Georgia Trail Riders Forum
MEMBERS DISCUSSION AREA => General Discussion => Topic started by: Dustin88 on May 16, 2009, 09:00:06 PM
-
I need two factory body bushings( the rubber that goes between the body and frame for a jeep tj?
-
yea.. I have almost a complete set of factory body mounts. They are off my 2000 TJ. I used 2 of them for my driving light mounts but all the others are there. If you are interested, let me know... I live in Brunswick GA. I will ship some of them or all of them .. at your expense of course... It shouldn't be to pricy...
let me know..
Mike
-
Mike, you could probably fit a couple in a flat rate $5 USPS priority package.
-
Oh yea.. If all he wants is the 2 I can mail them in a brown envelope with no problems... It is according to what he needs. I will need to know which ones he needs. I think the front ones are different from the rear ones and not sure about the ones on the sides.. I think they were the same.. I would have to look at them to see if there was a difference..
-
If you are interested.. PM me your name and address and which ones you need..
Mike'
-
Yes I need 2 of them!
I need the very front one and one of the second to front ones(under the drivers floorboard)
What do you want for two of them shipped to 30152(Kennesaw)
Do you want me to pay you through paypal?
I will pay you as soon as I figure out a price and a method of payment.
Thanks
Dustin
Also would you happen to have two 3" body lift pucks?
-
No charge for the mount. You only want 2 I can ship them for free. I just need to be sure which ones you need. I will walk out to the shop and take a photo of what I have. Let me know which you need. I don't remember which ones go where. I swapped mine out for 1" BL..
{ehm} {ehm}
Go ahead and send me your name and mailing address. You can either post it here or send me a PM just in case you don't want everybody in the world to know where you live... hahah..
I will get my wife to mail them in the am so they will be on their way...
-
Here is a photo of the kind of bushings I have..
they each have part numbers on them. If you had those it would be great..
[attachment deleted by admin]
-
Hey, I dont have part numbers but I think I need one of the bigger ones(left in your picture) and one of the smaller ones(middle of your picture). Which would be 4 total pieces since each body mount has two halfs. Also if you have the metal washers that go on top of the body mount that would be great(They may be attached already)
Thanks so much for shipping those to me, I could not find anywhere that sold individual body mounts and I did not want to pay $100 for a full set!
I pmed you my address.
Thanks again
Dustin
-
I gotcha. I am going to take a photo of what I am sending.. Let me know if it is correct.. If so I will ship in the am..
-
This is what I am mailing....
Let me know if it is wrong...
[attachment deleted by admin]
-
Thats looks right, I cant tell from the pic, but one of the big and one of the small should have a metal sleeve coming out of it.
Thanks
Dustin
-
the small one has a metal washer attached to the top of it. As for the metal bushing inserts, I had to reuse them with my 1" BL..
Will this be okay??
-
Hey Rockinwrangler, I got the bushing in today, thanks alot for helping me out, I owe you one.
Thanks
Dustin
-
That's great Dustin. Hope they work for you..
Mike'