Georgia Trail Riders Forum

CLASSIFIEDS => Suspension & Steering => Topic started by: ranier1315 on February 13, 2019, 02:34:03 PM

Title: Synergy drag link for JK Rubicon FREE
Post by: ranier1315 on February 13, 2019, 02:34:03 PM: Free to a good home. It needs new tie rod ends. You can get them from synergy not sure of price. (https://uploads.tapatalk-cdn.com/20190213/8435a001a9d53c7cc9ae6bfe8fffbf44.jpg)

Sent from my SM-G892U using Tapatalk
Title: Re: Synergy drag link for JK Rubicon FREE
Post by: Chris36l on February 13, 2019, 02:38:23 PM: I’ll take it!!

Sent from my iPhone using Tapatalk
Title: Re: Synergy drag link for JK Rubicon FREE
Post by: ranier1315 on February 13, 2019, 02:51:59 PM: It's yours. Will it fit your jeep? It's for Rubicon. Don't know if they have different knuckles or not.

Sent from my SM-G892U using Tapatalk
Title: Re: Synergy drag link for JK Rubicon FREE
Post by: Chris36l on February 13, 2019, 02:53:39 PM: Quote from: ranier1315 on February 13, 2019, 02:51:59 PM
It's yours. Will it fit your jeep? It's for Rubicon. Don't know if they have different knuckles or not.

Sent from my SM-G892U using Tapatalk
I’m sure it will, I will probably have to drill the knuckle, but would have had to anyway when I upgraded. If it doesn’t fit, I’ll just post it back up free to someone. Haha

Sent from my iPhone using Tapatalk
Title: Re: Synergy drag link for JK Rubicon FREE
Post by: BigMike on February 13, 2019, 03:57:10 PM: Quote from: Chris36l on February 13, 2019, 02:53:39 PM
Quote from: ranier1315 on February 13, 2019, 02:51:59 PM
It's yours. Will it fit your jeep? It's for Rubicon. Don't know if they have different knuckles or not.

Sent from my SM-G892U using Tapatalk
I’m sure it will, I will probably have to drill the knuckle, but would have had to anyway when I upgraded. If it doesn’t fit, I’ll just post it back up free to someone. Haha

Sent from my iPhone using Tapatalk

There is a Moog part number that is the same as the Synergy.

I’ll see if I can find it tonight. IIRC, both are left hand thred
Title: Re: Synergy drag link for JK Rubicon FREE
Post by: Blue J on February 13, 2019, 04:03:56 PM: it will fit.
What drag link did you get Marc?
Title: Re: Synergy drag link for JK Rubicon FREE
Post by: ranier1315 on February 13, 2019, 04:20:33 PM: I went with the Flip kit that uses the factory draglink. So far so good.
Title: Re: Synergy drag link for JK Rubicon FREE
Post by: cru9 on February 13, 2019, 04:40:14 PM: I have some Moog TRE’s I can’t use. Once you find the part number let me know.
Title: Synergy drag link for JK Rubicon FREE
Post by: BigMike on February 13, 2019, 06:08:02 PM: (https://uploads.tapatalk-cdn.com/20190213/a3dc43510102a9f7237e005cc725bc44.jpg)

I think I used these on the tie tod and Synergy on the drag link. The DL calls for two different TREs. The pitman side takes a single.plane TRE but not sure it matters.

Sent from my iPhone using Tapatalk
Title: Re: Synergy drag link for JK Rubicon FREE
Post by: BigPrince on February 13, 2019, 06:19:34 PM: Quote from: ranier1315 on February 13, 2019, 04:20:33 PM
I went with the Flip kit that uses the factory draglink. So far so good.

I bent my stock draglink... you sure you can't use that synergy on that kit also? (Sorry to bring this up Chris - lol)
Title: Re: Synergy drag link for JK Rubicon FREE
Post by: BigMike on February 13, 2019, 06:46:08 PM: Quote from: BigPrince on February 13, 2019, 06:19:34 PM
Quote from: ranier1315 on February 13, 2019, 04:20:33 PM
I went with the Flip kit that uses the factory draglink. So far so good.

I bent my stock draglink... you sure you can't use that synergy on that kit also? (Sorry to bring this up Chris - lol)

You damn sure can use that drag link with the flip. All I did was drill the knuckle and insert the bushing. Then raised the trackbar to the same angle. Didn't need the flip bracket because I have the artic truss with the multiple positions.

I have the drill bit if anyone needs it.

Sent from my iPhone using Tapatalk
Title: Re: Synergy drag link for JK Rubicon FREE
Post by: ranier1315 on February 14, 2019, 09:52:40 AM: Wow. Didn't think of that...... The plot thickens... Let me look in to that.
Title: Re: Synergy drag link for JK Rubicon FREE
Post by: Chris36l on February 14, 2019, 10:14:46 PM: Damn, I leave the forum for a couple days and Don starts tryin to sabotage me. LOL.

