasons the state does NOT want people to rebuild cars, the state and feds are purposefully making it as hard as legally possible for individuals to do. Lastly, also case by case, but most insurance companies require full coverage blanket policies on salvage/rebuilt titled autos. CYA folks, or pay the price.
https://dor.georgia.gov/state-approved-inspection-stations
Justin, did you look at this one? Looks to be completed long ago but carries a salvage title from another state. Does that change anything?
-
Can you get tags on something that has a salvaged title?
Never mind, I Googled it.
"Salvaged vehicles cannot be operated legally on public roads in GA"
Incase anybody else was wondering.
Sent from my SM-G928V using Tapatalk
Not as a Salvage, but you get a "Rebuilt"..
Vehicles must go through the Rebuilt process if:
- Branded “Salvage” in Georgia.
- Out of state branded “Salvage,” “Flood,” “Water,” “Fire,” and “Total Loss.”
https://dor.georgia.gov/titles-rebuilt-or-restored-vehicles
A salvage titled vehicle must go through the Rebuilt Inspection process before a rebuilt title can be issued on vehicles that require titles. To obtain a rebuilt title:
Be a Licensed Rebuilder – Anyone who purchases a salvage or wrecked vehicle for the purpose of restoring or rebuilding must be licensed as a rebuilder.
Pass Inspection – When the vehicle is restored but before it is painted, it must pass inspection by one of the Department’s approved private inspectors or stations.
Most of that holds true, although "licensed rebuilder" im unsure about, I hold no special license as an individual or a corporation and I have rebuilt probly 10 or more, all with clean inspections. The whole licence thing was before reinspections were required by the state, meaning anyone who filled out the paperwork and got the rebuilder license could self-inspect and possibly drive some real unsafe junk on the highways at speed legally.
Everything has to be repaired and corrected, not just what you want to spend money on, meaning that little dent or scratch that had nothing to do with the accident that totaled it. When ins companies and body shops inspect possible totals absolutely every aspect of the vehicle is taken into account, meaning interior, tires, paint condition, glass, add-ons, mileage, etc.. The inspectors expect them to be 100% when inspected meaning as they came off the showroom floor.
ABSOLUTE best way to handle any thought of salvage or rebuild is to call your nearest re-inspector and ask questions, they are ALL case by case.. owner retained, bought from individual, bought from licensed reseller, bought from out of state, all have different repair methods and ways they have to be inspected at different states of repair.
I CANNOT stress enough, there are reasons they are totaled, and reasons the state does NOT want people to rebuild cars, the state and feds are purposefully making it as hard as legally possible for individuals to do. Lastly, also case by case, but most insurance companies require full coverage blanket policies on salvage/rebuilt titled autos. CYA folks, or pay the price.
https://dor.georgia.gov/state-approved-inspection-stations
Justin, did you look at this one? Looks to be completed long ago but carries a salvage title from another state. Does that change anything?
it should be perfectly fine to tag in GA, if its truly a rebuilt title that would mean someone has already went through the inspection and passed. My rant was just trying to ward off anyones thoughts of how easy it would be to buy a total and rebuild for cheap, its not hardly worth it on jeeps especially bc you have to fix them to stock for inspection, then start all over with your build.
-
Seems like a bargain from here
https://atlanta.craigslist.org/nat/tro/d/1997-fleetwood-discovery-36ft/6455636571.html
-
Seems like a bargain from here
https://atlanta.craigslist.org/nat/tro/d/1997-fleetwood-discovery-36ft/6455636571.html
Doesn’t sound right to me
-
Seems like a bargain from here
https://atlanta.craigslist.org/nat/tro/d/1997-fleetwood-discovery-36ft/6455636571.html
Doesn’t sound right to me
it’s either supposed to be sixty thousand or it’s a divorce sale and she doesn’t care how much it sells for if it pisses him off. I heard a story the other day of someone bought a diamond ring for less than half of the appraised value because the husband of the seller was cheating.
-
Seems like a bargain from here
https://atlanta.craigslist.org/nat/tro/d/1997-fleetwood-discovery-36ft/6455636571.html
Doesn’t sound right to me
it’s either supposed to be sixty thousand or it’s a divorce sale and she doesn’t care how much it sells for if it pisses him off. I heard a story the other day of someone bought a diamond ring for less than half of the appraised value because the husband of the seller was cheating.
12k would be tops if it was factory perfect. That thing is ancient by today's RV standards.
-
Nice 7.3 dually
(https://uploads.tapatalk-cdn.com/20180201/6981c5195c473093aac8941365240b85.jpg)
-
Near me there is a '00,4 door, flatbed, 5 speed, 4x4 dually for $10k. New transmission. Looks like ass.
I thought it was way too much.
Also, @ Bargain Mart in Gainesville they have a magnetic door kit for a 4 door JK for $120.
-
2007 3.8 motor, transmission & 4.1 t case with 45k for $3k on HL.
-
Found you a double trailer Clark
https://charlotte.craigslist.org/tro/d/two-car-goose-neck-trailer/6475433240.html(https://uploads.tapatalk-cdn.com/20180202/2b7d5fdc55e4ff51f4f58f33937dc304.jpg)
-
Found you a double trailer Clark
https://charlotte.craigslist.org/tro/d/two-car-goose-neck-trailer/6475433240.html(https://uploads.tapatalk-cdn.com/20180202/2b7d5fdc55e4ff51f4f58f33937dc304.jpg)
$3k and I would be driving to Hickory today.
Sent from my SM-G930V using Tapatalk
-
Found you a double trailer Clark
https://charlotte.craigslist.org/tro/d/two-car-goose-neck-trailer/6475433240.html(https://uploads.tapatalk-cdn.com/20180202/2b7d5fdc55e4ff51f4f58f33937dc304.jpg)
$3k and I would be driving to Hickory today.
Sent from my SM-G930V using Tapatalk
Be careful when you find one for $3000. Those usually need entire axle assemblies since they ran the bearings dry and spun the races and scarred the spindles.
-
HF in Gainesville has a 10 lb. cO2 bottle for $60.
-
@tcdawg
Nice GW
(https://uploads.tapatalk-cdn.com/20180205/7d9623ab3626c138d91fb891e920259a.jpg)(https://uploads.tapatalk-cdn.com/20180205/dc4ebfae8a1f3722f9a740b7434c6a62.jpg)
-
2011 King Ranch 6.7 Excursion. //SLAMIN//
https://www.carsforsale.com/vehicle/details/19769937
(https://cdn04.carsforsale.com/3/1006234/3638186/562534091.jpg)
-
2011 King Ranch 6.7 Excursion. //SLAMIN//
https://www.carsforsale.com/vehicle/details/19769937
(https://cdn04.carsforsale.com/3/1006234/3638186/562534091.jpg)
That is super cool. The entire interior was swapped out with the newer interior, wow. I
but spendy.
-
2011 King Ranch 6.7 Excursion. //SLAMIN//
https://www.carsforsale.com/vehicle/details/19769937
(https://cdn04.carsforsale.com/3/1006234/3638186/562534091.jpg)
That is super cool. The entire interior was swapped out with the newer interior, wow. I
but spendy.
ahh yes internet engineers.. ad say "truck is dun right" i believe it.
-
2011 King Ranch 6.7 Excursion. //SLAMIN//
https://www.carsforsale.com/vehicle/details/19769937
(https://cdn04.carsforsale.com/3/1006234/3638186/562534091.jpg)
That is super cool. The entire interior was swapped out with the newer interior, wow. I
but spendy.
ahh yes internet engineers.. ad say "truck is dun right" i believe it.
First indication to avoid is when they can't even spell correctly. I guess beauty is in the eye of the beholder, but I would much prefer an F250.
-
If we had four kids.. this would be pretty compelling. We pack the Ram now with three.. so i could definitely see a guy with 4-5 kids and a big camper drooling over this.
-
https://albany.craigslist.org/tro/d/3-car-transportergoose/6479300539.html
-
https://albany.craigslist.org/tro/d/3-car-transportergoose/6479300539.html
Have you ever thought about relocating out west to your wheeling heaven?
Sent from my iPhone using Tapatalk
-
https://albany.craigslist.org/tro/d/3-car-transportergoose/6479300539.html
Have you ever thought about relocating out west to your wheeling heaven?
Sent from my iPhone using Tapatalk
I have
Colorado is in our 10 yr plan
-
https://albany.craigslist.org/tro/d/3-car-transportergoose/6479300539.html
Have you ever thought about relocating out west to your wheeling heaven?
Sent from my iPhone using Tapatalk
Not interested. Too many other things we enjoy. Wheeling is not #1 on our list.
-
(https://uploads.tapatalk-cdn.com/20180214/140bc98c6fa2fcba563d43f181bcab5d.jpg)
Sent from my SM-G955U using Tapatalk
-
Saw a nice Sammy on FB Marketplace not sure if it’s a deal. https://www.facebook.com/marketplace/item/189151821668334
-
Saw a nice Sammy on FB Marketplace not sure if it’s a deal. https://www.facebook.com/marketplace/item/189151821668334
That looks like fun
-
Gearwrench set at Northern
$89
https://www.northerntool.com/shop/tools/product_200638033_200638033
-
Gearwrench set at Northern
$89
https://northerntool.com/products/shop~tools~product_200638033_200638033?adv=false&utm_campaign=Liquidation&utm_medium=Facebook&utm_source=Social
That link didn't work, but here it is on the website.
https://www.northerntool.com/shop/tools/product_200638033_200638033 (https://www.northerntool.com/shop/tools/product_200638033_200638033)
-
129 Salvage in Gainesville has about 100 5 gallon containers of Wal Mart DEF fluid for $5 each.
-
https://www.walmart.com/ip/Lifetime-55-Quart-High-Performance-Cooler-Grey-90820/850043843
55-qt $97
ebates.com has 7% back on sporting goods at walmart, too, so I always try and go through another site (usually ebates & Upromise are the best) to get some extra cash. If you want to sign up for ebates.com, feel free to use this link. I get $, you get $.
https://www.ebates.com/r/JASONN464?eeid=28187
I just bought one... was needing a larger cooler, so we'll see how she be.
-
https://www.walmart.com/ip/Lifetime-55-Quart-High-Performance-Cooler-Grey-90820/850043843
55-qt $97
ebates.com has 7% back on sporting goods at walmart, too, so I always try and go through another site (usually ebates & Upromise are the best) to get some extra cash. If you want to sign up for ebates.com, feel free to use this link. I get $, you get $.
https://www.ebates.com/r/JASONN464?eeid=28187
I just bought one... was needing a larger cooler, so we'll see how she be.
Ok... I decided to look at the link since I'd like a new cooler (but we already have ebates)
Find the pics interesting. First, an actual comparison that spells out the testing parameters. Second, an actual pic of what "bear-proof" means (there are several other entertaining pics)
A+, Lifetime marketing team
(https://uploads.tapatalk-cdn.com/20180410/a2431e08080edd514d37d5883c980750.jpg)(https://uploads.tapatalk-cdn.com/20180410/9b6aebeeadda456ba746adfa202eca78.jpg)
Sent from my SM-G955U using Tapatalk
-
https://www.walmart.com/ip/Lifetime-55-Quart-High-Performance-Cooler-Grey-90820/850043843
55-qt $97
ebates.com has 7% back on sporting goods at walmart, too, so I always try and go through another site (usually ebates & Upromise are the best) to get some extra cash. If you want to sign up for ebates.com, feel free to use this link. I get $, you get $.
https://www.ebates.com/r/JASONN464?eeid=28187
I just bought one... was needing a larger cooler, so we'll see how she be.
Ok... I decided to look at the link since I'd like a new cooler (but we already have ebates)
Find the pics interesting. First, an actual comparison that spells out the testing parameters. Second, an actual pic of what "bear-proof" means (there are several other entertaining pics)
A+, Lifetime marketing team
(https://uploads.tapatalk-cdn.com/20180410/a2431e08080edd514d37d5883c980750.jpg)(https://uploads.tapatalk-cdn.com/20180410/9b6aebeeadda456ba746adfa202eca78.jpg)
Sent from my SM-G955U using Tapatalk
Yeah, that test bear has a cool job. #careergoals
Sent from my SM-G950U using Tapatalk
-
Looks like cooler is getting some bear lovin'.
-
https://www.walmart.com/ip/Lifetime-55-Quart-High-Performance-Cooler-Grey-90820/850043843
55-qt $97
ebates.com has 7% back on sporting goods at walmart, too, so I always try and go through another site (usually ebates & Upromise are the best) to get some extra cash. If you want to sign up for ebates.com, feel free to use this link. I get $, you get $.
https://www.ebates.com/r/JASONN464?eeid=28187
I just bought one... was needing a larger cooler, so we'll see how she be.
Ok... I decided to look at the link since I'd like a new cooler (but we already have ebates)
Find the pics interesting. First, an actual comparison that spells out the testing parameters. Second, an actual pic of what "bear-proof" means (there are several other entertaining pics)
A+, Lifetime marketing team
(https://uploads.tapatalk-cdn.com/20180410/a2431e08080edd514d37d5883c980750.jpg)(https://uploads.tapatalk-cdn.com/20180410/9b6aebeeadda456ba746adfa202eca78.jpg)
Sent from my SM-G955U using Tapatalk
I'm surprised Wally World let them put Ozark Trail on there since it's at the bottom of the quality ratings and that's their brand??
-
https://www.walmart.com/ip/Lifetime-55-Quart-High-Performance-Cooler-Grey-90820/850043843
55-qt $97
ebates.com has 7% back on sporting goods at walmart, too, so I always try and go through another site (usually ebates & Upromise are the best) to get some extra cash. If you want to sign up for ebates.com, feel free to use this link. I get $, you get $.
https://www.ebates.com/r/JASONN464?eeid=28187
I just bought one... was needing a larger cooler, so we'll see how she be.
Ok... I decided to look at the link since I'd like a new cooler (but we already have ebates)
Find the pics interesting. First, an actual comparison that spells out the testing parameters. Second, an actual pic of what "bear-proof" means (there are several other entertaining pics)
A+, Lifetime marketing team
(https://uploads.tapatalk-cdn.com/20180410/a2431e08080edd514d37d5883c980750.jpg)(https://uploads.tapatalk-cdn.com/20180410/9b6aebeeadda456ba746adfa202eca78.jpg)
Sent from my SM-G955U using Tapatalk
I'm surprised Wally World let them put Ozark Trail on there since it's at the bottom of the quality ratings and that's their brand??
I'm a little confused by the products being compared & if the pictured WalMart cooler is a different brand ( it looks to be ) from Wallyworld's or not but , for the Ozark to be bottom of the list must mean tht the others are incredible .
I bought the smaller of the two Ozarks for I needed new cooler for this years rides ;after 3days the stuff I left in it from Hale trip was still as cold as when packed. The ice blanket was still frozen. It is heavy but fits as if designed for the JK Unlimited 60/40 rear seat split ( the 40% section behind driver) and is priced way cheaper than even Rtic or Orcas. And it is "bear rated" ( silly) ...just providing further consumer data on the subject.
-
All these overpriced coolers... just buy another bag of ice after a few days. You won't spend that much on ice for the price of a high dollar cooler in a lifetime. //OLDSKOOL//
-
All these overpriced coolers... just buy another bag of ice after a few days. You won't spend that much on ice for the price of a high dollar cooler in a lifetime. //OLDSKOOL//
The only problem with that theory is how far do you have to go for that bag of ice?? Making said bag really expensive.
-
Point noted. I have an old steel cooler. Freeze 2 liters and put in before trips and it will last for days. I only have to buy 1 bag for a 3-4 day trip using block ice.
Sent from my SM-G955U using Tapatalk
-
For y’all with newer rams. Smoking deal on amp steps. Kinda upset they’re not the right ones for my 2015.
https://www.theoutdoorstrader.com/threads/fs-amp-power-step-running-boards-dodge-ram-2016-2017.1694723/
-
Thanks don
Sent from my iPhone using Tapatalk
-
Barrett Parkway Home Depot clearance section
(https://uploads.tapatalk-cdn.com/20180609/d9de5b71451557244b3a5747e06425ee.jpg)
Sent from my iPhone using Tapatalk
-
Hey all
I frequently hit , as I'm sure many do, GenRight's closeout section and this month I noticed some updates in the form of affordable - if used - big ole tars like we all seem to be drawn towards. (https://genright.com/products/used-38-falken-sticky-off-road-tires-set-of-4.html)
It may turn out to be worthless but check-out some of what they have at the closeout section posted today:
https://genright.com/closeout/
[smoke]
-
Hey all
I frequently hit , as I'm sure many do, GenRight's closeout section and this month I noticed some updates in the form of affordable - if used - big ole tars like we all seem to be drawn towards. (https://genright.com/products/used-38-falken-sticky-off-road-tires-set-of-4.html)
It may turn out to be worthless but check-out some of what they have at the closeout section posted today:
https://genright.com/closeout/
[smoke]
Shipping has to be there biggest downside. Their products are top notch and the pricing is usually in line with their competitors, but the shipping is usually double...
Tires can be picked up at our shop in Simi Valley CA or flat rate shipped for $200 each.
-
$200 each is high. [smoke2]
-
Damn what a deal!!!
(https://uploads.tapatalk-cdn.com/20180613/52b6feee2691efb4d8102ae7a169f04c.png)
Sent from my iPhone using Tapatalk
-
Didn’t catch nor consider that, Danny. Good points .
Even GenRight closeout goods cost more than others, heh.
Yeah, that suddenly becomes cost prohibitive for any of us. My bad.
-
Wide open design has Aluminum links 5% off now thru July 4th.
-
There is a Rubicon JK front 44 with 4.10s & E locker for $1750 on CL. Located in Gainesville.
Seemed decent.
-
This seems like a steal for the parts in it alone.
4 seat one ton buggy 5.3 stickies
https://r.tapatalk.com/shareLink?share_fid=32116&share_tid=59194&url=http%3A%2F%2Fwww%2Ehardlinecrawlers%2Ecom%2Fforums%2Findex%2Ephp%3Ftopic%3D59194&share_type=t
-
This seems like a steal for the parts in it alone.
4 seat one ton buggy 5.3 stickies
https://r.tapatalk.com/shareLink?share_fid=32116&share_tid=59194&url=http%3A%2F%2Fwww%2Ehardlinecrawlers%2Ecom%2Fforums%2Findex%2Ephp%3Ftopic%3D59194&share_type=t
Damn. I want that.
-
This seems like a steal for the parts in it alone.
4 seat one ton buggy 5.3 stickies
https://r.tapatalk.com/shareLink?share_fid=32116&share_tid=59194&url=http%3A%2F%2Fwww%2Ehardlinecrawlers%2Ecom%2Fforums%2Findex%2Ephp%3Ftopic%3D59194&share_type=t
Damn. I want that.
Make it happen
-
Damn. I want that.
Make it happen
Gonna see if he will take gift cards.
-
Damn. I want that.
Make it happen
Gonna see if he will take gift cards.
Good luck!!!!
Sent from my iPhone using Tapatalk
-
This seems like a steal for the parts in it alone.
4 seat one ton buggy 5.3 stickies
https://r.tapatalk.com/shareLink?share_fid=32116&share_tid=59194&url=http%3A%2F%2Fwww%2Ehardlinecrawlers%2Ecom%2Fforums%2Findex%2Ephp%3Ftopic%3D59194&share_type=t
I saw that. I agree for the price that’s a nice starting point.
If someone say had a JKU that they sold, after they dropped 15-16k on this they would have lots of money left over for fixes/cleanup work/personalizing it the way you wanted.
-
Subtle
-
Kids are showing interest in coming on more rides and I still like the occasional drive on the road, so that’s not gonna work.
-
This seems like a steal for the parts in it alone.
4 seat one ton buggy 5.3 stickies
https://r.tapatalk.com/shareLink?share_fid=32116&share_tid=59194&url=http%3A%2F%2Fwww%2Ehardlinecrawlers%2Ecom%2Fforums%2Findex%2Ephp%3Ftopic%3D59194&share_type=t
I saw that. I agree for the price that’s a nice starting point.
If someone say had a JKU that they sold, after they dropped 15-16k on this they would have lots of money left over for fixes/cleanup work/personalizing it the way you wanted.
I called him today to discuss it and it’s sold already.
-
This seems like a steal for the parts in it alone.
4 seat one ton buggy 5.3 stickies
https://r.tapatalk.com/shareLink?share_fid=32116&share_tid=59194&url=http%3A%2F%2Fwww%2Ehardlinecrawlers%2Ecom%2Fforums%2Findex%2Ephp%3Ftopic%3D59194&share_type=t
I saw that. I agree for the price that’s a nice starting point.
If someone say had a JKU that they sold, after they dropped 15-16k on this they would have lots of money left over for fixes/cleanup work/personalizing it the way you wanted.
I called him today to discuss it and it’s sold already.
Damn bet he wishes he asked for more hahaha
-
This seems like a steal for the parts in it alone.
4 seat one ton buggy 5.3 stickies
https://r.tapatalk.com/shareLink?share_fid=32116&share_tid=59194&url=http%3A%2F%2Fwww%2Ehardlinecrawlers%2Ecom%2Fforums%2Findex%2Ephp%3Ftopic%3D59194&share_type=t
I saw that. I agree for the price that’s a nice starting point.
If someone say had a JKU that they sold, after they dropped 15-16k on this they would have lots of money left over for fixes/cleanup work/personalizing it the way you wanted.
I called him today to discuss it and it’s sold already.
Damn bet he wishes he asked for more hahaha
Yeah, no kidding. If it was still available I was going to grab my trailer and some cash and drive to Hickory tomorrow to see it. It’s all about timing.
-
$100 at Home Depot
(https://uploads.tapatalk-cdn.com/20180626/e71999c1ca42e4121d6814928fc4a964.jpeg)
-
I have a friend that will be in the market for a dump trailer soon. Just putting some feelers out there. 7x14 (or close) w/ 4' sides.
-
I have a friend that will be in the market for a dump trailer soon. Just putting some feelers out there. 7x14 (or close) w/ 4' sides.
i can hook you up with Homesteader Trailers, the owner is my dads best friend.
-
$100 at Home Depot
(https://uploads.tapatalk-cdn.com/20180626/e71999c1ca42e4121d6814928fc4a964.jpeg)
Finally......an affordable Rubicon!
-
$100 at Home Depot
(https://uploads.tapatalk-cdn.com/20180626/e71999c1ca42e4121d6814928fc4a964.jpeg)
Finally......an affordable Rubicon!
Looks like it has some slight trail damage or possible roll over!!!! Slightly driven off-road from time to time!!!!
Sent from my iPhone using Tapatalk
-
It will buff out.
-
Thought that was @patman for a second. I double checked, it’s not. Way too big for Pat.
-
Thought that was @patman for a second. I double checked, it’s not. Way too big for Pat.
Hood is too straight
-
Thought that was @patman for a second. I double checked, it’s not. Way too big for Pat.
Hood is too straight
Not enough body damage either, but it's off to a good start
-
Thought that was @patman for a second. I double checked, its not. Way too big for Pat.
Decent color gives it away...
-
$100 at Home Depot
(https://uploads.tapatalk-cdn.com/20180626/e71999c1ca42e4121d6814928fc4a964.jpeg)
Finally......an affordable Rubicon!
Looks like it has some slight trail damage or possible roll over!!!! Slightly driven off-road from time to time!!!!
Sent from my iPhone using Tapatalk
nah, it was out on that ride a few weekends back w/ us at Hawk Pride ; that's how freakin hot it was. ;)
-
(https://uploads.tapatalk-cdn.com/20180716/62e2b85725081f6d83b9d0d2623de06a.jpg)
Sent from my SM-G955U using Tapatalk
-
$2k
In my 'hood there is a 2WD 2002 Dodge Ram Quad cab. Baby blue & decent looking.
-
https://atlanta.craigslist.org/atl/ctd/d/2013-jeep-wrangler-rubicon/6634629849.html
It says salvage title. I'm guessing it was hit in the front since the Rubicon stickers are missing.
Still a hell of a deal.
-
https://atlanta.craigslist.org/atl/ctd/d/2013-jeep-wrangler-rubicon/6634629849.html
It says salvage title. I'm guessing it was hit in the front since the Rubicon stickers are missing.
Still a hell of a deal.
Probably has frame damage if it's a salvage.
-
Looks to be rebuilt.
I'd beat it off road, frame damage or not.
-
There’s something not right in the pictures - like the whole thing is twisted a bit. Front bumper is not straight, lower air dam looks like it’s hanging off and rear brake light is busted so I’m going with not rebuilt and using pics not highlighting the damage. Wouldn’t touch it.
-
Radio is a dead giveaway. #1 it's not a rubi. #2 obvious frame damage. body parts twisted and front bumper twisted.
-
Radio has nothing to do if it’s a rubi or not. The 2018 rubi we gave away for CFR had the same radio as in this picture.
Sent from my iPhone using Tapatalk
-
From this pic it looks like it was hit on the right frame rail pushing everything to the left (look at the hood to grill gap bigger on one side). these frames buckle easy but they can be bought cheap and swapped easily.
-
Radio is a dead giveaway. #1 it's not a rubi. #2 obvious frame damage. body parts twisted and front bumper twisted.
It has the locker and swaybar buttons in one of the photos
-
I said it was rebuilt. If it was it was done in my back yard.
If you zoom in some & look at the "Jeep" emblem, the front end seems wonky.
Another obvious thing is the wipers. WTF?
I pride myself on being able to spot a repaired vehicle but this one slipped by me.
I blame the price but also the beer.
I'd still abuse the ever lovin crap out of it.
-
Easy to tell after a little research
(https://farm1.staticflickr.com/914/42578811835_bec7d8cda3_b.jpg) (https://flic.kr/p/27Sxxkr)
-
(https://uploads.tapatalk-cdn.com/20180718/393b5ae45f89a6f1b3db010f32aaffea.png)
Sent from my iPhone using Tapatalk
-
I said it was rebuilt. If it was it was done in my back yard.
If you zoom in some & look at the "Jeep" emblem, the front end seems wonky.
Another obvious thing is the wipers. WTF?
I pride myself on being able to spot a repaired vehicle but this one slipped by me.
I blame the price but also the beer.
I'd still abuse the ever lovin crap out of it.
When wash attendants or auto detailers are ‘ doin their thing’ , if the option exists to flip the wipers up to prevent having to lift at each squeegee pass, you flip em over. Youalso extend blade’s life by wiping UV protectant (303) or rainX , whatever , on the blades ...
brings back teenage memories of my Summer job detailing repo’s for my fathers Savings&Loan office back in the 80s! I always had gas money for my motorcycle [smoke]
-
(https://uploads.tapatalk-cdn.com/20180718/393b5ae45f89a6f1b3db010f32aaffea.png)
Sent from my iPhone using Tapatalk
That guy lives right down the road from one of my stores. Really nice guy. Wish I had the cash for that.
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20180718/393b5ae45f89a6f1b3db010f32aaffea.png)
Sent from my iPhone using Tapatalk
That guy lives right down the road from one of my stores. Really nice guy. Wish I had the cash for that.
Sent from my iPhone using Tapatalk
If I hadn’t spent a ton of money this week I’d buy these and store them until I had the cash to finish them
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20180718/393b5ae45f89a6f1b3db010f32aaffea.png)
Sent from my iPhone using Tapatalk
That guy lives right down the road from one of my stores. Really nice guy. Wish I had the cash for that.
Sent from my iPhone using Tapatalk
Maybe he'll trade for a lifetime supply of sandwiches and cookies?
-
(https://uploads.tapatalk-cdn.com/20180718/393b5ae45f89a6f1b3db010f32aaffea.png)
Sent from my iPhone using Tapatalk
That guy lives right down the road from one of my stores. Really nice guy. Wish I had the cash for that.
Sent from my iPhone using Tapatalk
Maybe he'll trade for a lifetime supply of sandwiches and cookies?
Now that just might work!!!
Sent from my iPhone using Tapatalk
-
Maybe he'll trade for a lifetime supply of sandwiches and cookies?
I'm listening.... [drool]
-
AK47 and Glock19 ???
-
AK47 and Glock19 ???
You'll have to PM Chip via fb... he may be on here actually, I thought i saw him post up before?
-
Maybe he'll trade for a lifetime supply of sandwiches and cookies?
I'm listening.... [drool]
Haha, we could work something out.......
Sent from my iPhone using Tapatalk
-
AK47 and Glock19 ???
You'll have to PM Chip via fb... he may be on here actually, I thought i saw him post up before?
I’m pretty sure he was on here at some point. I think when he was trying to get rid of his JKu rubicon.
Sent from my iPhone using Tapatalk
-
I just sent a note on Facebook messager.....
-
I just sent a note on Facebook messager.....
Yesssss
I was seriously contemplating buying them and trying to think of a place to hide them from my wife...
Sent from my iPhone using Tapatalk
-
I'm not part of that group. Put in a request.
Hope he reads messager.
-
I'm not part of that group. Put in a request.
Hope he reads messager.
I can message him your info if you’d like
Sent from my iPhone using Tapatalk
-
Kevin Pool
770-596-1087
Text is fine
-
Kevin Pool
770-596-1087
Text is fine
Done
Sent from my iPhone using Tapatalk
-
All tou guys who know....that is the right year superduty axles correct?
-
His is one is way to meet a guy who is supposed to buy them.
Said he would let know if the guy doesn't buy. Oh well
-
There is a guy on CL who parts out SD trucks. His price is $1k for front & rear. But that was thru text messages. If you show with cash it might be a better price
You want '05 or newer for pure beef.
I could have swore I saw you post that you'd NEVER go to tons.
-
Trading the guns was my only hope....
-
Formula, diapers and baby stuff ain't cheap
-
HALF PRICE $50
https://shop.advanceautoparts.com/p/gear-wrench-20-piece-ratchet-wrench-set-8920a/10703429-P?searchTerm=Gear+Wrench+Ratcheting
Contents:
1/4 in., 5/16 in., 11/32 in., 3/8 in., 7/16 in., 1/2 in., 9/16 in., 5/8 in., 11/16 in. and 3/4 in.
6, 8, 10, 12, 13, 14, 15, 16, 17, 18 mm
(https://shop.advanceautoparts.com/wcsstore/CVWEB/staticproductimage//N3417/large/10703429_gea_8920a_pri_larg.jpg)
-
Damn good deal! I'm grabbing a set today
-
Before Colorado, I went with this one for my Jeep kit. The carrying bag is nice, and it includes two more wrenches than the one from Advance, but it is a bit more expensive:
https://www.amazon.com/gp/product/B01MT6PDN0/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
-
Before Colorado, I went with this one for my Jeep kit. The carrying bag is nice, and it includes two more wrenches than the one from Advance, but it is a bit more expensive:
https://www.amazon.com/gp/product/B01MT6PDN0/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
I have that set too. Pleased w it
-
Before Colorado, I went with this one for my Jeep kit. The carrying bag is nice, and it includes two more wrenches than the one from Advance, but it is a bit more expensive:
https://www.amazon.com/gp/product/B01MT6PDN0/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
Nice, how is the quality on those? They have a 5* rating, impressive and I like roll ups. I've literally beat on my Gearwrenches and needed another set for the shop at the lake.
Do you have any known fasteners that are 9mm or 9/32″ on the Jeep? I don't recall any on the JK.
-
Before Colorado, I went with this one for my Jeep kit. The carrying bag is nice, and it includes two more wrenches than the one from Advance, but it is a bit more expensive:
https://www.amazon.com/gp/product/B01MT6PDN0/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
Nice, how is the quality on those? I've literally beat on my Gearwrenches and needed another set for the shop at the lake.
Do you have any known fasteners that are 9mm or 9/32″ on the Jeep? I don't recall any on the JK.
I really don't know...Got good ratings and i wanted ratcheting capability.
I have no clue, but I doubt those sizes are needed on my rig.
Sent from my SM-G930V using Tapatalk
-
9mm is a odd caliber..... I mean bolt size.
-
I have used 9/32" on some aftermarket parts but I think I used 9mm one time in my life. That one time was frustrating cause I didn't have that size but was able to do without.
-
Before Colorado, I went with this one for my Jeep kit. The carrying bag is nice, and it includes two more wrenches than the one from Advance, but it is a bit more expensive:
https://www.amazon.com/gp/product/B01MT6PDN0/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
Nice, how is the quality on those? They have a 5* rating, impressive and I like roll ups. I've literally beat on my Gearwrenches and needed another set for the shop at the lake.
Do you have any known fasteners that are 9mm or 9/32″ on the Jeep? I don't recall any on the JK.
I, too, prefer/ like my roll-up which contains Craftsman box wrenches ( originsl ,USA made +decades old )running from 7mm metrics thru 22mm and set of these Gear Wrench ratcheting in all the same sizes. So, I have dupes in ratcheting same as standard boxes. It makes it simple to torque down stuff from both ends.
I embellished the set w/ those odd sizes we need , like the 16mm and some 3/4” or the ever necessary 7/16” and 9/16” and a ground down 13mm and 1/2” box dedicated to unit bearing / brake stuff.
This is a good deal for building a good set of ratchet & box wrenches. I think ( didn’t check) I last saw the GearWrench or Tekton 20 piece metric on Blamazon for 55 to 60bucks?
So, this saves a 10 spot.
(edit: the quality is above average. I hsve one skip occasionally and have only managed to break a 13mm via our leverage trick of using a 2nd box wrench to lengthen the one you’re using ...I stripped it by applying gorilla torque to something like that. )
Oh, I know on my XJ nor my JK that I have not a single nut that would require a 9mm wrench, fwiw.
-
Smoking price on a low mile cummins
https://www.akinsjeepram.com/used-Winder-2016-RAM-2500-SLT-3C6TR5DT4GG378842?_vsrefdom=SM_SEM&utm_source=Facebook_dpa_rtUsed&utm_campaign=FacebookDpaRtUsed&utm_medium=Social
-
Smoking price on a low mile cummins
https://www.akinsjeepram.com/used-Winder-2016-RAM-2500-SLT-3C6TR5DT4GG378842?_vsrefdom=SM_SEM&utm_source=Facebook_dpa_rtUsed&utm_campaign=FacebookDpaRtUsed&utm_medium=Social
Good price on minimalist truck.
-
Smoking price on a low mile cummins
https://www.akinsjeepram.com/used-Winder-2016-RAM-2500-SLT-3C6TR5DT4GG378842?_vsrefdom=SM_SEM&utm_source=Facebook_dpa_rtUsed&utm_campaign=FacebookDpaRtUsed&utm_medium=Social
Good price on minimalist truck.
Description says HEMI......
