Georgia Trail Riders Forum
CLASSIFIEDS => Wanted => Topic started by: cru9 on November 22, 2014, 04:41:30 PM
-
Need some help from the JK guys. Does anybody have 2 extra bolts laying that were used for factory step bars or Rubicon sliders. There are 3 on each side and these screwed straight up into the tub. I need 2 if anybody has any they aren't using.
-
I have some from the TJ, do you know what size they are?
-
I have some from the TJ, do you know what size they are?
No that's the problem. I went to hardware store today and bought several different sizes. No luck.
-
if you can't find a factory bolt, consider Threads of the South (Marietta) and/or Fastenal. Maybe a good Ace Hardware would have some unique bolts.
-
Are they to the nutserts?
-
Just gave mine away with the sold Rubi rails.
M8x1.25x30.00
-
Just gave mine away with the sold Rubi rails.
M8x1.25x30.00
Where did you find those numbers? I will go to hardware store tomorrow and see if I can find that
-
(http://tapatalk.imageshack.com/v2/14/11/22/32438719d113f9b898aa6b05d8340af2.jpg)(http://tapatalk.imageshack.com/v2/14/11/22/6f005367010163eebfefb4a769d19f5f.jpg)
Those came from mine and I have every piece of hardware that has come off mine that your welcome to come look through.
-
I would like to try the pack one in the top picture Wes
-
Just gave mine away with the sold Rubi rails.
M8x1.25x30.00
Where did you find those numbers? I will go to hardware store tomorrow and see if I can find that
http://wayalife.com/showthread.php?20243-Rubi-rock-sliders-frame-bolt-size
Seems like I had 2 sizes in the bag... can't recall.
-
Just gave mine away with the sold Rubi rails.
M8x1.25x30.00
Where did you find those numbers? I will go to hardware store tomorrow and see if I can find that
http://wayalife.com/showthread.php?20243-Rubi-rock-sliders-frame-bolt-size
Seems like I had 2 sizes in the bag... can't recall.
Awesome. Thanks
-
No problem. Just FYI, the one I showed you was an m6 1.00. The one in the pic is the one Doug described m8x1.25(http://tapatalk.imageshack.com/v2/14/11/22/39e19efedcb6570e62ad24e673eebce1.jpg)
-
No problem. Just FYI, the one I showed you was an m6 1.00. The one in the pic is the one Doug described m8x1.25(http://tapatalk.imageshack.com/v2/14/11/22/39e19efedcb6570e62ad24e673eebce1.jpg)
Do you have 2?
-
Which one? I have 12 of the dark one with 2 different heads. (http://tapatalk.imageshack.com/v2/14/11/22/2834c4e7d38f19deed518933a4514dba.jpg)
-
Should be in the bins at ace hardware
-
Those don't have history...
-
Was that pic from your garage Wes? If so I am impressed and jealous of the hardware organization. //cheers2//
-
Thanks! It's the only way I can find things...I used to just throw them into a bag and hope for the best.