Georgia Trail Riders Forum

CLASSIFIEDS => Wanted => Topic started by: TheSouthernBird on January 17, 2009, 07:25:56 PM

Title: Ford Stuff. Bronco II/Explorer
Post by: TheSouthernBird on January 17, 2009, 07:25:56 PM
OK,
if anyone has, knows where one is or will keep an eye out, I am in need a 1991 ford explorer 4.0 4x4. preferably one under $1,000.00. body condition doesn't matter, blown motor, bad trans ok,..as I am really after the axles,springs, motor, computer, radiator etc.  for my bronco build.(http://i304.photobucket.com/albums/nn176/Georgiagamefowl/s17.gif)

I am also in need of a 1350 manual shift Tcase with the shifter, shifter boot & linkages for A4LD transmission..
&...I think that's it..
(http://i304.photobucket.com/albums/nn176/Georgiagamefowl/s1.gif)



 
Title: Re: Ford Stuff. Bronco II/Explorer
Post by: ranger11 on January 17, 2009, 09:50:30 PM
Does it have to be 91?

Im pretty sure this is 4x4 look at the front wheels looks like auto hubs to me

http://atlanta.craigslist.org/ctd/993901559.html


Here is what you need

http://atlanta.craigslist.org/cto/987051531.html

http://atlanta.craigslist.org/cto/982816565.html

http://atlanta.craigslist.org/cto/973401590.html

Title: Re: Ford Stuff. Bronco II/Explorer
Post by: TheSouthernBird on January 17, 2009, 10:38:16 PM
awesome deals.. I  emailed a few of them..

the only reason I say 91 is that from what I have been reading on the BII 4.0 dana 35 & 8.8 conversion
 the 91 4 door explorer works best as the wiring for the motor swap is mostly plug & play..  after 91 they seem to get weird & harder to wire everything up. tons of splicing etc. 
I am sure I could make a later model work. but the easier I can make it on my self, the better off I am..lol

I do think some rangers may even work.. do you know if 91 rangers had the 4.0, d35 front & 8.8 rears?..

they say to bring as much from the explorer as possible.
motor, wiring, computer, radiator, trans & of course the running gear.. going to rebuild everything while its out anyways so finding one with a bad engine or tran should be the cheapest route. unless I get lucky.. 

should be a fun project..

(http://i304.photobucket.com/albums/nn176/Georgiagamefowl/s1.gif)



Title: Re: Ford Stuff. Bronco II/Explorer
Post by: ranger11 on January 17, 2009, 10:49:32 PM
The rangers do have 4.0s and 8.8 d35 Im not sure the year they started with the 8.8 the first year for the 4.0 was 90 I think that was the the first year for the 8.8.

Ingnore all of the above click this  http://therangerstation.com/tech_library/Axles.html
Title: Re: Ford Stuff. Bronco II/Explorer
Post by: TheSouthernBird on January 17, 2009, 10:59:19 PM
sweet,
think I should keep with the explorer..
 love the codes!!
that's some nice information to have.. will print that off for future junk yard ventures..
thanks!