Sent from my iPhone using Tapatalk
Title: Re: Synergy drag link for JK Rubicon FREE
Post by: Blue J on February 15, 2019, 12:31:45 PM: Quote from: Chris36l on February 14, 2019, 10:14:46 PM
Damn, I leave the forum for a couple days and Don starts tryin to sabotage me. LOL.

Sent from my iPhone using Tapatalk

I have a brand new JKS drag link you can have Chris. It came with my Flip kit. I'm using the flip kit though.
Title: Re: Synergy drag link for JK Rubicon FREE
Post by: BigMike on February 15, 2019, 02:00:25 PM: Quote from: Blue J on February 15, 2019, 12:31:45 PM
Quote from: Chris36l on February 14, 2019, 10:14:46 PM
Damn, I leave the forum for a couple days and Don starts tryin to sabotage me. LOL.

Sent from my iPhone using Tapatalk

I have a brand new JKS drag link you can have Chris. It came with my Flip kit. I'm using the flip kit though.

I'm pretty sure I have a synergy flip bracket you can have Chris. I just have to find it. Don gave it to me when I bought his drag link.
Title: Re: Synergy drag link for JK Rubicon FREE
Post by: Chris36l on February 16, 2019, 04:18:50 PM: Quote from: BigMike on February 15, 2019, 02:00:25 PM
Quote from: Blue J on February 15, 2019, 12:31:45 PM
Quote from: Chris36l on February 14, 2019, 10:14:46 PM
Damn, I leave the forum for a couple days and Don starts tryin to sabotage me. LOL.

Sent from my iPhone using Tapatalk

I have a brand new JKS drag link you can have Chris. It came with my Flip kit. I'm using the flip kit though.

I'm pretty sure I have a synergy flip bracket you can have Chris. I just have to find it. Don gave it to me when I bought his drag link.
I’ll take it!! Will the JKS drag link work with the synergy bracket?

Sent from my iPhone using Tapatalk
Title: Re: Synergy drag link for JK Rubicon FREE
Post by: BigMike on February 16, 2019, 07:42:04 PM: It should work. I'll look for it tomorrow

Sent from my iPhone using Tapatalk
Title: Re: Synergy drag link for JK Rubicon FREE
Post by: Chris36l on February 17, 2019, 08:18:16 AM: Quote from: BigMike on February 16, 2019, 07:42:04 PM
It should work. I'll look for it tomorrow

Sent from my iPhone using Tapatalk
Thanks dude

Sent from my iPhone using Tapatalk
Title: Re: Synergy drag link for JK Rubicon FREE
Post by: BigMike on February 17, 2019, 10:29:28 AM: Found it. It was modified but not sure how. Don will be able to tell you.
(https://uploads.tapatalk-cdn.com/20190217/ae50e122e963cd015d0691766da89aa6.jpg)

(https://uploads.tapatalk-cdn.com/20190217/8ec9f2006c6ba2207259afa658809b5f.jpg)
Title: Re: Synergy drag link for JK Rubicon FREE
Post by: BigPrince on February 17, 2019, 05:10:10 PM: That was like 3 years ago. I believe just the one area was ground down to clear an artec truss.
Title: Re: Synergy drag link for JK Rubicon FREE
Post by: Chris36l on February 18, 2019, 02:42:01 PM: Quote from: BigMike on February 17, 2019, 10:29:28 AM
Found it. It was modified but not sure how. Don will be able to tell you.
(https://uploads.tapatalk-cdn.com/20190217/ae50e122e963cd015d0691766da89aa6.jpg)

(https://uploads.tapatalk-cdn.com/20190217/8ec9f2006c6ba2207259afa658809b5f.jpg)
I’ll take it. I’m sure I can make it work. Thanks!!

Sent from my iPhone using Tapatalk
Title: Re: Synergy drag link for JK Rubicon FREE
Post by: BigMike on February 18, 2019, 03:46:00 PM: No problem Chris, glad it will get used. I'm in Roswell and work in Alpharetta. Not sure where you are.

Sent from my iPhone using Tapatalk
Title: Re: Synergy drag link for JK Rubicon FREE
Post by: Chris36l on February 19, 2019, 07:33:02 AM: Quote from: BigMike on February 18, 2019, 03:46:00 PM
No problem Chris, glad it will get used. I'm in Roswell and work in Alpharetta. Not sure where you are.

Sent from my iPhone using Tapatalk
Live in braselton and work between Stone Mountain and Flowery Branch. Works a little crazy right now, I’ll PM you and we can figure something out.

Sent from my iPhone using Tapatalk