Sent from my iPhone using Tapatalk
-
It’s badged a HEMI gasser
Sent from my iPhone using Tapatalk
-
They fixed it, was 6.7 earlier, to good to be true.
I'll make somebody a deal on my 17, has 4100 miles on it.
-
They fixed it, was 6.7 earlier, to good to be true.
I'll make somebody a deal on my 17, has 4100 miles on it.
I cant remember, did we make a pool for Doug trying to sell his truck?
-
I’m surprised he’s kept it this long. Figured it would have been gone already.
-
Haven't tried yet, but the cost to buy one now is helping keep the value up.
I really want IFS so I'll go back to Duramax... again.
-
Haven't tried yet, but the cost to buy one now is helping keep the value up.
I really want IFS so I'll go back to Duramax... again.
You "want" IFS? First time I've heard that.
-
Softer ride?
-
Haven't tried yet, but the cost to buy one now is helping keep the value up.
I really want IFS so I'll go back to Duramax... again.
You "want" IFS? First time I've heard that.
On a tow pig? They ride and handle so much better. Would not consider it for the tractor pull on Saturday night!
-
I used this line on the Colorado trip group text a few times — and it fits here as well. You guys are soft!
Crazy to me if you’d sell a truck in order to get IFS for ride quality. 55k miles on my rear leaf sprung 3500 and the ride is fine around town.
Sent from my iPhone using Tapatalk
-
No offence, but with age comes wisdom & the quest for a softer ride.
-
No offence, but with age comes wisdom & the quest for a softer ride.
Haha no offense taken.... but real wisdom would have been buying the truck with the right pillow soft ride the first time! Lol
Sent from my iPhone using Tapatalk
-
No offence, but with age comes wisdom & the quest for a softer ride.
Haha no offense taken.... but real wisdom would have been buying the truck with the right pillow soft ride the first time! Lol
Sent from my iPhone using Tapatalk
I guess when your butt is calibrated for a fluffy pillow ride ‘84 astrovan, no diesel will compare.
-
No offence, but with age comes wisdom & the quest for a softer ride.
Haha no offense taken.... but real wisdom would have been buying the truck with the right pillow soft ride the first time! Lol
True if that was the only metric.
I usually try to only make financial decisions on vehicles and not comfort or emotional decisions, except on jeeps of course lol.
-
No offence, but with age comes wisdom & the quest for a softer ride.
I know alot of old dumb asses. Maybe it's me tho
Sent from my SM-G960U using Tapatalk
-
No offence, but with age comes wisdom & the quest for a softer ride.
I know alot of old dumb asses. Maybe it's me tho
Sent from my SM-G960U using Tapatalk
Just imagine if you had met them in their 20's. Lol
-
Haven't tried yet, but the cost to buy one now is helping keep the value up.
I really want IFS so I'll go back to Duramax... again.
I will make you a deal on mine.
07 duramax
Cold AC
IFS
Multiple owners
Just getting broken in
Would let it go for a low, low price of $39,999.
-
Would let it go for a low, low price of $39,999.
Pretty sure you meant $39,998.71... GLWS
Sent from my iPhone using Tapatalk
-
Haven't tried yet, but the cost to buy one now is helping keep the value up.
I really want IFS so I'll go back to Duramax... again.
I will make you a deal on mine.
07 duramax
Cold AC
IFS
Multiple owners
Just getting broken in
Would let it go for a low, low price of $39,999.
Pretty sure you meant $39,998.71... GLWS
Sent from my iPhone using Tapatalk
Good catch. I was leaving some wiggle room for negotiation.
-
Haven't tried yet, but the cost to buy one now is helping keep the value up.
I really want IFS so I'll go back to Duramax... again.
I will make you a deal on mine.
07 duramax
Cold AC
IFS
Multiple owners
Just getting broken in
Would let it go for a low, low price of $39,999.
Pretty sure you meant $39,998.71... GLWS
Sent from my iPhone using Tapatalk
Good catch. I was leaving some wiggle room for negotiation.
Can I borrow it?
-
No offence, but with age comes wisdom & the quest for a softer ride.
I know alot of old dumb asses. Maybe it's me tho
Sent from my SM-G960U using Tapatalk
I know a lot of young smart asses tooooo
-
Haven't tried yet, but the cost to buy one now is helping keep the value up.
I really want IFS so I'll go back to Duramax... again.
I will make you a deal on mine.
07 duramax
Cold AC
IFS
Multiple owners
Just getting broken in
Would let it go for a low, low price of $39,999.
Pretty sure you meant $39,998.71... GLWS
Sent from my iPhone using Tapatalk
Good catch. I was leaving some wiggle room for negotiation.
Can I borrow it?
Anytime man!
-
(https://uploads.tapatalk-cdn.com/20180731/496e8385a199c0d465c2e7845409f8f3.png)just popped up on JKO forum. Not sure how to post a link on Tapatalk.
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20180731/8f4da20cb1f536c9f28afa5b455c8eea.png)from Facebook. Incase someone’s looking for an AW4. Not sure if it’s a good price, but thought I saw some of y’all talking about liking them.
Sent from my iPhone using Tapatalk
-
Good price but it's not a '97. It's a '96 or older.
-
https://m.facebook.com/groups/483659951677887?view=permalink&id=1910389369004931(https://uploads.tapatalk-cdn.com/20180731/72b604a78f66889224c81e98d4554c41.jpg)
Sent from my SM-G955U using Tapatalk
-
If I didn’t have that damn Land Rover holding me down, I’d be all over this (https://uploads.tapatalk-cdn.com/20180802/2cf2b75c38ddd01f0354ee54e20a2462.png)
Sent from my iPhone using Tapatalk
-
If I didn’t have that damn Land Rover holding me down, I’d be all over this (https://uploads.tapatalk-cdn.com/20180802/2cf2b75c38ddd01f0354ee54e20a2462.png)
Sent from my iPhone using Tapatalk
Damn so would I!
I wounder if it was a northern jeep with more than "usual" rust though. If the running gear and body were solid I guess you could buy a used frame to replace it.
-
If I didn’t have that damn Land Rover holding me down, I’d be all over this (https://uploads.tapatalk-cdn.com/20180802/2cf2b75c38ddd01f0354ee54e20a2462.png)
Sent from my iPhone using Tapatalk
Damn so would I!
I wounder if it was a northern jeep with more than "usual" rust though. If the running gear and body were solid I guess you could buy a used frame to replace it.
I saw this but was concern about “frame rust repairable”. WTF
-
If I didn’t have that damn Land Rover holding me down, I’d be all over this (https://uploads.tapatalk-cdn.com/20180802/2cf2b75c38ddd01f0354ee54e20a2462.png)
Sent from my iPhone using Tapatalk
Damn so would I!
I wounder if it was a northern jeep with more than "usual" rust though. If the running gear and body were solid I guess you could buy a used frame to replace it.
I saw this but was concern about “frame rust repairable”. WTF
Just put some POR on it...good as new.
-
Four 42/15/16.5 swamper tsl for 800 bucks. They look lightly used.
https://atlanta.craigslist.org/sat/pts/d/super-swamper-tsl-42-mud-tire/6638886799.html
-
2003 f250 dana 60 for 300.
https://knoxville.craigslist.org/pts/d/2003-f250-dana-60-front-axle/6654402273.html
-
If anyone wants to copy Sam, this may give you a good start(https://uploads.tapatalk-cdn.com/20180821/324fe42b84f56f39cfb6e2e3b6668db6.jpg)
Sent from my SM-G955U using Tapatalk
-
If anyone wants to copy Sam, this may give you a good start(https://uploads.tapatalk-cdn.com/20180821/324fe42b84f56f39cfb6e2e3b6668db6.jpg)
Sent from my SM-G955U using Tapatalk
thats a killer deal for $3500
-
https://www.facebook.com/marketplace/item/316112085825865/
-
https://www.facebook.com/marketplace/item/316112085825865/
Over under on what it actually sells for?
-
https://www.facebook.com/marketplace/item/316112085825865/
Over under on what it actually sells for?
I'd bet on being parted out
Sent from my SM-G955U using Tapatalk
-
https://www.facebook.com/marketplace/item/316112085825865/
Over under on what it actually sells for?
$65k
-
https://www.facebook.com/marketplace/item/316112085825865/
Over under on what it actually sells for?
$65k
60k. It does have a ripp after all. I do like those seats though
Sent from my iPhone using Tapatalk
-
55-60k. What do you guys think he's in on that jeep? 90k?
-
55-60k. What do you guys think he's in on that jeep? 90k?
I was joking by saying the ripp actually takes value away. I just don’t see the value in a used 4 door
Sent from my iPhone using Tapatalk
-
55-60k. What do you guys think he's in on that jeep? 90k?
I was joking by saying the ripp actually takes value away. I just don’t see the value in a used 4 door
Sent from my iPhone using Tapatalk
Yeah a used 4dr JK with engine mods is the worst... lmao
-
Now this might be worthwhile for someone to talk to him about!
https://www.facebook.com/marketplace/item/208781163115657/
-
Now this might be worthwhile for someone to talk to him about!
https://www.facebook.com/marketplace/item/208781163115657/
Damn!
-
That has TcDawg all over that with the new LJ and V8
Sent from my iPhone using Tapatalk
-
That has TcDawg all over that with the new LJ and V8
Sent from my iPhone using Tapatalk
I like Treps
Sent from my iPhone using Tapatalk
Me too.
Me three.
Don’t be a bitch Tony, take em
I think these posts were actually meant for this thread... [excited] [excited]
-
Another SurburbaMax
https://www.autotrader.com/cars-for-sale/vehicledetails.xhtml?listingId=480375861&zip=30319&referrer=%2Fcars-for-sale%2Fsearchresults.xhtml%3Fzip%3D30319%26fuelTypeGroup%3DDSL%26startYear%3D1981%26sortBy%3DderivedpriceDESC%26incremental%3Dall%26firstRecord%3D0%26endYear%3D2019%26modelCodeList%3DCHEVSUB%26makeCodeList%3DCHEV%26searchRadius%3D0&startYear=1981&numRecords=25&firstRecord=0&endYear=2019&modelCodeList=CHEVSUB&makeCodeList=CHEV&searchRadius=0&makeCode1=CHEV&modelCode1=CHEVSUB
-
Pretty sweet military/Jeep trailer
Military Trailer M105A3
https://atlanta.craigslist.org/nat/tro/d/military-trailer-m105a3/6678940971.html
(https://uploads.tapatalk-cdn.com/20180824/7902a34d3ba8b0b68f41aec3ee284a29.png)
Sent from my iPhone using Tapatalk
-
Pretty sweet military/Jeep trailer
Military Trailer M105A3
https://atlanta.craigslist.org/nat/tro/d/military-trailer-m105a3/6678940971.html
(https://uploads.tapatalk-cdn.com/20180824/7902a34d3ba8b0b68f41aec3ee284a29.png)
Sent from my iPhone using Tapatalk
I like the trailer but I'd really like to find a 1948-1958 Jeep that woulda been pullin that trailer back then; I have recently decided that I want to acquire and build an early CJ2 into a crawler. They're hard to locate these days.
-
Why not build the XJ?
-
Why not build the XJ?
trust me, I have thought long and hard +many times about it; the daughter, Cadence, that you maybe haven't met yet ( she has come on every GaTR ride I have been on this year except Golden)is a really good kid, responsible and loves Jeeps. She turns 15 next year & since she was 5 has been sayin," I get Cherry when I start drivin'.." which I guess her Mom or I told her years ago.
If that scenario changes, I already have frame stiffeners and axles picked out, heh.
-
I dunno how the rebuild title affects it, but the thing sure looks amazing to me. If I had the money, I would snag this SUPER low mileage sweety in a flash ; LJs, particularly rare, limited run flavors like this, are rarer and rarer...remember when these would go for , like, $6k-$9k?
https://nashville.craigslist.org/cto/d/2005-jeep-wrangler-rubicon/6678209536.html
-
I dunno how the rebuild title affects it, but the thing sure looks amazing to me. If I had the money, I would snag this SUPER low mileage sweety in a flash ; LJs, particularly rare, limited run flavors like this, are rarer and rarer...remember when these would go for , like, $6k-$9k?
https://nashville.craigslist.org/cto/d/2005-jeep-wrangler-rubicon/6678209536.html
Someone is ready to cross some serious ice cracks. I'd be interested, if it were $10K or less.
-
I dunno how the rebuild title affects it, but the thing sure looks amazing to me. If I had the money, I would snag this SUPER low mileage sweety in a flash ; LJs, particularly rare, limited run flavors like this, are rarer and rarer...remember when these would go for , like, $6k-$9k?
https://nashville.craigslist.org/cto/d/2005-jeep-wrangler-rubicon/6678209536.html
Someone is ready to cross some serious ice cracks. I'd be interested, if it were $10K or less.
About all it’s worth. The limited production doesn’t mean squat if it’s not 100% original. Just another overpriced LJR
-
$10K is what an LJR with 32k miles is going for these days? Or its what you think it should go for these days. Two different things...
-
$10K is what an LJR with 32k miles is going for these days? Or its what you think it should go for these days. Two different things...
My research says they are actually selling, with those miles, for $14kish. That is relatively stock. And that price would be a "good" deal. They list for more but seem to come down to the 14 to 15k range.
-
$10K is what an LJR with 32k miles is going for these days? Or its what you think it should go for these days. Two different things...
Rebuilt title. $15k tops. C’mon, I’m trying to drive down the value of LJ’s so I can buy one LOL
Plus you’d replace most of the driveline.
-
Haha, my bad, Mike.
-
It's not an ljr, is it. I saw a Sahara sticker somewhere on it
Sent from my SM-G930V using Tapatalk
-
It's not an ljr, is it. I saw a Sahara sticker somewhere on it
Sent from my SM-G930V using Tapatalk
Rubicon Sahara. Special model for one year.
-
It's not an ljr, is it. I saw a Sahara sticker somewhere on it
Sent from my SM-G930V using Tapatalk
Rubicon Sahara. Special, over priced model for one year.
Better?
-
It's not an ljr, is it. I saw a Sahara sticker somewhere on it
Sent from my SM-G930V using Tapatalk
Rubicon Sahara. Special, over priced model for one year.
Better?
Obviously!!! It’s a two word name instead of one.......
Sent from my iPhone using Tapatalk
-
But seriously, there is a 1 ton XJ on Hardline for $4500.
W TF?
Where's my shit??
-
$10K is what an LJR with 32k miles is going for these days? Or its what you think it should go for these days. Two different things...
Rebuilt title. $15k tops. C’mon, I’m trying to drive down the value of LJ’s so I can buy one LOL
Plus you’d replace most of the driveline.
lmao
i have been doin' that all week, also; just after seein Tony's new rig briefly, suddenly all TJs on tons look more b*d*ss and I have been hunting online to see what I can find...
nah [smoke]
-
C’mon, I’m trying to drive down the value of LJ’s so I can buy one LOL
I knew it!
Sent from my Pixel 2 XL using Tapatalk
-
I read it too.
-
$10K is what an LJR with 32k miles is going for these days? Or its what you think it should go for these days. Two different things...
My research says they are actually selling, with those miles, for $14kish. That is relatively stock. And that price would be a "good" deal. They list for more but seem to come down to the 14 to 15k range.
plus, there's that sticker beside the cig lighter port.
It's indicating the Jeep is limited.
Like.....not unlimited.
;)
-
as I post this it occiurs to me that I highly doubt there'd be any interest on this forum for a set of tires w/ these specs but, still; this IS the 'good deal thread' & it seems like if I needed 46", heavy tires , this price would be of interest to me , so...fwiw:
https://nashville.craigslist.org/wto/d/goodyear-mt-mud-tiresr20-46/6649463638.html
-
as I post this it occiurs to me that I highly doubt there'd be any interest on this forum for a set of tires w/ these specs but, still; this IS the 'good deal thread' & it seems like if I needed 46", heavy tires , this price would be of interest to me , so...fwiw:
https://nashville.craigslist.org/wto/d/goodyear-mt-mud-tiresr20-46/6649463638.html
Ever seen an xj on 46's? lol
-
as I post this it occiurs to me that I highly doubt there'd be any interest on this forum for a set of tires w/ these specs but, still; this IS the 'good deal thread' & it seems like if I needed 46", heavy tires , this price would be of interest to me , so...fwiw:
https://nashville.craigslist.org/wto/d/goodyear-mt-mud-tiresr20-46/6649463638.html
Ever seen an xj on 46's? lol
no sir
(https://i.imgur.com/mwyD37k.png?2)
-
Not a XJ, but I'd have it.
-
(https://uploads.tapatalk-cdn.com/20180828/520c7a0c13cf41653ac5c52ea17cfb50.jpg)
Sent from my iPhone using Tapatalk
-
as I post this it occiurs to me that I highly doubt there'd be any interest on this forum for a set of tires w/ these specs but, still; this IS the 'good deal thread' & it seems like if I needed 46", heavy tires , this price would be of interest to me , so...fwiw:
https://nashville.craigslist.org/wto/d/goodyear-mt-mud-tiresr20-46/6649463638.html
Ever seen an xj on 46's? lol
no sir
(https://i.imgur.com/mwyD37k.png?2)
Iceland? Some cool builds out there
-
as I post this it occiurs to me that I highly doubt there'd be any interest on this forum for a set of tires w/ these specs but, still; this IS the 'good deal thread' & it seems like if I needed 46", heavy tires , this price would be of interest to me , so...fwiw:
https://nashville.craigslist.org/wto/d/goodyear-mt-mud-tiresr20-46/6649463638.html
Ever seen an xj on 46's? lol
no sir
(https://i.imgur.com/mwyD37k.png?2)
Iceland? Some cool builds out there
yeah, they build those monsterous, floatation-oriented,ice-rigs. I think 46" is one of the smaller size tires for those dudes.
-
?????????
https://www.facebook.com/marketplace/item/266768297292850
-
?????????
https://www.facebook.com/marketplace/item/266768297292850
Thought about those for my tj
Sent from my SM-G935V using Tapatalk
-
For you JK guys wanting to jump ship.
http://www.hardlinecrawlers.com/forums/index.php?topic=59148.0
-
For you JK guys wanting to jump ship.
http://www.hardlinecrawlers.com/forums/index.php?topic=59148.0
holy mother of....
I sorta wanna keep in the Jeep fam and have pssgr seat (for Cadence) but I can't NOT inquire about that thing.
-
Down in Florida. No ac or heat so probably needs a little work
(https://uploads.tapatalk-cdn.com/20180831/d73d2df801d36f6a41cdb2096701a518.png)
Sent from my iPhone using Tapatalk
-
Link to ad?
-
Link to ad?
https://www.facebook.com/marketplace/item/255126431801466/
Sent from my iPhone using Tapatalk
-
179k miles.... no overdrive also, plan on lots of work.
-
179k miles.... no overdrive also, plan on lots of work.
Sounds like a good candidate for a V8
Sent from my iPhone using Tapatalk
-
179k miles.... no overdrive also, plan on lots of work.
Sounds like a good candidate for a V8
Sent from my iPhone using Tapatalk
Hmmmmm. Might have to work up a project sheet.
-
179k miles.... no overdrive also, plan on lots of work.
Sounds like a good candidate for a V8
Sent from my iPhone using Tapatalk
Hmmmmm. Might have to work up a project sheet.
I messaged him. Considering driving it back up if it would make the trip since I’m already down here
Sent from my iPhone using Tapatalk
-
179k miles.... no overdrive also, plan on lots of work.
Sounds like a good candidate for a V8
Sent from my iPhone using Tapatalk
Hmmmmm. Might have to work up a project sheet.
Do it...
Sent from my SM-G955U using Tapatalk
-
You don't need overdrive or heat or AC to wheel!
Sounds trail ready!
Dooooooo it!
-
179k miles.... no overdrive also, plan on lots of work.
Sounds like a good candidate for a V8
Sent from my iPhone using Tapatalk
Hmmmmm. Might have to work up a project sheet.
It’s about an hour away from me right now. Might go look at it tomorrow if it’s raining. Anything in particular I should look for on these?
Sent from my iPhone using Tapatalk
-
For you JK guys wanting to jump ship.
http://www.hardlinecrawlers.com/forums/index.php?topic=59148.0
holy mother of....
I sorta wanna keep in the Jeep fam and have pssgr seat (for Cadence) but I can't NOT inquire about that thing.
She's gonna have her own rig.
-
179k miles.... no overdrive also, plan on lots of work.
Sounds like a good candidate for a V8
Sent from my iPhone using Tapatalk
Buy my Hesco balancer and drop in a AW4....
-
179k miles.... no overdrive also, plan on lots of work.
Sounds like a good candidate for a V8
Sent from my iPhone using Tapatalk
Hmmmmm. Might have to work up a project sheet.
It’s about an hour away from me right now. Might go look at it tomorrow if it’s raining. Anything in particular I should look for on these?
Sent from my iPhone using Tapatalk
Frame rot
-
For you JK guys wanting to jump ship.
http://www.hardlinecrawlers.com/forums/index.php?topic=59148.0
The ride quality in a rock bouncer is usually pretty rough; they're not made for all-day trail riding.
-
179k miles.... no overdrive also, plan on lots of work.
Sounds like a good candidate for a V8
Sent from my iPhone using Tapatalk
Hmmmmm. Might have to work up a project sheet.
It’s about an hour away from me right now. Might go look at it tomorrow if it’s raining. Anything in particular I should look for on these?
Sent from my iPhone using Tapatalk
Just because it's in FL doesn't mean it didn't spend 10 years in New York or Wisconsin in salt winters. Check the frame and all panels.
-
179k miles.... no overdrive also, plan on lots of work.
Sounds like a good candidate for a V8
Sent from my iPhone using Tapatalk
Hmmmmm. Might have to work up a project sheet.
It’s about an hour away from me right now. Might go look at it tomorrow if it’s raining. Anything in particular I should look for on these?
Sent from my iPhone using Tapatalk
Just because it's in FL doesn't mean it didn't spend 10 years in New York or Wisconsin in salt winters. Check the frame and all panels.
The ad states no rust. The ad is on the internet, so...
Sent from my SM-G930V using Tapatalk
-
Definitely look in the back and under the seats for panties that have been thrown in... even a high-mileage, stock LJ can have this.
-
Definitely look in the back and under the seats for panties that have been thrown in... even a high-mileage, stock LJ can have this.
True!
Sent from my Pixel 2 XL using Tapatalk
-
Definitely look in the back and under the seats for panties that have been thrown in... even a high-mileage, stock LJ can have this.
True!
Sent from my Pixel 2 XL using Tapatalk
Lol especially a high mile LJ.
Loan value should be enough to add tons.
-
Definitely look in the back and under the seats for panties that have been thrown in... even a high-mileage, stock LJ can have this.
True!
Sent from my Pixel 2 XL using Tapatalk
Lol especially a high mile LJ.
Loan value should be enough to add tons.
Depending on which part of Florida those could cause excessive body wear also.
Never thought I'd see the day LJs cheap as XJs....
-
So made an appointment to go see it this evening and he just messaged me and said he got an offer for well over asking and took it
Sent from my iPhone using Tapatalk
-
So made an appointment to go see it this evening and he just messaged me and said he got an offer for well over asking and took it
Sent from my iPhone using Tapatalk
@BigMike is a stone cold baller!
-
179k miles.... no overdrive also, plan on lots of work.
Sounds like a good candidate for a V8
Sent from my iPhone using Tapatalk
Hmmmmm. Might have to work up a project sheet.
I have one.
It’s Jared’s build thread.
-
179k miles.... no overdrive also, plan on lots of work.
Sounds like a good candidate for a V8
Sent from my iPhone using Tapatalk
Hmmmmm. Might have to work up a project sheet.
I have one.
It’s Jared’s build thread.
winning
-
179k miles.... no overdrive also, plan on lots of work.
Sounds like a good candidate for a V8
Sent from my iPhone using Tapatalk
Hmmmmm. Might have to work up a project sheet.
I have one.
It’s Jared’s build thread.
Awesomeness
-
Craftsman tool sale this weekend
https://www.sears.com/tools/b-1020000
-
I’ve heard that LQK is doing 40% off through Monday at pick ur parts. If that’s the case I might have to go find a few more SD d60’s.
Sent from my iPhone using Tapatalk
-
I’ve heard that LQK is doing 40% off through Monday at pick ur parts. If that’s the case I might have to go find a few more SD d60’s.
Sent from my iPhone using Tapatalk
Put them up in the FS section
Sent from my iPhone using Tapatalk
-
I’ve heard that LQK is doing 40% off through Monday at pick ur parts. If that’s the case I might have to go find a few more SD d60’s.
Sent from my iPhone using Tapatalk
I'd buy one.
-
Not a great deal but I know people there. Text sales manager buddy for best price without the ugly wheels and put the stockers back on. My neighbor is looking for a TJ mall crawler to drive around. Had two small daughters that want dad to buy a Jeep. Good on him.
https://www.palmerdodgegeorgia.com/used/Jeep/2006-Jeep-Wrangler-Roswell-GA-53ab48ba0a0e0adf224e678d048ecbea.htm
-
Not a great deal but I know people there. Text sales manager buddy for best price without the ugly wheels and put the stockers back on. My neighbor is looking for a TJ mall crawler to drive around. Had two small daughters that want dad to buy a Jeep. Good on him.
https://www.palmerdodgegeorgia.com/used/Jeep/2006-Jeep-Wrangler-Roswell-GA-53ab48ba0a0e0adf224e678d048ecbea.htm
25k for a stock TJ? Lol
-
Not a great deal but I know people there. Text sales manager buddy for best price without the ugly wheels and put the stockers back on. My neighbor is looking for a TJ mall crawler to drive around. Had two small daughters that want dad to buy a Jeep. Good on him.
https://www.palmerdodgegeorgia.com/used/Jeep/2006-Jeep-Wrangler-Roswell-GA-53ab48ba0a0e0adf224e678d048ecbea.htm
25k for a stock TJ? Lol
Is this the "banana up the tailpipe" thread...Holy cow.
Sent from my SM-G930V using Tapatalk
-
Not a great deal but I know people there. Text sales manager buddy for best price without the ugly wheels and put the stockers back on. My neighbor is looking for a TJ mall crawler to drive around. Had two small daughters that want dad to buy a Jeep. Good on him.
https://www.palmerdodgegeorgia.com/used/Jeep/2006-Jeep-Wrangler-Roswell-GA-53ab48ba0a0e0adf224e678d048ecbea.htm
25k for a stock TJ? Lol
Is this the "banana up the tailpipe" thread...Holy cow.
Sent from my SM-G930V using Tapatalk
Like I said, not a good deal at the $22k price. Checking rock bottom price.
-
Whoa.
https://www.rubitrux.com/2017-jeep-wrangler-unlimited-aev-brute-double-cab-6-4-hemi-conversion-black-586283.html
Sent from my iPhone using Tapatalk
-
(https://i.imgflip.com/2h9u1b.jpg)
-
(https://i.imgflip.com/2h9u1b.jpg)
Or something from CL
-
(https://i.imgflip.com/2h9u1b.jpg)
Or something from CL
No appreciation for the rare deal.
-
was that rare or raw deal?
-
(2) 14” & (2) 16” ORI Struts
https://r.tapatalk.com/shareLink?share_fid=4267&share_tid=2666428&url=https%3A%2F%2Fwww%2Epirate4x4%2Ecom%2Fforum%2Fshowthread%2Ephp%3Ft%3D2666428&share_type=t
Sent from my iPhone using Tapatalk
-
https://m.facebook.com/groups/208454209324301?view=permalink&id=1018417641661283
This is a point and shoot rig, very easy and extremely fun to drive. This is a fresh build only been out a few times. It's ready for action and built to take abuse. Low miles- no leaks of any sort. Fires up and goes anywhere.
Jeep Wrangler 93k miles
Cold AC hot heater
4.0 6 cylinder, 5 speed NV3550 transmission, NV241OR Roctrac Transfer Case 4.1 ratio. It has the factory dash, gauges and center console, Acura RSX seats with harness belts
Stretched to 112" wheelbase, 40" Goodyear MTR Kevlar stickie compound tires with beadlocks
2" .120 Dom cage tied into frame
Dana 60 kin pin front with PSC full hydro steering high steer knuckles lock out hubs, long arm 4 link with Fabtech Dirt Logic 2.5 Coilovers remote reservoirs
Sterling 10.25 with truss/gusset, long arm 4 link
Both axles have Yukon 5.38 gears and locked up.
$12,500
575-635-2263 clean title in my name
Jeep is located in Las Cruces New Mexico
Willing to deliver*
Trades for Tacoma quad cab 4x4
-
On the off chance that someone is interested in some interco super swampers, My buddy that sells tires, took some back and is looking to move them.
15x35x15.50
Hardly any miles on them. You can still see the tits.
PM me and I can send pictures.
He is asking 1,000 and that is negotiable.
Pretty wide tires, so I don't expect much interest, but figured I would put it out there anyway.
-
https://m.facebook.com/groups/208454209324301?view=permalink&id=1018417641661283
This is a point and shoot rig, very easy and extremely fun to drive. This is a fresh build only been out a few times. It's ready for action and built to take abuse. Low miles- no leaks of any sort. Fires up and goes anywhere.
Jeep Wrangler 93k miles
Cold AC hot heater
4.0 6 cylinder, 5 speed NV3550 transmission, NV241OR Roctrac Transfer Case 4.1 ratio. It has the factory dash, gauges and center console, Acura RSX seats with harness belts
Stretched to 112" wheelbase, 40" Goodyear MTR Kevlar stickie compound tires with beadlocks
2" .120 Dom cage tied into frame
Dana 60 kin pin front with PSC full hydro steering high steer knuckles lock out hubs, long arm 4 link with Fabtech Dirt Logic 2.5 Coilovers remote reservoirs
Sterling 10.25 with truss/gusset, long arm 4 link
Both axles have Yukon 5.38 gears and locked up.
$12,500
575-635-2263 clean title in my name
Jeep is located in Las Cruces New Mexico
Willing to deliver*
Trades for Tacoma quad cab 4x4
I saw today. Needs rear coilovers and redesign the dorky looking cage. Great deal though. Could justbwheel the snot out of it as is.
-
https://m.facebook.com/groups/208454209324301?view=permalink&id=1018417641661283
This is a point and shoot rig, very easy and extremely fun to drive. This is a fresh build only been out a few times. It's ready for action and built to take abuse. Low miles- no leaks of any sort. Fires up and goes anywhere.
Jeep Wrangler 93k miles
Cold AC hot heater
4.0 6 cylinder, 5 speed NV3550 transmission, NV241OR Roctrac Transfer Case 4.1 ratio. It has the factory dash, gauges and center console, Acura RSX seats with harness belts
Stretched to 112" wheelbase, 40" Goodyear MTR Kevlar stickie compound tires with beadlocks
2" .120 Dom cage tied into frame
Dana 60 kin pin front with PSC full hydro steering high steer knuckles lock out hubs, long arm 4 link with Fabtech Dirt Logic 2.5 Coilovers remote reservoirs
Sterling 10.25 with truss/gusset, long arm 4 link
Both axles have Yukon 5.38 gears and locked up.
$12,500
575-635-2263 clean title in my name
Jeep is located in Las Cruces New Mexico
Willing to deliver*
Trades for Tacoma quad cab 4x4
I saw today. Needs rear coilovers and redesign the dorky looking cage. Great deal though. Could justbwheel the snot out of it as is.
For 12k I think it's a great place to start. Wheel as-is or add coilovers
-
https://m.facebook.com/groups/208454209324301?view=permalink&id=1018417641661283
This is a point and shoot rig, very easy and extremely fun to drive. This is a fresh build only been out a few times. It's ready for action and built to take abuse. Low miles- no leaks of any sort. Fires up and goes anywhere.
Jeep Wrangler 93k miles
Cold AC hot heater
4.0 6 cylinder, 5 speed NV3550 transmission, NV241OR Roctrac Transfer Case 4.1 ratio. It has the factory dash, gauges and center console, Acura RSX seats with harness belts
Stretched to 112" wheelbase, 40" Goodyear MTR Kevlar stickie compound tires with beadlocks
2" .120 Dom cage tied into frame
Dana 60 kin pin front with PSC full hydro steering high steer knuckles lock out hubs, long arm 4 link with Fabtech Dirt Logic 2.5 Coilovers remote reservoirs
Sterling 10.25 with truss/gusset, long arm 4 link
Both axles have Yukon 5.38 gears and locked up.
$12,500
575-635-2263 clean title in my name
Jeep is located in Las Cruces New Mexico
Willing to deliver*
Trades for Tacoma quad cab 4x4
I saw today. Needs rear coilovers and redesign the dorky looking cage. Great deal though. Could justbwheel the snot out of it as is.
For 12k I think it's a great place to start. Wheel as-is or add coilovers
Agree completely.
-
https://m.facebook.com/groups/208454209324301?view=permalink&id=1018417641661283
This is a point and shoot rig, very easy and extremely fun to drive. This is a fresh build only been out a few times. It's ready for action and built to take abuse. Low miles- no leaks of any sort. Fires up and goes anywhere.
Jeep Wrangler 93k miles
Cold AC hot heater
4.0 6 cylinder, 5 speed NV3550 transmission, NV241OR Roctrac Transfer Case 4.1 ratio. It has the factory dash, gauges and center console, Acura RSX seats with harness belts
Stretched to 112" wheelbase, 40" Goodyear MTR Kevlar stickie compound tires with beadlocks
2" .120 Dom cage tied into frame
Dana 60 kin pin front with PSC full hydro steering high steer knuckles lock out hubs, long arm 4 link with Fabtech Dirt Logic 2.5 Coilovers remote reservoirs
Sterling 10.25 with truss/gusset, long arm 4 link
Both axles have Yukon 5.38 gears and locked up.
$12,500
575-635-2263 clean title in my name
Jeep is located in Las Cruces New Mexico
Willing to deliver*
Trades for Tacoma quad cab 4x4
I saw today. Needs rear coilovers and redesign the dorky looking cage. Great deal though. Could justbwheel the snot out of it as is.
For 12k I think it's a great place to start. Wheel as-is or add coilovers
Or buy and leave out west for wheeling out there... Does Jared have storage in CO? ;-)
-
It's times like these that I regret canceling Facebook...I can't see it!
Sent from my SM-G930V using Tapatalk
-
https://m.facebook.com/groups/208454209324301?view=permalink&id=1018417641661283
This is a point and shoot rig, very easy and extremely fun to drive. This is a fresh build only been out a few times. It's ready for action and built to take abuse. Low miles- no leaks of any sort. Fires up and goes anywhere.
