Georgia Trail Riders Forum

MEMBERS DISCUSSION AREA => General Discussion => Topic started by: Krawler00 on May 23, 2008, 01:07:57 PM

Title: Skyjacker transfer case bracket...
Post by: Krawler00 on May 23, 2008, 01:07:57 PM: Okay, I got the bracket on this morning after having to do some serious rework on the design. Apparently the bracket was made for automatic transmissions and nobody cared to make one for the manual. In short if you buy this you will need to drill 2 holes to slide one half of the bracket over and use some spacers to get it to cleaar the bracket when pulling into 4 lo. No mention of it on any writeups or in the instructions. And yes... there is only 1 way it can be put on. Just so you all know! Took 2 hours which should have been maybe 45. Alot of work for $60!!
Title: Re: Skyjacker transfer case bracket...
Post by: DOUG on May 23, 2008, 02:01:59 PM: Man, you're good. When can I drop off the TJ ;D and the Gas Tank Skid for install?
Title: Re: Skyjacker transfer case bracket...
Post by: Krawler00 on May 23, 2008, 02:03:01 PM: You can't afford me! ;D
Title: Re: Skyjacker transfer case bracket...
Post by: DOUG on May 23, 2008, 02:05:48 PM: I thought you said $60 for 2 hours! :D :D
Title: Re: Skyjacker transfer case bracket...
Post by: Krawler00 on May 23, 2008, 02:09:04 PM: HUH? You smokin that pipe again?
Title: Re: Skyjacker transfer case bracket...
Post by: DOUG on May 23, 2008, 04:09:23 PM: Quote from: Krawler00 on May 23, 2008, 01:07:57 PM
Took 2 hours which should have been maybe 45. Alot of work for $60!!

I knew you said it!
Title: Re: Skyjacker transfer case bracket...
Post by: Ben H. on May 23, 2008, 06:49:18 PM: Is this a drop bracket or something else?
Title: Re: Skyjacker transfer case bracket...
Post by: Will on May 23, 2008, 07:09:22 PM: There are two separate designs, one for auto and one for manual. Only reason I know is cause Quadratec sent me the manual bracket first. :) As long as it fits ;)
Title: Re: Skyjacker transfer case bracket...
Post by: Krawler00 on May 23, 2008, 10:46:30 PM: Doug, I meant $60 for the part. As for the bracket, they may have sent the wrong bracket but, they are identical looking. But obviously not when you go to install it!