Georgia Trail Riders Forum
CLASSIFIEDS => Wanted => Topic started by: ADAM on August 18, 2009, 09:53:47 AM
-
If anyone has a front d60 and a rear corp 14bolt that they need to get rid off let me know...
-
You making some lawn ornaments or something. I know it's not for anything you would be wheeling. ;D
-
yep wanna see how much useless crap i can pile up in my new garage ;)
-
:D Yeah, that is it! So when can we see the blue balls again?
-
:D Yeah, that is it! So when can we see the blue balls again?
Whoa!! :o
I knew more happened on that Moab trip than we knew about.
-
{peek}
-
You homos... I WAS REFERING TO HIS JEEP. {bruce}
-
You homos... I WAS REFERING TO HIS JEEP. {bruce}
Us homos? I'm not the one wanting to see Adam's blue balls... ;D
And if you're refering to his actual Jeep, you could've just been like "Adam, when are you gonna make it out on another ride, douche bag?" Not, "Adam, I haven't seen your blue balls since Moab... I miss 'em... :'("
;D ;D ;D
-
{hardlaugh} {hardlaugh} {hardlaugh}
-
You homos... I WAS REFERING TO HIS JEEP. {bruce}
Us homos? I'm not the one wanting to see Adam's blue balls... ;D
And if you're refering to his actual Jeep, you could've just been like "Adam, when are you gonna make it out on another ride, douche bag?" Not, "Adam, I haven't seen your blue balls since Moab... I miss 'em... :'("
;D ;D ;D
Daniel, too much detail. Something is a foot.
-
{btt}
FIND ME SOME AXLES
-
What for? {ehm}
-
dont worry about what for just find me my axles.
-
Ok, I find axles, you let me have the 44's.
-
i give you a good deal on em {cool}
-
im gettin um
-
I asked 1st!
-
{no} only on here maybe...
I have a feeling someone has a lot of labor cut out for himself.
-
Do you want Driver side drop front or Passanger side drop?
Do you want Ball joint or King Pin front?
Do you want a full floater 14 bolt? I know where one is right now with LSD in it.
-
You know, I might be the only person on here who can actually say that I talked to Adam, face-to-face about this. He told me, everyone else (Matt and Ben) can suck it, 'cause I'm getting that 44 for the front of the Ranger. He said you 2 could fight it out over the rear 44. :D
-
{letseat} Lets go Matt!!! I'm callin you out! I won't mess with Daniel, he's unkempt.
-
{letseat} Lets go Matt!!! I'm callin you out! I won't mess with Daniel, he's unkempt.
You won't mess with me because I'm unkempt? You mean, my fighting is off the wall and you won't know which direction your knockout is coming from, right? That's what it is. I'm far from unkempt........... fella.
-
()()
-
lary I am loking for a full float 14 bolt 10.5
-
()()
Here's an idea... maybe you can offer that to Adam and skip the fight with Matt...
-
()()
Here's an idea... maybe you can offer that to Adam and skip the fight with Matt...
HAHAHA. This just deserved to be quoted.
-
()()
Here's an idea... maybe you can offer that to Adam and skip the fight with Matt...
HAHAHA. This just deserved to be quoted.
X2 ;D
-
;D Yeah, that was good. Adam would go for it!
-
http://atlanta.craigslist.org/eat/pts/1316605796.html (http://atlanta.craigslist.org/eat/pts/1316605796.html)
http://tampa.craigslist.org/psc/pts/1311661757.html (http://tampa.craigslist.org/psc/pts/1311661757.html)
http://easttexas.craigslist.org/pts/1330638717.html (http://easttexas.craigslist.org/pts/1330638717.html)
http://columbus.craigslist.org/pts/1320156078.html (http://columbus.craigslist.org/pts/1320156078.html)
-
Going to be doing some driving Doug? lol
-
;D Yeah, that was good. Adam would go for it!
I know he would. I'd call him up and see what he says. You could get a 44 for the rear...just by takin it in the rear. Har har har!!!
-
So how was he... seriously. Did it hurt Daniel? :D
-
So how was he... seriously. Did it hurt Daniel? :D
Honestly, I wouldn't know. I figured you might though. I thought you and Doug were wearing him out as much as he complained about his butt hurting. Just give hima call. From the way he talks, you won't even know he's back there.
-
{hardlaugh}
{no}
-
{btt}
I am going to pick up my 14 bolt tomorrow {letseat}.
But I NEED a 78-79 Front Dana 60. would like king pin but will settle for ball joint.
