Georgia Trail Riders Forum
MEMBERS DISCUSSION AREA => General Discussion => Topic started by: flashover101 on April 27, 2017, 07:20:05 PM
-
What would you recommend having on hand during rides with regards to spare parts?
Sent from my iPhone using Tapatalk
-
I bring every tool I own, just in case.
As for spare parts:
- Rear shafts
- Front shafts
- 2 interchangeable drive shafts
- 4 drive shaft yokes- they are cast
- various fluids
Luckily, the parts stores are within 20 minutes or less of most of the parks we visit.
-
I bring hubs, u joints, a butt load of tools, all fluid I could ever need
Sent from my SM-G930V using Tapatalk
-
The right tools to do the job.
Only bring the spares your willing to change.
Drive shafts are nice bit unless you can get to them without moving every said skid plate, then how likely are you to do it?
Sent from my SM-G935V using Tapatalk
-
What they said tool wise plus anything specialty or some tool I've made for a specific purpose.
Depends on where I am as to how likely I am to fix something bad... if it's under 4 hours I'll go home and do it. Or let it sit on the trailer a few weeks
-
Drive shafts are nice bit unless you can get to them without moving every said skid plate, then how likely are you to do it?
Sent from my SM-G935V using Tapatalk
Pretty likely if you didn't trailer
-
Thanks for the ideas!
Sent from my iPhone using Tapatalk
-
@tcdawg has a couple spares for sale...I recommend those. if you do not have them already.
-
@tcdawg has a couple spares for sale...I recommend those. if you do not have them already.
Are they stock spares or upgraded?
Sent from my iPhone using Tapatalk
-
@tcdawg has a couple spares for sale...I recommend those. if you do not have them already.
Are they stock spares or upgraded?
Sent from my iPhone using Tapatalk
The rear shafts are Ten Factory Chromo's but both have a slightly bent flange. Good strong axle shafts with bearings, seals and lugs already installed. Real good for a trail spare
-
Spare hydro line if you have hydro assist.
Also depends on how far away the trip is and how many days I am staying.
If I am heading to Harlan for a 3-5 day stay I will carry generator, welder, grinder and a bunch of other stuff that I wouldn't take on a day trip.
-
I bring Todd @tazstoy //LMAO//
-
I bring Todd @tazstoy //LMAO//
(https://uploads.tapatalk-cdn.com/20170428/36779968e6a2a8454db93d5cf44c6767.png)
Sent from my iPhone using Tapatalk
-
I bring Todd @tazstoy //LMAO//
(https://uploads.tapatalk-cdn.com/20170428/36779968e6a2a8454db93d5cf44c6767.png)
Sent from my iPhone using Tapatalk
Thats all of our 1st choice. //SLAMIN//
-
@tcdawg has a couple spares for sale...I recommend those. if you do not have them already.
Are they stock spares or upgraded?
Sent from my iPhone using Tapatalk
The rear shafts are Ten Factory Chromo's but both have a slightly bent flange. Good strong axle shafts with bearings, seals and lugs already installed. Real good for a trail spare
Still have the shafts for sale?
Sent from my iPhone using Tapatalk
-
@tcdawg has a couple spares for sale...I recommend those. if you do not have them already.
Are they stock spares or upgraded?
Sent from my iPhone using Tapatalk
The rear shafts are Ten Factory Chromo's but both have a slightly bent flange. Good strong axle shafts with bearings, seals and lugs already installed. Real good for a trail spare
Still have the shafts for sale?
Sent from my iPhone using Tapatalk
Yes
-
Sold!
Sent from my iPhone using Tapatalk