Jeep Wrangler 93k miles
Cold AC hot heater
4.0 6 cylinder, 5 speed NV3550 transmission, NV241OR Roctrac Transfer Case 4.1 ratio. It has the factory dash, gauges and center console, Acura RSX seats with harness belts
Stretched to 112" wheelbase, 40" Goodyear MTR Kevlar stickie compound tires with beadlocks
2" .120 Dom cage tied into frame
Dana 60 kin pin front with PSC full hydro steering high steer knuckles lock out hubs, long arm 4 link with Fabtech Dirt Logic 2.5 Coilovers remote reservoirs
Sterling 10.25 with truss/gusset, long arm 4 link
Both axles have Yukon 5.38 gears and locked up.
$12,500
575-635-2263 clean title in my name
Jeep is located in Las Cruces New Mexico
Willing to deliver*
Trades for Tacoma quad cab 4x4
I saw today. Needs rear coilovers and redesign the dorky looking cage. Great deal though. Could justbwheel the snot out of it as is.
For 12k I think it's a great place to start. Wheel as-is or add coilovers
Or ORI's lol
Sent from my SM-G928V using Tapatalk
-
It's times like these that I regret canceling Facebook...I can't see it!
Sent from my SM-G930V using Tapatalk
Link don't work anyway. You are not missing anything.
-
It's times like these that I regret canceling Facebook...I can't see it!
Sent from my SM-G930V using Tapatalk
Link don't work anyway. You are not missing anything.
Link works. Just have to be in the group i linked to
(https://uploads.tapatalk-cdn.com/20180906/fa98356e520bfb5eea30d78ee2010f63.jpg)(https://uploads.tapatalk-cdn.com/20180906/83e81c5be4d7c1f58f6a0936652df130.jpg)
Sent from my SM-G955U using Tapatalk
-
https://m.facebook.com/groups/208454209324301?view=permalink&id=1018417641661283
This is a point and shoot rig, very easy and extremely fun to drive. This is a fresh build only been out a few times. It's ready for action and built to take abuse. Low miles- no leaks of any sort. Fires up and goes anywhere.
Jeep Wrangler 93k miles
Cold AC hot heater
4.0 6 cylinder, 5 speed NV3550 transmission, NV241OR Roctrac Transfer Case 4.1 ratio. It has the factory dash, gauges and center console, Acura RSX seats with harness belts
Stretched to 112" wheelbase, 40" Goodyear MTR Kevlar stickie compound tires with beadlocks
2" .120 Dom cage tied into frame
Dana 60 kin pin front with PSC full hydro steering high steer knuckles lock out hubs, long arm 4 link with Fabtech Dirt Logic 2.5 Coilovers remote reservoirs
Sterling 10.25 with truss/gusset, long arm 4 link
Both axles have Yukon 5.38 gears and locked up.
$12,500
575-635-2263 clean title in my name
Jeep is located in Las Cruces New Mexico
Willing to deliver*
Trades for Tacoma quad cab 4x4
I saw today. Needs rear coilovers and redesign the dorky looking cage. Great deal though. Could justbwheel the snot out of it as is.
For 12k I think it's a great place to start. Wheel as-is or add coilovers
Or ORI's lol
Sent from my SM-G928V using Tapatalk
What's the difference? Is one better than the other?
-
I clicked on the link. It said the link is broken or deleted. My bad Patrick.
-
I clicked on the link. It said the link is broken or deleted. My bad Patrick.
Interesting...
Sent from my SM-G955U using Tapatalk
-
https://m.facebook.com/groups/208454209324301?view=permalink&id=1018417641661283
This is a point and shoot rig, very easy and extremely fun to drive. This is a fresh build only been out a few times. It's ready for action and built to take abuse. Low miles- no leaks of any sort. Fires up and goes anywhere.
Jeep Wrangler 93k miles
Cold AC hot heater
4.0 6 cylinder, 5 speed NV3550 transmission, NV241OR Roctrac Transfer Case 4.1 ratio. It has the factory dash, gauges and center console, Acura RSX seats with harness belts
Stretched to 112" wheelbase, 40" Goodyear MTR Kevlar stickie compound tires with beadlocks
2" .120 Dom cage tied into frame
Dana 60 kin pin front with PSC full hydro steering high steer knuckles lock out hubs, long arm 4 link with Fabtech Dirt Logic 2.5 Coilovers remote reservoirs
Sterling 10.25 with truss/gusset, long arm 4 link
Both axles have Yukon 5.38 gears and locked up.
$12,500
575-635-2263 clean title in my name
Jeep is located in Las Cruces New Mexico
Willing to deliver*
Trades for Tacoma quad cab 4x4
I saw today. Needs rear coilovers and redesign the dorky looking cage. Great deal though. Could justbwheel the snot out of it as is.
For 12k I think it's a great place to start. Wheel as-is or add coilovers
Or ORI's lol
Sent from my SM-G928V using Tapatalk
What's the difference? Is one better than the other?
Well.....it all depends on how the watchyamacallit connects to the domahickey and how the angle of that thing ties in.
Sent from my SM-G928V using Tapatalk
-
@BigPrince Check out what I found on Facebook Marketplace. https://www.facebook.com/marketplace/item/2153130885013438/ (https://www.facebook.com/marketplace/item/2153130885013438/)
-
@BigPrince Check out what I found on Facebook Marketplace. https://www.facebook.com/marketplace/item/2153130885013438/ (https://www.facebook.com/marketplace/item/2153130885013438/)
When do you pick it up?
-
@BigPrince Check out what I found on Facebook Marketplace. https://www.facebook.com/marketplace/item/2153130885013438/ (https://www.facebook.com/marketplace/item/2153130885013438/)
When do you pick it up?
Needs coilovers or maybe ORIs
Sent from my iPhone using Tapatalk
-
@BigPrince Check out what I found on Facebook Marketplace. https://www.facebook.com/marketplace/item/2153130885013438/ (https://www.facebook.com/marketplace/item/2153130885013438/)
When do you pick it up?
Needs coilovers or maybe ORIs
Sent from my iPhone using Tapatalk
Is one better than the other?
-
Who's next?
http://www.hardlinecrawlers.com/forums/index.php?topic=59618.0
-
Who's next?
http://www.hardlinecrawlers.com/forums/index.php?topic=59618.0
Seems to be priced about right
Sent from my SM-G928V using Tapatalk
-
Who's next?
http://www.hardlinecrawlers.com/forums/index.php?topic=59618.0
Seems to be priced about right
Sent from my SM-G928V using Tapatalk
@BigMike have you called them yet?
-
Who's next?
http://www.hardlinecrawlers.com/forums/index.php?topic=59618.0
Seems to be priced about right
Sent from my SM-G928V using Tapatalk
@BigMike have you called them yet?
some reading for you @BigMike
https://www.pirate4x4.com/tech/billavista/60_front/index.html
get learned on the Dodge 60's
-
Who's next?
http://www.hardlinecrawlers.com/forums/index.php?topic=59618.0
Seems to be priced about right
Sent from my SM-G928V using Tapatalk
@BigMike have you called them yet?
some reading for you @BigMike
https://www.pirate4x4.com/tech/billavista/60_front/index.html
get learned on the Dodge 60's
I can’t remember why but weren’t the dodge 60s less desirable for some reason?
-
Who's next?
http://www.hardlinecrawlers.com/forums/index.php?topic=59618.0
Seems to be priced about right
Sent from my SM-G928V using Tapatalk
@BigMike have you called them yet?
some reading for you @BigMike
https://www.pirate4x4.com/tech/billavista/60_front/index.html
get learned on the Dodge 60's
I can’t remember why but weren’t the dodge 60s less desirable for some reason?
It also looks like the jeep has a driver side drop Dodge 60 in in it vs the older passenger side drop. I think the Dodge 60s are all low pinion.
Sent from my Pixel 2 XL using Tapatalk
-
Who's next?
http://www.hardlinecrawlers.com/forums/index.php?topic=59618.0
Seems to be priced about right
Sent from my SM-G928V using Tapatalk
@BigMike have you called them yet?
some reading for you @BigMike
https://www.pirate4x4.com/tech/billavista/60_front/index.html
get learned on the Dodge 60's
I can’t remember why but weren’t the dodge 60s less desirable for some reason?
It also looks like the jeep has a driver side drop Dodge 60 in in it vs the older passenger side drop. I think the Dodge 60s are all low pinion.
Sent from my Pixel 2 XL using Tapatalk
Dodge
1975-89 D-600
1992-93 D-600
1981-89 D-700
1992-93 D-700
All these Dodge versions were passenger side differential, regular rotation (low pinion) gears, disc brakes, 35 spline inners, 30 spline outers, and kingpin knuckles. 1979-89 versions had external style hubs, with the earlier versions with full-time NP203 Transfer cases having external drive flanges, and later models having external lockout hubs. The external lockout hub bolt pattern is 8 x 3.960". The 90-93 versions had internal style hubs just like the Chevy and lockout hubs. One caution with dodge applications, is you have to be careful to avoid the Dana 61 front axle. 1987-88 and 1991-93.5 Dodge D600 and D700 also came with Dana 61.
Undesirable Years: 94+ Dodge drivers side low pinion CAD unit bearing hub 32 spline 1.31” coil sprung Dana 60s
-
My TJ has what is supposed to be a Dodge D60 front, driver drop. Not sure what's so undesirable about it. In any case it's not a unit bearing axle, so I assume it's has been converted.
-
My TJ has what is supposed to be a Dodge D60 front, driver drop. Not sure what's so undesirable about it. In any case it's not a unit bearing axle, so I assume it's has been converted.
That's just it right there. If you were going to build up an axle the dodge's might not be best choice. But, if some already went through and converted the outers over to the Ford/Chevy stuff you should be fine.
Sent from my SM-G928V using Tapatalk
-
Who's next?
http://www.hardlinecrawlers.com/forums/index.php?topic=59618.0
Seems to be priced about right
Sent from my SM-G928V using Tapatalk
Did you call em yet?
You could put a truck or scrambler body on it.
-
Who's next?
http://www.hardlinecrawlers.com/forums/index.php?topic=59618.0
Seems to be priced about right
Sent from my SM-G928V using Tapatalk
@BigMike have you called them yet?
some reading for you @BigMike
https://www.pirate4x4.com/tech/billavista/60_front/index.html
get learned on the Dodge 60's
Thanks Tony and Pat
Sent from my iPhone using Tapatalk
-
Who's next?
http://www.hardlinecrawlers.com/forums/index.php?topic=59618.0
and then he posts this...
Thanks guys ;D I'd trade for a JK 4 Door. Can't get my Great Dane in the LJ anymore.
-
Who's next?
http://www.hardlinecrawlers.com/forums/index.php?topic=59618.0
Seems to be priced about right
Sent from my SM-G928V using Tapatalk
Did you call em yet?
You could put a truck or scrambler body on it.
If I was going to buy something today it would probably be this:
https://r.tapatalk.com/shareLink?url=http%3A%2F%2Fwww%2Ehardlinecrawlers%2Ecom%2Fforums%2Findex%2Ephp%3Ftopic%3D59577%2E0&share_tid=59577&share_fid=32116&share_type=t
Sent from my SM-G928V using Tapatalk
-
this thread has turned from a craigslist good deal to. if u got 20-50k burning a hole in ur pocket heres something to buy. geshhh. go back to posting crap that i can afford. ;)
-
this thread has turned from a craigslist good deal to. if u got 20-50k burning a hole in ur pocket heres something to buy. geshhh. go back to posting crap that i can afford. ;)
Didnt know there was a price cap on good deals
-
If I was going to buy something today it would probably be this:
https://r.tapatalk.com/shareLink?url=http%3A%2F%2Fwww%2Ehardlinecrawlers%2Ecom%2Fforums%2Findex%2Ephp%3Ftopic%3D59577%2E0&share_tid=59577&share_fid=32116&share_type=t
Sent from my SM-G928V using Tapatalk
Yup, I agree. I PM'd the seller on 9/6/18 and have heard nothing back.
-
My TJ has what is supposed to be a Dodge D60 front, driver drop. Not sure what's so undesirable about it. In any case it's not a unit bearing axle, so I assume it's has been converted.
That's just it right there. If you were going to build up an axle the dodge's might not be best choice. But, if some already went through and converted the outers over to the Ford/Chevy stuff you should be fine.
Sent from my SM-G928V using Tapatalk
I texted the guy and he sent pics but didn't awswer my questions. What year Dodge did the axle come out of and what brand springs and shocks. You can see,that it has ball joints and not king pins.
Price is good but needs coilovers and cage to start.
(https://uploads.tapatalk-cdn.com/20180913/c2b36c1ac8e0f1b59417917cb86b5ff0.jpg)
(https://uploads.tapatalk-cdn.com/20180913/2053983c60c492b42aa7e2094c8fdcf2.jpg)
(https://uploads.tapatalk-cdn.com/20180913/5ff6ded9cbb8c3ed92c1cb2488653dff.jpg)
(https://uploads.tapatalk-cdn.com/20180913/78aa10c8dc1e348e2815a309e6a3eb8d.jpg)
Sent from my iPhone using Tapatalk
-
200k miles. Add to the list an LS, 4L60E, Atlas.
-
My TJ has what is supposed to be a Dodge D60 front, driver drop. Not sure what's so undesirable about it. In any case it's not a unit bearing axle, so I assume it's has been converted.
That's just it right there. If you were going to build up an axle the dodge's might not be best choice. But, if some already went through and converted the outers over to the Ford/Chevy stuff you should be fine.
Sent from my SM-G928V using Tapatalk
I texted the guy and he sent pics but didn't awswer my questions. What year Dodge did the axle come out of and what brand springs and shocks. You can see,that it has ball joints and not king pins.
Price is good but needs coilovers and cage to start.
(https://uploads.tapatalk-cdn.com/20180913/2053983c60c492b42aa7e2094c8fdcf2.jpg)
Sent from my iPhone using Tapatalk
and maybe get rid of that janky, single-shear on both ends ram setup. that is scary lookin...rest looks clean enough
-
This one is cheap enough
https://r.tapatalk.com/shareLink?url=http%3A%2F%2Fwww%2Ehardlinecrawlers%2Ecom%2Fforums%2Findex%2Ephp%3Ftopic%3D59629%2E0&share_tid=59629&share_fid=32116&share_type=t
Sent from my SM-G928V using Tapatalk
-
This one is cheap enough
https://r.tapatalk.com/shareLink?url=http%3A%2F%2Fwww%2Ehardlinecrawlers%2Ecom%2Fforums%2Findex%2Ephp%3Ftopic%3D59629%2E0&share_tid=59629&share_fid=32116&share_type=t
Sent from my SM-G928V using Tapatalk
I agree.
I've been thinking do I sail mine & get something like that or just throw a set of tons under mine.
-
This one is cheap enough
https://r.tapatalk.com/shareLink?url=http%3A%2F%2Fwww%2Ehardlinecrawlers%2Ecom%2Fforums%2Findex%2Ephp%3Ftopic%3D59629%2E0&share_tid=59629&share_fid=32116&share_type=t
Sent from my SM-G928V using Tapatalk
I agree.
I've been thinking do I sail mine & get something like that or just throw a set of tons under mine.
I predict a quick sale on this one. $5k, maybe even get for a little less and it's teady to beat on.
Sent from my SM-G928V using Tapatalk
-
This one is cheap enough
https://r.tapatalk.com/shareLink?url=http%3A%2F%2Fwww%2Ehardlinecrawlers%2Ecom%2Fforums%2Findex%2Ephp%3Ftopic%3D59629%2E0&share_tid=59629&share_fid=32116&share_type=t
Sent from my SM-G928V using Tapatalk
I agree.
I've been thinking do I sail mine & get something like that or just throw a set of tons under mine.
Trade the bus!
-
This one is cheap enough
https://r.tapatalk.com/shareLink?url=http%3A%2F%2Fwww%2Ehardlinecrawlers%2Ecom%2Fforums%2Findex%2Ephp%3Ftopic%3D59629%2E0&share_tid=59629&share_fid=32116&share_type=t
Sent from my SM-G928V using Tapatalk
I agree.
I've been thinking do I sail mine & get something like that or just throw a set of tons under mine.
Trade the bus!
On one hand I'd like to get it out of the yard but on the other hand we'd miss it.
-
This one is cheap enough
https://r.tapatalk.com/shareLink?url=http%3A%2F%2Fwww%2Ehardlinecrawlers%2Ecom%2Fforums%2Findex%2Ephp%3Ftopic%3D59629%2E0&share_tid=59629&share_fid=32116&share_type=t
Sent from my SM-G928V using Tapatalk
This , I like very much.
-
This one is cheap enough
https://r.tapatalk.com/shareLink?url=http%3A%2F%2Fwww%2Ehardlinecrawlers%2Ecom%2Fforums%2Findex%2Ephp%3Ftopic%3D59629%2E0&share_tid=59629&share_fid=32116&share_type=t
Sent from my SM-G928V using Tapatalk
This , I like very much.
wow Thats a good deal.
-
Looks purdy(https://uploads.tapatalk-cdn.com/20180917/6ee8af781787a2b40ad48e337886805b.jpg)(https://uploads.tapatalk-cdn.com/20180917/0e280ca518f8bb67e8d9cef991670e30.jpg)(https://uploads.tapatalk-cdn.com/20180917/291800505062ee6c2a639c8366c1b58b.jpg)
Sent from my SM-G955U using Tapatalk
-
Looks purdy(https://uploads.tapatalk-cdn.com/20180917/6ee8af781787a2b40ad48e337886805b.jpg)(https://uploads.tapatalk-cdn.com/20180917/0e280ca518f8bb67e8d9cef991670e30.jpg)(https://uploads.tapatalk-cdn.com/20180917/291800505062ee6c2a639c8366c1b58b.jpg)
Sent from my SM-G955U using Tapatalk
that is maybe 10 miles tops distance from me. Sweet!
-
Looks purdy(https://uploads.tapatalk-cdn.com/20180917/6ee8af781787a2b40ad48e337886805b.jpg)(https://uploads.tapatalk-cdn.com/20180917/0e280ca518f8bb67e8d9cef991670e30.jpg)(https://uploads.tapatalk-cdn.com/20180917/291800505062ee6c2a639c8366c1b58b.jpg)
Sent from my SM-G955U using Tapatalk
that is maybe 10 miles tops distance from me. Sweet!
Well... go buy it
-
Damn Clarke. Did you wash it?
-
Damn Clarke. Did you wash it?
Lol
Sent from my SM-G955U using Tapatalk
-
$8,500 LJ local
-
^^ With a hardtop. That's about as good a deal as you'll likely find for unmodified, clean title (assuming). Its exactly what I paid for mine and I looked for a while.
-
I think that one just makes you think about buying built vs buying and building.
-
I messaged her. Lots of interest already. Hot heat/cold AC. She's taking a look at the common rust spots.
I just don't know if I could bring myself to cut up or beat on a clean LJ like that
-
I messaged her. Lots of interest already. Hot heat/cold AC. She's taking a look at the common rust spots.
I just don't know if I could bring myself to cut up or beat on a clean LJ like that
She say mileage, auto or manual, any known goods or bads?
-
I messaged her. Lots of interest already. Hot heat/cold AC. She's taking a look at the common rust spots.
I just don't know if I could bring myself to cut up or beat on a clean LJ like that
She say mileage, auto or manual, any known goods or bads?
162k, auto (rebuilt 10 months ago), ac replaced 7 months ago, no issues she knows of. She’s checking the common rust areas for me
Sent from my iPhone using Tapatalk
-
I just don't see it @ $30k.
http://www.hardlinecrawlers.com/forums/index.php?topic=59650.0
-
I just don't see it @ $30k.
http://www.hardlinecrawlers.com/forums/index.php?topic=59650.0
no one does
It has been off and on for sale for a year. I talked to him 6 months or so ago. Tried working a trade, didn't work. Back then he wanted closer to $40K I think.
-
I just don't see it @ $30k.
http://www.hardlinecrawlers.com/forums/index.php?topic=59650.0
no one does
It has been off and on for sale for a year. I talked to him 6 months or so ago. Tried working a trade, didn't work. Back then he wanted closer to $40K I think.
$22k - $25k with a V8 would be about right.
Sent from my SM-G928V using Tapatalk
-
I just don't see it @ $30k.
http://www.hardlinecrawlers.com/forums/index.php?topic=59650.0
no one does
It has been off and on for sale for a year. I talked to him 6 months or so ago. Tried working a trade, didn't work. Back then he wanted closer to $40K I think.
$22k - $25k with a V8 would be about right.
Sent from my SM-G928V using Tapatalk
maybe about "right" at what youd like to pay, but not gonna happen.
-
I just don't see it @ $30k.
http://www.hardlinecrawlers.com/forums/index.php?topic=59650.0
Horrible ad after horrible ad. I’ve looked at hundreds of rigs in the last month. Lack of details, lack of pictures, rigs not 110% detailed. If you’re asking top dollar, make damn sure you have a top ad and clean rig. It’s got an LS, well show a picture with a spotless engine bay. Hardly any ads with interior pics.
I’m still on the fence and if I make the move, I’m going to sell my rig first. Before it goes for sale, new roll bar pad (faded), new muffler (dented), new glovebox, cheaper to install a Tuffy (scratch in old one), I’ve already detailed the undercarriage and working bottom up to ensure it shows perfectly. That is how to attract buyers and gain interest.
-
I messaged her. Lots of interest already. Hot heat/cold AC. She's taking a look at the common rust spots.
I just don't know if I could bring myself to cut up or beat on a clean LJ like that
She say mileage, auto or manual, any known goods or bads?
162k, auto (rebuilt 10 months ago), ac replaced 7 months ago, no issues she knows of. She’s checking the common rust areas for me
Sent from my iPhone using Tapatalk
I’ve got him down to 8k. It’s been repainted (single stage). Couple of little things but nothing that would effect it as a trail rig
Sent from my iPhone using Tapatalk
-
I messaged her. Lots of interest already. Hot heat/cold AC. She's taking a look at the common rust spots.
I just don't know if I could bring myself to cut up or beat on a clean LJ like that
She say mileage, auto or manual, any known goods or bads?
162k, auto (rebuilt 10 months ago), ac replaced 7 months ago, no issues she knows of. She’s checking the common rust areas for me
Sent from my iPhone using Tapatalk
I’ve got him down to 8k. It’s been repainted (single stage). Couple of little things but nothing that would effect it as a trail rig
Sent from my iPhone using Tapatalk
are you going to get it today?
-
I messaged her. Lots of interest already. Hot heat/cold AC. She's taking a look at the common rust spots.
I just don't know if I could bring myself to cut up or beat on a clean LJ like that
She say mileage, auto or manual, any known goods or bads?
162k, auto (rebuilt 10 months ago), ac replaced 7 months ago, no issues she knows of. She’s checking the common rust areas for me
Sent from my iPhone using Tapatalk
I’ve got him down to 8k. It’s been repainted (single stage). Couple of little things but nothing that would effect it as a trail rig
Sent from my iPhone using Tapatalk
are you going to get it today?
I’m on the fence.
Sent from my iPhone using Tapatalk
-
I messaged her. Lots of interest already. Hot heat/cold AC. She's taking a look at the common rust spots.
I just don't know if I could bring myself to cut up or beat on a clean LJ like that
She say mileage, auto or manual, any known goods or bads?
162k, auto (rebuilt 10 months ago), ac replaced 7 months ago, no issues she knows of. She’s checking the common rust areas for me
Sent from my iPhone using Tapatalk
I’ve got him down to 8k. It’s been repainted (single stage). Couple of little things but nothing that would effect it as a trail rig
Sent from my iPhone using Tapatalk
are you going to get it today?
I’m on the fence.
Sent from my iPhone using Tapatalk
Just do it!!!
Even if it means sacrificing everything......
Sent from my iPhone using Tapatalk
-
Nice LJ
-
Nice LJ
Been waiting on one like that. Not ready yet.
Sent from my iPhone using Tapatalk
-
I just saw that BTF has their TJ front cage tie-ins on sale if anyone is interested.
https://www.bluetorchfab.com/collections/cage-kits/products/btf-jeep-tj-cage-dash-tie-in-kit#
-
I just saw that BTF has their TJ front cage tie-ins on sale if anyone is interested.
https://www.bluetorchfab.com/collections/cage-kits/products/btf-jeep-tj-cage-dash-tie-in-kit#
Wow
That’s a good deal
I bought Motobilt about a month ago, same design. Paid $50 more than that sale price.
-
@Jeeptrk
-
I have a friend that purchased a TJ about 7 or 8 years ago, took it out once and had LARGE plans for it.
Needless to say, life got in the way and he is looking to just unload it.
He has it priced really cheap if anyone wants to put it together.
2001 just under 100k miles
6cyl auto
Leaf spring suspension
Dana 44 front, 5:38 gears, unknown locker
Ford 9" rear, 5:38 gears, unknown locker
300 T-case
39.5 Super Swamper tires
Stretched
All the armor plating you could need
cage
Winch
Hydraulic assist
Custom headlights and other lighting
1/2 doors, tailgate, hood all sitting in the floor
Here are some photos. If you have any questions, PM me and I'll share the contact info.
These are my photos that I took last night at his place. Located in East Ridge
12,500 as it sits.
(https://farm2.staticflickr.com/1974/31327279288_b8bd362305_b.jpg) (https://flic.kr/p/PJhuGY)20181008_144428 (https://flic.kr/p/PJhuGY) by thetastelingers (https://www.flickr.com/photos/44961217@N02/), on Flickr
(https://farm2.staticflickr.com/1940/45201516921_2ec74bf663_b.jpg) (https://flic.kr/p/2bSiAbD)20181008_144437 (https://flic.kr/p/2bSiAbD) by thetastelingers (https://www.flickr.com/photos/44961217@N02/), on Flickr
(https://farm2.staticflickr.com/1927/31327278898_3b17024bdd_b.jpg) (https://flic.kr/p/PJhuAf)20181008_144449 (https://flic.kr/p/PJhuAf) by thetastelingers (https://www.flickr.com/photos/44961217@N02/), on Flickr
(https://farm2.staticflickr.com/1937/45201516511_ee148aa1a2_b.jpg) (https://flic.kr/p/2bSiA4z)20181008_144604 (https://flic.kr/p/2bSiA4z) by thetastelingers (https://www.flickr.com/photos/44961217@N02/), on Flickr
(https://farm2.staticflickr.com/1923/45201516261_ffb87a6e9e_b.jpg) (https://flic.kr/p/2bSizZg)20181008_144621 (https://flic.kr/p/2bSizZg) by thetastelingers (https://www.flickr.com/photos/44961217@N02/), on Flickr
(https://farm2.staticflickr.com/1976/43388111550_fb4d480816_b.jpg) (https://flic.kr/p/2974pWN)20181008_144724 (https://flic.kr/p/2974pWN) by thetastelingers (https://www.flickr.com/photos/44961217@N02/), on Flickr
-
A leaf sprung TJ? //spank//
-
A leaf sprung TJ? //spank//
Yeah I was shaking my head at that, but I didn't build it. LOL
-
Those are some sad pictures, but a pretty good deal overall
-
Motobilt is offering 10% off everything on the website today since they closed for the storm.
Use discount code "Motocane"
-
Motobilt is offering 10% off everything on the website today since they closed for the storm.
Use discount code "Motocane"
You taking advantage of the sale to speed up your diff cover project? lol
-
Motobilt is offering 10% off everything on the website today since they closed for the storm.
Use discount code "Motocane"
You taking advantage of the sale to speed up your diff cover project? lol
I thought about it haha
-
FYI.
-
FYI.
Nice 👍
-
FYI.
Interesting
-
FYI.
Interesting
Yes it is.
-
FYI.
Interesting
Yes it is.
Only way I will ever go out west again
Sent from my iPhone using Tapatalk
-
FYI.
Interesting
All fun and games till he tells you to put the lotion on the skin.
Sent from my iPhone using Tapatalk
-
I had some buddies who did this a few years ago. Much better than spending 20 hours driving
-
Funny ad
https://atlanta.craigslist.org/nat/cto/d/jeep-wrangler-unlimited/6711356216.html
-
Random internet advertisement.... I guess as long as the vehicle gets there and not a chop shop. Next thing will be taking candy from strangers.
-
Funny ad
https://atlanta.craigslist.org/nat/cto/d/jeep-wrangler-unlimited/6711356216.html
LMAO
Sent from my iPhone using Tapatalk
-
FYI.
Damn that a good guy to know
-
Funny ad
https://atlanta.craigslist.org/nat/cto/d/jeep-wrangler-unlimited/6711356216.html
"I spilled my Sprite." lmao
-
Anyone need a gooseneck trailer? There is one across the street from my subdivision. I can send nudes,..... uhm.. pics.
-
No but I need a hitch trailer
Send nudes anyways
Sent from my iPhone using Tapatalk
-
Anyone need a gooseneck trailer? There is one across the street from my subdivision. I can send nudes,..... uhm.. pics.
Interested in info. Please no nudes.
-
Anyone need a gooseneck trailer? There is one across the street from my subdivision. I can send nudes,..... uhm.. pics.
Interested in info. Please no nudes.
Fine. PM me your cell #.
I'll text them to you.
-
Anyone need a gooseneck trailer? There is one across the street from my subdivision. I can send nudes,..... uhm.. pics.
Interested in info. Please no nudes.
You’re definitely getting nudes
-
No but I need a hitch trailer
Send nudes anyways
Sent from my iPhone using Tapatalk
Weren't you wanting a steel deck?
-
No but I need a hitch trailer
Send nudes anyways
Sent from my iPhone using Tapatalk
Weren't you wanting a steel deck?
Is that some keep-it-on-the-down-low slang for a type of nude pics?? You people are sick! lol
-
No but I need a hitch trailer
Send nudes anyways
Sent from my iPhone using Tapatalk
Weren't you wanting a steel deck?
No that wasn’t me
Sent from my iPhone using Tapatalk
-
No but I need a hitch trailer
Send nudes anyways
Sent from my iPhone using Tapatalk
Weren't you wanting a steel deck?
No that wasn’t me
Sent from my iPhone using Tapatalk
Ok.
There is a wood deck, 18 foot with dove tail on The Outdoor Trader for $2k. It has 6 lug axles. I tried to copy/paste but my phone won't do that for some reason.
-
No but I need a hitch trailer
Send nudes anyways
Sent from my iPhone using Tapatalk
Weren't you wanting a steel deck?
No that wasn’t me
Sent from my iPhone using Tapatalk
Ok.
There is a wood deck, 18 foot with dove tail on The Outdoor Trader for $2k. It has 6 lug axles. I tried to copy/paste but my phone won't do that for some reason.
Thanks for the heads up!
Sent from my iPhone using Tapatalk
-
I've been hot and heavy for the last week or two looking for a trailer. I've missed out on a couple good deals but will get one soon enough... I saw that one you were talking about @Big Dave and there is another across from hwy 52 that could be had cheap. But it needs more TLC than I am want.
-
I've been hot and heavy for the last week or two looking for a trailer. I've missed out on a couple good deals but will get one soon enough... I saw that one you were talking about @Big Dave and there is another across from hwy 52 that could be had cheap. But it needs more TLC than I am want.
Just be careful with used trailers. Never know about bearings, axles, hubs, and the age of the tires. You could save money and end up spending the money saved fixing the used one.
Rode by Country Boy trailers yesterday, surprised to see them flying the old GA flag. Loved it!
-
I've been hot and heavy for the last week or two looking for a trailer. I've missed out on a couple good deals but will get one soon enough... I saw that one you were talking about @Big Dave and there is another across from hwy 52 that could be had cheap. But it needs more TLC than I am want.
Just be careful with used trailers. Never know about bearings, axles, hubs, and the age of the tires. You could save money and end up spending the money saved fixing the used one.
Rode by Country Boy trailers yesterday, surprised to see them flying the old GA flag. Loved it!
definitely possible. but with a minuscule amount of research and a thorough inspection money can be saved.
-
Back on topic...
Heres a killer deal on a Rubihara. 1 of 1000 made
https://boston.craigslist.org/sob/cto/d/05-unlimited-rubicon-khaki-4wd/6713959219.html
-
I've been hot and heavy for the last week or two looking for a trailer. I've missed out on a couple good deals but will get one soon enough... I saw that one you were talking about @Big Dave and there is another across from hwy 52 that could be had cheap. But it needs more TLC than I am want.
Just be careful with used trailers. Never know about bearings, axles, hubs, and the age of the tires. You could save money and end up spending the money saved fixing the used one.
Rode by Country Boy trailers yesterday, surprised to see them flying the old GA flag. Loved it!
Mike is right.
My trailer was $1k. I drove almost 2 hours to get it. Looked at it in the dark.
I spent $760 on brand new 5200# Dexter brake axles/springs, $350 on new tires/wheels, $85 on lug nuts & wiring. Add 8 hours of labor to if it you're not Pat. Lol.
Still cheaper than the trailers I found at the time.
-
I've been hot and heavy for the last week or two looking for a trailer. I've missed out on a couple good deals but will get one soon enough... I saw that one you were talking about @Big Dave and there is another across from hwy 52 that could be had cheap. But it needs more TLC than I am want.
Just be careful with used trailers. Never know about bearings, axles, hubs, and the age of the tires. You could save money and end up spending the money saved fixing the used one.
Rode by Country Boy trailers yesterday, surprised to see them flying the old GA flag. Loved it!
Mike is right.
My trailer was $1k. I drove almost 2 hours to get it. Looked at it in the dark.
I spent $760 on brand new 5200# Dexter brake axles/springs, $350 on new tires/wheels, $85 on lug nuts & wiring. Add 8 hours of labor to if it you're not Pat. Lol.
Still cheaper than the trailers I found at the time.
Yep, at $1k it's worth the risk. The trailers out there that are 8 years old and someone wants $600 less than a new one, I'm buying new. Send me a link to another $1k trailer though!
Sent from my iPhone using Tapatalk
-
Back on topic...
Heres a killer deal on a Rubihara. 1 of 1000 made
https://boston.craigslist.org/sob/cto/d/05-unlimited-rubicon-khaki-4wd/6713959219.html
Dang, that’s a good lookin’ LJ. Nice start and has a cage too.
-
Back on topic...
Heres a killer deal on a Rubihara. 1 of 1000 made
https://boston.craigslist.org/sob/cto/d/05-unlimited-rubicon-khaki-4wd/6713959219.html
Dang, that’s a good lookin’ LJ. Nice start and has a cage too.
But it's in Boston. I'd climb under it & make sure there was no rust.
-
But it's in Boston. I'd climb under it & make sure there was no rust.
I didn’t even check the location, but good call.
