Georgia Trail Riders Forum
CLASSIFIEDS => Wanted => Topic started by: Will on August 12, 2008, 09:56:29 PM
-
Looking for a set of 4" Round LED stop/turn/tail lights.
Trail corners. Preferably short style, but if the price is right I'll look at full corners . Mostly just to cover up some damage, but would like to get some protection too. Would also like them to be 3/16" thick, but smaller will do.
Thanks,
Will
-
Looking for a set of 4" Round LED stop/turn/tail lights.
Trail corners. Preferably short style, but if the price is right I'll look at full corners . Mostly just to cover up some damage, but would like to get some protection too. Would also like them to be 3/16" thick, but smaller will do.
Thanks,
Will
I thought you were going to bend us up some!
-
I thought you were going to bend us up some!
Didn't get it done. I'm leaving for school this weekend and I don't want to wait til next summer. I've still gotta sand blast and repaint my rear bumper, weld a new antenna mount to my bumper, and cut on the 8.8 a little so it doesn't cut into my gas tank skid and annoy the piss out of you again ;D.
I seriously just didn't have time for any Jeep stuff this last half of the summer. We've been super busy at work. We owe all that to Duracell, but at least they pay good :P So I get this one week off to get all my crap ready for school and fix all the crap wrong with the Jeep before I go. I wish I had time to build all my skids like I planned, but I only really got the new lift and 8.8 done.
-
Just snooped around for a sec. Didnt remember who makes short 3/16" corners....found some full 3/16 for $225 but they havent been produced yet...I dont know why they publish stuff in cataloges thats not in production..
-
Travis, you still have those round rear led lights!? I still want a set!!
-
I saw some cool lights on Extreme4x4 recently, but they are all pricey. I want to do the corners and LED's together, so I'll start looking for a deal.
-
Travis, you still have those round rear led lights!? I still want a set!!
Yep. Got some still. Got one set of those mounts powder coated too...they look great...still dont know what to do with them though.
-
http://www.4wd.com/productdetails.aspx?partID=14596
Probably end up getting something like this. Those OROs are just DUMB!
I want to get the Rokmen 3/16" short corners but they'll be on back order forever it seems. I may just end up ordering these, even though I think it's pretty pricey for what it is.
http://www.quadratec.com/products/12525_300.htm
-
http://www.4wd.com/productdetails.aspx?partID=14596
Probably end up getting something like this. Those OROs are just DUMB!
I want to get the Rokmen 3/16" short corners but they'll be on back order forever it seems. I may just end up ordering these, even though I think it's pretty pricey for what it is.
http://www.quadratec.com/products/12525_300.htm
I've got to upgrade from the plastic band aid I have on mine now. I want to go full corners, LED's, and tube fronts at the same time. I'm not sure which look I like the most, flares or no flares, and comp cut or standard. I think this red jeep has it right:
(http://i245.photobucket.com/albums/gg46/reynoldsdb/2000%20Jeep%20Wrangler/2139011_202_full.jpg)
(http://i245.photobucket.com/albums/gg46/reynoldsdb/2000%20Jeep%20Wrangler/SJeep7.jpg)
-
That second one is super clean.
-
Just get the $8 incadescant ones! Mine seem brighter from a few feet than LED ones anyway.
-
That second one is super clean.
x2. The second one is bad azz. Who makes that?
-
That second one is super clean.
x2. The second one is bad azz. Who makes that?
That cut looks custom, but I'm not sure who makes the corner. Doug, you got the info on that?
-
Just get the $8 incadescant ones! Mine seem brighter from a few feet than LED ones anyway.
Well I'll hit you up when I get some corners
-
That second one is super clean.
x2. The second one is bad azz. Who makes that?
That cut looks custom, but I'm not sure who makes the corner. Doug, you got the info on that?
Yeah, I was thinking the cut might be custom. Looks nice.
-
That second one is super clean.
x2. The second one is bad azz. Who makes that?
That cut looks custom, but I'm not sure who makes the corner. Doug, you got the info on that?
Sorry, I don't. it was this Jeep off of Ebay awhile back:
(http://i245.photobucket.com/albums/gg46/reynoldsdb/2000%20Jeep%20Wrangler/SJeep1.jpg)
-
I was thinking Poison Spyder but I've never noticed that short style tube. I can't get on their site from my folks' computer. ha super old. Somebody go find them on there.
I remember somebody posting that though. I think it was you Doug. Got any more pics with those corners?
-
I'm guessing Poison Spyder because of the sliders. Nice rig.
-
Those must be their comp corners. It's way too nice to be custom and the way that flare stops too... money, money, money :P
-
Travis, you still have those round rear led lights!? I still want a set!!
Yep. Got some still. Got one set of those mounts powder coated too...they look great...still dont know what to do with them though.
Let me have them for a business right off. ADVERTISEMENT MAN! ;D
-
Travis, you still have those round rear led lights!? I still want a set!!
Yep. Got some still. Got one set of those mounts powder coated too...they look great...still dont know what to do with them though.
Let me have them for a business right off. ADVERTISEMENT MAN! ;D
Exactly! Ben and I will use em! Unlike that sparklin thing which looks like it was advertisement for a Honda dealership. :P
-
:D
-
Travis, you still have those round rear led lights!? I still want a set!!
Yep. Got some still. Got one set of those mounts powder coated too...they look great...still dont know what to do with them though.
Let me have them for a business right off. ADVERTISEMENT MAN! ;D
Exactly! Ben and I will use em! Unlike that sparklin thing which looks like it was advertisement for a Honda dealership. :P
But oh man, I'd like to have that "sparklin thang" and make a few changes! It is a big buck build with a Hemi.
-
The second pic is PSC comp cut corners with the flares. The red jeep had PSC tub fenders and Sniper Fab rear corners.
-
The second pic is PSC comp cut corners with the flares. The red jeep had PSC tub fenders and Sniper Fab rear corners.
Thanks, I title my photos so I'll remember!
-
Travis, you still have those round rear led lights!? I still want a set!!
Yep. Got some still. Got one set of those mounts powder coated too...they look great...still dont know what to do with them though.
Let me have them for a business right off. ADVERTISEMENT MAN! ;D
I'm just not happy about the cost to get them made...still cant find a good place to produce them cheap...dont want to send them off to china....how about this. I'll lend you a pair of the unfinished housings for demonstration purposes??? Finish them how ever you like? I only got one pair powder coated...and I have another place to send those off to...If you ever take them off to replace with something else just send them back to me???? As for the led's...I'll make you a good deal on the lights.
-
I got my 4" led's at Harbor Freight for $14 each