Georgia Trail Riders Forum
MEMBERS DISCUSSION AREA => General Discussion => Topic started by: BigMike on December 25, 2015, 09:24:45 PM
-
I got 2 Poison Spyder diff covers
Set of LED Rock Lights (20) with quick connect wires http://under-glow.com/ (http://under-glow.com/)
-
4wheel parts gift card and some jeep repair bills covered.
-
Not much jeep related stuff, but a couple of things I asked for.
One cool thing that wasn't on the list is a beanie with leds on it.
-
Front Aluminum Antirock for the JK
Glock 43 with kydex holster
Leupold Optic for my SCAR17
XBOX One
Some nike powerlifting shoes
-
Sandy got me a first gen PS90 and my oldest son got me a rechargeable LED work light.
-
Sandy got me a first gen PS90 and my oldest son got me a rechargeable LED work light.
Details on the led please. Have wanted a rechargeable for years but haven't purchased one.
-
My xmas came early. New fox shocks from Allsouth. A new AR-15 and a new Glock 43. And I have a metal cloak rock rail suppose to be coming some time.
-
Sandy got me a first gen PS90 and my oldest son got me a rechargeable LED work light.
Details on the led please. Have wanted a rechargeable for years but haven't purchased one.
It has both an AC and cigarette lighter charging adaptors. Seems pretty bright, we'll see how well it works. I got tired of having to change light bulbs in my drop light every time it got dropped. Kinda the wrong name for it if you ask me...
http://www.sears.com/craftsman-cordless-rechargeable-work-light-with-35-led/p-03473904000P (http://www.sears.com/craftsman-cordless-rechargeable-work-light-with-35-led/p-03473904000P)
-
My xmas came early. New fox shocks from Allsouth. A new AR-15 and a new Glock 43. And I have a metal cloak rock rail suppose to be coming some time.
Your sliders came in Friday
I got plane tix to Sema. Thought that was a pretty thoughtful gift, considering it's from my mother in law!
Sent from my SM-N920P using Tapatalk
-
I got all 20 LEDs installed yesterday and hooked up to my (homemade (http://www.jkowners.com/forum/showthread.php?t=148577)) SPOD.
(http://i163.photobucket.com/albums/t314/BigMikeATL/14JKR/20151227_143134_zpsbwxjnuth.jpg)
-
Those are bright. Very nice
-
Those are bright. Very nice
160 lumens for each pod. No more flashlights trying to get up hills at night. :)
-
Those are bright. Very nice
160 lumens for each pod. No more flashlights trying to get up hills at night. :)
What brand are they?
-
My xmas came early. New fox shocks from Allsouth. A new AR-15 and a new Glock 43. And I have a metal cloak rock rail suppose to be coming some time.
Your sliders came in Friday
Sent from my SM-N920P using Tapatalk
I will try and come pick them up next week sometime. thanks.
-
Those are bright. Very nice
160 lumens for each pod. No more flashlights trying to get up hills at night. :)
What brand are they?
http://under-glow.com/collections/lights/products/ez-connect-v2-rock-lights-4x4-lights (http://under-glow.com/collections/lights/products/ez-connect-v2-rock-lights-4x4-lights)
-
^^^nice
-
Those are bright. Very nice
160 lumens for each pod. No more flashlights trying to get up hills at night. :)
What brand are they?
http://under-glow.com/collections/lights/products/ez-connect-v2-rock-lights-4x4-lights (http://under-glow.com/collections/lights/products/ez-connect-v2-rock-lights-4x4-lights)
How did you mount them?
Adhesive tape
-
Those are bright. Very nice
160 lumens for each pod. No more flashlights trying to get up hills at night. :)
What brand are they?
http://under-glow.com/collections/lights/products/ez-connect-v2-rock-lights-4x4-lights (http://under-glow.com/collections/lights/products/ez-connect-v2-rock-lights-4x4-lights)
How did you mount them?
Adhesive tape
Yes - I wiped each area with brake parts cleaner and the adhesive is super sticky.
-
Super like!
-
Welding table
Had to buy it myself, inbound. Hope to weld it up in a couple weeks
-
Welding table
Had to buy it myself, inbound. Hope to weld it up in a couple weeks
Which one did you get?
-
Scuffed them with a scotch-brite pad and wiped them down with acetone.
Taping these up is a MAJOR PITA. All I can say is use the thinnest tape and have sharp Xacto knives.