-
3500 axles, 1 with brakes (https://uploads.tapatalk-cdn.com/20181016/477ad33776e68c0c6d3fd574c9f87a4b.jpg)
Sent from my SM-G955U using Tapatalk
-
https://www.theoutdoorstrader.com/threads/fs-ft-18ft-dovetail-trailer.1796786/
-
https://www.theoutdoorstrader.com/threads/fs-ft-18ft-dovetail-trailer.1796786/
FYI - it’s a 2007 and looks like it was stored outside
-
https://www.theoutdoorstrader.com/threads/fs-ft-18ft-dovetail-trailer.1796786/
FYI - it’s a 2007 and looks like it was stored outside
I’m going out in a limb here....but 9 out of 10 trailers are likely stored outside.
Brand new trailers are stored outside.
-
https://www.theoutdoorstrader.com/threads/fs-ft-18ft-dovetail-trailer.1796786/
FYI - it’s a 2007 and looks like it was stored outside
I’m going out in a limb here....but 9 out of 10 trailers are likely stored outside.
Brand new trailers are stored outside.
Sorry my point was it sounded like it’s in need of some work. Didn’t seem like as good of a deal as it appeared
Sent from my iPhone using Tapatalk
-
you guys got these emails/notices for Artec Ind yesterday, right?
I believe it is an ongoing liquidation since earlier in Summer + I am not sure how many of these closeout, or discontinued items there'd be interest in but significant savings on some odd and misc parts from Artie & CO seems worth sharin if you havent:
http://www.artecindustries.com/LIQUIDATION
...& there is a link on there stating there's a Facebook only https://www.facebook.com/groups/artecgaragesale/ for scratch-and-dent or other items
-
Might could talk them down on this one a little. Not a bad price though...
https://atlanta.craigslist.org/atl/cto/d/2005-jeep-wrangler-unlimited/6738234912.html
-
Wonder what they’re covering up with the corner armor. Seems like a random upgrade for that stock LJ.
Sent from my iPhone using Tapatalk
-
Wonder what they’re covering up with the corner armor. Seems like a random upgrade for that stock LJ.
Sent from my iPhone using Tapatalk
Agreed.
Plus, theyre new-is just one rear view photo but 3 interior / cruddy stereo pix?
This maybe speculatin’ on nuthin , but she wears all the signs of a rear-ender ...it’d be worth checking into, tho.
-
Think I would rather have something like this [slammin]
(https://farm5.staticflickr.com/4852/45629435712_dcab69518a_z.jpg) (https://flic.kr/p/2cw7MwQ)
(https://farm5.staticflickr.com/4816/45680175401_c62ddf47ff_z.jpg) (https://flic.kr/p/2cAAQF4)
-
Think I would rather have something like this [slammin]
(https://farm5.staticflickr.com/4852/45629435712_dcab69518a_z.jpg) (https://flic.kr/p/2cw7MwQ)
(https://farm5.staticflickr.com/4816/45680175401_c62ddf47ff_z.jpg) (https://flic.kr/p/2cAAQF4)
KILLER! I would rather you have something like that too!
-
Artec added a lot more items to their Liquidation sale.
http://www.artecindustries.com/body_armor_tjlj
Sent from my iPhone using Tapatalk Pro
-
Artec added a lot more items to their Liquidation sale.
http://www.artecindustries.com/body_armor_tjlj
Sent from my iPhone using Tapatalk Pro
Wow. Good deals right there
-
Artec added a lot more items to their Liquidation sale.
http://www.artecindustries.com/body_armor_tjlj
Sent from my iPhone using Tapatalk Pro
Wow. Good deals right there
Yea someone needs to jump on that Aluminum LJ armor.
Sent from my iPhone using Tapatalk Pro
-
Artec added a lot more items to their Liquidation sale.
http://www.artecindustries.com/body_armor_tjlj
Sent from my iPhone using Tapatalk Pro
Wow. Good deals right there
Yea someone needs to jump on that Aluminum LJ armor.
Sent from my iPhone using Tapatalk Pro
No kidding! I did double take n rubbed my eyes to make sure I saw those prices right. " Oh, to have straight flat body panels ..." said the JKU owner. [rolleyes]
-
Artec added a lot more items to their Liquidation sale.
http://www.artecindustries.com/body_armor_tjlj
Sent from my iPhone using Tapatalk Pro
Wow. Good deals right there
Yea someone needs to jump on that Aluminum LJ armor.
Sent from my iPhone using Tapatalk Pro
No kidding! I did double take n rubbed my eyes to make sure I saw those prices right. " Oh, to have straight flat body panels ..." said the JKU owner. [rolleyes]
[cheers]
Sent from my iPhone using Tapatalk
-
Artec added a lot more items to their Liquidation sale.
http://www.artecindustries.com/body_armor_tjlj
Sent from my iPhone using Tapatalk Pro
Wow. Good deals right there
Yea someone needs to jump on that Aluminum LJ armor.
Sent from my iPhone using Tapatalk Pro
I’d be all over it if I hadn’t just bought Danny’s PSC corners
-
Artec added a lot more items to their Liquidation sale.
http://www.artecindustries.com/body_armor_tjlj
Sent from my iPhone using Tapatalk Pro
Wow. Good deals right there
Yea someone needs to jump on that Aluminum LJ armor.
Sent from my iPhone using Tapatalk Pro
I’d be all over it if I hadn’t just bought Danny’s PSC corners
Stretch corners?
-
Artec added a lot more items to their Liquidation sale.
http://www.artecindustries.com/body_armor_tjlj
Sent from my iPhone using Tapatalk Pro
Wow. Good deals right there
Yea someone needs to jump on that Aluminum LJ armor.
Sent from my iPhone using Tapatalk Pro
I’d be all over it if I hadn’t just bought Danny’s PSC corners
Stretch corners?
No I’m going to stick to 103-105”
Sent from my iPhone using Tapatalk
-
Artec added a lot more items to their Liquidation sale.
http://www.artecindustries.com/body_armor_tjlj
Sent from my iPhone using Tapatalk Pro
Wow. Good deals right there
Yea someone needs to jump on that Aluminum LJ armor.
Sent from my iPhone using Tapatalk Pro
I’d be all over it if I hadn’t just bought Danny’s PSC corners
Stretch corners?
No I’m going to stick to 103-105”
Sent from my iPhone using Tapatalk
(https://uploads.tapatalk-cdn.com/20181109/b85777023b38bf9604145c8bdeae67e7.jpg)
-
Artec added a lot more items to their Liquidation sale.
http://www.artecindustries.com/body_armor_tjlj
Sent from my iPhone using Tapatalk Pro
Wow. Good deals right there
Yea someone needs to jump on that Aluminum LJ armor.
Sent from my iPhone using Tapatalk Pro
I’d be all over it if I hadn’t just bought Danny’s PSC corners
Stretch corners?
No I’m going to stick to 103-105”
Sent from my iPhone using Tapatalk
(https://uploads.tapatalk-cdn.com/20181109/b85777023b38bf9604145c8bdeae67e7.jpg)
Truth
-
Artec added a lot more items to their Liquidation sale.
http://www.artecindustries.com/body_armor_tjlj
Sent from my iPhone using Tapatalk Pro
Wow. Good deals right there
Yea someone needs to jump on that Aluminum LJ armor.
Sent from my iPhone using Tapatalk Pro
I’d be all over it if I hadn’t just bought Danny’s PSC corners
Stretch corners?
No I’m going to stick to 103-105”
Sent from my iPhone using Tapatalk
(https://uploads.tapatalk-cdn.com/20181109/b85777023b38bf9604145c8bdeae67e7.jpg)
I want to do the trail gate so I may end up switching to the daddy long legs version anyways since it doesn’t have the cutout for the hinges. We’ll see. Gotta find axles before I start on the body
-
Who is buying a LJ WOD chassis on Black Friday?
-
Who is buying a LJ WOD chassis on Black Friday?
I saw it, and ordered it immediately.
-
Who is buying a LJ WOD chassis on Black Friday?
I saw it, and ordered it immediately.
(https://pics.me.me/i-dont-believe-you-memegenerator-net-34138359.png)
Sent from my iPhone using Tapatalk
-
Who is buying a LJ WOD chassis on Black Friday?
I saw it, and ordered it immediately.
My buddy got one, but his was also a full build completed by WOD.
-
Who is buying a LJ WOD chassis on Black Friday?
I saw it, and ordered it immediately.
I'm gonna hold off until its 15% off.
-
Who is buying a LJ WOD chassis on Black Friday?
I saw it, and ordered it immediately.
I'm gonna hold off until its 15% off.
Smart move.
-
Who is buying a LJ WOD chassis on Black Friday?
Free shipping or gtfo
-
These are dead as sexy. Aluminum 14 bolt hubs
https://www.ballisticfabrication.com/products/aluminum-full-float-axle-hubs
(https://uploads.tapatalk-cdn.com/20181122/e8a8f1d95ed878bec8cc87d59a74e0a5.jpg)
-
These are dead as sexy. Aluminum 14 bolt hubs
https://www.ballisticfabrication.com/products/aluminum-full-float-axle-hubs
(https://uploads.tapatalk-cdn.com/20181122/e8a8f1d95ed878bec8cc87d59a74e0a5.jpg)
Bling! Wish they had those for a 60!
Sent from my iPhone using Tapatalk
-
These are dead as sexy. Aluminum 14 bolt hubs
https://www.ballisticfabrication.com/products/aluminum-full-float-axle-hubs
(https://uploads.tapatalk-cdn.com/20181122/e8a8f1d95ed878bec8cc87d59a74e0a5.jpg)
Bling! Wish they had those for a 60!
Sent from my iPhone using Tapatalk
They are out there. Blue torch fab use to and may do. Summit Machine has them for the D60.
Sent from my SM-G935V using Tapatalk
-
I am about to take the plunge and order.
-
10% off Atlas T-Cases through AA. Looks to be about $2,277 for case setup for a TJ/LJ [help]
-
Spend the coin for the 4-speed!
Sent from my iPhone using Tapatalk
-
Spend the coin for the 4-speed!
Sent from my iPhone using Tapatalk
You buyin?!
From what I’ve read the 4 speed is a bitch to fit
Sent from my iPhone using Tapatalk
-
Haha I’ve already bought mine.
Clark installed his and would have thoughts. Danny installed mine.
And with 10% off the more you spend the more you save! Lol
Sent from my iPhone using Tapatalk
-
Haha I’ve already bought mine.
Clark installed his and would have thoughts. Danny installed mine.
And with 10% off the more you spend the more you save! Lol
Sent from my iPhone using Tapatalk
Do you really use all 4 speeds that often?
-
I use it enough to justify the cost. And when I use it, its in a spot where the extra control is nice to have. I use it more so going down than going up. It lets me go down steep/technical stuff without having to use the brakes...
Frankly, for a 2-speed case with 4:1 gearing behind a stock engine, I don't know that spending twice on the Atlas is worth it. Grab a Rubi case. I certainly haven't used the front dig capabilities of the twin stick more than a couple times... I'm sure others will disagree!
-
It lets me go down steep/technical stuff without having to use the brakes..
Certainly around here that's the main advantage. In Moab the extra low gearing can be useful.
-
I use it enough to justify the cost. And when I use it, its in a spot where the extra control is nice to have. I use it more so going down than going up. It lets me go down steep/technical stuff without having to use the brakes...
Frankly, for a 2-speed case with 4:1 gearing behind a stock engine, I don't know that spending twice on the Atlas is worth it. Grab a Rubi case. I certainly haven't used the front dig capabilities of the twin stick more than a couple times... I'm sure others will disagree!
Rubi case is still chain driven and go for 1,500+. My dilemma is spend 600 and a bunch of time on an sye, yokes, and an HD chain and still only have 2.72:1, spend 1,500 on a rubi case and get 4:1 but still have a chain case and no warranty and likely have to spend another 150 or so on yokes, or spend 2,300 and have a bulletproof gear driven case with a warranty and some blingin twin sticks
-
I use it enough to justify the cost. And when I use it, its in a spot where the extra control is nice to have. I use it more so going down than going up. It lets me go down steep/technical stuff without having to use the brakes...
Frankly, for a 2-speed case with 4:1 gearing behind a stock engine, I don't know that spending twice on the Atlas is worth it. Grab a Rubi case. I certainly haven't used the front dig capabilities of the twin stick more than a couple times... I'm sure others will disagree!
I’m a fan of the 4 speed too.
The low/low(10:1) is a little too low for me but, like JC, going down technical stuff it’s really nice.
What I really like is being able to swap from the 2.7:1 and the 3.8:1. It doesn’t sound like a lot but, for me, there is a difference there that I like.
Always good to have choices. But in the long run, nothing wrong w the 2 speed
-
I use it enough to justify the cost. And when I use it, its in a spot where the extra control is nice to have. I use it more so going down than going up. It lets me go down steep/technical stuff without having to use the brakes...
Frankly, for a 2-speed case with 4:1 gearing behind a stock engine, I don't know that spending twice on the Atlas is worth it. Grab a Rubi case. I certainly haven't used the front dig capabilities of the twin stick more than a couple times... I'm sure others will disagree!
I’m a fan of the 4 speed too.
The low/low(10:1) is a little too low for me but, like JC, going down technical stuff it’s really nice.
What I really like is being able to swap from the 2.7:1 and the 3.8:1. It doesn’t sound like a lot but, for me, there is a difference there that I like.
Always good to have choices. But in the long run, nothing wrong w the 2 speed
I’ve got the two speed with 4.3 to 1 and it would be real decent to have a 2 to 1 or 2.7 to 1 sometimes.
Sent from my iPhone using Tapatalk
-
If a Rubi case is $1,500+ then yeah that changes things... I thought you could still pick them up for around a grand.
-
If a Rubi case is $1,500+ then yeah that changes things... I thought you could still pick them up for around a grand.
I’ve been looking for a few months. I saw one go for 1300 with a bad chain. Cheapest I’ve seen
-
I use it enough to justify the cost. And when I use it, its in a spot where the extra control is nice to have. I use it more so going down than going up. It lets me go down steep/technical stuff without having to use the brakes...
Frankly, for a 2-speed case with 4:1 gearing behind a stock engine, I don't know that spending twice on the Atlas is worth it. Grab a Rubi case. I certainly haven't used the front dig capabilities of the twin stick more than a couple times... I'm sure others will disagree!
I’m a fan of the 4 speed too.
The low/low(10:1) is a little too low for me but, like JC, going down technical stuff it’s really nice.
What I really like is being able to swap from the 2.7:1 and the 3.8:1. It doesn’t sound like a lot but, for me, there is a difference there that I like.
Always good to have choices. But in the long run, nothing wrong w the 2 speed
I’ve got the two speed with 4.3 to 1 and it would be real decent to have a 2 to 1 or 2.7 to 1 sometimes.
Sent from my iPhone using Tapatalk
Assuming you have the jk automatic, can’t you just shift in to 2nd gear? That drops your crawl ratio down to similar if you were at to 2.7:1
-
If a Rubi case is $1,500+ then yeah that changes things... I thought you could still pick them up for around a grand.
I’ve been looking for a few months. I saw one go for 1300 with a bad chain. Cheapest I’ve seen
The initial purchase price of the Atlas seems like a lot. But to have something factory new that is an all gear drive case, it’s a good value IMO, and I am cheap!
Plus after having independent control of front and rear axles with my 115” wheelbase, I can never go back to another case that doesn’t offer this. I find it easy to shift axles in and out of gear and use it all the time in the trail.
-
If a Rubi case is $1,500+ then yeah that changes things... I thought you could still pick them up for around a grand.
I’ve been looking for a few months. I saw one go for 1300 with a bad chain. Cheapest I’ve seen
I sold mine in perfect shape for $1200.
-
I use it enough to justify the cost. And when I use it, its in a spot where the extra control is nice to have. I use it more so going down than going up. It lets me go down steep/technical stuff without having to use the brakes...
Frankly, for a 2-speed case with 4:1 gearing behind a stock engine, I don't know that spending twice on the Atlas is worth it. Grab a Rubi case. I certainly haven't used the front dig capabilities of the twin stick more than a couple times... I'm sure others will disagree!
Rubi case is still chain driven and go for 1,500+. My dilemma is spend 600 and a bunch of time on an sye, yokes, and an HD chain and still only have 2.72:1, spend 1,500 on a rubi case and get 4:1 but still have a chain case and no warranty and likely have to spend another 150 or so on yokes, or spend 2,300 and have a bulletproof gear driven case with a warranty and some blingin twin sticks
Where do you buy an atlas fully loaded with twin sticks for $2300?
-
I use it enough to justify the cost. And when I use it, its in a spot where the extra control is nice to have. I use it more so going down than going up. It lets me go down steep/technical stuff without having to use the brakes...
Frankly, for a 2-speed case with 4:1 gearing behind a stock engine, I don't know that spending twice on the Atlas is worth it. Grab a Rubi case. I certainly haven't used the front dig capabilities of the twin stick more than a couple times... I'm sure others will disagree!
I’m a fan of the 4 speed too.
The low/low(10:1) is a little too low for me but, like JC, going down technical stuff it’s really nice.
What I really like is being able to swap from the 2.7:1 and the 3.8:1. It doesn’t sound like a lot but, for me, there is a difference there that I like.
Always good to have choices. But in the long run, nothing wrong w the 2 speed
I’ve got the two speed with 4.3 to 1 and it would be real decent to have a 2 to 1 or 2.7 to 1 sometimes.
Sent from my iPhone using Tapatalk
Assuming you have the jk automatic, can’t you just shift in to 2nd gear? That drops your crawl ratio down to similar if you were at to 2.7:1
Yes which is fine for crawling when you are not going to stop but once you stop it shifts back into first. Where I need a little more wheel speed is when I hit something bigger from a stop. It’s impossible to start in 3rd gear which is where I need to be
Sent from my iPhone using Tapatalk
-
I use it enough to justify the cost. And when I use it, its in a spot where the extra control is nice to have. I use it more so going down than going up. It lets me go down steep/technical stuff without having to use the brakes...
Frankly, for a 2-speed case with 4:1 gearing behind a stock engine, I don't know that spending twice on the Atlas is worth it. Grab a Rubi case. I certainly haven't used the front dig capabilities of the twin stick more than a couple times... I'm sure others will disagree!
Rubi case is still chain driven and go for 1,500+. My dilemma is spend 600 and a bunch of time on an sye, yokes, and an HD chain and still only have 2.72:1, spend 1,500 on a rubi case and get 4:1 but still have a chain case and no warranty and likely have to spend another 150 or so on yokes, or spend 2,300 and have a bulletproof gear driven case with a warranty and some blingin twin sticks
Where do you buy an atlas fully loaded with twin sticks for $2300?
X2. my build out was over 3k
-
Damn, I think I paid $3250 for my 4 speed shipped to my house with cable shifters and sight tube at the end of 2015.
-
Edit: found it, it was right at $2650 shipped.
I can’t find my receipt, but I bought mine December 2013 and I remember it being around $2700 shipped with the standard shifters. If you could get 10% off that price for Black Friday that would be even better.
2 speed, 4.3, 1410 yokes, standard tailhousing.
-
Edit: found it, it was right at $2650 shipped.
I can’t find my receipt, but I bought mine December 2013 and I remember it being around $2700 shipped with the standard shifters. If you could get 10% off that price for Black Friday that would be even better.
2 speed, 4.3, 1410 yokes, standard tailhousing.
I think I had a free shipping code from pirate or hardline that I used in combination with 10 or 15% off.
-
I use it enough to justify the cost. And when I use it, its in a spot where the extra control is nice to have. I use it more so going down than going up. It lets me go down steep/technical stuff without having to use the brakes...
Frankly, for a 2-speed case with 4:1 gearing behind a stock engine, I don't know that spending twice on the Atlas is worth it. Grab a Rubi case. I certainly haven't used the front dig capabilities of the twin stick more than a couple times... I'm sure others will disagree!
Rubi case is still chain driven and go for 1,500+. My dilemma is spend 600 and a bunch of time on an sye, yokes, and an HD chain and still only have 2.72:1, spend 1,500 on a rubi case and get 4:1 but still have a chain case and no warranty and likely have to spend another 150 or so on yokes, or spend 2,300 and have a bulletproof gear driven case with a warranty and some blingin twin sticks
Where do you buy an atlas fully loaded with twin sticks for $2300?
Advanceadapers.com
Sent from my iPhone using Tapatalk
-
Edit: found it, it was right at $2650 shipped.
I can’t find my receipt, but I bought mine December 2013 and I remember it being around $2700 shipped with the standard shifters. If you could get 10% off that price for Black Friday that would be even better.
2 speed, 4.3, 1410 yokes, standard tailhousing.
Do I need the mechanical housing or just the plug?
Sent from my iPhone using Tapatalk
-
here is my build sheet. 2600 -260 = 2340
-
I got just the block off plug since I am not running a speedometer. If you want to hook up your speedo you will need to get the gear to go in the tail housing. If you are not using the stock gauge cluster you could use a GPS speedo.
-
I got just the block off plug since I am not running a speedometer. If you want to hook up your speedo you will need to get the gear to go in the tail housing. If you are not using the stock gauge cluster you could use a GPS speedo.
I read the stock Speedo works. I might just call tomorrow
Sent from my iPhone using Tapatalk
-
here is my build sheet. 2600 -260 = 2340
My was 3035- 303 = 2732
-
here is my build sheet. 2600 -260 = 2340
My was 3035- 303 = 2732
2 or 4 speed? Just asking in case there was a box I missed
Sent from my iPhone using Tapatalk
-
here is my build sheet. 2600 -260 = 2340
My was 3035- 303 = 2732
2 or 4 speed? Just asking in case there was a box I missed
Sent from my iPhone using Tapatalk
2 speed, 1300 flanges, sight tube and cable shifters :)
-
Good deal right here if anyone is looking for a solid 220v welder. I run the same one(https://uploads.tapatalk-cdn.com/20181123/5a128143617b46d363463e8efea251b1.jpg)
Sent from my SM-G955U using Tapatalk
-
20% off Barnes stuff(https://uploads.tapatalk-cdn.com/20181123/73a6573bbee88162e42aa2b302ca258a.jpg)
-
Barnes 4WD - 20% off today with code BLACKFRIDAY
-
Rugged Radio
-
Ballistic Fab
-
RUFF STUFF
20% OFF CRAWLER PARTS
10% OFF RZR PARTS
-
(https://uploads.tapatalk-cdn.com/20181123/dcb7c8f6ba8708f616b3a73cadb8e251.jpg)
-
(PITBULL SALE PICTURE)
Raise the price 37% then offer 55% off....
-
Metal cloak
Free shipping + 10% off - Code PARADISE
-
Ok, so I am prepared for the comments saying why would I post a $50k rig in a good deal thread. I think this is priced fairly for what it has in it and the quality of the build. Super cool looking rig IMO.
http://www.hardlinecrawlers.com/forums/index.php?topic=59961.0
-
Ok, so I am prepared for the comments saying why would I post a $50k rig in a good deal thread. I think this is priced fairly for what it has in it and the quality of the build. Super cool looking rig IMO.
http://www.hardlinecrawlers.com/forums/index.php?topic=59961.0
I agree. Only thing I dislike is the all-black color scheme, but that wouldn't stop me from wheeling it
-
That buggy is killer.
Sent from my iPhone using Tapatalk
-
Ok, so I am prepared for the comments saying why would I post a $50k rig in a good deal thread. I think this is priced fairly for what it has in it and the quality of the build. Super cool looking rig IMO.
http://www.hardlinecrawlers.com/forums/index.php?topic=59961.0
40" sticky nittos? Anybody seen those before?
-
Ok, so I am prepared for the comments saying why would I post a $50k rig in a good deal thread. I think this is priced fairly for what it has in it and the quality of the build. Super cool looking rig IMO.
http://www.hardlinecrawlers.com/forums/index.php?topic=59961.0
40" sticky nittos? Anybody seen those before?
Someone posted up some “sticky” Falkens a few weeks ago so I guess anything is possible
-
Ok, so I am prepared for the comments saying why would I post a $50k rig in a good deal thread. I think this is priced fairly for what it has in it and the quality of the build. Super cool looking rig IMO.
http://www.hardlinecrawlers.com/forums/index.php?topic=59961.0
40" sticky nittos? Anybody seen those before?
Someone posted up some “sticky” Falkens a few weeks ago so I guess anything is possible
Also saw sticky IROCS, sticky MTR2's and a few others.
-
Ok, so I am prepared for the comments saying why would I post a $50k rig in a good deal thread. I think this is priced fairly for what it has in it and the quality of the build. Super cool looking rig IMO.
http://www.hardlinecrawlers.com/forums/index.php?topic=59961.0
40" sticky nittos? Anybody seen those before?
Someone posted up some “sticky” Falkens a few weeks ago so I guess anything is possible
Also saw sticky IROCS, sticky MTR2's and a few others.
Toyo has a sticky. Almost bought a set of 37s a while back
-
Ok, so I am prepared for the comments saying why would I post a $50k rig in a good deal thread. I think this is priced fairly for what it has in it and the quality of the build. Super cool looking rig IMO.
http://www.hardlinecrawlers.com/forums/index.php?topic=59961.0
40" sticky nittos? Anybody seen those before?
Nitto makes them but you have to be someone to get them from Nitto. Cannot just buy them. They have changed the compound over time from what I've heard.
Sent from my SM-N960U using Tapatalk
-
@TravisMac
Or anyone looking to buy an atlas soon
(https://uploads.tapatalk-cdn.com/20181129/1163b005e0f83bf51afca0baa40d2ddd.jpg)
Sent from my SM-G955U using Tapatalk
-
I bet someone has posted this before but, I like this rig.
http://www.hardlinecrawlers.com/forums/index.php?topic=59618.0
-
I bet someone has posted this before but, I like this rig.
http://www.hardlinecrawlers.com/forums/index.php?topic=59618.0
I talked to the guy about it a couple of months ago. He didn’t build it and didn’t know a lot about the details. I didn’t get a good feeling about it after his responses.
-
JM Rigging is having a good deal on soft shackles @ $30 shipped, if anyone is in the market
-
I bought two of these and they're really nice for the $398 sale price. Normally $598.
https://www.homedepot.com/p/Husky-36-in-W-24-5-in-D-12-Drawer-Tool-Chest-and-Cabinet-Combo-in-Red-H36Ch6TR6RXD/303411385
(https://images.homedepot-static.com/productImages/05545706-1ab2-439c-8309-dd765f0ef69b/svn/red-husky-tool-chest-combos-h36ch6tr6rxd-64_1000.jpg)
-
I bought two of these and they're really nice for the $398 sale price. Normally $598.
https://www.homedepot.com/p/Husky-36-in-W-24-5-in-D-12-Drawer-Tool-Chest-and-Cabinet-Combo-in-Red-H36Ch6TR6RXD/303411385
Nice! but dang black is $499
This is $498!
https://www.homedepot.com/p/Husky-61-in-W-x-18-in-D-10-Drawer-1-Door-Tool-Chest-and-Cabinet-Combo-in-Black-H61CH4TR6P/305220490
(https://images.homedepot-static.com/productImages/691162ee-7953-47a2-b4c7-a9e5a6523c7f/svn/rust-resistant-powder-coat-black-paint-finish-husky-tool-chest-combos-h61ch4tr6p-64_1000.jpg)
-
I bought two of these and they're really nice for the $398 sale price. Normally $598.
https://www.homedepot.com/p/Husky-36-in-W-24-5-in-D-12-Drawer-Tool-Chest-and-Cabinet-Combo-in-Red-H36Ch6TR6RXD/303411385
Nice! but dang black is $499
This is $498!
https://www.homedepot.com/p/Husky-61-in-W-x-18-in-D-10-Drawer-1-Door-Tool-Chest-and-Cabinet-Combo-in-Black-H61CH4TR6P/305220490
(https://images.homedepot-static.com/productImages/691162ee-7953-47a2-b4c7-a9e5a6523c7f/svn/rust-resistant-powder-coat-black-paint-finish-husky-tool-chest-combos-h61ch4tr6p-64_1000.jpg)
I have a similar one and while it’s no snapon, it’s very nice for the price.
-
I bought two of these and they're really nice for the $398 sale price. Normally $598.
https://www.homedepot.com/p/Husky-36-in-W-24-5-in-D-12-Drawer-Tool-Chest-and-Cabinet-Combo-in-Red-H36Ch6TR6RXD/303411385
(https://images.homedepot-static.com/productImages/05545706-1ab2-439c-8309-dd765f0ef69b/svn/red-husky-tool-chest-combos-h36ch6tr6rxd-64_1000.jpg)
That bad boy looks nice. I have a slightly smaller version of that. Has been a good box
-
For a hundo mo I couldn't go wrong and I wanted black, thanks jc
-
For a hundo mo I couldn't go wrong and I wanted black, thanks jc
----
That thing looks HUUGE! congrats.
-
The red and the black ones don’t have enough drawers. Lots of wasted space.
-
The red and the black ones don’t have enough drawers. Lots of wasted space.
Is there another color?
-
The red and the black ones don’t have enough drawers. Lots of wasted space.
Is there another color?
Meant the ones pictured above. Big boxes, few drawers. Better deals at HF.
-
The red and the black ones don’t have enough drawers. Lots of wasted space.
How many drawers do you need? And do you not have any tools that are more than 1" high?
-
The red and the black ones don’t have enough drawers. Lots of wasted space.
Is there another color?
Meant the ones pictured above. Big boxes, few drawers. Better deals at HF.
I'm sure you know my thoughts on HF but, if I were to take a critical eye to the above I would agree on the drawers could be better setup in both models but for the price, they are nice.
-
I bought this one https://www.homedepot.com/p/Husky-61-in-W-x-18-in-D-18-Drawer-Tool-Chest-and-Cabinet-Combo-in-Black-H61CH6TR12/304016203 about 3.5 years ago and it has been great. A lot more drawers.
-
The red and the black ones don’t have enough drawers. Lots of wasted space.
Is there another color?
Meant the ones pictured above. Big boxes, few drawers. Better deals at HF.
I'm sure you know my thoughts on HF but, if I were to take a critical eye to the above I would agree on the drawers could be better setup in both models but for the price, they are nice.
I've seen a couple YouTube reviews from Tool channels and they all say that the US General is superior in comparison to the Husky / Kobalt and even Craftsman boxes. That being said I personally have a small Craftsman box but have been looking for a bigger one. They all say the construction, Casters, drawer slides etc are all better. Obviously not as good as the Snap On / Matco boxes. This could all be BS but that's just the info I have gathered. I do think for the DIY'er like most of us are we couldn't go wrong with any of them. I'll just buy whatever suits my needs and is the best price at the time I'm ready to purchase. And I could care less about the color.
-
The red and the black ones don’t have enough drawers. Lots of wasted space.
Is there another color?
Meant the ones pictured above. Big boxes, few drawers. Better deals at HF.
I'm sure you know my thoughts on HF but, if I were to take a critical eye to the above I would agree on the drawers could be better setup in both models but for the price, they are nice.
I've had a HF box for 11 years. It still works as well as it did when I got it.
I'd buy it again.
-
The red and the black ones don’t have enough drawers. Lots of wasted space.
The red one is literally all drawers aside from the hinged area on top. I have tools and stuff to store that have needed every size drawer... top area holds circular saw, framing nailer, etc.
HF stuff is more money for less overall space.
-
(https://cdn.ironpla.net/i/743/760/743760_6002_0_0004.jpg) (https://www.govplanet.com/for-sale/Humvees-AM-General-M1045A2-HMMWV-4-Door-Hard-Top-w%2FSlant-Back-Georgia/1850578?h=5002%2Cmsg%7C34972%2CisAuc%7Cyes&rr=0.33333&hitprm=&pnLink=yes)
-
Not enough drawers.
-
lmao lmao
-
Not enough drawers.
Hahahaha! nicely done.
-
I might need to have some "Not enough drawers." t-shirts made up.
-
I might need to have some "Not enough drawers." t-shirts made up.
Tanks?
-
Damn you guys are on a roll!
-
I might need to have some "Not enough drawers." t-shirts made up.
Tanks?
(https://uploads.tapatalk-cdn.com/20181213/8586fd3023aa23f0690603a33b360386.jpg)
Sent from my iPhone using Tapatalk
-
I might need to have some "Not enough drawers." t-shirts made up.
Tanks?
(https://uploads.tapatalk-cdn.com/20181213/8586fd3023aa23f0690603a33b360386.jpg)
Sent from my iPhone using Tapatalk
LMFAO!!
Sent from my iPhone using Tapatalk
-
I saw a video on YouTube last afternoon & once it completed , I looked at the vendor I had never heard of & that the XJ in said video had been upgraded with.
From what I learned , it's the company of a veteran (& regular on NAXJA forum) that can make slamming 2AWG or 4 AWG battery and starting system power harnesses. They are either $100 or $140 bucks, based upon the guage chosen. Pre-cut for XJ,YJ or WJs , he can also make per request.
I am in need for some on my Cherokee. I have s list I put together on Amazon but this guy would save me a little and his cables look solid .
(https://i.imgur.com/W8DpQGr.png)
Here's the video I watched. I got more interested as it went on by the wires and markings as he carried outthe upgrade in video. The info about the JeepCables company is at the end if you are bored by main subject content..
-
(https://i.imgur.com/Szvwni5.png?2)
Tractor Supply has a little off of the Hobart 190 welded presently...
-
I saw a video on YouTube last afternoon & once it completed , I looked at the vendor I had never heard of & that the XJ in said video had been upgraded with.
I saw that this morning and planned to watch it this afternoon. Thanks for sharing!
-
http://www.hardlinecrawlers.com/forums/index.php?topic=60118.0
-
http://www.hardlinecrawlers.com/forums/index.php?topic=60118.0
That's nice.
-
Who has a built 4 door JK to trade?
http://www.hardlinecrawlers.com/forums/index.php?topic=60121.0;topicseen
-
Who has a built 4 door JK to trade?
http://www.hardlinecrawlers.com/forums/index.php?topic=60121.0;topicseen
@DOUG get on it and make the trade...
-
That’s nice!
Sent from my iPhone using Tapatalk Pro
-
Damn. Do it Doug!
-
Who has a built 4 door JK to trade?
http://www.hardlinecrawlers.com/forums/index.php?topic=60121.0;topicseen
Curious to know your'alls opinions on this ; is what he's asking a fair price ?
(There's no way I'll get it to happen but ) am considering going to the effort of getting pix & detailing my four door to show him . I wanna know if he's on mark w) his value of his rig. To me seems pretty fair.
-
Who has a built 4 door JK to trade?
http://www.hardlinecrawlers.com/forums/index.php?topic=60121.0;topicseen
Curious to know your'alls opinions on this ; is what he's asking a fair price ?
