Georgia Trail Riders Forum

CLASSIFIEDS => Wanted => Topic started by: Alex on July 30, 2008, 09:39:24 PM

Title: Need a stock yj Driveshaft
Post by: Alex on July 30, 2008, 09:39:24 PM
My driveshaft keeps burning up ujoint because the ears are bent.  I need one cheap
Title: Re: Need a stock yj Driveshaft
Post by: DOUG on July 30, 2008, 10:00:09 PM
Quote from: Alex on July 30, 2008, 09:39:24 PM
My driveshaft keeps burning up ujoint because the ears are bent.  I need one cheap

Check this out. Hope it works out for you.

http://cgi.ebay.com/ebaymotors/1310-CV-Driveshaft-Jeep-RockCrawler-SYE-Rock-crawler_W0QQcmdZViewItemQQcategoryZ33729QQihZ012QQitemZ220261626612QQrdZ1QQsspagenameZWDVW (http://cgi.ebay.com/ebaymotors/1310-CV-Driveshaft-Jeep-RockCrawler-SYE-Rock-crawler_W0QQcmdZViewItemQQcategoryZ33729QQihZ012QQitemZ220261626612QQrdZ1QQsspagenameZWDVW)

This auction use for a used balanced strong CV driveshaft in great shape. Why pay $250-$300 for a new one when this one is like new? Perfect for Jeeps, Rock crawlers buggies and much more. The CV is a 1310 as well as the axle yoke. Comes with bolts for the CV. The driveshaft is 29" from center of joint to center of joint collapsed and 33 1/2" fully extended. This shaft should work for Jeep Cherokees with an sye and up to 4" of lift, please double check your application before bidding. Thanks and goodluck bidding.

(http://i10.ebayimg.com/04/i/001/00/a8/a932_1.JPG)
Title: Re: Need a stock yj Driveshaft
Post by: Will on July 30, 2008, 10:06:37 PM
 Alex, I've still got that TJ rear shaft if it will do you any good... you never messaged me back.  :'(
Title: Re: Need a stock yj Driveshaft
Post by: Alex on July 31, 2008, 11:36:32 AM
Sorry will i have been busy with class.  I got one from a tj but i need one out of a yj because it is longer.  I stretched my jeep about 3 inches.  I am doing to do a SYE over christmas but i cant do it now.  I can get a SYE and Driveshaft for $325.
Title: Re: Need a stock yj Driveshaft
Post by: DOUG on July 31, 2008, 11:44:13 AM
Quote from: Alex on July 31, 2008, 11:36:32 AM
Sorry will i have been busy with class.  I got one from a tj but i need one out of a yj because it is longer.  I stretched my jeep about 3 inches.  I am doing to do a SYE over christmas but i cant do it now.  I can get a SYE and Driveshaft for $325.

Have you measured it at rest?  What length do you need?
Title: Re: Need a stock yj Driveshaft
Post by: DILYSI Dave on July 31, 2008, 04:36:26 PM
I've got a stock one that needs a new U-Joint.  Give me enough $ to cover the cost of the U-joint I was going to snag before I tossed it, and it's yours.  Yu going to be at the AllSouth show?