Georgia Trail Riders Forum
CLASSIFIEDS => Wanted => Topic started by: Huntingman2706217 on March 30, 2011, 08:46:36 PM
-
need them so i can build drive shafts for the new axles... if ya see one in a near by JY let me know!
Travis
-
You can also run your factory shafts with a cross joint. {toast}
-
I just gotta get the part number to the joint right? The front I can... the rear is a bolt on ring style but I wonder if I can put a yoke on it from a older 10.25 so I can do this... I dunno...
-
I just gotta get the part number to the joint right? The front I can... the rear is a bolt on ring style but I wonder if I can put a yoke on it from a older 10.25 so I can do this... I dunno...
Yeah I have a couple of the joints at home so I can get the part number off the box. What year is your rear?
-
If you need a 1310-1330 bastard joint the Spicer PN is 5-134x
-
The fronts the only one I can do this with... the rear is the ring style... I called the Guy I got it from and think I'm going to pick up the front axle to match... same as what I have but for $275 I can't beat that for spare parts and he found the rear driveshaft... fronts MIA though but I should be able to figure it out pretty easily.... thanks guys!