(There's no way I'll get it to happen but ) am considering going to the effort of getting pix & detailing my four door to show him . I wanna know if he's on mark w) his value of his rig. To me seems pretty fair.
Seems a little high but he may have just puf a number of it but as stated, he really looking for a trade. Can always offer.
Sent from my SM-N960U using Tapatalk
-
Who has a built 4 door JK to trade?
http://www.hardlinecrawlers.com/forums/index.php?topic=60121.0;topicseen
@DOUG get on it and make the trade...
Not my flavor at all so therefore way over priced for me. A $38k LJ looks a lot different.
-
I was down at the Pull a Part south today getting my hustle on.
They have a running, yard driving 85 CJ7 with a clean GA title, 258 I6, 5 speed transmission, Dana 300 t case, Dana 30 & 20 axles.
It has some rust on the tub but that's expected on a $1500 Jeep.
No top or back seat. Crap 35 tires but a nice set of old alloy wheels. Superwinch lockouts & factory swinging tire rack.
-
A member by name of 'Ruskin' has posted several parts worth mentioning ( he states he sold his Jeep as reason) over on JKO
I mention because they are located in Atlanta .
Looks like a winch, hi lift , a CB and this tierod which isn't bad for the Synergy JK version :
https://www.jkowners.com/forum/sale-jeep-parts/381776-polyperformance-synergy-jk-tie-rod.html
You probably wanna search his username if they don't appear in Active Threads ....
-
https://www.pirate4x4.com/forum/vehicles-trailers-sale/2674866-im-selling-my-two-seat-ultra4-car-comes-registered-4400class-koh-spot.html#post44257566
Jeff selling his car With KOH spot. [drool]
-
https://www.pirate4x4.com/forum/vehicles-trailers-sale/2674866-im-selling-my-two-seat-ultra4-car-comes-registered-4400class-koh-spot.html#post44257566
Jeff selling his car With KOH spot. [drool]
That's a lot of vehicle for 30k. Wonder if he wants a clapped out CJ5... would need to add money on his end, of course
Sent from my SM-G955U using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20190109/dc39c7c182b4056a0decf459a51bfe4c.jpg)
Jay, is this your old one?
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20190109/dc39c7c182b4056a0decf459a51bfe4c.jpg)
Jay, is this your old one?
Sent from my iPhone using Tapatalk
Yup
-
Yup
-
Did he say anything about the engine in the ad?
-
Did he say anything about the engine in the ad?
I didn’t see it, but he already dealt with it.
-
Did he say anything about the engine in the ad?
I didn’t see it, but he already dealt with it.
what happened to the engine?
-
Did he say anything about the engine in the ad?
I didn’t see it, but he already dealt with it.
what happened to the engine?
He said he had issues with it a month after he got it from me. Sucky situation
-
Did he say anything about the engine in the ad?
I didn’t see it, but he already dealt with it.
what happened to the engine?
He said he had issues with it a month after he got it from me. Sucky situation
Did you tell him about the radiator overflow falling out on a trail? And the other stuff?
-
Did he say anything about the engine in the ad?
I didn’t see it, but he already dealt with it.
what happened to the engine?
He said he had issues with it a month after he got it from me. Sucky situation
Did you tell him about the radiator overflow falling out on a trail? And the other stuff?
Yeah, but he was cool about it. Both of us had a few issues to deal with, but worked it out. No bad blood.
-
Did he say anything about the engine in the ad?
I didn’t see it, but he already dealt with it.
what happened to the engine?
He said he had issues with it a month after he got it from me. Sucky situation
Did you tell him about the radiator overflow falling out on a trail? And the other stuff?
Yeah, but he was cool about it. Both of us had a few issues to deal with, but worked it out. No bad blood.
Just had to make sure you took his gang sticker off
-
Dude what kinda color Jeep was that???? ;)
-
Lowes $100 gift card for $90 on eBay. If you're a vet that's 19% total off.
-
Might be an awesome deal depending on condition
-
Lot of parts for the $
-
Agree. Hell of a deal.
-
Seems like the parts could be separated and sold for profit...
Sent from my iPhone using Tapatalk
-
Wasn't someone here looking for cheap SD wheels recently?(https://uploads.tapatalk-cdn.com/20190124/0577d80827e77eb18807c343b647ca58.jpg)
Sent from my SM-G955U using Tapatalk
-
Wasn't someone here looking for cheap SD wheels recently?(https://uploads.tapatalk-cdn.com/20190124/0577d80827e77eb18807c343b647ca58.jpg)
Sent from my SM-G955U using Tapatalk
Wasn't someone here looking for cheap SD wheels recently?(https://uploads.tapatalk-cdn.com/20190124/0577d80827e77eb18807c343b647ca58.jpg)
Sent from my SM-G955U using Tapatalk
The dude wants to "shit through Fastenal". Do you really want to do business with someone that entertains and advertises such an activity? I'd pass.
-
The dude wants to "shit through Fastenal". Do you really want to do business with someone that entertains and advertises such an activity? I'd pass.
Seriously do you know they have extremely reliable and low cost shipping of heavy items, like axles, wheels, etc?
Wait, or did you mean "shit" lmao
-
Wasn't someone here looking for cheap SD wheels recently?(https://uploads.tapatalk-cdn.com/20190124/0577d80827e77eb18807c343b647ca58.jpg)
Sent from my SM-G955U using Tapatalk
Wasn't someone here looking for cheap SD wheels recently?(https://uploads.tapatalk-cdn.com/20190124/0577d80827e77eb18807c343b647ca58.jpg)
Sent from my SM-G955U using Tapatalk
The dude wants to "shit through Fastenal". Do you really want to do business with someone that entertains and advertises such an activity? I'd pass.
Stop double quoting folks before you trigger anyone.
-
Pre KOH sale for Ruffstuff. 15% off code: LASTCHANCE
Good thru 1/28
-
Rubihara with atlas and a trailer
(https://uploads.tapatalk-cdn.com/20190127/9a147d90f066b1d18124f51957faa894.jpg)
Sent from my iPhone using Tapatalk
-
Am thinking about getting a generator and ran across this today.
https://www.bradsdeals.com/p/385446?c_id=3784&u_id=29868012&d=013019&channel=email&utm_source=email&utm_medium=newsletter&utm_campaign=bradsdeals.NL_Daily_Newsletter_PDS_LIAdsControl_01302019_3784&u_g=m (https://www.bradsdeals.com/p/385446?c_id=3784&u_id=29868012&d=013019&channel=email&utm_source=email&utm_medium=newsletter&utm_campaign=bradsdeals.NL_Daily_Newsletter_PDS_LIAdsControl_01302019_3784&u_g=m)
Get up to 40% off power generators during this one-day sale at HomeDepot.com, plus take an extra $5 off orders over $50 when you apply the code THD185500 in your shopping cart. Shipping is free for these items. The promotion includes this 4,000/3,500-Watt Dual Fuel Powered Portable Generator, which lists at $529. It falls to $299 during the sale, and the price drops to $294 with the code. That's the best price we can find anywhere by about $47. Choose from more styles in the generator section. Sales tax is charged in most states.
-
Rubihara with atlas and a trailer
(https://uploads.tapatalk-cdn.com/20190127/9a147d90f066b1d18124f51957faa894.jpg)
Sent from my iPhone using Tapatalk
good price for the parts, but anyone that starts an add with "x inches of lift" and "this thing is built to handle the toughest rock courses" with a D44 has no clue what hes talking about, and hes from FL, so theres that, basically Augusta or wherever @patman is from in the flatlands.
-
Rubihara with atlas and a trailer
(https://uploads.tapatalk-cdn.com/20190127/9a147d90f066b1d18124f51957faa894.jpg)
Sent from my iPhone using Tapatalk
good price for the parts, but anyone that starts an add with "x inches of lift" and "this thing is built to handle the toughest rock courses" with a D44 has no clue what hes talking about, and hes from FL, so theres that, basically Augusta or wherever @patman is from in the flatlands.
well...you missed the difference-maker:
"... hardest rock courses AT THE SAME TIME DRIVE DOWNTOWN."
It's probably got that Smittybilt dual-dimensional, time-portal kit installed...
-
Feelin' 2 Wycked?
Slap this sucka on your mall crawler & change how ya feel to 3 or even 4 Wycked :
https://nashville.craigslist.org/pts/d/gadsden-jeep-wrangler-mad-maxx-hood/6805573897.html
(http://i.imgur.com/05nHcjn.jpg)
-
Or go down to your local parts store & get yo sef a set if plaskit 'hood scoops 4 cheep.
-
Well......you can do some tough shit with D44's
-
Well......you can do some tough shit with D44's
Kevin gets it [smoke]...
I thought true capability was bought then bolted-on , @Big Dave ? [rolleyes]
-
Feelin' 2 Wycked?
Slap this sucka on your mall crawler & change how ya feel to 3 or even 4 Wycked :
https://nashville.craigslist.org/pts/d/gadsden-jeep-wrangler-mad-maxx-hood/6805573897.html
(http://i.imgur.com/05nHcjn.jpg)
at least a 5hp improvement with that mod. lmao
-
at least a 5hp improvement with that mod.
Sold
-
https://tricities.craigslist.org/cto/d/johnson-city-98-jeep-cherokee/6816310316.html
-
Good deal at Home Depot if you’re in the market for a lightweight set. I have a few closet installs and needed a lightweight setup. The combo is on sale for $129 and you get a free 2 pack of batteries (normally $79). The combo kit comes with 2, so you end up with 4. Added bonus, I had a $100 Amex gift card from work and I’m out $29 plus tax.
(https://uploads.tapatalk-cdn.com/20190216/c95a1f56c60d57d7f85aa0f383020e42.jpg)
-
https://www.pirate4x4.com/forum/vehicles-trailers-sale/2677220-2005-jeep-wrangler-lj-mild-built-5-3-1ton.html
-
https://www.pirate4x4.com/forum/vehicles-trailers-sale/2677220-2005-jeep-wrangler-lj-mild-built-5-3-1ton.html
Not a bad price. But it is retarded high for only running 12" ORI's. There's plenty of clearance for 42's.
-
https://nashville.craigslist.org/cto/d/nashville-1997-jeep-wrangler-sahara/6809431276.html
(https://images.craigslist.org/00X0X_6qnPqapjFSo_1200x900.jpg)
-
Good deal but FYI, the rear Dana 44 was a option in '97 but standard there after.
Ask me how I know.
-
Good deal but FYI, the rear Dana 44 was a option in '97 but standard there after.
Ask me how I know.
I'm about to have a dana 44 for sale if you need it!
-
Good deal but FYI, the rear Dana 44 was a option in '97 but standard there after.
Ask me how I know.
I have a 98 that didn't agree with you.
-
Good deal but FYI, the rear Dana 44 was a option in '97 but standard there after.
Ask me how I know.
I have a 98 that didn't agree with you.
Did you buy it new?
-
Good deal but FYI, the rear Dana 44 was a option in '97 but standard there after.
Ask me how I know.
I have a 98 that didn't agree with you.
Did you buy it new?
Ya
-
Well, I guess you got boned.
-
Well, I guess you got boned.
Nah, I think your information is wrong.
-
Well, I guess you got boned.
Nah, I think your information is wrong.
No need to be so aggressive Clark
Sent from my iPhone using Tapatalk
-
Good deal but FYI, the rear Dana 44 was a option in '97 but standard there after.
Ask me how I know.
How do you know?
-
Well, I guess you got boned.
Nah, I think your information is wrong.
For once I will agree with you. It's been many beers since I sold mine.
I believe the '97 didn't have the option of a 44 but '98 up did.
My mistake.
-
Well, I guess you got boned.
Nah, I think your information is wrong.
No need to be so aggressive Clark
Sent from my iPhone using Tapatalk
To be fair, I am not sure I didn't get boned, but that doesn't make his information any more correct.
-
Good deal but FYI, the rear Dana 44 was a option in '97 but standard there after.
Ask me how I know.
How do you know?
My '97 Sahara had the Dana 35.
-
My 2000 Sahara had a Dana 35
-
That option came after 2000 models my 99 had a 35 in it has well!!
Sent from my iPhone using Tapatalk
-
Got a buddy selling if anyone is looking (https://uploads.tapatalk-cdn.com/20190226/48542e8ab7a9ce69299df11538f288c1.jpg)
Sent from my SM-G955U using Tapatalk
-
Got a buddy selling if anyone is looking (https://uploads.tapatalk-cdn.com/20190226/48542e8ab7a9ce69299df11538f288c1.jpg)
Sent from my SM-G955U using Tapatalk
Sold. Thanks GATR
-
Tempted
https://atlanta.craigslist.org/atl/cto/d/acworth-1988-jeep-comanche/6831122895.html
-
Tempted
https://atlanta.craigslist.org/atl/cto/d/acworth-1988-jeep-comanche/6831122895.html
Red to rust to black?
-
Tempted
https://atlanta.craigslist.org/atl/cto/d/acworth-1988-jeep-comanche/6831122895.html
Red to rust to black?
That black one looks pretty good for 1500
Sent from my iPhone using Tapatalk
-
I'm guessing he's selling the black one.
-
05 LJ
-
Here's a steal for some of you Ballers out there...
https://www.facebook.com/marketplace/item/869807663360977/
-
Here's a steal for some of you Ballers out there...
https://www.facebook.com/marketplace/item/869807663360977/
Very fair deal right there. Those axles are very beefy
-
I just saw the used part. Still a decent deal. The new picture threw me off.
Sent from my iPhone using Tapatalk Pro
-
This could be a good deal for someone looking for a light weight trailer. I see it did have removable fenders on it at one point. Maybe the owner still has them and their just not in the photo.
16' Aluminum Car trailer.
https://atlanta.craigslist.org/eat/tro/d/rockmart-aluminum-car-trailer-16-ft/6850076379.html
-
https://atlanta.craigslist.org/sat/pts/d/mcdonough-jeep-wrangler-lj-unlimited/6853647427.html
LJ Soft top
-
https://atlanta.craigslist.org/sat/pts/d/mcdonough-jeep-wrangler-lj-unlimited/6853647427.html
LJ Soft top
Guess it sold fast.
Sent from my SM-N960U using Tapatalk
-
https://atlanta.craigslist.org/sat/pts/d/mcdonough-jeep-wrangler-lj-unlimited/6853647427.html
LJ Soft top
Guess it sold fast.
Sent from my SM-N960U using Tapatalk
That was a really good price for the top and frame
Sent from my iPhone using Tapatalk
-
https://atlanta.craigslist.org/sat/pts/d/mcdonough-jeep-wrangler-lj-unlimited/6853647427.html
LJ Soft top
Guess it sold fast.
Sent from my SM-N960U using Tapatalk
That was a really good price for the top and frame
Sent from my iPhone using Tapatalk
How much was it? Just seen the post but the link had been deleted.
Sent from my SM-N960U using Tapatalk
-
https://atlanta.craigslist.org/sat/pts/d/mcdonough-jeep-wrangler-lj-unlimited/6853647427.html
LJ Soft top
Guess it sold fast.
Sent from my SM-N960U using Tapatalk
That was a really good price for the top and frame
Sent from my iPhone using Tapatalk
How much was it? Just seen the post but the link had been deleted.
Sent from my SM-N960U using Tapatalk
$250 iirc
-
Not sure if it's a "good deal", but pretty cool for some builds on here @patman @Scott F.
-
Definitely cool grills but out of my price range....and Patman, well we know the answer to that lmao
-
Definitely cool grills but out of my price range....and Patman, well we know the answer to that lmao
It's cool, but I cant see myself using that for anything other than wall art and I dont have any more room for wall art
-
Found a good deal on a sb350 if anyone is looking(https://uploads.tapatalk-cdn.com/20190507/6d1fd44b3cd8e8e65145deeb5eaab474.jpg)
Sent from my SM-G955U using Tapatalk
-
Found a good deal on a sb350 if anyone is looking(https://uploads.tapatalk-cdn.com/20190507/6d1fd44b3cd8e8e65145deeb5eaab474.jpg)
Sent from my SM-G955U using Tapatalk
Is that a 4 bolt main?
-
It looks new. How many miles?
-
It looks new. How many miles?
Super low. About tree-hundred
-
It looks new. How many miles?
Super low. About tree-hundred
lmao
-
..why would this be $8k ? Any of you guys know this rig or have any sggstion on the price being asked for it ? Is that not seemingly a little low?
Is it the stock housings that bring her value to that level?
Thought a more experienced fab eye might detect somethin I don't...
Just curious ...
Of course, you'd have to see more of it to make accurate assessment,ik...
http://www.hardlinecrawlers.com/forums/index.php?topic=60910.0
-
7'' stretch in the front and no mention of the rear?
Pictures would be nice....
-
Have to be logged in to see pictures. Let me know if this doesn't work
(http://www.hardlinecrawlers.com/forums/index.php?action=dlattach;topic=60910.0;attach=112373;image)
-
Don't look to bad for that price.....
-
..why would this be $8k ? Any of you guys know this rig or have any sggstion on the price being asked for it ? Is that not seemingly a little low?
Is it the stock housings that bring her value to that level?
Thought a more experienced fab eye might detect somethin I don't...
Just curious ...
Of course, you'd have to see more of it to make accurate assessment,ik...
http://www.hardlinecrawlers.com/forums/index.php?topic=60910.0
At first glance - it's comp cut and the 7" stretch isn't all in the front. A "unique" cage design to say the least (I see a lot of dead nodes).
RCVs or not, 42s and a 44/9" combo would be pushing it.
-
I agree
-
..why would this be $8k ? Any of you guys know this rig or have any sggstion on the price being asked for it ? Is that not seemingly a little low?
Is it the stock housings that bring her value to that level?
Thought a more experienced fab eye might detect somethin I don't...
Just curious ...
Of course, you'd have to see more of it to make accurate assessment,ik...
http://www.hardlinecrawlers.com/forums/index.php?topic=60910.0
At first glance - it's comp cut and the 7" stretch isn't all in the front. A "unique" cage design to say the least (I see a lot of dead nodes).
RCVs or not, 42s and a 44/9" combo would be pushing it.
I've ridden with this rig, when it was yellow. Blew out an RCV, but I think he was on 37" treps at the time. @patman knew one of the owners.
-
Can someone post pics of it here for those of us that cannot see? TIA
-
Can someone post pics of it here for those of us that cannot see? TIA
(http://www.hardlinecrawlers.com/forums/index.php?action=dlattach;topic=60910.0;attach=112374;image)
-
Don't look to bad for that price.....
Not at all. $8K....seems reasonable for what you are getting.
-
..why would this be $8k ? Any of you guys know this rig or have any sggstion on the price being asked for it ? Is that not seemingly a little low?
Is it the stock housings that bring her value to that level?
Thought a more experienced fab eye might detect somethin I don't...
Just curious ...
Of course, you'd have to see more of it to make accurate assessment,ik...
http://www.hardlinecrawlers.com/forums/index.php?topic=60910.0
At first glance - it's comp cut and the 7" stretch isn't all in the front. A "unique" cage design to say the least (I see a lot of dead nodes).
RCVs or not, 42s and a 44/9" combo would be pushing it.
I've ridden with this rig, when it was yellow. Blew out an RCV, but I think he was on 37" treps at the time. @patman knew one of the owners.
I remember that guy..we wheeled with him at Hale right?
That rig worked for sure
-
..why would this be $8k ? Any of you guys know this rig or have any sggstion on the price being asked for it ? Is that not seemingly a little low?
Is it the stock housings that bring her value to that level?
Thought a more experienced fab eye might detect somethin I don't...
Just curious ...
Of course, you'd have to see more of it to make accurate assessment,ik...
http://www.hardlinecrawlers.com/forums/index.php?topic=60910.0
At first glance - it's comp cut and the 7" stretch isn't all in the front. A "unique" cage design to say the least (I see a lot of dead nodes).
RCVs or not, 42s and a 44/9" combo would be pushing it.
I've ridden with this rig, when it was yellow. Blew out an RCV, but I think he was on 37" treps at the time. @patman knew one of the owners.
I remember that guy..we wheeled with him at Hale right?
That rig worked for sure
Yep...hale and it worked until it didn't
Sent from my SM-G960U using Tapatalk
-
..why would this be $8k ? Any of you guys know this rig or have any sggstion on the price being asked for it ? Is that not seemingly a little low?
Is it the stock housings that bring her value to that level?
Thought a more experienced fab eye might detect somethin I don't...
Just curious ...
Of course, you'd have to see more of it to make accurate assessment,ik...
http://www.hardlinecrawlers.com/forums/index.php?topic=60910.0
At first glance - it's comp cut and the 7" stretch isn't all in the front. A "unique" cage design to say the least (I see a lot of dead nodes).
RCVs or not, 42s and a 44/9" combo would be pushing it.
I've ridden with this rig, when it was yellow. Blew out an RCV, but I think he was on 37" treps at the time. @patman knew one of the owners.
I remember that guy..we wheeled with him at Hale right?
That rig worked for sure
Yep...hale and it worked until it didn't
Sent from my SM-G960U using Tapatalk
Correct. Price is due to cage is fugly as hell, it's on 44/9 axles and stock suspension. Used to be on 37 sticky treps, and my friend blew out a few axle shafts and I think a r&p once or twice.
I think the stretch is all in the front, the rear is still on stock set up. Comp cut was to fit the tires. I may have more pics, I'll look.
**actually, check out the hale ride pics from 2016, there should be some
-
Other than too big of tires for the axles, the jeep worked well. Still, you couldn't build a TJ like that for the money.
-
Can someone post pics of it here for those of us that cannot see? TIA
My phone messed up last time upgraded, so a lot of photos arent in chronological order. Heres what I could find from my first trip to chocco, the month before the Hale ride(https://uploads.tapatalk-cdn.com/20190612/4314428fc1275c21f74c170a8c3fe32b.jpg)(https://uploads.tapatalk-cdn.com/20190612/e5f6befc8ffafd41ea50c93c96dc7e40.jpg)(https://uploads.tapatalk-cdn.com/20190612/9a8cb5e70b62262f71c092d40d5b23d4.jpg)
Sent from my SM-G955U using Tapatalk
-
Cool truck for 4k!
83 Solid Axle Toyota SR5 4WD Long Bed - $4000
- https://atlanta.craigslist.org/atl/cto/d/atlanta-83-solid-axle-toyota-sr5-4wd/6898232168.html
Selling a mechanically sound SR5 4WD solid axle truck. Has updated carb, lift, rock crawler wheels, and NEW 35” BFG KM3s.
Great base for a rock crawler or Mudder.
I don’t need help selling and please no ridiculous lowball offers. Cash in person only. Will provide bill of sale.
-
That’s a 2nd gen bed on a 1st gen truck. I don’t think I have seen that before.
-
That’s a 2nd gen bed on a 1st gen truck. I don’t think I have seen that before.
Needs a bob BAD!
-
That’s a 2nd gen bed on a 1st gen truck. I don’t think I have seen that before.
Needs a bob BAD!
Truth!
-
Don't look to bad for that price.....
Not at all. $8K....seems reasonable for what you are getting.
well , I'm gonna be working w whatever I can sell the Unlimited for ,minus a couple of grand, so this is in my budget range.
that's cool you guys know the rig. thanks. I think I've seen it around before .
as long as talking about it , is it the small housings on this that's causing it to not move ya think?:
http://www.hardlinecrawlers.com/forums/index.php?topic=59658.0
that's exactly what I'm lookin to trade for / buy. I'd have to research a lot .
-
Don't look to bad for that price.....
Not at all. $8K....seems reasonable for what you are getting.
well , I'm gonna be working w whatever I can sell the Unlimited for ,minus a couple of grand, so this is in my budget range.
that's cool you guys know the rig. thanks. I think I've seen it around before .
as long as talking about it , is it the small housings on this that's causing it to not move ya think?:
http://www.hardlinecrawlers.com/forums/index.php?topic=59658.0
that's exactly what I'm lookin to trade for / buy. I'd have to research a lot .
"I will say the interior is very comfortable but tight. I’m around 5ft 10inches 135lbs"
I'd say so! Nice little toy.
-
Don't look to bad for that price.....
Not at all. $8K....seems reasonable for what you are getting.
well , I'm gonna be working w whatever I can sell the Unlimited for ,minus a couple of grand, so this is in my budget range.
that's cool you guys know the rig. thanks. I think I've seen it around before .
as long as talking about it , is it the small housings on this that's causing it to not move ya think?:
http://www.hardlinecrawlers.com/forums/index.php?topic=59658.0
that's exactly what I'm lookin to trade for / buy. I'd have to research a lot .
"I will say the interior is very comfortable but tight. I’m around 5ft 10inches 135lbs"
I'd say so! Nice little toy.
ok.
I thought so. it is not helped by the internal cage taking up a lot ,too.
And the cage is a bit wonky lookin.
.
isn't that fairly beefy for a flatfender Willy's?.
-
@j3ff3ry_j33p FWIW, I never broke a ring and pinion in my d44s. But, I did break an axle shaft, knuckle, or chewed up an axle bearing almost every trip when I had the 37" reds. Stickies are very hard on parts, and d44s have small, weak parts
-
@j3ff3ry_j33p FWIW, I never broke a ring and pinion in my d44s. But, I did break an axle shaft, knuckle, or chewed up an axle bearing almost every trip when I had the 37" reds. Stickies are very hard on parts, and d44s have small, weak parts
you're one of the 44s saviors, in my mind, Pat. I watched closely whenever i was around your rig on the 44s.
However, as you point out , we all eventually come to understand way better than we care to that the 44's ( and 30s [no2] ) have small, weak parts ...no matter how strong Clark thinks they are [salute]
( im jkin , Clark) [beer]
-
@j3ff3ry_j33p FWIW, I never broke a ring and pinion in my d44s. But, I did break an axle shaft, knuckle, or chewed up an axle bearing almost every trip when I had the 37" reds. Stickies are very hard on parts, and d44s have small, weak parts
you're one of the 44s saviors, in my mind, Pat. I watched closely whenever i was around your rig on the 44s.
However, as you point out , we all eventually come to understand way better than we care to that the 44's ( and 30s [no2] ) have small, weak parts ...no matter how strong Clark thinks they are [salute]
( im jkin , Clark) [beer]
Oh sh't shots fired shots fired
-
Could make a good trail rig with some work
https://www.facebook.com/marketplace/item/862899417400480/
-
Could make a good trail rig with some work
https://www.facebook.com/marketplace/item/862899417400480/
Wow. I was 100% thinking it was a 2.5l...but nope. That thing is ripe to build out
-
Wont last long...(https://uploads.tapatalk-cdn.com/20190621/8050c60484aa3679b77529b08ceead07.jpg)
Sent from my SM-G955U using Tapatalk
-
Location
-
Location
The hardline FB group
And wherever 37803 is...
-
Maryville, TN
Thanks
-
https://electronics.woot.com/offers/baofeng-uv-5rx3-tri-band-radio-w-earpiece
-
Not bad for the parts. Slap some C/O and links on and you're set(https://uploads.tapatalk-cdn.com/20190702/538f495a16c5c831d3548b7b45992757.jpg)
Sent from my SM-G955U using Tapatalk
-
Not bad for the parts. Slap some C/O and links on and you're set(https://uploads.tapatalk-cdn.com/20190702/538f495a16c5c831d3548b7b45992757.jpg)
Sent from my SM-G955U using Tapatalk
someone buy my JKU from me and I will maybe find somethign like this.
-
Not bad for the parts. Slap some C/O and links on and you're set
(https://uploads.tapatalk-cdn.com/20190702/538f495a16c5c831d3548b7b45992757.jpg)
someone buy my JKU from me and I will maybe find somethign like this.
$12k break even :)
-
17.76% off most items at ruff stuff
-
17.76% off most items at ruff stuff
Cool discount!
Sent from my SM-G960U using Tapatalk
-
Not bad for the parts. Slap some C/O and links on and you're set
(https://uploads.tapatalk-cdn.com/20190702/538f495a16c5c831d3548b7b45992757.jpg)
someone buy my JKU from me and I will maybe find somethign like this.
$12k break even :)
lol at 5:45AM , Danny
I'm still on board w this plan .
My sense of needing a shorter, lighter , 2seat rig remains stronger than my occasional horror of how " even" in gonna get "broken" - the dollar total lo$t in selling or trading ( & that's if I'm fortunate enough to find something ) this 4 door.
-
Not bad for the parts. Slap some C/O and links on and you're set
(https://uploads.tapatalk-cdn.com/20190702/538f495a16c5c831d3548b7b45992757.jpg)
someone buy my JKU from me and I will maybe find somethign like this.
$12k break even :)
lol at 5:45AM , Danny
I'm still on board w this plan .
My sense of needing a shorter, lighter , 2seat rig remains stronger than my occasional horror of how " even" in gonna get "broken" - the dollar total lo$t in selling or trading ( & that's if I'm fortunate enough to find something ) this 4 door.
Trying to figure out what this short story means makes my head hurt.
Sent from my iPhone using Tapatalk
-
Not bad for the parts. Slap some C/O and links on and you're set
(https://uploads.tapatalk-cdn.com/20190702/538f495a16c5c831d3548b7b45992757.jpg)
someone buy my JKU from me and I will maybe find somethign like this.
$12k break even :)
lol at 5:45AM , Danny
I'm still on board w this plan .
My sense of needing a shorter, lighter , 2seat rig remains stronger than my occasional horror of how " even" in gonna get "broken" - the dollar total lo$t in selling or trading ( & that's if I'm fortunate enough to find something ) this 4 door.
Trying to figure out what this short story means makes my head hurt.
Sent from my iPhone using Tapatalk
Haha
-
It’s okay. Your brain does funny stuff when you enter gotta-get-outta-this-JK mode.
Been there, done it.
@tcdawg
@patman
@JD30005
@Raisinhead
Sent from my iPhone using Tapatalk
-
https://atlanta.craigslist.org/atl/pts/d/atlanta-unique-jeep-wrangler-jku-one-of/6911809875.html
That cage work looks unsafe at any speed
-
https://atlanta.craigslist.org/atl/pts/d/atlanta-unique-jeep-wrangler-jku-one-of/6911809875.html
That cage work looks unsafe at any speed
Are those mitered joints? Lol
-
https://atlanta.craigslist.org/atl/pts/d/atlanta-unique-jeep-wrangler-jku-one-of/6911809875.html
That cage work looks unsafe at any speed
Are those mitered joints? Lol
Read the ad, they are custom.
All I saw was rebuilt title & $30k.
-
https://atlanta.craigslist.org/atl/pts/d/atlanta-unique-jeep-wrangler-jku-one-of/6911809875.html
That cage work looks unsafe at any speed
Are those mitered joints? Lol
Read the ad, they are custom.
All I saw was rebuilt title & $30k.
I feel like I’ve seen this thing for sale before. If that flips, whoever’s in the back seat is gonna be decapitated.
Sent from my iPhone using Tapatalk
-
Eww
-
https://atlanta.craigslist.org/atl/pts/d/atlanta-unique-jeep-wrangler-jku-one-of/6911809875.html
That cage work looks unsafe at any speed
Are those mitered joints? Lol
Read the ad, they are custom.
All I saw was rebuilt title & $30k.
I feel like I’ve seen this thing for sale before. If that flips, whoever’s in the back seat is gonna be decapitated.
Sent from my iPhone using Tapatalk
Its been for sale before. It must be a crappy rebuild.
-
That silver Line-x is cool
-
https://atlanta.craigslist.org/atl/pts/d/atlanta-unique-jeep-wrangler-jku-one-of/6911809875.html
That cage work looks unsafe at any speed
Are those mitered joints? Lol
Read the ad, they are custom.
All I saw was rebuilt title & $30k.
I feel like I’ve seen this thing for sale before. If that flips, whoever’s in the back seat is gonna be decapitated.
Sent from my iPhone using Tapatalk
Its been for sale before. It must be a crappy rebuild.
Darn I missed it. 'musta been pretty bad if ads down already
(https://i.imgur.com/YOMsdBa.png)
-
(https://uploads.tapatalk-cdn.com/20190725/eed867e52950a31e1ff7ede89564ae4d.jpg)
Sent from my SM-G955U using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20190725/eed867e52950a31e1ff7ede89564ae4d.jpg)
Sent from my SM-G955U using Tapatalk
Yes please!
-
A bus on steroids.
-
(https://uploads.tapatalk-cdn.com/20190725/eed867e52950a31e1ff7ede89564ae4d.jpg)
Damn that's perfect!
-
(https://uploads.tapatalk-cdn.com/20190725/eed867e52950a31e1ff7ede89564ae4d.jpg)
Damn that's perfect!
Very cool. Parking at home would be interesting.
Do you need a CDL if used solely for personal transportation?
Sent from my SM-G960U using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20190725/eed867e52950a31e1ff7ede89564ae4d.jpg)
Damn that's perfect!
Very cool. Parking at home would be interesting.
Do you need a CDL if used solely for personal transportation?
Sent from my SM-G960U using Tapatalk
I believe the "not for hire" decal and tagging it as an RV negates the need for a CDL
-
the "not for hire" does remove the need for CDL but you will still need a type "F" I think it is for non-comercial straight truck. It's a simple written test about road rules and air brakes. Don't quote me on the type designation but just know you still have to have a license for the truck and since you aren't pulling a trailer you get one for a straight truck.
-
the "not for hire" does remove the need for CDL but you will still need a type "F" I think it is for non-comercial straight truck. It's a simple written test about road rules and air brakes. Don't quote me on the type designation but just know you still have to have a license for the truck and since you aren't pulling a trailer you get one for a straight truck.
Over 26,000 lbs you need a class E or F license for a RV.
-
(https://uploads.tapatalk-cdn.com/20190801/f619ab8c97cf568be7e0c59a37d5a4aa.jpg)
Low miles and “locket” per description
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20190801/f619ab8c97cf568be7e0c59a37d5a4aa.jpg)
Low miles and “locket” per description
Sent from my iPhone using Tapatalk
why ya think so low a price? Lotta housing . is that low pinion ?
-
(https://uploads.tapatalk-cdn.com/20190801/f619ab8c97cf568be7e0c59a37d5a4aa.jpg)
Low miles and “locket” per description
Sent from my iPhone using Tapatalk
why ya think so low a price? Lotta housing . is that low pinion ?
IIRC they are all high pinion. Here is a good resource though if you're interested in it: https://www.pirate4x4.com/forum/chevy/522333-dana-70-thread.html
-
"why ya think so low a price? Lotta housing . is that low pinion ?"
it's the 10 lug 70 high pinion. gear sets are limited.
*70-High Pinion (unkown offset, 2000ish+ Kodiak/Top Kick K4500/K5500 fronts) 10 lug high pinion 70, with 1550 joints (a 60 uses 1480) 5.13 gears are the only ones available for these axles.