(http://i163.photobucket.com/albums/t314/BigMikeATL/Forums/20151229_100109_zpsupglzqju.jpg) (http://s163.photobucket.com/user/BigMikeATL/media/Forums/20151229_100109_zpsupglzqju.jpg.html)
Put 3 coats of Ford Red engine enamel on them
(http://i163.photobucket.com/albums/t314/BigMikeATL/Forums/20151229_114133_zpswgwtbkxc.jpg) (http://s163.photobucket.com/user/BigMikeATL/media/Forums/20151229_114133_zpswgwtbkxc.jpg.html)
Start the peeling process - another PITA
(http://i163.photobucket.com/albums/t314/BigMikeATL/Forums/20151229_114140_zps2kq2qkvx.jpg)
Finished product. There were a few lines that weren't that great after peeling the tape so I touched those up with Rustoleum Gloss Black and a little brush.
(http://i163.photobucket.com/albums/t314/BigMikeATL/Forums/20151229_133751_zpsnzf0zmn0.jpg) (http://s163.photobucket.com/user/BigMikeATL/media/Forums/20151229_133751_zpsnzf0zmn0.jpg.html)
-
Mike, those are too nice to scuff up on rocks.
-
Scuffed them with a scotch-brite pad and wiped them down with acetone.
Taping these up is a MAJOR PITA. All I can say is use the thinnest tape and have sharp Xacto knives.
(http://i163.photobucket.com/albums/t314/BigMikeATL/Forums/20151229_100109_zpsupglzqju.jpg) (http://s163.photobucket.com/user/BigMikeATL/media/Forums/20151229_100109_zpsupglzqju.jpg.html)
Put 3 coats of Ford Red engine enamel on them
(http://i163.photobucket.com/albums/t314/BigMikeATL/Forums/20151229_114133_zpswgwtbkxc.jpg) (http://s163.photobucket.com/user/BigMikeATL/media/Forums/20151229_114133_zpswgwtbkxc.jpg.html)
Start the peeling process - another PITA
(http://i163.photobucket.com/albums/t314/BigMikeATL/Forums/20151229_114140_zps2kq2qkvx.jpg)
Finished product. There were a few lines that weren't that great after peeling the tape so I touched those up with Rustoleum Gloss Black and a little brush.
(http://i163.photobucket.com/albums/t314/BigMikeATL/Forums/20151229_133751_zpsnzf0zmn0.jpg) (http://s163.photobucket.com/user/BigMikeATL/media/Forums/20151229_133751_zpsnzf0zmn0.jpg.html)
Came out real nice!
-
Very nice!
- Torg
-
Thanks, it is the last paint I will put on them for YEARS!
-
Welding table
Had to buy it myself, inbound. Hope to weld it up in a couple weeks
Which one did you get?
One from here, http://weldtables.com (http://weldtables.com)
I've heard they build to order, so it might take some time.
Also, kinda new to the game...
Thicker would of been better, but for the small projects I do should be fine
-
Welding table
Had to buy it myself, inbound. Hope to weld it up in a couple weeks
Which one did you get?
One from here, http://weldtables.com (http://weldtables.com)
I've heard they build to order, so it might take some time.
Also, kinda new to the game...
Thicker would of been better, but for the small projects I do should be fine
Yeah, mine is 1/2" steel plate that is 4' x 4'. I welded the top to 2" (3/16") square tube with 2" (again, 3/16") angle iron supports along the bottom, and 4 big ass casters...it is freaking heavy as hell...and it was very expensive! IF I had it to do over again, I don't know that I would do what I did; I nearly lost a limb just getting the plate out of the bed of the truck...I shouldn't have done it alone.
Those slots should be awesome for blocking out and squaring your projects. If you don't already have them, get a lot of clamps of various sizes. I also use the magnetic angle pieces (usually red and look like arrows with the point missing) a lot...very nice to have around.
Good luck...be sure to post up some of your creations.
-
It should be decent. I didn't want to go the whole 1/2' or larger plate route, but things might change. I need to build another work table soon, might do something like that as well. This just seemed to be a good medium route and not a bunch of $$$$.
-
Yeah, I can't remember what I'm in, but I think the casters were like $30 each.
- Torg
-
(http://i163.photobucket.com/albums/t314/BigMikeATL/14JKR/psc_cover_zpsi0zfyohg.jpg)
-
Looks killer! ^^
-
Nice job
-
(http://i163.photobucket.com/albums/t314/BigMikeATL/14JKR/psc_cover_zpsi0zfyohg.jpg)
a REAL Steelers fan would have painted that spider yellow.
-
That's looks really good!
Sent from my iPhone 6 using Tapatalk
-
Looks Great!!!
-
Looking good.
-
//10//