Georgia Trail Riders Forum
		MEMBERS DISCUSSION AREA => General Discussion => Topic started by: tjsahara00 on October 11, 2019, 07:45:22 AM
		
			
			- 
				What's everyone got going on?
 We're having a birthday party for
 one of my granddaughter who is 5.
 Gonna be fun times!
- 
				In Reno, NV for a wedding and lots of golf!
 
 
 Sent from my iPhone using Tapatalk
- 
				working on fixing crap at the house after work. ..  not too fun.  but looking forward to Sat. ... lunch.. for some much needed college football and typical red-neck-arm-chair-coaching.  :)   
 
- 
				Fishing on the lake tonight with the family. 
 Over fall break they were in Panama city fishing off the pier.
 
 My kids are hooked.
- 
				Getting ready for Harlan!  A bunch to do:
 - fully grease trailer axles
 - swap vulcanized tire for one on the jeep that is cut but holding air
 - make the windshield more quickly removable for Lions Den
 - get the glass replaced in the windshield
 - repack trail tools
 
 
 Separately, I'm still organizing the basement...it's an incredibly terrible activity.
 
 Sent from my SM-G960U using Tapatalk
 
 
- 
				Duckin' out of work early today. Jeep is loaded for an "overlanding" camping trip to NC to go Trout fishing. The only news I want to see is the sun rise, hot coffee, the tug on my line, and a campfire.
			
- 
				Oh man Clark...the year you do Lions Den 
 and I won't be there. Dang I would have ask
 to ride shotgun for that.     [slammin]
- 
				..... tug on my line....
 
 I good tug is nice every now & again.
- 
				OU/Texass game on sat, then start the pain in the ass job of cutting off the old brackets on the new axles. 
			
- 
				Airbags on the truck
 Grease trailer axles and mount Jeep spare to deck
- 
				- make the windshield more quickly removable for Lions Den
 
 I'm hoping the new windshield guards are up to task
- 
				Picking up new to me trailer
 Maybe one night camping trip with 6yo
 Apple festival with fam
 Finish Jeep prep for Harlan
 -diff service
 -grease joints, bolt check
 -copy Clark's quick windshield removal
 Truck
 -tranny fluid
 
 Fix whatever I break along the process.  
- 
				May be picking up some 18 x10 wheels for the JKU...... anybody need some
 20 x 12 wheels?
- 
				Playing in a Golf Tournament tomorrow then my baby girls 18th birthday Sunday. 
 
- 
				Playing in a Golf Tournament tomorrow then my baby girls 18th birthday Sunday.
 
 Good luck!
 
 Sent from my SM-G960U using Tapatalk
 
 
- 
				I will be playing golf next Thursday.
 A tooling vendor is taking me out. Looking forward to it. Last time we went out about a month ago it was too damn hot.
- 
				Working 6 days. 
 Then fix an rzr ball joint
 Remove tj gas tank
 Install new drier
 Yard work
 House chores
 Website work
 Whatever else that gonna be worked on. Never ends.
 Wanted to ride sxs sunday but looks like rain last I checked.
 
 Sent from my SM-N960U using Tapatalk
 
 
- 
				On the road to the my parents house in NC. Started off with some nice cars on 985 heading past Gainesville. (https://uploads.tapatalk-cdn.com/20191011/66e3b07736c43274d43b1bd55231bb5d.jpg)
 
 Ford GT and a VW van(https://uploads.tapatalk-cdn.com/20191011/ce7fa70a004151f4862fef8ded75d944.jpg)(https://uploads.tapatalk-cdn.com/20191011/8fd94b6c1806077e9bd3f1d06d0899c0.jpg)
 
 
 Sent from my iPhone using Tapatalk
- 
				Burn some bondo!
			
- 
				It's the Petit Le Mans at Road Atlanta this weekend. Hence the nice cars on 985.
			
- 
				May be picking up some 18 x10 wheels for the JKU...... anybody need some
 20 x 12 wheels?
 