-
That's a rear axle.
-
That's a rear axle.
I missed that. I was just going by the 10 lugs. Since the ends are not tapered I'm sure its not the D70HD though.
-
Good deal on new Warn winches if you're in the market(https://uploads.tapatalk-cdn.com/20190802/aab5843b84db26556728947d4e14448c.jpg)(https://uploads.tapatalk-cdn.com/20190802/d95cf6564f93827a9f9d98e6774f7565.jpg)
Sent from my SM-G955U using Tapatalk
-
that's'a good price for a 9.0rc
-
Good deal on new Warn winches if you're in the market(https://uploads.tapatalk-cdn.com/20190802/aab5843b84db26556728947d4e14448c.jpg)(https://uploads.tapatalk-cdn.com/20190802/d95cf6564f93827a9f9d98e6774f7565.jpg)
Sent from my SM-G955U using Tapatalk
Was not familiar w that page on the book of Face. Rock Crawler Flea Market. It’s a good one. All kinds of stuff for sale
-
Great deal
-
No no no....don't read this Kevin
-
lmao
-
(https://uploads.tapatalk-cdn.com/20190814/df21834069079f67ed93d3bb83d81ded.jpg)
Sent from my iPhone using Tapatalk
-
Hrmmm
-
Sent from my iPhone using Tapatalk
New ones are cheaper than that.
Filthy was the cheapest I saw at 769 each. Where did you see the sticky version for less than 575?
-
Hrmmm
Do it.
-
Sent from my iPhone using Tapatalk
New ones are cheaper than that.
Filthy was the cheapest I saw at 769 each. Where did you see the sticky version for less than 575?
Busted knuckle was 2700 when I bought my set last month. They was on sale but worth checking with them.
Edit. I fat fingered the phone on the price.
-
Sent from my iPhone using Tapatalk
New ones are cheaper than that.
Filthy was the cheapest I saw at 769 each. Where did you see the sticky version for less than 575?
Busted knuckle was 1700 when I bought my set last month. They was on sale but worth checking with them.
Wow that's a steal! Nice pickup!
-
Check with Scott Goforth (I think I miss spelled his last name.)
Sent from my Pixel 3 XL using Tapatalk
-
..
-
If they were only 35's.....
-
If they were only 35's.....
I thought about grabbing them but we gotta have something with better road manners.
-
VKS Fab is having a Labor Day sale. Enter code LD19. Looking at a bumper it’s good for 15%, not sure if that’s across the board.
Sent from my iPhone using Tapatalk
-
Northridge 4x4 is having a 15% off Flash Sale on all PSC stuff.
https://www.northridge4x4.com/brand/psc?trk_msg=DPHJAV39C4L4V0JDHT7I9ORED8&trk_contact=I007N07T6Q3ND4M0HPH5MHTFIO&trk_sid=BHESANE3P6KNBKAKRL773NECEK&utm_source=listrak&utm_medium=email&utm_term=https%3a%2f%2fwww.northridge4x4.com%2fbrand%2fpsc&utm_campaign=PSC+Weekend+Flash+Sale!
-
Decent price on a nice tranny cooler with fan.
Derale Cooler 13900
https://r.tapatalk.com/shareLink?share_fid=32116&share_tid=61176&url=http%3A%2F%2Fwww%2Ehardlinecrawlers%2Ecom%2Fforums%2Findex%2Ephp%3Ftopic%3D61176&share_type=t
-
This is a good impact. One of tools you don’t know how you lived without after you get one. I never use my pneumatic impacts anymore.
(https://uploads.tapatalk-cdn.com/20190928/8a6df4c5f9ca5e649d543e09258bfe90.jpg)
Sent from my iPhone using Tapatalk
-
Yes sir.
I have 2 of them. One is HD & one goes up to 350 foot lbs.
I got the smaller one with a drill/hammer drill for $100 @ Home Depot on clearance.
No cords is the best part.
Believe it or not the HF model is supposed to be 99% as good as the Milwaukee brand. It costs $180 without a coupon.
-
Looks like its $269 with a battery. The Milwaukee is $259 without a battery.
-
This is a good impact. One of tools you don’t know how you lived without after you get one. I never use my pneumatic impacts anymore.
(https://uploads.tapatalk-cdn.com/20190928/8a6df4c5f9ca5e649d543e09258bfe90.jpg)
Sent from my iPhone using Tapatalk
I can’t live without mine. It’s the best tool I own.
-
This is a good impact. One of tools you don’t know how you lived without after you get one. I never use my pneumatic impacts anymore.
(https://uploads.tapatalk-cdn.com/20190928/8a6df4c5f9ca5e649d543e09258bfe90.jpg)
Sent from my iPhone using Tapatalk
I also stopped using pneumatic tools after buying a 1/2 impact and 1/4 nut driver.
Sent from my Pixel 3 XL using Tapatalk
-
I don’t have any details on this sweet ass ride - just heard someone on here was looking at lj’s
Hint : his name starts with D and it’s four letters
(https://uploads.tapatalk-cdn.com/20191004/d0ee1a0d2144e91c96c1bab68c38a04e.jpg)
Sent from my iPhone using Tapatalk
-
I don’t have any details on this sweet ass ride - just heard someone on here was looking at lj’s
Hint : his name starts with D and it’s four letters
(https://uploads.tapatalk-cdn.com/20191004/d0ee1a0d2144e91c96c1bab68c38a04e.jpg)
Sent from my iPhone using Tapatalk
Dick? Duck? Dawg? Dogg? Ohhhh
Sent from my SM-G960U using Tapatalk
-
I think he goes by the alias Truck Trader
-
I don’t have any details on this sweet ass ride - just heard someone on here was looking at lj’s
Hint : his name starts with D and it’s four letters
(https://uploads.tapatalk-cdn.com/20191004/d0ee1a0d2144e91c96c1bab68c38a04e.jpg)
Sent from my iPhone using Tapatalk
Is that the first LJ genright finished with the tracer suspension?
Sent from my iPhone using Tapatalk Pro
-
I don’t have any details on this sweet ass ride - just heard someone on here was looking at lj’s
Hint : his name starts with D and it’s four letters
(https://uploads.tapatalk-cdn.com/20191004/d0ee1a0d2144e91c96c1bab68c38a04e.jpg)
Sent from my iPhone using Tapatalk
$56k??
Sent from my iPhone using Tapatalk
-
smokin crack if that's their asking price
-
smokin crack if that's their asking price
Lots of it.
-
I don’t have any details on this sweet ass ride - just heard someone on here was looking at lj’s
Hint : his name starts with D and it’s four letters
(https://uploads.tapatalk-cdn.com/20191004/d0ee1a0d2144e91c96c1bab68c38a04e.jpg)
Sent from my iPhone using Tapatalk
Nice color choice......
-
Not going to last long...(https://uploads.tapatalk-cdn.com/20191015/726b9245c4d5a271c19e13caeb289075.jpg)
Sent from my SM-G955U using Tapatalk
-
Not going to last long...(https://uploads.tapatalk-cdn.com/20191015/726b9245c4d5a271c19e13caeb289075.jpg)
Sent from my SM-G955U using Tapatalk
Thats a hell of a price @j3ff3ry_j33p
-
(https://uploads.tapatalk-cdn.com/20191016/94ace90333322b13fae641072de63349.jpg)
Sent from my iPhone using Tapatalk
-
Not a bad deal. (https://uploads.tapatalk-cdn.com/20191016/974daebd30be03753b8a442234ea6229.jpg)
-
Not a bad deal. (https://uploads.tapatalk-cdn.com/20191016/974daebd30be03753b8a442234ea6229.jpg)
I do love a good "Rick" crawler
-
lols. no such thing as 4.38s either
-
This seems k like a decent deal!
https://www.facebook.com/groups/948428678525475/permalink/2837052059663118/?sale_post_id=2837052059663118
Sent from my SM-G975U using Tapatalk
-
Just saw this on Facebook
https://www.facebook.com/marketplace/item/2415204388695552/
-
Just saw this on Facebook
https://www.facebook.com/marketplace/item/2415204388695552/
Chubby Chaser 2.0
-
Not going to last long...(https://uploads.tapatalk-cdn.com/20191015/726b9245c4d5a271c19e13caeb289075.jpg)
That’s a killer deal!
Sent from my iPhone using Tapatalk
-
https://atlanta.craigslist.org/eat/pts/d/buckhead-08-jeep-rock-crawler-part-out/7005935174.html
JK part out
Sent from my iPhone using Tapatalk
-
These will go fast
-
(https://uploads.tapatalk-cdn.com/20191101/1f1de86d35d69aac8c2aea69ce63cc3d.jpg)
-
(https://uploads.tapatalk-cdn.com/20191101/1f1de86d35d69aac8c2aea69ce63cc3d.jpg)
@j3ff3ry_j33p go get it!!
-
479 area code is Arkansas
-
479 area code is Arkansas
Zip says Benton. Super close for @j3ff3ry_j33p ;)
-
Ahh... didnt realize that was the ZC.
-
@Carlos LOBO you still looking?
Hi Doug, Thanks for this but I had some personal issues, now I'm back in the market looking for a built Rubicon >2007, pref. >2012...
Cheers.
-
@Carlos LOBO
https://www.facebook.com/groups/948428678525475/permalink/2863290693705921/?sale_post_id=2863290693705921
Sent from my SM-G975U using Tapatalk
-
@Carlos LOBO
https://www.facebook.com/groups/948428678525475/permalink/2863290693705921/?sale_post_id=2863290693705921
Sent from my SM-G975U using Tapatalk
Also @jefferyjeep... how the hell do you spell your name...
-
@Carlos LOBO
https://www.facebook.com/groups/948428678525475/permalink/2863290693705921/?sale_post_id=2863290693705921
Sent from my SM-G975U using Tapatalk
Also @jefferyjeep... how the hell do you spell your name...
@j3ff3ry_j33p
Sent from my SM-G975U using Tapatalk
-
I like this one!
@j3ff3ry_j33p and @Carlos LOBO
https://www.facebook.com/groups/crawlerfleamarket/permalink/2324968427813272/?sale_post_id=2324968427813272
Sent from my SM-G975U using Tapatalk
-
This looks like a hot mess.
https://www.facebook.com/marketplace/item/2157787607855549/
-
Bolt in Tons for a JK for $3,900
https://www.facebook.com/marketplace/item/476745766239484/
-
Bolt in Tons for a JK for $3,900
https://www.facebook.com/marketplace/item/476745766239484/
Man I thought damn what a steal then I realized how much it doesn’t have. Not half way to bolt in and go. Could be a good base to start with though.
Good luck with steering with that solid front cover.
-
Bolt in Tons for a JK for $3,900
https://www.facebook.com/marketplace/item/476745766239484/
Man I thought damn what a steal then I realized how much it doesn’t have. Not half way to bolt in and go. Could be a good base to start with though.
Good luck with steering with that solid front cover.
Didn’t look that closely - that’s pretty lame. They’ll bolt in, but still need a lot of work. 3k would be more like it
Sent from my iPhone using Tapatalk
-
New tow pig?
https://freightliner.taketheoffer364.com/
-
New tow pig?
https://freightliner.taketheoffer364.com/
when that rig was new, those power and torque numbers were bad ass.
Now, you can get that 1000 ft/lbs of torque from a plain jane, bone stock Ram/Duramax/Superduty 2500 all day long. Pretty crazy.
-
That thing is sweet!
-
That would make a nice daily driver.
-
Hard to find a better dedicated tow rig for that cost. I'm not to familiar with these, does that back seat lay all the way down?
(https://i.imgur.com/OOaUx9F.jpg)
-
That's badazz
-
I used to extrude all the aluminum for Freightliner truck grilles....
-
I love it...but it's a dedicated vehicle, which isn't for me ATM.
Sent from my SM-G960U using Tapatalk
-
Hard to find a better dedicated tow rig for that cost. I'm not to familiar with these, does that back seat lay all the way down?
(https://i.imgur.com/OOaUx9F.jpg)
Yes, that power folds into a bed.
I need this!
-
New tow pig?
https://freightliner.taketheoffer364.com/
So I have spent some time looking at comparable s and I am starting to think this ad must be a scam....or a great deal that I need to buy immediately
-
New tow pig?
https://freightliner.taketheoffer364.com/
So I have spent some time looking at comparable s and I am starting to think this ad must be a scam....or a great deal that I need to buy immediately
Looking for that eBay fine print that says "Item in picture is not the item being sold"?
-
New tow pig?
https://freightliner.taketheoffer364.com/
So I have spent some time looking at comparable s and I am starting to think this ad must be a scam....or a great deal that I need to buy immediately
It's a scam. At least the email address has been reported as a scam address
https://db.aa419.org/fakebanksview.php?key=136671
Edit: Man she has a lot of trucks! http://www.freightliner11sc.com/
https://www.facebook.com/pg/2OO7-Chevrolet-Silverado-Z71-LTZ-1422778781132743/posts/
http://jingletruck.com/2011-freightliner-sport-chassis-125664
-
It is or is not a scam? @TravisMac
-
New tow pig?
https://freightliner.taketheoffer364.com/
So I have spent some time looking at comparable s and I am starting to think this ad must be a scam....or a great deal that I need to buy immediately
Scam came to my mind
Sent from my SM-G960U using Tapatalk
-
It is or is not a scam? @TravisMac
100%
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20191204/e24e9480cb8a2789198f458f3f554244.plist)(https://uploads.tapatalk-cdn.com/20191204/279afd0571b4266a2c12d3d0677d952a.plist)
-
^That's not a bad deal!
-
^That's not a bad deal!
damn
a smokin deal if you ask me. although I am not familiar with the 5.7...is that a hemi?
-
^That's not a bad deal!
damn
a smokin deal if you ask me. although I am not familiar with the 5.7...is that a hemi?
Sounds like a dodge.
Either way, 15k sounds like an awesome deal for that part list
-
^That's not a bad deal!
damn
a smokin deal if you ask me. although I am not familiar with the 5.7...is that a hemi?
Both chevy and mopar made a 5.7
-
^That's not a bad deal!
damn
a smokin deal if you ask me. although I am not familiar with the 5.7...is that a hemi?
Could be an actual LS1 5.7 or could be a old school chevy 5.7. It is possible that is hemi but unlikely with the TH400.
-
On Board Air deal -
FS from another forum I visit.
If someone was looking for an OBA setup, this is under half what it'd cost at Dominion/SWAG + from a reliable seller.
https://www.jkowners.com/forum/sale/385736-oba-kit.html#post4476492
-
On Board Air deal -
FS from another forum I visit.
If someone was looking for an OBA setup, this is under half what it'd cost at Dominion/SWAG + from a reliable seller.
https://www.jkowners.com/forum/sale/385736-oba-kit.html#post4476492
Can it regulated to work with arb's, if you know?
Sent from my SM-N960U using Tapatalk
-
On Board Air deal -
FS from another forum I visit.
If someone was looking for an OBA setup, this is under half what it'd cost at Dominion/SWAG + from a reliable seller.
https://www.jkowners.com/forum/sale/385736-oba-kit.html#post4476492
Can it regulated to work with arb's, if you know?
Sent from my SM-N960U using Tapatalk
You can use air from a tank to run an air locker. Yes.
-
Someone could have a lot of fun with this...
(https://uploads.tapatalk-cdn.com/20200112/65498527479bd2d87c47cecd04b5f6a1.png)
Sent from my iPhone using Tapatalk
-
Damn!!
-
Someone could have a lot of fun with this...
(https://uploads.tapatalk-cdn.com/20200112/65498527479bd2d87c47cecd04b5f6a1.png)
Sent from my iPhone using Tapatalk
I may ask about the cat carrier, when I go to pick up the Jeep.
Kind-of kidding, of course.
-
Someone could have a lot of fun with this...
(https://uploads.tapatalk-cdn.com/20200112/65498527479bd2d87c47cecd04b5f6a1.png)
Sent from my iPhone using Tapatalk
I may ask about the cat carrier, when I go to pick up the Jeep.
Kind-of kidding, of course.
No way you’re fitting all 8 cats in that little thing
-
Someone could have a lot of fun with this...
(https://uploads.tapatalk-cdn.com/20200112/65498527479bd2d87c47cecd04b5f6a1.png)
Sent from my iPhone using Tapatalk
I may ask about the cat carrier, when I go to pick up the Jeep.
Kind-of kidding, of course.
No way you’re fitting all 8 cats in that little thing
It would be a dedicated carrier for one cat.
Sent from my SM-G960U using Tapatalk
-
Someone could have a lot of fun with this...
(https://uploads.tapatalk-cdn.com/20200112/65498527479bd2d87c47cecd04b5f6a1.png)
Sent from my iPhone using Tapatalk
I may ask about the cat carrier, when I go to pick up the Jeep.
Kind-of kidding, of course.
No way you’re fitting all 8 cats in that little thing
It would be a dedicated carrier for one cat.
Sent from my SM-G960U using Tapatalk
And you'd have a pimp step stool
-
Someone could have a lot of fun with this...
(https://uploads.tapatalk-cdn.com/20200112/65498527479bd2d87c47cecd04b5f6a1.png)
Sent from my iPhone using Tapatalk
What the hell
(https://uploads.tapatalk-cdn.com/20200113/7d375b626e10fa13da3f4330bbf22367.jpg)
-
Someone could have a lot of fun with this...
(https://uploads.tapatalk-cdn.com/20200112/65498527479bd2d87c47cecd04b5f6a1.png)
Sent from my iPhone using Tapatalk
What the hell
(https://uploads.tapatalk-cdn.com/20200113/7d375b626e10fa13da3f4330bbf22367.jpg)
Is the dude huffing gas?! Strict no smoking policy in that rig!
Sent from my iPhone using Tapatalk
-
What the hell
(https://uploads.tapatalk-cdn.com/20200113/7d375b626e10fa13da3f4330bbf22367.jpg)
Isn't that a redneck version of this?
-
So you guys don’t like gas potentially pouring on you as you ride in the back of that thing? 🤷🏻♂️
-
So you guys don’t like gas potentially pouring on you as you ride in the back of that thing?
Haha yep.
Call me crazy, but I’m not cool w that
-
So you guys don’t like gas potentially pouring on you as you ride in the back of that thing? 🤷🏻♂️
Keeps the bugs away. I'm just going to use a mist system to spray high octane every where
-
https://chassisunlimited.com/offroad/clearance-sale.html?p=1&redirect_mongo_id=5e31e54dfccbf60047a2b8ba&utm_campaign=5e31e54dfccbf60047a2b8b9&utm_medium=Email&utm_source=Springbot
a couple of us are building again, got this email today, killer prices on tabs and gussets
-
https://chassisunlimited.com/offroad/clearance-sale.html?p=1&redirect_mongo_id=5e31e54dfccbf60047a2b8ba&utm_campaign=5e31e54dfccbf60047a2b8b9&utm_medium=Email&utm_source=Springbot
a couple of us are building again, got this email today, killer prices on tabs and gussets
Some really cool stuff there.
Sent from my SM-G960U using Tapatalk
-
https://chassisunlimited.com/offroad/clearance-sale.html?p=1&redirect_mongo_id=5e31e54dfccbf60047a2b8ba&utm_campaign=5e31e54dfccbf60047a2b8b9&utm_medium=Email&utm_source=Springbot
a couple of us are building again, got this email today, killer prices on tabs and gussets
Some really cool stuff there.
Sent from my SM-G960U using Tapatalk
those gussets with a bottle opener are epic
-
https://chassisunlimited.com/offroad/clearance-sale.html?p=1&redirect_mongo_id=5e31e54dfccbf60047a2b8ba&utm_campaign=5e31e54dfccbf60047a2b8b9&utm_medium=Email&utm_source=Springbot
a couple of us are building again, got this email today, killer prices on tabs and gussets
Thanks! got some dimple die plates to church up my cooler rack
-
https://www.harborfreight.com/merchandising-promotions/new/12000-lb-80-ft-x-38-in-synthetic-winch-rope-56412.html
-
https://www.harborfreight.com/merchandising-promotions/new/12000-lb-80-ft-x-38-in-synthetic-winch-rope-56412.html
still better than the Doug cable we got a few years ago! LOL
-
https://www.harborfreight.com/merchandising-promotions/new/12000-lb-80-ft-x-38-in-synthetic-winch-rope-56412.html
still better than the Doug cable we got a few years ago! LOL
I still have mine in the package. Is it not any good?
Maybe make a few soft shackles & grab handles with it?
-
https://www.harborfreight.com/merchandising-promotions/new/12000-lb-80-ft-x-38-in-synthetic-winch-rope-56412.html
still better than the Doug cable we got a few years ago! LOL
I still have mine in the package. Is it not any good?
Maybe make a few soft shackles & grab handles with it?
I have mine as a winch extension rope in my recovery bag. Used it a few times. Works fine
-
https://www.harborfreight.com/merchandising-promotions/new/12000-lb-80-ft-x-38-in-synthetic-winch-rope-56412.html
still better than the Doug cable we got a few years ago! LOL
I still have mine in the package. Is it not any good?
Maybe make a few soft shackles & grab handles with it?
I have mine as a winch extension rope in my recovery bag. Used it a few times. Works fine
I still use my DOUG rope, works great.
-
Ok. I guess I'll keep it as a spare then. Thank you.
-
I used my Doug rope on my SuperWinch a ton.....its still on the
winch (in the basement)
Never really used the 50' rope though
and still got it.
-
Doug's rope has been on the front of my buggy for a few years. I have nothing bad to say about it.
-
Doug rope pulled about 10 rigs at AOP last summer up that new trail with that super steep muddy hill that was so fun. Pretty sure the only ones it didnt pull were me and Steve.. oh yeah, we made it on our own power...
-
This is not a CL deal nor is it a good deal. More of a warning and a reminder. I found an engine on Face Book Market (in GA). There was an ad for 2003 6.0 LS with 123k miles for $650. I watched for a few days and kept thinking that I needed to jump on this. So I started doing a little research on that specific year and while I was looking around I found the same engine for sale on eBay, except, it had different mileage and was in a different state with a different price. So, I thought maybe he just used the picture from eBay. If that is what he did then he should have said that in his ad and because he didn't I already decided that its a scam. I sent him a question asking if he knew if it was an LQ4 or LQ9. He responded within a few minutes saying that he doesn't know. Next question I asked if the picture he posted was the actual engine? If, not, can you send me a pic of the actual engine. No response lol. My guess is that he probably would have wanted some money up front or something never to be seen again, I don't know, I didn't make that far.
The first picture is from the guys ad on FB and the second is from the eBay ad.
-
The grey $100 rope, correct?
-
Doug rope pulled about 10 rigs at AOP last summer up that new trail with that super steep muddy hill that was so fun. Pretty sure the only ones it didnt pull were me and Steve.. oh yeah, we made it on our own power...
You forgot about me making it, but my attempt was so effortless that it wasnt memorable
-
Doug rope pulled about 10 rigs at AOP last summer up that new trail with that super steep muddy hill that was so fun. Pretty sure the only ones it didnt pull were me and Steve.. oh yeah, we made it on our own power...
You forgot about me making it, but my attempt was so effortless that it wasnt memorable
so slow and smokey it was hard to see
-
This is not a CL deal nor is it a good deal. More of a warning and a reminder. I found an engine on Face Book Market (in GA). There was an ad for 2003 6.0 LS with 123k miles for $650. I watched for a few days and kept thinking that I needed to jump on this. So I started doing a little research on that specific year and while I was looking around I found the same engine for sale on eBay, except, it had different mileage and was in a different state with a different price. So, I thought maybe he just used the picture from eBay. If that is what he did then he should have said that in his ad and because he didn't I already decided that its a scam. I sent him a question asking if he knew if it was an LQ4 or LQ9. He responded within a few minutes saying that he doesn't know. Next question I asked if the picture he posted was the actual engine? If, not, can you send me a pic of the actual engine. No response lol. My guess is that he probably would have wanted some money up front or something never to be seen again, I don't know, I didn't make that far.
The first picture is from the guys ad on FB and the second is from the eBay ad.
Putting an LS in the Truck? Chuck?
-
This is not a CL deal nor is it a good deal. More of a warning and a reminder. I found an engine on Face Book Market (in GA). There was an ad for 2003 6.0 LS with 123k miles for $650. I watched for a few days and kept thinking that I needed to jump on this. So I started doing a little research on that specific year and while I was looking around I found the same engine for sale on eBay, except, it had different mileage and was in a different state with a different price. So, I thought maybe he just used the picture from eBay. If that is what he did then he should have said that in his ad and because he didn't I already decided that its a scam. I sent him a question asking if he knew if it was an LQ4 or LQ9. He responded within a few minutes saying that he doesn't know. Next question I asked if the picture he posted was the actual engine? If, not, can you send me a pic of the actual engine. No response lol. My guess is that he probably would have wanted some money up front or something never to be seen again, I don't know, I didn't make that far.
The first picture is from the guys ad on FB and the second is from the eBay ad.
Putting an LS in the Truck? Chuck?
For $650 I was thinking about it lol.
Sent from my SM-G975U using Tapatalk
-
Doug rope pulled about 10 rigs at AOP last summer up that new trail with that super steep muddy hill that was so fun. Pretty sure the only ones it didnt pull were me and Steve.. oh yeah, we made it on our own power...
You forgot about me making it, but my attempt was so effortless that it wasnt memorable
Pretty sure I showed you guys the line on this one.
-
Doug rope pulled about 10 rigs at AOP last summer up that new trail with that super steep muddy hill that was so fun. Pretty sure the only ones it didnt pull were me and Steve.. oh yeah, we made it on our own power...
You forgot about me making it, but my attempt was so effortless that it wasnt memorable
Pretty sure I showed you guys the line on this one.
I am 99% sure I made that hill
-
Doug rope pulled about 10 rigs at AOP last summer up that new trail with that super steep muddy hill that was so fun. Pretty sure the only ones it didnt pull were me and Steve.. oh yeah, we made it on our own power...
You forgot about me making it, but my attempt was so effortless that it wasnt memorable
Pretty sure I showed you guys the line on this one.
I am 99% sure I made that hill
Ditto
Sent from my SM-G960U using Tapatalk
-
Justin got out in front of this with the "two of us made it" story... so that's the official record at this point. Sorry guys. A video could be used to change the record.
-
Justin got out in front of this with the "two of us made it" story... so that's the official record at this point. Sorry guys. A video could be used to change the record.
I have video of clark making it, and Justin struggling up before he realizes he didnt turn on the rear locker (again). How do I load them to the forum?
-
Send it to me.
-
Justin got out in front of this with the "two of us made it" story... so that's the official record at this point. Sorry guys. A video could be used to change the record.
I have video of clark making it, and Justin struggling up before he realizes he didnt turn on the rear locker (again). How do I load them to the forum?
To be honest, I don't even recall the event or situation; What Tony said seemed like a good response, so I wanted to co-opt it.
-
Justin got out in front of this with the "two of us made it" story... so that's the official record at this point. Sorry guys. A video could be used to change the record.
I have video of clark making it, and Justin struggling up before he realizes he didnt turn on the rear locker (again). How do I load them to the forum?
To be honest, I don't even recall the event or situation; What Tony said seemed like a good response, so I wanted to co-opt it.
First trail of the day, we went looking for Little Caesars, got lost, followed the main trail around and this was the first obstacle. Everyone started pulling winch rope after watching Robbie, but only one other person used it from what I recall
-
^^ also, I just assume that I made it up whatever Justin did.
-
Justin got out in front of this with the "two of us made it" story... so that's the official record at this point. Sorry guys. A video could be used to change the record.
I have video of clark making it, and Justin struggling up before he realizes he didnt turn on the rear locker (again). How do I load them to the forum?
To be honest, I don't even recall the event or situation; What Tony said seemed like a good response, so I wanted to co-opt it.
First trail of the day, we went looking for Little Caesars, got lost, followed the main trail around and this was the first obstacle. Everyone started pulling winch rope after watching Robbie, but only one other person used it from what I recall
Oh yeah...I 'member.
I don't recall Justin making it...hmm
Sent from my SM-G960U using Tapatalk
-
Justin got out in front of this with the "two of us made it" story... so that's the official record at this point. Sorry guys. A video could be used to change the record.
I have video of clark making it, and Justin struggling up before he realizes he didnt turn on the rear locker (again). How do I load them to the forum?
To be honest, I don't even recall the event or situation; What Tony said seemed like a good response, so I wanted to co-opt it.
First trail of the day, we went looking for Little Caesars, got lost, followed the main trail around and this was the first obstacle. Everyone started pulling winch rope after watching Robbie, but only one other person used it from what I recall
Oh yeah...I 'member.
I don't recall Justin making it...hmm
Sent from my SM-G960U using Tapatalk
Justin made it. I was there and I remember him sending Loki up to us because he was going to be getting on it to clear the obstacle. Jay sent Charlie up to hang with the observers too.
-
Justin got out in front of this with the "two of us made it" story... so that's the official record at this point. Sorry guys. A video could be used to change the record.
I have video of clark making it, and Justin struggling up before he realizes he didnt turn on the rear locker (again). How do I load them to the forum?
To be honest, I don't even recall the event or situation; What Tony said seemed like a good response, so I wanted to co-opt it.
First trail of the day, we went looking for Little Caesars, got lost, followed the main trail around and this was the first obstacle. Everyone started pulling winch rope after watching Robbie, but only one other person used it from what I recall
So this all took place on the access trail while “looking” for little ceasers?
Sent from my iPhone using Tapatalk
-
Justin got out in front of this with the "two of us made it" story... so that's the official record at this point. Sorry guys. A video could be used to change the record.
I have video of clark making it, and Justin struggling up before he realizes he didnt turn on the rear locker (again). How do I load them to the forum?
To be honest, I don't even recall the event or situation; What Tony said seemed like a good response, so I wanted to co-opt it.
First trail of the day, we went looking for Little Caesars, got lost, followed the main trail around and this was the first obstacle. Everyone started pulling winch rope after watching Robbie, but only one other person used it from what I recall
So this all took place on the access trail while “looking” for little ceasers?
Sent from my iPhone using Tapatalk
Yup
Sent from my SM-G960U using Tapatalk
-
Justin got out in front of this with the "two of us made it" story... so that's the official record at this point. Sorry guys. A video could be used to change the record.
I have video of clark making it, and Justin struggling up before he realizes he didnt turn on the rear locker (again). How do I load them to the forum?
To be honest, I don't even recall the event or situation; What Tony said seemed like a good response, so I wanted to co-opt it.
First trail of the day, we went looking for Little Caesars, got lost, followed the main trail around and this was the first obstacle. Everyone started pulling winch rope after watching Robbie, but only one other person used it from what I recall
So this all took place on the access trail while “looking” for little ceasers?
Sent from my iPhone using Tapatalk
Yup
Sent from my SM-G960U using Tapatalk
if only you were there to wheel instead of a car show you couldve showed us
-
Justin got out in front of this with the "two of us made it" story... so that's the official record at this point. Sorry guys. A video could be used to change the record.
I have video of clark making it, and Justin struggling up before he realizes he didnt turn on the rear locker (again). How do I load them to the forum?
To be honest, I don't even recall the event or situation; What Tony said seemed like a good response, so I wanted to co-opt it.
First trail of the day, we went looking for Little Caesars, got lost, followed the main trail around and this was the first obstacle. Everyone started pulling winch rope after watching Robbie, but only one other person used it from what I recall
So this all took place on the access trail while “looking” for little ceasers?
Sent from my iPhone using Tapatalk
Yup
Sent from my SM-G960U using Tapatalk
if only you were there to wheel instead of a car show you couldve showed us
I'd consider giving him a pass, if he had won..
-
Posted on Jeep’s on Tons FB page. Thinking about flipping mine and having my friends pay for it.
(https://uploads.tapatalk-cdn.com/20200219/ebbac414eebbde3a5e4909119548fecc.plist)
(https://uploads.tapatalk-cdn.com/20200219/293faf5fc0d6fe753a55fc9dd81eac87.plist)
(https://uploads.tapatalk-cdn.com/20200219/952e99a9a3f7d9eefefe94664601b36d.plist)
-
Nice find!
-
Posted on Jeep’s on Tons FB page. Thinking about flipping mine and having my friends pay for it.
(https://uploads.tapatalk-cdn.com/20200219/ebbac414eebbde3a5e4909119548fecc.plist)
(https://uploads.tapatalk-cdn.com/20200219/293faf5fc0d6fe753a55fc9dd81eac87.plist)
(https://uploads.tapatalk-cdn.com/20200219/952e99a9a3f7d9eefefe94664601b36d.plist)
D60 rear....WNB
-
^^ Probably has four straight axle shafts, tho.
Sent from my iPhone using Tapatalk
-
"^^ Probably has four straight axle shafts, tho"
[nutshot]
-
....
-
^^ Probably has four straight axle shafts, tho.
Sent from my iPhone using Tapatalk
Crap, I’m literally laughing out loud.
-
So its only 79" wide so the tons are not full width?
-
@Big Dave - far away, but @Chris36l will go pick it up for you. He loves a road trip
-
@Big Dave - far away, but @Chris36l will go pick it up for you. He loves a road trip
Pat loves road trips as well.
Thanks but I'm supposed to pick up a fairly complete 92 XJ sometime this week.
-
@Big Dave - far away, but @Chris36l will go pick it up for you. He loves a road trip
Pat loves road trips as well.
Thanks but I'm supposed to pick up a fairly complete 92 XJ sometime this week.
Let me know if you need any help David
I have a winch on my trailer if needed...
-
@Big Dave - far away, but @Chris36l will go pick it up for you. He loves a road trip
I do love me a good road trip.
Sent from my iPhone using Tapatalk
-
For any TJ guys who might need this
-
Good deal or no deal?
2011 6.0 w/ ~127k, harness, ecm, all accessories, and a 6l90 + tcase (not that I need it)
$2,300
(https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/p720x720/88932335_10218925563561685_431023113732358144_o.jpg?_nc_cat=108&_nc_sid=3b2858&_nc_ohc=KgJk3dJZ-ScAX-hl6-2&_nc_ht=scontent-atl3-1.xx&_nc_tp=6&oh=97a08174e8f5276799b2df379fd41b2c&oe=5E91B70E)
-
Good deal or no deal?
2011 6.0 w/ ~127k, harness, ecm, all accessories, and a 6l90 + tcase (not that I need it)
$2,300
(https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/p720x720/88932335_10218925563561685_431023113732358144_o.jpg?_nc_cat=108&_nc_sid=3b2858&_nc_ohc=KgJk3dJZ-ScAX-hl6-2&_nc_ht=scontent-atl3-1.xx&_nc_tp=6&oh=97a08174e8f5276799b2df379fd41b2c&oe=5E91B70E)
Terrible deal...send link to me though.
