Georgia Trail Riders Forum
MEMBERS DISCUSSION AREA => General Discussion => Topic started by: Alex on April 16, 2009, 12:36:15 PM
-
I am gong to be buying some 1.5x.250 wall dom to make my trackbar and steering. I have to by a 20ft stick of it but i only need like 11 or so feet. Anyone interested in the other 9 or 10 feet of it? Depending on the my cost (5 to 10 a foot) i will sell it for around 3.50 a foot if i pay 5 and more if i have to pay more. Just let me know.
-
Too bad you don't live near Atlanta. I could hook you up.
I can check on a price for it at least. Maybe bring it to Gainsville for the show, not sure how I'd get it there though.
-
Hey, if you can get me a good price, i will drive down to Atlanta to get it. Let me know a price. thanks
-
I can get the DOM 1.5 x .250 wall x 20' for $5.42 per foot. Will come out of Chattanooga and take me a couple days to get it on our floor here.
If the wall thickness isn't critical I can get you a piece of 1-1/4 Schedule 80 pipe x 21' for $1.36 per foot. The OD on the pipe is 1.52" with a 3/16 wall. But it is pipe so the wall thickness will vary a bit but not greatly. And we have this in stock here.
Are you planning on sleeving your trackbar?
-
I will let you know. What do you mean by sleeving my trackbar? I am build building the steering and trackbar out of the 1.5 tubing
-
Alex PM me when you find out what you are going to do, I could use 2 or 3 foot, I need to build a anti wrap bar. I'll talk to you Friday if you show before I head back to Atl.
-
Alright, i will be there aound 4 pm.
-
I was thinking tie rod my bad. I heard about a mod where guys were sliding a piece of pipe over their tie rod to add strength.
If you get me the exact length on that piece I can cut it for you as well, no charge.
-
We can trade out for them hubs.... ;D
-
Sure richard, why not ;D