Georgia Trail Riders Forum

CLASSIFIEDS => Wanted => Topic started by: xjcrawler on August 28, 2013, 09:32:06 PM

Title: Wanted Dana 35 For 97 XJ With 3.55 Gears
Post by: xjcrawler on August 28, 2013, 09:32:06 PM

Let me know what you've got, closer to Lake Lanier the better. Thanks

Title: Re: Wanted Dana 35 For 97 XJ With 3.55 Gears
Post by: 94xjsport94 on August 28, 2013, 09:45:49 PM

I'm gonna have a 8.25 out of my 94 in a few weeks. Interested?

Title: Re: Wanted Dana 35 For 97 XJ With 3.55 Gears
Post by: clark123456 on August 29, 2013, 12:04:14 AM

I have a D35 with 3.07s out of a 98 TJ with 60K miles on it.  I couldn't tell if you were planning to install 3.55s or must have them installed already.  E-brake cables are cut off close to drum housing.

Title: Re: Wanted Dana 35 For 97 XJ With 3.55 Gears
Post by: xjcrawler on August 29, 2013, 09:13:27 AM

The only thing that is a bolt in, is a Dana 35 leaf spring mount with 3.55 gears.

Title: Re: Wanted Dana 35 For 97 XJ With 3.55 Gears
Post by: 94xjsport94 on August 29, 2013, 05:21:53 PM

My 8.25 is bolt in too. Driveshaft won't work, about 1" too short if swapping from a 35. If you have an SYE it'll be fine though. I'll post in the Ga thread on CF

Title: Re: Wanted Dana 35 For 97 XJ With 3.55 Gears
Post by: xjcrawler on August 31, 2013, 08:38:42 AM

Quote from: 94xjsport94 on August 29, 2013, 05:21:53 PM

Driveshaft won't work, about 1" too short if swapping from a 35.

That would mean it is not a bolt in for where a Dana 35 is.