Sent from my SM-G960U using Tapatalk
-
Good deal or no deal?
2011 6.0 w/ ~127k, harness, ecm, all accessories, and a 6l90 + tcase (not that I need it)
$2,300
(https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/p720x720/88932335_10218925563561685_431023113732358144_o.jpg?_nc_cat=108&_nc_sid=3b2858&_nc_ohc=KgJk3dJZ-ScAX-hl6-2&_nc_ht=scontent-atl3-1.xx&_nc_tp=6&oh=97a08174e8f5276799b2df379fd41b2c&oe=5E91B70E)
Terrible deal...send link to me though.
Sent from my SM-G960U using Tapatalk
@Trailabite - what did you just pay for your engine/tranny?
-
Good deal or no deal?
2011 6.0 w/ ~127k, harness, ecm, all accessories, and a 6l90 + tcase (not that I need it)
$2,300
(https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/p720x720/88932335_10218925563561685_431023113732358144_o.jpg?_nc_cat=108&_nc_sid=3b2858&_nc_ohc=KgJk3dJZ-ScAX-hl6-2&_nc_ht=scontent-atl3-1.xx&_nc_tp=6&oh=97a08174e8f5276799b2df379fd41b2c&oe=5E91B70E)
I would say it’s a reasonable deal.
The 6L90 trans is longer and heavier than the 6L80 but also stronger. It would be a good trans and can do tap shift.
-
Good deal or no deal?
2011 6.0 w/ ~127k, harness, ecm, all accessories, and a 6l90 + tcase (not that I need it)
$2,300
(https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/p720x720/88932335_10218925563561685_431023113732358144_o.jpg?_nc_cat=108&_nc_sid=3b2858&_nc_ohc=KgJk3dJZ-ScAX-hl6-2&_nc_ht=scontent-atl3-1.xx&_nc_tp=6&oh=97a08174e8f5276799b2df379fd41b2c&oe=5E91B70E)
Terrible deal...send link to me though.
Sent from my SM-G960U using Tapatalk
@Trailabite - what did you just pay for your engine/tranny?
This is not a bad deal. I paid $1800 for what I have. But, I'm also missing the DBW gas pedal, the TAC, I have a broken coil pack and I'm missing a connector for one of the O2 sensors. Once you add all that in it's not too far off from $2300. I would start off with an offer around $1800 and see where it goes.
-
Good deal or no deal?
2011 6.0 w/ ~127k, harness, ecm, all accessories, and a 6l90 + tcase (not that I need it)
$2,300
(https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/p720x720/88932335_10218925563561685_431023113732358144_o.jpg?_nc_cat=108&_nc_sid=3b2858&_nc_ohc=KgJk3dJZ-ScAX-hl6-2&_nc_ht=scontent-atl3-1.xx&_nc_tp=6&oh=97a08174e8f5276799b2df379fd41b2c&oe=5E91B70E)
Terrible deal...send link to me though.
Sent from my SM-G960U using Tapatalk
@Trailabite - what did you just pay for your engine/tranny?
This is not a bad deal. I paid $1800 for what I have. But, I'm also missing the DBW gas pedal, the TAC, I have a broken coil pack and I'm missing a connector for one of the O2 sensors. Once you add all that in it's not too far off from $2300. I would start off with an offer around $1800 and see where it goes.
I think he'll do 2k without the transfer case - I shouldn't need anything off of it right?
-
Good deal or no deal?
2011 6.0 w/ ~127k, harness, ecm, all accessories, and a 6l90 + tcase (not that I need it)
$2,300
(https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/p720x720/88932335_10218925563561685_431023113732358144_o.jpg?_nc_cat=108&_nc_sid=3b2858&_nc_ohc=KgJk3dJZ-ScAX-hl6-2&_nc_ht=scontent-atl3-1.xx&_nc_tp=6&oh=97a08174e8f5276799b2df379fd41b2c&oe=5E91B70E)
Terrible deal...send link to me though.
Sent from my SM-G960U using Tapatalk
@Trailabite - what did you just pay for your engine/tranny?
This is not a bad deal. I paid $1800 for what I have. But, I'm also missing the DBW gas pedal, the TAC, I have a broken coil pack and I'm missing a connector for one of the O2 sensors. Once you add all that in it's not too far off from $2300. I would start off with an offer around $1800 and see where it goes.
I think he'll do 2k without the transfer case - I shouldn't need anything off of it right?
Nope. You will just need an adapter to your TC.
-
Good deal or no deal?
2011 6.0 w/ ~127k, harness, ecm, all accessories, and a 6l90 + tcase (not that I need it)
$2,300
(https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/p720x720/88932335_10218925563561685_431023113732358144_o.jpg?_nc_cat=108&_nc_sid=3b2858&_nc_ohc=KgJk3dJZ-ScAX-hl6-2&_nc_ht=scontent-atl3-1.xx&_nc_tp=6&oh=97a08174e8f5276799b2df379fd41b2c&oe=5E91B70E)
Terrible deal...send link to me though.
Sent from my SM-G960U using Tapatalk
@Trailabite - what did you just pay for your engine/tranny?
This is not a bad deal. I paid $1800 for what I have. But, I'm also missing the DBW gas pedal, the TAC, I have a broken coil pack and I'm missing a connector for one of the O2 sensors. Once you add all that in it's not too far off from $2300. I would start off with an offer around $1800 and see where it goes.
I think he'll do 2k without the transfer case - I shouldn't need anything off of it right?
Nope. You will just need an adapter to your TC.
That's a gen 4 6.0 with really good heads. With trans package it probably came out of 2500 3/4 truck.
Atlas makes adapters for the 6l90.
Sent from my SM-N960U using Tapatalk
-
Good deal or no deal?
2011 6.0 w/ ~127k, harness, ecm, all accessories, and a 6l90 + tcase (not that I need it)
$2,300
(https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/p720x720/88932335_10218925563561685_431023113732358144_o.jpg?_nc_cat=108&_nc_sid=3b2858&_nc_ohc=KgJk3dJZ-ScAX-hl6-2&_nc_ht=scontent-atl3-1.xx&_nc_tp=6&oh=97a08174e8f5276799b2df379fd41b2c&oe=5E91B70E)
Terrible deal...send link to me though.
Sent from my SM-G960U using Tapatalk
@Trailabite - what did you just pay for your engine/tranny?
This is not a bad deal. I paid $1800 for what I have. But, I'm also missing the DBW gas pedal, the TAC, I have a broken coil pack and I'm missing a connector for one of the O2 sensors. Once you add all that in it's not too far off from $2300. I would start off with an offer around $1800 and see where it goes.
I think he'll do 2k without the transfer case - I shouldn't need anything off of it right?
Nope. You will just need an adapter to your TC.
That's a gen 4 6.0 with really good heads. With trans package it probably came out of 2500 3/4 truck.
Atlas makes adapters for the 6l90.
Sent from my SM-N960U using Tapatalk
It’s from the Duraburb guy
-
Good deal or no deal?
2011 6.0 w/ ~127k, harness, ecm, all accessories, and a 6l90 + tcase (not that I need it)
$2,300
(https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/p720x720/88932335_10218925563561685_431023113732358144_o.jpg?_nc_cat=108&_nc_sid=3b2858&_nc_ohc=KgJk3dJZ-ScAX-hl6-2&_nc_ht=scontent-atl3-1.xx&_nc_tp=6&oh=97a08174e8f5276799b2df379fd41b2c&oe=5E91B70E)
Terrible deal...send link to me though.
Sent from my SM-G960U using Tapatalk
@Trailabite - what did you just pay for your engine/tranny?
This is not a bad deal. I paid $1800 for what I have. But, I'm also missing the DBW gas pedal, the TAC, I have a broken coil pack and I'm missing a connector for one of the O2 sensors. Once you add all that in it's not too far off from $2300. I would start off with an offer around $1800 and see where it goes.
I think he'll do 2k without the transfer case - I shouldn't need anything off of it right?
Nope. You will just need an adapter to your TC.
That's a gen 4 6.0 with really good heads. With trans package it probably came out of 2500 3/4 truck.
Atlas makes adapters for the 6l90.
Sent from my SM-N960U using Tapatalk
It’s from the Duraburb guy
I go for it. Think it's the same year 6.0 I got for my tj. BTR cam will wake it up.
Sent from my SM-N960U using Tapatalk
-
Good deal or no deal?
2011 6.0 w/ ~127k, harness, ecm, all accessories, and a 6l90 + tcase (not that I need it)
$2,300
(https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/p720x720/88932335_10218925563561685_431023113732358144_o.jpg?_nc_cat=108&_nc_sid=3b2858&_nc_ohc=KgJk3dJZ-ScAX-hl6-2&_nc_ht=scontent-atl3-1.xx&_nc_tp=6&oh=97a08174e8f5276799b2df379fd41b2c&oe=5E91B70E)
Terrible deal...send link to me though.
Sent from my SM-G960U using Tapatalk
@Trailabite - what did you just pay for your engine/tranny?
This is not a bad deal. I paid $1800 for what I have. But, I'm also missing the DBW gas pedal, the TAC, I have a broken coil pack and I'm missing a connector for one of the O2 sensors. Once you add all that in it's not too far off from $2300. I would start off with an offer around $1800 and see where it goes.
I think he'll do 2k without the transfer case - I shouldn't need anything off of it right?
Nope. You will just need an adapter to your TC.
That's a gen 4 6.0 with really good heads. With trans package it probably came out of 2500 3/4 truck.
Atlas makes adapters for the 6l90.
Sent from my SM-N960U using Tapatalk
It came out of a 2500 Suburban
-
@TravisMac
Did you buy this? I seen that at sold.
Sent from my SM-G975U using Tapatalk
-
@TravisMac
Did you buy this? I seen that at sold.
Sent from my SM-G975U using Tapatalk
Yeah picking it up Monday
-
@TravisMac
Did you buy this? I seen that at sold.
Sent from my SM-G975U using Tapatalk
Yeah picking it up Monday
Awesome
Sent from my SM-G975U using Tapatalk
-
@TravisMac
Did you buy this? I seen that at sold.
Sent from my SM-G975U using Tapatalk
Yeah picking it up Monday
Woohoo! More V8s than 6 cylinders these days.
Sent from my SM-G960U using Tapatalk
-
@TravisMac
Did you buy this? I seen that at sold.
Sent from my SM-G975U using Tapatalk
Yeah picking it up Monday
Woohoo! More V8s than 6 cylinders these days.
Sent from my SM-G960U using Tapatalk
With my overheating and trans problems, I think it makes more sense to do this than keep throwing money at a garbage transmission. It’s already been rebuilt once and still gives me issues. This new combo likely won’t go in for a while though
-
@TravisMac
Did you buy this? I seen that at sold.
Sent from my SM-G975U using Tapatalk
Yeah picking it up Monday
Woohoo! More V8s than 6 cylinders these days.
Sent from my SM-G960U using Tapatalk
With my overheating and trans problems, I think it makes more sense to do this than keep throwing money at a garbage transmission. It’s already been rebuilt once and still gives me issues. This new combo likely won’t go in for a while though
Get everything lined up and we swap it out over a weekend. Maybe 2 weekends.
Sent from my SM-G975U using Tapatalk
-
@TravisMac
Did you buy this? I seen that at sold.
Sent from my SM-G975U using Tapatalk
Yeah picking it up Monday
Woohoo! More V8s than 6 cylinders these days.
Sent from my SM-G960U using Tapatalk
With my overheating and trans problems, I think it makes more sense to do this than keep throwing money at a garbage transmission. It’s already been rebuilt once and still gives me issues. This new combo likely won’t go in for a while though
Get everything lined up and we swap it out over a weekend. Maybe 2 weekends.
Sent from my SM-G975U using Tapatalk
Don’t make promises you can’t keep! [boohoo]
-
@TravisMac
Did you buy this? I seen that at sold.
Sent from my SM-G975U using Tapatalk
Yeah picking it up Monday
Woohoo! More V8s than 6 cylinders these days.
Sent from my SM-G960U using Tapatalk
With my overheating and trans problems, I think it makes more sense to do this than keep throwing money at a garbage transmission. It’s already been rebuilt once and still gives me issues. This new combo likely won’t go in for a while though
Get everything lined up and we swap it out over a weekend. Maybe 2 weekends.
Sent from my SM-G975U using Tapatalk
Don’t make promises you can’t keep! [boohoo]
Just say when! Engine swap is no problem. Shifters, drive shafts and ECM is what takes time.
Sent from my SM-G975U using Tapatalk
-
@TravisMac
Did you buy this? I seen that at sold.
Sent from my SM-G975U using Tapatalk
Yeah picking it up Monday
Nice!! Just enough time for not CFR....
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20200316/4f6637ebc7019aa3b987b135c33236b0.jpg)
Saw this on the book of faces today. Not sure if it’s a good deal or not.
Sent from my iPhone using Tapatalk
-
about the only thing unappealing about that sweet set of axle beef is the location, @Chris36l . nice find
-
about the only thing unappealing about that sweet set of axle beef is the location, @Chris36l . nice find
Naw, Chris likes roadtrips.
-
https://www.facebook.com/marketplace/item/223585548771042/
-
https://www.facebook.com/marketplace/item/223585548771042/
I’ve never seen a knuckle like that on the 05+ stuff. Interesting...
Sent from my iPad using Tapatalk Pro
-
https://www.facebook.com/marketplace/item/223585548771042/
I’ve never seen a knuckle like that on the 05+ stuff. Interesting...
Sent from my iPad using Tapatalk Pro
I wonder if it's an 04 or older?
-
https://www.facebook.com/marketplace/item/223585548771042/
I’ve never seen a knuckle like that on the 05+ stuff. Interesting...
Sent from my iPad using Tapatalk Pro
I wonder if it's an 04 or older?
I don’t think so. It still has the coil mount casting on the inner c.
Sent from my iPad using Tapatalk Pro
-
https://www.facebook.com/marketplace/item/223585548771042/
I’ve never seen a knuckle like that on the 05+ stuff. Interesting...
Sent from my iPad using Tapatalk Pro
I wonder if it's an 04 or older?
Theres a close up of the high steer arm on the fb link... looks like a damn pitman arm welded on with a vertical brace lol
-
https://www.facebook.com/marketplace/item/223585548771042/
I’ve never seen a knuckle like that on the 05+ stuff. Interesting...
Sent from my iPad using Tapatalk Pro
I wonder if it's an 04 or older?
Theres a close up of the high steer arm on the fb link... looks like a damn pitman arm welded on with a vertical brace lol
somebodies odd formula for ackerman adjustment or getting linkages parallel to mitigate bumpsteer,maybe? That's funky but correctable and price aint bad
-
I was looking at crap I don't really need ystrdy on Amazon.
I noticed this product & thought it worth sharing.
I run extended breathers up to cowl , but have considered the ARB diff breather thing before ; it's just kinda overpriced ,in my opinion.
Now, it appears there is a knockoff , Chinese ,same solution minus the brand , available for a slightly reasonable price, compared to the ARB.
no-name axle differential breather kit https://www.amazon.com/dp/B07V3C77HY/ref=cm_sw_r_sms_apa_i_zVDFEbH6QJ9WB (https://www.amazon.com/dp/B07V3C77HY/ref=cm_sw_r_sms_apa_i_zVDFEbH6QJ9WB)
(https://i.imgur.com/FkDYLVj.png)
ARBs
(https://i.imgur.com/zFiM8UF.png)
-
I was looking at crap I don't really need ystrdy on Amazon.
I noticed this product & thought it worth sharing.
I run extended breathers up to cowl , but have considered the ARB diff breather thing before ; it's just kinda overpriced ,in my opinion.
Now, it appears there is a knockoff , Chinese ,same solution minus the brand , available for a slightly reasonable price, compared to the ARB.
no-name axle differential breather kit https://www.amazon.com/dp/B07V3C77HY/ref=cm_sw_r_sms_apa_i_zVDFEbH6QJ9WB (https://www.amazon.com/dp/B07V3C77HY/ref=cm_sw_r_sms_apa_i_zVDFEbH6QJ9WB)
(https://i.imgur.com/FkDYLVj.png)
ARBs
(https://i.imgur.com/zFiM8UF.png)
Awesome. I run the ARB diff breather kit and it's been great.
-
I was looking at crap I don't really need ystrdy on Amazon.
I noticed this product & thought it worth sharing.
I run extended breathers up to cowl , but have considered the ARB diff breather thing before ; it's just kinda overpriced ,in my opinion.
Now, it appears there is a knockoff , Chinese ,same solution minus the brand , available for a slightly reasonable price, compared to the ARB.
Same part number and all. lmao
-
No reason to be supporting China!
-
No reason to be supporting China!
Economics drives some decisions
Sent from my SM-G960U using Tapatalk
-
No reason to be supporting China!
Economics drives some decisions
Sent from my SM-G960U using Tapatalk
To each there own!
Sent from my SM-G975U using Tapatalk
-
Could be made in the same plant.
Like the Snap Off & Hazard Frought Daytona jacks.
-
Could be made in the same plant.
Like the Snap Off & Hazard Frought Daytona jacks.
I'm thinking this ; there are leftover , non-branded batches & the repurchaser is selling cut-rate ...or, it could be blatant IP theft , though I don't know if ARB has it on a breather-tube manifold...
one is cheaper is what I care about ; it's all made in China.
-
Could be made in the same plant.
Like the Snap Off & Hazard Frought Daytona jacks.
I'm thinking this ; there are leftover , non-branded batches & the repurchaser is selling cut-rate ...or, it could be blatant IP theft , though I don't know if ARB has it on a breather-tube manifold...
one is cheaper is what I care about ; it's all made in China.
Could be imperfections in manufacturing.
We call them seconds.
-
Could be made in the same plant.
Like the Snap Off & Hazard Frought Daytona jacks.
I'm thinking this ; there are leftover , non-branded batches & the repurchaser is selling cut-rate ...or, it could be blatant IP theft , though I don't know if ARB has it on a breather-tube manifold...
one is cheaper is what I care about ; it's all made in China.
Could be imperfections in manufacturing.
We call them seconds.
this was the manufacturing terminology I could not summon via recollection , thank you ,Dave.
sloppy 2nds .
-
(https://uploads.tapatalk-cdn.com/20200403/481ecc75e40d920530320fab38d2e861.png)
Sent from my iPhone using Tapatalk
-
For the diesel pickup guys.... good deal on Valvoline Premium Blue.
$16 / gallon if you buy three (which you need anyway) through the end of the month.
https://www.napaonline.com/en/p/VAA773780
-
@j3ff3ry_j33p
Needs a little love. V8 and tons.
https://www.facebook.com/groups/948428678525475/permalink/3431445840223734/?sale_post_id=3431445840223734
Sent from my SM-G975U using Tapatalk
(https://uploads.tapatalk-cdn.com/20200619/d9bc0206c8987f4cb69448a2a35b2f6d.jpg)
-
https://www.facebook.com/marketplace/item/3005880952792670/
-
https://www.facebook.com/marketplace/item/3005880952792670/
Little bit of rust but still a great deal!
-
A little bit of rust is always too much.
My red XJ was a '89. I rode it hard & it was put away unwashed the entire time I owned it.
Zero rust. Even with hacked up fenders.
-
A little bit of rust is always too much.
My red XJ was a '89. I rode it hard & it was put away unwashed the entire time I owned it.
Zero rust. Even with hacked up fenders.
I don’t believe that for a second
Sent from my iPhone using Tapatalk
-
https://www.facebook.com/marketplace/item/3005880952792670/
Little bit of rust but still a great deal!
Doesn’t look too bad - should be able to clean it up pretty easily. Most people would probably replace the fenders anyway.
Rust free that would be listed for 15k
Sent from my iPhone using Tapatalk
-
A little bit of rust is always too much.
My red XJ was a '89. I rode it hard & it was put away unwashed the entire time I owned it.
Zero rust. Even with hacked up fenders.
I don’t believe that for a second
Sent from my iPhone using Tapatalk
What part?
-
A little bit of rust is always too much.
My red XJ was a '89. I rode it hard & it was put away unwashed the entire time I owned it.
Zero rust. Even with hacked up fenders.
I don’t believe that for a second
Sent from my iPhone using Tapatalk
What part?
I mean maybe they do a better job rust proofing the mini van style uni-bodies, but a TJ it’s rare to not find a little somethin somethin at the frame horns and the skid plate mount
-
A little bit of rust is always too much.
My red XJ was a '89. I rode it hard & it was put away unwashed the entire time I owned it.
Zero rust. Even with hacked up fenders.
I don’t believe that for a second
Sent from my iPhone using Tapatalk
What part?
I mean maybe they do a better job rust proofing the mini van style uni-bodies, but a TJ it’s rare to not find a little somethin somethin at the frame horns and the skid plate mount
What's a frame?
-
@Jeeptrk LJ hardtop for 350 in TN
https://www.facebook.com/marketplace/item/200238751222657/
-
I remember @tcdawg asking a year or two ago about these jump batteries and figured it worth posting for anybody still looking for a solid boost/charger/jump for 12v.
I use the gb70 model &:it's been worth every penny after 3 years.
I can jump the Jeep JK, xj and the ram hemi , all consecutively , 40-50 times on a charge .
KK & I charge our phones , tablets, the Rugged handset radio, in our tent w/ it as we sleep when on GATR overnight rides. Next morn, just let it charge while we trailride the next day via USB.
This was on Amazon this morning for the gb40 NOCO . Its a good deal for a $100, thru noon today, if you're looking for backup 12v power:
https://www.amazon.com/dp/B015TKUPIC/ref=cm_sw_r_sms_apa_i_WCD8EbZKG6WA3
-NOCO Boost Plus GB40 1000 Amp 12-Volt Ultra Safe Portable Lithium Car Battery Jump Starter Pack For Up To 6-Liter Gasoline And 3-Liter Diesel Engines
-
This probably won't last long!
https://www.facebook.com/groups/crawlerfleamarket/permalink/2558740077769438/?sale_post_id=2558740077769438
Sent from my SM-G975U using Tapatalk
-
This probably won't last long!
https://www.facebook.com/groups/crawlerfleamarket/permalink/2558740077769438/?sale_post_id=2558740077769438
Sent from my SM-G975U using Tapatalk
T-case is a ticking timebomb. Wont last long if you put the 5.3 to use.
Sent from my SM-N960U using Tapatalk
-
Really wish I had a 3/4 ton...
https://www.facebook.com/marketplace/item/600649570836707/
-
Damn good deal.
-
Really wish I had a 3/4 ton...
https://www.facebook.com/marketplace/item/600649570836707/
If it makes you feel better about not picking that up, you probably would be overweight with 3/4 ton. Looks like you would need a 1 ton to have enough Payload capacity to take the pin weight plus people/cargo etc.
-
Really wish I had a 3/4 ton...
https://www.facebook.com/marketplace/item/600649570836707/
If it makes you feel better about not picking that up, you probably would be overweight with 3/4 ton. Looks like you would need a 1 ton to have enough Payload capacity to take the pin weight plus people/cargo etc.
Something isn't right about that information. They can haul greater than 3k lbs and pull greater than 18k lbs.
https://www.ramtrucks.com/compare/detailed-chart.ram_2500.2019.html?modelYearCode=CUT201914&variation=1,1
https://www.ford.com/trucks/super-duty/models/f250-lariat/
Sent from my SM-G960U using Tapatalk
-
Really wish I had a 3/4 ton...
https://www.facebook.com/marketplace/item/600649570836707/
If it makes you feel better about not picking that up, you probably would be overweight with 3/4 ton. Looks like you would need a 1 ton to have enough Payload capacity to take the pin weight plus people/cargo etc.
You would just adjust the placement of the Jeep on the back to balance the pin weight, no?
-
@clark123456 your right, not sure why Ram’s site would list those numbers. Elsewhere I see the GVWR is 10,000, so there’s no way the vehicle weight is 8,100 leaving that roughly 1,900 payload it was showing. Wonder what the rear axle weight rating is. Should be around 6K on a SRW.
-
Really wish I had a 3/4 ton...
https://www.facebook.com/marketplace/item/600649570836707/
If it makes you feel better about not picking that up, you probably would be overweight with 3/4 ton. Looks like you would need a 1 ton to have enough Payload capacity to take the pin weight plus people/cargo etc.
You would just adjust the placement of the Jeep on the back to balance the pin weight, no?
Yes but would have to keep it in the safe range and not go too light on the tongue weight. If that trailer was 10k, you would be looking at 1,200-1,500 lbs on the ball. So subtract that from the rear axle rating and the GVWR of the truck.
Correction- looks like 15% is the low end for pin weight on a GN. So your looking at 1,500 and up.
-
@clark123456 your right, not sure why Ram’s site would list those numbers. Elsewhere I see the GVWR is 10,000, so there’s no way the vehicle weight is 8,100 leaving that roughly 1,900 payload it was showing. Wonder what the rear axle weight rating is. Should be around 6K on a SRW.
Yeah, no problem. I was just wanting to ensure we keep crushing @TravisMac 's dreams. :)
-
@clark123456 your right, not sure why Ram’s site would list those numbers. Elsewhere I see the GVWR is 10,000, so there’s no way the vehicle weight is 8,100 leaving that roughly 1,900 payload it was showing. Wonder what the rear axle weight rating is. Should be around 6K on a SRW.
Yeah, no problem. I was just wanting to ensure we keep crushing @TravisMac 's dreams. :)
(https://media2.giphy.com/media/7LDNLMkRGAFeo/giphy.gif)
Sent from my iPhone using Tapatalk
-
@clark123456 your right, not sure why Ram’s site would list those numbers. Elsewhere I see the GVWR is 10,000, so there’s no way the vehicle weight is 8,100 leaving that roughly 1,900 payload it was showing. Wonder what the rear axle weight rating is. Should be around 6K on a SRW.
Yeah, no problem. I was just wanting to ensure we keep crushing @TravisMac 's dreams. :)
(https://media2.giphy.com/media/7LDNLMkRGAFeo/giphy.gif)
Sent from my iPhone using Tapatalk
Noose = Racist...shame shame
Sent from my SM-G960U using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20200716/eab7bb53982cd0591189c2fb6cb7e036.png)
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20200716/eab7bb53982cd0591189c2fb6cb7e036.png)
Sent from my iPhone using Tapatalk
Seems reasonable,especially since it’s including the transmission. but I don’t know if it’s a good deal or not.
I do know that’s a badass motor
-
(https://uploads.tapatalk-cdn.com/20200924/cb04ee07bb98600fcf801379fa3673e5.jpg)
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20200924/cb04ee07bb98600fcf801379fa3673e5.jpg)
Sent from my iPhone using Tapatalk
Was just about to post this
Sent from my SM-N960U using Tapatalk
-
They are also running a similar deal on their sawzall.
-
I got mine at Pendergrass Flea Market. It was $140 but came with the smaller 2.0 amp battery.
No biggie since I have 2 of the 5.0 batteries.
-
They are also running a similar deal on their sawzall.
The sawzalls are fantastic/ have a large and small and use them for normal use as well as they're great at trail clearing. Any brush/trees ~5" or less can be cut down with them without a bulky chainsaw.
-
(https://uploads.tapatalk-cdn.com/20201203/77e67f5d15008bc7b7a143e273366b1e.png)
(https://uploads.tapatalk-cdn.com/20201203/90e7330ade0bfd09e1c7a8072efca2cf.png)
-
That deal seems way too good to be true...
-
@j3ff3ry_j33p - thats a smokin deal just for the parts alone
-
@j3ff3ry_j33p - thats a smokin deal just for the parts alone
That's what I was thinking. Parts donor for the LJ...
-
@j3ff3ry_j33p - thats a smokin deal just for the parts alone
That's what I was thinking. Parts donor for the LJ...
You better message them now lol
-
@j3ff3ry_j33p - thats a smokin deal just for the parts alone
That's what I was thinking. Parts donor for the LJ...
You better message them now lol
I talked to her
she has likely buyer on the way as I mssged her,lol
4 others w cash in hand if the current backs out.
She inquired about East of Mississippi River wheeling . She said she plans to come out here to Tennessee next year & wondered if folks wheel out here.
of course I told her to come on one of our Open rides .
thanks guys for the lead.
I also think this is pretty good : https://www.facebook.com/groups/208454209324301/permalink/1654139291422445/?sale_post_id=1654139291422445
TBH, I don't get excited when I see rigs really far away in AZ or Utah, at least right now.
so y'all don't think I'm crazy or lazy , once again my Jeep priorities have been tossed in the backseat I so wanna lose.
I got this new job 1 year ago. Due to Covid impacting customers, I was moved from salaried to contract = all that hard saved Jeep $ is helping to accentuate what I am bringing in + wife's salary. Gotta support the fam. I'm back on job hunt & ( between you and me) have never been so pissed & frustrated about the thing I love doing most.
I simy can't do normal Jeep stuff like y'all til I ,once again , revamp my capital flow.
-
I also think this is pretty good : https://www.facebook.com/groups/208454209324301/permalink/1654139291422445/?sale_post_id=1654139291422445
40k for an LJ with a stock engine? Pass
-
I also think this is pretty good : https://www.facebook.com/groups/208454209324301/permalink/1654139291422445/?sale_post_id=1654139291422445
40k for an LJ with a stock engine? Pass
hard pass
-
I also think this is pretty good : https://www.facebook.com/groups/208454209324301/permalink/1654139291422445/?sale_post_id=1654139291422445
40k for an LJ with a stock engine? Pass
hard pass
fcknA I HATE facebook when they create attn by subtitle-ing ads w/ "12345" .
I swear I thought they wanted 12,345 dollars for it .
hard pass for my dumb ass ,indeed
(https://i.imgur.com/1PFfCF0.png)
-
this is average price these days for what I still feel should be around $4grand if the rust is as prevalent as it usually/looks is under the por15 they've smothered it in to hide.
This 4banger would be good for a vortec or ls but I dunno about 8500 for it. Too much work for me , I'm just always floored by what's being asked for jeeps these days
https://www.facebook.com/groups/jeepfleamarket/permalink/3474451139320891/?sale_post_id=3474451139320891
-
42 Irok stickies. Been a few years since they did an IROK production run of stickies I think.
https://www.hardlinecrawlers.com/threads/42x14r17-irok-stickies.62496/
@Raisinhead
@8lugLJ
-
42 Irok stickies. Been a few years since they did an IROK production run of stickies I think.
https://www.hardlinecrawlers.com/threads/42x14r17-irok-stickies.62496/
@Raisinhead
@8lugLJ
his description including the words dry rot concerned me lol
-
https://www.ebay.com/itm/RCV-WJ-Dana-30-Axle-Shafts-27-Spline-CVJ30-WJ-OPEN-99-04-Jeep-Grand-Cherokee/124454741463?hash=item1cfa14a5d7:g:paYAAOSwVztfvET3
https://www.rcvperformance.com/ultimate-dana-30-cv-axle-set-for-jeep-wrangler-yj-tj-lj-xj-zj.html
Not sure if the warranty is transferable or all that but someone might could make a low ball offer on these and get them on the cheap.
-
https://www.ebay.com/itm/RCV-WJ-Dana-30-Axle-Shafts-27-Spline-CVJ30-WJ-OPEN-99-04-Jeep-Grand-Cherokee/124454741463?hash=item1cfa14a5d7:g:paYAAOSwVztfvET3
https://www.rcvperformance.com/ultimate-dana-30-cv-axle-set-for-jeep-wrangler-yj-tj-lj-xj-zj.html
Not sure if the warranty is transferable or all that but someone might could make a low ball offer on these and get them on the cheap.
They don’t transfer. I checked when looking at a set for my Dana 60
-
link from the past day which is for JK & TJ parts someone that's upgrading his Wranglers & posted on another Jeep forum that I visit occasionally.
https://www.jkowners.com/threads/jeep-jk-tj-parts-for-sale.387933/
-
Decent price for a pair of 1 tin axles
https://www.facebook.com/groups/crawlerfleamarket/permalink/2774959002814210/?sale_post_id=2774959002814210
Sent from my SM-G975U using Tapatalk
(https://uploads.tapatalk-cdn.com/20210220/85de8d6d3b810d7c9a3f22b52b2cff16.jpg)
-
https://www.facebook.com/marketplace/item/275200660677079/
(https://uploads.tapatalk-cdn.com/20210304/2b62ee007487355b0e516ce9a613b858.jpg)
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20210323/af18405f31848a3dd497d699b1b2e0a5.jpg)
Sent from my SM-G986U using Tapatalk
-
@j3ff3ry_j33p
(https://uploads.tapatalk-cdn.com/20210323/af18405f31848a3dd497d699b1b2e0a5.jpg)
Sent from my SM-G986U using Tapatalk
-
@j3ff3ry_j33p
(https://uploads.tapatalk-cdn.com/20210323/af18405f31848a3dd497d699b1b2e0a5.jpg)
Sent from my SM-G986U using Tapatalk
I like this very much.
I'm about 3 months away ....
fwiw, I've been low-key this past halfyear because job I was in sucked. I( literally) just got another job & should - finslly- have financial means of getting my Jeep situation addressed. (+also have the time to sell the 4door properly.)
-
(https://uploads.tapatalk-cdn.com/20210522/caef336ce7f5f9b62336bff22ef7d447.jpg)
-
(https://uploads.tapatalk-cdn.com/20210522/caef336ce7f5f9b62336bff22ef7d447.jpg)
Shoot, that thing will be gone in all of five minutes at over ask. Hardtop, tcase, and wheels/tires are worth over half the cost
-
https://www.homedepot.com/p/Husky-Mechanics-Tool-Set-270-Piece-H270MTS/309161789
Great deal if anyone needs it
-
I have one of those. They have them set out with all the Christmas gifts every year and the wife got me one last year. I put it all in a tool toll to just toss in the Jeep, tried keeping everything in the case the first trip out and had sockets all over.
Sent from my iPhone using Tapatalk
-
https://www.homedepot.com/p/Husky-Mechanics-Tool-Set-270-Piece-H270MTS/309161789
Great deal if anyone needs it
I love that Husky pointed out that 101 of the tools are use less(https://uploads.tapatalk-cdn.com/20211105/9217f1b8ee437ab1cd339a707c399ea1.jpg)
Sent from my SM-G970U using Tapatalk
-
https://www.homedepot.com/p/Husky-Mechanics-Tool-Set-270-Piece-H270MTS/309161789
Great deal if anyone needs it
I love that Husky pointed out that 101 of the tools are use less
Sent from my SM-G970U using Tapatalk
The most valuable tool is the one you need but don't have
-
https://www.facebook.com/groups/1733289403585274/permalink/3101916600055874/?sale_post_id=3101916600055874
@j3ff3ry_j33p
-
https://www.facebook.com/groups/1733289403585274/permalink/3101916600055874/?sale_post_id=3101916600055874
@j3ff3ry_j33p
Nice jeep!