 Told the guy I would buy the
 wheels Sunday. He said ok
 if he still had them. He sold
 them tonight....I knew that
 wouldn't last at the listed
 price. Well damn
 
 
- 
				Can't beat these views!
 (https://uploads.tapatalk-cdn.com/20191012/ee07cd761b5dbc063c069b147d59c891.jpg)(https://uploads.tapatalk-cdn.com/20191012/20b895d31c424b7927f3dd815158f9f4.jpg)(https://uploads.tapatalk-cdn.com/20191012/0583d60200039ed9c4d72d317ebf1020.jpg)
 
 
 Sent from my iPhone using Tapatalk
- 
				Awesome
			
- 
				I wanted to go. Maybe I can 
 
 Sent from my SM-N960U using Tapatalk
 
 
- 
				Oh man Clark...the year you do Lions Den 
 and I won't be there. Dang I would have ask
 to ride shotgun for that.     [slammin]
 
 You can still come up...Tmac has a bed available in his cabin.  Truck departs on Wednesday morning...we'll talk about anything but politics for the 18 hour drive to and fro!
 
 
 
 Sent from my SM-G960U using Tapatalk
 
 
- 
				Getting ready for Harlan!  A bunch to do:
 - fully grease trailer axles
 - swap vulcanized tire for one on the jeep that is cut but holding air
 - make the windshield more quickly removable for Lions Den
 - get the glass replaced in the windshield
 - repack trail tools
 
 
 Separately, I'm still organizing the basement...it's an incredibly terrible activity.
 
 Sent from my SM-G960U using Tapatalk
 
 I'm likely to not get my goals accomplished :(
 
 Trailer grease done
 Tires swapped
 Tools sorted
 
 Can't get the freaking hinge apart...looking to Justin for tips and tricks.
 
 Windshield glass still not replaced...doh!
 
 Sent from my SM-G960U using Tapatalk
 
 
- 
				The torx bolts stuck? I thought it was just 4 on each side at the bottom and the 2 at the top to the cage?
			
- 
				The torx bolts stuck? I thought it was just 4 on each side at the bottom and the 2 at the top to the cage?
 
 I cut both ends off and can't get the hinge bolt to come out.  The bolt is splined on both ends, and is in there tightly.
 
 (https://uploads.tapatalk-cdn.com/20191013/a9e5f66dd60c7c55f682d640b087bf6d.jpg)(https://uploads.tapatalk-cdn.com/20191013/765fc7d1e4ea81eae00b9dbe707bce6c.jpg)
 
 Sent from my SM-G960U using Tapatalk
 
 
- 
				The torx bolts stuck? I thought it was just 4 on each side at the bottom and the 2 at the top to the cage?
 
 I cut both ends off and can't get the hinge bolt to come out.  The bolt is splined on both ends, and is in there tightly.
 
 (https://uploads.tapatalk-cdn.com/20191013/a9e5f66dd60c7c55f682d640b087bf6d.jpg)(https://uploads.tapatalk-cdn.com/20191013/765fc7d1e4ea81eae00b9dbe707bce6c.jpg)
 
 Sent from my SM-G960U using Tapatalk
 
 Wow. Break out the drill press
 
 
 Sent from my iPhone using Tapatalk
- 
				The torx bolts stuck? I thought it was just 4 on each side at the bottom and the 2 at the top to the cage?
 
 I cut both ends off and can't get the hinge bolt to come out.  The bolt is splined on both ends, and is in there tightly.
 
 (https://uploads.tapatalk-cdn.com/20191013/a9e5f66dd60c7c55f682d640b087bf6d.jpg)(https://uploads.tapatalk-cdn.com/20191013/765fc7d1e4ea81eae00b9dbe707bce6c.jpg)
 
 Sent from my SM-G960U using Tapatalk
 
 Wow. Break out the drill press
 
 
 Sent from my iPhone using Tapatalk
 
 That's likely what I'll do
 
 Sent from my SM-G960U using Tapatalk
 
 
- 
				The torx bolts stuck? I thought it was just 4 on each side at the bottom and the 2 at the top to the cage?
 