-
But I NEED a 78-79 Front Dana 60. would like king pin but will settle for ball joint.
Showed you earlier, kingpin 60!
http://atlanta.craigslist.org/eat/pts/1316605796.html (http://atlanta.craigslist.org/eat/pts/1316605796.html)
{bling} {bling}
-
But I NEED a 78-79 Front Dana 60. would like king pin but will settle for ball joint.
Showed you earlier, kingpin 60!
http://atlanta.craigslist.org/eat/pts/1316605796.html (http://atlanta.craigslist.org/eat/pts/1316605796.html)
{bling} {bling}
hey doug let me borrow some dough till dec when i get my bonus hehe
-
But I NEED a 78-79 Front Dana 60. would like king pin but will settle for ball joint.
Showed you earlier, kingpin 60!
http://atlanta.craigslist.org/eat/pts/1316605796.html (http://atlanta.craigslist.org/eat/pts/1316605796.html)
{bling} {bling}
hey doug let me borrow some dough till dec when i get my bonus hehe
Sure, I'm like titlemax, just let me hold the Rubi title and a lien doc.
Seriously, they are selling for that nationally. They are getting fewer and the price is headed up. I'm sure he'll cut ya some slack. $1000 would be a screaming good deal.
-
no problem done
-
{btt}
I am going to pick up my 14 bolt tomorrow {letseat}.
But I NEED a 78-79 Front Dana 60. would like king pin but will settle for ball joint.
So did you work out a deal with my friend?
Going to be very hard to find the 78-79 front for a decent price.I have seen two for sale in the last 3-4 years. One of those is under my Tj (Thanks Doug ;D )and the other is under Jimmy's Xj. 87 to 91 is your next best bet for a king pin, little less room on the driver side but still a great axle to use.
-
Showed you earlier, kingpin 60!
http://atlanta.craigslist.org/eat/pts/1316605796.html (http://atlanta.craigslist.org/eat/pts/1316605796.html)
D@mn! Talk the guy down and jump on it.
-
Just look here Adam: http://pirate4x4.com/forum/forumdisplay.php?f=32
Most deals on there are on the left coast, but some good stuff pops up around here from time to time.
-
Just buy this instead, and save money. Sell the Rubi.
http://www.southernjeeps.org/phpbb/viewtopic.php?t=31639&highlight= (http://www.southernjeeps.org/phpbb/viewtopic.php?t=31639&highlight=)
-
So did you work out a deal with my friend?
Maybe, I got another guy in rockmart that is a little closer that only wants 200 for his 14 bolt. Your guy said $400 but he would take other offers so I will call chad in the am saturday and see if we can work a deal since he is a little further than rockmart.
-
ssssooooo, where are the 44's goin? ;D
-
http://ocala.craigslist.org/pts/1313426027.html what u think?
-
http://ocala.craigslist.org/pts/1313426027.html what u think?
You could prob. part it and get some of your money back, I found Jimmy the same truck here in Atl for $500, that is a deal that aint gonnna ever happen again. Ask for pictures of the front end before you drive down there. Snowfighter edition is rare.
-
http://ocala.craigslist.org/pts/1313426027.html what u think?
You could prob. part it and get some of your money back, I found Jimmy the same truck here in Atl for $500, that is a deal that aint gonnna ever happen again. Ask for pictures of the front end before you drive down there. Snowfighter edition is rare.
Never mind I just reread it and saw it was a 1 ton, but I would still want to see pictures of the axles.
-
Since its an F-350, won't it be a 70 in the rear?
-
Since its an F-350, won't it be a 70 in the rear?
{ehm} {ehm} {ehm} {ehm}
-
I think it should be a 70. Adam, see if he can get you the BOM numbers off the axles. Rear should be 603935 if its a 70 and front should be 610023 if its a 60. You should be able to get some money back off the motor since it runs, but you still might end up paying $1500ish for the axles.
(http://www.therangerstation.com/tech_library/images/D60_id.jpg)
-
Adam, You back from picking up that 14 bolt?
-
no I couldn't get daniel to go so no truck I called the guy and said I would pick it up friday
-
no I couldn't get daniel to go so no truck I called the guy and said I would pick it up friday
Well, you didn't really ask me, but I guess I'm glad you didn't. This is all the more reason for me to get rid of a truck all together. Since I'm the only person anyone seems to know with a truck, I'm automatically the one called to go pick crap up.
I thought you said you would ask Joe to use his truck. I already told you that I think a wheel bearing is going out and a CV axle...