-
Seems too good to be true, but…
(https://uploads.tapatalk-cdn.com/20220111/b4ee3e94570ebc0cdd30b034dd0fefa2.jpg)
-
Seems too good to be true, but…
(https://uploads.tapatalk-cdn.com/20220111/b4ee3e94570ebc0cdd30b034dd0fefa2.jpg)
There really is no worse ROI than a good Jeep build lmao
-
Seems too good to be true, but…
(https://uploads.tapatalk-cdn.com/20220111/b4ee3e94570ebc0cdd30b034dd0fefa2.jpg)
this is perfect timing.
As 2022 comes into being , I am fortunate to find myself ( finally) settled-TF-back-down financially and in an employment position that I have "let stew" for , now, a half-a year. That was so-as to NOT have what occurred to me last year ( where the new job* employer flaked-out / the gig backfired on me and I found myself ALL OVER again unable to financially have the time nor resources to deal with the effort of selling OR ( preferably) trading for a rig like this one Jay has posted and trailer plus cash ( +/-) ....
I was just talking briefly with Jimbo last week ; he tells me that , contrary to the past used Jeep market , used JK/JKUs that are modded heavily are kinda commanding higher prices due to it being hard to get Jeeps ATM. I should probably move on something like this soon if that is the case; I literally just am able to say I am back on my feet.
It took me this long to get the job back under MY belt and the dent I made in our money /savings re-stabilized, etc...it sucked not being able to Jeep at all last year.I had to get back into a work situation that allows the time and $ for Jeeping so, just been working my ass off , saving money and not even looking at Jeeps for 14 months.
-
You can apply for a title through the state of Vermont. I got a title for an S10 from Vermont and transferred it to Georgia last year. The cost was $200. You and the seller sign some paperwork and you send the paperwork off and some money and boom you are done.
-
Seems too good to be true, but…
(https://uploads.tapatalk-cdn.com/20220111/b4ee3e94570ebc0cdd30b034dd0fefa2.jpg)
this is perfect timing.
As 2022 comes into being , I am fortunate to find myself ( finally) settled-TF-back-down financially and in an employment position that I have "let stew" for , now, a half-a year. That was so-as to NOT have what occurred to me last year ( where the new job* employer flaked-out / the gig backfired on me and I found myself ALL OVER again unable to financially have the time nor resources to deal with the effort of selling OR ( preferably) trading for a rig like this one Jay has posted and trailer plus cash ( +/-) ....
I was just talking briefly with Jimbo last week ; he tells me that , contrary to the past used Jeep market , used JK/JKUs that are modded heavily are kinda commanding higher prices due to it being hard to get Jeeps ATM. I should probably move on something like this soon if that is the case; I literally just am able to say I am back on my feet.
It took me this long to get the job back under MY belt and the dent I made in our money /savings re-stabilized, etc...it sucked not being able to Jeep at all last year.I had to get back into a work situation that allows the time and $ for Jeeping so, just been working my ass off , saving money and not even looking at Jeeps for 14 months.
Welcome back Jeffery! This seems like s good deal, but my guess is that it's a scam. If it's not, awesome. And who needs a title, get a bill of sale and treat it like a buggy lol.
-
Seems too good to be true, but…
(https://uploads.tapatalk-cdn.com/20220111/b4ee3e94570ebc0cdd30b034dd0fefa2.jpg)
this is perfect timing.
As 2022 comes into being , I am fortunate to find myself ( finally) settled-TF-back-down financially and in an employment position that I have "let stew" for , now, a half-a year. That was so-as to NOT have what occurred to me last year ( where the new job* employer flaked-out / the gig backfired on me and I found myself ALL OVER again unable to financially have the time nor resources to deal with the effort of selling OR ( preferably) trading for a rig like this one Jay has posted and trailer plus cash ( +/-) ....
I was just talking briefly with Jimbo last week ; he tells me that , contrary to the past used Jeep market , used JK/JKUs that are modded heavily are kinda commanding higher prices due to it being hard to get Jeeps ATM. I should probably move on something like this soon if that is the case; I literally just am able to say I am back on my feet.
It took me this long to get the job back under MY belt and the dent I made in our money /savings re-stabilized, etc...it sucked not being able to Jeep at all last year.I had to get back into a work situation that allows the time and $ for Jeeping so, just been working my ass off , saving money and not even looking at Jeeps for 14 months.
Welcome back Jeffery! This seems like s good deal, but my guess is that it's a scam. If it's not, awesome. And who needs a title, get a bill of sale and treat it like a buggy lol.
thanks , bud
yeah, that seems so "too good to be true".
I'm finding A LOT of those ( edit- shifty looking ads )online ...
-
You can apply for a title through the state of Vermont. I got a title for an S10 from Vermont and transferred it to Georgia last year. The cost was $200. You and the seller sign some paperwork and you send the paperwork off and some money and boom you are done.
titles can be reapplied for/ sometimes re-attained yep
-
You can apply for a title through the state of Vermont. I got a title for an S10 from Vermont and transferred it to Georgia last year. The cost was $200. You and the seller sign some paperwork and you send the paperwork off and some money and boom you are done.
titles can be reapplied for/ sometimes re-attained yep
I believe that whole idea depends on the title status right? Abondoned/salvage/rebuilt/etc
-
You can apply for a title through the state of Vermont. I got a title for an S10 from Vermont and transferred it to Georgia last year. The cost was $200. You and the seller sign some paperwork and you send the paperwork off and some money and boom you are done.
titles can be reapplied for/ sometimes re-attained yep
I believe that whole idea depends on the title status right? Abondoned/salvage/rebuilt/etc
i believe there are some state-dependent peculiarities around-some of the laws i seem to rcall reading occasionally about , but, yes; that is correct as far as I know
-
Rock Crawling Classifieds on fb(https://uploads.tapatalk-cdn.com/20220130/d72eb0c247726d82b1e53a4aef2e5419.jpg)
Sent from my SM-G986U using Tapatalk
-
https://www.facebook.com/marketplace/item/300988482141908/?ref=browse_tab&referral_code=marketplace_top_picks&referral_story_type=top_picks
-
https://www.facebook.com/marketplace/item/300988482141908/?ref=browse_tab&referral_code=marketplace_top_picks&referral_story_type=top_picks
Smoking deal
-
https://www.facebook.com/marketplace/item/300988482141908/?ref=browse_tab&referral_code=marketplace_top_picks&referral_story_type=top_picks
Smoking deal
that is A LOT of blue toob
-
https://www.facebook.com/marketplace/item/300988482141908/?ref=browse_tab&referral_code=marketplace_top_picks&referral_story_type=top_picks
Smoking deal
that is A LOT of blue toob
It’s giving me ptsd
-
https://www.facebook.com/groups/1733289403585274/permalink/3170736749840525/?sale_post_id=3170736749840525
-
https://www.facebook.com/groups/1733289403585274/permalink/3170736749840525/?sale_post_id=3170736749840525
Sold in 2 hours
-
Good deal
-
(https://uploads.tapatalk-cdn.com/20220522/5e51771c55dd099a3059dc109cf77bcf.jpg)
Sent from my SM-G986U using Tapatalk
-
Just came across this listing this morning. 44/9 both locked set up for a YJ. It’s FB though, so he’ll probably never respond or the description will be wrong.
https://www.facebook.com/marketplace/item/677790103452169/ (https://www.facebook.com/marketplace/item/677790103452169/)
(https://live.staticflickr.com/65535/52100684764_6b5e7562fe_h.jpg)
-
Just came across this listing this morning. 44/9 both locked set up for a YJ. It’s FB though, so he’ll probably never respond or the description will be wrong.
https://www.facebook.com/marketplace/item/677790103452169/ (https://www.facebook.com/marketplace/item/677790103452169/)
(https://live.staticflickr.com/65535/52100684764_6b5e7562fe_h.jpg)
Offer for him to deliver for free, and 90% off, and you'll decide for sure when you see them in person.
Sent from my SM-G970U using Tapatalk
-
Just came across this listing this morning. 44/9 both locked set up for a YJ. It’s FB though, so he’ll probably never respond or the description will be wrong.
https://www.facebook.com/marketplace/item/677790103452169/ (https://www.facebook.com/marketplace/item/677790103452169/)
(https://live.staticflickr.com/65535/52100684764_6b5e7562fe_h.jpg)
Offer for him to deliver for free, and 90% off, and you'll decide for sure when you see them in person.
Sent from my SM-G970U using Tapatalk
Personal experience with the seller?
-
Just came across this listing this morning. 44/9 both locked set up for a YJ. It’s FB though, so he’ll probably never respond or the description will be wrong.
https://www.facebook.com/marketplace/item/677790103452169/ (https://www.facebook.com/marketplace/item/677790103452169/)
(https://live.staticflickr.com/65535/52100684764_6b5e7562fe_h.jpg)
Offer for him to deliver for free, and 90% off, and you'll decide for sure when you see them in person.
Sent from my SM-G970U using Tapatalk
Personal experience with the seller?
No. Just playing along with what internet sellers be like
Sent from my SM-G970U using Tapatalk
-
Not bad considering the cost of new stickies
Sent from my SM-G986U using Tapatalk
-
I feel like the this thread should be called Marketplace Good Deals ;) Is CL still around
-
I feel like the this thread should be called Marketplace Good Deals ;) Is CL still around
CL still serves for the freak stuff; or so I've heard from @Raisinhead .
I agree, most stuff goes through fb mp these days. Same shady deals and ghosts on a different platform.
Sent from my SM-G970U using Tapatalk
-
I feel like the this thread should be called Marketplace Good Deals ;) Is CL still around
CL still serves for the freak stuff; or so I've heard from @Raisinhead .
I agree, most stuff goes through fb mp these days. Same shady deals and ghosts on a different platform.
Yeah, yeah @Raisinhead told you about it [pv]
-
A little old but, doesn't seem like a bad deal.
https://www.facebook.com/groups/crawlerfleamarket/permalink/3190696637907109/?sale_post_id=3190696637907109
-
This wouldn't be bad for someone just getting into the game.
https://www.facebook.com/groups/208454209324301/permalink/2183012715201764/?sale_post_id=2183012715201764
1987 one ton swaped big block 454 Chevy four speed sm465 trans np 205 twin stick case jeep yj on 42" tsl king pin Dana 60 front has a hydro steering using a stock gm pump and orbital with single end ram 14 bolt rear with disc brake swap 513 gears Detroit locker front and rear has brand new clutch in it but won't disengage and don't feel like pulling the trans back out just a woods jeep I do have a title was was signed by the previous owner .. again it's a woods jeep
Sent from my SM-S901U using Tapatalk
-
Anyone need a backseat for there TJ/LJ? This ones located at a upholstery shop and they said its new. The lady messaged me today and said she would take $200 for it. I don't have the time to go get it or It would be mine.
Snellville Auto Trim & Upholstery
2184 Scenic Hwy N Snellville GA 30078
https://atlanta.craigslist.org/eat/pts/d/snellville-corbeau-baja-seat/7564169415.html
-
good find on the seat
made me do a quick search, https://atlanta.craigslist.org/wat/cto/d/carrollton-2022-jeep-wrangler-rubicon/7555621231.html
does not seem like a bad deal, if you are in the market for a $70K wrangler
-
(https://uploads.tapatalk-cdn.com/20221206/61869f3e4485a784ec34bfada2ddcfab.jpg)
Sent from my SM-G986U using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20221206/61869f3e4485a784ec34bfada2ddcfab.jpg)
Sent from my SM-G986U using Tapatalk
From Mr barefoot racing himself!
Sent from my iPhone using Tapatalk Pro
-
I know a couple of people here that could either fix it or be the ideal test subject(https://uploads.tapatalk-cdn.com/20230201/11b8578cee4fcca83a1396b4560248aa.jpg)
Sent from my SM-G986U using Tapatalk
-
Don't know the guy or anything about the jeep, but might be a good way to save a few steps if someone here with a TJ wants a dedicated trail rig(https://uploads.tapatalk-cdn.com/20230307/11ea948d3609c4c15c25d4d8d4aa59c6.jpg)
Sent from my SM-G986U using Tapatalk
-
I talked to this guy last year about that jeep , iron small block Fi tech , 205 and some kinda of doubler , leafs on the front , don't think he has the stickies anymore . I do recall some kind of title issue .
-
I talked to this guy last year about that jeep , iron small block Fi tech , 205 and some kinda of doubler , leafs on the front , don't think he has the stickies anymore . I do recall some kind of title issue .
Front leafs
WNB
-
9000 watt $173
https://www.harborfreight.com/9000-watt-gas-powered-portable-generator-epa-63970.html?fbclid=IwAR3pvdWkJFbu9daVE-TxOx-l5E5BdzGyXb4Tuqw6QtvQ_xz1yEbZsTZ2RbM
3500 watt $190
https://www.harborfreight.com/3500-watt-super-quiet-inverter-generator-56720.html?fbclid=IwAR0ICdsGqwFclFfni8eyVvSwOYfAyE14nvXZQeTMAnVkSjyeLo1tQTjpbdM
2000 watt $115
https://www.harborfreight.com/2000-watt-super-quiet-inverter-generator-62523.html
-
9000 watt $173
https://www.harborfreight.com/9000-watt-gas-powered-portable-generator-epa-63970.html?fbclid=IwAR3pvdWkJFbu9daVE-TxOx-l5E5BdzGyXb4Tuqw6QtvQ_xz1yEbZsTZ2RbM
3500 watt $190
https://www.harborfreight.com/3500-watt-super-quiet-inverter-generator-56720.html?fbclid=IwAR0ICdsGqwFclFfni8eyVvSwOYfAyE14nvXZQeTMAnVkSjyeLo1tQTjpbdM
2000 watt $115
https://www.harborfreight.com/2000-watt-super-quiet-inverter-generator-62523.html
may have crashed their site lol I cant see em
-
9000 watt $173
https://www.harborfreight.com/9000-watt-gas-powered-portable-generator-epa-63970.html?fbclid=IwAR3pvdWkJFbu9daVE-TxOx-l5E5BdzGyXb4Tuqw6QtvQ_xz1yEbZsTZ2RbM
3500 watt $190
https://www.harborfreight.com/3500-watt-super-quiet-inverter-generator-56720.html?fbclid=IwAR0ICdsGqwFclFfni8eyVvSwOYfAyE14nvXZQeTMAnVkSjyeLo1tQTjpbdM
2000 watt $115
https://www.harborfreight.com/2000-watt-super-quiet-inverter-generator-62523.html
may have crashed their site lol I cant see em
Yea that's what I'm reading on all of the deal pages I follow...
-
9000 watt $173
https://www.harborfreight.com/9000-watt-gas-powered-portable-generator-epa-63970.html?fbclid=IwAR3pvdWkJFbu9daVE-TxOx-l5E5BdzGyXb4Tuqw6QtvQ_xz1yEbZsTZ2RbM
3500 watt $190
https://www.harborfreight.com/3500-watt-super-quiet-inverter-generator-56720.html?fbclid=IwAR0ICdsGqwFclFfni8eyVvSwOYfAyE14nvXZQeTMAnVkSjyeLo1tQTjpbdM
2000 watt $115
https://www.harborfreight.com/2000-watt-super-quiet-inverter-generator-62523.html
may have crashed their site lol I cant see em
Yea that's what I'm reading on all of the deal pages I follow...
I got to the site, but it doesn't let you add to cart. "Error 503" or something like that.
Right below the item it suggests the same item but at the real price haha
-
9000 watt $173
https://www.harborfreight.com/9000-watt-gas-powered-portable-generator-epa-63970.html?fbclid=IwAR3pvdWkJFbu9daVE-TxOx-l5E5BdzGyXb4Tuqw6QtvQ_xz1yEbZsTZ2RbM
3500 watt $190
https://www.harborfreight.com/3500-watt-super-quiet-inverter-generator-56720.html?fbclid=IwAR0ICdsGqwFclFfni8eyVvSwOYfAyE14nvXZQeTMAnVkSjyeLo1tQTjpbdM
2000 watt $115
https://www.harborfreight.com/2000-watt-super-quiet-inverter-generator-62523.html
may have crashed their site lol I cant see em
Yea that's what I'm reading on all of the deal pages I follow...
I got to the site, but it doesn't let you add to cart. "Error 503" or something like that.
Right below the item it suggests the same item but at the real price haha
same here
-
Fair deal on a PJ buggy hauler.
(https://uploads.tapatalk-cdn.com/20230413/250c158542b9f4ef951d6f04528e445e.jpg)
-
Fair deal on a PJ buggy hauler.
(https://uploads.tapatalk-cdn.com/20230413/250c158542b9f4ef951d6f04528e445e.jpg)
Fairs relative I guess
-
Fair deal on a PJ buggy hauler.
(https://uploads.tapatalk-cdn.com/20230413/250c158542b9f4ef951d6f04528e445e.jpg)
Fairs relative I guess
It’s a fair deal in todays dollars.
But damn. I know some of you bought that same trailer 3 years ago for almost half that
-
That’s 7k axles. A bunch of us are running 5200#
-
Trailer alone is almost worth that(https://uploads.tapatalk-cdn.com/20230622/d0d18f59709a3513d0c7341156fc9d3a.jpg)
Sent from my SM-G986U using Tapatalk
-
Sorry, I missed the price.
????!
Cause my bastard XJ couldn’t fetch shit.
-
Sorry, I missed the price.
????!
Cause my bastard XJ couldn’t fetch shit.
4,500. bottom of the screen shot
-
Thanks for pointing that out. I’m still getting use to the whole reading thing. Lol
-
Thanks for pointing that out. I’m still getting use to the whole reading thing. Lol
If you've made it this far, I'd quit while you're ahead
-
My girl told me about Temu.com.
Tons of cheap items, everything under the sun.
Free shipping & returns. Check ‘em out.
I got $75 dollars worth of junk that would have been at least double that if bought local.
-
My girl told me about Temu.com.
Tons of cheap items, everything under the sun.
Free shipping & returns. Check ‘em out.
I got $75 dollars worth of junk that would have been at least double that if bought local.
Has it actually arrived? Lots of people burned by the too good to be true websites
-
Yes. She ordered some baby clothes & her friend has ordered things off the site & were satisfied with the items.
-
Didnt see a 4th of july sale, but 10% off at Barnes4wd with code "bleepinjeep"
-
Didnt see a 4th of july sale, but 10% off at Barnes4wd with code "bleepinjeep"
Get some heims, I can hear yours squawking from here.
-
Didnt see a 4th of july sale, but 10% off at Barnes4wd with code "bleepinjeep"
Get some heims, I can hear yours squawking from here.
I did, 3 piece cromoly to replace all the front uppers
-
https://www.facebook.com/groups/1733289403585274/permalink/3522724641308399/?sale_post_id=3522724641308399&mibextid=W9rl1R (https://www.facebook.com/groups/1733289403585274/permalink/3522724641308399/?sale_post_id=3522724641308399&mibextid=W9rl1R)
Anyone need 49s? $2k for a new set.
Sent from my iPhone using Tapatalk
-
My girl told me about Temu.com.
Tons of cheap items, everything under the sun.
Free shipping & returns. Check ‘em out.
I got $75 dollars worth of junk that would have been at least double that if bought local.
Has it actually arrived? Lots of people burned by the too good to be true websites
Got all my crap on the mail & everything seems solid.
I’d buy again.
-
https://justdifferentials.com/dana-spicer-1350-u-joint-strongest-1350-available-old-5-447x.html
If you need 1350 u-joints for what ever reason, that price is good enough to just make art of them.
I ordered 4. Probably gonna wish I ordered more.
-
Thanks alot. I just ordered 10.
-
https://justdifferentials.com/dana-spicer-1350-u-joint-strongest-1350-available-old-5-447x.html
If you need 1350 u-joints for what ever reason, that price is good enough to just make art of them.
I ordered 4. Probably gonna wish I ordered more.
Thanks! Just ordered a few.
-
https://justdifferentials.com/jeep-wrangler-jk-jl-nitro-chromoly-excalibur-heavy-duty-u-joint.html
JK & JL Folks!
-
Good deal. Got a few 1410 spares for a driveshaft I don't even have yet lol
-
https://justdifferentials.com/dana-spicer-1350-u-joint-strongest-1350-available-old-5-447x.html
If you need 1350 u-joints for what ever reason, that price is good enough to just make art of them.
I ordered 4. Probably gonna wish I ordered more.
Thanks alot. I just ordered 10.
https://justdifferentials.com/dana-spicer-1350-u-joint-strongest-1350-available-old-5-447x.html
If you need 1350 u-joints for what ever reason, that price is good enough to just make art of them.
I ordered 4. Probably gonna wish I ordered more.
Thanks! Just ordered a few.
Bad new guys. Contacted my sales guy over there with that part number, and asked stock qty. Below is what I received back:
Looks like that is an old part number, and the new part number is DAN5-3615X, which I don’t have an ETA for.
Sent from my SM-N986U using Tapatalk
-
Good deal. Got a few 1410 spares for a driveshaft I don't even have yet lol
Where did you see 1410s? I only see the deal on the 1350s
-
Good deal. Got a few 1410 spares for a driveshaft I don't even have yet lol
Where did you see 1410s? I only see the deal on the 1350s
Click on the item and the price is in the listing, but the overview shows regular price (https://uploads.tapatalk-cdn.com/20230809/9bb0d9021e236a21374271958b99356d.jpg)
Sent from my SM-G986U using Tapatalk
-
Good deal. Got a few 1410 spares for a driveshaft I don't even have yet lol
Where did you see 1410s? I only see the deal on the 1350s
Click on the item and the price is in the listing, but the overview shows regular price (https://uploads.tapatalk-cdn.com/20230809/9bb0d9021e236a21374271958b99356d.jpg)
Sent from my SM-G986U using Tapatalk
Thanks!
-
Good deal. Got a few 1410 spares for a driveshaft I don't even have yet lol
Where did you see 1410s? I only see the deal on the 1350s
Click on the item and the price is in the listing, but the overview shows regular price (https://uploads.tapatalk-cdn.com/20230809/9bb0d9021e236a21374271958b99356d.jpg)
Sent from my SM-G986U using Tapatalk
Thanks!
1410 is the end of the month, potentially for everyone.
Sent from my SM-N986U using Tapatalk
-
https://justdifferentials.com/dana-spicer-1350-u-joint-strongest-1350-available-old-5-447x.html
If you need 1350 u-joints for what ever reason, that price is good enough to just make art of them.
I ordered 4. Probably gonna wish I ordered more.
Thanks alot. I just ordered 10.
https://justdifferentials.com/dana-spicer-1350-u-joint-strongest-1350-available-old-5-447x.html
If you need 1350 u-joints for what ever reason, that price is good enough to just make art of them.
I ordered 4. Probably gonna wish I ordered more.
Thanks! Just ordered a few.
Bad new guys. Contacted my sales guy over there with that part number, and asked stock qty. Below is what I received back:
Looks like that is an old part number, and the new part number is DAN5-3615X, which I don’t have an ETA for.
Sent from my SM-N986U using Tapatalk
Was that from your just diff. guy or from spicer
-
https://justdifferentials.com/dana-spicer-1350-u-joint-strongest-1350-available-old-5-447x.html
If you need 1350 u-joints for what ever reason, that price is good enough to just make art of them.
I ordered 4. Probably gonna wish I ordered more.
Thanks alot. I just ordered 10.
https://justdifferentials.com/dana-spicer-1350-u-joint-strongest-1350-available-old-5-447x.html
If you need 1350 u-joints for what ever reason, that price is good enough to just make art of them.
I ordered 4. Probably gonna wish I ordered more.
Thanks! Just ordered a few.
Bad new guys. Contacted my sales guy over there with that part number, and asked stock qty. Below is what I received back:
Looks like that is an old part number, and the new part number is DAN5-3615X, which I don’t have an ETA for.
Sent from my SM-N986U using Tapatalk
Was that from your just diff. guy or from spicer
Nitro / just diff. They aren't going to drop ship from them dana, single orders.
Sent from my SM-N986U using Tapatalk
-
FYI-
Just Diffs told me this afternoon 60-90 days for the 1350 joints and 2-3 weeks for 1410.
I should have placed my order before @extremetownie hahaha
-
FYI-
Just Diffs told me this afternoon 60-90 days for the 1350 joints and 2-3 weeks for 1410.
I should have placed my order before @extremetownie hahaha
They didn't have them to being with. As soon as I saw the post, I asked my sales guy over there for live inventory. Heads up, that lead time can be shorter or longer. They have been moving everything from their Washington location to AZ, and they have a warehouse location in ATL, where my guy is at. I have been bitten by lead times a few times.
-
FYI-
Just Diffs told me this afternoon 60-90 days for the 1350 joints and 2-3 weeks for 1410.
I should have placed my order before @extremetownie hahaha
They didn't have them to being with. As soon as I saw the post, I asked my sales guy over there for live inventory. Heads up, that lead time can be shorter or longer. They have been moving everything from their Washington location to AZ, and they have a warehouse location in ATL, where my guy is at. I have been bitten by lead times a few times.
I know, I'm just relaying what they said. I already got my ubolt strap kits and am in no hurry for the rest
-
I have not got mine , or any notice. Just fingers crossed.
-
I have not got mine , or any notice. Just fingers crossed.
I started this shit show, so mine are crossed also
-
I finally got on board with ujoints.
-
I just got a message from justdiff telling me they are refunding my purchase, giving me a 15% coupon, and that I can reorder at "fair market value".
Their add for those cheap u-joints is all Ive seen since I placed the order
-
A quick search shows that no you cannot buy a 5-1350x from just diff for fair market value.
They want $83 where most places on line sell for around $25. You can walk into autozone and get it for $40.
Im not upset, I thought it was too good to be true to begin with. But I would hate for someone to use that 15% code just to find out later they still got screwed.
Tripp has a guy over there. Maybe he can shed some light on the price gouging.
-
I got the same email.
-
Ditto
-
A quick search shows that no you cannot buy a 5-1350x from just diff for fair market value.
They want $83 where most places on line sell for around $25. You can walk into autozone and get it for $40.
Im not upset, I thought it was too good to be true to begin with. But I would hate for someone to use that 15% code just to find out later they still got screwed.
Tripp has a guy over there. Maybe he can shed some light on the price gouging.
I called when everyone started ordering to find if there was stock. I didn't say anything about the pricing, but if there was stock. Sales guy told me that it was an old product number and they were converting part numbers over. My sales guy is commissioned based, and is out of the ATL wearhouse, so we have built a relationship.
What part number are you looking at and I will look into? My price may better than the coupon they are offering.
-
Yeah…. I sure hope you have a better discount than $85 for a u joint that is $25 at Auto Zone
-
I was buying Spicer 1350 u joints. Cant remember the price , but it was unrealistically good.
-
https://greenville.craigslist.org/pts/d/greer-ibex-seat-chassis-plus-parts/7659804912.html
seems like a decent price
-
A quick search shows that no you cannot buy a 5-1350x from just diff for fair market value.
They want $83 where most places on line sell for around $25. You can walk into autozone and get it for $40.
Im not upset, I thought it was too good to be true to begin with. But I would hate for someone to use that 15% code just to find out later they still got screwed.
Tripp has a guy over there. Maybe he can shed some light on the price gouging.
Guess I lucked out. Got my tracking number last week, and my one 1350 and three 1410 joints arrived today. These were at the $11 price. The box says they shipped from Daystar in AZ(https://uploads.tapatalk-cdn.com/20231002/01e6600067221fb97105c3d337c7bbd1.jpg)
Sent from my SM-G986U using Tapatalk
-
A quick search shows that no you cannot buy a 5-1350x from just diff for fair market value.
They want $83 where most places on line sell for around $25. You can walk into autozone and get it for $40.
Im not upset, I thought it was too good to be true to begin with. But I would hate for someone to use that 15% code just to find out later they still got screwed.
Tripp has a guy over there. Maybe he can shed some light on the price gouging.
Guess I lucked out. Got my tracking number last week, and my one 1350 and three 1410 joints arrived today. These were at the $11 price. The box says they shipped from Daystar in AZ(https://uploads.tapatalk-cdn.com/20231002/01e6600067221fb97105c3d337c7bbd1.jpg)
Sent from my SM-G986U using Tapatalk
That means Im done with just diff. I thought to good to be true, but I placed my order before I posted it here. So that 1350 should have been mine even if they couldn't full fill the whole order.
I'm good with "we made a mistake on the web site" or "we have no stock". But to complete other orders that came in after I placed mine and to then just cancel mine, that's bs. I'm not mad, it's just a principle thing. Their normal prices are way too high to not wait for a sale, but Id rather give my money to places with normal pricing than to wait for someone charging triple to have a sale.
-
A quick search shows that no you cannot buy a 5-1350x from just diff for fair market value.
They want $83 where most places on line sell for around $25. You can walk into autozone and get it for $40.
Im not upset, I thought it was too good to be true to begin with. But I would hate for someone to use that 15% code just to find out later they still got screwed.
Tripp has a guy over there. Maybe he can shed some light on the price gouging.
Guess I lucked out. Got my tracking number last week, and my one 1350 and three 1410 joints arrived today. These were at the $11 price. The box says they shipped from Daystar in AZ(https://uploads.tapatalk-cdn.com/20231002/01e6600067221fb97105c3d337c7bbd1.jpg)
Sent from my SM-G986U using Tapatalk
That means Im done with just diff. I thought to good to be true, but I placed my order before I posted it here. So that 1350 should have been mine even if they couldn't full fill the whole order.
I'm good with "we made a mistake on the web site" or "we have no stock". But to complete other orders that came in after I placed mine and to then just cancel mine, that's bs. I'm not mad, it's just a principle thing. Their normal prices are way too high to not wait for a sale, but Id rather give my money to places with normal pricing than to wait for someone charging triple to have a sale.
I'll sell you these for $45/each
-
A quick search shows that no you cannot buy a 5-1350x from just diff for fair market value.
They want $83 where most places on line sell for around $25. You can walk into autozone and get it for $40.
Im not upset, I thought it was too good to be true to begin with. But I would hate for someone to use that 15% code just to find out later they still got screwed.
Tripp has a guy over there. Maybe he can shed some light on the price gouging.
Guess I lucked out. Got my tracking number last week, and my one 1350 and three 1410 joints arrived today. These were at the $11 price. The box says they shipped from Daystar in AZ(https://uploads.tapatalk-cdn.com/20231002/01e6600067221fb97105c3d337c7bbd1.jpg)
Sent from my SM-G986U using Tapatalk
That means Im done with just diff. I thought to good to be true, but I placed my order before I posted it here. So that 1350 should have been mine even if they couldn't full fill the whole order.
I'm good with "we made a mistake on the web site" or "we have no stock". But to complete other orders that came in after I placed mine and to then just cancel mine, that's bs. I'm not mad, it's just a principle thing. Their normal prices are way too high to not wait for a sale, but Id rather give my money to places with normal pricing than to wait for someone charging triple to have a sale.
I'll sell you these for $45/each
Ill wait till you have a sale
-
My “just diff” order came in last week, thanks! They accidentally sent me two 1350s that I didn’t even order.
-
My “just diff” order came in last week, thanks! They accidentally sent me two 1350s that I didn’t even order.
How much for the extras? Had I known this was a legit deal I would have bought more
-
My “just diff” order came in last week, thanks! They accidentally sent me two 1350s that I didn’t even order.
I don't know that I'll share anymore crazy deals I find.
-
My “just diff” order came in last week, thanks! They accidentally sent me two 1350s that I didn’t even order.
How much for the extras? Had I known this was a legit deal I would have bought more
I guess what I paid. $8?
-
My “just diff” order came in last week, thanks! They accidentally sent me two 1350s that I didn’t even order.
I don't know that I'll share anymore crazy deals I find.
I did actually get my order. Trolling on the extra 1350s.
-
My “just diff” order came in last week, thanks! They accidentally sent me two 1350s that I didn’t even order.
How much for the extras? Had I known this was a legit deal I would have bought more
I guess what I paid. $8?
@patman going rate for 1350s is $45
Your getting hosed
-
$25 @ Auto Zone
-
Like everything else. They want to charge me $40.https://www.autozone.com/powertrain/u-joint/p/spicer-u-joint-5-1350x/895560_0_0
-
Like everything else. They want to charge me $40.https://www.autozone.com/powertrain/u-joint/p/spicer-u-joint-5-1350x/895560_0_0
I have a commercial account at Autozone and the spicers are $23.99.
-
Like everything else. They want to charge me $40.https://www.autozone.com/powertrain/u-joint/p/spicer-u-joint-5-1350x/895560_0_0
I have a commercial account at Autozone and the spicers are $23.99.
That's what i paid at advanced a couple months ago. Now they are showing $40
-
Like everything else. They want to charge me $40.https://www.autozone.com/powertrain/u-joint/p/spicer-u-joint-5-1350x/895560_0_0
I have a commercial account at Autozone and the spicers are $23.99.
I was going to say the same thing. Roger, take your business license to your favorite parts store and set up a commercial account. I have one at Oreilly, and at Oreillys it can be used in any state. I have a few friends that use mine in other states. Have to pay to use the account every time, so there is no card attached to it. Doesn't save on everything, but there are good discounts sometimes.
-
Thanks.
-
Decent deal for anyone wanting to upgrade a JK
https://www.facebook.com/groups/1733289403585274/permalink/3637310119849850/?sale_post_id=3637310119849850&mibextid=W9rl1R
-
15k miles and never been wheeled. That's a badass axle for you jk guys
-
https://www.speedmaster79.com/10004-2.5-Forged-Flex-Joint-Rh-Thread-w-Jam-Nut-Yellow-Zinc
I don't know if they are any good, but for that price I'm going to try a few.
-
Not sure it’s a good deal but…
https://www.facebook.com/share/vDHPoj7AMTbFTNSq/?mibextid=79PoIi
Sent from my iPhone using Tapatalk
-
Not sure it’s a good deal but…
https://www.facebook.com/share/vDHPoj7AMTbFTNSq/?mibextid=79PoIi
Sent from my iPhone using Tapatalk
All of that build, and they still rock the 4.0!
-
Not sure it’s a good deal but…
https://www.facebook.com/share/vDHPoj7AMTbFTNSq/?mibextid=79PoIi
Sent from my iPhone using Tapatalk
All of that build, and they still rock the 4.0!
Its ugly
For that price I would at least want to see a ls.
-
That LJ has been for sale at Brenham CDJR for awhile. Or it was a year or so ago.