 I cut both ends off and can't get the hinge bolt to come out.  The bolt is splined on both ends, and is in there tightly.
 
 (https://uploads.tapatalk-cdn.com/20191013/a9e5f66dd60c7c55f682d640b087bf6d.jpg)(https://uploads.tapatalk-cdn.com/20191013/765fc7d1e4ea81eae00b9dbe707bce6c.jpg)
 
 Sent from my SM-G960U using Tapatalk
 
 Wow. Break out the drill press
 
 
 Sent from my iPhone using Tapatalk
 
 That's likely what I'll do
 
 Sent from my SM-G960U
 
 Might be worth it to just buy a new set if you don't mind if they're paint matched (I know how ocd you are about everything matching)
- 
				Get a BFH and a punch. I think you have to drive it out.
 
 
 Sent from my iPhone using Tapatalk Pro
- 
				Get a BFH and a punch. I think you have to drive it out.
 
 
 Sent from my iPhone using Tapatalk Pro
 
 Yeah, I need you to show me how that works. :)
- 
				Get a BFH and a punch. I think you have to drive it out.
 
 
 Sent from my iPhone using Tapatalk Pro
 
 Yeah, I need you to show me how that works. :)
 
 
 Haha I'm only commenting on what I've read others do. I've got no personal experience with it.
 
 
 Sent from my iPhone using Tapatalk Pro
- 
				While I'm not zealot for the UD60 axles, I had the crate boards leftover, so yesterday I made a piece of garage "art":
 (https://uploads.tapatalk-cdn.com/20191013/862b8a876527f2e7fd368d9d9a18a8a0.jpg)
 
 Sent from my SM-G960U using Tapatalk
 
 
- 
				While I'm not zealot for the UD60 axles, I had the crate boards leftover, so yesterday I made a piece of garage "art":
 (https://uploads.tapatalk-cdn.com/20191013/862b8a876527f2e7fd368d9d9a18a8a0.jpg)
 
 Sent from my SM-G960U using Tapatalk
 
 Looks good
 
 Sent from my SM-N960U using Tapatalk
 
 
- 
				A little late to this new thread.  
 
 It's no longer Friday but I did spend Friday blasting through the Valley of Fire north of Las Vegas.  We rented RZR's and they were a freaking blast.
 
 (https://uploads.tapatalk-cdn.com/20191013/1168ee6e3e8da1c86b01904332f75fe3.jpg)
 
 (https://uploads.tapatalk-cdn.com/20191013/93337d79e2956d015d813a13039f49f8.jpg)
- 
				A little late to this new thread.  
 
 It's no longer Friday but I did spend Friday blasting through the Valley of Fire north of Las Vegas.  We rented RZR's and they were a freaking blast.
 
 (https://uploads.tapatalk-cdn.com/20191013/1168ee6e3e8da1c86b01904332f75fe3.jpg)
 
 (https://uploads.tapatalk-cdn.com/20191013/93337d79e2956d015d813a13039f49f8.jpg)
 
 I want dibs on the LJ when you sell it for SXS funding
 
 Sent from my SM-G960U using Tapatalk
 
- 
				A little late to this new thread.  
 
 It's no longer Friday but I did spend Friday blasting through the Valley of Fire north of Las Vegas.  We rented RZR's and they were a freaking blast.
 
 (https://uploads.tapatalk-cdn.com/20191013/1168ee6e3e8da1c86b01904332f75fe3.jpg)
 
 (https://uploads.tapatalk-cdn.com/20191013/93337d79e2956d015d813a13039f49f8.jpg)
 
 I want dibs on the LJ when you sell it for SXS funding
 
 Sent from my SM-G960U using Tapatalk
 
 
 
 The suspension on them is just amazing.   Like a cloud of titties