-
heres a rear 60 for ya:
http://www.southernjeeps.org/phpbb/viewtopic.php?t=31372 (http://www.southernjeeps.org/phpbb/viewtopic.php?t=31372)
$300 isnt a bad deal...
-
A rear 60 is about 150 in the Jy they are not hard to find ,a 14b cost the same. Its the front that cost so much ask me how I know. {popcorn}
-
A rear 60 is about 150 in the Jy they are not hard to find ,a 14b cost the same. Its the front that cost so much ask me how I know. {popcorn}
that one has yukon 5.13s and a spool.
-
A rear 60 is about 150 in the Jy they are not hard to find ,a 14b cost the same. Its the front that cost so much ask me how I know. {popcorn}
- told you i found you one-- you call him yet?
-
You talking about that one on CL? I'm pretty sure its a 44.
-
yeah,, its a 60 out of a dodge.
-
A rear 60 is about 150 in the Jy they are not hard to find ,a 14b cost the same. Its the front that cost so much ask me how I know. {popcorn}
How do you know, Richard?
-
Richard called him and said its 5x5.5 bolt pattern out of a 1500, I don't think its a 60.
-
Richard called him and said its 5x5.5 bolt pattern out of a 1500, I don't think its a 60.
HAHAHA {hihi}
-
I guess the kid just didn't know what he had since they look pretty much the same aside from the 60 housing being a hair bigger.
-
wht????
-
Will a 89 F350 front dana 60 work?
and
how strong is a 10.25 sterling rear?
-
I think those are the years with the REALLY narrow driver side axle tube.
Sterling is strong, but parts aren't as common (ie cheap) as for 60s, 70s and 14 bolts.
-
I think those are the years with the REALLY narrow driver side axle tube.
Sterling is strong, but parts aren't as common (ie cheap) as for 60s, 70s and 14 bolts.
What Jimmy said, but if you are going coil overs up front I don't think you will have many issues.
-
either coil overs or air shocks.
the pinion is fine though right?
-
I believe they are high pinion if thats what you're asking.
-
no i should have been more specific
The pinion center line to knuckle center line is about 3.5" more to drivers side than 78-79.
Will this affect how it bolts up to the transfer case?
-
No it will not be a problem. there are a few people on pirates that are using them. As long as you are not going to use coils, you should be fine
-
durde-- no prob --- im running dana 60 front and rear -- 6.5 front coilds form rustys -- and bauster packsin the rear with 2 in shachels in rear-- -- going to try to clear 40'3 --- good comb - but what do i know -- im torr.
-
durde-- no prob --- im running dana 60 front and rear -- 6.5 front coilds form rustys -- and bauster packsin the rear with 2 in shachels in rear-- -- going to try to clear 40'3 --- good comb - but what do i know -- im torr.
(http://smiley.onegreatguy.net/drink.gif)
-
durde-- no prob --- im running dana 60 front and rear -- 6.5 front coilds form rustys -- and bauster packsin the rear with 2 in shachels in rear-- -- going to try to clear 40'3 --- good comb - but what do i know -- im torr.
(http://smiley.onegreatguy.net/drink.gif)
{hardlaugh} - No doubt!!
-
will this work in the front?
http://atlanta.craigslist.org/nat/pts/1511419745.html
-
It could work but it has ball joints and probably has the weird metric bolt pattern.
-
It could work but it has ball joints and probably has the weird metric bolt pattern.
I'm convinced that ball joints are OK for guys like us. I'm not saying I wouldn't like to have them and that they aren't better, but just not necessary for guys like us.... Now if you're building a comp buggy....
-
The ball joints will be fine. Unless you plan on running 44's and a V8 you shouldn't ever have a problem out of them. {toast}
-
I think adam is going for something like this....
http://houston.craigslist.org/cto/1514722201.html
For those to lazy to click...
(http://images.craigslist.org/3kd3o23l05O55Qa5Pd9chce6f71f6c9f212ad.jpg)
-
I think adam is going for something like this....
http://houston.craigslist.org/cto/1514722201.html
For those to lazy to click...
(http://images.craigslist.org/3kd3o23l05O55Qa5Pd9chce6f71f6c9f212ad.jpg)
LMAO! Would look good with 46's!
-
Matt, if that's what's in store, I don't feel comfortable participating in that. As little as I care about Jeeps, I still couldn't consciously help do that...sorry.
-
I think I would have just left the s10 body on that frame...
-
Found what I needed thanks to Santa aka Doug