Georgia Trail Riders Forum
CLASSIFIEDS => Wanted => Topic started by: smcnick on May 28, 2010, 10:08:39 PM
-
I want to go offroading but my driveshaft fell off about an hour ago.
Anyone have a stock one they feel like getting rid of?
Thanks.
Sean
mcnicholas.sean@gmail.com
-
There are plenty of stock ones floating around, just need to know what vehicle ???
What happened, u-joint break? They are cheap and easy to replace...
-
92 Wrangler 4.0 I believe.
-
I'm a retard, shoulda clicked the name :P
-
yes, it is a 92 auto 4.0 6cly
the yolk, going into the tranny, broke one one side, and the drive shaft broke on the other side of the joint...
im just really glad i was only going about 20 when it happened.
I took the driveshaft off of the diff and drove home with in in 4wd.
a FWD wrangler does not drive right...at all... haha
-
yes, it is a 92 auto 4.0 6cly
the yolk, going into the tranny, broke one one side, and the drive shaft broke on the other side of the joint...
im just really glad i was only going about 20 when it happened.
I took the driveshaft off of the diff and drove home with in in 4wd.
a FWD wrangler does not drive right...at all... haha
Better check the ATF in the transfer case now also, Unless you have a SYE it will blow ATF out as you go since there is nothing in the back to seal it.
-
holy crap, i would not have drove it home unless i lived like 400ft away, ATF leaking for one, but the last time i tried to cruze home on only the front drivetrain- i ripped my tcase to bits..... {hihi}
-
yes, all the ATF fell out, and I was only about 300ft from home.
Anyone got an extra rear driveshaft?
-
yes, all the ATF fell out, and I was only about 300ft from home.
Anyone got an extra rear driveshaft?
Rockinwrangler has one for a tj but I dont know if it is the same as a yj.
-
I've got one here also for a TJ, not sure if it's the same either, I also have a spare YJ but it's for a AX-15 you are welcome to borrow the YJ one ar have the TJ one if it will work. Can you give me a length?
-
I'm a retard, shoulda clicked the name :P
{hihi} well played sir......
-
I do have a rear drive shaft. It came out of a :
2000 TJ with D44 rear... 3spd Automatic
-
{ehm} post, asking for item, and zero repliz on the offers........ :bs)
-
Mark, if I could try them out that would be great.
Where are you located, dunwoody/sandysprings area here, North of Atl.
RockinWrangler, do you think it might?
Rich, leave me alone, I was working last night. And I don't understand why you care so much since you cannot help me.
Thats how I roll.
Mark, Rockin, and Rabun thanks for your help.
-
Mark, if I could try them out that would be great.
Where are you located, dunwoody/sandysprings area here, North of Atl.
RockinWrangler, do you think it might?
Rich, leave me alone, I was working last night. And I don't understand why you care so much since you cannot help me.
Thats how I roll.
Mark, Rockin, and Rabun thanks for your help.
AWWWW, come on now dont get your panties in a wad, im sure some one here has what you need, mark is located down here on the south side with me and brandon.... have a {toast} and get your shit fixed..... u stick around here long enough and youll catch hell sometime or another... {hihi} ,
-
I think there is a Wrangler junkyard somewhere north of Atlanta, maybe someone that knows more can chime in. Sucks that Wranglers never show up in "regular" junkyards and when they do they are $$$ or stripped to the frame.
Edit: found one down here in Warner Robins for $75. What a rip off for a stock, used shaft.
Also, if it makes you feel better, drich has a big gold penis painted on the roof of his Jeep {hihi}
-
well jimmy, ,, thsi is war,, you a$$
-
As Ryan, (drich) said, I'm on the Southside, Google Locust Grove. The YJ one is my spare and isn't balanced, but I thought you were trying to wheel this weekend and I was willing to loan it to you if it would work. The TJ one is one that one of the other members on this board brought me to give to someone in need. So if it will work for you, you are welcome to have it. Find me a measurement for the shaft and I will measure this one. I know it's a TJ, not sure if it's a 4 banger or 4.0, auto or straightshift.
-
I found a stock one brand new for 185.99 thinking about that. says its for 93-95 14 7/8th, i feel mine is shorter than that.
Im looking into the TJ applications.
I need to measure mine, not back at home yet so cant.
drich, ryan, i am not a fan of taking shit when i'm asking for help. If i was being cocky I would understand. Either way, I love beer and will repay in that if i can get a free drive shaft, haha
-
Ryan wasnt talking shit. He was just being Ryan. But since you just signed up and didnt read anything he posts you didnt know. Btw good luck on a free shaft. Jimmy will give you one but it wont be free.
Ps. Hang out, Introduce yourself and your jeep. http://www.gatrailriders.com/GTRForums/index.php?board=40.0
-
I found a stock one brand new for 185.99 thinking about that. says its for 93-95 14 7/8th, i feel mine is shorter than that.
Im looking into the TJ applications.
I need to measure mine, not back at home yet so cant.
drich, ryan, i am not a fan of taking shit when i'm asking for help. If i was being cocky I would understand. Either way, I love beer and will repay in that if i can get a free drive shaft, haha
,,, ummm , not free shafts here, id run a square tube, but since this is probly ur DD, a balanced one is the defenitive way togo, as for a new , save ur $ and try one of the ones the guys on here have....and like i said before,,,,,,,,, take things with a grain of salt around here, there are a ton of others that post on here that have a much larger vulgar vocal that I.... good luck newb
-
You can't even quote correctly, you tard.
Nick for $185, I'd probably save a few extra pennies and upgrade to a SYE with a CV shaft.
-
Jimmy, I do not know what that means, if you could explain it or point me in a direction to learn about it I would appreciate it.
drich, I dont know where that quote came from, but you are the only one treating me like a "newb" and the only one being a DICK! or even rude. So, my panties are not in a wad, I just want my car running again.
Unless you have something constructive or kind to say, dont waste my time.
Again to the rest of you, thank you for your help.
I need a 14 7/8 th driveshaft for a 92 YJ 4.0 auto
drich, i do have to thank you for the often forum bump.
-
{hihi} {nln2} u,, and Jimmys got, if you were going to spend that much on a new shaft then go the the SYE , its a slip yoke elimantor., you saw how the shaft just pulled out of the rear of your t-case, thats the "slip yoke", the SYE kit replaces that with real yoke as on the front end of your t-case, even cheaper than that is a hack-n-tap,
-
{popcorn} {hihi}
-
Dang you mean Ryan has a clue about jeeps?
-
Dang you mean Ryan has a clue about jeeps?
No, he copied the information from another forum {hihi}
-
Dang you mean Ryan has a clue about jeeps?
No, he copied the information from another forum {hihi}
I know the info didn't come from me, and it must not have came from you, so he must have called Jimmy. I don't think anyone else will talk to him. ;D
-
Dang you mean Ryan has a clue about jeeps?
No, he copied the information from another forum {hihi}
I know the info didn't come from me, and it must not have came from you, so he must have called Jimmy. I don't think anyone else will talk to him. ;D
Nope, my phone was in my desk all day and I never heard it ring. Think he passed out after writing that?
-
aruggg, ummm {ehm} what happened, i just woke up?,
-
I have a driveshaft out of a 91 4.0/AX15/NP231/D35. I think this is what you need. I had replaced the joints in it shortly before I swapped in a SYE / CV.
Make offer. Offer can be less than $185.99, but should be more than the cost of the fresh-ish U-Joints.
-
drich would know all about catchin shit... since he is 8==D 3:) so dont let him bother you... grow some thick skin... i mean come on you join up and start askin for parts... what were you thinkin...
i hope that you do get your jeep fixed... sorry i cant help...
-
ohhhhh, the cum gusaler calls me 8==D ?? , {no} , well i hope that dude gets hes junk fixed, hes got like 3 people offering him parts.... {btt} , MIke......... :PV
-
dude really... i am starting to think that you and Tony are one in the same person... since both of you like the protein shakes... why do you think i dont like to camp out when you guys are around... my ()() is scared... i can hear it now... "Psst hey MikeD you sure do got a pretty mouth".. then next thing you know guns go off just bad shit happens... LOL...
-
dude really... i am starting to think that you and Tony are one in the same person... since both of you like the protein shakes... why do you think i dont like to camp out when you guys are around... my ()() is scared... i can hear it now... "Psst hey MikeD you sure do got a pretty mouth".. then next thing you know guns go off just bad shit happens... LOL...
{bang}
-
{popcorn}
-
{popcorn} metoo,,,,, mike's too busy sucking glenn's 8==>
-
ouch...
-
:o that's what 'Glenn' said when he bit/......